PORTFOLIO
Selected works
2024
My name is María Emilia Vargas, I am a recently graduated architect. I am constantly seeking to grow as a professional and to develop the knowledge acquired during my education. I consider myself proactive, responsible, and dedicated.
I have skills for teamwork and the use of architectural software. I am passionate about interior design as well as architectural visualization.
Cv
WORK EXPERIENCE
Bórmida & Yanzón- Interior design
November 2022 - September 2023
- Development of executive documentation
- Correction of architectural plans
- 3D modeling and rendering
- Furniture design and development
- Construction progress monitoring
EDUCATION
University of Architecture and Urbanism; Universidad Nacional de Cuyo
2017 - 2023
TRAINING PROGRAMS
2024
2022
2020
2020
Modeling in 3DS Max and VRAY | IONCE
Parametric Buildings in Revit | Arturo Casanova
Architectural Modeling in Revit | Arturo Casanova
Emergent Housing Design | Academic Competition
ACKNOWLEDGMENTS
Outstanding Student; GPA: 9,07
Facultad Nacional de Cuyo, Faculty of Engineering
Godoy Cruz Community Building
2nd Place: Design of Community Center for Razquín Neighborhood
LENGUAGE SKILLS
English
Level B2
Spanish Native
CONTACT
Arq.vargasmariaemilia@gmail.com
2616134326
Argentina
SOFTWARES
Autocad
Sketchup
D5 Render
Enscape
Twinmotion
Photoshop
Illustrator
Indesign
Revit
Rhinoceros
3DS Max
Filmora
Paquete Office
01| Beyond.
.Content.
Space Research Center. Pag. 6
02| Co & Co.
Coworking and Coliving. Pag. 24
.Content.
03| West Terraces Hospital Hospital.
Pag. 36
Selected Works 6
7 01 | Space research center
Location: Crater Marsursky, Marte.
Year: 2023
Category: Research Center.
As the final degree project, the creation of a research center on Mars was undertaken. The primary objective of this project was to meet all the physical and psychological needs required by six highly skilled astronauts over a period of two years. The implementation of this initiative not only provided us with the opportunity to explore new construction techniques but also allowed us to reflect on the way humans inhabit space.
Selected Works 8
Rhinoceros Autocad Sketchup D5 Render Photoshop
01 | Beyond.
9
Selected Works 10
11
Selected Works 12
Ground floor
13
Selected Works 14
The project is zoned into three main areas: one corresponding to the work sector, another designated for housing, and the gardening area which allows for connectivity between the previously mentioned areas.
15
Longitudinal Section B-B
Carpentry Skylight carpentry
Metallic structure
Extruded in 3D
Triple layer of ETFE sheeting
Thickness = 25mm with 0.15m air gap
Aerogel insulation
Thickness = 0.7m
Triple layer of ETFE sheeting
Thickness = 25mm with 0.15m air gap.
Metallic structure
Extruded in 3D
Triple layer of ETFE sheeting
Thickness = 25mm with 0.15m air gap
Aerogel insulation
Thickness = 0.9m
Triple layer of ETFE sheeting
Thickness = 25mm with 0.15m air gap.
External shell Foundation
Martian concrete
3D printed with thickness of 0.5m
Basalt fiber reinforcement
Air gap with thickness of 0.5m
Martian concrete
3D printed with thickness of 0.5m
basalt fiber reinforcement.
Martian concrete
3D printed with variable thickness
Basalt fiber reinforcements
Selected Works 16 Transversal Section C-C
17
Selected Works 18
19
Selected Works 20
Airlock External shell
Prefabricated metal structure module assembled on site.
Martian concrete 3D printed with a thickness of 0.5m
Basalt fiber reinforcement
Air gap with a thickness of 0.5m
Martian concrete 3D printed with a thickness of 0.5m
Basalt fiber reinforcement.
Hydraulic elevator Carpentry
Hydraulic elevator with metal structure and translucent polymer.
Metal structure extruded in 3D
ETFE sheeting with thickness of 25mm
Air gap with thickness of 0.2m
ETFE sheeting with thickness of 25mm. Section
21
detail
Selected Works 22
23
Final video
Selected Works 24
25 02 | Coworking and Coliving
02 | Co & Co
Location: Mantua, Lombardía, Italia
Year: 2021
Category: Coworking & Coliving
The project consists of a building for co-working and co-living activities. The proposal aims to create spacious and flexible spaces that allow for both work and living. It’s not just about a new way of living, but a whole lifestyle characterized by sharing spaces to foster a community. The materials used emulate those of ancient ports located along the river, and the outdoor space is enriched by the access to it.
Selected Works 26
Revit Lumion Photoshop
27
28 Site Plan
The selected vegetation is exclusively found in protected areas of the Lombardy region. The landscaping proposal complements the morphology, creating different wooded areas for enjoyment.
29
Carpentry
Curtain wall with a structure of grids, uprights, crossbars, pressure bars, covers, and laminated safety glass double-glazed (DVH) 5+5 with a thickness of 12 mm. Black sliding DVH aluminum. Laminated safety glass double-glazed (DVH) 5+5 with a thickness of 12 mm.
Roof Mezzanine Walls
Sinusoidal sheeting 1 m x 0.88 m x 2 cm
Rafters 2.4 cm x 2.4 cm spaced every 15 cm
Plywood with a thickness of 18 mm
Rafters 5” x 3”
Glass wool with aluminum thickness: 5 cm
Plywood with a thickness of 18 mm
Wooden coffering 1 m x 0.1 m
Metal gutter Prodacero “frieze”
Flat sheeting cornice nedra Lac no. 14 thickness: 2 cm 1 m x 2m.
Sinusoidal sheeting 1 m x 0.88 m x 2 cm
Rafters 2.4 cm x 2.4 cm spaced every 15 cm
Plywood with a thickness of 18 mm
Rafters 5” x 3”
Glass wool with aluminum thickness: 5 cm
Plywood with a thickness of 18 mm
Wooden coffering 1 m x 0.1 m
Metal gutter Prodacero “frieze”
Flat sheeting cornice nedra Lac no. 14 thickness: 2 cm 1 m x 2m.
CLT panel, Acer wood, thickness: 6 cm
Fiberglass insulation, thickness: 5 cm
CLT panel, Maple wood, thickness: 6 cm.
Selected Works 30
31
Selected Works 32 Interior | Coworking
fachada sur
33 mantua ARQ V - 2021 COWORKING&COLIVING GRUPO 2 fachada este Chapa sinusoidal 1 m x 0.88 m x 2 cm Alfajía 2.4 cm x 2.4 cm cada 15 cm Contrachapado e: 18 mm Alfajía 5” x 3” Lana de vidrio con aluminio e: 5 cm Contrachapado e: 18 mm Casetonado de madera 1 m x 0.1 m Canaleta metálica prodacero “friso” Cenefa chapa lisa nedra Lac no. 14 e: 2 cm 1 m x 2m CUBIERTA Piso vinílico sistema click 100% resistente al agua Piso flotante ISOLANT e: 2 cm Contrachapado e: 18 mm Alfajía 5” x 3” Contrachapado e: 18 mm Casetonado de madera de 1 m x 0.1 m Baranda de vidrio templado de seguridad Soporte tipo espiga BALCÓN Aluminio DVH corrediza negra Vidrio DVH laminado 5+5 e: 0.12 cm CARPINTERÍAS Entablonado de madera e: 1 cm Estructura metálica tubo 5 cm x 3 cm Aire Chapa sinusoidal 1 m x 0.85 m x 0.02 m Alfajía 3” x 2” Contrachapado e: 18 mm Lana de vidrio con aluminio e: 5 cm Contrachapado e: 18 mm Casetonado de madera 0.1 m x 1m CUBIERTA TRANSITABLE Cerramientos Panel CLT madera de acer e: 6 cm Fibra de vidrio e: 5 cm Panel CLT madera de arce e: 6 cm Lamas Pa: 5 cm x 10 cm Pb: 10 cm x 100 cm estructura bastidor metálico Panel CLT madera de arce Riel de aluminio Rodapié rodatecho Varilla roscada métrica 10 Junta de caucho Taquete de expansión Estructura Columnas de sección compuesta de madera maciza 0.50 m x 0.50 m CERRAMIENTOS Y ESTRUCTURA Microcemento alisado fullcover antiquiebre con juntas de dilatación cada 5 m SOLADO ARQ V - 2021 COWORKING&COLIVING GRUPO 2 fachada norte ESC. 1:100 Chapa sinusoidal 1 m x 0.88 m x 2 cm Alfajía 2.4 cm x 2.4 cm cada 15 cm Contrachapado e: 18 mm Alfajía 5” x 3” Lana de vidrio con aluminio e: 5 cm Contrachapado e: 18 mm Casetonado de madera 1 m x 0.1 m Canaleta metálica prodacero “friso” Cenefa chapa lisa nedra Lac no. 14 e: 2 cm 1 m x 2m CUBIERTA Piso vinílico sistema click 100% resistente al agua Piso flotante ISOLANT e: 2 cm Contrachapado e: 18 mm Alfajía 5” x 3” Contrachapado e: 18 mm Casetonado de madera de 1 m x 0.1 m Baranda de vidrio templado de seguridad Soporte tipo espiga BALCÓN Aluminio DVH corrediza negra Vidrio DVH laminado 5+5 e: 0.12 cm CARPINTERÍAS Entablonado de madera e: 1 cm Estructura metálica tubo 5 cm x 3 cm Aire Chapa sinusoidal 1 m x 0.85 m x 0.02 m Alfajía 3” x 2” Contrachapado e: 18 mm Lana de vidrio con aluminio e: 5 cm Contrachapado e: 18 mm Casetonado de madera 0.1 m x 1m CUBIERTA TRANSITABLE Cerramientos Panel CLT madera de acer e: 6 cm Fibra de vidrio e: 5 cm Panel CLT madera de arce e: 6 cm Lamas Pa: 5 cm x 10 cm Pb: 10 cm x 100 cm estructura bastidor metálico Panel CLT madera de arce Riel de aluminio Rodapié rodatecho Varilla roscada métrica 10 Junta de caucho Taquete de expansión Estructura Columnas de sección compuesta de madera maciza 0.50 m x 0.50 m CERRAMIENTOS Y ESTRUCTURA Plataforma deck sobre suelo absorbente SOLADO mantua ARQ V - 2021 COWORKING&COLIVING GRUPO 2
ESC. 1:100 Chapa sinusoidal 1 m x 0.88 m x 2 cm Alfajía 2.4 cm x 2.4 cm cada 15 cm Contrachapado e: 18 mm Alfajía 5” x 3” Lana de vidrio con aluminio e: 5 cm Contrachapado e: 18 mm Casetonado de madera 1 m x 0.1 m Canaleta metálica prodacero “friso” Cenefa chapa lisa nedra Lac no. 14 e: 2 cm 1 m x 2m CUBIERTA Piso vinílico sistema click 100% resistente al agua Piso flotante ISOLANT e: 2 cm Contrachapado e: 18 mm Alfajía 5” x 3” Contrachapado e: 18 mm Casetonado de madera de 1 m x 0.1 m Baranda de vidrio templado de seguridad Soporte tipo espiga BALCÓN Aluminio DVH corrediza negra Vidrio DVH laminado 5+5 e: 0.12 cm CARPINTERÍAS Entablonado de madera e: 1 cm Estructura metálica tubo 5 cm x 3 cm Aire Chapa sinusoidal 1 m x 0.85 m x 0.02 m Alfajía 3” x 2” Contrachapado e: 18 mm Lana de vidrio con aluminio e: 5 cm Contrachapado e: 18 mm Casetonado de madera 0.1 m x 1m CUBIERTA TRANSITABLE Cerramientos Panel CLT madera de acer e: 6 cm Fibra de vidrio e: 5 cm Panel CLT madera de arce e: 6 cm Lamas Pa: 5 cm x 10 cm Pb: 10 cm x 100 cm estructura bastidor metálico Panel CLT madera de arce Riel de aluminio Rodapié rodatecho Varilla roscada métrica 10 Junta de caucho Taquete de expansión Estructura Columnas de sección compuesta de madera maciza 0.50 m x 0.50 m CERRAMIENTOS Y ESTRUCTURA Microcemento alisado fullcover antiquiebre con juntas de dilatación cada 5 m SOLADO
South facade
North facade
East facade
Selected Works 34
35
Selected Works 36
37 03 | Hospital
01 | West Terraces Hospital
Location: Chacras de Coria, Mendoza, Argentina
Year: 2020
Category: Hospital
A hospital is a fundamental facility for life in society, presenting a symbolic value due to its scale and social representation. Each space responds to the proposed specializations in the program requirements. The entire system is configured through courtyards and light wells that bring life and dynamism to the building. Additionally, thanks to the layout and windows, solar gain is achieved for the coldest months of the year, and the eaves provide protection on hot days.
Selected Works 38
940m 941 931m 932 933m 934m Revit Lumion Photoshop Sketchup
39
Plan site
PRODUCED BY AN AUTODESK STUDENT VERSION
PRODUCED BY AN AUTODESK STUDENT VERSION
First Floor
41
RECEPCION INGRESO PRINCIPAL CLINICA LABORATORIO CONSULTORIOS GENERALES FARMACIA REHABILITACIÓN BANCO DE SANGRE IMAGENOLOGÍA DIÁLISIS ADMISIÓN URGENCIAS G 10 PROYECCIÓN ACIO PLANTA PROYECCIÓNVACIO PROYECCIÓN VACIO PROYECCIÓN VACIO PROYECCIÓN PATIO PROYECC PATIO ACCESIBLE PROYECCIÓNVACIO VACIO SOBRE PLANTA BAJA PATIO ACCESIBLE PROYECC VA +1,00 +2,00
PLANTA BAJA
AUTODESK STUDENT VERSION
PRODUCED BY AN
PRODUCED BY AN AUTODESK STUDENT VERSION
Landscape plan
Selected Works 42
43
Longitudinal Section
North facade
Trasversal section
West facade
Axonometry
References.
Selected Works 44
1- Foundation piles
2- Reinforced concrete slab
3- 60*60 columns
4- Gypsum boards
5- IPN 400 (I-beam)
6- Prestressed concrete beam
7- Steel Deck
8- Durlock partition
9- Uniflex board
10- Steel profile 100*20
11- Uniflex cement board
12- Smart Energy Glass
13- Aluminum carpentry
14- Curtain wall
45
