Useful Accessories For
Harley-Davidson Motorcycles
Harley-Davidson Motor Company Milwaukee, Wis.
Harley-Davidson Archives
Harley-Davidson Archives
Useful Accessories For
HARLEY-DAVIDSON MOTORCYCLES
Terms. Prices herein are net and subject to change without notice. All prices F. O. B. Milwaukee. Customers should enclose cash with each order, or we will forward shipments C. O. D. when accompanied by sufficient deposit to guarantee transportation both ways. Remit in full by P. O. or Express Money Orders, or Stamps, (we accept Stamps for orders amounting to less than one dollar.) With remittance always include enough to cover postage on mailable orders. No doubt your credit is good but the above terms are made to eliminate the time and trouble required in keeping open accounts, and therefore, no exceptions can be made. Following the above rules will assure you prompt attention and quick service.
Harley-Davidson Motor Co. Milwaukee, Wis.
Harley-Davidson Archives
Harley-Davidson Archives
Accessories No. 1
Harley-Davidson Motor Co. Lamps.
All our lamps as shown are drawn in one piece from heavy gauge metal, all parts being securely riveted. Extra heavy catch and hinge are used insuring rigidness. Heavy cast props soldered and riveted. All mirrors are genuine ground mangin fastened with removable lugs, making replacement a matter of only a few moments.
We will furnish these lamps in two finishes, all nickel or black enamel with nickel hood and trimmings. All enameled lamps are finished in three coats, thoroughly baked on and guaranteed not to chip or peel off.
Old Reliable.
X-Ray.
Front Diameter 8*4, inches Body Diameter 6}^ inches Between Props 7^ inches Extreme length 6^3 inches Size of Mirror 6J^ inches Price, $6.50
8 inches Front Diameter 5K inches Body Diameter Q% inches Between Props 6 inches Extreme Length 5% inches Size of Mirror Price, $5 00
Midget Tail Light. Body and bracket of cast aluminum highly finished and polished. Detachable red and white glasses. A d j u s t a b l e bracket and improved gas pet cock. Price, $1.50
Pilot. Front Diameter 6 Yz inches Body Diameter 6J^ inches Between Props 7}^ inches Extreme Length 5% inches Size of Mirror 6^2 inches Price, $6.50
Standard motorcycle bracket especially designed to fit any motorcycle handle bar and to accommodate any standard lamp on the market. Price per pair, $1.00
Harley-Davidson Archives
Pressed Steel Prest-O-Lite Tank Bands. We have designed this band so that the Prest-O-Lite tank can be attached to the 1914 luggage-carrier without interfering with the use of the carrier. These bands are not a make-shift but a fine mechanical job, made entirely of pressed steel with the exception of the wing nut which is a drop forging. One of the cleverest features of the band is the inside clip which is made to fit on the curve of the luggage-carrier, thereby preventing the tank from slipping down. Another feature of this clip are the small feet which prevent the tank from shifting side-ways when the band is tightened up securely. We have made a filler to be used in connection with the pressed steel carriers so as to prevent them from being dented when the screws are drawn up too tight. The tank can be very quickly removed by loosening the thumb nuts. The bands are finished in white nickel, making a first class job. Price per pair, complete, $1.30
Tank Supporting Bracket. We have designed this bracket so that riders who prefer to place the Prest-O-Lite tank on handle-bars will have a rigid support for the tank. The bracket is held in place by the triple clamp screws. As longer screws are required we furnish two with each bracket. In ordering be sure and specify the model for which bracket is required.
Price, $1.00
Tee Connection. A small connection to join tubing so that gas can be supplied to both head and tail light. Price, .10
Annealed Copper Tubing. We find that the best results are obtained with the 3-16" annealed copper tubing which is large enough to carry the amount of gas necessary to light the lamps and at the same time is neat and compact. This tubing is soft and pliable but exceptionally strong and will stand a good deal of wear and tear. Price per foot, . 10
Rubber Tubing. After experimenting for some time with various grades of rubber tubing we finally decided on the tubing which we are now supplying to our trade. This tubing is exceptionally heavy and of A No. 1 quality. Price per foot, . 14
Harley-Davidson Archives
Harley-Davidson Motor Co.
Accessories No. 2
Pedal Crank Straightener. The Harley-Davidson pedal crank straightener is made of 1-inch 14-gauge steel tubing, 12 inches long, brazed on to crucible steel casting cast to pattern. It is enameled gray to match the color of machine and equipped with clips for fastening to frame. Price complete, $1.00
No. 20 Tire Pump. Telescoping frame pump of seamless brass tubing, highly nickeled, furnished with two clips. Rubber tubing is placed inside of cylinder when not in use. Length 18 inches. Price with clips, $1.00
Veeder Motorcycle Trip Cyclometer. -
The motorcycle cyclometer mechanism is much stronger than the regular bicycle cylometer and is designed to withstand the harder usage due to the higher speed at which motorcycles travel. The bracket which is regularly supplied with the motorcycle trip cyclometer is adjiistable by a simple arrangement which can be made to fit all makes of motorcycles. Price complete with striker,. $3.00 Extra strikers, each 40 Extra brackets, each 35
Harley-Davidson Archives
Stewart Speedometer. Front Wheel Drive Model 101 The new front drive "Stewart" solid tube speedometer is guaranteed by the makers to overcome all the disadvantages of the old style front drive flexible shaft speedometer. The speedometer is of admirable proportion, highly finished, and contains a very compactly constructed instrument窶廃ermitting the use of extra strong and durable parts that assure long life and permanent accuracy. The case is nickel-plated, making a very neat appearing instrument. The handsome 2J^-inch dial is black, making the speedometer and odometer figures stand out strong. The cover is of heavy French glass. The speedometer will indicate speed up to 75 miles an hour. The odometer employs a plain, hard bronze gear train, positively driven, each wheel positively locked into its proper position窶馬o possibility of the dials slipping窶馬o failure to register the correct mileage窶馬o lubricant required. A big, sturdy, costly mechanism that will run 100,000 miles and still be serviceable. The Season Odometer registers 10,000 miles and repeats. The Trip register will record up to 100 miles, and can be rapidly reset at any time to any tenth of a mile. This is a very desirable feature in following road maps. All Stewart speedometers are made upon the magnetic principle. There is only one moving part. It is the most simple mechanism in the world. There is practically no wear whatsoever to the Stewart Magnetic Type Speedometer. A new handle bar clamp bracket allows the speedometer to be held in almost any position the rider desires. The whole equipment is very simple to install and full instructions accompany every outfit. Every motorcyclist can equip his machine with the Stewart Front-Wheel Drive Speedometer without the least trouble. Price complete, $12.00
Rear Wheel Drive Model 101-A For those who prefer we also carry the rear wheel drive Stewart Speedometer, embodying all the features of the front drive Speedometer, with the exception of the shaft which is of flexible type. A special designed split sprocket has been made for use on the Harley-Davidson, which is large enough so that it can be placed over the rear brake drum without any trouble. Price complete, $12.00
Harley-Davidson Archives
Harley-Davidson Motor Co.
Accessories No. 3
Tandem Attachment. The Harley-Davidson tandem attachment is constructed especially for use on Harley-Davidson motorcycles. In lines and finish, it conforms to the general lines of the motorcycle. The shocks and jars are entirely absorbed by the cushion springs placed inside of the forks of the attachment. The springs are about 4 inches long and made of 9-gauge steel spring wire. Being enclosed, these springs are kept from dirt and grit and all danger of soiling the rider's clothes is entirely eliminated. The tandem itself is very substantially constructed, the forks being made of 1 - inch, 14-gauge seamless tubing, the footrest of y<i' x 1" channel iron, and the seat bar is a drop forging. When ordering, be sure and specify the model for which tandem is required as parts are not interchangeable. Price complete with handle-bars and saddle
..$17.00
Spring Cushion. These cushions are made of scientific leather, padded with hair and fitted with the best cushion springs made, making a very comfortable and durable seat. They are fastened to the luggage carrier by means of two special clips clamping the cushion to the carrier at four points, which holds it rigidly in place. Finished in plain black. Price, each, $3.00
Folding Foot Rests. A neatly designed compact folding foot rest, made to fit the rear stays of our machine, with double clamps. The double clamp prevents any twisting or turning on the frame. Finished in bright nickel. Price per pair, $1.50
Harley-Davidson Archives
c BO537
AMI3
AMZ CMIO
BO54O
AM 9
a BO678
BO-48S
AM25
i
at. CME6
AMI9
TB20
BO674
AMIO
O BO276
BO4O5
AMI6
BNIO9
AN3
CM27
AMIS
BNIIO
Ijjc
(]—-
AMI-4
CNII2
B0689
AM4
ANI6
BOI3O
BOI3I
BO66O
AN 2
Harley-Davidson Archives
Tandem and Luggage Carrier Parts. Price Each AM 13—Seat Bar only *AM 5—Handle Bar complete BO 537—Handle Bar Bolt. BO 405—Handle Bar Bolt Lock Washer BO 674—Handle Bar Bolt Nut. CM 10—Mud Guard Clamp, wide (For 1914 all but 10-A) AM 10—Mud Guard Clamp,(For all but 1914 models) AM 2—Seat Bar Bushing BO 540—Mud Guard Clamp Bolt BO 405—Mud Guard Clamp Bolt Lock Washer BO 674—Mud Guard Clamp Bolt Nut AM 9—Saddle Stud BO 276—Saddle Stud Washer BO 678—Saddle Stud Nut BO 485—Seat Bar Cotter Pin *AM 21—Tandem Fork Side only AM 25—Tandem Plunger (All but two-speed) CM 26—Right Tandem Plunger (Two-speed) CM 27—Left Tandem Plunger (Two-speed) AM 19—Plunger Spring for tandem AM 16—Plunger Head AM 15—Plunger Guide Nut AM 14—Rear Axle Extension for Thor Brake CN 112—Rear Axle Extension for 10-B and 10-E TB 20—Rear Axle Extension Nut for CN112 BN 109—Extension Stud for two-speed BN 110—Extension for two-speed BO 689—Extension Nut for two-speed AM 4—Tandem Handle Bar Grip *AN 14—Luggage Carrier Rack *AN 1—Rear Supporting Frame AN 3—Right Radius Bar *AN 4—Left Radius Bar AN 16—Right Radius Bar Clamp *AN 17—Left Radius Bar Clamp BO 131—Radius Bar Clamp Bolt BO 130—Radius Bar Bolt BO 660—Radius Bar Bolt and Clamp Bolt Nut AN 2—Front Supporting Frame *AM 14a—Set of Rear Axle Extensions for Thor Brake *CN112a—Set of Rear Axle Extensions for 10-B and 10-E *CNl09a—Set of Extensions for two-speed * Not shown.
$2.25 3.45 10 01 05 28 26 08 10 01 05 10 01 06 02 3.50 50 70 70 08 10 15 20 .20 10 10 20 05 38 2.00 60 40 40 15 15 04 03 04 30 40 .60 .70
Harley-Davidson Archives
Universal Luggage Carrier. This carrier is the most substantial of its kind on the market. The frame is made up of 1/ie"xl%6" cold rolled steel. The curve braces are J^"x24" cold rolled steel. Axle bar by which carrier is fastened to extensions is made of flat J^" cold rolled stock. Cross brace bars %2"x3^" cold rolled steel and top and lower bars of 3^"x%" cold rolled steel. The front of carrier TS clamped on to rear mud guards by means of clamp brackets, the same as used on our tandem attachment. The carrier is enameled Harley-Davidson gray to match color of machine, while the clamps are nickel-plated. The bags are made of ten-ounce water-proof duck, reinforced with leather wherever they come in contact with the metal. The straps, made of good leather, are securely riveted and fitted with easy acting buckles. The size of bags are 16" deep, 5" wide and 13" long. Distance across the top 9J-ÂŁ". In ordering, be sure and specify for what model carrier is required, as fittings are not interchangeable. Price, complete as shown. $10.00 Price, Frame only 6.00 Price, Set of Bags 5.00
Standard Luggage Carrier. The standard luggage carrier is substantially constructed and capable of supporting a weight of at least 250 pounds, the main supports extending from carrier to extension nuts on rear axle are made of %e"xl^" cold rolled steel. The curve side braces of short supports and top bars are made of Hs"x%" cold rolled steel. The carrier is enameled HarleyDavidson gray to match color of machine. May be used on all models previous to 1914. Price, $3.00
Harley-Davidson Archives
Harley-Davidson Motor Co.
Accessories No. 4
Foot Boards, Foot Levers, Band Brake together with Fittings. Price, complete as shown $22.00 For description see other side.
Harley-Davidson Archives
We are offering the foot board and band brake attachments so that riders of our 1912 and 1913 motorcycles can equip them with this improvement.
Foot Boards. These foot boards are constructed the same as those used on our 1914 models, except that they are fitted with adjustable clamps so that they can be attached to models of previous years. The foot clutch lever is connected with the hand operating clutch lever by means of a small clamp so designed that it fits over the head of the quadrant friction bolt, while the foot brake lever is connected with the brake by means of an adjustable rod which acts independent of the pedals. With a set of these foot boards the rider has complete control over his motorcycle as the clutch and the band brake can be operated without removing the feet from the foot boards. The clutch control is located on the left foot board while the brake control is located on the right foot board.
Band Brake. The band brake is fitted over the Thor coaster brake but works independent of it. It is the same type as used on our 1914 10-A belt drive model, having an external contracting band operating on a brake drum 7j/ÂŁ inches in diameter with a J'g-inch face. Made of heavy pressed steel, brake band faced with the very best brake lining obtainable. By referring to the illustration one can see how simple the adjustments are on this brake. With this brake the rider is able to control his motorcycle at all times and in crowded traffic can bring it to an abrupt stop by simply pressing his foot on the brake lever. This is a great improvement over the ordinary coaster brake.
Full directions sent with each attachment.
Harley-Davidson Archives
Harley-Davidson Motor Co.
Accessories No. 5
Sweater Coats Our sweater coats are made of high-grade worsted, are hand shaped to give a perfect fit, and have the new type of roll collar which is of great service for different temperatures. The illustration shows the collar fastened on the middle of the three buttons on the collar. When the mercury gets down around the zero mark the collar can be fastened securely higher up around the neck, protecting the throat. An ideal garment for early morning wear to ward off the chilly air, On the left breast is the Mark of Quality in a style similar to that used on the sweaters of baseball players in the big leagues. The low price of $5.00 is possible only because of the large quantity we handle. When ordering state size desired. Carried in sizes from 38 to 46. Price, $5.00
Jerseys
Harley-Davidson Jersey Open or V-Neck Sizes, from 32 to 46
Harley-Davidson Jersey Turtle Neck Sizes from 32 to 46
$2.00
$1.75
Harley-Davidson Archives
Exhaust Horn The Aermore exhaust horn has all the advantage of a clear and yet sharp signal without any of the disadvantages which go with the necessity of cutting the exhaust pipe in two or obstructing the exhaust pipe with a valve interfering somewhat with the free passage of exhaust gases. When the horn is not being used the exhaust pipe is absolutely free and the discharge gases from the cylinder pass unimpeded from the exhaust valve to the muffler. The damper is then against the opening in the horn, shutting it completely off from the exhaust. When the rider wants to give a warning signal with the horn the operation is extremely simple. A short pull on the control and the damper is turned over into the exhaust pipe, switching the exhaust gases from the exhaust pipe into the horn. The Aermore exhaust horn is correct in design and construction and is guaranteed by the manufacturer to give complete satisfaction. The horn will not clog or get out of order. It has few moving parts and no upkeep expense. The first cost is the only cost. On 1914 Harley-Davidsons the horn is attached with a forty-five degree elbow which carries the horn forward away from the cylinder so as not to interfere with the operation of the foot brake lever adjacent to the right foot board. At an instant's notice the rider can give a signal with the Aermore exhaust horn that is at all times musical and which can be made to sound for a considerable distance when necessary. The amount of warning sound is always under the control of the rider. In the city it can be modulated for short distances and in the country can be given loud enough to be heard several hundred yards. And the signal is always musical and pleasing. Price complete, $5.50 No. 30 Motorcycle Horn. High polished spun bell bulb horn. Full nickel plated, giving it a very neat appearance. Has a low, deep tone which clears the way. Price, each, $2.50
Harley-Davidson Archives
Accessories No. 6
Harley-Davidson Motor Co. "
Leggings. We recommend our leggings in quality and workmanship and guarantee them to be exactly as represented. We carry a large stock of the three styles on hand and are in a position to furnish all sizes from 14^ to 18. STYLE No. 130— Made of heavy black cape leather, top and side edges bound. Inside of instep reinforced, first quality leather bottom straps used. Provided with special improved fork side springs. Price, per pair, $2 . 50 STYLE No. 135 — The same quality and workmanship as No. 130, except that it is longer having an extension which covers the knee protecting the clothes when kneeling. Price per pair, $3 . 50 STYLE No. 160—Same quality and workmanship as No. 130 with three adjustable buckles used for fastening above knee. Price per pair, $4.00
Harley-Davidson Archives
No. 8550
Motorcycle Gauntlets. Our gauntlets are all table cut which make them better fitting, better finished and better wearing gloves than the ordinary block cut. We recommend to the rider the following styles of motorcycle gauntlets that have been especially designed and selected for spring, summer or early fall wear. No. 8550—Domestic Cape Motorcycle Gauntlet, seamless palm. Leather lined cuff, reinforced thumb. A dressy glove for the particular rider. Black only. Price, per pair, $1.75 No. 8551—Same style as No. 8550 except that it has a special chrome tanned selected brown horsehide palm, to withstand the severest wear. A glove that will always remain soft and pliable. Black only with brown palm. Price, per pair, $1.75 No. 8552—Same style and finish as No. 8551 with a grey horsehide palm. Black only with grey palm,
Price, per pair, $1.75.
Harley-Davidson Archives
Harley-Davidson Motor Co.
Accessories No. 7
Fly Wheel Truing Device. With this device a dealer is able to do a workmanship like job in lining up fly wheels. It is made especially for this work although it can be used for truing up various other articles. It is constructed along the lines of a lathe, having a head and tail stock which are stationary, the tail stock being adjustable to allow for the variations in the different fly wheels. The same care and attention was taken in making this device as is taken in making a high priced lathe. Small but substantially built, easy to operate. Will last a lifetime. An asset to every first class repair shop. Full directions sent with each device. Shipping weight, boxed, 100 pounds. Price, complete, $12.00 net.
The Bigsby Automatic Grease Gun. This well made gun makes it possible to oil wearing parts not readily accessible, thereby reducing the repair bills to a minimum. Any machine may be oiled without special effort or waste of lubricants. Easy to operateâ&#x20AC;&#x201D; simply pull the trigger and the gun fills the grease cup or axle as required. A special nozzle to fit the rear axle of the Harley-Davidson two-speed is furnished with this gun. Price, $3.00
Harley-Davidson Archives
CK802
AK429
AK432
AK434
CK804
AK430 CR80I
CK803
AK43S
AK8I5
t CK6
CKIO
AK59
Harley-Davidson Archives
Special Shop Tools. No. Price CK 802—Double end wrench, will fit all nuts measuring &" and Jf" across 24 CK 434—Double end wrench, will fit all nuts measuring fg" and 3s" across CK 806—Double end wrench, will fit all nuts measuring 3s" across
26
an(
l J" 34
CK 803—Double end wrench, will fit all nuts measuring •&" and fl" across
44
CK 435—Double end wrench, will fit all nuts measuring f" and across
44
f"
AK 429—Socket wrench for piston pin set screw
50
AK 430—Socket wrench for connecting rod bolt and nut
61
AK 431—Socket wrench for seat bar bolt and nut
65
AK 432—Socket wrench for engine clamp bolt and nut
72
CK 801—Socket wrench, will fit all hexagon nuts measuring %" across.
. 79
AK 433—Socket wrench for front axle nut and Troxel saddle nut
89 Price Net
AK 215—Left ball cup wrench for shop use
57
CK
40
CK
35—Crank case stud nut wrench for shop use 6—Special two-speed wrench for shop use
86
CK
10—Special inlet housing wrench for shop use
75
AK
59—Combination crank nut and sprocket nut wrench for shop use..
. 21
*BK 747—Spoke nipple wrench
40
*BK 745—Spanner wrench for sprocket lock nut and drive pawl shell
34
*BK 746—Spanner wrench for sprocket bearing lock nut
34
*Not shown.
Harley-Davidson Archives
Wrenches.
CK 800—An adjustable shop wrench fitting both AG13 driving hub nut and AG14 lock nut $1.30 net
CK 17—Shop wrench for AG1.5 driving disc lock nut
60 net
CK 79—Shop wrench for CG3.52 10-B and 10-E right ball cups
60 net
*
CK 411—Shop wrench for AE718 sprocket bearing nut
65 net
Expansion Reamers. 39-64" Expansion reamer for pistons and piston pin bushings 15-16" Expansion reamer for fly wheel shaft bushings
Price Net $2.28 3.48
Harley-Davidson Archives
Harley-Davidson Motor Co.
Accessories No. 8
Harley-Davidson Gray Air Drying Enamel.
LEY-DAVlD
This enamel is used for enameling or touching up scratches or bruises on frames, tanks, mudguards, etc. It is exactly of same quality and body as that being used on our machines. Although we advertise it as air drying enamel it can also be used effectively where the baking process is preferred. MPt. Can, $ .25 Y^ft. Can, .40 1 Pt. Can, . 70 1 Qt. Can, 1.25 1 Gal. Can, 4.50
Harley-Davidson White Transparent Copal. A high grade copal or white varnish for protecting and finishing re-enameled parts. This is exactly the same grade of copal we use in putting that high grade finish on new machines. M Pt. Can, $ .30 J^ Pt. Can, .45 1 Pt. Can, .80 1 Qt. Can, 1.50 1 Gal. Can, 4.90
ÂŤLlf . DAI ''kite Transparent
Striping Brushes for Enameling Parts. No. 4 Sword Striper. The proper brush to use for the fine red and gold finishing lines on tanks. Fine line edging, etc. Price, $ . 25 '
Two and one-half inch quill for J^-inch gray line striping on tool box. Price Metal tube brush for 54-inch heavy line stripe on mud guards and tanks. Price.. One and one-half inch sable flowing brush for enameling and varnishing. Price. . . .
Harley-Davidson Chain Lubricant.
EY-D. LUBRICAr*
Lubrication for driving chains is essential. There is only one efficient way of lubricating a chain and that is to place the chain in lubricant after lubricant has been reduced to liquid form. See directions on can. i^lb. Can, $ .25 1 Ib. Can, .40 2 Ib. Can, .65
Harley-Davidson Non-Fluid Lubricant. Of the proper consistency and extra fine quality for lubricating ball races in "Free Wheel Control", two-speed, step starter, coaster brake parts, upper and lower head cones, front hub cones, countershafts, pedals, and both recoil and main springs.
" A R L E Y - DAVIDS "' SON-FU1I) LUBRICANT
1 Ib. Can, $ .35
Harley-Davidson Archives
Harley-Davidson Gear Compound.
ttlEY-DAVIDSOl
This compound is a special grease best adapted for lubricating magneto drive gears under all conditions of heat, speed, and weather, Prevents wear and overcomes friction to a greater degree than any lubricant offered for that purpose. (Not used for Model 9-E or any 1914 model.)
GEAR COMPOUND
1 Ib. Can, $ .45
Harley-Davidson Shellac-Cement. A high grade shellac cement for coating engine pulley surfaces to hold fast the endless leather lagging. It can also be used for cementing rubber grips on handle bars and sealing various joints that are required to be air or oil tight.
ftEY-DAVIPSO| S MELLAC CEMENT
1
A Pt. Can, $ .30 1 Ft. Can, .45 1 Qt. Can, .70
Harley-Davidson Belt Dressing.
'BARLEY- DAVII . BELT DRE
This dressing is especially compounded according to our own formula and is recommendable for use on all motorcycle belts. It is made of a high quality medium light bodied oil and does not gum the belt like most inferior dressings or oil substitutes. If applied as per directions on can it will make the belt soft and pliable. Y2 Pt. Can, $ .25 45 1 Pt. Can,
Harley-Davidson Grinding Compound. A ready mixed compound for grinding valves. This compound contains no emery and is being used with best of results at our own factory. There is no danger of cutting the valve or seat when this compound is used.
Ur DA vi D COMPOOSl
J^lb. Can, $ .50 1 Ib. Can, 1.00
Harley-Davidson Archives
Harley-Davidson Motor Co.
Accessories No. 9
Harley-Davidson Motorcycle Oil This oil is absolutely the cleanest and most efficient motorcycle oil to be had. It is compounded according to our own specifications, determined only after years of exhaustive experiments and tests. It is refined from the choicest crude oil obtainable. In addition to having a high fire test, it contains no perceptible amount of free carbon due to the fact that it is filtered several times through fuller's earth which entirely eliminates all foreign elements. Practially all motor trouble is directly traceable to the use of either insufficient oil, or use of oil of inferior quality. Many unscruplous dealers sell these inferior grades for low prices but at a greater profit, claiming for them a high fire test, or that their oil is just as good, etc., but these oils are usually mechanically colored and are never clean or free from carbon. In addition to the regular oil that we have been furnishing in the past, we are now supplying a heavier oil for warm weather. 1 Gal. Can $1.00 5 Gal. Can 4 00 10 Gallons (2-5 Gal. Cans), 7.50 Yi Bbl per gal. .65 1 " ... " .60
WE SELL
HARLEY-DAVIDSON Touristsâ&#x20AC;&#x201D;Look for This Sign
Harley-Davidson Archives
, Harley-Davidson Archives
Harley-Davidson Archives
Harley-Davidson Archives