2/15/11
12:07 PM
Page 17
515 Rotor-X Flow Sensor
Quick Spec
Creating a flow monitoring or controlling system is simple with the Signet 515 Rotor-X Flow Sensor. Combine the 515 with a matched sensor installation fitting, and a Signet flow meter or controller, and have an operational flow monitoring system in minutes.
n Flow Rate Range: 1 to 20 ft/s n Linearity: ± 1% of full range n Repeatability: ±0.5% of full range
n PP 180 psi @ 68°F, 25 psi @ 185°F n PVDF 200 psi @ 68°F, 25 psi @ 185°F
515 Rotor-X Polypropylene Flow Sensor
515 FLOW SENSOR The 515 Flow Sensor is available in Polypro and PVDF for chemical resistance and high purity applications.
515 PVDF
COMPATIBILITY 5090, 8150, 5500 Flow Monitors, 5600 Batch Controller, 8550 Flow Transmitter, 8900 Multi-Parameter Controller
Item # P51530P0 P51530P1 P51530P2 515 PVDF Flow Sensor P51530V0 P51530V1 P51530T0 P51530T1
Housing Material Polypropylene Polypropylene Polypropylene
Shaft Material Titanium Titanium Titanium
Pipe Size(in.) 0.5 to 4 5 to 8 10-up
Price $255.14 239.24 252.31
PVDF PVDF PVDF PVDF
Hastelloy C Hastelloy C PVDF PVDF
0.5 to 4 5 to 8 0.5 TO 4 5 TO 8
400.16 428.26 382.85 416.77
Flowmeters and Process Controls
17:17
*FM APPROVED For Hazardous Areas Signet 515 Flow Sensor is FM approved for Class I, II, and III, Division 1, Groups A-G
Item # 32536P0 32536P1 32536P2 32536T0 32536V0 32536V1
2536 Low Flow Sensor
Quick Spec
The Signet 2536 Low Flow Sensor is a high resolution, low power device ideal for measuring flow in piping systems with extremely low velocities. It incorporates a state-of-the-art, advanced Hall Effect design allowing it to operate with a wide range of voltages and current supplies.
Operating Range: n 0.3 to 20fps n PP sensor housing: 180 psi @ 68°F, 25 psi 185°F n PVDF sensor housing: 200 psi @ 68°F, 25 psi @ 185°F Power Requirements: 3.3 to 24VDC, < 1.5mA @ 3.3V to 6VDC, <20mA @ 6V to 24VDC
Description PP body, Titanium shaft, 0.5" to 4.0" PP body, Titanium shaft, 5.0" to 8.0" PP body, Titanium shaft, 10.0" & up PVDF body, PVDF shaft, 0.5" to 4.0" PVDF body, Hastelloy C shaft, 0.5" to 4.0" PVDF body, Hastelloy C shaft, 5.0" to 8.0"
Price $243.70 257.54 270.70 433.39 414.70 452.77
COMPATIBILITY 8550 Flow Transmitter, 8900 Multi-Parameter Controller
2540 High Performance Flow Sensor
Quick Spec n Rugged 316 stainless steel or brass construction n Flow rates as low as 0.3 ft/s
Pipe Size Range: 0.5 to 24 in. Repeatability: ±0.5% of full scale Linearity: 1% of full range Materials: Refer to ordering info. for material options available. n O-rings: Viton® n Cable type: twisted pair, foil shield with drain wire. Cable length: 25 ft. (1,000 ft. max.) Quality Standards: CE
n No magnets in process fluid n Removal without shutdown with Hot-Tap version
Item # Description 2540 Adjustable 316SS Flow Sensor 325401 High Performance Flow Sensor with 1.5 in. NPT thread 325402 High Performance Flow Sensor with 1.5 in. ISO thread 12240021 Optional EPR Seal (Max. Temp.: 212°F/100°C) 325403 Hot Tap w/1.5" NPT 325404 Hot Tap w/1.5" ISO 31500.663 Hot Tap Insertion Tool
Price $384.93 384.93 4.91 537.23 537.23 312.94
The Signet 2540 offers the added strength and corrosion resistance of stainless steel for applications with low velocity measurements. Unique internal circuitry eliminates the need for magnets in the process fluid, enabling lower flow measurement while maintaining the advantages of insertion sensor design. The 2540’s unique rotor/bearing design offers low flow measuring capability with increased reliability. Pipe size range: 1.5in. to 24in. Consult Sales Office for applications above 24in.
COMPATIBILITY
Larger Pipe Sizes!
5500 Flow Monitor, 5600 Batch Controller, 8550 Flow Transmitter, 8900 Multi-Parameter Controller
USCO tech tip Installation For maximum linearity and accuracy, the sensor should be located in a straight run of pipe upstream and downstream of the sensor. Major obstructions such as pumps or throttled valves will require longer straight runs.
Order Toll Free (800) 343-7555
24-HOUR FAX LINE (800) 232-8726
17