Bvmi nuclear bellows by Piter Jones

BVMI Process Engineering Office 5/6, 3rd Floor, The Saturn Center, Spring Road, Ettingshall, Wolverhampton, WV4 6JX, UK Tel: +44 (0)1902 404736 Fax: +44 (0)1902 403906 email: sales@bvmi.co.uk

Series 4 High Temperature Bellows Sealed Valve Class 600 Bellows Sealed Globe Valve, Conventional Bore, Outside Screw and Yoke, Non-rising Handwheel, Bolted Bonnet. Available with Integral Hard Faced Seat or Screwed in Stainless Steel Seat Valve can be supplied with Actuator - Electric or Pneumatic. Buttweld end connections shown, also available as screwed, socket weld, Flanged or special connection. ASME III option available. Straight Pattern shown, also available as Angle pattern and Oblique pattern. Maximum Pressure / Temperature ratings are restricted by the valve end connections and the body / bonnet materials. Shown are the maximum ratings for socket weld, buttweld and screwed. Materials can be changed to customer specifications. There are temperature restrictions on some materials, ie. C.St. ASTM A105 is not recommended for use above 425ยบC. If in doubt please ask, we will advise suitable materials for the temperature, pressure and media. Dimensions Valve Size Dim DN A mm DN8 108 DN15 108 DN20 117 DN25 127 DN40 165 DN50 203

Dim B mm 241 241 241 254 368 400

Dim C mm 100 100 100 100 150 150

Weight Kg 9 9 9 9.6 24 25

Cv IGPM 1.7 2.45 2.45 5.8 12.4 18.5

Material Specification Body Bonnet Seat Disk Stem Bellows Back up Gland Yoke Bush

09.18.14

Stainless Steel Valve St.St. ASTM A182 F316H St.St. ASTM A182 F316H Integral Hard Faced St. St. - Hard Faced St.St. ASTM A182 F316H Incolloy 800H or 800HT Exfoliated Graphite Aluminium Bronze

Page 1 of 18

Service Service Temperature Pressure ยบC bar g 38 103.4 50 101.6 100 94.2 200 79.6 300 70.6 400 65.7 500 63.4 600 49.8 700 22.8 800 8.8 816 7.2

BVMI Process Engineering Office 5/6, 3rd Floor, The Saturn Centre, Spring Road, Ettingshall, Wolverhampton, WV4 6JX, UK Tel: +44 (0) 1902 404736 Fax: +44 (0) 1902 403906 email: sales@bvmi.co.uk

Series 34A Bolted Bonnet Valve - Straight Pattern Class 800/900/1500 bellows sealed globe valve to BS5352, standard bore, outside screw and yoke, non-rising handwheel, bolted bonnet. Available with integral hard faced seat or screwed in stainless steel seat. Valve can be supplied with actuator - electric or pneumatic. Butt weld end connections shown, also available as screwed, socket weld, flanged or special connection. Service Temperature oC -38 to +38 50 100 150 200 250 300 350 400 450 500

Nuclear versions to ASME III available. Maximum pressure / temperature ratings are restricted by the valve end connections and the body / bonnet materials. Shown are the maximum ratings for socket weld, butt weld and screwed ends to BS5352. Materials can be changed to customer specifications. There are temperature restrictions on some materials, ie. C.St. ASTM A105 is not recommended for use above 425 oC. If in doubt please ask, we will advise suitable materials for the temperature, pressure and media.

Service Pressure Bar g 99 98 96 94 91 87 79 71 63 55 34

Dimensions (typical) Class 800

Class 900/1500

Valve Size DN

Dim A mm

Dim B mm

Dim C mm

Weight Kg

DN6 DN15 DN20 DN25 DN40 DN50

108 108 117 127 165 203

241 241 241 254 368 400

100 100 100 100 150 150

9 9 9 9.6 24 25

Component Body Bonnet Seat Disk Stem Bellows Back up Gland Yoke Bush

09.18.14

Cv UK Gal/min 1.7 2.45 2.45 5.8 12.4 18.5

Material Carbon Steel Valve Stainless Steel Valve C.St. ASTM A105 St.St. Type 316L C.St. ASTM A105 St.St. Type 316L St.St. Type 410 or St.St. Type 410 or integral Stellite HF integral Stellite HF St.St. Type 410 or St.St. Type 410 or Stellite HF Stellite HF St.St. Type 316L St.St. Type 316L St.St. Type 316L St.St. Type 316L Exfoliated graphite Exfoliated graphite Aluminium bronze Aluminium bronze

Page 2 of 18

Dim A mm

Dim B mm

Dim C mm

Weight Kg

216 216 229 254 305 368

321 321 321 384 458 530

150 150 150 150 200 290

12 12 12 15 30 35

Cv UK Gal/min 1.7 2.45 2.45 5.8 12.4 18.5

BVMI Process Engineering Office 5/6, 3rd Floor, The Saturn Centre, Spring Road, Ettingshall, Wolverhampton, WV4 6JX, UK Tel: +44 (0) 1902 404736 Fax: +44 (0) 1902 403906 email: sales@bvmi.co.uk

Series 34B Bolted Bonnet Valve - Oblique Pattern Class 600/900/1500 bellows sealed globe valve, standard bore, outside screw and yoke, non-rising handwheel, bolted bonnet. To BSEN15761 or nuclear class to ASME III available. Valve can be supplied with actuation - electric or pneumatic plus controls. Extended spindles also available. Butt weld end connections shown, also available as screwed, socket weld, flanged or special connection or manifold blocks. Cartridge valve, version also available - seat and all seals are removed with the top assembly. This leaves only the body left in line. Maintenance time reduced significantly. Increases safety, no danger of seals being lost down line or seat not being fitted.

Maximum pressure / temperature ratings are restricted by the valve end connections and the body / bonnet materials. Valve design suitable for temperatures up to 320 oC. Materials can be changed to customer specifications.

Size DN 6 15 20 25 40 50 80 100 150

Dim A mm 229 229 229 254 305 368 381 457 610

Dimensions Dim B Weight mm Kg 242 13 242 13 245 13 260 15.5 350 35 420 40 540 250 562 295 820 320

Cv UKGPM 2 5.8 5.8 11 30 54 153 267 690

Materials Component Body Bonnet Seat Seat Seal Disk Stem Bellows Back up Gland

09.18.14

Material St.St. BSEN 10222-5 x2 CrNi 18-9 (1.4307) / ASME SA182 F304L St.St. BSEN 10222-5 x2 CrNi 18-9 (1.4307) / ASME SA182 F304L St.St. BSEN 10088-3 1.4307 / ASME SA479 304L / HF Stainless steel / Graphite St.St. BSEN 10088-3 1.4307 / ASME SA479 304L / HF St.St. BSEN 10088-3 1.4307 / ASME SA479 304L St.St. Type 316L Graphite

Page 3 of 18

BVMI Process Engineering Office 5/6, 3rd Floor, The Saturn Centre, Spring Road, Ettingshall, Wolverhampton, WV4 6JX, UK Tel: +44 (0) 1902 404736 Fax: +44 (0) 1902 403906 email: sales@bvmi.co.uk

Series 34C Bolted Bonnet Valve - Angle Pattern Class 800/900/1500 bellows sealed globe valve to BS5352, standard bore, outside screw and yoke, non-rising handwheel, bolted bonnet. Available with integral hard faced seat or screwed in stainless steel seat. Valve can be supplied with actuator - electric or pneumatic. Butt weld end connections shown, also available as screwed, socket weld, flanged or special connection. Nuclear versions to ASME III available. Maximum pressure / temperature ratings are restricted by the valve end connections and the body / bonnet materials. Materials can be changed to customer specifications. There are temperature restrictions on some materials, ie. C.St. ASTM A105 is not recommended for use above 425 oC. If in doubt please ask, we will advise suitable materials for the temperature, pressure and media.

Dimensions (typical) Class 800

Class 900/1500

Valve Size DN

Dim A mm

Dim B mm

Dim C mm

Weight Kg

DN6 DN15 DN20 DN25 DN40 DN50

57 57 64 70 83 102

241 241 241 254 368 400

100 100 100 100 150 150

9 9 9 9.6 24 25

Component Body Bonnet Seat Disk Stem Bellows Back up Gland Yoke Bush

09.18.14

Cv UK Gal/min 2.7 3.9 3.9 9.2 19.8 29.6

Page 4 of 18

Dim A mm

Dim B mm

Dim C mm

Weight Kg

108 108 114 127 152 184

321 321 321 384 458 530

150 150 150 150 200 290

12 12 12 15 30 35

Cv UK Gal/min 2.7 3.9 3.9 9.2 19.8 29.6

BVMI Process Engineering Office 5/6, 3rd Floor, The Saturn Centre, Spring Road, Ettingshall, Wolverhampton, WV4 6JX, UK Tel: +44 (0) 1902 404736 Fax: +44 (0) 1902 403906 email: sales@bvmi.co.uk

Series 35A Seal Welded Bonnet Valve - Straight Pattern Seal Welded Bonnet Valve - Straight Pattern. Standard Bore, Outside Screw and Yoke, Non-rising handwheel, Seal Welded Bonnet. To ANSI B16.34 or Nuclear Class to ASME III Available with Integral Hard Faced (Stellite 6 or Colomonoy 5) Seat or Screwed in Stainless Steel Seat Valve can be supplied with Actuator - Electric or Pneumatic. Buttweld end connections shown, also available as screwed, socket weld, flanged or special connection Maximum Pressure / Temperature ratings are restricted by the valve end connections and the body / bonnet materials. Materials can be changed to customer specifications. There are temperature restrictions on some materials, ie. C.St. ASTM A105 is not recommended for use above 425ยบC. If in doubt please ask, we will advise suitable materials for the temperature, pressure and media. DN65/DN80/DN100 normally cast body and bonnet. Forged available. Dimensions (typical) Class 150/300/600

Class 900/1500

Valve Size DN

Dim A mm

Dim B mm

Dim C mm

Weight Kg

DN6 DN15 DN20 DN25 DN40 DN50 DN65 DN80 DN100

165 165 190 216 241 292 330 356 432

243 243 243 256 368 400 450 500 521

100 100 100 125 150 200 300 300 300

16 16 16 20 33 39 220 260 350

Body & Bonnet Seat Disk Stem Bellows Gland Bush

Cv UK Gal/min 1.0 1.8 4.0 6.9 17.4 31.0 46.0 70.0 128.0

Dim A mm

Dim B mm

Dim C mm

Weight Kg

216 216 229 254 305 368 419 381/470 457/546

261 261 261 294 398 440 500 560 590

150 150 150 150 200 250 300 300 300

12 12 12 14 28 30 180 200 290

Material Specification Carbon Steel Valve Stainless Steel Valve C.St. ASME SA350 LF2 or St.St. ASME SA182 F316L or C.St. ASME SA352 LCB St.St. ASME SA351 CF3M Integral Hard Facing Integral Hard Facing St.St. Type 316L with Hard Facing St.St. Type 316L with Hard Facing St. St. ASME SA564 630 H1075 St. St. ASME SA564 630 H1075 Inconel 600/625 Inconel 600/625 Exfoliated Graphite Exfoliated Graphite Aluminium Bronze Aluminium Bronze

Dimensions are subject to confirmation. Drawings with confirmed dimensions can be supplied at time of order.

09.18.14

Page 5 of 18

Cv UK Gal/min 1.0 1.6 2.9 5.0 14.5 23.0 37.0 62.0 113.0

BVMI Process Engineering Office 5/6, 3rd Floor, The Saturn Centre, Spring Road, Ettingshall, Wolverhampton, WV4 6JX, UK Tel: +44 (0) 1902 404736 Fax: +44 (0) 1902 403906 email: sales@bvmi.co.uk

Series 35B Seal Welded Bonnet Valve - Oblique Pattern Seal Welded Bonnet Valve - Oblique Pattern. Standard Bore, Outside Screw and Yoke, Non-rising handwheel, Seal Welded Bonnet. Available with Integral Hard Faced Seat to offer increased resistance against corrosion. Valve can be supplied with Actuator - Electric or Pneumatic. Buttweld end connections shown, also available as screwed, socket weld, flanged or special connection Maximum Pressure / Temperature ratings are restricted by the valve end connections and the body / bonnet materials. Shown are the maximum ratings for socket weld, butt weld and screwed ends to BS5352.

Dimensions (typical) Class 800 Valve Size DN

Dim A mm

Dim B mm

Dim C mm

Weight Kg

DN8 DN15 DN20 DN25 DN40 DN50

154 154 154 154 224 274

210 210 210 210 325 325

95 95 95 95 165 130

9 10 11 11 24 25

Cv UK Gal/min 4.4 4.4 4.4 9.1 27.5 40

Body & Bonnet Seat Disk Stem Bellows Gland Bush

09.18.14

C.St. ASTM A105

St.St. BS1503 304S11

St.St. Type 410 or Integral Stellite Hard Facing St.St. Type 410 or Stellite Hard Facing St. St. Type 304 St. St. Type 304 Exfoliated Graphite Aluminium Bronze

Page 6 of 18

Pressure Bar g 99 98 96 94 91 87 79 71 63 55 34

Materials can be changed to customer specifications. There are temperature restrictions on some materials, ie. C.St. ASTM A105 is not recommended for use above 425ยบC. If in doubt please ask, we will advise suitable materials for the temperature, pressure and media.

Dimensions are subject to confirmation. Drawings with confirmed dimensions can be supplied at time of order. Material Specification Carbon Steel Valve Stainless Steel Valve

Temperature oC -30 to 38 50 100 150 200 250 300 350 400 450 500

BVMI Process Engineering Office 5/6, 3rd Floor, The Saturn Centre, Spring Road, Ettingshall, Wolverhampton, WV4 6JX, UK Tel: +44 (0) 1902 404736 Fax: +44 (0) 1902 403906 email: sales@bvmi.co.uk

Series 35C Seal Welded Bonnet Valve - Angle Pattern Seal Welded Bonnet Valve - Angle Pattern. Standard Bore, Outside Screw and Yoke, Non-rising handwheel, Seal Welded Bonnet. To ANSI B16.34 or Nuclear Class to ASME III Available with Integral Hard Faced (Stellite 6 or Colomonoy 5) Seat or Screwed in Stainless Steel Seat Valve can be supplied with Actuator - Electric or Pneumatic. Buttweld end connections shown, also available as screwed, socket weld, flanged or special connection Maximum Pressure / Temperature ratings are restricted by the valve end connections and the body / bonnet materials. Materials can be changed to customer specifications. There are temperature restrictions on some materials, ie. C.St. ASTM A105 is not recommended for use above 425ยบC. If in doubt please ask, we will advise suitable materials for the temperature, pressure and media. DN65/DN80/DN100 normally cast body and bonnet. Forged available. Dimensions (typical) Class 150/300/600

Class 900/1500

Valve Size DN

Dim A mm

Dim B mm

Dim C mm

Weight Kg

DN6 DN15 DN20 DN25 DN40 DN50 DN65 DN80 DN100

57 57 64 70 83 102 108 121 146

243 243 243 256 368 400 450 500 521

100 100 100 125 150 200 300 300 300

16 16 16 20 33 39 220 260 350

Body & Bonnet Seat Disk Stem Bellows Gland Bush

Cv UK Gal/min 2.7 3.9 3.9 9.2 19.8 29.6 73 110 204

Dim A mm

Dim B mm

Dim C mm

Weight Kg

108 108 114 127 152 184 210 235 273

261 261 261 294 398 440 500 560 590

150 150 150 150 200 250 300 300 300

12 12 12 14 28 30 180 200 290

Dimensions are subject to confirmation. Drawings with confirmed dimensions can be supplied at time of order.

09.18.14

Page 7 of 18

Cv UK Gal/min 2.7 3.9 3.9 9.2 19.8 29.6 60 100 180

BVMI Process Engineering Office 5/6, 3rd Floor, The Saturn Centre, Spring Road, Ettingshall, Wolverhampton, WV4 6JX, UK Tel: +44 (0) 1902 404736 Fax: +44 (0) 1902 403906 email: sales@bvmi.co.uk

Series 36A Bolted/Edge Welded Bonnet Valve - Straight Pattern Class 900/1500 bellows sealed globe valve, standard bore, outside screw and yoke, bolted and lip-seal welded bonnet. ASME III option available. Secondary gland in the event of bellows failure. Available with integral hard faced seat to offer increased resistance against erosion Valve can be supplied with manual operation or actuated - electric or pneumatic. Manual valve and electrically actuated valve shown.

Class 900 Manually Operated

Component

Electrically Operated

Size

Dim A

Dim B

Weight

Dim D

Dim E

Weight

UKGPM

Please ask for details

1.0 1.8 4.0 6.9 17.4 31.0 46.0 70.0 128.0

6 15 20 25 40 50 65 80 100

216 216 229 254

320 320 320 320

13.8 13.8 13.8 13.8

520 520 520 520

216 216 229 254

305 368 419 381 457

382 406 406 548 579

24.1 46.8 46.8 97.7 183

570 595 595 730 755

305 368 419 381 457

Body Bonnet

Seat

Disk

Stem Bellows

Class 1500 Manually Operated

09.18.14

Size

Dim A

Dim B

Weight

6 15 20 25 40 50 65 80 100

216 216 229 254

305 305 305 311

305 368 419 381 457

345 371 400 508 577

28.1 76.2 80.3 137 231

Electrically Operated Dim D

Dim E

Weight

UKGPM

17.2 17.2 18.6 19.5

TBA TBA TBA TBA

216 216 229 254

TBA TBA TBA TBA TBA

305 368 419 381 457

Please ask for details

1.0 1.6 2.9 5.0 14.5 23.0 37.0 62.0 113.0

Page 8 of 18

Back up Gland Yoke Bush

Material 316 Stainless 304 Stainless Steel Steel St.St. ASME St.St. ASME SA182 F316 SA182 F304 St.St. ASME St.St. ASME SA182 F316 SA182 F304 St.St. ASME St.St. ASME SA479 316 or SA479 304 or integral Stellite integral Stellite hard faced hard faced St.St. ASME St.St. ASME SA479 316 or SA479 304 or St.St. Type 316 St.St. Type 304 hard faced hard faced St.St. ASME St.St. ASME SA479 316 SA479 304 St.St. Type St.St. Type 316/316L 316/316L Exfoliated Exfoliated graphite graphite Aluminium Aluminium bronze bronze

Valve shown is with a leak detection port, to provide early warning of any bellows failure. Extended spindles, type and length are designed to suit customer requirements. Weights shown are without extended spindle. Pneumatically actuated valves are available.

BVMI Process Engineering Office 5/6, 3rd Floor, The Saturn Centre, Spring Road, Ettingshall, Wolverhampton, WV4 6JX, UK Tel: +44 (0) 1902 404736 Fax: +44 (0) 1902 403906 email: sales@bvmi.co.uk

Series 36B Bolted/Edge Welded Bonnet Valve - Oblique Pattern Class 900/1500 bellows sealed globe valve, standard bore, outside screw and yoke, bolted and lip-seal welded bonnet. ASME III option available. Secondary gland in the event of bellows failure. Available with integral hard faced seat to offer increased resistance against erosion Valve can be supplied with manual operation or actuated - electric or pneumatic. Manual valve and electrically actuated valve shown.

Class 900 Manually Operated

Component

Electrically Operated

Size

Dim A

Dim B

Weight

Dim D

Dim E

Weight

UKGPM

6 15 20 25 40 50 65 80 100

288 288 288 288 323 407 407 437 427

245 245 245 245 293 311 311 420 443

13.8 13.8 13.8 13.8 24.1 46.8 46.8 97.7 183

551 551 551 551 585 605 605 742 775

288 288 288 288 323 407 407 437 427

Please ask for details

7 7 12.9 20.8 39 92 125 213 260

Body Bonnet

Seat

Disk

Stem Class 1500 Manually Operated Size

Dim A

Dim B

6 15 20 25 40 50 65 80 100

323 323 323 407 407 437 437 508 508

305 305 305 311 345 371 400 508 577

09.18.14

Weight

Bellows

Electrically Operated Dim D

Dim E

Weight

UKGPM

17.2 17.2 18.6 19.5 28.1 76.2 80.3 137 231

TBA TBA TBA TBA TBA TBA TBA TBA TBA

323 323 323 407 407 437 437 508 508

Please ask for details

7 7 12.9 20.8 39 92 125 213 260

Page 9 of 18

Back up Gland Yoke Bush

BVMI Process Engineering Office 5/6, 3rd Floor, The Saturn Centre, Spring Road, Ettingshall, Wolverhampton, WV4 6JX, UK Tel: +44 (0) 1902 404736 Fax: +44 (0) 1902 403906 email: sales@bvmi.co.uk

Series 36C Bolted/Edge Welded Bonnet Valve - Angle Pattern Class 900/1500 bellows sealed globe valve, standard bore, outside screw and yoke, bolted and lip-seal welded bonnet. ASME III option available. Secondary gland in the event of bellows failure. Available with integral hard faced seat to offer increased resistance against erosion Valve can be supplied with manual operation or actuated - electric or pneumatic. Manual valve and electrically actuated valve shown.

Class 900 Manually Operated

Component

Electrically Operated

Size

Dim A

Dim B

Weight

Dim D

Dim E

Weight

UKGPM

6 15 20 25 40 50 65 80 100

108 108 114 127 152 184 210 190 229

320 320 320 320 382 406 406 548 579

13.8 13.8 13.8 13.8 24.1 46.8 46.8 97.7 183

520 520 520 520 570 595 595 730 755

108 108 114 127 152 184 210 190 229

Please ask for details

7 7 12.9 20.8 39 92 125 213 260

Body Bonnet

Seat

Disk

Stem Class 1500 Manually Operated

Bellows

Electrically Operated

Size

Dim A

Dim B

Weight

Dim D

Dim E

Weight

UKGPM

6 15 20 25 40 50 65 80 100

108 108 114 127 152 184 210 235 273

305 305 305 311 345 371 400 508 577

17.2 17.2 18.6 19.5 28.1 76.2 80.3 137 231

TBA TBA TBA TBA TBA TBA TBA TBA TBA

108 108 114 127 152 184 210 235 273

Please ask for details

7 7 12.9 20.8 39 92 125 213 260

09.18.14

Page 10 of 18

Back up Gland Yoke Bush

BVMI Process Engineering Office 5/6, 3rd Floor, The Saturn Centre, Spring Road, Ettingshall, Wolverhampton, WV4 6JX, UK Tel: +44 (0) 1902 404736 Fax: +44 (0) 1902 403906 email: sales@bvmi.co.uk

Series 40A Bolted Bonnet Cartridge Valve - Straight Pattern Class 600 bellows sealed globe valve, standard bore, outside screw and yoke, non-rising handwheel, bolted bonnet. To BSEN15761 or nuclear class to ASME III available. Valve can be supplied with actuation - electric or pneumatic plus controls. Extended spindles also available. Butt weld end connections shown, also available as screwed, socket weld, flanged or special connection or manifold blocks. Cartridge valve, seat and all seals are removed with the top assembly. This leaves only the body left in line. Maintenance time reduced significantly. Increases safety, no danger of seals being lost down line or seat not being fitted.

Size DN 6 15 20 25 40 50 80 100 150

Dim A mm 108 108 117 127 165 203 356 406 559

Component Body Bonnet Seat Seat Seal Disk Stem Bellows Back up Gland

09.18.14

Dimensions Dim B Weight mm Kg 243 9 243 9 243 9 256 9.6 368 24 400 25 500 202 521 240 780 278

Cv UKGPM 1.7 2.45 2.45 5.8 12.4 18.5 37 76 260

Material St.St. BSEN 10222-5 x2 CrNi 18-9 (1.4307) / ASME SA182 F304L St.St. BSEN 10222-5 x2 CrNi 18-9 (1.4307) / ASME SA182 F304L St.St. BSEN 10088-3 1.4307 / ASME SA479 304L Perlast or Kalrez seal St.St. BSEN 10088-3 1.4307 / ASME SA479 304L St.St. BSEN 10088-3 1.4307 St.St. Type 316L Graphite

Page 11 of 18

BVMI Process Engineering Office 5/6, 3rd Floor, The Saturn Centre, Spring Road, Ettingshall, Wolverhampton, WV4 6JX, UK Tel: +44 (0) 1902 404736 Fax: +44 (0) 1902 403906 email: sales@bvmi.co.uk

Series 40B Bolted Bonnet Cartridge Valve - Oblique Pattern Bellows sealed globe valve, standard bore, outside screw and yoke, non-rising handwheel, bolted bonnet. To BSEN15761 or nuclear class to ASME III available. Valve can be supplied with actuation - electric or pneumatic plus controls. Extended spindles also available. Butt weld end connections shown, also available as screwed, socket weld, flanged or special connection or manifold blocks. Cartridge valve, seat and all seals are removed with the top assembly. This leaves only the body left in line. Maintenance time reduced significantly. Increases safety, no danger of seals being lost down line or seat not being fitted. Maximum pressure / temperature ratings are restricted by the valve end connections and the body / bonnet materials. Valve design suitable for temperatures up to 320 oC. Materials can be changed to customer specifications. Dimensions (typical) Class 600 Valve Size

Dim A mm

Dim B mm

Weight Kg

DN6 DN15 DN20 DN25 DN40 DN50 DN80 DN100 DN150

165 165 190 216 241 292 356 432 559

220 220 220 230 320 390 490 502 760

11 11 11 12.5 30 35 230 270 298

Component Body & Bonnet Seat Seat Seal Disk Stem Bellows Gland

09.18.14

Class 1500 Cv UK Gal/min 2 5.8 5.8 11 30 54 153 267 690

Dim A mm

Dim B mm

Weight Kg

229 229 229 254 305 368 381 457 610

242 242 245 260 350 420 540 562 820

13 13 13 15.5 35 40 250 295 320

Material St.St. BSEN 10222-5 x2 CrNi 18-9 (1.4307) / ASME SA182 F304L St.St. BSEN 10088-3 1.4307 / ASME SA479 304L Perlast or Kalrez seal St.St. BSEN 10088-3 1.4307 / ASME SA479 304L St.St. BSEN 10088-3 1.4307 / ASME SA479 304L St.St. Type 316L Graphite

Page 12 of 18

Cv UK Gal/min 2 5.8 5.8 11 30 54 153 267 690

BVMI Process Engineering Office 5/6, 3rd Floor, The Saturn Centre, Spring Road, Ettingshall, Wolverhampton, WV4 6JX, UK Tel: +44 (0) 1902 404736 Fax: +44 (0) 1902 403906 email: sales@bvmi.co.uk

Series 40C Bolted Bonnet Cartridge Valve - Angle Pattern

Bellows Sealed Angle Pattern Globe Valve, standard bore, outside screw and yoke, non-rising handwheel, bolted bonnet. To BSEN15761 or nuclear class to ASME III available. Valve can be supplied with actuation - electric or pneumatic plus controls. Extended spindles also available. Butt weld end connections shown, also available as screwed, socket weld, flanged or special connection or manifold blocks. Cartridge valve, seat and all seals are removed with the top assembly. This leaves only the body left in line. Maintenance time reduced significantly. Increases safety, no danger of seals being lost down line or seat not being fitted. Maximum pressure / temperature ratings are restricted by the valve end connections and the body / bonnet materials. Valve design suitable for temperatures up to 320 oC. Materials can be changed to customer specifications.

Size DN 8 15 20 25 40 50 80 100 150

Component Body Bonnet Seat Seat Seal Disk Stem Bellows Back up Gland

09.18.14

Dim A mm 45 57 64 70 83 102 178 203 279

Dim B mm 200 218 230 230 235 255 482 502 770

Dimensions Dim C mm 32 32 32 32 43 51 104 114 139

Dim D mm 101 101 101 127 155 155 254 254 450

Dim E mm 102 102 102 102 128 165 220 240 278

Weight Kg 8 12 12 12 21 26 202 275 355

Page 13 of 18

BVMI Process Engineering Office 5/6, 3rd Floor, The Saturn Centre, Spring Road, Ettingshall, Wolverhampton, WV4 6JX, UK Tel: +44 (0) 1902 404736 Fax: +44 (0) 1902 403906 email: sales@bvmi.co.uk

Series 50A Non-Bellows Sealed Valve - Straight Pattern Globe Straight Pattern Globe Class 800 gland sealed globe valve to BS5352, standard bore, outside screw and yoke, non-rising handwheel, bolted bonnet. Available with integral hard faced seat or screwed in stainless steel seat. Valve can be supplied with actuator - electric or pneumatic. Butt weld end connections shown, also available as screwed, socket weld, flanged or special connection. Nuclear versions to ASME III available. Maximum pressure / temperature ratings are restricted by the valve end connections and the body / bonnet materials. Materials can be changed to customer specifications. There are temperature restrictions on some materials, ie. C.St. ASTM A105 is not recommended for use above 425 oC. If in doubt please ask, we will advise suitable materials for the temperature, pressure and media.

Size DN 6 15 20 25 40 50

Dim A mm 108 108 117 127 165 203

Component Body Bonnet Seat Disk Stem Back up Gland Yoke Bush

09.18.14

Dimensions Dim B Dim C mm mm 241 100 241 100 241 100 254 100 368 150 400 150

Weight Kg 9 9 9 9.6 24 25

Cv UKGPM 1.7 2.45 2.45 5.8 12.4 18.5

Material Carbon Steel Valve Stainless Steel Valve C.St. ASTM A105 St.St. Type 316L C.St. ASTM A105 St.St. Type 316L St.St. Type 410 or St.St. Type 410 or integral Stellite HF integral Stellite HF St.St. Type 410 or St.St. Type 410 or Stellite HF Stellite HF St.St. Type 316L St.St. Type 316L Exfoliated graphite Exfoliated graphite Aluminium bronze Aluminium bronze

Page 14 of 18

BVMI Process Engineering Office 5/6, 3rd Floor, The Saturn Centre, Spring Road, Ettingshall, Wolverhampton, WV4 6JX, UK Tel: +44 (0) 1902 404736 Fax: +44 (0) 1902 403906 email: sales@bvmi.co.uk

Series 50B Bolted Bonnet Valve - Oblique Pattern Class 600/900/1500 gland sealed globe valve, standard bore, outside screw and yoke, non-rising handwheel, bolted bonnet. To BSEN15761 or nuclear class to ASME III available. Valve can be supplied with actuation - electric or pneumatic plus controls. Extended spindles also available. Butt weld end connections shown, also available as screwed, socket weld, flanged or special connection or manifold blocks. Cartridge valve, version also available - seat and all seals are removed with the top assembly. This leaves only the body left in line. Maintenance time reduced significantly. Increases safety, no danger of seals being lost down line or seat not being fitted.

Maximum pressure / temperature ratings are restricted by the valve end connections and the body / bonnet materials.. Materials can be changed to customer specifications.

Size DN 6 15 20 25 40 50 80 100 150

Dim A mm 229 229 229 254 305 368 381 457 610

Dimensions Dim B Weight mm Kg 242 13 242 13 245 13 260 15.5 350 35 420 40 540 250 562 295 820 320

Cv UKGPM 2 5.8 5.8 11 30 54 153 267 690

Materials Component Body Bonnet Seat Seat Seal Disk Stem Back up Gland

09.18.14

Page 15 of 18

BVMI Process Engineering Office 5/6, 3rd Floor, The Saturn Centre, Spring Road, Ettingshall, Wolverhampton, WV4 6JX, UK Tel: +44 (0) 1902 404736 Fax: +44 (0) 1902 403906 email: sales@bvmi.co.uk

Series 50C Non-Bellows Sealed Valve - Angle Pattern Globe Angle Pattern Globe Class 800 gland sealed globe valve to BS5352, standard bore, outside screw and yoke, non-rising handwheel, bolted bonnet. Available with integral hard faced seat or screwed in stainless steel seat. Valve can be supplied with actuator - electric or pneumatic. Butt weld end connections shown, also available as screwed, socket weld, flanged or special connection. Nuclear versions to ASME III available. Maximum pressure / temperature ratings are restricted by the valve end connections and the body / bonnet materials. Materials can be changed to customer specifications. There are temperature restrictions on some materials, ie. C.St. ASTM A105 is not recommended for use above 425 oC. If in doubt please ask, we will advise suitable materials for the temperature, pressure and media.

Size DN 6 15 20 25 40 50

Dim A mm

57 57 64 70 83 102

Component Body Bonnet Seat Disk Stem Back up Gland Yoke Bush

09.18.14

Dimensions Dim B Dim C mm mm 241 100 241 100 241 100 254 100 368 150 400 150

Weight Kg 9 9 9 9.6 24 25

Cv UKGPM

2.7 3.9 3.9 9.2 19.8 29.6

Material Carbon Steel Valve Stainless Steel Valve C.St. ASTM A105 St.St. Type 316L C.St. ASTM A105 St.St. Type 316L St.St. Type 410 or St.St. Type 410 or integral Stellite HF integral Stellite HF St.St. Type 410 or St.St. Type 410 or Stellite HF Stellite HF St.St. Type 316L St.St. Type 316L Exfoliated graphite Exfoliated graphite Aluminium bronze Aluminium bronze

Page 16 of 18

BVMI Process Engineering Office 5/6, 3rd Floor, The Saturn Centre, Spring Road, Ettingshall, Wolverhampton, WV4 6JX, UK Tel: +44 (0) 1902 404736 Fax: +44 (0) 1902 403906 email: sales@bvmi.co.uk

Series 50D Non-Bellows Sealed Valve - Straight Pattern Non-Return Class 800 non-return valve to BS5352, standard bore, bolted bonnet. Available with integral hard faced seat or screwed in stainless steel seat. Butt weld end connections shown, also available as screwed, socket weld, flanged or special connection.

Size DN 6 15 20 25 40 50

Dim A mm 108 108 117 127 165 203

Dimensions Dim B Weight mm Kg 170 3 170 3 190 3 190 4.5 220 12 400 15

Cv UKGPM 1.7 2.45 2.45 5.8 12.4 18.5

Maximum pressure / temperature ratings are restricted by the valve end connections and the body / bonnet materials. Shown are the maximum ratings for socket weld, butt weld and screwed ends to BS5352. Materials can be changed to customer specifications. There are temperature restrictions on some materials, ie. C.St. ASTM A105 is not recommended for use above 425 oC. If in doubt please ask, we will advise suitable materials for the temperature, pressure and media. Component Body Bonnet Seat Disk

09.18.14

Material Carbon Steel Valve Stainless Steel Valve C.St. ASTM A105 St.St. BS1503 304S11 C.St. ASTM A105 St.St. BS1503 304S11 St.St. Type 410 or St.St. Type 410 or integral Stellite HF integral Stellite HF St.St. Type 410 or St.St. Type 410 or Stellite HF Stellite HF

Page 17 of 18

Service Temperature oC -38 to +38 50 100 150 200 250 300 350 400 450 500

Service Pressure Bar g 99 98 96 94 91 87 79 71 63 55 34

BVMI Process Engineering Office 5/6, 3rd Floor, The Saturn Centre, Spring Road, Ettingshall, Wolverhampton, WV4 6JX, UK Tel: +44 (0) 1902 404736 Fax: +44 (0) 1902 403906 email: sales@bvmi.co.uk

Series 55A Instrument Valve - Straight Pattern Class 600 bellows sealed globe valve, standard bore, outside screw and yoke, non-rising handwheel, union bonnet Available with integral seat or screwed in stainless steel seat or soft seated with O ring in disk Valve can be supplied with pneumatic actuator Butt weld end connections shown, also available as screwed, socket weld, flanged or any special connection.

Maximum pressure / temperature ratings are restricted by the valve end connections and the body / bonnet materials. Materials can be changed to customer specifications. There are temperature restrictions on some materials, ie. C.st. ASTM A105 is not recommended for use above 425 oC. If in doubt please ask, we will advise suitable materials for the temperature, pressure and media.

Size DN 6 10 15 20 25

Dim A mm 101.6 101.6 108 117 127

Component Body Bonnet Seat Disk Stem Gland Bush Back up Gland Yoke Bush

09.18.14

Dimensions Dim B Dim C mm mm 180 100 180 100 190 100 195 100 200 100

Weight Kg 3.5 3.5 4 4 4.5

Material St.St. Type 316L St.St. Type 316L St.St. Type 316L or integral St.St. Type 316L with/without Viton seal St.St. Type 316L St.St. Type 316L PTFE Aluminium Bronze

Page 18 of 18