“PROFESSIONAL” OFFSET MOWERS
GROUP
A Floating (Lift float of the flail head with nitrogen accumulator)
Wear blade 2 screwed rows of counter-blades Inner lining
cm 60 offset Lift float
Pto shaft with overrun clutch
Rear adjustable roller with screwed edges
Mechanical breakaway
Hydraulic offset
TLP160A Front version for tractors with front mounting
Elastic Joint between gearbox and rotor
Mechanical breakaway HP Tractor
70
80
90
100
110
120
Min. tractor weight Kg
Min. tractor width m
TLP160
2400
1,80
TLP200
2600
2,00
TLP250
2800
2,20
Working positions (m) 166 cm
90°
120 cm
TLP 160
TLP 200
A 70°
TLP 250
B
A m B m
60 cm
TLP 160 TLP 200 TLP 250 2,63 3,23
2,99 3,59
3,53 4,13
Technical data Model
Cutting width
Min-Max sidesliding*
Flail head angle
Weight
Pto
Belts
Blade tip speed
degrees
Kg
Rpm
n°
m/sec
m
m
TLP160
1,61
2,63-3,23
70° 90°
1000
540
5
50
TLP160A
1,61
2,63-3,23
70° 90°
1000
1000
5
50
TLP200
1,97
2,99-3,59
70° 90°
1120
540
5
50
TLP250
2,51
3,53-4,13
70° 90°
1340
1000
1**
45
Equipped with:
Lift float of the flail head with
* Reach measured from tractor centre line to head edge ** Multiple belt
nitrogen accumulator
Hydraulic offset through a
parallelogram system (cm 60 offset)
Mechanical breakaway
Machines Model TLP160
TLP200
TLP250
Elastic Joint between
Flails
A B C A B C A B C
48 32 16 60 40 20 78 52 26
gearbox and rotor
hedge trimming flails multiuse “Y” blades forged hammer-blades hedge trimming flails multiuse “Y” blades forged hammer-blades hedge trimming flails multiuse “Y” blades forged hammer-blades
Reinforced frame Adjustable flow restrictor for flail head drop
Rear adjustable roller with screwed edges
Adjustable and wearproof side skids
Double wear blades
Machines with side-shift linkage for tractors with front mounting Model TLP160A
Flails
A B C
Adjustable cutting height Pto shaft with overrun clutch
48 hedge trimming flails 32 multiuse “Y” blades 16 Forged hammer-blades
Accessories Kit distributor with floating (cod. ZL1605)
Flails Specific rotor
Warning Interchangeable on the same rotor
Articulated hedge trimming blades for: Multiuse “Y” blades for: grass, bushes grass, bushes, shrubs
Forged hammer-blades for: twigs, grass
Ø max 1 cm
Ø max 4 cm
A
Cod. 0901139
Ø max 4 cm
B
Cod. 0901176
C
Cod. 0901175
FERRI srl - Via Govoni, 30 - 44034 Tamara (FE) Italy - Tel. +39 0532 866866 - Fax +39 0532 866851 - info@ferrisrl.it - www.ferrisrl.it Spare parts: Tel: +39 0532 866993 - Fax: +39 0532 867061 - e-mail: parts@ferrisrl.it After sales service: Tel: +39 0532 866991 - Fax: +39 0532 866851 - e-mail: service@ferrisrl.it
Suitable for tractors equipped with 2 distributors provided with 2 double acting sections, one of which with floating. In case the tractor has only one acting, it will be necessary to fit the kit distributor with floating (see option.) IT IS RECOMMENDED that the connection between tractor and shredder and its setting up should be made with the Dealer according the instructions and warnings listed on our Use and Maintenance Manual. For further information please contact our after sales service.