J-12
5/15/02
6:12 PM
Page 1
BRASS FLARE & COMPRESSION FITTINGS 60 SERIES - BRASS COMPRESSION SLEEVE PART NUMBER
SIZE
7-604 7-606 7-607 7-608 7-6010 7-6014
1/4” 3/8” 7/16” 1/2” 5/8” 7/8”
64 SERIES - COMPRESSION TEES
PART NUMBER
SIZE
7-644 7-646 7-6410
1/4” 3/8” 5/8”
65 SERIES - COMPRESSION 90° ELL
61 SERIES - SHORT COMPRESSION NUT
PART NUMBER
SIZE
7-614 7-616
1/4” 3/8”
PART NUMBER
SIZE
7-654 7-656 7-6510 7-65106
1/4” 3/8” 5/8” 5/8” x 3/8”
66 SERIES - COMPRESSION x FIP COUPLING
61 C SERIES - COMPRESSION CAP PART NUMBER PART NUMBER
SIZE
7-61C4 7-61C6 7-61C8
1/4” 3/8” 1/2”
62 SERIES - COMPRESSION UNION
PART NUMBER
SIZE
1/4” 7-624 5/16” 7-625 5/16” X 1/4” 7-6254 3/8” 7-626 3/8” X 1/4” 7-6264 1/2” 7-628 1/2” X 3/8” 7-6286 5/8” 7-6210 5/8” X 3/8” 7-62106 5/8” X 1/2” 7-62108 7-621010DT 5/8” Drill thru 7/8” 7-6214
J-12
7-6644 7-6648 7-6664 7-6666 7-6668 7-6688 7-66108
SIZE 1/4” 1/4” X 1/2” 3/8” X 1/4” 3/8” 3/8” X 1/2” 1/2” 5/8” X 1/2”
Three piece unit: body, nut and sleeve. Straights and shapes are manufactured from CA360, CA345, CA377. Compatible with copper, brass, aluminum and thermoplastic tubing. (Thermoplastic tubing requires the use of a brass insert for support.) Low pressure air, oil, water and gas up to a maximum pressure of 400 psi. Fair vibration resistance. The long nut can be used for greater vibration application.