Sweden
Product Catalogue 2019
Our Story 2018 Genesis India 2015 Genesis LatAm Company opened in BogotĂĄ
2009 UK Flooring Division Acquired supply chain allowing immediate growth in the new market of soft floor covering profiles.
2000 Export Growth Rapid Export growth over 18yrs reaching over 100 countries supporting the Genesis brand.
1996 Expansion & Queens Award Constructed purpose built facility for manufacturing and worldwide distribution. Achieved national recognition for SME Export Sales.
1990 Export Market Identified the potential and exported within 12 months.
1989 The Beginning
Milestones 2004 Tools Researched, developed and launched range of Tools for product diversification and increased market share.
2005 Movement Joints Researched, developed and launched range of Movement Joints for product diversification and increased market share.
2006 Development Metals Anticipated the change in market and enlarged the portfolio of designs and finishes.
2010 Contract Flooring Acquired supply chain allowing immediate growth in the new market of soft floor covering profiles.
2016 Entrance Matting Developed a range of products to suit varying market demands.
Art Z400 SW – 2019
2018 Vision Designed to protect and inspire with variable mood accents
Page 24-31
Page 32-45
Commercial Nosing
Step Edges
Vision
Page 2-23
Page 46-53
Page 54-63
Page 64-71
Anti-Slip, Matting & Acess
Transitions, Covers & Ramps
Movement Joints
Page 72-75
Page 76-82
Page 83-85
Structural Joints
P.V.C Trim
Flexibles
Page 86-89
Page 90-109
Pg 110-113
Luxe
Metal Trim & Listello
Panel Profiles
Page 7
Page 26
Page 32-47
Page 49
Page 87
Page 88
Page 89
Page 96
Page 111
Check out what is new for 2019 This is just a selection of what is new for this year. All new products are indicated throughout the catalogue.
1
+44 (0)1642 713000
info@genesis-gs.com
www.genesis-gs.com
CN
Commercial Nosing
Commercial Nosing We offer you a combination of profiles to suit all types of stairs and installation requirements. Carpet, laminate, tile or vinyl solutions can be found and we even produce bespoke profiles and offer comprehensive drilling, forming and finishing services. Excellent technical support for installations and materials is available.
+44 (0)1642 713000
info@genesis-gs.com
www.genesis-gs.com
2
CN
Commercial Nosing
Commercial Nosing
LRV’s – Clarification Reflectance is the proportion of light that a surface reflects compared to the amount or volume of light that falls on the said surface. An LRV is a value given to a surface to identify the amount of light reflected. People with impaired vision can perceive light and dark, therefore LRV’s are a suitable method to measure contrast between 2 different surfaces. Note that dark, matt or textured surfaces absorb a large amount of light, therefore have low reflectance values, however a combination of one or all light, shiny or smooth surfaces reflect the majority of light and therefore have higher reflectance values. In order to achieve a suitable contrast between different surfaces, ADM 2004 recommend at least a 30 point difference in the LRV’s of the two contrasting surfaces.
Please note the RAL numbers in the above table is a guide only and cannot guarantee an exact match as there are a number of variables within the manufacturing process.
3
+44 (0)1642 713000
Genesis Finish
LRV
RAL
01 White
79.9
9003
16 Black
4.5
9004
20 Brown
9.1
8014
25 Beige
41.1
1001
27 Canvas
53.2
1013
28 Green
6.3
6005
30 Red
10.6
3031
43 Dolphin Grey
27.6
7042
44 Ice Grey
42.1
7001
46 Midnight Grey
12.8
7024
47 Yellow
55.7
1018
48 Cobalt Blue
9.2
5000
52 Lime
30.4
6011
54 Saffron 109 Sky Blue
1017 13.5
113 Tangerine
5015 2000
601 White
82.7
9003
616 Black
4.8
9004
643 Mid Grey
18.3
7000
647 Yellow
46.1
1012
info@genesis-gs.com
www.genesis-gs.com
Slip-resistance tests have been independently undertaken by Lucideon Ltd using the pendulum and inclined platform test. Inclined Platform Test DIN 51130:2010 The critical angle at which a test person reaches the limit of safe walking on an inclined plane is used as a measure of slip resistance.
Pendulum Test BS 7976-2:2002 The energy absorbed by contact with the pre-set distance is read from a physical scale by a pointer that follows the overswing of the pendulum arm. 12 results are averaged to give the final pendulum number which is used to categorise the tile surface.
Results Insert Standard Tredsafe®
Inclined Platform Test DIN 51130:2010* Category 22.9° R11 24.7° R11
Pendulum Test BS 7976-2:2002# Dry Wet 66 54 57 47
*Average of Six Shod Results (Corrected) #
PTV Average Value
The UK slip resistance group recommends the following guidelines; PTV 0-24 25-35 36+
+44 (0)1642 713000
Slip Potential High Moderate Low
info@genesis-gs.com
www.genesis-gs.com
4
CN
Nosing Insert Slip Resistance
Commercial Nosing
Commercial Nosing
CN
Commercial Nosing
Commercial Nosing Drilling Instructions
Plug Diameter 8mm
Drill using Genesis countersunk drill bit
8mm dia counterbore to depth of infil counter-sunk 120°
Start 75mm from one end and set all holes equally as indicated for single and double channel. Length
No. of Holes
600 - 699
2
700 - 1049
3
Plug Diameter 10mm
1050 - 1399
4
1400 - 1749
5
10mm dia counterbore to depth of infil counter-sunk 120°
1750 - 2099
6
2100 - 2449
7
2450 - 2799
8
2800 - 3220
9
4.3mm dia pilot hole
5.5mm dia pilot hole Overall Length
15mm from back edge of infil
Single Channel
75mm
Front
Equally Spaced
Equally Spaced Overall Length
Centre of infil
Double Channel - drill back channel only Front
75mm
5
Equally Spaced
Equally Spaced
+44 (0)1642 713000
Equally Spaced
info@genesis-gs.com
www.genesis-gs.com
1 Prepare surface, it must be clean, smooth and free of debris.
2 Position the profile, check the fit and mark the drill holes.
3 Drill and Plug to suit the screw size.
4 Apply adhesive as per manufacturer’s instructions.
5
6
7
8
Position onto step.
Mechanically fix.
Insert plug.
Remove protective film when applicable.
If fixing inserts separate follow steps 1 – 6, remove release paper from channel and position insert ends flush applying pressure towards the centre finishing with hand roller to ensure adhesion.
Installation - Adhesive
5mm 1
2
3
4
Prepare surface, it must be clean, smooth and free of debris.
Apply 5mm bead to the underside of the profile, 2 lines for Single and 3 for double channel.
Position, press and slide to ensure full bond.
Allow min. 1 hour after fixing. It is the contractor’s responsibility to ensure the bond is secure before opening the area.
Installer must follow individual manufacturers guidelines
+44 (0)1642 713000
info@genesis-gs.com
www.genesis-gs.com
6
CN
Installation - Mechanical Fix
Commercial Nosing
Commercial Nosing
Insert quick reference guide MA
UK
NESIS GE
D
E I TH N
Insert
LRV
NSL
ASL
NHD
AHD
SINGLE DOUBLE SINGLE DOUBLE SINGLE DOUBLE SINGLE DOUBLE
E
CN
Commercial Nosing
Commercial Nosing
NTC/S ATC/S NXF/S LNR P.V.C
Standard 01 White
79.9
16 Black
4.5
20 Brown
9.1
25 Beige
41.1
27 Canvas
53.2
28 Green
6.3
30 Red
10.6
43 Dolphin Grey
27.6
44 Ice Grey
42.1
46 Midnight Grey
12.8
47 Yellow
55.7
48 Cobalt Blue
9.2
52 Lime
30.4
54 Saffron
NEW FINISH
109 Sky Blue
13.5
113 Tangerine Tredsafe® 601 White
82.7
616 Black
4.8
643 Dolphin Grey
18.2
647 Yellow
46.1
NIA50 80 Mill Aluminium
78.9
P.V.C Channel 16 Black Anodising 16 Black 81 Matt Silver 86 Bright Brass 91 Bright Silver
7
+44 (0)1642 713000
info@genesis-gs.com
www.genesis-gs.com
Insert NISL38
Fits NSL Twin Channel
38mm
External No
2mm
Standard - NISL50 Insert NISL50
Fits NSL Single Channel
External No
50mm 2mm
Standard - NIHD38 Insert NIHD38
Fits NHD Twin Channel
38mm
External No
3.4mm
Standard - NIHD50 Insert NIHD50
Fits NHD Single Channel
External No
50mm 3.4mm
Tredsafe® - NITR38 Insert NITR38
Fits NSL, NHD Twin Channel
38mm
External Yes
3mm
Tredsafe® - NITR50 Insert NITR50
Fits NSL, NHD Single Channel
External Yes
50mm 3mm
Castellated - NIA50 Insert NIA50
Fits NHD Single Channel
+44 (0)1642 713000
External No
info@genesis-gs.com
50mm 3.5mm
www.genesis-gs.com
8
CN
Standard - NISL38
Commercial Nosing
Commercial Nosing
CN
Commercial Nosing
Case Study
Spanish City - Whitley Bay NSL19 / NHD08 Project Specifications Product Specified: NSL19 / NHD08 Colour Specified: Bespoke bronze finish with a brown insert Sector: Hospitality Project Description Originally completed in 1910, ‘The Dome’ became a hub of activity and interest, not only because it was home to many attractions, but because of its stunning architecture and unique design. Almost 18 years after the venue’s final closure, Spanish City reopens following a restoration project that sees historical features brought back to their former glory and the introduction of new leisure facilities including; family-friendly venues, a fine dining restaurant, tearooms, event spaces and a champagne bar taking residence inside the famous landmark. Tradition was key in this renovation project and the need for hard wearing stair nosings that would prevent slips but still not look out of place were a must have. The nosings were finished in a bespoke bronze with a brown infill in-order to keep to traditional look and feel of the building. NHD08 has been used on the round edged steps to give full protection to the step edges and NSL19 has been used on the traditional straight edged steps.
9
+44 (0)1642 713000
info@genesis-gs.com
www.genesis-gs.com
E I TH N
D
62mm 3mm
62mm
NXF05
33mm
3mm
E
MA
UK
NESIS GE
Insert
LRV
NXF N XFS
Standard 16 Black
4.5
44 Ice Grey
42.1
47 Yellow
55.7
Anodising 16 Black 81 Matt Silver
NXF06
33mm
86 Bright Brass 91 Bright Silver
56mm
NXF/S Rigid & Flexible
3mm
56mm
NXFS01
33mm
3mm
55mm 3.5mm
NXFS02
33mm
Channel NXF
NEW DESIGN
Channel NXFS 80 Mill
80 Mill
Alu
Alu
Anodising - Maximum length 3m Please note; anodising is not a stock item - lead times apply
16 Black
81 Matt
Silver
86 Bright
Brass
91 Bright
Silver
Standard Insert 16 Black
44 Ice
Grey
+44 (0)1642 713000
47 Yellow
info@genesis-gs.com
www.genesis-gs.com
10
CN
Frontier NXF/S Available in 2.77m Standard Lengths.
Commercial Nosing
Commercial Nosing
Slimline Aluminium Nosings Available in 2.46m, 2.77m, 3.22m Standard Lengths. 56mm
32mm
57mm
NSL01
57mm
NSL02
NSL03
32mm
40mm
85mm
32mm
85mm
NSL09 NSL10
85mm
32mm
NSL29
66mm
40mm
NSL15
66mm
32mm
NSL16
56mm 32mm
NSL19 DDA Compliant
57mm
NSL20 DDA Compliant
55mm
67mm
NSL21 DDA Compliant
55mm
67mm
NSL26 DDA Compliant
55mm
55mm
75mm
75mm
58mm
DDA Compliant
69mm
NSL28 58mm
DDA Compliant
NSL25
68mm
40mm
11
+44 (0)1642 713000
info@genesis-gs.com
NSL23 with silicone carbide insert 2.77m & 3.00m Only
•S SE U
BLE F ITA
33mm
NAL U ER
NSL27
EX OR T
CN
Commercial Nosing
Commercial Nosing
www.genesis-gs.com
MA
Aluminium
D
E I TH N
E
80 Mill
UK
NESIS GE
LRV = 78.9
Anodising - Maximum length 3m Please note; anodising is not a stock item - lead times apply
16 Black
81 Matt
Silver
86 Bright
91 Bright
Brass
Silver
Standard Insert 01 White
16 Black
20 Brown
25 Beige
27 Canvas
28 Green
30 Red
43 Dolphin
44 Ice
46 Midnight 47 Yellow
Grey
52 Lime
Grey
54 Saffron 109 Sky
Blue
NEW
Grey
48 Cobalt Blue
113 Tangerine
FINISH
Insert
LRV
SINGLE DOUBLE
Standard 01 White 16 Black 20 Brown 25 Beige 27 Canvas 28 Green 30 Red 43 Dolphin Grey 44 Ice Grey 46 Midnight Grey 47 Yellow 48 Cobalt Blue 52 Lime 54 Saffron NEW 109 Sky Blue 113 Tangerine
79.9 4.5 9.1 41.1 53.2 6.3 10.6 27.6 42.1 12.8 55.7 9.2 30.4
FINISH
13.5
Tredsafe® 601 White 616 Black 643 Dolphin Grey 647 Yellow
82.7 4.8 18.2 46.1
Anodising 16 Black 81 Matt Silver 86 Bright Brass 91 Bright Silver
Standard
38mm 2mm 50mm
Tredsafe® Insert 601 White
616 Black
2mm
643 Dolphin 647 Yellow Grey
Tredsafe®
38mm 3mm 50mm
3mm
+44 (0)1642 713000
info@genesis-gs.com
www.genesis-gs.com
12
CN
Channel
Commercial Nosing
Commercial Nosing
CN
Commercial Nosing
Commercial Nosing AluminatorÂŽ Slimline Aluminium Nosings Available in 2.46m, 2.77m, 3.22m Standard Lengths. 56mm
32mm
57mm
57mm
ASL01
ASL02
ASL03
40mm
32mm
85mm
32mm
85mm
ASL09
32mm
ASL10
85mm
ASL29
66mm
40mm
ASL15
66mm
32mm
ASL16
56mm
32mm
ASL19 DDA Compliant
57mm
ASL20 DDA Compliant
55mm
67mm
ASL21 DDA Compliant
55mm
67mm
55mm
ASL26 DDA Compliant 55mm
75mm
58mm
75mm
ASL27 DDA Compliant 58mm
69mm
ASL28 DDA Compliant
ASL25 40mm
13
+44 (0)1642 713000
info@genesis-gs.com
www.genesis-gs.com
MA
Aluminium
D
E I TH N
E
80 Mill
UK
NESIS GE
LRV = 78.9
Anodising - Maximum length 3m Please note; anodising is not a stock item - lead times apply
16 Black
81 Matt
Silver
86 Bright
91 Bright
20 Brown
25 Beige
Brass
Silver
Standard Insert 01 White
27 Canvas
16 Black
28 Green
30 Red
43 Dolphin Grey
Insert
LRV
SINGLE DOUBLE
Standard 01 White 16 Black 20 Brown 25 Beige 27 Canvas 28 Green 30 Red 43 Dolphin Grey 44 Ice Grey 46 Midnight Grey 47 Yellow 48 Cobalt Blue 109 Sky Blue
79.9 4.5 9.1 41.1 53.2 6.3 10.6 27.6 42.1 12.8 55.7 9.2 13.5
Tredsafe® 601 White 616 Black 643 Dolphin Grey 647 Yellow
82.7 4.8 18.2 46.1
Anodising
44 Ice
Grey
46 Midnight 47 Yellow Grey
48 Cobalt Blue
16 Black 81 Matt Silver 86 Bright Brass 91 Bright Silver
109 Sky
Blue
Standard
38mm 2mm 50mm
2mm
Tredsafe® Insert 601 White
616 Black
643 Dolphin 647 Yellow
Tredsafe®
38mm 3mm
Grey
50mm 3mm
+44 (0)1642 713000
info@genesis-gs.com
www.genesis-gs.com
14
CN
Channel
Commercial Nosing
Commercial Nosing
CN
Commercial Nosing
Commercial Nosing Heavy Duty Aluminium Nosings Available in 2.46m, 2.77m, 3.22m Standard Lengths. 60mm
32mm
70mm
NHD05
NHD07
40mm
63mm 71mm
NHD06
NHD08
32mm
55mm
60mm
NHD17
72mm
DDA Compliant 55mm
60mm
NHD22 DDA Compliant
NHD24
55mm
DDA Compliant 55mm
91mm
32mm
NHD11
93mm
NHD12
32mm
91mm
NHD13 35mm
20mm
D 3.5mm
40mm
NNL01 Carpet Connector*
15
NNL02 Ramp Connector*
+44 (0)1642 713000
info@genesis-gs.com
*Available in 3.22m Standard Lengths only
www.genesis-gs.com
MA
Aluminium
D
E I TH N
LRV = 78.9
E
80 Mill
UK
NESIS GE
Anodising - Maximum length 3m Please note; anodising is not a stock item - lead times apply
16 Black
81 Matt
Silver
86 Bright
91 Bright
Brass
Silver
Standard Insert 01 White
16 Black
20 Brown
25 Beige
27 Canvas
28 Green
30 Red
43 Dolphin
44 Ice
46 Midnight 47 Yellow
Grey
Grey
Grey
48 Cobalt Blue
Insert
LRV
Standard 01 White 16 Black 20 Brown 25 Beige 27 Canvas 28 Green 30 Red 43 Dolphin Grey 44 Ice Grey 46 Midnight Grey 47 Yellow 48 Cobalt Blue 52 Lime 109 Sky Blue
79.9 4.5 9.1 41.1 53.2 6.3 10.6 27.6 42.1 12.8 55.7 9.2 30.4 13.5
Tredsafe® 601 White 616 Black 643 Dolphin Grey 647 Yellow
82.7 4.8 18.2 46.1
NIA50 80 Mill Aluminium
52 Lime
Blue
616 Black
78.9
Anodising
109 Sky
16 Black 81 Matt Silver 86 Bright Brass 91 Bright Silver
Tredsafe® Insert 601 White
SINGLE DOUBLE
643 Dolphin 647 Yellow Grey
38mm
Standard
3.4mm
50mm 3.4mm
38mm
Tredsafe®
NIA50 Insert 80 Mill
3mm 50mm 3mm
Alu 50mm
NIA50
+44 (0)1642 713000
info@genesis-gs.com
3.5mm
www.genesis-gs.com
16
CN
Channel
Commercial Nosing
Commercial Nosing
Aluminator® Heavy Duty Nosings Available in 2.46m, 2.77m, 3.22m Standard Lengths. 60mm
32mm
70mm
AHD05
AHD07
63mm 40mm
71mm
AHD06
32mm
AHD08 55mm
91mm
AHD11
93mm
AHD12
32mm
91mm
35mm
AHD13
60mm
68mm
33mm
55mm
72mm
AHD23 with silicone carbide insert 2.77m & 3.00m Only
•S SE U
BLE F ITA
AHD17 DDA Compliant
NAL U ER
32mm
EX OR T
CN
Commercial Nosing
Commercial Nosing
AHD22 DDA Compliant 55mm
60mm
55mm
17
+44 (0)1642 713000
AHD24 DDA Compliant
info@genesis-gs.com
www.genesis-gs.com
Channel (AHD23)
UK
Silver
D
E I TH N
E
81 Matt
Aluminium
MA
80 Mill
LRV = 78.9
Anodising - Maximum length 3m Please note; anodising is not a stock item - lead times apply
16 Black
81 Matt
Silver
86 Bright
91 Bright
20 Brown
25 Beige
Brass
Silver
Standard Insert 01 White
27 Canvas
16 Black
28 Green
30 Red
Insert
NESIS GE
43 Dolphin Grey
LRV
SINGLE DOUBLE
Standard 01 White 16 Black 20 Brown 25 Beige 27 Canvas 28 Green 30 Red 43 Dolphin Grey 44 Ice Grey 46 Midnight Grey 47 Yellow 48 Cobalt Blue 109 Sky Blue
79.9 4.5 9.1 41.1 53.2 6.3 10.6 27.6 42.1 12.8 55.7 9.2 13.5
Tredsafe® 601 White 616 Black 643 Dolphin Grey 647 Yellow
82.7 4.8 18.2 46.1
Anodising
44 Ice
Grey
46 Midnight 47 Yellow Grey
48 Cobalt Blue
16 Black 81 Matt Silver 86 Bright Brass 91 Bright Silver
109 Sky
Blue
38mm
Standard
3.4mm
50mm 3.4mm
Tredsafe®
Tredsafe® Insert 601 White
616 Black
38mm 3mm
643 Dolphin 647 Yellow
+44 (0)1642 713000
Grey
info@genesis-gs.com
50mm 3mm
www.genesis-gs.com
18
CN
Channel
Commercial Nosing
Commercial Nosing
CN
Commercial Nosing
59mm
Commercial Nosing 65mm
33mm
65mm
59mm
33mm
31mm
Hard Nose P.V.C
Available in 3.22m lengths
Heavy Duty 65mm
65mm 65mm
60mm 60mm
60mm
NHP 33mm
AHP 33mm
31mm 65mm
31mm
60mm
32mm
33mm
NHB
AHB
32mm
31mm
65mm
60mm
31mm
60mm
33mm 65mm
33mm
31mm
65mm
59mm
65mm
59mm
33mm
31mm
65mm
33mm
60mm
NSP
33mm 59mm
65mm
ASP 31mm
NSR 31mm
31mm
33mm
60mm
31mm
65mm
65mm
33mm
33mm 59mm
ASR 31mm
33mm
65mm
60mm
65mm
60mm
31mm 31mm
32mm
NSB
32mm 65mm
59mm
33mm
31mm
60mm
32mm
31mm
+44 (0)1642 713000
32mm 65mm
33mm 60mm
32mm
31mm
65mm
60mm
ASB
31mm
65mm
32mm
60mm
59mm
31mm
31mm
19
59mm
33mm
31mm
Slimline
32mm
33mm
65mm
31mm
60mm
31mm
info@genesis-gs.com
65mm
60mm
32mm
www.genesis-gs.com
UK
E
E I TH N
D
16 Black
Standard Insert
27 Canvas
16 Black
20 Brown
30 Red
28 Green
25 Beige
43 Dolphin Grey
Grey
46 Midnight 47 Yellow Grey
48 Cobalt Blue
P.V.C
Standard 01 White
79.9
16 Black
4.5
20 Brown
9.1
25 Beige
41.1
27 Canvas
53.2
28 Green
6.3
30 Red
10.6
43 Dolphin Grey
27.6
44 Ice Grey
42.1
46 Midnight Grey
12.8
47 Yellow
55.7
48 Cobalt Blue
9.2
52 Lime
30.4
54 Saffron
44 Ice
LRV
NEW FINISH
109 Sky Blue
13.5
113 Tangerine Tredsafe®
52 Lime
54* Saffron 109 Sky
Blue
NEW
113* Tangerine
FINISH
82.7
616 Black
4.8
643 Dolphin Grey
18.2
647 Yellow
46.1
P.V.C Channel
*Slimline only
16 Black
Tredsafe® Insert 601 White
601 White
616 Black
643 Dolphin 647 Yellow
Standard
Grey
50mm 2mm 50mm 3.4mm
Tredsafe® 50mm 3mm
+44 (0)1642 713000
info@genesis-gs.com
www.genesis-gs.com
20
CN
MA
Channel
01 White
Insert
NESIS GE
Commercial Nosing
Commercial Nosing
Stair Edge Trim Pre-Formed / Landing Strip MA
UK
NESIS GE
E I TH N
D
E
CN
Commercial Nosing
Commercial Nosing 300 / 350 mm
300 / 350 mm
2500mm
83ยบ
300 / 350 mm
NSA290
D
NSA283
300 / 350 mm
42mm
Front Face
Side Profile Code NSA290 NSA283 NTL1
D (mm) 42 42 42
16 Black
Length (mm) 350 350 2500
Finish 16,80 16,80 16,80
Style Straight Rakeback
Box Qty 10 10 10 Finish 16 is P.V.C. Finish 80 is Aluminium
80 Mill
Aluminium
Stair Edge Trim Clips Code NTAB1
D (mm) 4.5 / 7
Dual Height
Pack Qty 20
4.5mm
7mm
3.5mm
D
NTAB1
Side Profile of NSA/NTL with NTAB1
21
+44 (0)1642 713000
info@genesis-gs.com
www.genesis-gs.com
8mm
Project Specifications Product Specified: NHD11 Insert Specified: Beige Sector: Education Project Description Genesis NHD11 Stair Nosing with Beige infill was installed at Portsmouth’s Central Library in December 2010. The library is one of the cultural highlights of the city with its Guggenheim-esque architecture and third floor arts venue; this meant keeping the stairs modern and safe too. The double channel design gives extra tread area with Genesis’ Beige non slip insert contrasts the floor covering to ensure definition of the step edge and complies with BS8300:2009 and Approved Document M (ADM).
+44 (0)1642 713000
info@genesis-gs.com
www.genesis-gs.com
22
CN
Portsmouth Library NHD11
Commercial Nosing
Case Study
CN
Commercial Nosing
Commercial Nosing Templates/Curves Stair casings can be made to fit most irregular shapes and curves. However each curved step must be treated individually and a separate template made for each using card, felt or paper. Follow these three simple steps as an easy guide to the perfect edge.
Figure 1
Step 1 Place the card or felt on top of the curve that requires a template and draw a line underneath with a felt pen or marker (see Figure 1) following the edge of the curve to create a smooth line.
Card/felt/paper
Side view of stair
Figure 2
Step 2
Card/felt/paper
Cut the shape along the felt pen mark (Figure 2) and clearly indicate the top and front edge of the template.
Top Stair shape Front Edge
Step 3 Clearly mark on the template, the customer name and reference, the profile required, the colour insert required and finally whether your curve is required drilled or undrilled (Figure 3).
Figure 3
Card/felt/paper Top
Customer name or reference profile required, colour insert required, drilled or undrilled.
Front Edge Template of stair and curve
For assistance with any aspect of measuring or making templates please speak to Technical Services. Not available for NXF/S, NTC, ATC or Vision
23
+44 (0)1642 713000
info@genesis-gs.com
www.genesis-gs.com
info@genesis-gs.com
www.genesis-gs.com
24
SE
+44 (0)1642 713000
Step Edges
Step Edges Stair Nosings are not only a requirement in commercial installations they are highly recommended on all stair cases even if building regulations don’t apply, whether it is tile, vinyl, wood or laminate the longevity and appearance of the floor can be extended with the use of a step edge and the Genesis range has all the options. Offering anti-slip and decorative solutions with an array of installation options and materials.
UK
NESIS GE
56mm
E
E I TH N
D
SE
Heavy Duty Ceramic Tile-In Edges
MA
Step Edges
Step Edges 18mm D 56mm
NTC DDA Compliant
55mm
D
ATC DDA Compliant
55mm
Channel
18mm
NIA50 Insert Alu
Silver
16 Black
20 Brown
25 Beige
27 Canvas
01 White
79.9
16 Black
4.5
20 Brown
9.1
25 Beige
41.1
27 Canvas
53.2
28 Green
6.3
30 Red
10.6
43 Dolphin Grey
27.6
44 Ice Grey
42.1
46 Midnight Grey
12.8
47 Yellow
55.7
48 Cobalt Blue
9.2
52 Lime
30.4
30 Red
43 Dolphin Grey
44 Ice
Grey
46 Midnight Grey
13.5
®
601 White
82.7
616 Black
4.8
643 Dolphin Grey
18.2
647 Yellow
46.1
NIA50 80 Mill Aluminium
28 Green
NTC ATC
Standard
Tredsafe
Standard Insert 01 White
LRV
109 Sky Blue
80 Mill
81 Matt
Insert
Standard
78.9
50mm
2mm
47 Yellow
48 Cobalt Blue
52 Lime
109 Sky
Tredsafe®
Blue
50mm
3mm
NIA50
Tredsafe® Insert 601 White
Code NTC100 NTC125 ATC100 ATC125
25
616 Black
D (mm) 10 12.5 10 12.5
50mm 3.5mm
643 Dolphin 647 Yellow Grey
Length (m) 3.22 3.22 3.22 3.22
+44 (0)1642 713000
Finish 81 81 81 81
Box Qty 10 10 10 10
info@genesis-gs.com
www.genesis-gs.com
Step Edges MA
D
E I TH N
D
20mm
NTS
45mm
17mm D
20mm
ATS
Channel 81 Matt
Silver
E
17mm
UK
NESIS GE
Insert
LRV
NTS ATS
Standard 01 White
79.9
16 Black
4.5
20 Brown
9.1
25 Beige
41.1
27 Canvas
53.2
28 Green
6.3
30 Red
10.6
43 Dolphin Grey
27.6
44 Ice Grey
42.1
46 Midnight Grey
12.8
47 Yellow
55.7
48 Cobalt Blue
9.2
109 Sky Blue
13.5
SE
45mm
NEW PRODUCT
Step Edges
Slimline Ceramic Tile-In Edges
Tredsafe®
Standard Insert 01 White
16 Black
27 Canvas
44 Ice
Grey
20 Brown
28 Green
30 Red
46 Midnight 47 Yellow Grey
25 Beige
43 Dolphin Grey
48 Cobalt Blue
601 White
82.7
616 Black
4.8
643 Dolphin Grey
18.2
647 Yellow
46.1 38mm
Standard
3.4mm
Tredsafe®
3mm
38mm
109 Sky
Blue
Tredsafe® Insert 601 White
Code NTS100 NTS125 ATS100 ATS125
616 Black
D (mm) 10 12.5 10 12.5
643 Dolphin 647 Yellow Grey
Length (m) 3.22 3.22 3.22 3.22
+44 (0)1642 713000
Finish 81 81 81 81
Box Qty 10 10 10 10
info@genesis-gs.com
www.genesis-gs.com
26
80 Mill
Aluminium
W
D
BLE F ITA
•S SE U
NAL U ER
SE
Aluminium Retro-Fit
EX OR T
Step Edges
Step Edges
Code NRA50
W x D (mm) 50 x 30
Length (m) 2.77
Finish 80
Box Qty 10
Aluminium Self Adhesive Retro-Fit 40 Oak W
81 Matt
Silver
D
83 Matt
Brass
Code NAS207 NAS209 NAS107 NAS109
27
W x D (mm) 30 x 20 30 x 20 25 x 10 25 x 10
Length (m) 2.7 0.9 2.7 0.9
+44 (0)1642 713000
Finish 40,81,83 40,81,83 40,81,83 40,81,83
info@genesis-gs.com
Box Qty 10 10 10 10
www.genesis-gs.com
Step Edges SE
Step Edges
Aluminium Nosing with Black Rubber Insert 16 Black W
D
Code NRE05
W x D (mm) 54 x 30
Length (m) 2.7
Finish 16 (81 Matt Silver Channel)
Box Qty 10
Aluminium Tile-In 81 Matt
Silver
26mm
D
1.2mm
50mm
NAL U ER
BLE F ITA
•S SE U
EX OR T
Code NLM103 NLM123
W x D (mm) 26 x 10 26 x 12
+44 (0)1642 713000
Length (m) 3 3
Finish 81 81
info@genesis-gs.com
Box Qty 10 10
www.genesis-gs.com
28
81 Matt
3mm
Silver
10mm 1mm
91 Bright
Silver 12mm
28mm
NAL U ER
BLE F ITA
•S SE U
Code NFA125
W x D (mm) 3 x 10/12
Length (m) 2.6
Finish 81,91
Box Qty 20
Aluminium Tile-In Bullnose 81 Matt
Silver D 1mm
91 Bright
Silver 37mm
NAL U ER
BLE F ITA
•S SE U
EX OR T
SE
Aluminium Formable 2 in 1
EX OR T
Step Edges
Step Edges
Code NAT105 NAT125
29
D (mm) 10 12
Length (m) 2.6 2.6
+44 (0)1642 713000
Finish 81,91 81,91
info@genesis-gs.com
Box Qty 20 20
www.genesis-gs.com
Step Edges SE
16 Black
Step Edges
Aluminium Stair Grip + PVC Top and End Caps 31.5mm D
35 Dark
Grey
Code NIB106 NIB126 End Caps Code NUC102
W x D (mm) 30 x 10 30 x 12
Length (m) 2.5 2.5
Description Pair of universal end caps
Finish 16,35 16,35
Box Qty 10 10
Finish 16,35
Pack Qty 2
Aluminium Tile-In with Carbide Insert 81 Matt
Silver
26mm D
1mm
NAL U ER
BLE F ITA
•S SE U
EX OR T
Code NLC106 NLC126
D (mm) 10 12.5
+44 (0)1642 713000
Length (m) 2.6 2.6
Finish 81 81
info@genesis-gs.com
Box Qty 10 10
www.genesis-gs.com
30
84 Stainless Steel
25mm
10mm
D
BLE F ITA
NAL U ER
•S SE U
Code NSS106 NSS126
D (mm) 10 12
Length (m) 2.5 2.5
Finish 84 84
Box Qty 10 10
Aluminium Tile-In Step Edge 81 Matt
W
Silver
D
35mm
NAL U ER
BLE F ITA
•S SE U
EX OR T
SE
Stainless Steel Tile-In Nosing
EX OR T
Step Edges
Step Edges
Code NLT108 NLT128
31
W x D (mm) 19 x 10 19 x 12.5
Length (m) 2.8 2.8
+44 (0)1642 713000
Finish 81 81
info@genesis-gs.com
Box Qty 10 10
www.genesis-gs.com
+44 (0)1642 713000
info@genesis-gs.com
www.genesis-gs.com
32
V
LED & Lighting
The Vision range is the latest inovative product in our portfolio. Vision is comprised of both commercial and domestic profiles with an option of illumination – RGB or three shades of white. Each lighting system has its own benefits and our sales team is here to help with your requirements – contact us for more information.
V
LED & Lighting
Introduction
33
+44 (0)1642 713000
info@genesis-gs.com
www.genesis-gs.com
Introduction
The range is specifically designed to accept universal LED systems, RGB and FlatLite® for Steps, Listello, Edges and Skirting offering unlimited freedom of design. Developed with simplicity in mind, the range of supporting hardware offers the most frequently installed systems with Polycarbonate Diffusers that eliminate the hotspots. • 220 & 110V Drivers • Durable aluminium carriers • Efficient LED 4.8W or 9.6W per metre • Average lifespan 40,000 Hours • Simple installation and selection • 25mm Cutting Intervals • IP65 Certified LED and RGB
+44 (0)1642 713000
info@genesis-gs.com
• • • •
120 LED’s per metre UL approved diffusers Enhanced safety Manufactured to A-A++ energy rating • Remote control options compatible with iPhone and Android devices • 3M VHB adhesive backing
www.genesis-gs.com
34
V
LED & Lighting
Vision offers a range of premium profiles for commercial and domestic applications, designed to protect and inspire with variable mood accents
Vision Nosing NEW PRODUCT
LED & Lighting
V
Vision - Light Out
NECS50
77.5mm 3.5mm
NSLR50
Insert
LRV
SINGLE
Standard 01 White 16 Black 20 Brown 25 Beige 27 Canvas 28 Green 30 Red 43 Dolphin Grey 44 Ice Grey 46 Midnight Grey 47 Yellow 48 Cobalt Blue 52 Lime 54 Saffron 109 Sky Blue 113 Tangerine
79.9 4.5 9.1 41.1 53.2 6.3 10.6 27.6 42.1 12.8 55.7 9.2 30.4 13.5
Tredsafe速 48.5mm
Channel 81 Matt
Silver
601 White 616 Black 643 Dolphin Grey 647 Yellow
82.7 4.8 18.2 46.1
Anodising 81 Matt Silver
Standard Insert 01 White
16 Black
20 Brown
25 Beige
Standard
50mm
2mm
27 Canvas
28 Green
30 Red
44 Ice
46 Midnight 47 Yellow
52 Lime
54 Saffron 109 Sky
Grey
Grey
NEW
Blue
43 Dolphin Grey
48 Cobalt Blue
113 Tangerine
Tredsafe速
50mm
3mm
Lighting System Vision LED Vision CCT RGB LED FlatLite速
FINISH
Tredsafe速 Insert 601 White
35
616 Black
643 Dolphin 647 Yellow Grey
+44 (0)1642 713000
info@genesis-gs.com
www.genesis-gs.com
Nosing Vision Vision - Light Down
NEW PRODUCT
3.5mm
Standard 01 White 16 Black 20 Brown 25 Beige 27 Canvas 28 Green 30 Red 43 Dolphin Grey 44 Ice Grey 46 Midnight Grey 47 Yellow 48 Cobalt Blue 52 Lime 109 Sky Blue
79.9 4.5 9.1 41.1 53.2 6.3 10.6 27.6 42.1 12.8 55.7 9.2 30.4 13.5
Tredsafe速
NALR50
26mm
SINGLE
Channel 81 Matt
Silver
601 White 616 Black 643 Dolphin Grey 647 Yellow
82.7 4.8 18.2 46.1
Anodising 81 Matt Silver
Standard Insert 01 White
16 Black
20 Brown
25 Beige
27 Canvas
Standard
50mm
2mm
28 Green
30 Red
43 Dolphin
47 Yellow
48 Cobalt
52 Lime
Grey
Blue
44 Ice
Grey
46 Midnight
109 Sky
Blue
Grey
Tredsafe速
50mm
3mm
Lighting System Vision LED Vision CCT RGB LED FlatLite速
Tredsafe速 Insert 601 White
616 Black
643 Dolphin 647 Yellow
+44 (0)1642 713000
Grey
info@genesis-gs.com
www.genesis-gs.com
36
V
76.5mm
LRV
LED & Lighting
NECR50
Insert
V
LED & Lighting
Vision Skirting
Vision - Skirting
NEW PRODUCT
81 Matt
Silver
11mm
12mm
94 Brushed Silver
100mm
Code W x D (mm) Length (m) Finish KLD118 100 x 11 2.8 81,94 End Caps NPC100 10 81
37
+44 (0)1642 713000
Description Channel
Box Qty 10
End Caps (pair)
10
info@genesis-gs.com
Lighting System Vision LED Vision CCT RGB LED FlatLite®
www.genesis-gs.com
Edge Vision Vision - Step
NEW PRODUCT
81 Matt
Silver
42mm
D
X
Code D x X (mm) Length (m) NLD908 9 x 20 2.8 NLD118 11 x 22 2.8 End Caps NPC100 10
Finish 81 81
Description Channel Channel
Box Qty 10 10
81
End Caps
10
Lighting System Vision LED Vision CCT RGB LED FlatLite®
Vision - MultiFix
NEW PRODUCT
81 Matt
Silver
17mm
D
34mm
Notch to make leg removable
Code D (mm) TLD108 10 TLD128 12 End Caps TUC100 10
Length (m) Finish 2.8 81 2.8 81
+44 (0)1642 713000
81
Description Channel Channel
Box Qty 10 10
End Caps (pair)
10
info@genesis-gs.com
Lighting System Vision LED Vision CCT RGB LED FlatLite®
www.genesis-gs.com
38
V
LED & Lighting
11.5mm
Vision FlatLite
速
V
LED & Lighting
Vision TreadLite
91mm
LNR22
35mm
Anodising - Maximum length 3m 16 Black
13mm
81 Matt
Silver
13mm
4.7mm
Insert Standard
LRV
01 White 16 Black 20 Brown 25 Beige 27 Canvas 28 Green 30 Red 43 Dolphin Grey 44 Ice Grey 46 Midnight Grey 47 Yellow 48 Cobalt Blue 52 Lime 109 Sky Blue Tredsafe速
79.9 4.5 9.1 41.1 53.2 6.3 10.6 27.6 42.1 12.8 55.7 9.2 30.4 13.5
601 White 616 Black 643 Dolphin Grey 647 Yellow NIA50
82.7 4.8 18.2 46.1
80 Mill Aluminium
78.9
LNR
Lighting System Vision LED Vision CCT RGB LED FlatLite速
4.7mm
Vision - Listello 91 Bright
8mm
Silver
24mm
4.7mm
Code LLA250
39
D (mm) 24 x 8
Length (m) Finish 2.5m 91
4.7mm
+44 (0)1642 713000
Description 13mm
Box Qty 10
info@genesis-gs.com
Lighting System Vision LED Vision CCT RGB LED FlatLite速
www.genesis-gs.com
Lighting System Vision
The premier system offering an innovative continuous low energy Electroluminescent light with varying colour options offering glare free illumination
Code LFL130.01 LFL130.109 DSD200 DSD400 DSD1000
Description Flatlite White 0.28W Flatlite Sky Blue 0.28W AC Invertor 6W Max 1-20 mtrs AC Invertor 12W Max 20-40 mtrs AC Invertor 28W Max 40-100 mtrs
Box Qty mtr mtr 1 1 1
Colour Options
01 White
109 Sky Blue
Please Note: Smart Driver is needed to power this system Full installation instructions available online www.genesis-gs.com
+44 (0)1642 713000
info@genesis-gs.com
www.genesis-gs.com
40
V
LED & Lighting
FlatLiteÂŽ
V
LED & Lighting
Vision Lighting System
NEW
LED System
PRODUCT
Safe and secure with 12V IP65 protection class as standard and premium 4.8W or 9.6W 120 LED’s per metre. Available in 4000K, or to achieve the optimal effect, our CCT option offers 3000K, 4000K and 6000K in a single length.
Warm 3000K
Natural 4000K
Code LD12483.NW LD12963.NW LD12485.NW LD12965.NW
Description 4.8W 3MTR LED Natural White 9.6W 3MTR LED Natural White 4.8W 5MTR LED Natural White 9.6W 5MTR LED Natural White
Box Qty 1 1 1 1
Code LCT12965
Description 9.6W 5MTR CCT Multiple White Warm, Natural & Cold
Box Qty 1
41
+44 (0)1642 713000
Cold 6000K
Accessories on Page 43-44
info@genesis-gs.com
www.genesis-gs.com
Lighting System Vision
PRODUCT
This dynamic system offers a range of mood lighting powered by 12V IP65 protection, the 60 LED per metre powers varying colours with remote colour changing and dimming within a maximum of 4 Zones. RGB is14.4W per metre and cuttable every 50mm. Colour Spectrum
Code LGB12143 LGB12145
Description 14.4W 3MTR RGB 14.4W 5MTR RGB
+44 (0)1642 713000
Box Qty 1 1
info@genesis-gs.com
Accessories on Page 43-44
www.genesis-gs.com
42
V
LED & Lighting
NEW
RGB System
Vision Drivers & Accessories 12V Drivers (LED)
CCT / RGB
V
Multiple White & Red, Green, Blue
LED & Lighting
Single White
Code LDD30 LDD50 LDD100 LDD1103 (110V) LDD1105 (110V)
Description LED DRIVER 30W LED DRIVER 50W LED DRIVER 100W LED DRIVER 30W LED DRIVER 50W
Box Qty 1 1 1 1 1
LED length x wattage = total wattage for driver. 1x driver and 1x receiver required per independent zone Code LUNDR30 LUNDR50 LUNDR100
Description CCT RGB DRIVER 30W CCT RGB DRIVER 50W CCT RGB DRIVER 100W
Box Qty 1 1 1
Single Zone Options (CCT / RGB Driver Compatable)
Code LCTRAD
43
Description Multiple White - CCT Remote Dimmer and Controller
Code Description LEDRAD Single White - LED Remote Dimmer and Controller
Box Qty 1
Code Description LGBRAD RGB - Remote Dimmer and Controller
Box Qty 1
Box Qty 1
+44 (0)1642 713000
info@genesis-gs.com
www.genesis-gs.com
Drivers & Accessories Vision Multi Zone Options (4 Zones / 3 Scenes) 1x driver and 1x receiver required per independent zone
Code Description LGBMZR Multiple White & RGB - Receiver - Max 720W LGBREM Multiple White & RGB - Remote - 30M Range
Box Qty 1
1
Code Description Box Qty LCTMZR Multiple White - CCT Receiver - 1 Max 720W LCTREM Multiple White - CCT Remote - 1 30M Range
1
Universal Options
Code Description Box Qty LDP1204 12V, IP65 0.4W Recess Mounted with 1 Micro connection, total Ø30mm, available 3000, 4000, 6000K. LED30 Driver required
+44 (0)1642 713000
info@genesis-gs.com
Code LDWIFI
Description Box Qty iPhone / Android compatible 1 with CCT / RGB Receiver and Driver
www.genesis-gs.com
44
V
Box Qty 1 LED & Lighting
Code Description LEDMZR Single White - LED Receiver Max 288W LEDREM Single White - LED Remote 30M Range
Vision Overview What you need 2. Driver
3. Receiver (optional) single zone or multi zone
LED N/A NATURAL WHITE 4000K (LD12 Page 41)
N/A
(LDD Pg 43)
CCT RGB NATURAL WHITE 4000K (LD12 Page 41)
or
(LUND Pg 43)
(LEDRAD Pg 43)
CCT RGB
(LCT12965 Page 41)
(LED Pg 44)
or
COLD WHITE 6000K NATURAL WHITE 4000K WARM WHITE 3000K (LUND Pg 43)
(LCTRAD Pg 43)
CCT RGB
(LCT Pg 44)
or
RED GREEN BLUE (LGB121214 Page 42)
(LUND Pg 43)
(LGBRAD Pg 43)
(LGB Pg 44)
Zones
600mm
The tape should be at least 60cm from water source due to the wires / leads
600mm
45
600mm
Zone 0 is IP67 and above Zone 1 is IP64 plus Zone 2 is IP64 plus
600mm
V
LED & Lighting
1. Lighting System
+44 (0)1642 713000
info@genesis-gs.com
Radius 600mm
www.genesis-gs.com
Accessibility; This range of warning and guidance tactile systems offer a self-adhesive and shanked installation. We also offer site installation allowing for your project to comply with building regulations in style and without hassle. +44 (0)1642 713000 info@genesis-gs.com www.genesis-gs.com
46
AMA
Matting; Residual dirt and moisture is removed decreasing the risk of slipping and increasing the life of your floor.
Anti-Slip, Matting and Access
Anti-Slip, Matting & Access Anti-Slip; RezTredÂŽ Installation is simple with no grooving necessary and able to take traffic within 90 minutes of application.
BLE F ITA
•S SE U
NAL U ER
AMA
Genesis are proud to introduce our anti-slip services to the corporate and retail world. Our patented anti-slip resin finishes can be applied onto virtually any surface including natural stones, terrazzo, ceramics, porcelains, glazed tiles, metal treads, wood and glass. Our inserts provide a reliable, long lasting, slip-resistant, Equality Act 2010 compliant surface and are suitable for heavy foot traffic. All products can be retro-fitted as well as factory installed.
EX OR T
Anti-Slip, Matting and Access
Anti-Slip
01 White
47
+44 (0)1642 713000
info@genesis-gs.com
16 Black
47 Yellow
www.genesis-gs.com
Anti-Slip Code NRES NRES252 - STEN NRES103 - STEN NRES25D - STEN NRES - GUN NRES - SQUEEGEE NRES - CLEAN NRES - NOZZ NRES - GLOVE
Description Tube of Resin - 400ml 25mm Strip Stencil - 1.2m 10mm Strip Stencil - 1.2m 25mm Disc Stencil - 1.2m Applicator Gun Applicator Squeegee Cleaner Replacement Nozzle Gloves
Finish 01,16,47
Box Qty 1 1 1 1 1 1 1 1 1
AMA
Anti-Slip, Matting and Access
Case Study The Shaare Sedek Synagogue in Manchester requested a safer solution to make their stair edges slip resistant as they were currently using caution tape. Our RezTred® Anti Slip Tread Kit provided the perfect solution and we were able to install it the same day so that it was ready for use by the 6pm service. We are not limited to straight lines, think outside the box and we can create almost any design you require.
+44 (0)1642 713000
info@genesis-gs.com
www.genesis-gs.com
48
AMA
Anti-Slip, Matting and Access
Guidance
The traditional 9mm Ø shank method or 3M adhered versions offer an incredibly versatile system that can provide an instant DDA and Equality Act 2010 compliant tactile surface to any platform edge, stairway or ramp due to their unique installation methods. Manufactured from Stainless Steel grade 316 or Polyurethane, both of which are highly durable and offer excellent contrasting options to ensure conformity within internal and external applications. Aluminium, Brass and other design options available, minimum order quantities may apply.
Stainless Steel Tactile Crosshatch
Anti-Slip
Circle
Infill 01 White
16 Black
47 Yellow
Self Adhesive
Shanked ø 25mm
ø 25mm
4mm
4mm
PU Tactile Groove
NEW
PRODUCT
13mm
Cross
ø 6mm
49
+44 (0)1642 713000
info@genesis-gs.com
www.genesis-gs.com
Guidance Stainless Steel Shanked Code FTSSD25 FTSCD25 FTCHD25
Ø (mm) 25 25 25
Description Stainless Steel Anti-Slip Tactile Stainless Steel Circle Tactile Stainless Steel Crosshatch Tactile
Finish 01,16,47 84 84
Box Qty 20 20 20
Description Stainless Steel Anti-Slip Shanked Stainless Steel Anti-Slip Self Adhesive
Finish 01,16,47 01,16,47
Box Qty 20 20
Description PU Groove Tactile PU Cross Tactile
Finish 16 16
Box Qty 20 20
Finish 16 16
Box Qty 20 20
Finish 16
Box Qty 20
Stainless Steel Self Adhesive Code FTSAS25 FTSSA25 FTSCA25
Ø (mm) 25 25 25
Description Stainless Steel Anti-Slip Tactile Stainless Steel Circle Tactile Stainless Steel Crosshatch Tactile
Stainless Steel Corduroy Tactile Trim Code FTCD280 FTCA280
W x L (mm) 25 x 280 25 x 280
PU Tactile Shanked Code FTPCD25 FTPHD25
W x L (mm) 25 x 25 25 x 25
PU Tactile Self Adhesive Code FTPYA25 FTPCA25
W x L (mm) 25 x 25 25 x 25
Description PU Groove Tactile PU Cross Tactile
NEW
PRODUCT
NEW
PRODUCT
PU Corduroy Tactile Self Adhesive Code FTPA280
W x L (mm) 25 x 280
Description PU Corduroy Tactile
NEW
PRODUCT
NAL U ER
BLE F ITA
•S SE U
EX OR T
Shanked
Self Adhesive
+44 (0)1642 713000
info@genesis-gs.com
www.genesis-gs.com
50
AMA
Box Qty 20 20 20
Anti-Slip, Matting and Access
Finish 01,16,47 84 84
Entrance Matting TrakMat® Fluted Rubber
D
E I TH N
E
MA
UK
NESIS GE
16 Black
Use outside for primary coarse dirt retention. Aluminium sections linked by semi-rigid P.V.C. to deaden traffic noise and allow rolling up of the mat. Designed for internal and external use. Code EM8950 EM8951 EM8952
Height (mm) 12 17 22
Finish 16 16 16
Size m² m² m²
TrakMat® Loop Pile Red
Grey
Natural
Light to Medium Traffic <2000/day
NESIS GE
51
Height (mm) 12 12 12 12 17 17 17 17 22 22 22 22
E I TH N
D
Code EM8900 EM8901 EM8902 EM8903 EM8910 EM8911 EM8912 EM8913 EM8920 EM8921 EM8922 EM8923
MA
Use inside to clean and absorb residual moisture and dirt.
UK
Anthracite
E
AMA
Anti-Slip, Matting and Access
Light to Medium Traffic <2000/day
Finish Anthracite Grey Natural Red Anthracite Grey Natural Red Anthracite Grey Natural Red
+44 (0)1642 713000
info@genesis-gs.com
Size m² m² m² m² m² m² m² m² m² m² m² m²
www.genesis-gs.com
Entrance Matting Reversible Rubber 16 Black
Heavy Traffic >2000/day
Height (mm) 18 12
Finish 16 16
AMA
Code R8030 R8031
Anti-Slip, Matting and Access
Use outside for primary coarse dirt retention. Aluminium sections containing rubber inserts linked with galvanised steel cables and secured with plated fixings. Designed for internal or external use. Size m² m²
Reversible Superior insert Black
Grey
Heavy Traffic >2000/day Use inside to clean and absorb residual moisture and dirt. Reversible inserts are fitted between mill profiles and assembled with galvanised steel rods. Code R8000 R8016 R8002 R8003
Height (mm) 18 18 12 12
+44 (0)1642 713000
Finish Grey Black Grey Black
info@genesis-gs.com
Size m² m² m² m²
www.genesis-gs.com
52
Entrance Matting Bevelled Access Profile Aluminium Silver 20mm
AMA
Anti-Slip, Matting and Access
47mm
Code R6115
Height (mm) 20
Length (m) 3
Finish Silver
Box Qty 1
See also RAA154 Aluminium Access Ramp - Page 62
Accessories 6mm
6mm
13mm
17mm
6mm 23mm
R16104 Code R6100 R6101 R6113 R16104
Length (m) 4 4 4
23mm
R6100 / R6101
R6113
Description Matwell Frame 17â&#x20AC;&#x201C;23mm for mats 17 or 23mm deep - Silver Matwell Frame 17â&#x20AC;&#x201C;23mm for mats 17 or 23mm deep - Brass Matwell Frame 13mm for mats up to 13mm deep - Silver Pack of 4 corner angles for frame -Silver
Now available...
Box Qty 1 1 1 1
...Entrance Matting Samples Folder
Order yours today!
53
+44 (0)1642 713000
info@genesis-gs.com
www.genesis-gs.com
info@genesis-gs.com
www.genesis-gs.com
54
TCR
+44 (0)1642 713000
Transitions, Transitions, Covers, Ramps Ramps
Transitions Our range of transition profiles provide an extensive portfolio of both commercial and DIY products â&#x20AC;&#x201C; all giving you performance, function and aesthetics. With different colours, designs and materials, our range will complement most floor coverings.
Transitions Self Adhesive 40 Oak W D
CAS407
81 Matt
Silver
W D
CAS25
83 Matt
Brass
W
D
TCR
Transitions, Covers, Ramps
NAS
W
D
TAS
W D
TAV
Code TAS157 TAS159 TAS107 TAS109 CAS407 CAS409 CAS257 NAS207 NAS209 NAS107 NAS109 TAV257 TAV259
55
W x D (mm) 50 x 15 50 x 15 43 x 10 43 x 10 37 x 3 37 x 3 25 x 3 30 x 20 30 x 20 25 x 10 25 x 10 30 x 2.5 30 x 2.5
Length (m) 2.7 0.9 2.7 0.9 2.7 0.9 2.7 2.7 0.9 2.7 0.9 2.7 0.9
+44 (0)1642 713000
Finish 40,81,83 40,81,83 40,81,83 40,81,83 40,81,83 40,81,83 81 40,81,83 40,81,83 40,81,83 40,81,83 81,83 81,83
info@genesis-gs.com
Box Qty 10 10 10 10 10 10 10 10 10 10 10 10 10
www.genesis-gs.com
Transitions Fast Fit Slimline 81 Matt
Silver
W
83 Matt
Brass 40mm
85 Pewter
TCR
Transitions, Covers, Ramps
Perfect finishing for junctions of different floor coverings of same height. • Covers a gap up to 30mm • TCS for drill fitting option • TCG Multiflex for Carpet installation • TCC Multiflex for all other floor coverings
9mm 13mm
9mm 18mm 25mm
TCG 9mm 13mm
9mm 18mm 25mm
TCC
Code TCS409 TCS405 TCG109 TCC109
W (mm) 40 40 9 9
+44 (0)1642 713000
Length (m) 0.92 1.85 0.92 0.92
Finish 81,83,85 81,83,85 80 80
info@genesis-gs.com
Box Qty 20 20 20 20
www.genesis-gs.com
56
Transitions Fast Fit Ramp System
TCR
Transitions, Covers, Ramps
Unique Clip System. Allows use with different floor covering material depths. Accommodates height variation up to 20mm. • TCR for drill fitting option • TCG Multiflex base for carpet installation • TCC Multiflex base for all other floor coverings • TTG Multiflex set with gripper base • TTC Multiflex set with universal base • All Bases include 5 + 5 clips
Code TCR409 TCR405 TCG109 TCC109 TTG4091 TTC4092 1 2
W (mm) 40 40 9 9 40 40
Length (m) 0.92 1.85 0.92 0.92 0.92 0.92
Finish 39,40,81,83,85,87,91 39,40,81,83,85 80 80 87,91 87,91
Box Qty 20 20 20 20 20 20
TTG409 (TCR & TCG Combined) TTC409 (TCR & TCC Combined) 9mm
W 13mm
9mm 18mm 25mm
x5
TCC
x5
40mm
9mm 13mm
9mm 18mm
TCR
25mm
x5
39 Ash
Grey
57
40 Oak
81 Matt
Silver
+44 (0)1642 713000
83 Matt
Brass
85 Pewter
info@genesis-gs.com
TCG
x5
87 Brass
Effect
91 Bright
Silver
www.genesis-gs.com
Transitions
19mm 9mm
TCR
Transitions, Covers, Ramps
6mm 19mm 9mm
9mm
24mm
6mm
19mm 9mm
9mm
4mm
TTG
TTG
6mm
2.4mm 9mm 24mm
15mm 5mm
6mm 14mm 2.4mm
15mm
9mm
4mm
TTG
5mm
TTG
24mm 14mm 4mm
5mm
14mm 2.4mm
2.4mm
15mm
20mm
5mm
TTG
TTG 14mm
+44 (0)1642 713000
info@genesis-gs.com
2.4mm
www.genesis-gs.com
20mm
58
Transitions Brushed Stainless Cover 102 Brushed
Stainless Steel
W
Pre-drilled.
W (mm) 30 40
Length (m) 2.7 2.7
Finish 102 102
Box Qty 40 40
TCR
Transitions, Covers, Ramps
Code TSC307 TSC407
Vinyl Tread 80 Mill
Aluminium
70mm 4mm 54mm
Inserts available NITR50 & NISL50 See pages 7-8 for details
Code TSL547
59
W x D (mm) 70 x 4
Length (m) 2.7
+44 (0)1642 713000
Finish 80
info@genesis-gs.com
Box Qty 10
www.genesis-gs.com
Transitions Aluminium Z-Bar Carpet Lock 81 Matt
Silver
W
83 Matt
D
Brass
87 Brass
Effect
91 Bright
Silver
Length (m) 0.9 2.7 0.9
Finish 81,83,87,91 81,91 81,83
Box Qty 45 15 45
Finish 87,91
Box Qty 45
TCR
W x D (mm) 30 x 9 30 x 9 30 x 14
Transitions, Covers, Ramps
Code TGA909 TGA907 TGA149
Aluminium Z-Bar Pro 87 Brass
Effect W
91 Bright
Silver
Code TGS159
D
W x D (mm) 30 x 15
+44 (0)1642 713000
Length (m) 0.9
info@genesis-gs.com
www.genesis-gs.com
60
Ramps Clip Tops 16 Black TTOP1 53mm 3.2mm
43 Dolphin
6.25mm
Grey
34mm
TBAS1 80 Mill
Aluminium
TTOP3
UK
37mm
8.55mm
E
E I TH N
D
TCR
MA
Transitions, Covers, Ramps
NESIS GE
Adjustable Depth 8 - 10mm
16.95mm
TBAS3
Code TTOP1 TBAS1 TTOP3 TBAS3
W x D (mm) 53 x 6.25 34 x 6.25 37 x 8 â&#x20AC;&#x201C; 10 17 x 8.55
Length (m) 2.5 2.5 2.5 2.5
Finish 16,43 80 16,43 80
Box Qty 10 10 10 10
Finish 84 84
Box Qty 10 10
Stainless Steel Tile-in Ramp 84 Stainless Steel
W
D
Code RSS104 RSS124
61
W x D (mm) 20 x 10 25 x 12.5
Length (m) 2.5 2.5
+44 (0)1642 713000
info@genesis-gs.com
www.genesis-gs.com
Ramps Tile Aluminium Ramp 80 Mill
Aluminium
W
RSA D
81 Matt
Silver W
RUA D
3mm
Length (m) 2.5 2.5 2.5 2.5
Finish 80,81 80,81 81 81
Box Qty 20 20 20 20
Finish 81 81 81
Box Qty 5 5 5
TCR
W x D (mm) 20 x 10 23 x 12 16 x 10 19 x 12
Transitions, Covers, Ramps
Code RSA104 RSA124 RUA104 RUA124
Aluminium Access Ramp 81 Matt
Silver W
D
Code RAA104 RAA124 RAA154
W x D (mm) 65 x 10 65 x 12.5 90 x 15
+44 (0)1642 713000
Length (m) 2.5 2.5 2.5
info@genesis-gs.com
www.genesis-gs.com
62
Ramps Adjustable Ramp 81 Matt
Silver D
26.5mm
TCR
Transitions, Covers, Ramps
Code RAD100 RAD120
D (mm) 10 12
Length (m) 2.5 2.5
Finish 81 81
Box Qty 10 10
Aluminium Retro-Fit Vinyl Reducer 81 Matt
Silver W
20mm max
Pre-drilled.
Code TVA259 TVA258
W x D (mm) 40 x 2.5 40 x 2.5
Length (m) 0.92 2.8
Finish 81 81
Box Qty 20 20
Aluminium Reducer 81 Matt
Silver
40mm
6.5mm
4mm
RAR077 - for carpet tiles, loose lay PVC tiles etc.
8.5mm
RAR077 80mm
RAR157 - for easy access with pallet trucks, trolleys and wheelchairs.
H
RAR157
Pre-drilled. Code RAR077 RAR157
63
H (mm) 5-7 10.5 - 15
Length (m) 2.7 2.7
+44 (0)1642 713000
Finish 81 81
info@genesis-gs.com
Box Qty 10 20
www.genesis-gs.com
Movement Joints
info@genesis-gs.com
www.genesis-gs.com
64
MJ
+44 (0)1642 713000
Movement Joints
Movement Joints The selection of the correct Expansion Joint is determined by area, traffic and the floor covering. Performance and function are paramount when making your selection and our range meets both those requirements. Youâ&#x20AC;&#x2122;ll find light, medium and heavy duty expansion joints in this section, classed according to the degree of protection the profile offers the floor covering, the anticipated traffic crossing the floor and any point loading.
Movement Joints We make movement as easy as 1,2,3... Selection â&#x20AC;&#x201C; the material 1 Material used to form the joint anchoring legs has no bearing on the movement capacity. Different materials provide added protection to the edge of the floor covering depending on the type and volume of traffic;
MJ
Movement Joints
PVC - Light duty traffic, foot traffic only. Sight line is a consistent colour making it ideal for domestic applications in large rooms or doorways, removable leg for use as a perimeter in rooms greater than 4sqm, waterproof and suitable for swimming pool surrounds and wet areas. Aluminium - Grade 6063 Aluminium provides extra protection to the floor covering and can be used in heavy traffic areas with foot and low point loading wheel traffic, ideal for use in car showrooms and shopping centres. Stainless Steel - Available in Grade 304 and 316, this is the strongest of the materials giving the ultimate protection to the floor covering and ideal for all traffic. Popular with Airports and supermarkets where the wheel traffic has a high point loading and can cause the most impact damage. Grade 316 is recommended in swimming pool surrounds, food prep areas, hospitals and wet areas due to its increased corrosive resistance and strength.
65
+44 (0)1642 713000
info@genesis-gs.com
MLB P.V.C. Movement Joint
MSA Optimax Aluminium HD
MSS Optimax Stainless Steel HD
www.genesis-gs.com
Movement Joints
Don’t Get Stressed Get Genesis! – the movement accommodation is 2 Performance determined by the width of the joint infill. All Genesis joints conform to the BS5385 recommendations providing minimum 20% movement capacity on PVC with polyurethane exceeding the minimum capacity due to it’s flexibility.
– the following points must be 3 Positioning considered when choosing your movement joint:
• In all applications a movement joint must be used DIRECTLY above a joint in the sub-floor, whether this is the same type of subfloor or not. It is often missed domestically on extensions where a new subfloor will be constructed.
• If there are no joints in the subfloor, start from the wall. If there are joints in the subfloor, start from the location of the joint. Positioning should then be 5-8m apart in any direction and ideally in square/ rectangular bays. In domestic applications or corridors this can be extended to 10m.
• In the instance of commercial applications where there is a structural gap in the subfloor the movement joint must not overhang the gap, if the gap is 10mm and the infill of the movement joint is 6mm then select a different movement joint. • When tiling continues from room to room it is good practice to use a movement joint in the doorways, especially if the walls are load bearing. +44 (0)1642 713000
info@genesis-gs.com
• A room 4sqm or larger with load bearing walls should have a perimeter joint in place. • Once a room/project exceeds 20sqm or extends into a second room you should be asking the question about a movement joint!
www.genesis-gs.com
66
MJ
Considerations
Movement Joints
Key points
Movement Joints P.V.C. Joint Covers 16 Black 75mm 2mm
50mm
43 Dolphin
2mm
Grey
MJ
Movement Joints
Code MVP250 MVP275
W x D (mm) 50 x 2 75 x 2
Length (m) 15 15
Infill Finish 16,43 16,43
Box Qty 10 10
Compression Joint with Barbs & Anchors 16 Black
T 9mm
35 Dark
Grey
D
W
Code MCA300 MCB300 MCS300 MCA500 MCB500 MCS500
67
W x D (mm) 12 x 30 12 x 30 11 x 30 12 x 50 12 x 50 11 x 50
T (mm) 1.5 1.5 1 1.5 1.5 1
+44 (0)1642 713000
Length (m) 2.5m 2.5m 2.5m 2.5m 2.5m 2.5m
Finish 16,35 16,35 16,35 16,35 16,35 16,35
info@genesis-gs.com
Material Aluminium Brass Stainless Steel Aluminium Brass Stainless Steel
Box Qty 10 10 10 10 10 10
www.genesis-gs.com
Movement Joints P.V.C. Movement & Perimeter Joint 16 Black 10mm
D 0.8mm
25 Beige 50mm
Notch to make leg removable 10mm
35 Dark
Grey D 0.8mm
Code MLB100 MLB125
D (mm) 10 12.5
Length (m) 2.5 2.5
Infill Finish 16,25,35 16,25,35
Box Qty 25 25
MJ
Movement Joints
P.V.C. Movement & Perimeter Joint - Thin 16 Black 5mm D
25 Beige
1mm
56mm
Notch to make leg removable 35 Dark
5mm
Grey
Code MLT100 MLT125
D
D (mm) 10 12.5
+44 (0)1642 713000
Length (m) 2.5 2.5
1mm
Infill Finish 16,25,35 16,25,35
info@genesis-gs.com
Box Qty 25 25
www.genesis-gs.com
68
Movement Joints Optimax Stainless Steel Heavy Duty 16 Black 14mm
D
35 Dark
25mm
Grey
MJ
Movement Joints
Code MSS100 MSS125
D (mm) 10 12.5
Length (m) 2.5 2.5
Infill Finish 16,35 16,35
Box Qty 10 10
Stainless Steel Heavy Duty 16 Black 10.5mm
D
25 Beige
20mm
8mm
1mm 20mm
35 Dark
Grey
Code MHS100 MHS120 MHS150 MHS225
69
D (mm) 10 12 15 22.5
Length (m) 2.5 2.5 2.5 2.5
+44 (0)1642 713000
Infill Finish 16,25,35 16,25,35 16,25,35 16,25,35
info@genesis-gs.com
Box Qty 10 10 10 10
www.genesis-gs.com
Movement Joints Aluminium Intermediate Joint 16 Black 6mm
D
35 Dark
Grey
Code MMA100 MMA120
1.7mm
1mm
48mm
D (mm) 10 12
Length (m) 2.5 2.5
Infill Finish 16,35 16,35
Box Qty 10 10
MJ
Movement Joints
Optimax Aluminium Heavy Duty 16 Black 9.8mm
2mm
D 0.8mm
25 Beige
9.8mm
35 Dark
Grey
MSI
Code D (mm) Length (m) MSA080 8 2.5 MSA100 10 2.5 MSA125 12 2.5 MSA150 15 2.5 MSA180 18 2.5 MSA225 22.5 2.5 Optimax Aluminium Heavy Duty Replaceable Infill Code D (mm) Length (m) MSI100 9.8 2.5
+44 (0)1642 713000
Infill Finish 16,25,35 16,25,35 16,25,35 16,25,35 16,25,35 16,25,35
Box Qty 10 10 10 10 10 10
Finish 16,25,35
Box Qty 20
info@genesis-gs.com
www.genesis-gs.com
70
MJ
Movement Joints
Case Study
Gatwick Airport - MHS Project Specifications Product Specified: MHS225.35 Colour Specified: Dark Grey Sector: Transport
Project Description When the Gatwick consortium began to renovate the South terminal of Gatwick Airport they needed to ensure that the new floors were protected against the movement of all the daily traffic that they endure. Genesis were able to provide a solution; working with the main contractors, architects and installation contractors a cost effective Stainless Steel Movement Joint was selected from the Genesis range as the perfect fit. The renovation has been part of a (circa) ÂŁ850million investment to see the replacement of floors and ceilings and enhance the experience travellers receive; The Genesis Movement Joint meets and exceeds all standards of Movement Joints and will save the floors from cracking long into the future.
71
+44 (0)1642 713000
info@genesis-gs.com
www.genesis-gs.com
72
SJ
The product will be subject to lateral, vertical and shear movement. Therefore, before selecting the most appropriate movement jointing system, it is important that the movement criteria of the joint is known and advised by a structual engineer to ensure that the proposed system accommodates all the predicted types of movement. +44 (0)1642 713000 info@genesis-gs.com www.genesis-gs.com
Structural Joints
Structural Joints Structural Joints are designed to relieve or absorb anticipated movement between structural elements, which are generally caused by thermal expansion/ contraction, settlement, load transfer, dead loads and at times even seismic activity.
Structural Joints Heavy Duty Aluminium - 30mm 16 Black W
D
35 Dark
Grey
A
SJ
Structural Joints
Smooth Code GFSR3023 GFSR3030 GFSR3050 GFSR3070 Grooved Code GFGR3023 GFGR3030 GFGR3050 GFGR3070
W (mm) 36 36 36 36
D (mm) 23 30 50 70
A (mm) 30 30 30 30
Length (m) 3 3 3 3
Finishes 16,35 16,35 16,35 16,35
Lateral Movement (mm) 8 (± 4) 8 (± 4) 8 (± 4) 8 (± 4)
W (mm) 36 36 36 36
D (mm) 23 30 50 70
A (mm) 30 30 30 30
Length (m) 3 3 3 3
Finishes 16,35 16,35 16,35 16,35
Lateral Movement (mm) 10 (± 5) 10 (± 5) 10 (± 5) 10 (± 5)
Heavy Duty Aluminium - 50mm 16 Black W
D
35 Dark
Grey
A
Smooth Code GFSR5023 GFSR5030 GFSR5050 GFSR5070 Grooved Code GFGR5023 GFGR5030 GFGR5050 GFGR5070
73
W (mm) 56 56 56 56
D (mm) 23 30 50 70
A (mm) 50 50 50 50
Length (m) 3 3 3 3
Finishes 16,35 16,35 16,35 16,35
Lateral Movement (mm) 12 (± 6) 12 (± 6) 12 (± 6) 12 (± 6)
W (mm) 56 56 56 56
D (mm) 23 30 50 70
A (mm) 50 50 50 50
Length (m) 3 3 3 3
Finishes 16,35 16,35 16,35 16,35
Lateral Movement (mm) 14 (± 7) 14 (± 7) 14 (± 7) 14 (± 8)
+44 (0)1642 713000
info@genesis-gs.com
www.genesis-gs.com
Structural Joints Heavy Duty Aluminium Size and Insert Options
32mm 25mm
30mm
23mm
50mm
50mm
72mm 52mm
70mm
50mm
50mm
SJ
Structural Joints
50mm
Insert - Smooth
Insert - Grooved
50mm
50mm
12mm
30mm
12mm
30mm
12mm
12mm
Central Support
+44 (0)1642 713000
info@genesis-gs.com
www.genesis-gs.com
74
Structural Covers Stainless Steel Covers, Self Adhesive 102 Brushed
Stainless Steel
W D
Code GC2796 GC2797 GC2798
W x D (mm) 60 x 5 80 x 5 100 x 5
Length (m) 2.5 2.5 2.5
Finish 102 102 102
Side Drill On request On request On request
Box Qty 10 10 10
Finish 81 81 81
Side Drill On request On request On request
Box Qty 10 10 10
Aluminium Covers, Self Adhesive 81 Matt
Silver W
SJ
Structural Joints
D
Code GC2806 GC2820 GC2814
75
W x D (mm) 60 x 4 80 x 4 100 x 3
Length (m) 3 3 3
+44 (0)1642 713000
info@genesis-gs.com
www.genesis-gs.com
P.V.C. Trim
P.V.C. Trim P.V.C. P.V.C.Trim Trim
P.V.C P.V.C
Genesis P.V.C. Trims are individually designed for a variety of finishing functions, and in various depths and finishes. They are manufactured to the highest standards from top quality virgin, lead free P.V.C.u. and with internal and external corners they are finished professionally, providing a long lasting protective finish to any ceramic installation.
+44 (0)1642 713000
info@genesis-gs.com
www.genesis-gs.com
76
P.V.C. Trim Trim Regular & Corners 7.5mm
D 1mm
P.V.C. Trim
P.V.C
21mm
Code D (mm) ETR608 6 ETR708 7 ETR808 8 ETR108 10 ETR128 12 Corner Pieces Code D (mm) PDM603 6 PDP604 6 PDL803 8 PDP804 8 PDX103 10 PDP104 10 PDX123 12 PDP124 12
Length (m) 2.5 2.5 2.5 2.5 2.5
Finish 01,11,16,32,34,111 01 01,09,10,11,12,13,14,16,20,25,26,32,34,62,63,64,70,72,111,116 01,09,10,11,12,13,14,16,20,24,25,26,32,34,62,64,70,72,81,91,111 01,10,11,14,16,25,32,34,64,70,111
Box Qty 100 100 100 60 60
Finish 01,10,11,14,16,25,32,34 01,34 01,10,11,14,16,25,32,34 01,34 01,10,11,14,16,25,32,34 01,34 01,10,11,14,16,25,32,34 01,34
Pack Qty 100 4 Blister Pack 100 4 Blister Pack 100 4 Blister Pack 100 4 Blister Pack
01 White
09 Caramel 10 Ivory
11 Grey
12 Peach
13 Champers 14 Buff
16 Black
20 Brown
24 Melba
25 Beige
26 Cream
32 Soft
34 Soft Grey 62 Brown
63 Grey
64 White
70 Toffee
72 Roman
81 Matt
91 Bright
Marble
77
Swirl
Marble
+44 (0)1642 713000
Silver
Cream
Silver
info@genesis-gs.com
Marble
Marble
111 Glacier 116 Barley White
Marble
www.genesis-gs.com
P.V.C. Trim Trim Plus & Corners 01 White
D 1mm
1mm
24.5mm
Code ETP908 Corner Pieces Code PCL235
D (mm) 9
Length (m) 2.5
Finish 01
Box Qty 50
D (mm) 9
Type Internal/External
Finish 01
Pack Qty 2 of each
P.V.C. Internal Trim
25mm 9.5mm
D
P.V.C. Trim
P.V.C
9.5mm
19.5mm
Code ETI090
01 White
D (mm) 9
Length (m) 2.5
Finish 01,11
Box Qty 50
11 Grey
+44 (0)1642 713000
info@genesis-gs.com
www.genesis-gs.com
78
P.V.C. Trim P.V.C. Square Trim & Corners 01 White 8mm
D 1mm 27mm
Code TPP104 TPP124 Corner Pieces Code PTP104 PTP124
W x D (mm) 8 x 10 8 x 12
Length (m) 2.5 2.5
Packed 10mm 2 way corner x 4 12mm 2 way corner x 4
Finish 01 01
Box Qty 60 60
Finish 01 01
Box Qty 50 50
P.V.C. Straight Edge Trim 3mm
D
P.V.C. Trim
P.V.C
0.8mm 21mm
Code ESP060 ESP080 ESP100 ESP120 ESP150
01 White
79
D (mm) 6 8 10 12 15
11 Grey
Length (m) 2.5 2.5 2.5 2.5 2.5
16 Black
+44 (0)1642 713000
Finish 01,34 01,11,16,32,34 01,11,16,32,34 01,11,16,32,34 01
32 Soft
Cream
Box Qty 100 100 100 100 100
34 Soft
Grey
info@genesis-gs.com
www.genesis-gs.com
P.V.C. Trim P.V.C. Seal Under / Over Tile & P.V.C. Seal Plus 01 White
1mm
32mm
19mm
18mm
14mm
23mm
SBS180 8mm 20mm
SSP180 P.V.C. Seal Under / Over Tile Code Fixing Length(m) SBS180 Under / over tile 1.8 SPS180 Under tile only 1.8 Corner Pieces Code Packed SMT100 1 corner + 2 end caps P.V.C. Seal Plus Code SSP180 Corner Pieces Code SMP100
Fixing Under / over tile
Length (m) 1.8
Packed 1 corner + 2 end caps
Finish 01 01
Box Qty 25 25
Finish 01
Box Qty 50 packs
Finish 01
Box Qty 50
Finish 01
Box Qty 50 packs
2 Part Adjustable Capping System 01 White P.V.C. Trim
P.V.C
D
W
Code PTS25 End Caps Code PTL25 PTR25
W x D (mm) 25 x 8-10
Length (m) 1.85
Finish 01
Box Qty 25
Orientation Left Right
Pack 25 caps per bag 25 caps per bag
Finish 01 01
Box Qty 50 50
+44 (0)1642 713000
info@genesis-gs.com
www.genesis-gs.com
80
P.V.C. Trim P.V.C. Vinyl to Tile 01 White
11 Grey
EFU
16 Black
EVC
1.2mm 20mm
NESIS GE
D
D
D 45mm
W
W
D
E I TH N
W
E
MA
UK
42mm
3mm
10mm
EVC/EVU Code EVC080 EVU080 EVT080 EVT120 EFU080
W x D (mm) 15 x 8 (punched flange) 15 x 8 (unpunched flange) 15 x 8 15 x 12 15 x 8
Length (m) 2.5 2.5 2.5 2.5 2.5
11mm 15mm
Finish 01,11,16 01 01 01 01
EVT080 EVT120
2mm
10mm
EFU Box Qty 50 50 25 25 50
P.V.C. Trim
P.V.C
P.V.C. Beading 01 White 21mm
Code SRP250 Corner Pieces Code SRE100 SRI100 SRT100
81
Fixing Over tile only
Length (m) 2.5
Packed 2 way external corner x 5 2 way internal corner x 5 3 way internal corner x 5
+44 (0)1642 713000
Finish 01
Box Qty 25
Finish 01 01 01
Box Qty 50 50 50
info@genesis-gs.com
www.genesis-gs.com
P.V.C. Trim P.V.C. Eco Trim 01 White W
D
32 Soft
Cream
1mm
Z
34 Soft
Grey
Suppled in full boxes only. A co-extruded P.V.C. profile made of 50% recycled material specifically designed so the seen area remains high impact virgin material while retaining premium design. Code ECT060 ECT090 ECT120
W x D x Z (mm) 7 x 6 x 23 10 x 9 x 26 13 x 12 x 28
Length (m) 2.5 2.5 2.5
Finish 01,32,34 01,32,34 01,32,34
Box Qty 100 100 100
P.V.C. Retro-Fit Corner Protector 01 White W P.V.C. Trim
P.V.C
D
Code ERP120 ERP200 ERP250 ERP300 ERP500
W x D (mm) 12 x 12 20 x 20 25 x 25 30 x 30 50 x 50
+44 (0)1642 713000
Length (m) 2.5 2.5 2.5 2.5 2.5
Finish 01 01 01 01 01
info@genesis-gs.com
Box Qty 50 50 50 25 25
www.genesis-gs.com
82
UK
Flexibles
E
E I TH N
D
Flexibles
MA
F
NESIS GE
A selection of quality flexible P.V.C. extrusions designed to provide a clean, neat solution for junctions where the floor meets the wall. Solutions are available to suit most applications in terms of safety, performance and aesthetics. Genesis P.V.C. profiles are lead-free and REACH compliant.
83
+44 (0)1642 713000
info@genesis-gs.com
www.genesis-gs.com
Flexibles P.V.C. Flexible Sit On Skirting 16 Black
2mm
43 Dolphin Grey
Code KSO100 KSO1015 KSO150
H
H x D (mm) 100 x 20 100 x 20 150 x 20
Length (m) 2 15 (coil) 2
D
Finish 16,43 16,43 16,43
Box Qty 30 1 20
P.V.C. Flexible Set In Skirting 16 Black
43 Dolphin Grey
H
46 Midnight Grey
D
Code KSI100
H x D (mm) 100 x 50
Length (m) 2
Finish 16,43,46
Box Qty 20
16 Black
W
W
D D
KCOV2 Code KCOV1 KCOV2 KCOV3
W x D (mm) 38 x 38 20 x 20 32 x 32
+44 (0)1642 713000
Length (m) 2 2 2
KCOV1 & 3 Finish 16 16 16
info@genesis-gs.com
Box Qty 30 30 30
www.genesis-gs.com
84
F
Flexibles
P.V.C. Flexible Cove Former
Flexibles P.V.C. Dim Strip 16 Black 4.5mm
2mm 26mm
36mm
RDIM20
RDIM45 6mm
2.5mm
40mm
26mm
RDIM25 Code RDIM20 RDIM25 RDIM45 RDIM60
W x D (mm) 26 x 2 26 x 2.5 36 x 4.5 40 x 6
Length (m) 15 (coil) 15 (coil) 2 2
RDIM60 Finish 16 16 16 16
Box Qty 10 10 40 20
P.V.C. Capping Strip 01 White
16 Black W D
43 Dolphin Grey
F
Flexibles
Code KCS01
W x D (mm) 40 x 2
Length (m) 2
Finish 01,16,43
Box Qty 40
P.V.C. Edge Cap Strip 01 White
16 Black W
D
43 Dolphin Grey
Code KCS02 KCS022
85
W x D (mm) 39.5 x 1.5 39.5 x 1.5
Length (m) 2 20 (coil)
+44 (0)1642 713000
Finish 01,16 01,16,43
info@genesis-gs.com
Box Qty 40 3
www.genesis-gs.com
Whatâ&#x20AC;&#x2122;s life without a little luxury?
The Swarovski range can also be applied to any colour profile to complement your design, please ask for details.
MT
With plated stainless steel, chrome plated aluminium with crystals by Swarovski and solid brass we have the exclusive look covered to achieve the Perfect Finish.
Metal Trim, Luxe & Listello
A range of luxurious tiling profiles to add glitz, glamour and a premium finish to your installation.
Introducing...
Luxurious tiling profiles to add glitz & glamour A range of luxurious tiling profiles to add glitz, glamour and a premium finish to your installation. The Swarovski range can also be applied to any colour profile to complement your design, please ask for details. NOTE: Crystals by Swarovski are not suitable for commercial installations or in wet areas
Swarovski Crystals L
Luxe Range
Triple Crystal on 101 Chrome Effect TDP Code TDP100 TDP120
Size 10mm 12mm
Length (m) 2.5 2.5
For standard TDP see page 94
Finish 101S 101S
Single Crystal on 101 Chrome Effect ESA Code ESA080 ESA100 ESA120
Size 8mm 10mm 12mm
Length (m) 2.5 2.5 2.5
Finish 101S 101S 101S
For standard ESA see page 91
87
+44 (0)1642 713000
info@genesis-gs.com
www.genesis-gs.com
Stunning finishing profiles to compliment your beautiful home
161
Tinted Black
187
195
Gold
Copper
Make a statement with these luxurious stainless steel profiles. Available in three breathtaking finishes, never has stainless steel looked so good!
Plated Stainless Steel Square Edge
Straight Edge Finish 161,187,195 161,187,195 161,187,195
Size 8mm 10mm 12mm
Finish 161,187,195 161,187,195 161,187,195
Corners Code EDQ082 EDQ102 EDQ122
+44 (0)1642 713000
info@genesis-gs.com
Code ESS080 ESS100 ESS120
Size 8mm 10mm 12mm
Finish 161,187,195 161,187,195 161,187,195
For standard ESS see page 102 For standard EQQ see page 103
www.genesis-gs.com
88
L
Size 8mm 10mm 12mm
Luxe Range
Code EQQ080 EQQ100 EQQ120
Beautiful finishing profiles, the icing on the cake!
Our range of solid brass profiles are suitable for both domestic and commercial areas. Solid brass is extremely hard wearing and provides a truly unique finish.
Solid Brass 3mm
L
Luxe Range
10mm
D
D
1mm
1mm 21mm
28mm
Square Edge
Straight Edge
Code TDB107 TDB127
Size 10mm 12mm
Length (m) 2.7 2.7
89
+44 (0)1642 713000
Finish 87 87
Code ESB107 ESB127
info@genesis-gs.com
Size 10mm 12mm
Length (m) 2.7 2.7
Finish 87 87
www.genesis-gs.com
Metal Trim
Metal Trim info@genesis-gs.com
www.genesis-gs.com
MT
+44 (0)1642 713000
Metal Trim & Listello
The Genesis range of metal profiles is without doubt one of the most comprehensive available, covering round, straight, square and even triangular profiles that suit most domestic and commercial applications. Formable options are also available in aluminium and stainless steel. Genesis now has over a hundred different metal corner pieces in various sizes and finishes to create the perfect installation.
90
Metal Trim Straight Aluminium Straight Edge & Formable Trim 3mm D
0.75mm 21mm
ESA030,040,050
3mm
D 0.8mm 21mm
MT
Metal Trim & Listello
ESA060 onwards
Code ESA030 ESA040 ESA050 ESA060 ESA080 ESA080 ESA100
D (mm) 2.25 3.25 4.25 6 8 8 10
Length (m) 2.5 2.5 2.5 2.5 2.5 2.5 2.5
ESA100 ESA120
10 12
2.5 2.5
ESA120 ESA150 ESA180 ESA225 2.7m NEW Code SIZE ESA067 ESA087 ESA107 ESA127 Formable Code EFA060 EFA080 EFA100 EFA120 EFA150 EFA180 Corner Pieces Code ESC082 ESC102 ESC122
12 15 18 22.5
91
Box Qty 20 20 20 20 20 10 20
2.5 2.5 2.5 2.5
Finish (images on page 92) 80 80 80 01,80,81,91 01,02,16,17,18,34,80,81,88,91,94 101 01,02,16,17,18,34,80,81,85,86,88,89 90,91,92,94,95,96,97,411,414,425,435 101 01,02,16,17,18,34,80,81,85,86,88,89 90,91,92,94,95,96,97,411,414,425,435 101 01,80,81,91,94 80,81,91 80,91
D (mm) 6 8 10 12
Length (m) 2.7 2.7 2.7 2.7
Finish 81,91 81,91,94 81,91,94 81,91,94
Box Qty 20 20 20 20
D (mm) 6 8 10 12 15 18
Length (m) 2.5 2.5 2.5 2.5 2.5 2.5
Finish 80 80 80,91 80,91 80 80
Box Qty 20 20 20 20 20 20
Finish 81,91,94 81,90,91,94,97 81,90,91,94,97
Pack Qty 2 2 2
D (mm) 8 10 12
+44 (0)1642 713000
info@genesis-gs.com
10 20 20 20 20 20
www.genesis-gs.com
Straight Metal Trim Aluminium Straight Edge & Formable Trim (finishes) 01 White
02 Matt
16 Black
17 Matt
18 Brushed
34 Soft
80 Mill
81 Matt
85 Pewter
86 Bright
88 Nickel
89 Bronze
90 Brushed
91 Bright
92 Matt
94 Brushed
95 Bright
96 Brushed
97 Earl
Silver
Nickel
White
Brass
Effect
Copper
Black
Copper
Black
Grey
Grey
Brass
Alu
Silver
101 Chrome Plated
NEW FINISH
411 Granite 414 Bath
Stone
NEW FINISH
425 Sand
Stone
NEW
435 Dark
NEW
FINISH
FINISH
Granite NEW FINISH
PROTECTIVE FILM EXCL. 80
Aluminium Medium Duty Trim 80 Mill
Aluminium 2.5mm
D 0.8mm 20mm
MT
Metal Trim & Listello
Code EMA080 EMA100 EMA120
D (mm) 8 10 12
+44 (0)1642 713000
Length (m) 2.5 2.5 2.5
Finish 80 80 80
info@genesis-gs.com
Box Qty 20 20 20
www.genesis-gs.com
92
Metal Trim Square Aluminium Contour Trim & Corners 81 Matt
Silver
W
D
91 Bright
1mm
Silver 27mm
PROTECTIVE FILM
Code TDG084 TDG104 TDG124 Corner Pieces Code ECG082 ECG102 ECG122
W x D (mm) 8x8 10 x 10 12 x 12
Length (m) 2.5 2.5 2.5
D (mm) 8 10 12
Finish 81,91 81,91 81,91
Box Qty 20 20 20
Finish 81,91 81,91 81,91
Pack Qty 2 2 2
MT
Metal Trim & Listello
Did you know?..
...following customer feedback, all our corners now come in packs of two!
Don't cut corners!
93
+44 (0)1642 713000
info@genesis-gs.com
www.genesis-gs.com
Square Metal Trim Aluminium Square Trim & Corners 10mm
D 1mm 27mm
PROTECTIVE FILM
Code TDP060 TDP080 TDP100
W x D (mm) 10 x 6 10 x 8 10 x 10
Length (m) 2.5 2.5 2.5
Finish 91,94 81,82,91,94,95,96 01,02,16,17,18,34,81,82,86,90,91,94, 95,96,97,411,414,425,435 101 01,02,16,17,18,34,81,82,86,90,91,94, 95,96,97,411,414,425,435 101 81,91,94
TDP100 TDP120
10 x 10 10 x 12
2.5 2.5
TDP120 TDP150
10 x 12 10 x 15
2.5 2.5
Corner Pieces Code EDP082 EDP102 EDP122 EDP152
D (mm) 8 10 12 15
Finish 81,82,91,94,95,96 01,16,17,18,81,82,90,91,94,95,96,97,101 01,16,17,18,81,82,90,91,94,95,96,97,101 81,91,94
Box Qty 20 20 20 10 20 10 20 Pack Qty 2 2 2 2
16 Black
17 Matt
18 Brushed
34 Soft
81 Matt
86 Bright
90 Brushed
91 Bright
94 Brushed
95 Bright
96 Brushed
97 Earl
Brass
White
Brass
411 Granite 414 Bath
Stone
NEW FINISH
Silver
425 Sand
NEW FINISH
+44 (0)1642 713000
Stone NEW FINISH
Black
Effect
Black
Copper
Grey
Copper
Silver
Grey
82 Anthracite
101 Chrome Plated
435 Dark
Granite NEW FINISH
info@genesis-gs.com
www.genesis-gs.com
94
MT
02 Matt
Metal Trim & Listello
01 White
Metal Trim Square Aluminium Slim Trim - Square 91 Bright
Silver
W
D
W
D
Code EAM080 EAM100
W x D (mm) 9x8 11 x 10
Length (m) 2.5 2.5
Finish 91 91
Box Qty 20 20
Aluminium Slim Square Edge Trim & Corners 91 Bright
5mm
Silver
TMG100/120 D
22mm 20mm
5mm 6mm
D
1mm
TMG050
MT
Metal Trim & Listello
PROTECTIVE FILM
Code TMG050 TMG100 TMG120 Corner Pieces Code EMG052 EMG102 EMG122
95
D (mm) 5 10 12
Length (m) 2.5 2.5 2.5
Finish 91 91 91
Box Qty 20 20 20
D (mm) 5 10 12
Type Int / Ext Int / Ext Int / Ext
Finish 91 91 91
Pack Qty 2 2 2
+44 (0)1642 713000
info@genesis-gs.com
www.genesis-gs.com
Square Metal Trim Aluminium Internal Square & End Caps 91 Bright
Silver
W Y D
W Y
1mm Z
Shown with ESA
Code EIK100 EIK120 End Caps Code ECK102 ECK122
W x D (mm) 11 x 10 13 x 12
Z (mm) 31 33
Y (mm) 3 3
Length (m) 2.5 2.5
D (mm) 10 12
Finish 91 91
Box Qty 20 20
Finish 91 91
Pack Qty 2 2
Aluminium Angle Trim - Slim
NEW PRODUCT
86 Bright
Brass
2mm 1mm W
D 1mm
91 Bright
Silver
D
18mm
MT
Metal Trim & Listello
Code EAD080 EAD100 EAD120
W x D (mm) 12 x 8 15 x 10 18 x 12
+44 (0)1642 713000
Length (m) 2.5 2.5 2.5
Finish 86,91 86,91 86,91
info@genesis-gs.com
Box Qty 20 20 20
www.genesis-gs.com
96
Metal Trim Round Aluminium Quadrant Trim & Corners
D 1mm 30mm
PROTECTIVE FILM EXCL. 80
NOT 80
Code EAQ060 EAQ080 EAQ100 EAQ120
D (mm) 6 8 10 12
MT
Metal Trim & Listello
External Corners Code D (mm) EAC062 6 EAC082 8 EAC102 10 EAC122 12
Length (m) 2.5 2.5 2.5 2.5
Finish 91 01,80,81,91,94 01,16,80,81,86,91,94 01,16,80,81,86,91,94
Finish 01,81,91 01,80,81,91,94 01,16,80,81,83,85,86,91,94 01,16,80,81,83,85,86,91,94
Pack Qty 2 2 2 2
01 White
16 Black
80 Mill
81 Matt
85 Pewter
86 Bright
91 Bright
94 Brushed
Brass
Alu
Silver
Silver
Internal Corners Code D (mm) EIQ082 8 EIQ102 10 EIQ122 12
Box Qty 20 20 20 20 Finish 81,91,94 81,86,91,94 81,86,91,94
Pack Qty 2 2 2
83 Matt
Brass
Effect
Solid Brass available upon request - lead times and MOQ's apply.
97
+44 (0)1642 713000
info@genesis-gs.com
www.genesis-gs.com
Round Metal Trim Aluminium Pro Trim & Corners 81 Matt
Silver
D 1mm
91 Bright
Silver 30mm
94 Brushed
PROTECTIVE FILM
Effect
Code ETA060 ETA080 ETA100 ETA120
D (mm) 6 8 10 12
External Corners Code D (mm) ETC062 6 EAC082 8 EAC102 10 EAC122 12
Length (m) 2.5 2.5 2.5 2.5
Finish 81,91 081,91,94 81,86,91,94 81,86,91,94
Finish 81,91 81,91,94 81,91,94 81,91,94
Pack Qty 2 2 2 2
Box Qty 20 20 20 20
Internal Corners Code D (mm) EIQ082 8 EIQ102 10 EIQ122 12
Finish 81,91,94 81,91,94 81,91,94
Pack Qty 2 2 2
Aluminium Round Edge 81 Matt
Silver
D
86 Bright
1.2mm
MT
Metal Trim & Listello
Brass 24mm
91 Bright
Silver
Code ERA080 ERA100 ERA120
D (mm) 8 10 12
+44 (0)1642 713000
Length (m) 2.5 2.5 2.5
Finish 91 81,86,91 81,91
info@genesis-gs.com
Box Qty 20 20 20
www.genesis-gs.com
98
Metal Trim Triangular Aluminium Angle Trim & Corners 81 Matt
Silver D
91 Bright
Silver
W
21mm
PROTECTIVE FILM
94 Brushed Effect
EIT
MT
Metal Trim & Listello
EET
Code EAT080 EAT100 EAT120 Corner Pieces Code EET082 EET102 EET122 EIT082 EIT102 EIT122
99
W x D (mm) 9x8 11 x 10 13 x 12
Length (m) 2.7 2.7 2.7
Finish 81,91,94 81,91,94 81,91,94
Box Qty 20 20 20
D (mm) 8 10 12 8 10 12
Type External External External Internal Internal Internal
Finish 81,91,94 81,91,94 81,91,94 81,91,94 81,91,94 81,91,94
Pack Qty 2 2 2 2 2 2
+44 (0)1642 713000
info@genesis-gs.com
www.genesis-gs.com
Metal Trim Aluminium Self Adhesive Internal Trim, Corners & Caps 81 Matt
Silver 15mm
91 Bright
Silver
15mm
EWE
EWI
EWC
Finish 81,91
Box Qty 20
Type Internal Corner External Corner End Caps
Finish 81,91 81,91 81,91
Pack Qty 2 2 2
info@genesis-gs.com
www.genesis-gs.com
MT
+44 (0)1642 713000
Length (m) 2.5
Metal Trim & Listello
Code D (mm) EWA150 15 Corner Pieces & End Caps Code D (mm) EWI150 15 EWE150 15 EWC150 15
100
Metal Trim Dividing Strips
W
W
W
D
20mm
D
D
3mm
EDA510 EDA310
EDA147
Aluminium Dividing Strip Code W x D (mm) EDA510 5 x 10 EDA147 14 x 8 EDA310 NEW 3 x 10 EDA408 22 x 9 Stainless Steel Dividing Strip Code W x D (mm) EDS209 20 x 9 SIZE
80 Mill
Alu
81 Matt
Silver
EDA408
EDS209
Length (m) 2.5 2.5 2.5 2.5
Finish 80 81 91 81,83,91
Box Qty 20 20 20 20
Length (m) 2.5
Finish 84,102
Box Qty 10
83 Matt
Brass Effect
84 Stainless 91 Bright Steel
Silver
102 Brushed
Stainless Steel
MT
Metal Trim & Listello
Solid Brass available upon request - lead times and MOQ's apply.
101
+44 (0)1642 713000
info@genesis-gs.com
www.genesis-gs.com
Stainless Steel Metal Trim Stainless Steel Straight Edge Trim (304 & 316) & Formable Trim 84 Stainless Steel
4mm D
102 Brushed
S. Steel 20mm
PROTECTIVE FILM EXCL. 102
Finish 84,102 84,102 84,102 84,102 84,102 84,102 84,102 84,102
Box Qty 10 10 10 10 10 10 10 10
Length (m) 2.5 2.5
Finish 84,102 84,102
Box Qty 10 10
Length (m) 2.5 2.5
Finish 84,102 84,102
Box Qty 10 10
MT
NEW
FINISHES
Length (m) 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5
Metal Trim & Listello
Stainless Steel - Grade 304 Code D (mm) ESS045 4.5 ESS060 6 ESS080 8 ESS100 10 ESS120 12 ESS150 15 ESS180 18 ESS225 22.5 Stainless Steel - Grade 316 Code D (mm) ESS310 10 ESS312 12 Formable Code D (mm) ESF100 10 ESF120 12
Plated Finish on Page 88
+44 (0)1642 713000
info@genesis-gs.com
www.genesis-gs.com
102
Metal Trim Stainless Steel Stainless Steel Angle Edge 84 Stainless Steel
2mm D
20mm
Code ETS045 ETS070 ETS100
D (mm) 4.5 7 10
Length (m) 2.5 2.5 2.5
Finish 84 84 84
Box Qty 10 10 10
Stainless Steel Square Edge Trim & Corners
NEW PRODUCT
84 Stainless Steel
W 3mm D 1mm
102 Brushed
Stainless Steel
28mm
PROTECTIVE FILM
MT
Metal Trim & Listello
EXCL. 102
Stainless Steel Square Edge Trim - Grade 304 Code W x D (mm) Length (m) Finish EQQ080 8x8 2.5 84,102 EQQ100 10 x 10 2.5 84,102 EQQ120 12 x 12 2.5 84,102 Stainless Steel Square Edge Trim - Grade 316 EQQ308 8x8 2.5 84,102 EQQ310 10 x 10 2.5 84,102 EQQ312 12 x 12 2.5 84,102 Stainless Steel Square Edge Trim Corners - Grade 304 Code D (mm) Finish EDQ082 8 84,102 EDQ102 10 84,102 EDQ122 12 84,102
NEW
FINISHES
103
Box Qty 10 10 10 10 10 10 Pack Qty 2 2 2
Plated Finish on Page 86 +44 (0)1642 713000
info@genesis-gs.com
www.genesis-gs.com
Stainless Steel Metal Trim Stainless Steel Quadrant Trim & Corners 84 Stainless Steel
D 1mm
102 Brushed
Stainless Steel
25mm
PROTECTIVE FILM
EXCL. 102
Stainless Steel Quadrant Trim - Grade 304 Code D (mm) Length (m) ESQ060 6 2.5 ESQ080 8 2.5 ESQ100 10 2.5 ESQ120 12 2.5 Stainless Steel Quadrant Trim - Grade 316 Code D (mm) Length (m) ESQ308 8 2.5 ESQ310 10 2.5 ESQ312 12 2.5 Stainless Steel Quadrant Trim Corners - Grade 304 Code D (mm) ECQ082 8 ECQ102 10 ECQ122 12
Finish 84,102 84,102 84,102 84,102
Box Qty 10 10 10 10
Finish 84,102 84,102 84,102
Box Qty 10 10 10
Finish 84,102 84,102 84,102
Pack Qty 2 2 2
MT
Metal Trim & Listello
+44 (0)1642 713000
info@genesis-gs.com
www.genesis-gs.com
104
Metal Trim Listello Stainless Steel Listello 84 Stainless Steel
8mm
102 Brushed
W
S. Steel
PROTECTIVE FILM
E I TH N
D
E
MA
UK
NESIS GE
Code LPS250 LPS400
W x D (mm) 25 x 8 40 x 8
Length (m) 2.5 2.5
Finish 84,102 84,102
Box Qty 10 10
Flat Line Listello 8mm
PROTECTIVE FILM
10mm
LFA100 8mm
MT
Metal Trim & Listello
20mm
LFA200 Code LFA100 LFA200
W x D (mm) 10 x 8 20 x 8
81 Matt
Silver
105
86 Bright
Brass Effect
Length (m) 2.5 2.5
91 Bright
Silver
+44 (0)1642 713000
Finish 81,86,91,94,101 91,94
Box Qty 20 20
94 Brushed 101 Chrome Effect
Plated
info@genesis-gs.com
www.genesis-gs.com
Listello Metal Trim Aluminium Listello 91 Bright
Silver
7mm 10mm
LPA100
94 Brushed Effect
7mm
25mm
LPA250
PROTECTIVE FILM
Code LPA100 LPA250
W x D (mm) 10 x 7 25 x 7
Length (m) 2.5 2.5
Finish 91,94 91,94
Box Qty 20 20
Finish 91 91 91
Box Qty 10 10 10
Glass Panel / Shadow Gap 91 Bright
Silver
12mm D
33mm
12mm
33mm
MT
Metal Trim & Listello
D
Code LGA080 LGA100 LGA125
D (mm) 8 10 12.5
+44 (0)1642 713000
Length (m) 2.5 2.5 2.5
info@genesis-gs.com
www.genesis-gs.com
106
Metal Trim Skirting Aluminium Clip On Skirting, Corners & End Caps 81 Matt
Silver
D
W
KRC
MT
Metal Trim & Listello
Code KAC710 External Corners Code KEC710 KIC710 End Caps Code KLC710 KRC710
107
W x D (mm) 10 x 70
KIC
KEC
D
Length (m) 2.5
KLC
Finish 81
Box Qty 10
W x D x L (mm) Description W 10 x 70 x 80 Pre-formed external corner 10 x 70 x 80 Pre-formed internal corner
Finish 81 81
Pack Qty 1 1
W x D (mm) 10 x 70 10 x 70
Finish 81 81
Pack Qty 1 1
Description Left end cap Right end cap
+44 (0)1642 713000
info@genesis-gs.com
www.genesis-gs.com
Skirting
Metal Trim
Aluminium Skirting, Corners & End Caps 11 Grey 3mm
81 Matt
Silver D
11mm
KAA
KPI
info@genesis-gs.com
Finish 81 81 81
Box Qty 10 10 10
Finish 11 11 11 11 11 11 11 11 11
Box Qty 20 20 20 20 20 20 20 20 20
www.genesis-gs.com
MT
+44 (0)1642 713000
KPE
Metal Trim & Listello
Code D (mm) Length (m) KAA607 60 2.7 KAA807 80 2.7 KAA107 100 2.7 P.V.C. Corners & End Caps Code Description KPE600 External Corner for KAA600 KPI600 Internal Corner for KAA600 KPC600 Pair End Caps (L/R) for KAA600 KPE800 External Corner for KAA800 KPI800 Internal Corner for KAA800 KPC800 Pair End Caps (L/R) for KAA800 KPE100 External Corner for KAA100 KPI100 Internal Corner for KAA100 KPC100 Pair End Caps (L/R) for KAA100
KPC
108
Metal Trim Edge Protection Aluminium Retro-Fit Corner Protector 81 Matt
W
Silver
1mm
91 Bright
Silver
D
Length (m) 2.5 2.5 2.5
Self-Adhesive Yes Yes No
Finish 81,91 81,91 81
Box Qty 20 20 20
Stainless Steel Retro-Fit Corner Protector - Self Adhesive MA
84 Stainless
NESIS GE
E I TH N
D
W
Steel
UK
W x D (mm) 10 x 10 25 x 25 25 x 25
E
Code EAA100 EAA250 EAA254
10mm
102 Brushed
Stainless Steel
Length (m) 2.5 2.5 2.5 2.5
Finish 84,102 84,102 84,102 84
Box Qty 10 10 10 10
Stainless Steel Protector
NESIS GE MA
E I TH N
D
84 Stainless
UK
W x D (mm) 15 x 15 30 x 30 50 x 50 50 x 50
W
Steel
E
Code EAS154 EAS304 EAS504 EAS515
D
NEW PRODUCT
MT
Metal Trim & Listello
D
W
102 Brushed
Stainless Steel D
Code EPS310 EPS312 EPS510 EPS512
109
W x D (mm) 30 x 10 30 x 12 50 x 10 50 x 12
Length (m) 2.5 2.5 2.5 1.5
+44 (0)1642 713000
Finish 84,102 84,102 84,102 84,102
info@genesis-gs.com
Box Qty 10 10 10 10
www.genesis-gs.com
Panel Profiles info@genesis-gs.com
www.genesis-gs.com
PP
+44 (0)1642 713000
Panel Profiles
The use of PVC Wall Cladding in Bathrooms is a trend not to be ignored. Large continuous format panels with a dry installation make it perfect for quick, commercial or budget installations and now Genesis have the range of accessory profiles to suit. Offering profiles for 7.5mm, 10.5mm and 11.5mm panels in Aluminium and a number of popular finishes to give your installation The Perfect Finish.
110
Panel Profiles End - U 01 White D
81 Matt
Silver
W
82 Anthracite
91 Bright
Silver
Code PUA708 PUA108 PUA118
W x D(mm) 9 x 7.5 9 x 10.5 6 x 11.5
Length (m) 2.4 2.4 2.4
Finish 01,81,82,91 01,81,82 91
Box Qty 50 50 50
Finish 01,81,82,91 01,81,82 91
Box Qty 25 25 25
External 01 White W
81 Matt
Silver D
82 Anthracite
91 Bright
PP
Panel Profiles
Silver
Code PXA708 PXA108 PXA118
111
W x D (mm) 26 x 7.5 30 x 10.5 30 x 11.5
Length (m) 2.4 2.4 2.4
+44 (0)1642 713000
info@genesis-gs.com
www.genesis-gs.com
Panel Profiles H - Joint 01 White D
81 Matt
Silver
W
82 Anthracite
91 Bright
Silver
Code PHA708 PHA108 PHA118
W x D (mm) 10 x 7.5 10 x 10.5 11 x 11.5
Length (m) 2.4 2.4 2.4
Finish 01,81,82,91 01,81,82 91
Box Qty 50 50 50
Finish 01,81,82,91 01,81,82 91
Box Qty 25 25 25
Internal 01 White D
81 Matt
Silver
W
82 Anthracite
91 Bright
Silver
+44 (0)1642 713000
Length (m) 2.4 2.4 2.4
info@genesis-gs.com
www.genesis-gs.com
PP
W x D (mm) 10 x 7.5 15 x 10.5 15 x 11.5
Panel Profiles
Code PIA708 PIA108 PIA118
112
Panel Profiles Base Seal 01 White
82 Anthracite
81 Matt
91 Bright
Silver
Panel silicone sealant
Silver W
Sealant
D
Code PBA708 PBA108
W x D (mm) 14 x 7.5 14 x 10.5
Length (m) 2.4 2.4
Finish 01,81,82,91 01,81,82,91
Box Qty 50 50
Retro-Fit 01 White
91 Bright
Silver
25mm
81 Matt
25mm
Silver
Code PRA258
W x D (mm) 25 x 25
Length (m) 2.4
Finish 01,81,91
Box Qty 50
Scotia Retro Fit 01 White
91 Bright
Silver
30mm
81 Matt
Silver
PP
Panel Profiles
19mm
Code PSA308
113
W x D (mm) 30 x 19
Length (m) 2.4
+44 (0)1642 713000
Finish 01,81,91
info@genesis-gs.com
Box Qty 50
www.genesis-gs.com
Marketing
Marketing A vast range of eye-catching marketing materials are available to help promote your Genesis products, from robust display stands that offer an excellent way of displaying full length trims to smaller point of sale displays. Promotional items that help to represent the Genesis brand by combining functionality with advertising with such items as mugs, pens, calendars, note pads etc.
M
114
Marketing
Bespoke marketing materials are available on request. +44 (0)1642 713000 info@genesis-gs.com www.genesis-gs.com
Display Stands Z103 1m Maxi Stand
2200 mm
600mm
1000mm
M
Marketing
• 24 hooks (clips onto top of stand 2 x 12) suspends profiles • 10 euro hooks (for tools or corner pcs) • Divider bar clips onto back to divide profiles Code • Each hook holds on average 10 profiles Z103 • 50/50 Split 120 profiles and tools Z112 Z151 • 240 profiles
115
+44 (0)1642 713000
Description 1m Genesis Display Euro Hooks (double prong) Replacement Header
info@genesis-gs.com
Qty 1 10 1
www.genesis-gs.com
Display Stands Z100 Mini Stand
2200 mm
600mm
600mm
• A bespoke unit to display the Genesis range of tools • A simple grid system to display products • Supplied with a display tray and 20 euro hooks Code • Ideal for hanging tools Z100 Z112 • 15 profile location points
www.genesis-gs.com
116
M
info@genesis-gs.com
Qty 1 10 Marketing
+44 (0)1642 713000
Description Tool Stand Euro Hooks (double prong)
Display Stands Z110 1m Deluxe Stand
2300 mm
600mm
1000mm
M
Marketing
• Grid unit with squares for Euro hooks, complete with 12 Euro hooks, 4 dividers and integral price tags • Rubber mat and specially strengthened base ideal for Metal profiles • Profiles are simply leaned against the back of the display and rested on the rubber mat on the base • Works on its own or combined to form a run of displays for larger showrooms • Dividers create 18 sections on this display
117
+44 (0)1642 713000
• Each section holds on average 20 profiles depending on the profile shape and size • The display unit can also be slit 50/50 to display 9 divided sections of profiles and then use the euro hooks to display tools on the other half of the stand. If used this way the stand will hold approximately 180 profiles • If all 24 divider spaces are used approximately 360 profiles can be displayed • Complete assembly instructions are included with each display stand
info@genesis-gs.com
www.genesis-gs.com
Display Stands Personalised Samples Panel for Z110
LOGO YOURRE HE !
YOUR LOGO HERE!
YOUR LOGO HERE!
A brand-new stand attachment is available for the Z110, offering an installed vision of the 4 profile designs offered by Genesis; Triangular, Square, Straight and Round. The Z109 also acts as a sales aid for highlighting and upselling the use of corner pieces to clients and homeowners allowing them to keep their options open on design and finish. Code Z110 Z111 Z113 Z109 Z109-BOARD Z109-BESPOKE Z420
Description Lean back Display Unit Single prong hooks 300mm Extension Framework (board not included) Genesis Branded Board Personalised Board Replacement Header
Qty 1 10 1 1 1 1 1
www.genesis-gs.com
118
M
info@genesis-gs.com
Marketing
+44 (0)1642 713000
YOUR LOGO HERE !
Stands / Signs Transition Stand
External Banner
NEW DESIGN
Stocked Here 1290 mm
www.genesis-gs.com Art No.: Z880
Code Z880
Description External Banner 0.6 x 1.8 m
Qty 1
Genesis Logo Mat
340mm
510mm
Code Z703
Description Genesis Logo Mat 90 x 60 cm
Qty 1
â&#x20AC;˘ 11 hooks to hold Genesis 0.92m lengths of transition profiles â&#x20AC;˘ Comes complete with Genesis header
M
Marketing
Code Z015
119
Description Transition Stand
+44 (0)1642 713000
Qty 1
info@genesis-gs.com
www.genesis-gs.com
Code Z870 Z871 Z424 Z425 Z428 Z429 Z430
Entrance Matting
www.genesis-gs.com
7 Ellerbeck Way Stokesley North Yorkshire TS9 5JZ
Movement Joints & Step Edges The samples inside are just a selection of our extensive range. Please check out our website to see our full compliment of profiles.
More step edges available online
More movement/structural joints available online
For more information contact Genesis today
Transitions, Ramps
Tel: +44 (0)1642 713000 Email: info@genesis-gs.com
www.genesis-gs.com & Covers
www.genesis-gs.com
P.V.C. Profiles & Finishes The samples inside are just a selection of our extensive P.V.C. range. Please check out our website to see our full compliment of P.V.C. profiles.
More P.V.C. profiles available online
For more information contact Genesis today
Movement Joints
Edge Protection & Skirting The samples inside are just a selection of our extensive range. Please check out our website to see our full compliment of profiles.
More skirting and edge protection profiles available online
For more information contact Genesis today
P.V.C. Profiles
Tel: +44 (0)1642 713000 Email: info@genesis-gs.com
Tel: +44 (0)1642 713000 Email: info@genesis-gs.com
www.genesis-gs.com & Step Edges
www.genesis-gs.com & Finishes
www.genesis-gs.com
www.genesis-gs.com
Genesis Global Systems Ltd
Genesis Global Systems Ltd
Genesis Global Systems Ltd
Genesis Global Systems Ltd
7 Ellerbeck Way Stokesley North Yorkshire TS9 5JZ
7 Ellerbeck Way Stokesley North Yorkshire TS9 5JZ
7 Ellerbeck Way Stokesley North Yorkshire TS9 5JZ
7 Ellerbeck Way Stokesley North Yorkshire TS9 5JZ
www.genesis-gs.com
120
M
www.genesis-gs.com
Marketing
info@genesis-gs.com
Edge Protection & Skirting
Art No. Z430
Art No. Z429
Art No. Z428
Art No. Z425
Art No. Z425
NEEDED
+44 (0)1642 713000
Edge Protection & Skirting
For more information contact Genesis today
www.genesis-gs.com
Genesis Global Systems Ltd www.genesis-gs.com
h Yorkshire TS9 5JZ
More transitions, ramps and covers available online
Tel: +44 (0)1642 713000 Email: info@genesis-gs.com
www.genesis-gs.com
d
The samples inside are just a selection of our extensive range. Please check out our website to see our full compliment of profiles.
P.V.C. Profiles & Finishes
For more information contact Genesis today Tel: +44 (0)1642 713000 Anti Slip & Tactile Range Email: info@genesis-gs.com
2 713000 nesis-gs.com
Transitions, Ramps & Covers
Movement Joints & Step Edges
The samples inside are just a selection of our extensive range. Please check out our website to see our full compliment of profiles.
Transitions, Ramps & Covers
Anti Slip & Tactile Range
esis-gs.com
NEW PRODUCT
Description RezTredÂŽ and Accessibility Entrance Matting Metal Profiles Ramps and Transitions Movement Joints & Nosing PVC Profiles Edge Protection and Skirting
Anti Slip & Tactile Range
mation contact Genesis today
Samples Folders
Anti Slip & Tactile Range
ile Range
ust a selection of our extensive range. bsite to see our full compliment of profiles.
Display / Samples
Display / Samples Samples Boards
Code Z422 Z865 Z889 Z890 Z895 Z897
NEW DESIGN
Description Self Adhesive Panel Profiles Transitions Board Metal Trim Samples Board (1) PVC Trim Samples Board Metal Trim Samples Board (2)
M
Marketing
Code Z888
121
+44 (0)1642 713000
info@genesis-gs.com
Description Triangular POS Board
www.genesis-gs.com
Display / Samples Display Modules • Individual modules constructed with ceramics specified by you and using prescribed Genesis profiles to create the perfect point of sale display • These modules have been designed to show a selection of Genesis Profiles and perfectly illustrate the function of the product as well as the aesthetics. • Eye-catching and perfect for displaying corner pieces. Code Z123
Description Display Module
Qty 1
Sample Cases
NEW DESIGN
Code Z751 Z752
Description Genesis Flooring Sample Case Contract Tiling Sample Case
www.genesis-gs.com
122
M
info@genesis-gs.com
Marketing
+44 (0)1642 713000
Qty 1 1
Promotional Items Catalogue & Price List
NEW DESIGN
Wall Chart Always one step ahead...
65mm 60mm
33mm
31mm
65mm 60mm
33mm
31mm
59mm
65mm
65mm
60mm
Slimline Aluminium Nosings 56mm
Heavy Duty Aluminium Nosings
57mm
60mm
57mm
33mm
Hard Nose P.V.C 31mm
Slimline
65mm
59mm
Heavy Duty
31mm
65mm
32mm
NSL01
NSL02
NSL03
40mm
32mm
32mm
NHD05
60mm
NHD07
40mm
71mm
31mm
33mm
NHD06
NHD08
32mm
85mm
NSL09
NSL16
60mm
31mm
33mm
65mm
33mm
NHD22
32mm
32mm
31mm
NHD24
NSL21 DDA Compliant
Heavy Duty Ceramic Tile-In Nosing 60mm
67mm
65mm
NHD11
31mm
93mm
65mm
46.1
46 Midnight Grey 47 Yellow D
NIA50 80 Mill Aluminium
NTC DDA Compliant
55mm
ATC DDA Compliant
55mm
78.9
P.V.C Channel 16 Black 20 Brown 46 Midnight Grey
•S SE U
NAL U ER
48 Cobalt Blue
20mm
D
BLE F ITA
NSL23 with silicone carbide insert
EX OR T
33mm
647 Yellow RezTred®
44 Ice Grey 74mm
D
91mm
NHD13 35mm
68mm
40mm
4.8 18.2
16 Black
32mm
74mm
NHD12
32mm
69mm
NSL25
58mm
82.7
616 Black 643 Dolphin Grey
01 White 32mm
31mm
32mm
55mm
75mm
NSL28
60mm
91mm
NSL26
55mm
75mm
NTC ATC XF/S LNR P.V.C
Tredsafe®
55mm
67mm
55mm
NSL27
30.4 13.5
601 White
DDA Compliant
58mm
AHD
12.8 55.7 9.2
52 Lime 109 Sky Blue 113 Tangerine
DDA Compliant 55mm
57mm
NSL20 DDA Compliant
55mm
NHD
41.1 53.2 6.3 10.6 27.6 42.1
47 Yellow 48 Cobalt Blue
31mm
60mm
ASL
79.9 4.5
43 Dolphin Grey 44 Ice Grey 46 Midnight Grey
65mm
59mm
72mm
DDA Compliant 55mm
56mm
NSL19 DDA Compliant
32mm 65mm
59mm
NHD17 66mm
NSB
31mm
66mm
NSL15 32mm
9.1
28 Green 30 Red
60mm
NSL29
16 Black
27 Canvas
65mm
85mm
32mm
40mm
20 Brown 25 Beige
NHB
32mm 33mm 60mm
LRV
01 White
65mm 65mm
33mm
31mm
NSR
31mm
55mm
NSL10
SINGLE DOUBLE SINGLE DOUBLE SINGLE DOUBLE SINGLE DOUBLE
Standard
NHP
60mm
33mm 59mm
31mm
85mm
32mm
NSL
Insert
65mm
60mm
NSP
63mm
Finishes & Inserts
33mm
31mm
70mm
Anodising
3.5mm
16 Black
40mm
NNL01 Carpet Connector
81 Matt Silver
NNL02 Ramp Connector
86 Bright Brass 91 Bright Silver
Standard - NISL38
Aluminator® Slimline Aluminium Nosings 56mm
32mm
57mm
57mm
ASL01
Aluminator® Heavy Duty Aluminium Nosings
ASL02
62mm
60mm
ASL03
40mm
32mm
32mm
70mm
AHD05
30.5mm
Insert NISL50
XFS01
62mm
Fits NSL Single Channel
38mm
External No
External No
2mm
50mm 2mm
56mm
3mm
30mm
AHD08
Fits NSL Twin Channel
Standard - NISL50
3mm
XF05
71mm
3mm
Standard - NIHD38
AHD06
32mm 85mm
ASL09
56mm
3mm
30.5mm
AHD07
63mm 40mm
85mm
32mm
Insert NISL38
Frontier XF/S
XF06
30mm
Insert NIHD38
XFS02
Fits NHD Twin Channel
38mm
External No
3.4mm
55mm 32mm
ASL10
85mm
Standard - NIHD50
91mm
ASL29
66mm
40mm
32mm
ASL15
Insert NIHD50
AHD11
TreadLite
AHD13
60mm
35mm
Insert NITR50
38mm
External Yes
3mm
50mm
Fits NSL, NHD Single Channel
External Yes
Fits Twin Channel
External Yes
Fits Single Channel
External Yes
2mm
External No
3.5mm
3mm
91mm
AHD23 with silicone carbide insert
• SU SE
NAL U ER
33mm 72mm
EX OR T
AHD17 DDA Compliant 55mm
RezTred®
BLE F ITA
ASL26
Fits NSL, NHD Twin Channel
Tredsafe - NITR50
68mm
67mm
55mm
13mm
35mm
LNR22
13mm
4.7mm
4.7mm
Insert RezTred®
38mm 2mm
55mm
75mm
LDC250 Clear
AHD22 DDA Compliant
75mm
ASL27
55mm
RezTred® Insert RezTred®
50mm
Flatlite® Light Strip - LFL130
ASL25
58mm
LDF250 Frosted
60mm
69mm
ASL28
58mm
Insert NITR38
91mm
91mm
35mm 67mm
ASL21 DDA Compliant
50mm 3.4mm
Tredsafe® - NITR38 AHD12
32mm
ASL16 32mm 57mm
ASL20 DDA Compliant 55mm
External No
93mm
66mm
32mm 56mm
ASL19 DDA Compliant 55mm
Fits NHD Single Channel
55mm
AHD24 DDA Compliant
01 White
28 Green
30 Red13mm
47 Yellow
4.7mm
4.7mm
40mm
5013mm Lilac
109 Sky Blue
113 Tangerine
Castellated - NIA50 Insert NIA50
Fits NHD Single Channel
50mm
+44 (0)1642 713000 info@genesis-gs.com
www.genesis-gs.com
P.V.C. Trim • Stair Nosings • Movement Joints • Entrance Matting • Transitions • Edge Protection • Metal Profiles • Tactiles • Tools
Code Z313 Z312 Z405
Description Genesis Catalogue Genesis Price List Contract Flooring Price List
Qty 50 50 50
Code Z324
Description Wall Chart (A1)
2019 Desk Calendar Travel Mug
Code Z802
Code Z-CALENDAR
Description Insulated Travel Mug
NEW DESIGN
Description 2019 Desk Calendar
Pen Note Pads
M
Marketing
Code Z602 Z501
123
NEW DESIGN
Description A4 Note Pad A6 Note Pad
+44 (0)1642 713000
Code Z801
info@genesis-gs.com
Description Pen
www.genesis-gs.com
Index Stair Nosings
2 – 23
Technical Information Insert Options NXF/S Slimline Heavy Duty P.V.C Angles & Accessories Template
3-6 7-8 10 11-14 15-18 19-20 21 23
Step Edges
24 – 31
Heavy Duty / Slimline Retro Fit Tile In
Vision Introduction Stair Nosing Skirting Edge / Multibox TredLite Lighting Systems Drivers / Accessories
Anti-Slip, Matting & Access RezTred® Tactiles Entrance Matting
Transitions, Covers & Ramps Self Adhesive Fast Fit Invisible System Vinyl Tread Z-Bar Clip Tops Tile-In & Access Ramps Reducers
Movement joints Technical Information Compression Joints PVC Tile Joints Heavy Duty
Structural Joints Heavy Duty Covers
+44 (0)1642 713000
25-26 27-28 29-31 NEW SECTION
32 – 45 33-34 35-36 37 38 39 40-42 43-45
46 – 53 47-48 49-51 51-53
54 – 63 55 56-58 59 60 61 61-63 63
64 – 71 65-66 67 68 69-70
72 – 75
P.V.C Trim
76 – 82
Round Edge Corners Internal Cove Straight and Square Bath Seals Cap Tile / Tile to Vinyl Eco Trim Corner Protector
77-78 78 79 80-81 81 82 82
Flexibles
83 – 85
Skirting Cove Former Dim Strip Capping Strip
Luxe
84 84 85 85 NEW SECTION
86 – 89
Swarovski Crystals Plated Stainless Steel Solid Brass
87 88 89
Metal Trim & Listello
90 – 109
Aluminium Straight Aluminium Square Aluminium Round Aluminium Triangular Aluminium Cove Dividing Strips Stainless Straight Stainless Angle Stainless Square Stainless Round Listello Shadow Gap / Glass Panel Aluminium Skirting Corner Protectors
Panel Profiles End U & External H Joints & Internal Base Seal, Retro Fit & Scotia
Marketing Display Stands Display / Samples Promotional Items
91-92 93-96 97-98 99 100 101 102 103 103 104 105-106 106 107-109 109
110 – 113 111 112 113
114 – 123 115-119 120-122 123
73-74 75
info@genesis-gs.com
www.genesis-gs.com
124
Index - Profiles AHB 19 AHD 17 AHP 19 ASB 19 ASL 13 ASP 19 ASR 19 ATC 25 ATS 26 CAS 53 EAA 109 EAC 97,98 EAD 96 EAM 95 EAQ 97 EAS 109 EAT 99 ECG 93 ECK 96 ECQ 104 ECT 82 EDA 101 EDP 94 EDQ 88,103 EDS 101 EET 99 EFA 91 EFU 81 EIK 96 EIQ 97,98 EIT 99 EM89 51 EMA 92 EMG 95 EPS 109 EQQ 88,103 ERA 98 ERP 82 ESA 87,91 ESB 89 ESC 91 ESF 102 ESP 79 ESQ 104 ESS 88,102 ETA 98 ETC 98 ETI 78 ETP 78
125
ETR 77 ETS 103 EVC 81 EVT 81 EVU 81 EWA 100 EWC 100 EWE 100 EWI 100 FTCH 50 FTP 50 FTSS 50 GC27 75 GC28 75 GFS 73 GFG 73 KAA 108 KAC 107 KCOV 84 KCS 85 KEC 107 KIC 107 KLC 107 KLD 37 KPC 108 KPE 108 KPI 108 KRC 107 KSI 84 KSO 84 LCT 43 LD12 43 LDD 43 LDP 44 LDW 44 LED 43,44 LFA 105 LFL 40 LGA 106 LGB 43,44 LGB12 42 LLA 39 LNR 39 LPA 106 LPS 105 LUND 43 MCA 67 MCB 67 MCS 67
+44 (0)1642 713000
MHS 69 MLB 68 MLT 68 MMA 70 MSA 70 MSI 70 MSS 69 MVP 67 NALR 36 NAS 27,55 NAT 29 NEC 35,36 NFA 29 NHB 19 NHD 15 NHP 19 NIA 8 NIB 29 NIHD 8 NIS 8 NITR 8 NLC 29 NLD 38 NLM 28 NLT 30 NPC 37,38 NRA 27 NRE 28 NRES 48 NSA 21 NSB 19 NSL 11 NSLR 35 NSP 19 NSR 19 NSS 30 NTAB 21 NTC 25 NTL 21 NTS 26 NUC 29 NXF/S 10 PBA 113 PCL 78 PDL 77 PDM 77 PDP 77 PDX 77 PHA 112
info@genesis-gs.com
PIA 112 PRA 113 PSA 113 PTL 80 PTP 79 PTR 80 PTS 80 PUA 111 PXA 111 R61 53 R80 52 RAA 62 RAD 63 RAR 63 RDIM 85 RSA 62 RSS 61 RUA 62 SBS 80 SMP 80 SMT 80 SPS 80 SRE 81 SRI 81 SRP 81 SRT 81 SSP 80 TAS 55 TAV 55 TBAS 61 TCC 56-57 TCG 56-57 TCR 57 TCS 56 TDB 89 TDG 93 TDP 87,94 TGA 60 TGS 60 TLD 38 TMG 95 TPP 79 TSC 59 TSL 59 TTC 57 TTG 57 TTOP 61 TUC 38 TVA 63
www.genesis-gs.com
Conversions Depth
Tile Calculator Imperial (Inches)
Tile Size
Tiles / Sq Mtr
6
1/4"
100mm x 100mm
100
8
5/16"
150mm x 150mm
44
3/8"
165mm x 165mm
37
200mm x 100mm
50
200mm x 200mm
25
250mm x 200mm
20
Metric (mm)
10 12
1/2"
15
5/8"
18
3/4"
22.5
9/10"
Length
280mm x 280mm
13
300mm x 100mm
33.33
300mm x 150mm
44
300mm x 200mm
16.67
300mm x 300mm
11
305mm x 305mm
10.75
310mm x 310mm
10.5
316mm x 316mm
10
330mm x 250mm
12
330mm x 330mm
9
Metric (M)
Imperial (Feet)
0.92
2'11"
1.7
5'6"
1.8
5'10"
333mm x 333mm
9
1.85
6'1"
400mm x 200mm
12.5
2
6'6"
400mm x 300mm
8
2.46
8'1"
400mm x 400mm
6.25
2.5
8'2"
445mm x 445mm
5
2.6
8'6"
450mm x 300mm
7.5
2.7
8'10"
2.77
9'
500mm x 500mm
4
2.8
9'1"
600mm x 300mm
5.55
3
9'10"
600mm x 400mm
4
3.22
10'6"
600mm x 600mm
2.78
3.4
11'2"
610mm x 310mm
5.25
15
49'2"
610mm x 410mm
4
20
65'7"
800mm x 800mm
1.56
903mm x 305mm
3.5
1000mm x 500mm
2
1000mm x 1000mm
1
+44 (0)1642 713000
info@genesis-gs.com
450mm x 450mm
5
490mm x 490mm
4.17
www.genesis-gs.com
126
Telefon: 08 96 70 44 Email: info@tebo.se
www.tebo.se TEBO Byggtillbehรถr AB - Blygatan 5 - 195 72 - Rosersberg