MEDIUM SEMI CUT-OFF WALL PACK OWP-SC-201
S H I P P I N G AVA I L A B L E
SUGGESTED USE - For commercial areas requiring wider beam spread needs. The semi-cut off feature provides some forward throw illumination while also restricting brightness and glare at wider angles. Such as docking areas, entrances, walkways and tunnels where light control and minimum spill of light is required. CONSTRUCTION - Die-cast aluminum housing with hinged door frame. The one piece silicone gasket effectively limits outside contaminants by sealing off the optical chamber. Specular anodized aluminum reflector provides proper cutoff distribution for IES standards. HID & HPS fixtures have porcelain 4KV pulse rated medium base socket with nickel-plated screw shell sockets. CFL fixtures have 4 pin plug in base & standard ballast of min. staring Temp. of 0oF/18oC, extreme Temp. ballast (XT) with -20oF/-30oC is available. FINISH - Dark bronze corrosion- resistant polyester powder finish is standard. LENS - Heat and impact resistant tempered glass lens designed to reduce glare and lamp image. INSTALLATION - Convenient, easy mount over standard 4” outlet box. Top, side and back 1/2” conduit entry taps. DISTRIBUTION - Type IV standard. For other distribution please consult factory. LISTINGS - UL/ C-UL for wet location. LAMP - Included except for CFL option. All specifications are subject to change without notice.
owp-sc-201-mh-175-mvolt 3
2
1
.1 .5
0
5
House Side
.2 1 10
2
Street Side
1
Dimensions:
1.75 2
12-1/2"
9-1/2"
2.75 3
4
0
1
2 2.25
3
3.75
4
5
6
Medium Semi Cut-Off Wall Pack
5
9"
7
(Distance In Units Of Mounting Height) (Values Based On 10 Foot Mounting Height) (1/2 Maximum Candela Trace Shown As Dashed Curve) (+) = Maximum Candela Point
ORDERING GUIDE
Example: owp-sc-201-mh-175-mvolt
OWP-SC-201 SERIES owp-sc-201
WATTAGE
VOLTAGE
OPTIONS
HPS, MH1,4
PC120 - Photo control (120V only)
(100W High Pressure Sodium)
mvolt(120/208/240/277)
PC277 - Photo control (277V only)
(150W High Pressure Sodium)
120
SF - Single fuse
MH-70
(70W Metal Halide)
3475
DF - Double fuse
MH-100
(100W Metal Halide)
4805
XT- -20 F/-30 C Min.Temp. Bal. (CFL only)
MH-150
(150W Metal Halide)
MH-175
(175W Metal Halide)
CFL-1X26
(1X26W Compact Fluorescent)
CFL2,3,4
CFL-1X32
(1X32W Compact Fluorescent)
mvolt(120/277)
CFL-1X42
(1X42W Compact Fluorescent)
120
CFL-2X26
(2X26W Compact Fluorescent)
208
CFL-2X32
(2X32W Compact Fluorescent)
240
CFL-2X42
(2X42W Compact Fluorescent)
347
hps-70
(70W High Pressure Sodium)
hps-100 hps-150
WWW. ORACLELIGHTING . COM
• TEL: 1 - 8 7 7 - 3 7 5 - 5 5 5 5
o
COLOR BZ - BRONZE
o
ACCESSORIES owp-sc-201-RL - Replacement lens kit
NOTES: 1. 2. 3. 4. 5.
Pulse Start standard on all fixtures above 175W. Lamps are not included for CFL. Please consult factory for dimming options. Consult factory for other wattages and options. 347 & 480 Volt not available on 50 & 70W fixture.
• FAX : 1 - 8 7 7 - 3 7 5 - 3 3 3 3
241