SHORT BLOCK REBUILDING
CLEANING, ASSEMBLY & SAFETY
CYLINDER HEAD REBUILDING
Magnaflux® Crack Detection Units Y-7
Legs adjust to accommodate irregular surfaces An intense magnetic field is created in the area between the yoke legs. Any surface cracks will create flux leakages that will attract magnetic particles that form indications that allow for detection.
Y-7 Yoke Specifications Current Draw: 115V, 50/60 Hz Line Draw: 9 amps @ 115V AC 4 amps @ 115V DC Demag: Yes in AC mode Yoke Weight: 7.4 lbs. (3.6kg) 115V
V-TWIN HARD PARTS
OFFROAD BIKE, ATV HARD PARTS
MEASURING TOOLS
BRAKE & ALIGNMENT CRANKSHAFT/ TOOLS FLYWHEEL GRINDING
Leg Capacity: 0" - 12" (0-30cm) across poles
48
Slim molded light easily fits on the leg of the Y-6, &Y-7 Yoke (below) to illuminate the inspection area. Light works only in AC mode when yoke is activated. Meets ASTM E 1444 visible light requirement of 100 foot candles. Lets you use the yoke in darkened area.
Cord: 9 ft. (274.32cm) with grounded plug Other: Carrying case & instructions included
Easy-to-access switch makes going from AC to DC quick.
Y-7 AC/DC Crack Detection Yoke
• Designed for reliable, one-person magnetic particle inspection of ferrous parts • Fully portable and fits into tight spaces • Finds surface defects in AC mode and near-surface defects in DC mode • Adjustable, double-jointed legs contour easily to any component shape to assure good contact • 0-11"/0-28cm leg capacity • Pull force of 10 lbs/4.54kg AC and 60 lbs/27.2kg DC complies with specifications • Solid state controls in housing for maximum safety and reliablility • 2 minute ON/OFF duty cycles for fast, efficient inspections • Use with MAGNAFLUX® Dry Non-Fluorescent powders • Carrying case included
N CE I S
Model Voltage Cycles Y-7 115 50/60 Hz Light Attachment for Y-7 Yokes only
Amps 9 AC / 4 DC
Weight 7.4 lbs. / 3.4 kg
Jobber $829.99 49.29
Order No. MF-43550 MF-621785
6"
Non-Fluorescent Magnetic Powder for Dry Method Particle Inspection
1945
4"
Field Indicator design may vary. Sold separately
• Works with all dry magnets, including Magnaflux® yokes above • Store in a moisture free environment
Size Jobber White Jobber Yellow Jobber Red 1 lb. $ 9.99 WCD-100-G $ 9.99 WCD-101-G $ 9.99 WCD-103-G 5 lb. 29.99 WCD-500-G 29.99 WCD-501-G 31.99 WCD-503-G 25 lb. 109.99 WCD-2500-G 154.99 WCD-2501-G 149.99 WCD-2503-G
Small Parts Demagnetizer
• A quick & easy method for distributing Magnaflux® powder
Don’t jeopardize your engine work! Heat, friction and magnetic particle inspection can cause magnetism to build up in your engine components. If not removed, it will attract ferrous materials in engine lubrication and may cause premature engine failure. This easy to use table demagnetizer is a fast and easy way to ensure that all residual magnetism is eliminated from engine components. Use with the optional Field Indicator to be sure all remaining magnetism is eliminated.
Description Atomizer Assembly for small areas Applicator Bulb for large areas Replacement Bulb for Atomizer Jar
Description Small Parts Demagnetizer Magnaflux® Field Indicator
MM-301
WCD-266-G
Magnetic Powder Applicators
MM-301-1 Jobber $28.99 19.99 11.99
Order No. MM-301 WCD-266-G MM-301-1
order at 1-800-533-8010 (outside the US & Canada, 1-507-452-1830) or online at www.goodson.com
Jobber Order No. $79.99 SPD-46 67.99 CR-2480