Section 3 Wheel Chocks & Car Ramps A
B
Wheel Chocks 4.0kg A Rubber Pair Model No.
C
Wheel Chocks 5.8kg B Rubber Pair WC01
Two rubber wheel chocks ensure that vehicle will not move when being jacked or parked on an incline. Suitable for cars and light vans not exceeding 4ton gross weight. Dimensions (H x L x W): 150 x 195 x 100mm Weight Each: 2.0kg
Model No.
WC02
Steel Wheel Chocks E Heavy-Duty 3.0kg Pair
WC03
Model No.
G Car Ramps - Pair CAR2000
Manufactured from 3.5mm steel section. Suitable for professional or serious DIY applications. Corrosion resistant finish. Ramps stack together and will stand upright for easy storage. 2000kg 800mm 190mm 250mm 345mm 200mm
WC04
F
Steel Wheel Chocks F Heavy-Duty 8.0kg Pair Model No.
WC05
Two welded steel wheel chocks ensure that vehicle will Two welded steel wheel chocks ensure that vehicle will not move when being jacked or parked on an incline. not move when being jacked or parked on an incline. Suitable for cars and light vans. Suitable for heavy goods vehicles. Dimensions (H x L x W): Weight Each:
G
Capacity per Pair: Length: Ramp Height: Maximum Height: Width: Maximum Tyre Width:
Model No.
Single nylon reinforced rubber wheel chock ensures that vehicle will not move when being jacked or parked on an incline. Fitted with eye bolt for rope or chain. Suitable for heavy goods vehicles. Dimensions (H x L x W): 150 x 200 x 250mm Weight: 4.3kg
E
Model No. SEE BELOW Manufactured to German GS/TUV standards. Fine rolled thread and precision made thrust bearing for long life and smooth operation. Model No: 57M 58M Capacity: 1ton 1.5ton Minimum Height: 85mm 100mm Maximum Height: 330mm 375mm Closed Length: 365mm 405mm
Model No.
Wheel Chock 4.3kg C Rubber Single
Two rubber wheel chocks ensure that vehicle will not move when being jacked or parked on an incline. Suitable for heavy goods vehicles up to 10ton gross weight. Dimensions (H x L x W): 175 x 270 x 115mm Weight Each: 2.9kg
D
D Scissor Jacks
163
H
153 x 230 x 170mm 1.5kg
Dimensions (H x L x W): Weight Each:
210 x 270 x 200mm 4.0kg
2000kg
H Twin Barrel Foot Pump Model No. FP2 High power, steel framed foot pump with two Ă˜50 x 120mm steel barrels able to deliver 470cc of air per stroke. Dial type pressure gauge with rotating bezel. Gauge calibrated in psi and bar and ranges from 0-100psi and 0-7bar . Fitted with 610mm flexible pressure hose with clip-on type connector . Professional pump for emergency use. For our full range of Foot Pumps see page 321.