4:10 PM
The Influence of Microstructure and Composition on the Machinability of Al-Si Alloys: Yasser Zedan1; A.M. Samuel1; Fawzy Samuel1; S. Alkahtani2; 1UQAC; 2Salman Bin Abdulaziz University, AlKharj, Saudi Arabia
4:30 PM
Cancelled: Effects of Electric Currents on the Mechanical Behavior of Two Different Aluminum Alloys under Quasi-Static Uni-Axial Tensile Loads: Jeong-Jin Seo1; Jae-Hun Roh1; Yong-Ha Jeong1; Sung-Tae Hong1; John Roth2; 1University of UIsan; 2Penn State Erie, The Behrend College
4:50 PM
Modeling of Transients as a Response to Changes in Strain-Path of Commercially Pure Aluminium: Tomas Manik1; Bjørn Holmedal1; Odd Sture Hopperstad1; 1Norwegian University of Science and Technology
Novel Materials 3
Room: Dowd • University Student Center 2:00 PM
Invited: Enhanced Performance of Layered/Laminated Aluminum Systems: John Lewandowski1; 1Case Western Reserve University
2:40 PM
Microstructures and Mechanical Properties of Al-Al2O3 Composites Processed by Disk-HPT and Ring-HPT: Maki Ashida1; Zenji Horita1; 1Kyushu University
3:00 PM
Break
3:30 PM
Powder Metallurgy of High Strength Al84Gd6Ni7Co3 Gas-atomized Powder: Prashanth K G1; K.B. Surreddi2; Sergio Scudino1; Zhi Wang1; D. J. Sordelet3; Jürgen Eckert1; 1IFW Dresden; 2Chalmers University of Technology; 3Advanced Materials Technology Group, Caterpiller Inc.
3:50 PM
Advanced Class of FML on the Base Al-Li Alloy 1441 with Lower Density: Vladislav Antipov1; Olga Senatorova1; Nataly Lukina1; 1FSUE VIAM
4:10 PM
The Preparing Technology of Cu-Al Dual Metal Composite Material via Electrodeposition Method: Yihan Liu1; Jing Li1; Ming Zhao1; 1Northeastern University
4:30 PM
Cancelled: Properties of Aluminum Based Magnetic Materials Produced by Compressive Torsion Processing: Gaku Sogabe1; Yuji Kume2; Makoto Kobashi2; Naoyuki Kanetake2; 1Nagoya University ; 2Nagoya University
4:50 PM
Solute Distribution and Mechanical Properties of Ultra-Fine-Grained Al-Mg Alloys: Richard Karnesky1; Nancy Yang1; Chris San Marchi1; Troy Topping2; Zhihui Zhang2; Ying Li2; Enrique Lavernia2; 1Sandia National Laboratories; 2University of California, Davis
Phase Transformations Keynote
Room: McConomy Auditorium • University Student Center 1:15 PM
Keynote: Nanocluster Formation Behavior in Al-Zn-Mg Alloys with Microalloying Elements and Improved Mechanical Properties: Tatsuo Sato1; Tomo Ogura2; 1Tokyo Institute of Technology; 2Osaka University
Phase Transformations 3
Technical Session Listing
Room: Connan • University Student Center
22
2:00 PM
The Effect of Natural Aging on Quench Sensitivity in Al-Mg-Si Alloys: Katharina Strobel1; Mark Easton1; Lisa Sweet1; Nick Parson2; 1CAST CRC - Monah University; 2Rio Tinto Alcan
2:20 PM
Thermodynamics of Al3Li Nano-Clusters in an Aluminum Solid Solution: Christophe Sigli1; Joël Lépinoux2; 1Constellium CRV; 2SIMAP INP Grenoble
2:40 PM
The Effect of Cu and Cr on Clustering and Precipitation in Al-Mg-Si Alloys: Zeqin Liang1; Cynthia Sing Ting Chang1; John Banhart1; Jürgen Hirsch1; 1Helmholtz Center Berlin for Material and Energy
3:00 PM
Break
3:30 PM
Influence of Mg and Si on Cluster Formation in Al-Mg-Si Alloys Studied by Positron Annihilation Lifetime Spectroscopy: Meng Liu1; Yong Yan2; Zeqin Liang1; Cynthia Chang1; John Banhart1; 1Helmholtz Centre Berlin for Materials and Energy; 2 Technische Universität Berlin
3:50 PM
Microstructural Characterization of Flexcast® Al-Mg Alloys with Sc and Zr Additions: Dae Hoon Kang1; Mojan Sohi2; Hashem Mousavi Anijdan1; Nitin Singh1; Mark Gallerneault1; 1Novelis Inc.; 2University of British Columbia
4:10 PM
Application of an Isothermal Calorimetry Technique to Determine TTP Diagrams for AA6xxx Alloys: Leo Colley1; Nitin Singh1; Cyrille Bezençon1; 1Novelis Inc.
4:30 PM 4:50 PM
Influence of Chemical Composition on Aging Property of 7204 Aluminum Alloy: Tadashi Minoda1; Hideo Yoshida1; Sumitomo Light Metal Industries, Ltd.
1
Transforming of the Morphology of Iron Phases in Aluminum Alloys: Vladimir Cheverikin1; Vadim Zolotorevskiy1; Alexandra Khvan1; 1National University of Science and Technology “MISiS”