Next Generation FDU User Guide
Chapter 7 FDU Setup The following steps should be done prior to issuing keycards.
7.1 Keycard Expiry Each keycard has an expiry time stored directly on the keycard, after which the keycard is no longer valid.
7.1.1 Guest Keycard The System offers two types of expiry times for Guest level keycards, selectable expiry or variable expiry. If variable expiry is enabled when a keycard is being encoded staff can either use the default setting of the selectable expiry, or they can enter a custom expiry value each time they encode a Guest level keycard. The Variable Expiry feature applies to the following types of guest entry keycards only: Guest, Adjoining Suite, Common Door Suite, Convention Suite and PreRegistered. (To enable Variable Expiry, see Section 7.2.2.1 – 1 Options) If Variable Expiry is disabled, this feature will take effect when keycards are made. 1. Swipe an authorized GMA or MA keycard. For Contactless 790, present valid FDU Authorization Keycard to external Contactless Encoder. 2. Press 7 to select “FDU Setup” menu. 3. Press 1 to select “Keycard Expiry” menu. 4. Press 1 to select “Guest Keycard” menu. 5. Press the right <X> arrow to access Guest Expiry options: 6. Press 0 for nights (1 to 2730) or 1 for Hours (1-24). 7. Use the arrow down <T> button to change expiry selections. Press < > 8. Adjoining Suite, Common Door Suite, One Shot and Convention Suite can be changed using same method. Use the arrow down <T> button to change selections. 9. When all options are set press < >. 10. Your guest keycard expiry selections have now been saved.
PK3536 01_08
46