The tiles shown in the photographs below are classic distressed Black and WhiteItalian Marble installed in the kitchen of a property inBamber Bridge which is South of Preston. Some of the tiles had an issue with loose grout which I suspect was due to the suspended wooden floor and a small amount of movement had resulted in the grout cracking.
Sealing a Marble Tiled Kitchen Floor Day two started with an initial clean making sure to remove any excess grout smeared on the surface that can affect the look of the tile if not removed. This was followed by the application of the last of the set of burnishing pads which is a 3,000-grit pad that really brings up the polish on the marble. You only need a small amount of water sprayed onto the floor when applying this last pad so by late morning the floor was dry and ready for sealing. The customer wanted a better sheen appearance than they previously had, fortunately we find the Diamond burnishing pads do this well, they also tighten up the pores of the stone as well which means less sealer is needed. The floor was then sealed withTile Doctor Colour Grow which is an impregnating sealer that improves colour and soaks into the stone occupying the pores and thereby preventing dirt from becoming ingrained. Once complete the floor looked great and the client was very happy. Source:Marble Floor Tile Cleaning and Polishing Service in Bamber Bridge Italian Marble Kitchen Marble Renovated in Bamber Bridge
1/1 Powered by TCPDF (www.tcpdf.org)