57_57 4/19/12 1:48 PM Page 57
Low Flow injecting up to 10% solution.
FEATURES: n n n n n
BENEFITS:
Water-powered Chemical resistant Accurate and reliable Quick-change maintenance parts 314 Connections
Flow Rate Item # Min. Max. MiniDos – 1% 0.03 GPM 12 GPM 112600 0,11 LPM 45 LPM MiniDos – 2.5% 0.03 GPM 12 GPM 112602 0,11 LPM 45 LPM MiniDos – 5% 0.03 GPM 12 GPM 112604 0,11 LPM 45 LPM
n n n n
No electricity Wide range of chemicals Economical Easy to use and maintain
Feed Ratio Min. Max. 0.2% 1.0% 1:500 1:100 0.5% 2.5% 1:200 1:40 1.0% 5.0% 1:100 1:20
Also models: A20Medium Flow up to 10% solution, A30-Medium Flow with on/off switch, A40-Medium/High Flow, T-100 High Flow. Call USCO for details.
Operating I/O Pipe Pressure Connection Price 3 6 - 100 PSI ⁄4" NPT $383.68 0,41 - 6,9 BAR 3⁄4" BSP 383.68 3 6 - 100 PSI ⁄4" NPT 813.15 0,41 - 6,9 BAR 3⁄4" BSP 813.15 3 6 - 100 PSI ⁄4" NPT 1,305.83 0,41 - 6,9 BAR 3⁄4" BSP 1,305.83
Dosmatic is a worldwide manufacturer of water-driven proportional injectors for the animal health, horticulture, and industrial markets. Dosmatic‘s NEW PROFESSIONAL LINE of non electrical, water driven, proportional injectors fulfill all your most stringent requirements with:
PATENTED DESIGN n n n n n n n
Built in mixing chamber – improved mixing Greatly enhanced overall chemical compatibility Reduced pressure loss Positive By-Pass Optional Remote Injection Accurate & consistent, proportional injection Cost effective installation, operation and maintenance
3-Year Warranty
Pumps
Dosmatic® Water-Driven Chemical Injector
FLEXFLO® Variable Speed Pumps FLEXFLO® C-1100V Variable Speed DIAPHRAGM
FLEXFLO® A-100NV Variable Speed PERISTALTIC Dosing
Injector Pump for Industrial Water Treatment Applications
Pump for Industrial Water Treatment Applications
emier Blue White’sic pr p pu peristalt clumsive ex s re featu gn! pump tube desi
From Only 66 $
658
Quick Spec C-1100V
Quick Spec
n Accepts 4-20mA, 0-10VDC and pulse input signals n Flow rates to 360 GPD, pressure to 150 PSI n Accuracy: ± 1% repeatability full range n Low pulsation – smooth gearmotor operation n Variable speed and stroke length adjustment
n Flow Output Verification Alarm System (Requires Micro-Flow Sensor sold separately) n Alarm output- relay (1 amp) n Ceramic double ball check valves n PVDF valves with Aflas ball seats n Recommended Service Warning System n Easy to read LCD display and controls n Corrosion resistant enclosure
Max Output at 0 PSIG Maximum Electronic Percentage Control Mechanical Control GPD GPH LPH oz/min PSI Item # Price Item # Price 360.0 15.0 56.8 32.0 25 C11V5(*)3X000V00 $919.45 C11F5(*)3X000V00 $665.28 260.8 10.8 41.1 23.1 100 C11V5(*)4X000V00 919.45 C11F5(*)4X000V00 665.28 155.9 6.4 24.6 13.8 150 C11V4(*)1X000V00 919.45 C11F4(*)1X000V00 665.28 119.7 4.9 18.9 10.6 150 C11V4(*)4X000V00 919.45 C11F4(*)4X000V00 665.28 57.7 2.4 9.1 5.1 150 C11V3(*)4X000V00 919.45 C11F3(*)4X000V00 658.66 Replace (*) with 4=115V/60Hz, 5=220V/50Hz, 6=230V/60Hz (Voltage does not effect pricing). All models ship with 1 extra set of motor brushes. Typical brush life is 2000 hours.
A-100NV
n Accepts 4-20mA, 0-10VDC and pulse input signals n Flow rates to 95 GPD, pressure to 100 PSI n Accuracy: ± 1% repeatability full range n No pulsation - continuous stream injection n Tube Failure Detection (TFD) Alarm System
n Alarm output- relay (1 amp) n Flow Output Verification Alarm System (Requires Micro-Flow Sensor sold separately) n Peristaltic Operation - No Valves to Clog n Recommended Service Waming System n Easy to read LCD display and controls n Corrosion resistant enclosure
Max Output at any Pressure Inlet/Outlet Maximum Digital Percentage Control Standard Percentage Control GPD oz/min ml/min TubingO.D. PSI Item # Price Item # Price 3 2.3 0.20 6 ⁄8" OD x 1⁄4" ID 100 A1N0(*)V-4T $813.86 A1N0(*)F-4T $555.04 3 4.9 0.44 13 ⁄8" OD x 1⁄4" ID 100 A1N1(*)V-4T 804.20 A1N1(*)F-4T 545.37 3 8.0 0.71 21 ⁄8" OD x 1⁄4" ID 100 A1N2(*)V-4T 804.20 A1N2(*)F-4T 545.37 3 9.5 0.85 25 ⁄8" OD x 1⁄4" ID 75 A1N3(*)V-4T 804.20 A1N3(*)F-4T 545.37 3 6.0 1.42 42 ⁄8" OD x 1⁄4" ID 100 A1N1(*)V-6T 804.20 A1N1(*)F-6T 545.37 3 24.0 2.13 63 ⁄8" OD x 1⁄4" ID 100 A1N2(*)V-6T 804.20 A1N2(*)F-6T 545.37 3 30.1 2.67 79 ⁄8" OD x 1⁄4" ID 75 A1N3(*)V-6T 804.20 A1N3(*)F-6T 545.37 3 52.5 4.66 138 ⁄8" OD x 1⁄4" ID 50 A1N1(*)V-7T 804.20 A1N1(*)F-7T 545.37 1 3 95.1 8.45 250 ⁄8" OD x ⁄4" ID 50 A1N3(*)V-7T 804.20 A1N3(*)F-7T 545.37 Replace (*) with 0=115V/60Hz, 1=220V/50Hz, 2=230V/60Hz (Voltage does not effect pricing) All models ship with 1 extra set of motor brushes.
CONVERSION TABLE To Convert LIQUID GALLONS LITERS OUNCES MILLILITERS MILLILITERS/MIN FEET OF WATER GALLONS GALLONS GALLONS
To
Formula
LITERS GALLONS MILLILITERS OUNCES GAL. PER HOUR PSI POUNDS CUBIC FEET CUBIC INCHES
GALLONS x 3.78533 = LITERS LITERS x .2642 = GALLONS OUNCES x 29.57= MILLILITERS MILLILITERS x .0338 = OUNCES ML/MN x .0158 Feet of Water (Head) x .43352 = PSI GALLONS x 8.337 = POUNDS GALLONS x .1337 = CUBIC FEET GALLONS x 231 = CUBIC INCHES
To Convert GALLONS/DAY GALLONS CUBIC METERS MISCELLANEOUS PSI KGS/SQ. CM. INCHES MILLIMETERS BARS PSI
To MILLILITERS/MIN CUBIC METERS GALLONS
Formula GALLONS/DAY x 2.628 = MILLILITERS/MIN Gallons x .0037854 = Cubic meters Cubic Meters x 264.173 = Gallons
KGS/SQ. CM. PSI MILLIMETERS INCHES PSI BARS
PSI x .070307 = KGS/SQ. CM KGS/SQ. CM. x 14.223 = PSI INCHES x 25.4 = MILLIMETERS MILLIMETERS x .03937 = INCHES BARS x 14.5 = PSI PSI x .068947 = BARS
*PLEASE NOTE: Although USCO has obtained this information from reliable sources, the company cannot assume any responsibility for its accuracy. Please verify this information before using.
Order Toll Free (800) 343-7555
57 24-HOUR FAX LINE (800) 232-8726