Bowers export catalogue 2013 low web by Industrial Tooling

PRODUCT CATALOGUE 13/14

Partners in Precision

INTRODUCTION

Introduction The Bowers Metrology range of precision measuring instruments is present in over 50 countries, across 6 continents, supported by a network of exclusive agents. The Bowers brand is strong throughout the world and is associated with the highest quality in measuring equipment. Maintaining our leading position in the increasingly competitive Metrology industry has required us to stay at the forefront of product innovation. Bowers’ principal product range centres on internal measuring equipment; in particular bore gauging and internal micrometers – both mechanical and electronic. Core products include the Bowers XT range of Bore Gauges; XT Analogue, XT Digital Xtreme, XT Holematic and what is recognised as the Gold Standard in bore gauging; the Ultima Electronic Bore Gauge. The new MicroGauge small diameter bore gauge, XTL lever gauge and XT500 large diameter gauge extend this range even further. Complementing the Bore Gauging range sits an array of allied products; including Universal Gauging, Large Diameter Gauges, SmartPlugs, Snap Gauges, Air Gauges and Calipers, providing Bowers’ customers with innovative solutions to a wide range of measuring tasks. Added to the superior range of precision measuring instruments, Bowers’ on-site UKAS calibration laboratory ensures many of its products receive a certificate of calibration fully traceable to National Standards, giving its customers confidence in the high quality of the products and services supplied by Bowers Metrology.

For more information visit www.bowersmetrology.com

CONTENTS Contents XTA Analogue Bore Gauge

Pages 4-5

XTD Digital Bore Gauge

Pages 6-7

XT Holematic Digital Pistol Grip Bore Gauge

Pages 8-9

MicroGauge 2-point Bore Gauge

Pages 10-11

XT Lever Bore Gauge

Page 12

XTHSY Pistol Grip Bore Gauge with Indicator

Page 13

Ultima Electronic Bore Gauge XT500 Large Diameter 3-point Bore Gauge

Pages 14-16 Page 17

Bowers Air Gauging

Pages 18-21

Special Bore Measurement

Pages 22-27

SmartPlugs

Pages 28-33

Digital and Mechanical Cylinder Bore Gauges

Pages 34-35

Universal Gauge

Pages 36-40

Universal Gauge Special Applications Checkmaster Comparator

Page 41 Pages 42-44

INTEX Internal/External Beam Gauge

Page 45

Carbon Fibre Comparator Beam Gauge

Page 46

Snapmic Digital Indicating Micrometer

Page 47

Snapmatic Snap Gauge

Page 48

Rivet Height Gauge/Digital Countersink Gauge

Page 49

UniCal Universal Digital Caliper

Page 50

Major Calipers

Page 51

Wireless Data Transmission

Page 52

Tel: +44 (0)1274 223 456 Fax: +44 (0)1274 223 444

Partners in Precision

BORE GAUGING Analogue Bore Gauges Bowers XT Analogue Bore Gauges are an economical solution to accurate shop-floor bore measurement. The extended mechanical travel of these advanced two or three point gauges ensures that exchanging measuring anvils is now unnecessary. Their wide application range, 2-300mm, rugged construction and easy read scale, ensure both accuracy and ease of use. XT measuring heads and setting rings are supplied with UKAS certification.

Features • Range 2-300mm (0.080"-12") • 2-6mm 2 point / 6-300mm 3 point measurement • Graduation 2-6mm: 0.001mm, 6-300mm: 0.005mm • Graduation 0.080"- 1/4": 0.0001", 1/4"-12": 0.00025"

XT SERIES SETTING RINGS

• Tungsten carbide measuring faces on all 3-point heads from 12.5mm • Blind bore measurement from 2mm-6mm and above 12.5mm (0.500") • Extensions available above 6mm for deep hole measurement • Ratchet stop to ensure consistent measurement • Setting rings included with individual instruments and sets • UKAS certificates supplied as standard with all setting rings • UKAS certificate supplied as standard with all XT mechanical micrometers • Serial number on all gauges • Bore gauges manufactured according to DIN 863, part 4 • Supplied in fitted wooden case

For more information visit www.bowersmetrology.com

Code No XTR3M(I) XTR5M(I) XTR7M(I) XTR8M(I) XTR12M(I) XTR20M(I) XTR35M(I) XTR65M(I) XTR80M(I) XTR125M(I) XTR175M(I) XTR225M(I) XTR275M(I)

Setting Rings (mm) (inch) 2.5 0.1000 4.00 0.1600 5.00 0.2000 8.00 0.3125 12.50 0.500 20.00 0.750 35.00 1.375 65.00 2.625 80.00 3.250 125.00 5.000 175.00 7.000 225.00 9.000 275.00 11.000

BORE GAUGING Analogue Bore Gauges TECHNICAL SPECIFICATION: Individual instruments supplied with setting ring and UKAS Code No (mm) XTA1M XTA2M XTA3M XTA4M XTA5M XTA6M XTA8M XTA10M XTA12M XTA16M XTA20M XTA25M XTA35M XTA50M XTA65M XTA80M XTA100M XTA125M XTA150M XTA175M XTA200M XTA225M XTA250M XTA275M

Range (mm) 2-2.5 2.5-3 3-4 4-5 5-6 6-8 8-10 10-12.5 12.5-16 16-20 20-25 25-35 35-50 50-65 65-80 80-100 100-125 125-150 150-175 175-200 200-225 225-250 250-275 275-300

Code No (inch) XTA1i XTA2i XTA3i XTA4i XTA5i XTA6i XTA8i XTA10i XTA12i XTA16i XTA20i XTA25i XTA35i XTA50i XTA65i XTA80i XTA100i XTA125i XTA150i XTA175i XTA200i XTA225i XTA250i XTA275i

Range (inch) 0.080-0.100 0.100-0.120 0.120-0.160 0.160-0.200 0.200-0.250 1/4-5/16 5/16-3/8 3/8-1/2 1/2-5/8 5/8-3/4 3/4-1 1-1 3/8 1 3/8-2 2-2 5/8 2 5/8-3 1/4 3 1/4-4 4-5 5-6 6-7 7-8 8-9 9-10 10-11 11-12

Accuracy (mm) 0.004 0.004 0.004 0.004 0.004 0.004 0.004 0.004 0.004 0.004 0.004 0.004 0.004 0.005 0.005 0.005 0.006 0.006 0.007 0.007 0.008 0.008 0.009 0.009

(inch) 0.00015 0.00015 0.00015 0.00015 0.00015 0.00015 0.00015 0.00012 0.00015 0.00015 0.00015 0.00015 0.00015 0.00020 0.00020 0.00020 0.00025 0.00025 0.00030 0.00030 0.00030 0.00030 0.00035 0.00035

Depth (mm) 9 9 12 18 18 58 58 58 62 62 66 66 80 80 80 100 115 115 115 115 118 118 118 118

Setting Ring (mm) 2.50 2.50 4.00 4.00 5.00 8.00 8.00 12.50 12.50 20.00 20.00 35.00 35.00 65.00 65.00 80.00 125.00 125.00 175.00 175.00 225.00 225.00 275.00 275.00

(inch) 0.35 0.35 0.47 0.70 0.70 2.28 2.28 2.28 2.44 2.44 2.62 2.62 3.15 3.15 3.15 3.94 4.53 4.53 4.53 4.53 4.65 4.65 4.65 4.65

(inch) 0.1000 0.1000 0.1600 0.1600 0.2000 0.3125 0.3125 0.500 0.500 0.750 0.750 1.375 1.375 2.625 2.625 3.250 5.000 5.000 7.000 7.000 9.000 9.000 11.000 11.000

SETS: Supplied with individual instrument, setting rings and UKAS Range (mm) 2-3 3-6 6-10 10-20 20-50 50-100 100-150 150-200

Code No (mm) SXTA1M SXTA2M SXTA3M SXTA4M SXTA5M SXTA6M SXTA7M SXTA8M

Measuring Heads 2 3 2 3 3 3 2 2

Setting Rings 1 2 1 2 2 2 1 1

Range (inch) 0.080-0.120 0.120-0.250 1/4-3/8 3/8-3/4 3/4-2 2-4 4-6 6-8

Code No (inch) SXTA1i SXTA2i SXTA3i SXTA4i SXTA5i SXTA6i SXTA7i SXTA8i

EXTENSIONS Code No EGX 0200 EGX 0400 EGX 0500 EGX 0001 EGX 0004

Length (mm) 63 76 100 150 150

(inch) 2.5 3.0 4.0 6.0 6.0

To Fit Heads (mm) (inch) 6-10 1/4-3/8 10-12.5 3/8-1/2 12.5-20 1/2-3/4 20-50 3/4-2 50-300 2-12

Tel: +44 (0)1274 223 456 Fax: +44 (0)1274 223 444

Blind Bore measuring above 12.5mm diameter (0.500")

Partners in Precision

BORE GAUGING Digital Bore Gauges Bowers XT Digital Xtreme internal micrometers give the operator the advantage of traditional quality ratchet gauges allied to advanced IP65 electronics. The extended mechanical travel of the XT range means that special heads can also be manufactured to accommodate users most awkward measuring problems. Measuring heads for threads, splines slots, grooves, deep-holes and many more applications are available on request. The Bowers XT range of internal micrometers can be supplied as individual instruments or in complete sets. All XT instruments give the user the advantage of extended measuring travel with fixed anvils and UKAS certification of both measuring head and setting ring as standard.

Features • IP65 Electronics

• Extensions available above 6mm

• Simple 2-button operation

• Ratchet stop to ensure consistent measurement

• Large easy-to-read display

• Setting rings included with individual instruments and sets

• 3 preset memories

• UKAS certificates supplied as standard with all setting rings

• RS-232C output

• UKAS certificates supplied as standard with all gauges

• Range 2 – 300 mm (0.080"-12")

• Serial number on all digital readouts and measuring heads

• 2-6mm 2 point / 6-300mm 3 point measurement

• Heads with special anvils available to suit specific customer requirements (e.g. threads, grooves, 2-point, spherical, splines etc)

• Resolution 0.001mm / 0.00005"

• Tungsten carbide measuring faces on all 3-point heads from 12.5mm • Bore gauges manufactured according to DIN 863, part 4 • Blind bore measurement from 2mm – 6mm and above 12.5 mm (0.500") • Supplied in fitted case

For more information visit www.bowersmetrology.com

BORE GAUGING Digital Bore Gauges TECHNICAL SPECIFICATION: Individual instruments supplied with digital display unit, head, ring and UKAS Code No (mm) XTD1M XTD2M XTD3M XTD4M XTD5M XTD6M XTD8M XTD10M XTD12M XTD16M XTD20M XTD25M XTD35M XTD50M XTD65M XTD80M XTD100M XTD125M XTD150M XTD175M XTD200M XTD225M XTD250M XTD275M

Range (mm) 2-2.5 2.5-3 3-4 4-5 5-6 6-8 8-10 10-12.5 12.5-16 16-20 20-25 25-35 35-50 50-65 65-80 80-100 100-125 125-150 150-175 175-200 200-225 225-250 250-275 275-300

Code No (inch) XTD1i XTD2i XTD3i XTD4i XTD5i XTD6i XTD8i XTD10i XTD12i XTD16i XTD20i XTD25i XTD35i XTD50i XTD65i XTD80i XTD100i XTD125i XTD150i XTD175i XTD200i XTD225i XTD250i XTD275i

Accuracy (mm) (inch) 0.004 0.00015 0.004 0.00015 0.004 0.00015 0.004 0.00015 0.004 0.00015 0.004 0.00015 0.004 0.00015 0.004 0.00015 0.004 0.00015 0.004 0.00015 0.004 0.00015 0.004 0.00015 0.004 0.00015 0.005 0.00020 0.005 0.00020 0.005 0.00020 0.006 0.00025 0.006 0.00025 0.007 0.00030 0.007 0.00030 0.008 0.00030 0.008 0.00030 0.009 0.00035 0.009 0.00035

Depth (mm) 9 9 12 18 18 58 58 58 62 62 66 66 80 80 80 100 115 115 115 115 118 118 118 118

(inch) 0.35 0.35 0.47 0.70 0.70 2.28 2.28 2.28 2.44 2.44 2.62 2.62 3.15 3.15 3.15 3.94 4.53 4.53 4.53 4.53 4.65 4.65 4.65 4.65

Display Unit XTDU2 ” ” ” ” XTDU6 ” XTDU10 ” ” XTDU20 ” ” XTDU50 ” ” XTDU100 ” ” ” XTDU200 ” ” ”

Setting Ring (mm) (Inch) 2.50 0.1000 2.50 0.1000 4.00 0.1600 4.00 0.1600 5.00 0.2000 8.00 0.3125 8.00 0.3125 12.50 0.500 12.50 0.500 20.00 0.750 20.00 0.750 35.00 1.375 35.00 1.375 65.00 2.625 65.00 2.625 80.00 3.250 125.00 5.000 125.00 5.000 175.00 7.000 175.00 7.000 225.00 9.000 225.00 9.000 275.00 11.000 275.00 11.000

SETS: Supplied with one digital display unit, heads, rings and UKAS Code No (mm) SXTD1M SXTD3M SXTD4M SXTD5M SXTD6M SXTD7M SXTD8M SXTD9M

Range (mm) 2-6 6-10 10-20 20-50 50-100 100-150 150-200 100-200

Code No (inch) SXTD1i SXTD3i SXTD4i SXTD5i SXTD6i SXTD7i SXTD8i SXTD9i

Range (inch) 0.080-0.250 1/4-3/8 3/8-3/4 3/4-2 2-4 4-6 6-8 4-8

Measuring Heads 5 2 3 3 3 2 2 4

Setting Rings 3 1 2 2 2 1 1 2

SXTD5M standard set

DEPTH STOP Code No DSTOP01

Range (mm) 2-6

Range (inch) 0.080-0.25

EXTENSIONS Code No EGX 0200 EGX 0400 EGX 0500 EGX 0001 EGX 0004

Length (mm) 63 76 100 150 150

(inch) 2.5 3.0 4.0 6.0 6.0

To Fit Heads (mm) 6-10 10-12.5 12.5-20 20-50 50-300

(inch) 1/4-3/8 3/8-1/2 1/2-3/4 3/4-2 2-12

DATA TRANSMISSION Code No XTiP001 XTiP002 XTiP003

Description Serial Data Output Cable USB Data Output Cable Wireless Powered Opto Module

Tel: +44 (0)1274 223 456 Fax: +44 (0)1274 223 444

Blind Bore measuring above 12.5mm diameter (0.500")

Partners in Precision

BORE GAUGING Holematic Pistol Grip Bore Gauge Bowers XT Holematic Xtreme bore gauge incorporates an ergonomic pistol grip handle with an advanced trigger action, giving the user the advantages of both speed of operation and a constant measuring pressure. The clear digital display, superior IP65 electronics and application range of 2 to 300mm ensures ease of use and assured accuracy. The XT Holematic pistol grip range of bore gauges can be supplied as individual instruments or in complete sets. All XT instruments give the user the advantage of extended measuring travel with fixed anvils and UKAS certification of both measuring head and setting ring as standard.

Features • IP65 Electronics

• Blind bore measurement from 2-6mm and above 12.5mm (0.500")

• Simple 2-button operation

• Extensions available above 6mm

• Large easy-to-read swivel display

• Setting rings included with individual instruments and sets

• 3 preset memories

• UKAS certificates supplied as standard with all setting rings

• RS-232C output

• UKAS certificates supplied as standard with all pistol grip gauges

• Self-centring heads

• Serial number on all gauges and measuring heads

• Constant measuring pressure

• Heads with special anvils available to suit specific customer requirements (e.g. threads, grooves, 2-point, spherical, splines etc)

• Fast, accurate measurement • Range 2-300mm (0.080"-12") • 2-6mm 2 point / 6-300mm 3 point measurement

• Bore gauges manufactured according to DIN 863, part 4 • Supplied in fitted case

• Resolution 0.001mm (0.00005") • Tungsten carbide measuring faces on all 3-point heads from 12.5mm

For more information visit www.bowersmetrology.com

BORE GAUGING Digital Pistol Grip Bore Gauge TECHNICAL SPECIFICATION: Individual instruments supplied with digital display unit, head, ring and UKAS Code No (mm) XTH1M XTH2M XTH3M XTH4M XTH5M XTH6M XTH8M XTH10M XTH12M XTH16M XTH20M XTH25M XTH35M XTH50M XTH65M XTH80M XTH100M XTH125M XTH150M XTH175M XTH200M XTH225M XTH250M XTH275M

Range (mm) 2-2.5 2.5-3 3-4 4-5 5-6 6-8 8-10 10-12.5 12.5-16 16-20 20-25 25-35 35-50 50-65 65-80 80-100 100-125 125-150 150-175 175-200 200-225 225-250 250-275 275-300

Code No (inch) XTH1i XTH2i XTH3i XTH4i XTH5i XTH6i XTH8i XTH10i XTH12i XTH16i XTH20i XTH25i XTH35i XTH50i XTH65i XTH80i XTH100i XTH125i XTH150i XTH175i XTH200i XTH225i XTH250i XTH275i

Depth (mm) 9 9 12 18 18 58 58 58 62 62 66 66 80 80 80 85 100 100 100 100 100 103 103 103

(inch) 0.35 0.35 0.47 0.70 0.70 2.28 2.28 2.28 2.44 2.44 2.62 2.62 3.15 3.15 3.15 3.35 3.94 3.94 3.94 3.94 3.94 4.05 4.05 4.05

Display Unit XTPG01 ” ” ” ” XTPG02 ” ” ” ” XTPG03 ” ” ” ” ” XTPG04 ” ” ” ” ” ” ”

SETS: Supplied with digital display unit, heads, rings and UKAS Code No (mm) SXTH1M SXTH3M SXTH4M SXTH5M SXTH6M SXTH7M SXTH8M

Range (mm) 2-6 6-10 10-20 20-50 50-100 100-150 150-200

Code No (inch) SXTH1i SXTH3i SXTH4i SXTH5i SXTH6i SXTH7i SXTH8i

Range (inch) 0.080-0.250 1/4-3/8 3/8-3/4 3/4-2 2-4 4-6 6-8

Measuring Heads 5 2 3 3 3 2 2

Setting Rings 3 1 2 2 2 1 1

LARGE SETS: Supplied with digital pistol grip, heads, rings and UKAS Code No (mm) SXTH10M SXTH11M SXTH9M

Range (mm) 6-20 20-100 100-200

Code No (inch) SXTH10i SXTH11i SXTH9i

Range (inch) 1/4-3/4 3/4-4 4-8

Measuring Heads 5 6 4

DEPTH STOP Code No DSTOP01

Range (mm) 2-6

INDIVIDUAL PISTOL GRIPS Range (inch) 0.080-0.25

Code No (mm) XTPG01M XTPG02M XTPG03M XTPG04M

EXTENSIONS Code No EGX 0200 EGX 0400 EGX 0500 EGX 0001 EGX 0004

Length (mm) 63 76 100 150 150

Setting Rings 3 3 2

(inch) 2.5 3.0 4.0 6.0 6.0

To Fit Heads (mm) 6-10 10-12.5 12.5-20 20-50 50-300

(inch) 1/4-3/8 3/8-1/2 1/2-3/4 3/4-2 2-12

Range (mm) 2-6 6-20 20-100 100-300

Code No (inch) XTPG01i XTPG02i XTPG03i XTPG04i

Range (inch) 0.080-0.250 1/4-3/4 3/4-4 4-12

DATA TRANSMISSION Code No XTiP001 XTiP002 XTiP003

Description Serial Data Output Cable USB Data Output Cable Wireless Powered Opto Module

Tel: +44 (0)1274 223 456 Fax: +44 (0)1274 223 444

Partners in Precision

BORE GAUGING Bowers MicroGauge 2-Point Bore Gauge The new MicroGauge 2-point bore gauging system has been designed specifically for the measurement of small bores between 1.0-6.0mm. Featuring a completely new digital readout and extremely compact overall dimensions, the MicroGauge is truly a pocket-sized instrument. Digital readout and measuring head together are about the same size and format as a ballpoint pen which represents a big advantage for those needing to measure small precision parts and who need to have their gauge with them all the time. The clear LCD display is easily set using only two buttons and results are shown with switchable 0.01/0.001/0.0005mm resolution. Data transfer is via Proximity-RS232 or Proximity-USB output. The measuring heads are equipped with spherical hard-chromed contact points and are set in appropriate setting rings. Like all Bowers bore gauging products the MicroGauge system is available as individual instruments or as full sets. All setting rings are supplied as standard with UKAS certification.

Depth Stop

Features • System range: 1-6mm • New slimline digital display • Switchable resolution 0.01/0.001/0.0005mm • Simple 2-button operation • Clear LCD display • Data output: RS232 / USB proximity sensor • Linearity: Diameter 1.0-1.5 max 2% of measuring travel, min 0.001mm. Diameter 1.5-6 max 1% of measuring travel, min 0.001mm • Repeatability : 0.001mm • Available as individual instruments or sets • UKAS-certificates as standard with all setting rings • Hard-chromed ball-contacts • Depth-stops available • Stand available as an option

For more information visit www.bowersmetrology.com

BORE GAUGING Bowers MicroGauge 2-Point Bore Gauge TECHNICAL SPECIFICATION: Individual measuring heads, readouts and setting rings Measuring Head MG011W MG012W MG013W MG014W MG015W MG016W MG017W MG018W MG019W MG020W MG021W MG022W MG023W MG024W MG025W MG026W MG027W MG028W MG029W MG030W

Range (mm) 0.95-1.15 1.07-1.25 1.17-1.35 1.27-1.45 1.37-1.55 1.50-1.90 1.80-2.20 2.05-2.45 2.25-2.75 2.50-3.00 2.75-3.25 3.00-3.50 3.25-3.75 3.50-4.00 3.75-4.25 3.65-4.35 4.15-4.85 4.65-5.35 5.15-5.85 5.65-6.35

Range (Inch) 0.037-0.045 0.042-0.049 0.046-0.053 0.050-0.057 0.054-0.061 0.059-0.075 0.071-0.087 0.081-0.096 0.089-0.108 0.098-0.118 0.108-0.128 0.118-0.138 0.128-0.148 0.138-0.157 0.148-0.167 0.144-0.171 0.163-0.191 0.183-0.211 0.203-0.230 0.222-0.250

Min/Max Measuring Depth (mm) 0.6 / 11 0.6 / 11 0.6 / 11 0.6 / 11 0.6 / 11 0.9 / 17 0.9 / 17 0.9 / 17 1.2 / 22 1.2 / 22 1.2 / 22 1.2 / 22 1.2 / 22 1.2 / 22 1.2 / 22 2.0 / 40 2.0 / 40 2.0 / 40 2.0 / 40 2.0 / 40

Digital Readout MGU1 MGU1 MGU1 MGU1 MGU1 MGU2 MGU2 MGU2 MGU2 MGU2 MGU2 MGU2 MGU2 MGU2 MGU2 MGU2 MGU2 MGU2 MGU2 MGU2

Cone MGC1 MGC1 MGC1 MGC1 MGC1 MGC2 MGC2 MGC2 MGC3 MGC3 MGC3 MGC3 MGC3 MGC3 MGC3 MGC4 MGC4 MGC4 MGC4 MGC4

Setting Ring MGR100 MGR110 MGR120 MGR130 MGR140 MGR175 MGR200 MGR225 MGR250 MGR275 MGR300 MGR325 MGR350 MGR375 MGR400 MGR400 MGR450 MGR500 MGR550 MGR600

(mm) 1.00 1.10 1.20 1.30 1.40 1.75 2.00 2.25 2.50 2.75 3.00 3.25 3.50 3.75 4.00 4.00 4.50 5.00 5.50 6.00

SETS: including digital readout, measuring heads, depth stops and setting rings with UKAS certificate Code No SMG001M SMG002M SMG003M SMG004M

Range (mm) 0.95-1.55 1.50-2.45 2.25-4.25 3.65-6.35

LARGE SETS: including digital readout, measuring heads, depth stops and setting rings with UKAS certificate Code No SMG010M SMG011M SMG012M

Range (mm) 0.95-2.45 1.50-4.25 2.25-6.35

STANDARD DEPTH STOP Code No MGSTOP1 MGSTOP2 MGSTOP3 MGSTOP4

Range (mm) 0.95-1.55 1.50-2.45 2.25-4.25 3.65-6.35

DATA TRANSMISSION Code No OUTP005 OUTP006

Description Wireless Proximity Module Sylvac Proximity USB

Tel: +44 (0)1274 223 456 Fax: +44 (0)1274 223 444

MicroGauge with proximity cable

Partners in Precision

BORE GAUGING Digital Lever Bore Gauge The robust new Bowers XTL Lever range is perfect for vertical bore measurement, providing accurate and repeatable bore gauging under inspection department or shop-floor conditions. The XTL has a simple ergonomic action and can be fitted with a wide variety of analogue and digital indicators or even transducer probes. The range can be provided with IP65 rated digital indicators, rendering it resistant to coolant, water and airborne particles. A ‘wireless’ gauge module is also available, enabling cable free communication with remote data collectors, PCs etc. The cost-effective new XTL boasts hardwearing extended travel carbide measuring anvils and is able to measure diameters up to 100mm.

Features • Measuring range 6-100mm (diameters above 100mm on request) • Excellent for vertical bore measurement • Simple 2-button operation • Large easy-to-read swivel display (20-100 sizes only) • 2 preset memories • RS-232C output • Self-entering heads • Constant measuring pressure • Fast, accurate measurement • Resolution 0.001mm (0.00005") • Tungsten carbide measuring faces on all 3-point heads from 12.5mm • Blind bore measurement above 12.5mm (0.500") • Extensions available above 6mm for deep hole measurement • Setting rings included with individual instruments and sets • UKAS certificates supplied as standard with all setting rings • UKAS certificates supplied with all gauges • Serial number on all gauges and measuring heads • Heads with special anvils available to suit specific customer requirements (e.g. Threads, grooves, 2-point, spherical, splines etc) • Bore gauges manufactured according to DIN863, part4

INDIVIDUAL INSTRUMENTS: Supplied with head, ring and UKAS certificates Code No (mm) XTL6M XTL8M XTL10M XTL12M XTL16M XTL20M XTL25M XTL35M XTL50M XTL65M XTL80M

Range (mm) 6-8 8-10 10-12.5 12.5-16 16-20 20-25 25-35 35-50 50-65 65-80 80-100

Code No (inch) XTL6i XTL8i XTL10i XTL12i XTL16i XTL20i XTL25i XTL35i XTL50i XTL65i XTL80i

Range (inch) 1/4-5/16 5/16-3/8 3/8-1/2 1/2-5/8 5/8-3/4 3/4-1 1-1 3/8 1 3/8-2 2-2 5/8 2 5/8-3 1/4 3 1/4-4

Accuracy (mm) 0.004 0.004 0.004 0.004 0.004 0.004 0.004 0.004 0.005 0.005 0.005

(inch) 0.00015 0.00015 0.00015 0.00015 0.00015 0.00015 0.00015 0.00015 0.00020 0.00020 0.00020

Depth (mm) 58 58 58 62 62 66 66 80 80 80 85

(inch) 2.28 2.28 2.28 2.44 2.44 2.62 2.62 3.15 3.15 3.15 3.35

Setting Ring (mm) (Inch) 8.00 0.312 8.00 0.312 12.50 0.500 12.50 0.500 20.00 0.750 20.00 0.750 35.00 1.375 35.00 1.375 65.00 2.625 65.00 2.625 80.00 3.250

SETS: Supplied with heads, rings and UKAS certificates Code No (mm) SXTL3M SXTL4M SXTL5M SXTL6M

Range (mm) 6-10 10-20 20-50 50-100

Code No (inch) SXTL3i SXTL4i SXTL5i SXTL6i

Range (inch) 1/4-3/8 3/8-3/4 3/4-2 2-4

6-20MM LEVER GAUGE DATA TRANSMISSION

20-100MM LEVER GAUGE DATA TRANSMISSION

Code No XTiP001 XTiP002 XTiP003

Code No OUTP007 OUTP008 OUTP005

Description Serial Data Output Cable USB Data Output Cable Wireless Powered Opto Module

For more information visit www.bowersmetrology.com

Description Serial Data Output Cable USB Data Output Cable Wireless Proximity Module

BORE GAUGING XTHSY Pistol Grip Bore Gauge with Indicator The XTHSY Pistol Grip bore gauge is a useful option for those requiring pistol ergonomics with a large digital indicator. The LCD digital indicator fits into a standard 8mm clamping shaft at the rear of the pistol-grip. Pistols of this type are available for all measuring heads in the XT range.

Features Standard: DIN 863 - Part 4 • Measurement range from 6-100mm • Ergonomically designed pistol grip body • Functions include 2 pre-set memories, tolerance indicator lights and mm/inch conversion • RS-232 data output facility • Self centring measuring heads with tungsten carbide contact points • Setting rings provided with each instrument complete with traceable certification • Blind bore measurement on all instruments above 12.5mm

BOXED SETS Code No SXTHSY3M SXTHSY4M SXTHSY5M SXTHSY6M SXTHSY10M SXTHSY11M

Range 6-10mm 10-20mm 20-50mm 50-100mm 6-20mm 20-100mm

Maximum Bore Depth 58mm 62mm 66mm 82mm 58-62mm 66-82mm

Accuracy 0.004mm 0.004mm 0.004mm 0.005mm 0.004mm 0.005mm

Tel: +44 (0)1274 223 456 Fax: +44 (0)1274 223 444

Partners in Precision

BORE GAUGING Ultima Electronic Bore Gauge Bowers Ultima Bore Gauge offers a choice of resolutions up to 0.0001mm. Featuring the NEW Bowers ‘FASTFIT’ measuring heads with extended measuring range (above 14mm), the Ultima boasts a simple lever operation and a constant measuring force, ensuring outstanding ease of use and repeatability under laboratory or shop-floor conditions.

Features • UKAS certificates standard for all measuring heads and setting rings • Measuring range 2-310mm (0.080"-12.000") • Resolution: 0.0001mm (0.00001") • Constant spring pressure for improved repeatability • Good positive feel as heads self-centre in the bore

ULTIMA HOLDERS Code No (with probe) PH2 PH3 PH4 PH5

Code No (without probe) PW2 PW3 PW4 PW5

• Bowers Fastfit measuring heads for rapid changeover • Ceramic anvils on heads above 12mm • Blind-bore measurement standard above 12mm • Possible to connect several probe holders to one single readout to measure different bore sizes at one measuring station • The complete range of Bowers special heads is available for the Ultima (grooves, threads, splines, deep-bores etc) • Depth stops available for all heads • Available without digital readout unit (if not required) • Interchangeable probe option, to allow use of other manufacturers probes and displays

For more information visit www.bowersmetrology.com

Range (mm) 2-6 6-20 20-100 100-310

BORE GAUGING Ultima Electronic Bore Gauge ULTIMA SPECIFICATION Head Code No ULH6 ULH7 ULH8 ULH9 ULH10 ULH11 ULH12 ULH13 ULH14 ULH15 ULH16 ULH17 ULH18 ULH19 ULH20 ULH21 ULH22 ULH23 ULH24 ULH25 ULH26 ULH27 ULH28 ULH29 ULH30 ULH31 ULH32 ULH33 ULH34 ULH35 ULH36 ULH37 ULH38 ULH39 ULH40 ULH41 ULH42 ULH43 ULH44 ULH45 ULH46 ULH47 ULH48

Range (mm) 2.0-2.5 2.5-3.0 3.0-4.0 4.0-5.0 5.0-6.0 6-8 8-10 10-12 12-14 14-17 17-20 20-24 24-28 28-32 32-38 38-44 44-50 50-60 60-70 70-80 80-90 90-100 100-110 110-120 120-130 130-140 140-150 150-160 160-170 170-180 180-190 190-200 200-210 210-220 220-230 230-240 240-250 250-260 260-270 270-280 280-290 290-300 300-310

(inch) 0.078-0.098 0.098-0.118 0.118-0.157 0.157-0.197 0.197-0.236 0.236-0.315 0.315-0.393 0.393-0.472 0.472-0.550 0.550-0.670 0.670-0.787 0.787-0.945 0.945-1.100 1.100-1.260 1.260-1.500 1.500-1.730 1.730-1.970 1.970-2.360 2.360-2.756 2.756-3.150 3.150-3.543 3.543-3.940 3.940-4.330 4.330-4.725 4.725-5.120 5.120-5.510 5.510-5.900 5.900-6.300 6.300-6.690 6.690-7.090 7.090-7.480 7.480-7.875 7.875-8.270 8.270-8.661 8.661-9.055 9.055-9.449 9.449-9.842 9.842-10.236 10.236-10.630 10.630-11.024 11.024-11.417 11.417-11.811 11.811-12.200

Accuracy (mm) 0.0010 0.0010 0.0010 0.0010 0.0010 0.0010 0.0010 0.0010 0.0010 0.0010 0.0010 0.0010 0.0010 0.0010 0.0010 0.0010 0.0010 0.0015 0.0015 0.0015 0.0015 0.0015 0.0015 0.0015 0.0015 0.0015 0.0015 0.0015 0.0015 0.0015 0.0015 0.0015 0.0015 0.0020 0.0020 0.0020 0.0020 0.0020 0.0020 0.0020 0.0020 0.0020 0.0020

(inch) 0.00004 0.00004 0.00004 0.00004 0.00004 0.00004 0.00004 0.00004 0.00004 0.00004 0.00004 0.00004 0.00004 0.00004 0.00004 0.00004 0.00004 0.00006 0.00006 0.00006 0.00006 0.00006 0.00006 0.00006 0.00006 0.00006 0.00006 0.00006 0.00006 0.00006 0.00006 0.00006 0.00006 0.00008 0.00008 0.00008 0.00008 0.00008 0.00008 0.00008 0.00008 0.00008 0.00008

Repeatability (mm) (inch) 0.0010 0.00004 0.0010 0.00004 0.0010 0.00004 0.0010 0.00004 0.0010 0.00004 0.0010 0.00004 0.0010 0.00004 0.0010 0.00004 0.0010 0.00004 0.0010 0.00004 0.0010 0.00004 0.0010 0.00004 0.0010 0.00004 0.0010 0.00004 0.0010 0.00004 0.0010 0.00004 0.0010 0.00004 0.0015 0.00006 0.0015 0.00006 0.0015 0.00006 0.0015 0.00006 0.0015 0.00006 0.0015 0.00006 0.0015 0.00006 0.0015 0.00006 0.0015 0.00006 0.0015 0.00006 0.0015 0.00006 0.0015 0.00006 0.0015 0.00006 0.0015 0.00006 0.0015 0.00006 0.0015 0.00006 0.0020 0.00008 0.0020 0.00008 0.0020 0.00008 0.0020 0.00008 0.0020 0.00008 0.0020 0.00008 0.0020 0.00008 0.0020 0.00008 0.0020 0.00008 0.0020 0.00008

Measuring Depth (mm) (inch) 9 0.35 9 0.35 12 0.47 18 0.71 18 0.71 60 2.36 60 2.36 61 2.40 61 2.40 61 2.40 61 2.40 69 2.72 69 2.72 69 2.72 72 2.83 72 2.83 72 2.83 80 3.15 80 3.15 80 3.15 80 3.15 80 3.15 80 3.15 80 3.15 80 3.15 80 3.15 80 3.15 80 3.15 80 3.15 80 3.15 80 3.15 80 3.15 80 3.15 80 3.15 80 3.15 80 3.15 80 3.15 80 3.15 80 3.15 80 3.15 80 3.15 80 3.15 80 3.15

Tel: +44 (0)1274 223 456 Fax: +44 (0)1274 223 444

Code ULR2 ULR2 ULR4 ULR5 ULR5 ULR8 ULR8 ULR12 ULR12 ULR17 ULR17 ULR24 ULR24 ULR32 ULR32 ULR44 ULR44 ULR60 ULR60 ULR80 ULR80 ULR100 ULR100 ULR120 ULR120 ULR140 ULR140 ULR160 ULR160 ULR180 ULR180 ULR200 ULR200 ULR220 ULR220 ULR240 ULR240 ULR260 ULR260 ULR280 ULR280 ULR300 ULR300

Setting Ring (mm) (inch) 2.5 0.098 2.5 0.098 4 0.157 5 0.197 5 0.197 8 0.315 8 0.315 12 0.472 12 0.472 17 0.670 17 0.670 24 0.945 24 0.945 32 1.260 32 1.260 44 1.730 44 1.730 60 2.360 60 2.360 80 3.150 80 3.150 100 3.940 100 3.940 120 4.725 120 4.725 140 5.510 140 5.510 160 6.300 160 6.300 180 7.090 180 7.090 200 7.875 200 7.875 220 8.661 220 8.661 240 9.449 240 9.449 260 10.236 260 10.236 280 11.024 280 11.024 300 11.811 300 11.811

Holder Type PH2 PH2 PH2 PH2 PH2 PH3 PH3 PH3 PH3 PH3 PH3 PH4 PH4 PH4 PH4 PH4 PH4 PH4 PH4 PH4 PH4 PH4 PH5 PH5 PH5 PH5 PH5 PH5 PH5 PH5 PH5 PH5 PH5 PH5 PH5 PH5 PH5 PH5 PH5 PH5 PH5 PH5 PH5

Partners in Precision

BORE GAUGING Ultima Electronic Bore Gauge

ULTIMA STANDARD EXTENSIONS Code No UEXT0200 UEXT0300 UEXT0001 UEXT0002 UEXT0004

Length (mm) 63 75 100 150 150

To Fit Heads (mm) 6-10 10-12 12-20 20-50 50-310

ULTIMA SHORT EXTENSIONS Code No UXSH4 UXSH5

Length (mm) 50 50

To Fit Heads (mm) 20-50 50-310

ULTIMA SETS Code No (with Sylvac D5OS display) USET2 USET3 USET4 USET7 USET8 USET9 USET10

Code No (without Sylvac D5OS display) USET2W USET3W USET4W USET7W USET8W USET9W USET10W

Range (mm) 2-6 6-10 10-20 6-20 20-50 50-100 20-100

For more information visit www.bowersmetrology.com

BORE GAUGING XT500 Large Diameter 3-point Bore Gauge The Bowers XT500 large diameter 3-point bore-gauge has been designed specifically for the measurement of internal diameters between 300 and 500mm. The newly designed constant-force digital readout ensures that the measuring pressure remains constant throughout the measurement whilst radiussed measuring anvils provide optimum centralisation in the part. Anvil sets are supplied in 25mm steps (300-325, 325-350 etc) and each set has been manufactured to the exact toleranced size. The 300-325mm anvils are the master reference set and are used for setting the gauge in the setting ring. The other anvil sets are then fitted as required without further re-setting. This means that only one 300mm setting ring is required to set the gauge for all diameters in the full 300-500mm range of the instrument.

Features • Measuring range: 300-500mm • New constant-force digital readout • Single 300mm setting ring covers full range • Radiussed anvils of tool-steel for optimum centering • Accuracy: 15μm • Repeatability: 3μm • IP65 electronics • RS-232 output • Resolution 0.01/0.001mm. Metric/inch switchable • Fast accurate measurement • Extensions available for deeper bores • UKAS certificate with setting ring • Certificate of conformity with bore gauge • Supplied in fitted case

The Bowers XT500 with extension for deeper bores

INDIVIDUAL INSTRUMENTS: Supplied with digital display unit, measuring head with exchangeable anvils and setting ring with UKAS certificate Code No (mm) XT5001M XT5002M XT5003M XT5004M XT5005M XT5006M XT5007M XT5008M

Range (mm) 300-325 300-325, 325-350 300-325, 350-375 300-325, 375-400 300-325, 400-425 300-325, 425-450 300-325, 450-475 300-325, 475-500

Accuracy (mm) 15μm 15μm 15μm 15μm 15μm 15μm 15μm 15μm

Depth (mm) 120 120 120 120 120 120 120 120

Setting Ring (mm) 300 300 300 300 300 300 300 300

SETS: Supplied with digital display unit, measuring head with exchangeable anvils and setting ring with UKAS certificate Code No (mm) SXT3000M SXT4000M SXT5000M

Range (mm) 300-400 300-325, 400-500 300-500

DATA TRANSMISSION Code No XTiP001 XTiP002 XTiP003

Tel: +44 (0)1274 223 456 Fax: +44 (0)1274 223 444

Description Serial Data Output Cable USB Data Output Cable Wireless Powered Opto Module

Partners in Precision

BORE GAUGING Air Gauging Air Gauging is a fast, user friendly method of providing high precision results in even the most challenging of shop-floor environments. Using air flow volumes and pressures to measure parts, air gauging is a reliable, repeatable technology well-suited for applications such as precision medical tapers where tolerances are tight. Air gauging technology is flexible; enabling measurement of not only dimensions but geometric and relational characteristics, such as squareness and parallelism; ovality, taper, and straightness of bores; and distance between hole centres.

Bowers PC-2200 Air/Electronic Column The Bowers PC-2200 is a state of the art flexible electronic/air column capable of operating with air gauging products and measuring probes. The advanced new column contains a multitude of measuring functions including static and dynamic gauging, classification grading, probe mixing, (A+B), (A-B), etc.

Concentricity

Features • Metric/Imperial

• Approach limit setting

• 3 colour LED display

• Calibration, single or Max/Min

• Digital display

• Accuracy 0.5% full scale +/- resolution

• Status indicator

• 6 range settings

• 2 probe input

• Resolution 0.1um (5 settings)

• 4 probe input option

• Grading (1-100)

• Probe mixing, (A+B), (A-B), etc.

• RS-232 output

• Compatible with most electronics probes

• Can be linked to PLC or Logic controller

• Air convertor option (1 or 2)

• Dual supply voltage (220 / 110 volt)

Squareness

Runout

• Dynamic mode Max, Min, TIR, etc. • Tolerance limit setting Ovality

Flatness

Diameter

Parallelism

For more information visit www.bowersmetrology.com

BORE GAUGING Air Gauging Applications

Straightness

Concentricity of 2 Inside Diameters

Simultaneous Int/Ext Measurement

Parallelism of 2 Bores

Taper

Centre Distance of 2 Holes

PC-2200 ELECTRONIC COLUMN

ACCESSORIES

Code No 55-MCOL2 55-MAIND2 55-MAIND4 55-MALVD2 55-MALVD4 55-MACAP2 55-MACAP4

Code No 55-PC2302 55-PC2311 55-PC2312 55-PC2312 55-PC2312 55-PC2321 55-PC2341 55-PC2332 55-SOFTWARE

Description PC-2200 Column mm/inch A-IND2 analogue board (HBT)-2 channels A-IND4 analogue board (HBT)-4 channels A-IND2 analogue board (LVDT)-2 channels A-IND4 analogue board (LVDT)-4 channels A-CAP2 analogue board (Sylvac)-2 channels A-CAP4 analogue board (Sylvac)-4 channels

Description Power jump cable RS232 cable (9p/M/F) Output cable (9p/M-> no connector) External control cable DC-out cable (9p/M-> no connector) Foot pedal with cable for 1 col. Switch box (4 functions) CH-BUS cable for 2 col. Programming Software

PC-2200 AIR / ELECTRONIC COLUMN Code No 55-MCOL2 55-MC 55-MAIR1 55-MAIR2 55-PC2332 55-WKXT4248

Description PC-2200 Column mm/inch AIR Converter + regulator AIR1 1 channel analogue board AIR2 2 channels analogue board Cable, column to A/E converter Air Regulator / Filter

ALUMINIUM BASE PLATES Code No 55-MALP 1 55-MALP 2 55-MALP 3 55-MALP 4 55-MALP 5 55-MALP 6

Tel: +44 (0)1274 223 456 Fax: +44 (0)1274 223 444

Description For 1 Column For 1 Column & 1 Converter For 1 Column & 2 Converters For 2 Column & 2 Converters For 2 Column & 3 Converters For 2 Column & 4 Converters

Partners in Precision

BORE GAUGING Bowers Air Plugs and Rings Bowers offers the most comprehensive range of standard air plugs, rings, calipers, etc, currently available. To complement this service we also produce bespoke air gauging products to help solve customer’s specific measuring problems. Our hi-tech manufacturing plant incorporates a first class UKAS calibration laboratory, ensuring the quality and accuracy of our air gauging products.

Features • High resolution • 3mm to 150mm diameter • High repeatability • Non contact • Static or dynamic measurement • Multi parameter measurement • Compatible with instruments from other sources • Air plugs for internal measurement • Air rings and calipers for external measurement • In-cycle, in-process and post-process

Standard: 3-8mm

Standard: 8-63mm Thru Bore

Thru Bore

Blind Bore

Standard: 63-150mm

Thru Bore

Blind Bore

For more information visit www.bowersmetrology.com

BORE GAUGING Bowers Air Rings Air Rings-Standard & Offset

STD AIR RING

OFFSET AIR RING

AIR RINGS - SPECIFICATION Size Range (mm) 3.17-6.35 6.35-25.40 25.40-38.10 38.10-50.80 50.80-63.5

Size Range (inch) 1/8-1/4 1/4-1 1-1.5 1.5-2 2-2.5

Dia A (mm) 63.50 82.55 107.95 120.65 133.35

Dia A (inch) 2.5 3 1/4 4 1/4 4 3/4 5 1/4

Dia B (mm) 19.05 25.40 28.58 28.58 28.58

Dia B (inch) 3/4 1 1 1/8 1 1/8 1 1/8

Tel: +44 (0)1274 223 456 Fax: +44 (0)1274 223 444

Partners in Precision

BORE GAUGING Special Bore Measurement Although Bowers produces the most comprehensive series of bore gauges and internal measuring equipment available, not all applications can be covered by our standard instrument range. In line with our customer care ethos, Bowers has earned a reputation for manufacturing special heads for measuring non-standard applications. The following information illustrates some of the many difficult measuring problems easily solved by these special heads.

Threads Screw Threads To measure effective (functional) diameter, pitch diameter, major diameter, between M4 - 300mm. / No. 8 UN 12" diameter.

2 Point

Ball Screw Threads

3 Point

External Threads

From Ă&#x2DC; M10. External Thread

For more information visit www.bowersmetrology.com

BORE GAUGING Special Bore Measurement - Grooves • Interchangeable with standard heads 2 Point

• Suits Bowers XTD, XTH and Ultima • Special forms, radius, ball contacts • Depth stops available for quick location • Annular grooves possible

Grooves For sizes from 2-300mm diameter.

Side view

3 Point

Groove Head with Depth Stop

Brake Caliper Measurement

Ball Race Measurement

Caliper Groove Measurement

Measuring Component

Tel: +44 (0)1274 223 456 Fax: +44 (0)1274 223 444

Partners in Precision

BORE GAUGING Special Bore Measurement - Internal Spline 2 and 3 point heads available. Anvils manufactured from tool steel. Between pin, major and minor diameter heads available. Diameters from 8-300mm diameter (5/16"-12").

Pitch Diameter

Major Diameter

Minor Diameter

Special Measurement - External Spline Frames fitted with 1 x ball and 1 x pin.

Pitch Diameter

For more information visit www.bowersmetrology.com

Major Diameter

Minor Diameter

BORE GAUGING Special Bore Measurement - Spherical 2 Point Spherical Measurement of ovality in bore.

2 Point

Measurement of bores with irregularities.

3 Point Spherical Gives good repeatability even when out of line with bore centre. Available from 6-300mm diameter on digital systems.

3 Point

Spherical Radius Can be supplied as a 2 point (for ovality) or 3 point contact. Available from 6-300mm.

Front view

Tel: +44 (0)1274 223 456 Fax: +44 (0)1274 223 444

Side view

Partners in Precision

BORE GAUGING Special Bore Measurement - Deep Hole Pneumatic Operated by a pneumatic actuator powered by a 3 bar compressed air supply - either from a compressor or a workshop air-line. The measurement data is collected by a capacitive probe fitted just behind, and in constant contact with the measuring head. This direct contact ensures high-quality transducer-type accuracy, even at great depths. Measurements are taken by pressing a footswitch connected to the airline and the data is then passed automatically via cable back down the bore to the digital readout at the operator end.

Features • Measures diameters from 50-310mm, up to 15m deep

2 Point

• Spherical, Tungsten Carbide anvils • 2 point and 3 point heads available • Accuracy +/-0.005mm (subject to bore condition) • Quick set-up time • Easy to use • Not adversely effected by temperature fluctuation • Robust design • Various readouts available

3 Point

Deep Hole XT - Under 2 Metres Up to 2.0 metres deep with standard extensions.

2 Point

3 Point

For more information visit www.bowersmetrology.com

BORE GAUGING Special Bore Measurement - Miscellaneous Irregular Spacing

Gun Barrel Head

Available between 16-300mm diameter to measure between odd spaced lobes.

Measurement of smooth bore and rifled bore gun barrels. Major and minor diameters measured deep in to bores.

Right Angled Adaptor

Blind Bore Standard between 2-6mm and 12.5-300mm. Between 6-12.5mm on request.

Front view

Slot Width (Large)

Slot Width (Small)

Slot widths from 6-100mm.

Slot widths from 2-6mm.

Tel: +44 (0)1274 223 456 Fax: +44 (0)1274 223 444

Side view

Partners in Precision

BORE GAUGING SmartPlugs The robust, easy to use SmartPlug range is designed to give the operator greater speed of use, unmatched measuring accuracy and superb repeatability, especially in harsh shop-floor environments. Advanced hand held ergonomics allied to an ingenious mechanical / electronic system render SmartPlugs the easiest to operate Bowers bore gauging system to date. The flexible nature of Bowers SmartPlugs range means that they can be supplied fitted with easy to read electronic indicators (ideal for automatic data collection), conventional analogue indicators, or transducer probes linked to remote digital readout units.

Features

• Range 6-280mm

• Coverplates as standard on all SmartPlugs

• Tough, robust construction

• Specials (e.g. blind bore) on request

• Easy-to-use

• Repeatability )1μm

• Long life

• Setting by means of a setting ring

• High accuracy dedicated plug-gauges

• Quick and reliable measurement

• Flexible, modular

• 2-point measurement as standard

• Hand-held measurement

• Blind bore available on request

• Can be incorporated into automated measuring systems (in-series)

• Depth-stops available

• Cost-effective

• Guide chamfer for easy entry into bore

• Short delivery times

• High durability, long-life plugs and contacts

• High visibility display

• Easy to clean

• Protective indicator shroud (with some indicators)

• Plug body coatings: Hard-chrome (standard), T.i.N., Plain steel

• All setting rings supplied as standard with UKAS calibration certificates

• Measuring contacts: Tungsten carbide, (standard), hard-chrome, ruby, ceramic

• Extensions available for deeper bores

For more information visit www.bowersmetrology.com

BORE GAUGING SmartPlugs Indicators

Type A

Type C

Waterproof MIni Indicator with Shroud Preset value maximum 130mm

Type B Mechanical Dial Gauge

Standard Digital Indicator also available with shroud

P10 Transducer Probe

P2B Transducer probe

Holders

SMA001M M6 Holder

SMA005M M10 Holder

SMA007 SMA002M

M10 – 100mm Extension

SMA003

M6 Holder

M6 – 100mm Extension

M10 Holder

SMA028

SMA004

SMA008

M6 – M10 Adapter

M6 Probe Holder

M10 Probe Holder

SMPDS00-09 Depth Stop

SMA006M

SMPDS00-09 Depth Stop

SmartPlugs M6 THREAD RANGE 6 – 20mm Please state size to be measured

M10 THREAD RANGE 15 – 280mm Please state size to be measured

Contact Options: Tungsten Carbide (standard), Hard Chrome, Ruby, Ceramic Plug-Body options: Hard Chrome Plated (standard), Titanium Nitride, Plain Steel

Tel: +44 (0)1274 223 456 Fax: +44 (0)1274 223 444

Partners in Precision

BORE GAUGING SmartPlugs SmartPlug Applications & Options

SmartPlug with TiN coated body

SmartPlug with ruby contacts

SmartPlug with ceramic contacts

SmartPlug for blind bore measurement

SmartPlug with depth stop

SmartPlug with extension

SmartPlug with transducer holder and standalone display

SmartPlug for large diameters (up to 280mm)

For more information visit www.bowersmetrology.com

BORE GAUGING SmartPlugs SmartPlug Technical Detail

SMARTPLUGS Size (mm) Range h L1 6-7.8* 0.15 3 27 7.9-20 0.15 3 27 15-45 0.2 3.5 28 45.1-70 0.2 4 28 70.1-280 0.2 4 35 * max measuring depth 27mm between 6 and 7.8mm

L2 35 35 43.5 44 44

W 0.5 0.5 1 1.5 1.5

G M6x0.75 M6x0.75 M10x1 M10x1 M10x1

Tel: +44 (0)1274 223 456 Fax: +44 (0)1274 223 444

Partners in Precision

BORE GAUGING SmartPlugs SMARTPLUGS SmartPlug Standard SMP010 SMP012 SMP014 SMP016 SMP018 SMP020 SMP022 SMP024 SMP026 SMP028 SMP030 SMP032 SMP034 SMP036

Bore diameters >6-20mm / 0.236"-0.787" >15-25mm / 0.590"-0.984" >25-35mm / 0.984"-1.378" >35-45mm / 1.378"-1.772" >45-60mm / 1.772"-2.362" >60-80mm / 2.362"-3.150" >80-100mm / 3.150"-3.937" >100-125mm / 3.937"-4.921" >125-150mm / 4.921"-5.906" >150-175mm / 5.906"-6.890" >175-200mm / 6.890"-7.874" >200-225mm / 7.874"-8.858" >225-250mm / 8.858"-9.843" >250-280mm / 9.843"-11.025"

SmartPlug Blind-bore SMP010BB >6-20mm / 0.236"-0.787" SMP012BB >15-25mm / 0.590"-0.984" SMP014BB >25-35mm / 0.984"-1.378" SMP016BB >35-45mm / 1.378"-1.772" SMP018BB >45-60mm / 1.772"-2.362" SMP020BB >60-80mm / 2.362"-3.150" SMP022BB >80-100mm / 3.150"-3.937" SMP024BB >100-125mm / 3.937"-4.921" SMP026BB >125-150mm / 4.921"-5.906" Sizes above 150mm on request

Connecting thread M6x0.75 M10x1 M10x1 M10x1 M10x1 M10x1 M10x1 M10x1 M10x1 M10x1 M10x1 M10x1 M10x1 M10x1

M6x0.75 M10x1 M10x1 M10x1 M10x1 M10x1 M10x1 M10x1 M10x1

TiN coated body

Ceramic contacts

Ruby contacts

SMARTPLUGS ACCESSORIES Accessories – SMA001M SMA002M SMA003 SMA004 SMA009M SMA011M SMA013 SMA028

M6 thread M6 Holder short 8mm stem M6 Holder long 8mm stem M6 100mm extension M6 Probe holder 8mm stem *Type A Mini indicator with shroud & M6 short holder 8mm stem* *Type A Mini indicator with shroud & M6 long holder 8mm stem Type C Indicator with shroud & M6 holder 8mm stem M6-M10 Adapter (to use M10 holders with M6 plugs)

Accessories – M10 thread SMA005M M10 Holder short 8mm SMA006M M10 Holder long 8mm stem SMA007 M10 100mm extension SMA008 M10 Probe holder 8mm stem SMA015M *Type A Mini indicator with shroud & M10 short holder 8mm stem SMA017M *Type A Mini indicator with shroud & M10 long holder 8mm stem SMA019 Type C Indicator with shroud & M10 holder 8mm stem Indicating Units SMA021 *Type ‘A’ digital Mini indicator. Res. 0.001mm SMA022 Type ‘B’ mechanical dial-gauge. 0.001mm graduation SMA023 Type ‘C’ digital indicator. Res. 0.001mm P2B Transducer probe P2B D50S D50S digital readout 0.001 / 0.0001mm Res. D80S D80S digital readout unit 0.001 / 0.0001mm Res. D100S D100S digital readout unit 0.001 / 0.0001mm Res. * Type A Mini indicators preset values up to 130mm only.

For more information visit www.bowersmetrology.com

BORE GAUGING SmartPlug Setting Rings - Complete with UKAS Calibration Certificates SETTING RINGS. GRADE NOMINAL

SETTING RINGS. GRADE "X"

(+/- 0.005mm and marked to actual size) Code No SPR002N 1.5-2mm SPR003N 2-3mm SPR004N 3-4mm SPR005N 4-5mm SPR006N 5-6mm SPR010N 6-10mm SPR020N 10-20mm SPR025N 20-25mm SPR030N 25-30mm SPR040N 30-40mm SPR050N 40-50mm SPR060N 50-60mm SPR070N 60-70mm SPR080N 70-80mm SPR090N 80-90mm SPR100N 90-100mm SPR115N 100-115mm SPR130N 115-130mm SPR145N 130-145mm SPR160N 145-160mm SPR170N 160-170mm SPR180N 170-180mm SPR190N 180-190mm SPR200N 190-200mm SPR210N 200-210mm SPR220N 210-220mm SPR230N 220-230mm SPR240N 230-240mm SPR250N 240-250mm SPR260N 250-260mm SPR270N 260-270mm SPR280N 270-280mm

Code No SPR002X SPR003X SPR004X SPR005X SPR006X SPR010X SPR020X SPR025X SPR030X SPR040X SPR050X SPR060X SPR070X SPR080X SPR090X SPR100X SPR115X SPR130X SPR145X SPR160X SPR170X SPR180X SPR190X SPR200X SPR210X SPR220X SPR230X SPR240X SPR250X SPR260X SPR270X SPR280X

SETTING RINGS. GRADE "XX"

1.5-2mm 2-3mm 3-4mm 4-5mm 5-6mm 6-10mm 10-20mm 20-25mm 25-30mm 30-40mm 40-50mm 50-60mm 60-70mm 70-80mm 80-90mm 90-100mm 100-115mm 115-130mm 130-145mm 145-160mm 160-170mm 170-180mm 180-190mm 190-200mm 200-210mm 210-220mm 220-230mm 230-240mm 240-250mm 250-260mm 260-270mm 270-280mm

Code No SPR002XX SPR003XX SPR004XX SPR005XX SPR006XX SPR010XX SPR020XX SPR025XX SPR030XX SPR040XX SPR050XX SPR060XX SPR070XX SPR080XX SPR090XX SPR100XX SPR115XX SPR130XX SPR145XX SPR160XX SPR170XX SPR180XX SPR190XX SPR200XX SPR210XX SPR220XX SPR230XX SPR240XX SPR250XX SPR260XX SPR270XX SPR280XX

DEPTH STOPS Code No SMPDS00 SMPDS01 SMPDS02 SMPDS03 SMPDS04 SMPDS05 SMPDS06 SMPDS07 SMPDS08 SMPDS09 SMPDS10 SMPDS11 SMPDS12 SMPDS13 SMPDS14

Tel: +44 (0)1274 223 456 Fax: +44 (0)1274 223 444

Diameter Range below 6mm 6-8.5mm 8.5-13mm 13-17.5mm 17.5-25mm 25-32.5mm 32.5-40mm 40-47.5mm 47.5-55mm 55-62.5mm 62.5-70mm 70-77.5mm 77.5-85mm 85-92.5mm 92.5-100mm

Partners in Precision

BORE GAUGING Digital Cylinder Bore Gauge Bowers Cylinder Bore Gauges now include an easy-to-use digital variant, bringing the benefits of a clear digital display and data output to this dependable gauge. Speed and accuracy is further increased by the ability of the instrument’s advanced electronics to ‘freeze’ and display the diameter of the bore after ‘sweeping’.

Features • Measuring range 12.5-600mm (1/2-24") • Fast simple checking for bore size, ovality, taper, etc • 0.002mm / 0.0005", 0.01mm / 0.0001" Dial gauge options (on mechanical system) • 0.001mm / 0.00005", 0.01mm / 0.0005" switchable (on digital system) • Tungsten carbide contact points • Lightweight glass reinforced nylon gauge shroud for extra strength and protection • Thermally insulated for extra stability • RS-232 output (on digital system) • Inch/metric conversion (on digital system) • Displays actual bore diameter or comparative results (on digital system) • Bore gauges available up to 3m (10 feet) long for deep hole measurement

DIGITAL CYLINDER BORE GAUGE Series 600D 12.5-22mm (1/2-7/8") 700D 22-50mm (7/8-2") 750D 50-150mm (2-6") 800D 150-300mm (6-12") 820D 150-600mm (6-24")

Model CBGD010

Capacity 12.5-22mm or 1/2-7/8"

Resolution (Switchable) 0.001/0.01mm or 0.00005/0.0005"

Measuring Depth 150mm or 6"

Other measuring depths available as standard 75, 300mm or 3, 12"

CBGD020

22-50mm or 7/8-2"

0.001/0.01mm or 0.00005/0.0005"

150mm or 6"

75, 300, 450, 600, 760, 910mm or 3, 12, 18, 24, 30, 36"

CBGD030

50-150mm or 2-6"

0.001/0.01mm or 0.00005/0.0005"

250mm or 10"

75, 450, 600, 760, 910mm or 3, 18, 24, 30, 36"

CBGD040

150-300mm or 6-12"

0.001/0.01mm or 0.00005/0.0005"

380mm or 15"

600, 760, 910mm or 24, 30, 36"

CBGD050

150-600mm or 6-24"

0.001/0.01mm or 0.00005/0.0005"

380mm or 15"

600, 760, 910mm or 24, 30, 36"

For more information visit www.bowersmetrology.com

BORE GAUGING Mechanical Cylinder Bore Gauge Bowers Mechanical Cylinder Bore Gauges have been further improved giving even greater ease of use and reliability. The introduction of tungsten carbide contact points ensures superior wear resistance. Suitable for use in most environments, these gauges are particularly useful for detecting ovality, or taking measurements relatively deep inside bores.

MECHANICAL CYLINDER BORE GAUGE Series 600 12.5-22mm (1/2-7/8") 700 22-50mm (7/8-2") 700 50-150mm (2-6") 800 150-600mm (6-24")

Model TGB652M TGB655M TGB654i TGB653I TGB702M TGB717M TGB701i TGB703i TGB752M TGB765M TGB751i TGB753i TGB802M TGB812M TGB801i TGB803i TGB821M TG851M TGB820i TGB822i

Capacity 12.5-22mm 12.5-22mm 1/2-7/8" 1/2-7/8" 22-50mm 22-50mm 7/8-2" 7/8-2" 50-150mm 50-150mm 2-6" 2-6" 150-300mm 150-300mm 6-12" 6-12" 150-600mm 150-600mm 6-24" 6-24"

Resolution 0.01mm 0.002mm 0.0005" 0.0001" 0.01mm 0.002mm 0.0005" 0.0001" 0.01mm 0.002mm 0.0005" 0.0001" 0.01mm 0.002mm 0.0005" 0.0001" 0.01mm 0.002mm 0.0005" 0.0001"

Graduation 0 - 50 - 0 0 - 10 - 0 0 - 25 - 0 0 - 50 - 0 0 - 50 - 0 0 - 10 - 0 0 - 25 - 0 0 - 50 - 0 0 - 50 - 0 0 - 10 - 0 0 - 25 - 0 0 - 50 - 0 0 - 50 - 0 0 - 10 - 0 0 - 25 - 0 0 - 50 - 0 0 - 50 - 0 0 - 10 - 0 0 - 25 - 0 0 - 50 - 0

Measuring Depth 150mm 150mm 6" 6" 150mm 150mm 6" 6" 250mm 250mm 10" 10" 380mm 380mm 15" 15" 380mm 380mm 15" 15"

Tel: +44 (0)1274 223 456 Fax: +44 (0)1274 223 444

Other measuring depths available as standard 75, 300mm 75, 300mm 3, 12" 3, 12" 75, 300, 450, 600, 760, 910mm 75, 300, 450, 600, 760, 910mm 3, 12, 18, 24, 30, 36" 3, 12, 18, 24, 30, 36" 75, 450, 600, 760, 910mm 75, 450, 600, 760, 910mm 3, 18, 24, 30, 36" 3, 18, 24, 30, 36" 600, 760, 910mm 600, 760, 910mm 24, 30, 36" 24, 30, 36" 600, 760, 910mm 600, 760, 910mm 24, 30, 36" 24, 30, 36"

Partners in Precision

UNIVERSAL GAUGING Universal Gauge The Bowers Universal Gauge’s ingenious modular format enables it to be quickly configured to suit almost any measuring challenge. Whether measuring internally or externally, the Universal’s clever constant pressure device ensures accuracy and consistency of reading. The gauge’s findings are displayed on its built in clear digital readout. The unique modular construction of the Bowers Universal Gauge facilitates the fitting of a large variety of measuring contacts and adaptors, enabling countless measuring tasks to be completed with ease. Accessories for the measurement of threads, grooves, splines, gears, hole centres, and many others are available as standard, whilst special adaptations for more unusual applications can be quoted on request.

Features • Internal and external measurement • Large measuring range possible 0-3000mm (0-118") • Constant measuring force • Digital or mechanical readout display • Large range of accessories for standard measurement of threads, grooves, splines, diameters, lengths, shallow spigots and recess diameters etc • Special anvil designs available P.O.A

UNIVERSAL GAUGE FULL SET Code No TGUDEMO TGU1000 TGUA001 TGUA006 TGUA007 TGUA008 TGUA013 TGUA014 TGUA011 TGUA012 TGUA010 TGUA003 TGUA004 TGUA005 TGUA009

Description Universal Gauge Full Set Universal Gauge Indicator with Cowl 50mm Measuring Arms 75mm Measuring Arms 100m Measuring Arms 20mm Disc Anvils 12mm Disc Anvils Int/Ext Shoulder Anvils Semi Cylindrical Anvils Depth Stops Clamping Insert Flat Measuring Anvil Spherical Measuring Anvil Mounting Attachment

For more information visit www.bowersmetrology.com

UNIVERSAL GAUGING Universal Gauge Sets Universal Gauge (extension compatible version) standard features: • Range 30-250mm internal / 0-215mm external 15mm anvil travel • Constant measuring pressure • Digital or mechanical readout • 150mm and 500mm extensions available. Can be screwed together in multiples (up to maximum 3m recommended) • Measuring table and supports available for conversion to bench gauge for the measurement of small components

TGUDEMO2

• Covers approx 90% of all applications

SET CONTENTS - STANDARD VERSION Code No TGUDEMO2 TGU1000 TGUA001 TGUA003 TGUA005 TGUA006 TGUA010

Description Set with box Universal Gauge - supplied boxed Compatible with Extensions Digital indicator with cowl Clamping inserts (each) Spherical contacts (each) Measuring arms 50mm (pair) Depth-stops (pair)

Universal Gauge (slide guideway version) standard features: • Range 30-335mm internal / 0-300mm external 15mm anvil travel • Slide guideway for rapid measuring contact alignment • Constant measuring pressure

TGUGSET01

• Digital or mechanical readout • Measuring table and supports available for conversion to bench gauge for the measurement of small components • Covers approx 90% of all applications

SET CONTENTS - SLIDE GUIDEWAY VERSION Code No TGUGSET01 TGU1000G TGUA001 TGUA003 TGUA005 TGUA006 TGUA010

Description Slide Guideway version-Set Universal Gauge - supplied boxed Not Compatible with Extensions Digital indicator with cowl Clamping inserts (each) Spherical contacts (each) Measuring arms 50mm (pair) Depth-stops (pair)

Slide Guideway

Tel: +44 (0)1274 223 456 Fax: +44 (0)1274 223 444

Partners in Precision

UNIVERSAL GAUGING Universal Gauge and Accessories Standard Gauge

Slide guideway version

Code No TGU 1000 Measuring Range Internal:

Code No TGU 1000G Measuring Range Internal:

30-250mm (1.20-10.030")

30-335mm (1.20-13.20")

Measuring Range External:

0-215mm (0-8.50")

0-300mm (0-11.80")

EXTENSIONS (for standard gauge only) A 150mm

Code No TGUA033

500mm

TGUA032

Range Internal 30-400mm (1.2-15.00") 30-750mm (1.2-29.00")

Range External 0-365mm (0-14") 0-715mm (0-28.0")

Intermediate and additional lengths can be made up by using 150 or 500mm extensions

Digital Indicator and Protective Shroud

Measuring Arms (reversible for inside/outside diameters)

Code No TGUA 001

A 50 75 100

Code No TGUA 006 TGUA 007 TGUA 008

Ă&#x20AC;

Protective Shroud for Dial/Digital Indicator

Code No TGUA 002

Clamping Insert

Code No TGUA 003

Adjustable Depth Stops For Measuring Arms

Code No TGUA 010

Spherical Tips Code No TGUA 005

For more information visit www.bowersmetrology.com

Flat Tips Code No TGUA 004

UNIVERSAL GAUGING Universal Gauge Vee Support For Length Measurement Code No TGUA 022 15

Ø5

Mounting Attachments For Use With The Following Anvils Code No TGUA 009

Shoulder Anvils Flat Outside Spigot Diameter Code No TGUA 011

Ø5

5 10

Semi-Cylindrical Anvils For Inside Register Diameters Code No TGUA 012

Ø5

5 10

Cone Anvils For Measuring Hole Centre Distance

Ø5

Code No TGUA 019 TGUA 020 TGUA 021

Diameter ‘D’ 13 25 50

ØD

Tel: +44 (0)1274 223 456 Fax: +44 (0)1274 223 444

Hole centre distance

Partners in Precision

UNIVERSAL GAUGING Universal Gauge Although extremely comprehensive, the collection of Universal Gauge accessories cannot cover every measuring application. If your particular gauging need is not catered for within our standard range, specialised adaptors, contact points, etc can be quoted from a customer supplied component drawing.

CONTACTS FOR USE WITH MEASURING ARMS Flat for Outside Diameter/Length

Code No TGUA 004

Spherical for Inside Diameters

Code No TGUA 005

DISC Anvils for measuring Groove Diameter

Ø20

Ø5

Code No TGUA 014

2.5 2.0 Ø5

Ø12

Code No TGUA 013

For more information visit www.bowersmetrology.com

UNIVERSAL GAUGING Bowers Universal Gauge Specials Universal Gauge incorporating on-board indicator and extra reach contact points.

Extended Travel Special Application Universal Gauge.

Special Universal Gauge measuring across large diameter component with central boss.

Tel: +44 (0)1274 223 456 Fax: +44 (0)1274 223 444

Partners in Precision

UNIVERSAL GAUGING Checkmaster Comparator Available in two sizes, Checkmaster is the flexible gauging solution for short production runs. Simply setup your Universal Tooling set to suit your application (see opposite), fit your preferred indicator and zero against a master for fast accurate and incredibly repeatable results. Gauging force can be adjusted for softer materials and biased for either internal or external dimensions by a simple lever selection. This enables multi-dimension setups to be easily catered for.

Need absolute results? Using Bowers' standard digital indicator, the master size can be pre-set. Now the results are displayed as Absolute dimensions. Tolerances can be entered and an out of tolerance symbol will flash for even quicker reference.

Tooling: The Universal Tooling Set includes 2 x universal tooling blocks, combination blade / radius anvil, Mushroom anvils and mounting bars to allow a variety of internal and external features to be measured.

Checkmaster 1050

Features • Unique 3 gauge station and readout capability • Remarkable versatility and repeatability • Accepts most dial indicators, digital indicators (12.7mm travel) and Gauging Probes • Excellent gauge repeatability and reproducibility (G.R. & R.) capability • Exceptionally tough for shopfloor on-line inspection • Measuring force, with adjustable setting • Multi functional • Ideal for SPC and 100% inspection

Checkmaster 1060

• Left or right hand operation • Measuring range: Up to +/- 3mm depending on application

Checkmaster Dimensions Checkmasters can be supplied with or without indicators. If ordered ‘Less Indicator’ the Checkmaster will be supplied with a set of split bushes to suit any 8mm or 3⁄8" stem mount gauge with a suitable reach, set of Allen keys and a wooden storage box.

Checkmaster 1050 Code No: 1050

Checkmaster 1060 Code No: 1060

For more information visit www.bowersmetrology.com

UNIVERSAL GAUGING Checkmaster Comparator Need SPC, printed reports data storage? Replacing the conventional indicator with a transducer linked to our Sylvac D300S digital readout will allow you to setup and store multiple parts each with pre-toleranced dimensions. Just setup the correct tooling situation, select the part / job number required from the D300S memory and you are ready to go. SPC Data from previous measurements of the same part type can be viewed on the large colour screen and even printed direct from the D300S or transferred to a PC. Full maths functionality included: take dynamic measurements such as roundness / concentricity or solve more complex applications by using multiple transducers.

Checkmaster 1050 with Sylvac D300S Digital Readout

Universal Tooling Set

CHECKMASTER COMPARATOR Code No 1060-UTS

Description Universal Tooling Set for 1050 or 1060 Checkmaster

Tel: +44 (0)1274 223 456 Fax: +44 (0)1274 223 444

Partners in Precision

UNIVERSAL GAUGING Checkmaster Tooling Applications Features • Diameters, internal and external • Undercuts, 0 ring grooves, ball tracks internal and external • Gear and spline pitch diameter internal and external • Rolling gear test, gear to gear or gear to master • Gear pitch diameter to shaft bore run out • Holes centre to centre • Concentricity bore to O.D. • Step height, lengths, depths

Outside Diameter

Thread Features

Undercut Depth

Length

External Spline / Gear PCD

External Diameter

Rolling Gear Test

Internal Taper

Bearing Face Distance

Concentricity / Wall Thickness

Internal Spline (Large Diameter)

Hole / Slot Position

External Taper

Internal Spline (Small Diameter)

Slot Depth

Hole Centres

Web Thickness

Internal Recess Diameter

Recess Diameter

Bore Diameter

For more information visit www.bowersmetrology.com

UNIVERSAL GAUGING INTEX Comparator Beam Gauge Developed to measure both internal and external diameters and lengths, the Intex gauge’s aluminium extrusion beam gives it a rigid yet lightweight quality, making it ideal for shop-floor environments. The simple release of a locking thumbscrew enables the gauge’s measuring direction to be changed quickly and easily.

Features • Lightweight and rigid • Measuring ranges: 200-400mm, 400-600mm, 600-800mm, 800-1000mm • Sizes over 1000mm available on request • Internal and external measurement • 2mm travel on moving contacts • Adjustable fixed contacts with up to 250mm adjustment range • Digital or analogue indicator available • Hardened steel wear pads locate gauge onto component aiding repeatability and prolonging service life • Setting master required to set the instrument

INTEX shown with standard contacts fitted (available as extras) INTEXA01 - standard contacts

INTEX BEAM GAUGE - Without Indicator

INTEX BEAM GAUGE - With Indicator

Code No INTEX01 INTEX02 INTEX03 INTEX04

Measuring Range 200-400mm 400-600mm 600-800mm 800-1000mm

Code No INTEX01IND INTEX02IND INTEX03IND INTEX04IND

Code No INTEXA01

Description Standard contacts - 10mm diameter (pair).

Measuring Range 200-400mm 400-600mm 600-800mm 800-1000mm

Tel: +44 (0)1274 223 456 Fax: +44 (0)1274 223 444

Partners in Precision

UNIVERSAL GAUGING Carbon Fibre Comparator Beam Gauge Designed to measure both internal and external diameters and lengths, the high modulus carbon fibre beam is stiff, lightweight and has an extremely low co-efficient of thermal expansion (CTE). Suitable for measuring high accuracy diameters and lengths up to 4000mm+.

Features • Extremely lightweight even at 4m span • Extremely low co-efficient of thermal expansion • Measuring capacity of standard set: External: 0 > 1930mm Internal: 150 > 2150mm • Modular design of beam allows infinate level of adjustment within the above ranges • Additional 1000mm extensions add quickly and cost effectively to the gauge capacity • Internal and external measurement 0 > 105 (150)mm measurement depth from component face • 12mm anvil travel • Digital or mechanical readout • Tooling included for presetting gauge on Trimos horizontal machines

Set Contents • Pair gauge legs • Fixed leg tube • Moving leg tube • 250mm CF ext. tube • 500mm CF ext. tube • 1000mm CF ext. tube • Tooling to suit Trimos setting machine

CFBG01 - Carbon Fibre Beam Gauge Set

• Storage/travel case

For more information visit www.bowersmetrology.com

MICROMETERS Bowers Snapmic The revolutionary Bowers Snapmic shares the best attributes of a high quality digital micrometer and a flexible snap gauge. Its wide application range, adjustable support platen and ingenious snap action enable the rapid and accurate measuring of a wide range of parts. An adjustable support stand is available to aid the speed of batch part measurement. As well as its many standard uses the flexible nature of the Bowers Snapmic allows it to be configured to suit a multitude of specialised external measuring applications, the gauge can be supplied with special anvils to facilitate the trouble-free measurement of threads, splines, grooves, etc. The optional sturdy Snapmic stand permits the rapid accurate measurement of batch parts.

Features • Measuring range 0-30mm & 30-60mm • 2 preset memories • Preset recall • Zero set • Max / min / Tolerance / Hold function • Metric / inch conversion • Switchable resolution 0.01 / 0.001mm 0.0005 / 0.00005" • RS-232 output • Half duplex transmission • Bench stand available • 8mm diameter anvils • Special contact tips available for threads, gear tooth measurement, splines, grooves etc • Adjustable backstop

ACCESSORIES Code No EST0001

Description Stand for Bowers Snapmic

BOWERS SNAPMIC Code No (mm) EIM030M EIM060M

Range (mm) 0-30 30-60

Code No (inch) EIM030i EIM060i

Range (inch) 0-1.25 1.25-2.5

Resolution 0.001 / 0.00005" 0.001 / 0.00005"

Flatness 0.3μm / 0.000012" 0.6μm / 0.000024"

Parallelism 1.0μm / 0.00004" 2.0μm / 0.00008"

Tel: +44 (0)1274 223 456 Fax: +44 (0)1274 223 444

Accuracy 4μm / 0.00016" 5μm / 0.0002"

Repeatability +/1μm / 0.00005" 1μm / 0.00005"

Partners in Precision

MICROMETERS Bowers Universal "Snap" Gauge The Bowers SNAPMATIC snap gauge has been designed specifically for quick, reliable and accurate measurement of external cylindrical diameters. Particularly suitable for use in series production, the instrument is tough and solid enough to use on the machine in the workshop and flexible enough to be used in the measuring room for sample measurements (bench-stand available). The measuring surfaces are of top-quality tungsten carbide mounted on a no-maintenance spring-operated mechanism. Special anvils (e.g for grooves etc) can be fitted to the standard gauge by means of the mounting holes in the anvil.

Features • Measuring ranges: 0-25mm (0-1"), 25-50mm (1-2"), 50-75mm (2-3"), 75-100mm (3-4"), 100-125mm (4-5"), 125-150mm (5-6") • Gauging travel: 0.5mm • Constant measuring pressure • Adjustable depth-stop • 8mm diameter indicator locking bush as standard (3/8" on request) • Can be used with dial-gauges, digital indicators or measuring probes • 16mm wide tungsten carbide measuring surfaces for positive-feel measurement (see table for flatness and parallelism) • Measuring force: 13 N ± 3N • Indicator protection • Indicator can be swivelled through 360° • Bench stand available • Heat-resistant polymer grip • Mounting holes for fitting special contacts eg. grooves

Groove anvils

Spherical anvils

Indicator not included in price of gauge.

BOWERS 'SNAP' GAUGE Code No SPM25X SPM50X SPM75X SPM100X SPM125X SPM150X

Range 0-25mm 0-1" 25-50mm 1-2" 50-75mm 2-3" 75-100mm 3-4" 100-125mm 4-5" 125-150mm 5-6"

Flatness 0.3μm 0.000012" 0.3μm 0.000012" 0.3μm 0.000012" 0.3μm 0.000012" 0.3μm 0.000012" 0.3μm 0.000012"

Parallelism 2μm 0.00008" 2μm 0.00008" 3μm 0.00012" 3μm 0.00012" 4μm 0.00016" 4μm 0.00016"

For more information visit www.bowersmetrology.com

INDICATORS Rivet Height Gauge The Bowers Rivet Height Gauge has been specially designed to measure the height of rivets used on aircraft outer skin. If the top of the rivet is too high above or too low below the level of the rivet-hole, the streamlining of the aircraft will be affected. This wind-resistance will be magnified many times depending on the number of rivets present in the outer hull of the aircraft. The rivet-height gauge measures the height of the top of the rivet in relation to the level of the surrounding aircraft skin, enabling tolerances to be maintained and providing a valuable reference measurement to help determine the streamlining of the aircraft and the consequent effects on it’s aerodynamics and fuel efficiency.

Features • Rivet diameters : 3/16", 1/4", 5/16", 3/8" available as standard • Other rivet diameters available on request • Digital display with mm / inch conversion and preset function • Resolution : 0.0005" / 0.001mm • Repeatablility +/- 0.003μm VIEWING PORTS

• RS-232 data output • Scalloped base to facilitate visual location over the rivet CAVITY

• Very easy to use • Small portable format • Robust construction Different diameter and contact point options are available on request

CONTACT FACE WITH RIVET VARIOUS Ø

Digital Countersink Gauge The Bowers Countersink Gauge can be used to check the major diameters of countersinks in the aircraft outer skin, prior to the application of rivets. The gauge can also be used for countersink measurement in general applications within the aerospace, automotive and other related industries.

Features • Standard range diameter 6-16mm / 1/4-5/8" • Switchable resolution - inch/metric true conversion • Preset facility • Tolerance mode

• All digital indicator features can be locked for security

• RS-232 data output ANGLE

• Robust construction, hardened plunger, induction hardened body • Standard plungers available to measure 90º, 100º and 110º • Other angles available on request • Setting master supplied as standard Alternative size ranges can be manufactured to order.

GAUGE BODY DIA.

GAUGE CONE ANGLE 1º LARGER MEASUREMENT POSITION

Tel: +44 (0)1274 223 456 Fax: +44 (0)1274 223 444

Partners in Precision

CALIPERS UniCal - Universal Digital Caliper Designed to accurately perform a wide variety of measuring tasks, the new Bowers UniCal multi-purpose digital caliper range is available in 300mm, 600mm and 1000mm capacities, with larger versions available upon request. This revolutionary new technology boasts tough, lightweight reinforced beams, giving it incredible strength and weightlessness. Advanced features include a large easy to read digital display, preset facility, constant measuring force, metric inch conversion and RS-232 data output port.

*Accessories shown in picture not included in price.

Measuring contacts for face-groove and V-groove ø measurement

Features • Ranges: 0-300, 0-600, 0-1000 (larger versions available upon request) • Preset facility for internal / external measurement • Constant measuring force • Hold feature, freezes display for later viewing • Incremental floating zero

Shoulder anvils Code: TGUA 011

• Metric/Inch switchable • Resolution: 0.01mm / 0.0005" • MIN/MAX function • Tolerance indicators • 5mm Ø mounting bores on the top and underneath the gauge • Adapters available to fit Bowers Universal Gauge accessories (see pages 36-40) • Wide range of measuring contacts available

Semi-cylindrical anvils Code: TGUA 012

• Large easy to read LCD display, height of digits 8.5mm • RS-232 output • Water resistant

Disc anvils Code: TGUA 013

UNICAL Code No UNICAL300 UNICAL600 UNICAL1000

Range 300mm 600mm 1000mm

Max error 30μm 40μm 60μm

Repeatability 20μm 20μm 20μm

Cylindrical measuring pins

For more information visit www.bowersmetrology.com

CALIPERS Analogue Major Calipers The major versions of Bowers calipers include hard wearing carbide contact points as standard. As with other Bowers products, non-standard applications can be quoted against a component drawing.

Model TGIC External caliper allowing clearance over such obstructions as flanges, pipes etc. A = 55mm

Model TGEC

External caliper for use where access is limited.

A = 25mm B = 55mm

EXTERNAL CALIPERS Metric Model Code No TGIC063 TGEC063 TGIC064 TGEC064 TGIC103 TGEC103 TGIC104 TGEC104

Leg Length L 150mm 150mm 150mm 150mm 250mm 250mm 250mm 250mm

Resolution 0.02mm 0.1mm 0.1mm 0.1mm 0.02mm 0.02mm 0.1mm 0.1mm

Measuring Range A 0-50mm 0-50mm 0-50mm 0-50mm 0-50mm 0-50mm 0-50mm 0-50mm

Imperial Model Code No TGIC061 TGEC061 TGIC062 TGEC062 TGIC101 TGEC101 TGIC102 TGEC102

Leg Length L 6" 6" 6" 6" 10" 10" 10" 10"

Resolution 0.001" 0.001" 0.01" 0.01" 0.001" 0.001" 0.01" 0.01"

Measuring Range A 0-2" 0-2" 0-2" 0-2" 0-2" 0-2" 0-2" 0-2"

Digital Major Calipers Digital Major Calipers have a direct Inch/Metric indicator with switchable resolutions of 0.02mm / 0.001", 0.05mm / 0.0025", 0.1mm / 0.005" and 0.2mm / 0.010". They have zero and preset facility for both absolute and comparative measurement.

Features • High contrast digital display • Switchable resolution: 0.02 / 0.001", 0.05 / 0.0025", 0.1 / 0.005", 0.2 / 0.010" • Inch / Metric switchable • Zero and preset facility for absolute and comparative readings • Output for connection to printer or computer • Carbide measuring faces as standard • Hold function for ease of reading

• Min / max function

Model TGIC

Metric Model Code No TGIC060 TGEC060 TGIC100 TGEC100 TGIC200 TGEC200

Leg Length L 150mm/ 6" 150mm/ 6" 250mm/ 10" 250mm/ 10" 550mm/ 22" 550mm/ 22"

Resolution 0.02mm/ 0.001" 0.02mm/ 0.001" 0.02mm/ 0.001" 0.02mm/ 0.001" 0.1mm/ 0.005" 0.1mm/ 0.005"

A = 55mm

EXTERNAL SPECIFICATION Measuring Range A 0-50mm/ 0-2" 0-50mm/ 0-2" 0-50mm/ 0-2" 0-50mm/ 0-2" 0-50mm/ 0-2" 0-50mm/ 0-2"

Tel: +44 (0)1274 223 456 Fax: +44 (0)1274 223 444

Model TGEC B

A = 25mm B = 55mm

Partners in Precision

WIRELESS DATA TRANSMISSION Wireless Data Transmission Allowing the wireless transmission of measurement values from gauge to PC, the IBRit-rf1 Radio Module is the latest development in interface technologies. Communicating with up to 120 gauges, and with a maximum transmission distance of up to 200m, the wireless data transfer module connects via a port to your PC. The PC transmits address numbers to each gauge radio module where they are stored. The transmission of a measurement value is triggered simply by pressing the data key on the gauge module or on the gauge itself. An audible tone and visible light confirms a successful data transmission. Special data coding between the PC and the gauge radio module guarantees absolute data security.

Features • User-friendly

• Long transmitter battery life

• Individually programmable

• Full data security

• Long transmission distance

• Connects to all types of gauges

• Low cost

• CE & FCC approval

• Up to 120 transmitters per receiver

• Compact size

• Audible/visual transmission confirmation

• Allows integration into SPC software

IBRit - rf1 - usb The radio module IBRit - rf1 - usb serves as PC station for the wireless data transmission of measured values. The module is connected to an USB Port. The program IBR_SimKey is a simple PC software for the IBRit - rf1 series with following functions:

IBRit - rf1 - S233 IBRit - rf1 - SDial Radio module for gauges with Power RS-232 interface. Code No: S233 XTiP003 Code No: SDial 25-604-013A

1. Programming of the gauge radio modules. 2. Displaying of received values for testing.

IBRit - rf1 - tesa

3. Data transfer to all Windows programs.

Radio module for Tesa dial gauges of series Digico 2xx... 7xx.

Code No: 25-604-001

Code No: 25-604-014T

IBRit - rf1 - mit1

IBRit - rf1 - mahr

Radio module for gauges with Mitutoyo Digimatic interface. Plugable in calipers and dial gauges.

Radio module for gauges with MarConnect interface. Code No: 25-604-006

Code No: 25-604-011

IBRit - rf1 - digi

IBRit - rf1 - 232

Radio module for gauges with Mitutoyo Digimatic interface. Plugable in calipers and dial gauges.

The radio module IBRit - rf1 - 232 allows the connection of stationary gauges with RS-232 output and is universally programmable.

Code No: 25-604-007

Code No: 25-604-008

IBRit - rf1 - opto Radio module for gauges with Opto RS-232 interface. Code No: 25-604-014

Opto / 232 Adapter to connect IBRit - rf1 - opto radio modules to 9 pin. Sub-D connectors. Connection to Height gauges... Code No: 25-604-004

IBRit - rf1 - prox Radio module for gauges with Proximity interface. Code No: OUTP005

Special versions of radio modules Gauge radio modules with external antenna The Standard IBRit - rf1 radio modules are delivered with an integrated antenna. For max. transmission power, all radio modules can be delivered with an external antenna. Gauge radio modules with terminal strips The IBRit - rf1 radio modules can be delivered optional with terminal strips for the connection of external switches for data transmission.

For more information visit www.bowersmetrology.com

NOTES

Tel: +44 (0)1274 223 456 Fax: +44 (0)1274 223 444

Partners in Precision

NOTES

For more information visit www.bowersmetrology.com

Bowers Metrology Group Tel: +44 (0)1274 223 456 Fax: +44 (0)1274 223 444 e-mail: sales@bowersmetrology.com Website: www.bowersmetrology.com

Distributed By