Upgrades
Poly Sway Bar Bushings 575026 575117 585308 585261 585148
Polyurethane Front & Rear Suspension Bushing And Shaft Kit
A complete polyurethane bushing kit with new shafts & sleeves. Designed to quickly replace all factory rubber bushings with new polyurethane bushings. Polyurethane bushings maximize your suspension’s performance by delivering quicker steering response and predictable handling in all driving modes. Set includes rear spring cushions, front control arm bushings, and rear control arm bushings.
571123
Front 26mm, pr.......... 18.50 Front 30mm, pr.......... 17.50 Rear 19mm, pr.......... 17.50 Rear 23mm, pr.......... 17.50 Rear 27mm, pr.......... 17.50
Polyurethane Bushing Lubricant...................6.25 See Our WEBSITE for photos and info.
Suspension Lowering Cushion Bolt Drop your C6’s ride height by up to 2 1/2 inches with this easy to install Lowering Kit. This kit includes 4 bolts that replace the stock spring mounting bolts to give you more ride height adjustment. Comes with complete instructions. 586029 Set................................................................ 56.50
Why Choose Polyurethane?
575099 Pfadt-Aluminum Shaft-Except Z06 (ND).................... 612.00 576129 Pfadt-Aluminum Shaft-Z06 (ND)............................. 706.95
Polyurethane, unlike rubber, is not molded to the steel outer shells. Instead of twisting like rubber, the bushings are free to rotate on sleeves like a bearing. This means the suspension cannot bind and become full floating, resulting in longer life and improved handling. Polyurethane construction withstands oils, ozone, salt, and other corrosive chemicals. All bushings are pre-lubed with graphite to inhibit wear and squeaks.
575141 Steel Shaft....................................................... 295.95
Camber Alignment System RideTech Delrin Control Arm Bushing Upgrade • Delrin bushing design eliminates control arm shift common with
factory bushings • Reduction in deflection creates consistent and predictable handling • Trunnion design captures bushings from both sides increasing strength and rigidity in upper arms • Designed to resist binding at extreme alignment settings • Includes new trunnions CNC machined from 4130 chromoly • No modifications necessary • Replaces all 16 control arm bushings • Split bushing design for easy installation 575037 Except C6 Z06 (ND)........................................ 1,100.00
• CNC Machined Aerospace Aluminum Material • Non-Corrosive Stainless Steel Studs • Yellow Zinc Class 10 Bolts and Nuts • Eliminates Alignment Movement This kit allows you to align the car from the top vs. the eccentric cams on the lower a-arms. This is ideal for auto cross and long track drivers as this is a quick change alignment kit. The aluminum blocks replaces the eccentric cams which can move with high side loading. The block will prevent any lower a-arm camber/caster change. Studs are used on the front upper a-arms in lieu of the OE bolts. By sliding the a-arm off of the stud, you can add or subtract shims to obtain your alignment specs. It will be ideal to have the car aligned with street specs and race specs and note the difference in shims for a quick change out. 575160 Except Z06 (ND).............................................. 469.95 576106 Z06 and ZR1 (ND)............................................ 492.95 (ND) = No Discount
order lines 800-345-4122 • fax orders 800-635-4108 & 269-426-4108 • product assistance 269-426-3342
131