CRYSTAL CLEAR RESULTS …naturally Natural Clarifer™ A biodegradable clarifying solution from BioGuard®.
BioGuard.com PO Box 300002 Lawrenceville, GA 30049 ph: 800.932.5943 | fx: 800.795.7946
Proud sponsor of Splash for CF Visit www.splashforCF.org 4129BIO
SM
©2011
® 2011 BioGuard, Optimizer Plus and SunShield are registered trademarks of BioLab, Inc.
guarding more than your pool.
NATURAL CLARIFIER
™
A biodegradable solution! BioGuard® Natural Clarifier™ uses a natural ingredient, Chitosan, to help keep your pool water sparkling and your filter working at peak efficiency. BioGuard Natural Clarifier should be part of your weekly pool maintenance program or it may also be used to cure cloudy water. Chitosan is produced from the exoskeletons of crustaceans (such as crab and shrimp). It causes fine sediment particles to bind together to make big particles that are removed by your filter, significantly improving your filters efficiency, and giving you clear sparkling water. BioGuard Natural Clarifier contains no dyes or fragrance and is biodegradable. It is specifically formulated to work in conjunction with all pool surface types and all treatment types.
Easy to use and apply! Make sure all pool equipment is working properly, including pump, filter, skimmer and heater. If needed, backwash and/or clean filter according to manufacturer’s directions. WEEKLY MAINTENANCE: To keep your water sparkling clear, apply Natural Clarifier weekly at a rate of 1 fl. oz. per 5,000 gallons of pool water. CLOUDY WATER TREATMENT: 1. Apply Natural Clarifier at a rate of 1 fl. oz. per 5,000 gallons of pool water. 2. Apply slowly and directly into water while walking around deep end of pool to clear cloudy water. 3. Allow pump and filter to operate for at least 12 hours after application. 4. For very cloudy water, double or triple the dose.