Product Spotlight |
“AA” FLANGE, 1DG SERIES DOUBLE PUMPS “A” FLANGE, 2DG SERIES DOUBLE PUMPS “B” FLANGE 3DG SERIES DOUBLE PUMPS 2DG and 1DG double pumps available from Houston stock. 3DG series based on factory lead time. Honor Gear Pumps Corp. of Taiwan, with U.S. warehouse in Houston, is pleased to announce local availability of double pumps in “AA” flange and “A” flange. The “B” flange doubles are available subject to factory lead times. OEM inquiries through distribution are welcome. In addition to doubles, all single pumps are kept in stock in Houston, in the 4F17, “AA”, “A”, and “B” flange models. Aluminum body with cast iron flanges and rear covers are standard. Standard stock displacements in the 3GB series pump are 2.31, 2.68, 3.17, and 3.66 cu.in./rev. All other displacements are available subject to factory lead times. Honor Gear Pumps Corp. Proudly sold through distribution. Please call to be referred. Honor Pumps U.S.A. 1601 W. 25th St. • Houston, TX 77008 Toll free: 800-984-9727 • Local: 713-984-8144 Fax: 713-461-9631 • Email: service@honorpumps.com Web: www.honorpumps.com 214
ONPP-A sensor Gefran's ONPP-A sensor is designed for installation on pneumatic cylinders and integrated magnet’s position detection. It recognizes magnet orientation, it calibrates to eliminate any position reading offset. It’s optimized in thickness and length, strokes are up to 900 mm. It doesn’t require mounting brackets. The M8 connector provides a simple voltage output. Accuracy is in the order of 0.05 mm. Visit us at http://www.gefran.com
• • • • • •
Hand Adjustable Uniquely designed for 1M Life cycles Low Pressure Range from 3-135 PSI High Pressure Range from 5-6000 PSI Various Port Sizes Various Options to choose from
PVS sensors, Inc. www.pvs-sensors.com Phone: 1-800-988-1276 Fax: 864-638-0005
Excellent Quality At Excellent Prices
216
one-piece code U61 flange adapters
The patented Adaconn® Port Connector provides a compact means to join two flanges or flange ports, when used with AdaflangeTM and AdaflangeportTM Socket Head Flange Adapters. Flange ports of the same or different sizes (or even different SAE codes) may be joined together. Prior to assembly the one piece 4-bolt flanges are kept as captive assemblies that are free to rotate 360 degrees about the longitudinal centerlines to facilitate proper alignment.
215
Snap Action Micro Switch
ADACONN® PORT CONNECTORS
Adaconn® Blue Bell, Pennsylvania www. adaconn.com 215.643.1900
Special Advertising Section
The patented Adaconn® one-piece code U61 flange adapters have widths less than standard code 61 flanges, and allow manifold and component designs to be smaller, with higher power densities on a given mounting surface. Reducing and jump sizes are available. Larger diameter flow porting is possible than for comparably spaced SAE straight thread adapters. These adapters provide an excellent means to retain flange type modular components, and are available in flange sizes from 1/8 to 2 inch with JIC male flare ends. Adaconn® Blue Bell, PA 19422 • www. adaconn.com • 215.643.1900 218
217
september/october 2013
33