STEP 2: SWING ARM ASSEMBLY • Install the two Wave Washers (83) onto the Left and Right sides of the Swing Arm axle. • Slide the Left and Right Swing Arms (10&11) onto the appropriate side of the axle. There is a small sticker on each swing arm that shows L (Left) or R (Right). Do not force the swing arms onto the axles, they should slip on but may need to be jiggled a little to align them properly. The swing arms have been installed at the factory during testing so they should fit properly. • Install two 5/16" Flat Washers (79) onto the two 5/16" Hex Head bolts (59) and install and tighten in the threaded holes in the ends of the axle.
8
For more information, visit BestElliptical.org
EL455 Elliptical