Reconditioning / replacing: Engine body
Transmission, replacing Valve cover, cable harness, upper transmission casing, camshaft sensor and oil pan have been removed.
Removal 1.
Remove the flywheel sensor.
2.
Turn the engine to TDC on the camshaft, check that the mark on the flywheel is at �0�.
3.
Secure lifting chain 9996239 in the flywheel. Remove the flywheel. WARNING! Pinching hazard. The flywheel weighs about 40 kg (90 lbs)
4.
Remove the starter motor, rear lifting eyes, fuel pump together with the servo pump, the cover and any rear engine mounts.
125