16082_58-85:56-79
18/8/10
15:59
Page 58
SELF PRIMING CONTRACTOR PUMPS BARE SHAFT UNITS
B
COMPLETE WITH PULLEY MODEL
PORT
H1 AS72 11/2" H2 AS61 2" H3 AS59 3" H4 1486 4" 3" H5 1752# H5H ASB3# 3" 4" H6 ASB5#
PULLEY
KG
HxWxL
100 x 2A 100 x 2A 100 x 2A 100 x 2A 100 x 2A 100 x 2A 100 x 2A
14.1 300 x 180 x 235 16.1 300 x 185 x 275 18.3 300 x 185 x 295 60 405 x 315 x 485 51 400 x 280 x 450 57 409 x 285 x 580 71 450 x 365 x 610
LM/HM @2900rpm
kW
CODE
300/16 480/18 900/16 1650/12 1650/25 1300/47 2550/28
0.75 1.5 2.2 4 7.5 9.2 15
070-140 070-142 070-144 070-146 070-148 070-ASB3 070-ASB5
PRICE
Self priming pump complete with pulley. Suitable for pumping clean or slightly dirty water. Not suitable for pumping abrasives. A non-return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again. Maximum suction depth of 6 metres and a maximum liquid temperature of 60°C. Pump casing, inlet flange and impeller are made from cast iron. Stainless steel shaft. Carbon mechanical seal. High pressure versions, trash duty versions and bronze versions are available. For solids handling see the HG1-6 on page 44 H5H – clean water only. # Available upon request. 20
H1AS72 AT3,600RPM
8
40 H6 AS85 AT 3,000RPM
30
H4 1486 AT 3,400RPM
20
H5H at 2900rpm
40
Delivery Head (m)
H2AS61 AT3,600RPM 12
Delivery Head (m)
Delivery Head (m)
16
60
H5 1752 AT 3,600RPM
50
H3AS59 AT3,600RPM
20
10 4
0 0 0
0 0
200
400
600
800
1000
400
800
1200
1200
1600 2000
2400
400
2800
600
800
1000
1200
1400
Delivery Volume (l/Min)
Delivery Volume (l/min)
Delivery Volume (L/Min)
B
P.T.O. POWERED MODEL
PORT
RATIO
KG
HxWxL
LM/HM
kW
CODE
2" 3" 4"
1:7,8 1:7,8 1:6,9
20 22 64
388 x 218 x 395 388 x 218 x 428 490 x 315 x 597
650/34@4000rpm 1200/30@4000rpm 2000/18@3600rpm
4 5.8 7.7
070-134 070-136 070-138
PTO AM23 PTO AM24 PTO AM60
PRICE
Self priming pump with gearbox for connecting to tractors by a universal joint. Suitable for pumping clean or slightly dirty water. Not suitable for pumping abrasives. A non-return valve is fitted on the inlet of the pump body to avoid the loss of water after the pump has stopped, making it easier to prime when the pump starts again. Maximum suction depth of 6 metres and a maximum liquid temperature of 60°C. Pump casing, inlet flange and impeller are made from cast iron. Stainless steel shaft. Carbon mechanical seal. High pressure versions, trash duty versions and bronze versions are available upon request.
3,600 RPM 3,400 RPM
21 18 15 12 9 6 3 0
3,200 RPM
3,400 RPM 15 3,200 RPM 10 3,000 RPM 2,800 RPM
2,800 RPM 300
400
500
Delivery Volume (l/min)
58
20
5
200
600
0 2,600 RPM
20
3,600 RPM
3,000 RPM
100
1490 - 4"
AM24 - 3"
25
200
400
600
800
1000
Delivery Volume (L/MIn)
1200
2,600 RPM
Delivery Head (M)
AM23 - 2"
30 27 24
Delivery Head (M)
Delivery Head (m)
Also available with hydraulic motor.
18 16
3,400 RPM
14 12 10 8
3,200 RPM 3,000 RPM
6 4 2 0
2,800 RPM 2,600 RPM 400
800
1200
1600 2000
Delivery Volume (L/MIn)
2400