RH
ODES
H
19
51
SIG
T
FL
Sight Flow Glasses and Flow Indicators
The Widest Selection The Clearest View
OW SINC
E
Contents
Our Heritage
3
Quality Assurance
4
Product Overview
5
Sight Flow Indicator Applications
6
Sight Flow Indicator Benefits
7
Product Application Overview
9
Flow Indicators Series 400
2
Fig 400 Straight Through Sight Flow Indicator with Spinner
10
Fig 400B Straight Through Sight Flow Indicator with Ball
12
Flow Indicators Series 900 Fig 901 Sight Flow Indicator with Flow Fingers - Gunmetal
14
Fig 903 Straight Through Sight Flow Indicator with Integral Spout - Gunmetal
16
Fig 904 Straight Through Sight Flow Indicator with Flap and Scale Plate - Gunmetal
18
Fig 913 Straight Through Sight Flow Indicator with Integral Spout - Cast Iron
22
Fig 923 Straight Through Sight Flow Indicator with Integral Spout - Carbon Steel
24
Fig 933 Straight Through Sight Flow Indicator with Integral Spout - Stainless Steel
26
Additional Products
28
Gorgon Project
20
Product Application
30
Enquiry Specification Questionnaire
32
Notes
33
Sister Brands
34
Technical Helpline: +44 (0) 1462 443 277 E: rhodessales@cranebsu.com W: www.rhodesflow.com
Our Heritage
51 19
FL
T
Technical Helpline: +44 (0) 1462 443 277 E: rhodessales@cranebsu.com W: www.rhodesflow.com
H
With a proven design and over 65 years of operational experience, we are the UK market leaders. The Rhodes name is a guarantee of the highest quality product design and manufacture, with quality systems conforming to ISO 9001.
SIG
Rhodes manufacture and supply Sight Glasses and Sight Flow Indicators. Our products can be found in process and petrochemical plants all over the world, installed on fluid carrying systems where visual inspection of the flow is required.
ODES H R
OW SI
NC
E
The Rhodes product range has an international reputation for excellence and brings its own area of specialist expertise to markets right across the world. The standard range is well specified by major blue chip companies and is complemented by a design service to build bespoke items to specialist criteria.
3
Quality Assurance Rhodes Sight Flow Indicators are designed manufactured, and tested in dedicated production facilities based in the United Kingdom. Rhodes employ a continuous programme of research and product development using the very latest innovations in manufacturing technology. Quality systems are accredited to ISO 9001-2008 and 14001.
FM00311 ISO 9001
ISO 14001 Reg No. EMS 78657
Under the Pressure Equipment Directive (PED) all pressure equipment placed in the market after 29th May 2002 must be assessed against the pressure equipment regulations. As a leading International supplier, Rhodes has ensured that all products and standard documentation meet the directive requirements. However, the search for quality should mean more than just certificates, so each and every member of the Rhodes team strive to meet market and customer needs and aim to provide first class product, combined with the highest level of customer service.
4
Technical Helpline: +44 (0) 1462 443 277 E: rhodessales@cranebsu.com W: www.rhodesflow.com
Product Overview Rhodes Flow Indicators and Sight Glasses enable a visual check to assess if there is a flow of liquid through a pipeline. The pressure range available starts from full vacuum, up to 50 bar, with temperatures ranging from -150ºC up to 250ºC. Sight Glasses and Flow Indicators are available in various types as follows:
Available connection types:
• Straight through with drip spout
• Female screwed BSP Parallel ‘Rp’ BS EN 10226
• Straight through with flap and scale plate
• Female screwed BSP Parallel ‘G’ ISO 228
• Spinner type
• Female screwed NPT
• Flow fingers • Ball type Glass and joint options • Standard - supplied with nickel reinforced graphite joints and toughened soda lime glass • Extra options available include PTFE joints and Toughened Borosilicate glass
• Female screwed BSP Taper ‘Rc’ BS EN 10226
• Flanged ANSI 150RF • Flanged ANSI 150FF • Flanged ANSI 300RF • Flanged PN16 BS EN 1092 • Flanged PN25 BS EN 1092 • Flanged Table D BS10
Materials
• Flanged Table E BS10
• Stainless steel
• Flanged Table F BS10
• Gunmetal
• Flanged Table H BS10
• Carbon steel
• Buttweld ANSI B16.25
• Cast iron
• Socket Weld ANSI B16.11
Port connections • Female screwed • Flanged
All Rhodes products are PED compliant and CE marked where applicable. Full certification and documentation available as required.
Technical Helpline: +44 (0) 1462 443 277 E: rhodessales@cranebsu.com W: www.rhodesflow.com
5
Sight Flow Indicator Applications Application of Rhodes Flow Indicators 1. Protection & Performance of Equipment Rhodes moving member indicator models 400, 900 and 408 series provide operators with clear and easy indication of flow deviation, enabling quick and sure identification of flow failure with any cooling or lubricating liquid. Quick and easy identification of any flow issues is critical for both safe operation and prolonging the life of equipment. 2. Process Indication Many processes, whether automated or manual, still require the judgement of the human eye to ensure product quality and consistency. Rhodes models within the 900 series enable operators to clearly see what is happening inside a pipe or process vessel.
6
3. Liquid Storage and Transfer The distribution of liquids frequently embraces many stages of filling and emptying vessels as well as flow through pipelines. Efficiency and stock control often require an operator to know the status of a vessel or pipe and Rhodes Flow Indicators have filled this need for many years. We have analysed a number of application duties for Rhodes Flow Indicators and have summarised these by industry on the following sheet on pages 30 and 31.
Technical Helpline: +44 (0) 1462 443 277 E: rhodessales@cranebsu.com W: www.rhodesflow.com
Sight Flow Indicator Benefits Performance The Rhodes Fig.400 with Spinner is a versatile Sight Flow Indicator, which can be used in any orientation. These compact Sight Flow Indicators are used extensively in plant protection applications to indicate coolant or lubrication flow to pumps, compressors, and engines.
For further details, please refer to pages 10 and 11.
Technical Helpline: +44 (0) 1462 443 277 E: rhodessales@cranebsu.com W: www.rhodesflow.com
7
Installation image kindly supplied by SPX FLOW
Rhodes Fig.933 Sight Glass
8
Technical Helpline: +44 (0) 1462 443 277 E: rhodessales@cranebsu.com W: www.rhodesflow.com
Product Application Overview Breweries:
Oil Industry:
• Waste (brewing liquor/wine)
• Unloading arms
Cleaning:
• To observe the state of a liquid, colour, bubbles, flow rate or extraneous matter
• To observe injection of cleaning solvents and agents
Oil Platforms:
• To observe liquid quality on filter lines
• Sea water coolants
Furnaces:
Process Plants:
• On cooling lines
• Process lines
• To indicate reverse flow
• Cooling lines
Marine:
• Lubricating lines
• Cooling lines
Production:
• Fuel lines
• Lubricating lines on rolling mills
O.E.M:
• Cooling lines on rolling mills
• Compressors • Cooling lines • Cooling lines welding machines • Cooling lines injection moulding machines • Cooling lines paper making machinery • Steam condensate
Technical Helpline: +44 (0) 1462 443 277 E: rhodessales@cranebsu.com W: www.rhodesflow.com
9
FLOW INDICATORS / 400 SERIES
Fig.400 Straight Through Sight Flow Indicator with Spinner Flow Indicators are used as a visual aid to process operations and plant protection. They provide windows into pipelines, enabling the user to see immediately if flow is taking place and to observe colour and condition of the flow.
FEATURES & BENEFITS • Compact Sight Flow Indicators are used in plant room application to show coolant or lubrication flows to pumps, compressors and engines. This enables the user to view flow, presence and the condition of a liquid, gas or condensate. • The Fig. 400 is able to be positioned in any orientation enabling more flexibility when installing.
Fig.400 Stainless Steel
Fig.400 Gunmetal
DO DO NOTNOT SCALE SCALE 1 1
2 2
ALLALL DIMENSIONS IN IN MM MM UNLESS STATED OTHERWIS DIMENSIONS UNLESS STATED OTHERW
3 3
4 4
6
X X
C C
F F • The high sensitivity of the spinner (6) enables indication of flow as low as 0.7l/s (water).
• Available in both Gunmetal or Stainless Steel bodies (1) giving the user greater options of flow medium.
5 5 UNCONTROLLED COPY UNCONTROLLED COPY
E E
• The Nitrile seals (4) and Nylon spinner (6) give excellent chemical resistance which is further enhanced in the stainless steel version by the use of Borosilicate glass (3) as standard.
D D
For product application please refer to pages 30 and 31.
C C
DIMENSIONS Nominal Bore Size DN8 DN10
76
NOMINAL OVERALL MAXIMUM NOMINAL OVERALL MAXIMUM BORE SIZE 'A''A' WIDTH 'B''B' BORE SIZE LENGTH LENGTH WIDTH
Maximum Width B
Length A B B
76
57
DN15
76
57
DN20
83
57
DN25
89
70
76 76
57 57
15 15
76 76
57 57
20 20 55
83 83
0.5 57 57
57 30 57
25 25
89 89
70 70
70 70
55
0.5
51 51
Flowrate 51 51 (l/h, water) Min 54 54
50
NOTE: NOTE: 1. 1. SUITABLE FOR MOUNTING IN IN ANY POSITION SUITABLE FOR MOUNTING ANY POSITION 55 0.6 60
1 1
C CRANE LTD. C CRANE LTD.
58 2 2
68
B B
HEIGHT HEIGHT 'C''C'
8 8
Maximum Height 10 10 76 76 Weight (kg) 57 57 from Centre C
57 A A
X X
NPT BODIES MUST BE STAMPED 'NPT' OF TEXT HEIGHT 2.0 TO 5.0MM
ITEM NO.NO. DESCRIP ITEM DESCR 1 1
Flowrate (l/h, water) Max2 2 200 450 600
BODY BODY
COVER RI COVER
3 3
GLASS DO GLASS
4 4
SEALS SEALS
5 5
SPINNER SPINNE
6 6
SPINDLE SPINDL
THIS DRAWING IS IS A COPY ANDAND IS IS NOTNOT SUBJECT TO TO REVISION CONTR THIS DRAWING A120 COPY SUBJECT REVISION CO 0.6 1600 3 3
4 4
1.1
300
5 5
1600
THIRD ANGLE PROJECTION THIRD ANGLE PROJECTION 3 3
6
ST VERSION VERSION
MATERIAL MATERI DRAWN DRAWNVDDVDD04.04.16 04.04.16 REDRAWN REDRAWN Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Rhodes assumes responsibility or liability for IN no PRO-E IN PRO-E CHECKED CHECKED SCALE SCALE typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change withoutVDD notice. VDD 04.04.16 04.04.16 APPROVED APPROVED 1:1 1:1
10
Technical Helpline: +44 (0) 1462 443 277 E: rhodessales@cranebsu.com W: www.rhodesflow.com
FLOW INDICATORS / 400 SERIES MATERIALS OF CONSTRUCTION ITEM NO.
DESCRIPTION
1
Body (options)
BODY MATERIAL Gunmetal
BS EN 1982 CB491K ASTM A351 CF8M Brass BS2872 CZ122
Cover Ring
1 Stainless Steel
3
QTY
1 Stainless Steel Gunmetal
2
MATERIAL
Nickel Plated Brass BS2872 CZ122
Gunmetal
Soda Lime
Stainless Steel
Borosilicate
Glass Dome
1
4
Gaskets
Nitrile O Ring BS128
2
5
Spinner Mounting Pin
Stainless Steel 316
1
6
Spinner
Glass Filled Nylon
1
MAXIMUM RATINGS Gunmetal
Stainless Steel
Pressure 7 Barg
Pressure 16 Barg
Temperature 100ºC
Temperature 100ºC
END CONNECTIONS
2
SCREWED • BSP Taper Female ‘Rc’ BS EN 10226 • BSP Parallel Female ‘Rp’ BS EN 10226
3
4
• BSP Parallel Female ‘G’ ISO 228
6
• NPT Female
N.B. Fig. 400 is not available with flanged connections.
5
1 APPROVALS
FM00311 ISO 9001
ISO 14001 Reg No. EMS 78657
Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Rhodes assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice.
Technical Helpline: +44 (0) 1462 443 277 E: rhodessales@cranebsu.com W: www.rhodesflow.com
11
FLOW INDICATORS / 400 SERIES
Fig.400B Straight Through Sight Flow Indicator with Ball Flow Indicators are used as a visual aid to process operations and plant protection. They provide windows into pipelines, enabling the user to see immediately if flow is taking place and to observe colour and condition of the flow. The design of the 400B dictates that it must be installed with the glass upright. The ball is subject to wear and must be changed at service intervals.
FEATURES & BENEFITS • Compact Sight Flow Indicators are used in plant room application to show coolant or lubrication flows to pump, compressors and engines. This enables the user to view flow, presence and the condition of a liquid, gas or condensate. F
Fig.400B Gunmetal DO NOT DO NOT SCALE SCALE 1
1
ALL DIMENSIONS ALL DIMENSIONS IN MM INUNLESS MM UNLESS STATED STATED OTHERWISE OTHERWISE 2
2
3
3
4
4
5
5
6
6
UNCONTROLLED UNCONTROLLED COPYCOPY F
C
• The Fig.400B is easily maintained by unscrewing the glass retaining ring. E • Available in both Gunmetal or Stainless Steel bodies giving the user greater options of flow medium.
C
• The Fig.400B can handle a great variety of fluids, including gases and wide flow ranges. E
• The Nitrile seals (4) provide excellent chemical resistance, further enhancedDin D the stainless steel version by the use of Borosilicate glass (3) as standard. • When flow is present the PTFE ball (5) rises and oscillates within the glass dome. When flow stops, the ball drops.
C
A
C
DIMENSIONS Nominal Bore Size
Overall Length A
DN8
76
DN10
B
B
NOMINAL NOMINAL OVERALL OVERALL MAXIMUM MAXIMUM HEIGHT HEIGHT BORE BORE SIZESIZE LENGTH LENGTH 'A' 'A' WIDTH WIDTH 'B' 'B' 'C' 'C'
For product application please refer to pages 30 and 31.
B
A
8
B
8
76 76
57 57
54 54
10 10
76 76
57 57
55 55
15 15
76 76
57 57
55 55
ITEMITEM NO. NO.DESCRIPT DESC
3 GLASS GLASS DOM
57 57
59 59
70 70
Weight (kg)
68 68
Flowrate (l/h, water) Min
Flowrate 4 (l/h, water) Max
0.5
30
200
76
57
55
0.5
50
450
DN15
76
57
DN20
83
57
58
DN25
89
70
68
C CRANE C CRANE LTD. LTD.
3
83 83
55
1
2 COVER COVER RIN
89 89
57
1
2
20 20
Maximum Height from Centre C
A
1 BODY BODY
25 25
Maximum Width B A
1
55
5
4 SEALS SEALS 5 BALLBALL
THIS THIS DRAWING DRAWING IS A COPY IS A COPY AND AND IS NOT IS NOT SUBJECT SUBJECT TO REVISION TO REVISION CONTROL CONTROL - CHECK -C
2
2
0.6
3
3
60
4
4
600 5
0.6
120
1600
1.1
300
1600
THIRD THIRD ANGLE ANGLE PROJECTION PROJECTION
5
6
STAT VERSION VERSION
MATERIAL MATERI & DRAWN DRAWN VDDVDD18.05.16 18.05.16 CHECKED CHECKED
APPROVED APPROVED Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Rhodes assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice.
12
6
Technical Helpline: +44 (0) 1462 443 277 E: rhodessales@cranebsu.com W: www.rhodesflow.com
SCALE SCALE
1:1 1:1
FLOW INDICATORS / 400 SERIES MATERIALS OF CONSTRUCTION ITEM NO.
DESCRIPTION
1
Body (options)
BODY MATERIAL Gunmetal
BS EN 1982 CB491K ASTM A351 CF8M Brass BS2872 CZ122
Cover Ring
1 Stainless Steel
3
QTY
1 Stainless Steel Gunmetal
2
MATERIAL
Nickel Plated Brass BS2872 CZ122
Gunmetal
Soda Lime
Stainless Steel
Borosilicate
Glass Dome
1
4
Gaskets
Nitrile O Ring BS128
2
5
Ball
PTFE
1
MAXIMUM RATINGS Gunmetal
Stainless Steel
Pressure 7 Barg
Pressure 16 Barg
Temperature 100ºC
Temperature 100ºC
END CONNECTIONS SCREWED
2
• BSP Taper Female ‘Rc’ BS EN 10226 • BSP Parallel Female ‘Rp’ BS EN 10226 • BSP Parallel Female ‘G’ ISO 228 • NPT Female
3
N.B. Fig. 400B is not available with flanged connections.
4 5
APPROVALS
FM00311 ISO 9001
1
ISO 14001 Reg No. EMS 78657
Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Rhodes assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice.
Technical Helpline: +44 (0) 1462 443 277 E: rhodessales@cranebsu.com W: www.rhodesflow.com
13
FLOW INDICATORS / 900 SERIES
Fig.901 Sight Flow Indicator with Flow Fingers - Gunmetal The Fig 901 general purpose indicator used by equipment manufacturers and process plant users, employs Rhodes’ unique patented ‘flow fingers’ to provide flow indication. DO NOT SCALE
ALL D
1
FEATURES & BENEFITS • The Fig.901 ‘flow fingers’ (5) provide positive indication within clear and murky liquids. Manufactured from glass filled nylon they provide positive indication of flow, even under slow steady conditions.
2
3
NO B S
F
X C
X
Fig.901 Gunmetal
• ‘Flow fingers’ (5) are positioned in the middle of the flow (assuming full bore flow) with the middle finger inverted. The design of the flow fingers ensures that they ‘wiggle’
E
A unique product manufactured and sold only by Rhodes. D
DO NOT SCALE 1
For product application please refer to pages 30 and 31.
2
ALL DIMENSIONS IN MM UNLESS STATED OTHERWISE
3
4
5
6
NOMINAL OVERALL MAXIMUM HEIGHTMAXIMUM BORE LENGTH FROM CENTER WIDTH SIZE 'A' 'B' 'C'
C
ITEM NO.
B
F
15
X C
X
TEMPERATURE RATINGS
E
B
Temperature Max Pressure 16 Barg
-9.5ºC to 170ºC
7
UNCONTROLLED COPY
30
78
20
90
30
78
25
110
38
92
40
130
45
103
50
170
56
128
A
A
D
SECTION X-X
2
C
3
1
1
BODY
2
COVER
3
GLASS DISK 6
4
SPINDLE
5
FLOW FINGER
6
NUT
7 8
7 BOLT THIS DRAWING IS A COPY 8 GASKET
2
C CRANE LTD.
3
3 THIRD ANGLE PROJECTION
B
DIMENSIONS
90
2 DESCRIPTION
Screwed (mm)
Length A (mm)
15
90
20
90
B
Max Height From Centre B (mm)
Max Width C (mm) 6
30
78 A
A
Weight (kg)
7
0.9 SECTION Y-Y
8
SECTION X-X 30
78
0.9
THIS DRAWING IS A COPY AND IS NOT SUBJECT TO REVISION CONTROL - CHECK ISSUE BEFORE USE
25
110
1
38
C CRANE LTD.
2
3
92
4
5
6
1.7
7
STATUS
THIRD ANGLE PROJECTION
FIG
VERSION
40
130
45
103
DRAWN
N.A.K
06.04.16
3.1
CHECKED
50
170
56
128
APPROVED
5.8
MATERIAL & STANDARD SCALE
SHEET NO.
1:1
1 OF 1
Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Rhodes assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice.
14
Technical Helpline: +44 (0) 1462 443 277 E: rhodessales@cranebsu.com W: www.rhodesflow.com
DRAWIN NUMBE
FLOW INDICATORS / 900 SERIES MATERIALS OF CONSTRUCTION ITEM NO.
DESCRIPTION
BODY MATERIAL
1
Body
Gunmetal
BS EN 1982 CB491K
1
2
Cover
Mild Steel
BS EN 10025 S355 J2G3
2
Toughened Soda Lime 3
MATERIAL
QTY
BS3463
Glass Disc
2 Toughened Borosilicate Stainless Steel
DIN7080
4
Spindle
SS316
1
5
Flow Fingers
PES / Glass Filled Nylon
3 to 4
6
Nut
Mild Steel Zinc Plated
4
7
Bolt
Mild Steel Zinc Plated
4
Nickel Reinforced Graphite
4
8
Gasket PTFE
4
6 2 END CONNECTIONS
3
SCREWED • BSP Taper Female ‘Rc’ BS EN 10226
5
1
• BSP Parallel Female ‘Rp’ BS EN 10226 • BSP Parallel Female ‘G’ ISO 228 • NPT Female
N.B. Fig. 901 is not available with flanged connections.
8
4
7
APPROVALS
FM00311 ISO 9001
ISO 14001 Reg No. EMS 78657
Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Rhodes assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice.
Technical Helpline: +44 (0) 1462 443 277 E: rhodessales@cranebsu.com W: www.rhodesflow.com
15
FLOW INDICATORS / 900 SERIES
Fig.903 Straight Through Sight Flow Indicators with Integral Spout - Gunmetal This two sided flow indicator features an integral spout that produces a jetting action for turbulent flow thereby improving the viewing of clear liquids.
DO NOT SCALE 1
FEATURES & BENEFITS
2
3
NO B S
F
• The large viewing area allows the flow, colour and condition of the liquid to be observed. This helps monitor product quality and consistency.
X
X C
• The indicators are suitable for both vertical and horizontal installation. The inclusion of a spout also allows for use as a drip indicator to show valve leaks, distillation or intermittent flow.
E
Fig.903 Gunmetal DO NOT SCALE
• Available with screwed connections. Please refer to end connection options.
D
1
2
ALL DIMENSIONS IN MM UNLESS STATED OTHERWISE
3
4
5
6
UNCONTROLLED COPY
F
C
2
NOMINAL OVERALL MAXIMUM HEIGHTMAXIMUM ITEM DESCRIPTIO BORE LENGTH FROM CENTER WIDTH NO. SIZE 'A' 'B' 'C' 1 BODY 15 90 30 78 3
B
For product application please refer to pages 30 and 31.
ALL D
X
C
TEMPERATURE RATINGS
X
E
B
Temperature Max Pressure 16 Barg
20
90
30
78
25
110
38
92
40
130
45
103
50
170
56
128
COVER
3
GLASS DISK
4
NUT
5
BOLT
6
GASKET
4
A
-9.5ºC to 200ºC D
2
5 6
SECTION X-X
A
THIS DRAWING IS A COPY
2 1
2
3
C
Nominal Bore Size 15
C CRANE LTD.
THIRD ANGLE PROJECTION
3
B
DIMENSIONS
Overall Length A (mm)
Max Height From Centre B4 (mm)
90
30
B
Max Width C (mm)
5
78
6 20
A
90
SECTION Y-Y 78
30
SECTION X-X
A
25
110
38
92
THIS DRAWING IS A COPY AND IS NOT SUBJECT TO REVISION CONTROL - CHECK ISSUE BEFORE
40
1
130
C CRANE LTD.
50
170
2
3
45
4
5
6
103
STATUS
THIRD ANGLE PROJECTION
56
DRAWN
N.A.K
128
29.08.16
CHECKED APPROVED
MATERIAL & STANDARD SCALE
SHEET NO.
4:5
1 OF 1
Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Rhodes assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice.
16
F
VERSION
Technical Helpline: +44 (0) 1462 443 277 E: rhodessales@cranebsu.com W: www.rhodesflow.com
D N
FLOW INDICATORS / 900 SERIES MATERIALS OF CONSTRUCTION ITEM NO.
DESCRIPTION
BODY MATERIAL
1
Body
Gunmetal
BS EN 1982 CB491K
1
2
Cover
Mild Steel
BS EN 10025 S355J2G3
2
3
Glass Disc
MATERIAL
Toughened Soda Lime
BS3463
Borosilicate Glass
DIN 7080
QTY
2
4
Nut
Mild Steel Zinc Plated
4
5
Bolt
Mild Steel Zinc Plated
4
6
Gasket
Nickel Reinforced Graphite 4 PTFE
2
5
END CONNECTIONS SCREWED
3
• BSP Taper Female ‘Rc’ BS EN 10226 • BSP Parallel Female ‘Rp’ BS EN 10226 • BSP Parallel Female ‘G’ ISO 228
1
• NPT Female N.B. Fig. 903 is not available with flanged connections.
6 4 APPROVALS
FM00311 ISO 9001
ISO 14001 Reg No. EMS 78657
Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Rhodes assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice.
Technical Helpline: +44 (0) 1462 443 277 E: rhodessales@cranebsu.com W: www.rhodesflow.com
17
FLOW INDICATORS / 900 SERIES
Fig.904 Straight Through Sight Flow Indicator with Flap and Scale Plate - Gunmetal The Fig.904 incorporates a pivoted internal flap (5), which provides indication of change in the rate of flow, from a drip to full flow.
FEATURES & BENEFITS
DO NOT SCALE
• The internal stainless steel flap (5) is electro polished to improve viewing in murky liquids.
ALL DIMENSIONS IN M
1
2
3
4
U F
• The indicators are suitable for both horizontal and vertical upward flows.
15
Fig.904 Gunmetal
C
• A variety of glass and gasket materials are available as standard.
NOMINAL OVERAL BORE LENGTH SIZE 'A'
X
X
E
For product application please refer to pages 30 and 31. D ALL DIMENSIONS IN MM UNLESS STATED OTHERWISE
DO NOT SCALE 1
2
3
4
5
6
UNCONTROLLED COPY F
X
X C
Temperature Max Pressure 16 Barg
NOMINAL OVERALL MAXIMUM HEIGHTMAXIMUM BORE LENGTH FROM CENTER WIDTH SIZE 'A' 'B' 'C'
B
TEMPERATURE RATINGS
B
E
-9.5ºC to 200ºC A
D
130
50
170
2 DESCRIPTION
4
1
BODY
GUNMETAL BS
2
COVER
3 STEEL MILD BS EN 10025 S3
3
GLASS DISK
TOUGHENED S TOUGHENED B ANNEALED BOR 7
64
20
90
30
64
25
110
39
78
32
130
45
104
4
SPIROL PIN
SPRING STEEL
40
130
45
104
5
FLAP
ST. STEEL SS31
50
170
58
123
6
SCALE PLATE
ST. STEEL SS31
7
NUT
MILD STEEL ZIN
5
A
1
9
8 THISBOLT MILD STEEL DRAWING IS A COPY AND IS NOTZIN S 9
2
4 C CRANE LTD.
3
GASKET
NICKEL REINFO 4
THIRD ANGLE PROJECTION
B
3
DRAW
CHEC
5
Overall Length A (mm) B
Max Height From Centre B (mm)
15
90
30
Max Width C (mm)
7
A
90
130
40
30
Nominal Bore Size
20
32
90
2
DIMENSIONS
110
15
SECTION X-X
C
90
25
7 ITEM NO.
C
9
1 C CRANE LTD.
2
APPRO
78
A SECTION X-X
90
20
6
SECTION Y-Y THIS DRAWING IS A COPY AND IS NOT SUBJECT TO REVISION CONTROL - CHECK ISSUE BEFORE USE
30
3
4
5
78
6
7
STATUS
THIRD ANGLE PROJECTION
FIG 904 SCR
VERSION
25
110
38
DRAWN
VDD
92
22.08.16
CHECKED APPROVED
40
130
45
103
50
170
56
128
MATERIAL & STANDARD SCALE
SHEET NO.
7:10
1 OF 1
DRAWING NUMBER
Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Rhodes assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice.
18
Technical Helpline: +44 (0) 1462 443 277 E: rhodessales@cranebsu.com W: www.rhodesflow.com
FIG 9
FLOW INDICATORS / 900 SERIES MATERIALS OF CONSTRUCTION ITEM NO.
DESCRIPTION
BODY MATERIAL
1
Body
Gunmetal
BS EN 1982 CC491K
1
2
Cover
Mild Steel
BS EN 10025 S355J2G3
2
3
Glass Disc
MATERIAL
Toughened Soda Lime
BS3463
Borosilicate Glass
DIN 7080
QTY
2
4
Spirol Pin
Spring Steel
5
Flap
6
Scale Plate
Aluminium
1
7
Nut
Mild Steel Zinc Plated
4
8
Bolt
Mild Steel Zinc Plated
4
Nickel Reinforced Graphite
4
9
Gasket PTFE
4
Stainless Steel
2
SS316
1
8
2 END CONNECTIONS SCREWED
6
• BSP Taper Female ‘Rc’ BS EN 10226
3
9
• BSP Parallel Female ‘Rp’ BS EN 10226 • BSP Parallel Female ‘G’ ISO 228
1
• NPT Female
N.B. Fig. 904 is not available with flanged connections.
5
7
APPROVALS
FM00311 ISO 9001
4
ISO 14001 Reg No. EMS 78657
Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Rhodes assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice.
Technical Helpline: +44 (0) 1462 443 277 E: rhodessales@cranebsu.com W: www.rhodesflow.com
19
Gorgon Project The largest single resource development in Australia's history and one of the world's largest natural gas projects. Customer: Barton Firtop. Client: Chevron and Exxon Mobil Location: Barrow Island, Western Australia Rhodes supplied several Type A Sight Glasses from 80mm up to 200mm in Carbon Steel and Stainless Steel.
20
Technical Helpline: +44 (0) 1462 443 277 E: rhodessales@cranebsu.com W: www.rhodesflow.com
© Chevron Australia
Technical Helpline: +44 (0) 1462 443 277 E: rhodessales@cranebsu.com W: www.rhodesflow.com
21
FLOW INDICATORS / 900 SERIES
Fig. 913 Straight Through Sight Flow Indicator with Integral Spout - Cast Iron This two sided flow indicator features an integral spout that produces a jetting action for turbulent flow thereby improving the viewing of clear liquids.
FEATURES & BENEFITS • The large viewing area allows the flow, colour and condition of the liquid to be observed, enabling the monitoring of product quality and consistency.
ALL DIMENSIONS IN M 2
3
U F
X
Fig.913 Cast Iron
X
E
• Available with flanged end connections, see table for further detail.
D ALL DIMENSIONS IN MM UNLESS STATED OTHERWISE
DO NOT SCALE 1
2
3
4
IF IN DOU
5
6
UNCONTROLLED COPY
For product application please refer to pages 30 and 31.
4
C
• This indicator is suitable for both vertical and horizontal installation. The inclusion of a spout allows for use as a drip indicator to show valve leaks, distillation or similar conditions.
DO NOT SCALE 1
F
7 ITEM NO.
DESCRIPTION
MATERIA
1
BODY
CAST IRON BS EN 1561
2
COVER
MILD STEEL BS EN 1002
3
GLASS DISK
TOUGHENED SODA LIM TOUGHENED BOROSILI ANNEALED BOROSILICA
4
NUT
MILD STEEL ZINK PLATE
5
BOLT/STUD
MILD STEEL ZINK PLATE
6
GASKET
NICKEL REINFORCED G
B
C
8
X
X C
E
B
TEMPERATURE RATINGS Max. Temperature
D
0ºC
180ºC
C
C
A
A
NOMINAL OVERALL MAXIMUM MA BORE LENGTH HEIGHT W THIS DRAWING COPY AND'B' IS NOT SU SIZE IS A'A'
SECTION X-X 1
25
140
40 THIRD ANGLE PROJECTION 50
180
90
220
115
80
260
168 DRAW
100
310
2
3
C CRANE LTD.
B
B
Max Pressure 16 Barg
Min. Temperature
B
4
77
-
CHECK
APPROV
DIMENSIONS A
Flanged (mm)
Length A (mm)
25
140
A Max Height from SECTION X-X Centre B (mm) 1 C CRANE LTD.
2
38
Max Width C (mm)
SECTION Y-Y
Weight (kg)
THIS DRAWING IS A COPY AND IS NOT SUBJECT TO REVISION CONTROL - CHECK ISSUE BEFORE USE 3
THIRD ANGLE PROJECTION
4
5
6
7
STATUS
94
3.5
VERSION
DRAWN CHECKED
N.A.K
10.08.16
MATERIAL & STANDARD
40
180
45
120
50
220
56
135
10.5
80
260
86
186
20.5
100
310
94
224
35.5
APPROVED
8
FIG 913 FLAN
6.5 SHEET NO.
SCALE
2:5
1 OF 1
DRAWING NUMBER
Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Rhodes assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice.
22
Technical Helpline: +44 (0) 1462 443 277 E: rhodessales@cranebsu.com W: www.rhodesflow.com
FIG 913
FLOW INDICATORS / 900 SERIES MATERIALS OF CONSTRUCTION ITEM NO.
DESCRIPTION
BODY MATERIAL
1
Body
Cast Iron
BS EN 1561 EN-GJL-250
1
2
Cover
Mild Steel
BS EN 10025 S355 J2G3
2
3
MATERIAL
Toughened Soda Lime
BS3463
Toughened Borosilicate
DIN7080
QTY
Glass Disc
2
4
Nut
Mild Steel Zinc Plated
4
5
Bolt
Mild Steel Zinc Plated (quantity depends on size)
4
6
Gasket
Nickel Reinforced Graphite 4 PTFE
2 END CONNECTIONS
4
3
FLANGED
1
• ANSI 150RF • ANSI 150FF • PN16 BS EN 1092 • Table D BS10 • Table E BS10 • Table F
N.B. Models 913 is not available with screwed ends.
5
6
APPROVALS
FM00311 ISO 9001
ISO 14001 Reg No. EMS 78657
Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Rhodes assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice.
Technical Helpline: +44 (0) 1462 443 277 E: rhodessales@cranebsu.com W: www.rhodesflow.com
23
FLOW INDICATORS / 900 SERIES
Fig. 923 Straight Through Sight Flow Indicator with Integral Spout - Carbon Steel This two sided flow indicator features an integral spout that produces a jetting action for turbulent flow thereby improving the viewing of clear liquids. DO NOT SCALE 1
FEATURES & BENEFITS
ALL DIMENSIONS IN MM UNLESS STATED OTHERWISE 2
3
4
• This indicator is suitable for both vertical and horizontal installation. The inclusion of a spout allows for use as a drip indicator to show valve leaks, distillation or similar conditions. • Available with screwed and flanged end connections, see table below for further detail.
NOMINAL OVERALL MAXIMUM HEIGHTMAXIMUM BORE LENGTH FROM CENTER WIDTH SIZE 'A' 'B' 'C'
X
X E
Fig.923 Carbon Steel
7
15
90
30
78
20
90
30
78
25
110
38
92
40
130
45
117
50
170
56
134
ITEM NO.
D NPT BODIES MUST BE STAMPED 'NPT' OF TEXT HEIGHT 2.0 TO 5.0 MM
DESCRIPTION
1
BODY
CARBON
2
COVER
MILD ST
3
GLASS DISK
TOUGHE TOUGHE ANNEAL
4
NUT
MILD ST
5
BOLT
MILD ST
6
GASKET
NICKEL R
2
Y
1
C
3
B
For product application please refer to pages 30 and 31.
TEMPERATURE RATINGS
4 B
Materials
Carbon Steel
6
F
C
• The large viewing area allows the flow, colour and condition of the liquid to be observed, enabling monitoring of product quality and consistency.
Body
5 UNCONTROLLED COPY
5
Temperature
Covers & Bolting
Gaskets
Mild Steel
NRG
-9.5ºC to 250ºC
Mild Steel
PTFE
-9.5ºC to 200ºC
6
Y
*At ambient temperature. Maximum pressure may be reduced by flange rating or by elevated temperatures. Please request further information if required.
SECTION Y-Y
A
A
SECTION X-X 1
2
C CRANE LTD.
THIS DRAWING IS A COPY AND IS NOT SUBJECT TO REVISION CONTROL - CHECK ISSUE BEFORE USE 3
4
5
6
7
STATUS
THIRD ANGLE PROJECTION DRAWN
VDD
02.06.16
CHECKED
DIMENSIONS
APPROVED
SCREWED
MATERIAL & STANDARD SCALE
SHEET NO.
7:10
1 OF 1
FLANGED
Nominal Bore Size
Length A (mm)
Max Height from Centre B (mm)
Max Width C (mm)
Weight (kg)
Nominal Bore Size
Length A (mm)
Max Height from Centre B (mm)
Max Width C (mm)
Weight (kg)
15
90
30
80
0.9
25
140
38
94
3.5
20
90
30
80
0.9
40
180
45
120
6.5
25
110
38
94
1.7
50
220
56
135
10.5
40
130
45
120
3.1
80
260
86
186
20.5
50
170
56
135
5.8
100
310
94
224
35.5
150
358
120
306
76
Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Rhodes assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice.
24
FIG 9
VERSION
Technical Helpline: +44 (0) 1462 443 277 E: rhodessales@cranebsu.com W: www.rhodesflow.com
DRAWING NUMBER
F
FLOW INDICATORS / 900 SERIES MATERIALS OF CONSTRUCTION ITEM NO.
DESCRIPTION
BODY MATERIAL
1
Body
Carbon Steel
2
Cover
Mild Steel
3
Glass Disc
MATERIAL
QTY
ASTM A216 WCB
1
BS EN 10025 S355 J2G3
2
Toughened Soda Lime
BS3463
Toughened Borosilicate
DIN 7080
2
Nickel Reinforced Graphite 4
Gasket
4 PTFE
5
Bolts
Mild Steel Zinc Plated
4
6
Nuts
Mild Steel Zinc Plated
4
MAXIMUM RATINGS Full Vacuum to 25 Bar Dependent on connection type
END CONNECTIONS SCREWED
2
FLANGED
• BSP Taper ‘Rc’ BS EN 10226
• ANSI 150 RF
• BSP Parallel ‘Rp’ BS EN 10226
• ANSI 300 RF
• BSP Parallel ‘G’ ISO 228
• PN25 BS EN 1092
• NPT
• Table E BS10
• Buttweld ANSI B16.25
• Table F BS10
• Socket Weld ANSI B16.11
• Table H BS10
6
3
• ANSI 150 FF • PN16 BS EN 1092
1
4
*Other end connections available on request.
5
APPROVALS
FM00311 ISO 9001
ISO 14001 Reg No. EMS 78657
Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Rhodes assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice.
Technical Helpline: +44 (0) 1462 443 277 E: rhodessales@cranebsu.com W: www.rhodesflow.com
25
FLOW INDICATORS / 900 SERIES
Fig.933 Straight Through Sight Flow Indicator with Integral Spout - Stainless Steel This two sided flow indicator features an integral spout that produces a jetting action for turbulent flow thereby improving the viewing of clear liquids.
DO NOT SCALE
ALL D
1
2
3
F
NO B S
FEATURES & BENEFITS C E
• This indicator is suitable for both vertical and horizontal installation. The inclusion of a spout allows for use as a drip indicator to show valve leaks, distillation or similar conditions.
Fig.933 Stainless Steel
D
DO NOT SCALE 1
• Available with screwed and flanged end connections, see table below for further detail.
ALL DIMENSIONS IN MM UNLESS STATED OTHERWISE 2
3
4
NOMINAL OVERALL MAXIMUM HEIGHTMAXIMUM BORE LENGTH FROM CENTER WIDTH SIZE 'A' 'B' 'C'
C
15
Temperature
B
A
D
Covers & Bolting
Gaskets
Mild Steel
NRG
-9.5ºC to 250ºC
Mild Steel
PTFE
-9.5ºC to 200ºC
Stainless Steel
NRG
-150ºC to 250ºC
Stainless Steel
PTFE
-150ºC to 200ºC
2
20
90
30
88
25
110
38
94
32
130
45
113
40
130
45
129
50
170
A 56
146
1
BODY 4
2
COVER
3
GLASS DISK
4
NUT
5
BOLT
5
6
6 GASKET THIS DRAWING IS A COP
2
3 THIRD ANGLE PROJECTION
B
5
FLANGED
Max Height from Centre B (mm)
Max Width A C (mm)
Weight (kg)
15
90
30
80
0.9
30 38
Flanged (mm) A SECTION X-X
82 94
1
0.9
C CRANE LTD.
1.7
2
Length A (mm)
-
3
140
THIRD ANGLE PROJECTION
40
Max Width C (mm)
SECTION Y-Y Weight (kg)
THIS DRAWING IS A COPY AND IS NOT SUBJECT TO REVISION CONTROL - CHECK ISSUE BEFORE
-
25
6 Max Height from Centre B (mm)
180
38 45
40
130
45
120
3.1
50
220
56
50
170
56
135
5.8
80
260
86
100
310
150
358
-
4
94
-
5
120 DRAWN
135
CHECKED
6
3.5 6.5
STATUS
VERSION
N.A.K
02.08.16
MATERIAL & STANDARD
10.5
136
20.5
94
224
35.5
120
306
76
APPROVED
SCALE
SHEET NO.
7:10
1 OF 1
Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Rhodes assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice.
26
1
4 B
Length A (mm)
110
88
3 DESCRIPT
3
Screwed (mm)
25
30
C CRANE LTD.
C
SCREWED
90
90
SECTION X-X
DIMENSIONS
20
2
ITEM NO.
B X
X
TEMPERATURE RATINGS
Stainless Steel
6
C
F
E
Body
5 UNCONTROLLED COPY
For product application please refer to pages 30 and 31.
Materials
X
X
• The large viewing area allows the flow, colour and condition of the liquid to be observed, enabling monitoring of product quality and consistency.
Technical Helpline: +44 (0) 1462 443 277 E: rhodessales@cranebsu.com W: www.rhodesflow.com
D N
FLOW INDICATORS / 900 SERIES MATERIALS OF CONSTRUCTION ITEM NO.
DESCRIPTION
BODY MATERIAL
1
Body
Stainless Steel
2
Cover
Mild Steel
3
Glass Disc
MATERIAL
QTY
ASTM A351 CF8M
1
BS EN 10025 S355 J2G3
2
Toughened Soda Lime
BS3463
Toughened Borosilicate
DIN7080
Annealed Borosilicate
BS3463
2
4
Nut
Mild Steel Zinc Plated / Stainless Steel
4
5
Bolt
Mild Steel Zinc Plated / Stainless Steel (quantity depends on size)
4
6
Gasket
Nickel Reinforced Graphite / PTFE
4
MAXIMUM RATINGS Full Vacuum to 25 Bar Dependent on connection type
END CONNECTIONS SCREWED
FLANGED
• BSP Taper Female ‘Rc’ BS EN 10226
• ANSI 150 RF
• BSP Parallel Female ‘Rp’ BS EN 10226
• ANSI 300 RF
• BSP Parallel Female ‘G’ ISO 228
2
• ANSI 150 FF
4
3
• PN16 BS EN 1092 • PN25 BS EN 1092
• NPT
• Table E BS10
• Socket Weld
• Table F BS10
• Butt Weld
• Table H BS10
1
6
*Other end connections available on request.
5 APPROVALS
FM00311 ISO 9001
ISO 14001 Reg No. EMS 78657
Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Rhodes assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice.
Technical Helpline: +44 (0) 1462 443 277 E: rhodessales@cranebsu.com W: www.rhodesflow.com
27
ADDITIONAL PRODUCTS
Additional Products This double sided sight flow indicator incorporates a simple paddle wheel spinner. The rate at which the spinner rotates provides a visual indication of flow and fluctuation in flow. The stainless steel spinner and mounting pin provide excellent corrosion resistance. The Fig.408 is particularly versatile as its design enables installation in both horizontal and vertical positions. Operating over a wide flow range it extends the duties of the smaller Fig.400 for larger pipework and higher pressures and temperatures. This unit is available with a variety of standard screwed or flanged end connections. Size options range from 8mm to 50mm for screwed end connections and from 25mm to 100mm for flanged end connections. Other options include a choice of materials; Body: Cast Iron, Gunmetal, Carbon Steel or Stainless Steel Glass: Toughened Soda Lime or Toughened Borosilicate Gaskets: Nickel Reinforced Graphite or PTFE
Fig.408 Straight Through Sight Flow Indicator with Spinner
The Fig.914 sight flow indicator is a variant of the Fig.913, incorporating a stainless steel flap and scale plate, which has a scale reading from 1 to 10. The flap is hinged in place above the internal drip spout. As liquid flows through the unit the flap is forced to move through an arc. The position of the flap in relation to the graduated scale-plate, indicates changes of the rate of flow of a liquid in a pipeline, from a drip to full flow conditions. The internal stainless steel flap is electro polished to improve viewing in murky liquids. The Fig.914 is suitable for both horizontal and vertical upward flows. Maximum working pressure: 16 Bar Maximum working temperature: 180ºC This unit is available with a variety of standard screwed or flanged end connections. Other options include a choice of; Glass: Toughened Soda Lime or Toughened Borosilicate Gaskets: Nickel Reinforced Graphite or PTFE
28
Fig.914 Cast Iron Steel Straight Through Sight Flow Indicator with Flap and Scale Plate
Technical Helpline: +44 (0) 1462 443 277 E: rhodessales@cranebsu.com W: www.rhodesflow.com
ADDITIONAL PRODUCTS The Fig.924 sight flow indicator is a variant of the Fig.923, incorporating a stainless steel flap and scale plate, which has a scale reading from 1 to 10. The flap is hinged in place above the internal drip spout. As liquid flows through the unit, the flap is forced to move through an arc. The position of the flap in relation to the graduated scale-plate, indicates changes of the rate of flow of a liquid in a pipeline, from a drip to full flow conditions. The internal stainless steel flap is electro polished to improve viewing in murky liquids. The Fig.924 is suitable for both horizontal and vertical upward flows. Maximum working pressure: 25 Bar Maximum working temperature: 250ºC This unit is available with a variety of standard screwed or flanged end connections. Other options include a choice of; Glass: Toughened Soda Lime or Toughened Borosilicate
Fig.924 Carbon Steel Straight Through Sight Flow Indicator with Flap and Scale Plate
Gaskets: Nickel Reinforced Graphite or PTFE
The Fig.934 Sight Flow Indicator is a variant of the Fig.933, incorporating a stainless steel flap and scale plate, which has a scale reading from 1 to 10. The flap is hinged in place above the internal drip spout. As liquid flows through the unit, the flap is forced to move through an arc. The position of the flap in relation to the graduated scale-plate, indicates changes of the flow rate of a liquid in a pipeline, from a drip to full flow conditions. The internal stainless steel flap is electro polished to improve viewing in murky liquids. The Fig.934 is suitable for both horizontal and vertical upward flows. Maximum working pressure: 25 Bar Maximum working temperature: 250ºC This unit is available with a variety of standard screwed or flanged end connections. Other options include a choice of; Glass: Toughened Soda Lime or Toughened Borosilicate Gaskets: Nickel Reinforced graphite or PTFE
Fig.934 Stainless Steel Straight Through Sight Flow Indicator with Flap and Scale Plate
The Type A enables operators to clearly see what is happening inside a pipe or a process vessel. A simple, robust, straight through sight flow indicator, comprising a good quality cast body which is recessed to hold toughened glass windows on two sides. The glasses are held in place by steel covers and high tensile bolts. The gaskets of this unit fit into the same recess as the glass windows and consequently cannot be blown out by excessive pressure. This sight flow indicator is available with a variety of standard flanged end connections and size options range from 25mm to 200mm. Other options include a choice of materials; Body: Cast Iron, Carbon Steel or Stainless Steel Glass: Toughened Soda Lime or Toughened Borosilicate Gaskets: Nickel Reinforced Graphite or PTFE
Type A Flow Indicator For any other required materials of construction and working pressures which are outside the ranges listed in the catalogue please get in touch with our sales team.
Technical Helpline: +44 (0) 1462 443 277 E: rhodessales@cranebsu.com W: www.rhodesflow.com
29
PRODUCT APPLICATION
Product Application Equipment / Application
Duty
Rhodes Model
Industry
PROTECTION AND PERFORMANCE OF EQUIPMENT
30
Air Compressors - Small
Indicating flow in cooling water circuits
400, 408, 900 Series (Flap Type)
General manufacturing Venhicle workshops Public utilities
Air Compressors - Large
Indicating flow in cooling water circuits Indicating flow of oil to lubricating circuits for bearings (Including: High temperature)
408, 900 Series Type A
Heavy industry Large equipment mfg’s Process Plants
Gas Compressors
Indicating flow in cooling water circuits Indicating flow of lubricating oil Protection of seal oil interface
408, 900 Series Type A
Oil and gas production platforms Oil and gas pipeline stations Ship loading
Turbine Generators
High and low flow rate water monitoring Indicating flow in cooling water circuits Flow balancing indication to generators Indicating filtration performance Indicating condensate flow
900 Series (Flap Type) 900 Series (Straight Through) Type A
Power generation Land and marine
Engines
Indicating flow in cooling water circuits Monitoring fuel feed lines Indicating lubrication oil flows to bearings Indicating drain line flow
400, 408 900 Series (Flap Type) 900 Series (Straight Through) Type A
Power generation Land and marine Shipping Fire protection
Welding Machines & Robotics
Indicating flow to electrodes
400, 408 900 Series (Flap Type)
Motor Industry Domestic Appliance Manufacture
Injection Moulding Machines
Indicating flow of heating and cooling circuit fluids
400, 408 900 Series (Flap Type)
Component Mfg Food packaging Product packaging
Cavity Wall Injection Machines
Indicating balance of flows of liquids
400
Industrial and domestic premises (energy conservation)
Furnaces
Indicating flow in cooling water circuits Flow balancing indication
400,408 900 Series (Flap type)
Metal Processing
Rolling Mills
Indicating flow of lubrication oil Indicating cooling water flow to dies and quenching water processes
900 Series Type A
Steel Industry
Paper making machinery
Indicating flow in condensate detection and recovery lines
900 Series Type A
Paper, board and compressed fibre manufacture
Boilers
Indicating boiler feed water flow Dosing additive flow indication Condensate detection and recovery Indicating oil flow
400, 408 900 Series Type A
Industrial and commercial H&V Laundries Process plants
Dry cleaning machines
Indicating flow from filters Indicating flow of cleaning agents
900 Series (Flap Type)
Industrial laundries Dry cleaners
Technical Helpline: +44 (0) 1462 443 277 E: rhodessales@cranebsu.com W: www.rhodesflow.com
PRODUCT APPLICATION
Equipment / Application
Duty
Rhodes Model
Industry
PROCESS INDICATION Refining Catalyst reaction Heating vessels
Fryers Filter Banks Liquid Recovery Plant Blending Fermenting
Indicating colour change due to heating or catalyst action
Indicating filter failure (Indicating quality of product)
900 Series (Straight Through) Type A
Sugar Food processing Pharmaceutical Oil refining Chemical Blending
900 Series (Straight Through) Type A
Food processing Brewing Soft drinks Edible oils Water treatment Pulp and paper Chemicals Cement, ore and metal processing
Process pipelines Temperature control Vessel Evacuation
Indicating two phase flow (eg: bubbles through liquids)
900 Series (Straight Through) Type A
Power generation Food processing chemical production Flavour and colouring Dairy Brewing
Process vessels Temperature control Ingredient Controls Blending
Indicating viscosity change and media expansion Indicating completion of process cycles
900 Series (Straight Through) Type A
Plastic manufacture Oil industry Paint and varnish Sealants and fillers Toiletries
Quality control in; Blending Dosing and ratio control Dye injection Ore processing Process Vessels
Indicating flow of feedstocks and particularly slurries
400, 900 Series Type A
All major process industries (Including man made fibres)
LIQUID STORAGE AND TRANSFER Marine loading and discharge of product and bunker Rail offloading of fuel, oil, gas oil and Nahptha. Pipeline transfer between storage Dye injection of finished product
Indicating liquid flow
400, 408 900 Series Type A
Petroleum production Oil refining Chamical blending and storage
Fire water distribution on fixed plant
Indicating flow of safety safety water system
900 Series Type A
Oil production Paper and pulp hazardous areas Chemical Plants
Foam monitors on vehicles
Indication of foam blending
900 Series Type A
Liquid storage depots, Airfields
Technical Helpline: +44 (0) 1462 443 277 E: rhodessales@cranebsu.com W: www.rhodesflow.com
31
SISTER BRANDS
BUILDING SERVICES
The Brownall range of automatic air eliminators covers slow, medium and high pressure applications. They are suitable for use with water, aviation fuel, diesel and light oils. The range is complemented by threeway vent valves, offering efficient performance and reliable service combined with potential savings in time and cost by simplifying the venting system for single/multi-boiler or calorifier installations.
Crane Fluid Systems has manufactured for more than 90 years a range of malleable iron and bronze pipe fittings, traditional valves, as well as a range of commissioning valves for static and variable flow systems which includes a PICV terminal unit range. 01473 277300 or enquiries@cranefs.com
01462 443277 or brownallsales@cranebsu.com
For over 100 years the Hattersley brand has become synonymous with quality, reliability and excellent service. A variety of traditional valves, including ball, butterfly, check, gate and globe valves as well as a range of balancing solutions for constant & variable flow systems are available. In addition there is a range of public health valves which includes thermal circulation valves which help to prevent Legionnaires’ disease.
IAT Ingolstadt Armaturen is a brand of specialised water safety valves which were originally developed in Ingolstadt, Germany in the 1960s for the prevention of contamination of potable water by industrial, commercial or domestic activities. 01462 443 220 or iatsales@cranebsu.com
01473 277410 or uksales@hattersley.com
One of the UK’s leading suppliers of gunmetal safety valves, NABIC has long been recognised as the industry standard for commercial and industrial hot water applications.
An extensive range of low and medium pressure brass compression fittings, needle valves and accessories.
NABIC valves are ideal for hot water supply, heating, pump relief, bypass relief, outside installation and for use with different gases and liquids.
The range also covers SISTEM-P and compact push in fittings, nickel plated BSP fittings, silencers, safety relief valves for compressed air, nylon and copper tubing.
01462 443278 or nabicsales@cranebsu.com
01473 277 460 or wadesales@cranebsu.com
32
Technical Helpline: +44 (0) 1462 443 277 E: rhodessales@cranebsu.com W: www.rhodesflow.com
SISTER BRANDS
GAS UTILITIES
Sperryn is a leading supplier of meter installation kits and emergency control valves for domestic, commercial and industrial applications. Using the latest design facilities and technologies, Sperryn regulators offer increased capacity, accuracy and lower pressure drops. 01462 443 226 or sperrynsales@cranebsu.com
Market leader in the supply of specialist mains and service fittings, along with pipeline equipment of the highest quality, WASK is renowned in the global gas distribution market. WASK Teeset and bagging off equipment has become a standard in the UK gas industry and in many markets overseas. Latest additions to the range include a unique riser and lateral modular system which allows PE pipework to supply gas into single or multiple occupancy dwellings. 01462 443 225 or sales@wask-uk.com
WATER UTILITIES
PosiFlex expansion joints provide relief for piping system stress caused by thermal and mechanical vibration and/or movement, and can also be utilised to overcome problems of noise.
Viking Johnson is a world leader in the manufacture and supply of couplings, flange adaptors, pipe repair and jointing solutions for the international water, wastewater, gas and industrial markets.
These flexible connectors are fabricated from a wide range of rubber compounds, open or filled, single or multiple arch and are designed to accommodate the needs of individual pipe systems moving materials as diverse as fluids, foodstuffs, chemicals or crude oil.
Products are suitable for dedicated and wide tolerance application ranging from 15mm to 5000mm in diameter, and can be used to connect or repair many types of pipe material. 01462 443322 or info@vikingjohnson.com
01462 443131 or info@posiflex.co.uk
Technical Helpline: +44 (0) 1462 443 277 E: rhodessales@cranebsu.com W: www.rhodesflow.com
33
ERIKS vestigingen Stromingstechniek
ERIKS Servicecenters
Alkmaar Toermalijnstraat 5 1812 RL Alkmaar T (072) 514 15 14 F (072) 515 56 45 E info@eriks.nl
Alkmaar Saffierstraat 3 1812 RM Alkmaar T (072) 514 17 17 F (072) 514 16 25 E esc.alkmaar@eriks.nl
Eerbeek Loubergweg 19 6961 EJ Eerbeek T (0313) 67 95 00 F (0313) 65 47 68 E eerbeek@eriks.nl
Roermond Ada Byronweg 11 6045 GM Roermond T (0475) 37 22 70 F (0475) 37 23 05 E roermond@eriks.nl
Capelle aan den IJssel Cypresbaan 63 2908 LT Capelle a/d IJssel T (010) 284 11 00 F (010) 451 68 51 E info@econosto.com
Amsterdam Dynamostraat 46 1014 BK Amsterdam-Westpoort T (020) 448 96 10 F (020) 613 77 65 E amsterdam@eriks.nl
Eindhoven Industrieweg 15 5627 BS Eindhoven T (040) 291 19 00 F (040) 291 19 09 E eindhoven@eriks.nl
Terneuzen Communicatielaan 27B 4538 BV Terneuzen T (0115) 64 10 00 F (0115) 64 10 09 E terneuzen@eriks.nl
Elsloo Business Park Stein 157 6181 MA Elsloo LB T (046) 428 80 30 F (046) 428 80 59 E elsloo@eriks.nl
Arnhem Pieter Calandweg 46 6827 BK Arnhem T (026) 362 92 44 F (026) 361 00 63 E arnhem@eriks.nl
Elsloo Business Park Stein 157 6181 MA Elsloo LB T (046) 428 80 30 F (046) 428 80 59 E elsloo@eriks.nl
Twente Hassinkweg 16 7556 BV Hengelo T (074) 291 57 57 F (074) 291 59 39 E hengelo@eriks.nl
Rotterdam-Rijnmond Shannonweg 33, Haven 5079 3197 LG Rotterdam-Botlek T (010) 231 34 00 F (010) 296 96 18 E rijnmond@eriks.nl
Bergen op Zoom Van Konijnenburgweg 44 b 4612 PL Bergen op Zoom T (0164) 27 55 44 F (0164) 27 55 49 E bergenopzoom@eriks.nl
Groningen Rouaanstraat 8 9723 CD Groningen T (050) 368 49 99 F (050) 368 49 98 E groningen@eriks.nl
Zwolle Ampèrestraat 27 8013 PT Zwolle T (038) 467 29 20 F (038) 467 29 29 E zwolle@eriks.nl
Den Haag Neckar 2 2491 BD Den Haag T (070) 381 84 84 F (070) 381 84 36 E denhaag@eriks.nl
Leeuwarden Simon Vestdijkwei 15 8914 AX Leeuwarden T (058) 215 05 87 F (058) 215 85 16 E leeuwarden@eriks.nl
Ede Galvanistraat 34 6716 AE Ede T (0318) 43 96 14 F (0318) 64 01 04 E ede@eriks.nl
Rijnmond Shannonweg 33, Haven 5079 3197 LG Rotterdam-Botlek T (010) 231 34 00 F (010) 296 96 18 E rijnmond@eriks.nl
Volg ERIKS online:
www.eriks.nl/socialmedia
www.eriks.nl shop.eriks.nl