20
1. Base Geometry
2. Geodesics
3. 4 Layers of Laths
4. Pinning the Intersections
5. Differencing the Pins
6. Layout Cut sheets and Label
Top: Procedure for procuring the cut sheets from the base geometry. These are then lasercut and assembled with only mechanical fasteners. (SEE FOLLOWING SPREAD) Bottom Right: Base surfaces for iterative matrix. Only 1 of the 8 final surfaces are shown (SEE OPPOSITE) Bottom Left: Construction details for end condition and lath joint. Opposite: Matrix depicting iterations using different constraints that are input into the definition.