1149 Barwil-VentedTaps-final:Layout 1 04/09/2009 4:05pm Page 1
By Appointment to Her Majesty Queen Elizabeth II Manufacturer of Kitchen & Bathroom Taps & Mixers Barber Wilsons & Co. Ltd.
V E N T E D WAT E R F I T T I N G S F O R U S E W I T H G E Y S E R T Y P E I N S TA L L AT I O N S
1149 Barwil-VentedTaps-final:Layout 1 04/09/2009 4:05pm Page 2
Vented Taps for use with geyser type installations
Regent (R)
Regent with ceramic disc (RCD)
Mastercraft (MC)
1890’s (GA)
1890’s with ceramic disc (GCD)
Regent with china lever handles (RFC)
Contemporary Q range
Lever (HEC-HFC)
Under-sink single point water heaters require taps with “open atmosphere” outlets known as vented taps. If a conventional tap were connected to such a water heater, a dangerous and potentially explosive situation could develop should the water heater malfunction and overheat. Vented taps control the flow of water to the inlet of the water heater rather than from the outlet. Barber Wilsons is aware that there is a need for a range of
luxury taps and mixers for installations of this nature where a “top of the market” appearance is required. All of the taps and mixers in this brochure come from our standard catalogue and have been specially adapted to meet this criterion. They are also easily serviceable when necessary and are fitted with state of the art internals. Styles available: The 1890s (GA) range has the original exposed top works, with traditional rubber tap washers.
An alternative to this style is the Regent (R) range with “easyclean” shrouded head parts. The code numbers for the Regent range are the same as the 1890’s range but are prefixed with the letter ‘R’instead of ‘GA’. For most Regent and GA styles we can now supply ceramic disc headworks. Regent ceramic disc (RCD) and GA ceramic disc (GCD). These give traditional styling with state of the art ceramic disc internals.
The Mastercraft (MC) range is based on our original 1930’s design and incorporates a stylish Art Deco theme of hexagonal capstans, shrouds and spouts. Again, the code numbers are the same as the 1890’s range but are prefixed with the letters ‘MC’ instead of ‘GA’. Mastercraft is not available with ceramic disc headworks. Throughout this catalogue taps which are available with ceramic discs are labelled with the suffix CD.
1149 Barwil-VentedTaps-final:Layout 1 04/09/2009 4:05pm Page 3
2123G (GA shown) Also available R GCD RCD 1⁄2" basin taps with 3" nose. 2124G (GA shown) 1⁄2" basin taps with 4" nose. 2123G
Finish Chrome/Nickel Inca
Pair (Ex VAT) £193.00 £229.00
2124G
75 (3”) 100 (4”)
Ordering Order code format:
130 (51/8”)
Style RCD
Item code 2123G
3
Finish NI FLANGE 48(17/8”) DIA
Style options:
GA: 1890s R: Regent RCD: Regent with Ceramic Disk GCD: 1890s with Ceramic Disk MC: Mastercraft
Finish options:
CP: Chrome NI: Nickel IB: Inca
1
/8” BSP 20 ( /4”) HOLE 30(13/16”)
COLD INLET
2123/4G
3
63 (21/2”) SHANK
HEATER
1149 Barwil-VentedTaps-final:Layout 1 04/09/2009 4:05pm Page 4
2125G (GA shown) 1⁄2" basin taps with 5" nose for use with inset basins. Finish Chrome/Nickel Inca
Pair (Ex VAT) £263.00 £319.00
2125G
1020G RFC shown Also available GA R GCD RCD Mixer for fitting into work surface at a fixed centres of 203mm. Finish GA R GCD RCD Chrome/Nickel Inca RFC HFC HEC Chrome/Nickel Inca
Each (Ex VAT) £319.00 £399.00 £390.00 £472.00
1020G
125 (5”)
200 (8”) FIXED
130 (21/2”)
20 (3/4”)
4
425 (16 3/4”) 215 (81/2”)
FLANGE 48 (17/8”) DIA 1 /2” BSP HOLE 30 (13/16”)
125 (5”)
275 (1013/16”)
FROM HEATER
HOLE 22DIA COLD INLET
2125G
HEATER
TO HEATER
1020G
1149 Barwil-VentedTaps-final:Layout 1 04/09/2009 4:05pm Page 5
Q2 - 2124G Basin pillar tap. Finish Chrome/Nickel
Pair (Ex VAT) £340.00
Q2-6450G 115mm nozle 3 Hole basin mixer with pop-up-waste.
Q2 2124G
Q2-6455G 140mm nozle 3 Hole basin mixer with pop-up-waste. Finish Chrome/Nickel
Set (Ex VAT) £375.00
Also available Q2-6451G 115mm nozle 3 Hole basin mixer without pop-up-waste.
Q2-6455G Q2-6450G
Q2-6456G 140mm nozle 3 Hole basin mixer without pop-up-waste. Finish Chrome/Nickel
Set (Ex VAT) £375.00
125 (415/16”)
65 (29/16”)
102 (4”)
114/140 PROJECTION (41/2”-51/2”) 3 HOLES 29 (13/16”)
HOT
5
COLD
HOLE 22 (29/16”)
45
1
1
/2” BSP
/2” BSP
FLEXIBLE HOSE
HEATER
1
/2” BSP
HEATER
COLD INLET
Q 2124G
300 MAX (12”)
Q6450/5G
1149 Barwil-VentedTaps-final:Layout 1 04/09/2009 4:06pm Page 6
6450G
6450G GA shown Also available R RCD GCD 3-hole basin mixer with pop-up waste, 115mm nozzle. 6455G As above but with 140mm nozzle. 6453/8G GA shown Also available R GCD RCD 1⁄2" pillar sink mixer with swivel nozzle. NB. Mixers have single flow nozzles fitted with an aerator. Single check valves are incorporated in the hot and cold inlets to comply with water byelaw 25.IRN 101 (see page 7 for dimension drawing). Finish Chrome/Nickel Inca
MC6450G 3-hole basin mixer with pop-up waste 112mm nozzle. MC6455G As above but with 140mm nozzle. Finish Chrome/Nickel Inca
Each (Ex VAT) £450.00 £494.00 MC6450G MC6455G
MC6454G Wall mounted basin mixer. Finish Chrome/Nickel Inca
Each (Ex VAT) £400.00 £438.00
Each (Ex VAT) £398.00 £434.00
6453/8G
75 MIN (3”)
150 (6”) MIN - 250 (10”) MAX
6
HOT
114/140 PROJECTION (41/2” - 51/2”)
114/140 PROJECTION (41/2”-51/2”) COLD
HOT
COLD
3 HOLES 29 (13/16”) 40 MAX (19/16”)
29 HOLE (13/16”)
34 HOLE (15/16”)
1 1
1
/2” BSP
/2” BSP
1
/2” BSP
/2” BSP
FLEXIBLE HOSE
COLD INLET 300 MAX (12”)
FLEXIBLE HOSE
HEATER
HEATER
6450G
300 MAX (12”)
MC6450G
1149 Barwil-VentedTaps-final:Layout 1 04/09/2009 4:06pm Page 7
HFC 103G - 3" Lever HEC 103G - 6" Lever Basin Pillar Taps 1⁄2" Inlet Finish Chrome/Nickel
Pair (Ex VAT) £234.00
HEC 103G
HFC 106G - 3" Lever HEC 106G - 6" Lever Sink Pillar Taps 1⁄2" Inlet Finish Chrome/Nickel
Pair (Ex VAT) £241.00
HFC 106G
75 (3”)
150 (6”) 75 (3”)
150 (6”)
HOT
137mm (53/8”)
3 HOLES 29 (13/16”) COLD
260mm (101/4”)
150mm (6”)
85 (33/8”)
38 (11/2”)
115 (41/2”)
100 (4”)
1
/2” BSP
1
/2” BSP HEATER
FLEXIBLE HOSE 150 (6”) MIN - 250 (10”) MAX
COLD INLET
HEATER COLD INLET
6453G (previous page)
HFC 103G
HFC 106G
HEATER
1149 Barwil-VentedTaps-final:Layout 1 04/09/2009 4:05pm Page 8
Barber Wilsons & Co Ltd Crawley Road Westbury Avenue Wood Green London N22 6AH Tel +44 (0)208 888 3461 Fax +44 (0)208 888 2041 Email sales@barwil.co.uk
www.barwil.co.uk