Lucifer Lighting Catalog by Alcon Lighting

DOWNLIGHTS

LEVER HOUSE New York, NY A retro/modern setting with warm wood, mirrors, and black chairs is enlivened by the small aperture, sheer profile, recessed trims that provide a strong contrast to the conventional lighting in the honeycomb ceiling panel. Lighting: Lâ&#x20AC;&#x2122;Observatoire International Designer: Marc Newson Fixture: DL11Z (p 20)

LUCIFER LIGHTING. minimal fixtures.

MAXIMAL IMPACT. ÂŽ

about the company

YOU DON’T NEED BIG LIGHTS TO MAKE A BIG IMPACT. At Lucifer Lighting, sophisticated design, engineering innovation, and sustainable light sources come together in architectural fixtures that let your vision come to light.

All of our products—downlights, tracks, spots, light strips, fiber optics, and landscape and path lights—accept a variety of effects devices such as lenses, louvers, kick reflectors, and filters. Most also accept a variety of energy efficient lamp sources and can be dimmed or controlled by occupancy and photo sensors to reduce energy consumption. We call it Tuneable® Lighting. Designers call it being able to produce the exact results they want and need, with fixtures that don’t call attention to themselves.

Lucifer means “bearer of light”, and it’s what we do best—bring you the light you need to design the environment you want.

JAMES HOTEL Chicago, IL Subtle, no-glare lighting enhances daylight by providing overall ambient illumination and accents where needed, such as over the reception desk and seating areas. Architecture: Yabu Pushelberg Lighting: Isometrix Lighting + Design Ltd. Fixture: DL2RZP (p 18)

INTRODUCTION

Elegance in design and engineering. Downlights from Lucifer Lighting allow designers to emphasize the effect, not the fixture. Small-scale downlights and apertures, zero-sightlines, distinctive finishes, and advanced engineering combine to create the highest-quality, most unobtrusive fixtures available. Our downlights perform beautifully whether you’re designing light in art galleries or offices, residences or retail settings, poolside or marine environments, accessible or inaccessible ceilings, new construction or remodeled interiors, restaurants, hotels, museums, and more. Lucifer Lighting has led the way in lighting for more than 25 years with innovations and inventions that have been copied, but never equaled.

zero-sightline downlights

gear-driven downlights

Our zero-sightline trims install flush to the ceiling to create a sleek finish without any visual distractions—just a smooth surface punctuated with the beauty of pure light. Because all parts are precision-engineered, with a proper installation, there will be no ceiling cracking for years and years.

We engineered the industry’s first dual-axis, geardriven downlights with 45º aim and superior center beam optics.

We make flush-fit installation easy. Housings come direct from the factory ready to accept the zero-sightline kit. Simply frame in the housing, apply drywall, then align the screw holes on the appliqué with those on the rotatable collar on the housing, and secure. The rotatable collar is a Lucifer innovation that makes it fast and easy to align successive square trims in a ceiling— the trim orientation can be rotated after the housing is installed but before spackle is applied. After the appliqué is spackled and painted, the downlight is installed. Fixtures can also be specified without an appliqué so the trim can overlap the ceiling.

zero-sightline DOWNLIGHT

Concealed internal gear trains create self-locking, anti-skid, rotatable, and aimable two-axis adjustments. All adjustment mechanisms are concealed by the fixture faceplate, which is easily removed to provide immediate access to the lampholder. Rotation and tilt can be adjusted from inside the room, using just a screwdriver, without removing the fixture or damaging the ceiling, and while the light is on, so you can see the effect while you’re creating it. In addition, an indexing key on the fixture precisely aligns with the die-cast key slot in the appliqué to guarantee the lampholder—and therefore, your lighting design— stays in position after every relamping. Most fixtures can accept up to three effects devices to control beam, color, and glare. A black, baffle eliminates aperture glare. GEAR-DRIVEN DOWNLIGHT KEYED FOR ALIGNMENT:

HOUSING

APPLIQUé KEY SLOT FIXTURE KEY

ROTATABLE COLLAR 357º ROTATION

APPLIQUé SCREWS

TRIM

Be sure to check our website, luciferlighting.com, for our Downlight Application Guide which provides zero-sightline trade notes that can be incorporated into drawings and electrical specifications.

You’ll also find detailed photometry reports, the most up-to-date product spec sheets, and complete installation instructions.

OPTIONAL ZEROSIGHTLINE KIT

ROUND OR SQUARE FACEPLATE IS EASILY REMOVED FOR ADJUSTMENT OF LAMPHOLDER ROTATION AND TILT

0º-45º TILT

INTRODUCTION

the right light, the right effects Lucifer Lighting is committed to excellence in interior design and sustainability. By choosing the right light source, fixture, and effects devices, you can create a stunning setting that is also energy efficient.

Choosing a light source

CHOOSING A FIXTURE

adding Effects Devices

The lighting industry is at a welcome crossroads where technological advancements are now able to support environmental concerns by offering lamps that conserve energy while providing the quality of illumination designers demand. The following information will help you choose the appropriate lamp for your Lucifer Lighting fixture.

Most downlights are available with either round or square faceplates. Many architects and designers find round trims to be the most versatile and accommodating, especially in irregularly shaped rooms, while square trims can be especially effective in square or rectangular spaces and when used in soffits to wash a wall with light.

Effects devices are heat-treated glass lenses, color filters, and black metal louvers and baffles. They allow a designer to shape and control light to customize the space, create added emphasis, or set a particular mood.

MR AND LINE VOLTAGE HALOGEN Halogen lamps are incandescent lights that use filaments originally developed for the automotive industry. Those in the MR (multifaceted reflector) configuration are known for their precision and variably focused beam that uses IR (infrared) technology to efficiently pack light at 24 lumens per watt, offering higher wattage performance at lower wattage consumption. Because their color temperature is similar to sunlight, color, texture, skin tones, fabrics, and food all look natural under halogen lights. Special Halogen IR lamps contain no mercury, are energy efficient, offer instant-on, and are easily dimmable, making them a versatile choice.

LED Light emitting diodes are solid state light sources that are rapidly approaching the energy efficiency of CFLs. Their small size brings them close to the optimal point source and creates a range of opportunities for energy efficient lighting design, especially for display and accent lighting in lower ambient environments. LEDs are also available in a wide range of white and discrete colors, do not emit harmful IR (infrared) or UV (ultraviolet) radiation, and do not contain mercury. LEDs are currently not bright enough to supplant halogen lamps for general illumination.

15-24

2,800-3,050

100

4,000-6,000

7-37

2,700/4,200

50,000

EFFICIENCY Lumens/Watt

COLOR TEMP1 Degrees Kelvin

COLOR RENDITION2 CRI

RATED LIFE Hours

EFFICIENCY Lumens/Watt

COLOR TEMP1 Degrees Kelvin

COLOR RENDITION2 CRI

RATED LIFE Hours

MR HID High intensity discharge lamps are an arc source, often referred to as metal halide. Usually thought of as very high wattage, large area light sources, low wattage, ceramic metal halide HID lamps offer an energy-efficient alternative to standard incandescent light sources, with similar color temperature and rendition. They are effective in applications where instant-on, instant re-strike, or dimming are not required, such as high-ceiling interiors, retail stores, public spaces or residential exteriors where the fixtures are operating on controls.

CFL Compact fluorescent lamps are an arc source that use less power and have a longer life than incandescent lamps, but their color temperature and rendition is not as natural. Also, though they efficiently radiate diffuse light over a broad area, they do not focus well, so are not suited for accent lighting. While they are extremely energy efficient, they do contain small amounts of mercury which complicates disposal options and raises questions about their environmental impact.

50-53

3,000

81/92

12,000

54-60

2,700-4,100

12,000

EFFICIENCY Lumens/Watt

COLOR TEMP1 Degrees Kelvin

COLOR RENDITION2 CRI

RATED LIFE Hours

EFFICIENCY Lumens/Watt

COLOR TEMP1 Degrees Kelvin

COLOR RENDITION2 CRI

RATED LIFE Hours

1. Degrees Kelvin refers to the color of transmitted light; lower Kelvin values denote a warmer perceived light, and higher values a cooler, more bluish light.

2. CRI refers to how well color is rendered; a color rendition index of 100 is considered optimal.

As light sources are continually and rapidly evolving to reflect technological advances and meet new needs, we recommend you check with luciferlighting.com for the latest information on available lamp sources.

Fixed To light a generalized area, such as a reception area, office, corridor, or discrete area in a room, like a sofa or dining table, fixed fixtures will provide crisp, uniform illumination. Adjustable Adjustable fixtures provide more focused illumination to accent specific objects, such as a work of art, display shelving, or interior furnishings. They are also useful in interiors where furniture may be moved or its final position is unknown. Gear-Driven If art, displays, or furnishings may change locations, gear-driven, adjustable fixtures allow light to easily be redirected. Gear-driven fixtures also allow you to effectively position accent lights without moving the finished trim in orientation to the ceiling. Wallwash A wallwash fixture will provide a soft and even wash of light from where the wall meets the ceiling to where it meets the floor, without scalloping. Wallwashing is generally enhanced by using three or more fixtures. Wet Location Stainless steel fixtures are corrosion resistant, making them appropriate for dry, damp, and wet exterior locations, such as showers, baths, and under soffits and eaves. Polymer fabricated trims are an excellent alternative for use in harsh marine environments.

Clear lens (1) Clear borosilicate glass lens for unlensed lamps; conforms to NEC and NFPA codes. Ultra-violet lens (2) Made by Bausch and Lomb; blocks 99% of UV radiation from light sources. Spread lens (3) Scatters and diffuses the light and is typically used on rough and textured surfaces. Linear spread lens (4) Shapes the light into a vertical or horizontal elongated form that is typically used to illuminate columns or retail displays. Soft focus lens (5) Softens and spreads the light beam. Honeycomb louver (6) Minimizes glare and, if stacked closest to lamp source, will also confine the beam. Warm tone lens (7) Adjusts color temperature of light to 2700 degrees Kelvin, which enhances the depth of tones on surfaces like wood panels. Frosted lens (8) Provides maximum beam diffusion and smoothes out scallops. LENSES

DUO RESTAURANT, four seasons at mandalay bay, Honolulu, HI These fixtures are resistant to the corroding effects of wet weather and salty air in this restaurant by the sea; the stainless steel finish also reflects the other shiny surfaces in the kitchen and throughout the dining room. Lighting: h.e. banks + associates Fixture: DL21Z (p 21)

Z series downlights

Z series overview

FINISHES AND ACCESSORIES

The Z Series is the most diminutive downlight fixture collection Lucifer Lighting offers. In addition to small apertures, most fixtures have an outside dimension of 4" or less and profiles of only 55/1000 of an inch, making them almost invisible against the ceiling. Also, most trims can be installed flush to the ceiling for zero-sightline applications. Precisely machined torsion spring clips ensure secure retention in ceilings that vary in thicknesses up to 1", and allow the trim to be rotated from below. Fixtures are listed for dry, damp, and wet locations.

Standard Z Series finishes are white and black with a matte granulated powdercoat, industrial gray with a glass bead blasted stainless steel finish, and polished chrome. Select trims are available in brushed stainless steel. Custom finishes are also available.

The Z Series fixtures are compatible with the following MR-16 style light sources: 20w to 75w low voltage halogen, 20w and 39w HID ceramic metal halide, 5w LED, and CCFL. For export markets that require a special terminal block on the downlights that will not be used with housings, we recommend you refer to international specification sheets for Z Series fixture construction.

All Z Series fixtures come with a frosted lens. Standard trims may accept multiple lenses or effects devices, depending on lamp. In areas of the ceiling where downlight fixtures may be installed at a future date, for example, to illuminate artwork when it changes position in a room, blankoff plates (DLA-BOP-Z-RD round or DLA-BOP-Z-SQ square) may be used. These blanks are appropriate for both zero-sightline and trim flange overlay ceiling conditions. Plates are easily removed using central pinholes.

Z SERIES anti-glare professional baffle

PRIVATE RESIDENCE Modesto, CA

Most Z Series open aperture trims include a distinctive, precision-engineered design feature, the Professional Baffle. This black, die-cast element covers the inside edge of the aperture to ensure the aperture edge is non-reflective and glare free when the fixture is illuminated.

The art collector who owns this home occasionally rearranges the collection. Downlights with adjustable rotation and tilt are simple to redirect when artwork is moved. Keyed alignment between the downlight and appliquĂŠ ensures correct placement of aimed lamp during relamping. Fixture with Professional Baffle

Fixture without Professional Baffle

Lighting: Randall Whitehead Lighting Design Fixture: DL32DGZP (p 23)

Z series downlights

LAMPS HAL, HID, LED, CCFL

3.13" 80mm

DL1ZP

specification notes Ceiling mounted appliqué must be specified separately for zero-sightline applications. Lamp must be specified and ordered separately.

1.75" 44mm 3.95" 100mm

Round Fixed

ONLINE QUICK PRODUCT PAGE REFERENCE: DLCAT1ZP

DL1ZP

Round, fixed downlight with deeply regressed lamp, and .055" thick trim flange that is almost invisible against the ceiling. Optional zero-sightline appliqué can be installed flush with the ceiling. 1.75" round aperture includes Professional Baffle. Accepts up to 3 effects devices, depending on lamp.

LAMPS HAL, HID, LED, CCFL

4.00" 102mm

specification notes Ceiling mounted appliqué must be specified separately for zero-sightline applications. Lamp must be specified and ordered separately.

1.75" 44mm 3.95" 100mm

Round Adjustable Gear-Driven

ONLINE QUICK PRODUCT PAGE REFERENCE: DLCAT2DGZP

DL2DGZP

CORPORATE INTERIOR Houston, TX

Round, hot aim, adjustable downlight with deeply regressed lamp, two axis, selflocking, 357° rotation, up to 45° of tilt in ceilings up to 5/8" thick, up to 15º of tilt in ceilings up to 1" thick, and .055" thick trim flange that is almost invisible against the ceiling. Optional zero-sightline appliqué can be installed flush with the ceiling. 1.75" round aperture includes Professional Baffle. Accepts up to 3 effects devices, depending on lamp. Patent pending.

Diminutive downlights complement this minimalist interior design. White finishes accent the room’s perimeter, while chrome finishes play up furniture details. Lighting: Planning Design Research Fixture: DL2RZP in chrome and white (p 18). Series 2000 light strip also used. Enter an online quick product page reference into our website search field to go directly to a specific product page.

DL2DGZP

Z series downlights

ZZ series series downlights downlights

DL2RZP

3.13" 80mm

Round Adjustable

LAMPS HAL, HID, LED, CCFL

specification notes Ceiling mounted appliqué must be specified separately for zero-sightline applications.

specification notes Listed for wet location.

1.75" 44mm

3.95" 100mm

4.38" 111mm

Recommended spacing 15"-18" setback, 30" on center

ONLINE QUICK PRODUCT PAGE REFERENCE: DLCAT6ZP

Round, adjustable downlight with deeply regressed lamp, up to 45° of manual tilt that can be locked in any position from the room side, and .055" thick trim flange that is almost invisible against the ceiling. Optional zero-sightline appliqué can be installed flush with the ceiling. 1.75" round aperture includes Professional Baffle. Accepts up to 3 effects devices, depending on lamp.

DL6ZP

Round, wallwash downlight with an internal kick reflector with sealed frosted lens for uniform, glare-free wallwashing, and a .15" slight return, stainless steel flange with integral silicone gasket. 1.75" round aperture includes Professional Baffle. Patented design. Accepts up to 2 effects devices, depending on lamp.

3.33" 85mm

1.75" 44mm 3.95" 100mm

LAMPS HAL, HID, LED, CCFL

specification notes Ceiling mounted appliqué must be specified separately for zero-sightline applications.

specification notes Listed for wet location. 3.13" 80mm

Lamp must be specified and ordered separately. Recommended LAMP AND beam spread GE 50w MR-16 Medium Flood EXK 30º

ONLINE QUICK PRODUCT PAGE REFERENCE: DLCAT5ZP

Lamp must be specified and ordered separately.

1.75" 44mm 4.38" 111mm

Recommended spacing 15"-18" setback, 30" on center

DL5ZP

Round Fixed Wet Location

ONLINE QUICK PRODUCT PAGE REFERENCE: DLCAT9ZP

DL9ZP

Round, wallwash downlight with internal kick reflector with integral frosted lens for uniform, glare-free wallwashing, and .055" thick trim flange that is almost invisible against the ceiling. 1.75" round aperture includes Professional Baffle. Patented design. Accepts up to 2 effects devices, depending on lamp.

Be sure to check our website, luciferlighting.com, for detailed photometry reports, the most up-to-date product spec sheets, and installation instructions.

Recommended LAMP AND beam spread GE 50w MR-16 Medium Flood EXK 30º

Round Wallwash Mirage® Wet Location

DL5ZP

Refer to online Downlight Application Guide for zerosightline trade notes recommended for incorporation in drawings and electrical specifications.

DL6ZP

Lamp must be specified and ordered separately.

ONLINE QUICK PRODUCT PAGE REFERENCE: DLCAT2RZP

DL2RZP

Round Wallwash Mirage®

3.33" 85mm

Lamp must be specified and ordered separately.

Round, fixed downlight with deeply regressed lamp, sealed frosted lens, and a .15" slight return, stainless steel flange with integral silicone gasket. 1.75" round aperture includes Professional Baffle. Optional clear sealed glass lens is also available. Accepts up to 3 effects devices, depending on lamp.

Enter an online quick product page reference into our website search field to go directly to a specific product page.

DL9ZP

Z series downlights

DL11Z

2.30" 58mm

LAMPS HAL, HID, LED, CCFL

specification notes Ceiling mounted appliqué must be specified separately for zero-sightline applications.

specification notes 20w halogen flood BAB lamp for use in showers and baths. 50w halogen lamp best suited for porches and soffits outdoors. Fixture rated for 50w max halogen lamp.

3.13" 80mm

Lamp must be specified and ordered separately.

1.88" 48mm

3.95" 100mm

4.38" 111mm

Recommended LAMP AND beam spread 20w MR-16 Flood BAB 35º

ONLINE QUICK PRODUCT PAGE REFERENCE: DLCAT11Z

Round Adjustable Naiad Wet Location

ONLINE QUICK PRODUCT PAGE REFERENCE: DLCAT21Z

Round, fixed downlight with .055" thick flange that is almost invisible against the ceiling. Optional zero-sightline appliqué can be installed flush with the ceiling. 1.75" round, die-cast aperture lens holder allows for shallow lamp recess. May be re-lamped from room side without removing trim from housing. Accepts up to 2 effects devices, depending on lamp.

DL21Z

Round, adjustable downlight with integral silicone gasket with 45º of manual tilt that can be locked in any position from above, and a .15" return, stainless steel flange. Standard frosted glass lens is sealed over the 1.88" round trim aperture and listed for wet locations. Optional sealed clear glass lens is also available.

DL11Z

DL15Z

LAMPS HAL, HID, LED, CCFL

2.81" 71mm

LAMPS HAL, HID, LED, CCFL

specification notes Ceiling mounted appliqué must be specified separately for zero-sightline applications.

3.13" 80mm

Lamp must be specified and ordered separately.

1.83" 46mm

3.95" 100mm

4.34" 110mm

Lamp must be specified and ordered separately. .25" 6mm

Recommended LAMP AND beam spread 20w MR-16 Flood BAB 35º

ONLINE QUICK PRODUCT PAGE REFERENCE: DLCAT15Z

Round Adjustable Polymer Naiad Wet Location

ONLINE QUICK PRODUCT PAGE REFERENCE: DLCAT21ZCP

Round, fixed downlight with .055" thick flange that is almost invisible against the ceiling. Optional zero-sightline appliqué can be installed flush with the ceiling. 1.75" round aperture, deeply regressed black lens holder baffle is vertically grooved for minimal glare. May be re-lamped from room side without removing trim from housing. Accepts up to 2 effects devices, depending on lamp.

DL21ZCP

Round, adjustable downlight with 45º of manual tilt that can be locked in any position from above, and a .25" thick, composite, polymer flange with integral silicone gasket. Frosted glass lens sealed over 1.83" round trim aperture is listed for wet locations and includes Professional Baffle. Optional sealed clear glass lens is also available.

DL15Z

Be sure to check our website, luciferlighting.com, for detailed photometry reports, the most up-to-date product spec sheets, and installation instructions.

specification notes 20w halogen flood BAB lamp for use in showers and baths. 50w halogen lamp best suited for porches and soffits outdoors. Fixture rated for 50w max halogen lamp. Listed for wet locations.

1.75" 44mm

Round Fixed Regressed Baffle

DL21Z

Listed for wet locations.

1.75" 44mm

Round Fixed

Refer to online Downlight Application Guide for zerosightline trade notes recommended for incorporation in drawings and electrical specifications.

Enter an online quick product page reference into our website search field to go directly to a specific product page.

DL21ZCP

Z series downlights

DL23Z

2.75" 70mm

1.25" 32mm 3.50" 89mm

LAMPS HAL, HID, LED, CCFL

specification notes Colored glass lens options:

specification notes Ceiling mounted appliqué must be specified separately for zero-sightline applications.

Blue Green Pink Red Yellow

3.42" 87mm

DGL-B DGL-G DGL-P DGL-R DGL-Y

DL31ZP

Lamp must be specified and ordered separately.

1.97" 50mm

Lamp must be specified and ordered separately.

5.88" 149mm

Suspended Glass Star

4.00" 102mm

ONLINE QUICK PRODUCT PAGE REFERENCE: DLCAT23Z

DL23Z

Square Fixed

ONLINE QUICK PRODUCT PAGE REFERENCE: DLCAT31ZP

DL31ZP

Round, fixed downlight with suspended, frosted, glass star with 1.25" round, clear aperture retained with chrome stem buttons, and a .055" thick, chrome trim flange. Optional lenses create colored, filtered light. Accepts up to 2 effects devices, depending on lamp.

DL24Z

3.13" 80mm

Square, fixed downlight with square .055" thick trim flange that is almost invisible against ceiling. Optional zero-sightline appliqué can be installed flush with the ceiling. Includes square, deeply recessed, Professional Baffle. Accepts up to 3 effects devices, depending on lamp.

LAMPS HAL, HID, LED, CCFL

specification notes 20w halogen flood BAB lamp for use in showers and baths. 50w halogen lamp best suited for porches and soffits outdoors. Fixture rated for 50w max halogen lamp.

specification notes Ceiling mounted appliqué must be specified separately for zero-sightline applications.

4.00" 102mm

Lamp must be specified and ordered separately.

Listed for wet locations. 1.65" 42mm 4.25" 108mm

Lamp must be specified and ordered separately. 1.82" 46mm

Recommended LAMP AND beam spread 20w MR-16 Flood BAB 35º

Square Adjustable Naiad Wet Location

ONLINE QUICK PRODUCT PAGE REFERENCE: DLCAT24Z

DL24Z

Square, adjustable downlight with square .15" return, stainless steel flange with integral silicone foam gasket, and 45º of manual tilt that can be locked in any position from above. Frosted, glass lens sealed over 1.65" square trim aperture, listed for wet locations. Optional sealed, clear glass lens is also available.

Be sure to check our website, luciferlighting.com, for detailed photometry reports, the most up-to-date product spec sheets, and installation instructions.

Refer to online Downlight Application Guide for zerosightline trade notes recommended for incorporation in drawings and electrical specifications.

4.00" 102mm

Square Adjustable Gear-Driven

ONLINE QUICK PRODUCT PAGE REFERENCE: DLCAT32DGZP

DL32DGZP

Square, hot aim, adjustable downlight with deeply regressed lamp, two axis, self-locking, 357° rotation, up to 45° of tilt in ceilings up to 5/8" thick, up to 15° of tilt in ceilings up to 1" thick, and square .055" thick trim flange that is almost invisible against the ceiling. Optional zero-sightline appliqué can be installed flush with the ceiling. 1.82" square aperture includes Professional Baffle. Accepts up to 3 effects devices, depending on lamp. Patent pending.

Enter an online quick product page reference into our website search field to go directly to a specific product page.

DL32DGZP

Z series downlights

DL35ZP

3.42" 87mm

LAMPS HAL, HID, LED, CCFL

specification notes Ceiling mounted appliqué must be specified separately for zero-sightline applications.

3.48" 88mm

Lamp must be specified and ordered separately. Recommended LAMP AND beam spread GE 50w MR-16 Medium Flood EXK 30º

1.97" 50mm 4.00" 102mm

Square Wallwash Mirage®

LAMPS HAL, HID, LED, CCFL

ONLINE QUICK PRODUCT PAGE REFERENCE: DLCAT35ZP

DL38ZP

Lamp must be specified and ordered separately.

1.82" 46mm 4.00" 102mm

Recommended spacing 15"-18" setback, 30" on center

DL35ZP

Square Adjustable Dual-Axis

ONLINE QUICK PRODUCT PAGE REFERENCE: DLCAT38ZP

DL38ZP

Square, wallwash downlight with internal kick reflector with integral frosted lens for uniform, glare-free wall washing, and square .055" thick trim flange that is almost invisible against the ceiling. Optional zero-sightline appliqué can be installed flush with the ceiling. 1.97" square aperture includes Professional Baffle. Accepts up to 2 effects devices, depending on lamp.

DL36ZP

Square, adjustable downlight with deeply regressed lamp, 357° of rotation that can be locked in any position from above, up to 45° of manual tilt in ceilings up to 1" thick that can be locked in any position from the room side, and .055" thick trim flange that is almost invisible against the ceiling. Optional zero-sightline appliqué can be installed flush with the ceiling. 1.82" square aperture includes Professional Baffle. Accepts up to 3 effects devices, depending on lamp.

LAMPS HAL, HID, LED, CCFL

3.42" 87mm

1.97" 50mm 4.25" 108mm

LAMPS HAL, HID, LED, CCFL

specification notes Listed for wet location.

3.42" 87mm

Lamp must be specified and ordered separately. Recommended lamp and beam spread GE 50w MR-16 Medium Flood EXK 30º

Listed for wet locations. 1.97" 50mm

Recommended spacing 15"-18" setback, 30" on center

Square Wallwash Mirage® Wet Location

ONLINE QUICK PRODUCT PAGE REFERENCE: DLCAT36ZP

DL36ZP

Square, wallwashing downlight with internal kick reflector with sealed frosted lens for uniform, glare-free wall washing in wet locations, and square .15" return, stainless steel flange with integral silicone gasket. 1.97" square aperture includes Professional Baffle. Accepts up to 2 effects devices, depending on lamp.

Be sure to check our website, luciferlighting.com, for detailed photometry reports, the most up-to-date product spec sheets, and installation instructions.

Refer to online Downlight Application Guide for zerosightline trade notes recommended for incorporation in drawings and electrical specifications.

specification notes 20w halogen flood BAB lamp for use in showers and baths. 50w halogen lamp best suited for porches and soffits outdoors. Fixture rated for 50w max halogen lamp.

4.25" 108mm

Square Fixed Wet Location

Lamp must be specified and ordered separately. Recommended lamp and beam spread 20w MR-16 Flood BAB 35º

ONLINE QUICK PRODUCT PAGE REFERENCE: DLCAT39ZP

DL39ZP

Square, fixed downlight with frosted glass lens and square .15" return, stainless steel flange with integral silicone gasket. Optional sealed, clear, glass lens also available. 1.97" square aperture includes Professional Baffle. Accepts up to 3 effects devices, depending on lamp.

Enter an online quick product page reference into our website search field to go directly to a specific product page.

DL39ZP

Z series downlights

DL61ZP

2.75" 70mm

LAMPS HAL, HID, LED, CCFL

specification notes Ceiling mounted appliqué must be specified separately for zero-sightline applications.

specification notes Listed for wet location.

2.40" 61mm

Lamp must be specified and ordered separately.

3.95" 100mm

Round Fixed Wide-Aperture

ONLINE QUICK PRODUCT PAGE REFERENCE: DLCAT66ZP

Round, fixed downlight with die-cast, wide aperture interior baffle, deeply regressed lamp, and .055" thick trim flange that is almost invisible against the ceiling. Optional zero-sightline appliqué can be installed flush with the ceiling. 2.38" round aperture includes Professional Baffle. Accepts up to 3 effects devices, depending on lamp.

DL66ZP

Round, fixed wallwash downlight with angled, die-cast, wide aperture, interior baffle, sealed, linear spread and frosted glass lenses, and .15" return, stainless steel flange with integral silicone gasket. 2.38" round aperture includes Professional Baffle listed for wet locations. Accepts up to 2 effects devices, depending on lamp. Patent pending.

2.40" 61mm

2.38" 60mm 3.95" 100mm

LAMPS HAL, HID, LED, CCFL

specification notes Ceiling mounted appliqué must be specified separately for zero-sightline applications.

specification notes 20w halogen flood BAB lamp for use in showers and baths. 50w halogen lamp best suited for porches and soffits outdoors. Fixture rated for 50w max halogen lamp.

2.75" 70mm

Lamp must be specified and ordered separately.

Listed for wet locations.

Recommended LAMP AND beam spread GE 50w MR-16 Medium Flood EXK 30º

2.38" 60mm 4.38" 111mm

Recommended spacing 32"-36" setback, 36"-40" on center

Lamp must be specified and ordered separately. Recommended lamp and beam spread 20w MR-16 Flood BAB 35º

ONLINE QUICK PRODUCT PAGE REFERENCE: DLCAT65ZP

Round Fixed Wide-Aperture Wet Location

ONLINE QUICK PRODUCT PAGE REFERENCE: DLCAT69ZP

Round, fixed wallwash downlight with angled, die-cast, wide aperture, interior baffle, deeply regressed lamp, linear spread and frosted lenses. Features a .055" thick trim flange that is almost invisible against the ceiling. Optional zerosightline appliqué can be installed flush with the ceiling. 2.38" round aperture includes Professional Baffle. Accepts up to 2 effects devices, depending on lamp. Patent pending.

DL69ZP

Round, fixed downlight with die-cast, wide aperture, interior baffle, deeply regressed lamp, sealed, frosted, glass lens, and .15" return, stainless steel flange with integral silicone gasket. 2.38" round aperture includes Professional Baffle listed for wet locations. Optional sealed, clear, glass lens also available. Accepts up to 3 effects devices, depending on lamp.

DL65ZP

Be sure to check our website, luciferlighting.com, for detailed photometry reports, the most up-to-date product spec sheets, and installation instructions.

Recommended spacing 32"-36" setback, 36"-40" on center

Round Wallwash Wide-Aperture Wet Location

DL65ZP

Round Wallwash Wide-Aperture

Lamp must be specified and ordered separately.

ONLINE QUICK PRODUCT PAGE REFERENCE: DLCAT61ZP

DL61ZP

Refer to online Downlight Application Guide for zerosightline trade notes recommended for incorporation in drawings and electrical specifications.

DL66ZP

Recommended lamp and beam spread GE 50w MR-16 Medium Flood EXK 30º

2.38" 60mm 4.38" 111mm

2.38" 60mm

Enter an online quick product page reference into our website search field to go directly to a specific product page.

DL69ZP

Z series downlights

Z series ACCESSORIES

DL72Z

LAMPS HAL, HID, LED, CCFL

2.25" 57mm

.75" 19mm

DLA-APP-Z-RD-3 DLA-APP-Z-RD-3

DLA-APP-Z

EDLA-APP-Z-SQ-3

DLA-APP-Z-SQ-5 DLA-APP-Z-SQ-5

EDLA-APP-Z-SQ-3

specification notes Ceiling mounted appliqué must be specified separately for zero-sightline applications. Lamp must be specified and ordered separately.

Ø 3.36" 85mm

8.00" 203mm

6.50" 165mm

4.09” 104mm

EDLA-APP-Z

Ø 3.36" 85mm

1.35" 34mm 1.47" 37mm 3.95" 100mm

Gyro Dual-Axis Adjustable TM

.74" 19mm

ONLINE QUICK PRODUCT PAGE REFERENCE: DLCAT72Z

DL72Z

Exposed, adjustable downlight with interlocking, circular, machined, aluminum planes that can be manually adjusted in two axes and locked in position with an allen-head wrench. May be configured with snoot towards roomside for glare control or reversed allowing for wide light distribution. .055" thick trim face can be installed with flange overlaying the ceiling plane or as zero-sightline with optional appliqué. Accepts up to 3 effects devices, depending on lamp. Patented design.

DH-NIC-SM2

LAMPS HAL, LED 18.38" 467mm

7.60" 193mm

17.20" 436mm

4.20" 107mm

10.20" 259mm

5.13" 130mm

9.20" 234mm

.74" 19mm .018" .5mm

.070" 2mm

.018" .5mm 8.00" 203mm

Zero-Sightline Appliqué Square

International Collar (Zero-Sightline)

DLA-APP-Z-RD

DLA-APP-Z-SQ

EDLA-APP-Z

For international gear-driven, zero-sightline applications and other applications that require a fine finish out. Specify EDLA-APPZ-RD for round trims and EDLA-APP-Z-SQ for square trims.

Round and square appliqués are accessories that should be specified when a downlight fixture is going to be installed flush to the ceiling for a zero-sightline. Models DLA-APP-Z-RD-3 and DLA-APP-Z-SQ-3 are recommended for all applications as they provide maximum structural reinforcement. Models DLA-APP-Z-RD-5 and DLA-APP-Z-SQ-5 have a thinner profile and are recommended for installations where the contractor prefers a thinner profile to apply mudding. All models include a removable plaster plug that ensures flush trim fit after mudding.

EDL-ZF

EDL-ZO

EDL-ZF

EDL

EDL-XF

EDL-ZO

EDL-ZF

Compatible trims: DL25Z Adjustable, DL31ZP Fixed, DL35ZP Wallwasher, DL38ZP Adjustable All trims can be interchanged and are ideal for retail applications where displays are being changed and the lighting requirements must adapt. Consult factory as to availability of custom finished trim divider.

ONLINE QUICK PRODUCT PAGE REFERENCE: DLCATNIC-SM2

Modular fixture, with two adjacent apertures for square trims, that will accept any combination of DL25Z, DL31ZP, DL35ZP, and DL38ZP trims. Housing features integral, low voltage, electronic transformers that may be individually circuited. Includes DLA-APP-SM2 appliqué kit.

Refer to online Downlight Application Guide for zerosightline trade notes recommended for incorporation in drawings and electrical specifications.

4.90" 124mm

3.60" 91mm

specification notes For zero-sightline applications only.

DH-NIC-SM2

Be sure to check our website, luciferlighting.com, for detailed photometry reports, the most up-to-date product spec sheets, and installation instructions.

.74" 19mm

Zero-Sightline Appliqué Round

3.46" 88mm

Lamp must be specified and ordered separately.

Gemini Square Modular

3.60" 91mm

3.62" 92mm

.77" 20mm

3.82" 97mm

4.33" 110mm

4.65" 118mm

.77" 20mm

International Collar (Flange Overlay)

International Collar (Zero-Sightline)

International Collar (Flange Overlay)

EDL-ZF

EDL-ZO

EDL-XF

For Z Series round or square, standard flange overlay applications.

For Z Series round, non-gear-driven, zero-sightline applications.

For X Series round or square, standard flange overlay applications.

International series downlight trims may be installed without housings; a collar is used instead to provide secure retention in drywall and plaster ceilings

Export trims are offered only in Z Series and the model number prefix changes to EDL. For more information, please consult the Lucifer Lighting website or export catalog.

HUNTINGTON LIBRARY San Marino, CA With so many decorative objects, colors, and textures, lighting must enhance the space and integrate with the chandelier, without distracting from the historic feeling in the room or calling attention to itself. UV lenses are used to protect the artwork and other precious objects. Lighting: Horton Lees Brogden Lighting Design Fixture: DL2RZP (p 18)

x series downlights

x series overview

FINISHES AND ACCESSORIES

X Series fixtures feature small apertures and larger trim diameters of about 5", which makes them especially appropriate for remodel applications where a larger trim may be required to access the housing compartment components. Fixtures are listed for dry, damp, and wet locations.

Standard X Series finishes are white and black with a matte granulated powdercoat, industrial gray with a glass bead blasted stainless steel finish, and polished chrome. Select trims, including those for wet locations, are available in brushed stainless steel. Custom finishes are also available.

X series trims can be used in accessible and nonaccessible ceilings and most are compatible with the following MR-16 style light sources: 10w to 75w low voltage halogen, 20w and 39w HID ceramic metal halide, 5w LED, and CCFL lamps.

Most X Series fixtures come with a frosted lens and accept up to three lenses or filters (depending on lamp) to tune light and control glare.

PRIVATE RESIDENCE Palm Beach, FL Diffuse light enhances an outdoor setting at night. Fixtures are machined out of special corrosion-resistant polymer with reinforced stainless steel and include sealed frosted lenses to last in harsh, marine environments. Lighting: I.D. Illumination Design Fixture: DL21XCP (p 39)

x series downlights

DL1XM

3.13" 80mm

LAMPS HAL, HID, LED, CCFL

LAMPS HAL, HID

specification notes Specify DL1XMM for a fixture with a 5.28" trim plate, .055" thickness, and no return.

specification notes Specify DL4XMM for a fixture with a 5.28" trim plate, .055" thickness, and no return.

4.10" 104mm

Specify DL1X for a fixture with a 5.28" trim plate and .15" thick return. Lamp must be specified and ordered separately. 2.84" 72mm

4.92" 125mm

ONLINE QUICK PRODUCT PAGE REFERENCE: DLCAT1XM

Specify DL4X for a fixture with a 5.28" trim plate and .15" thick return.

RECOMMENDED BEAM SPREAD MR-16 Medium Flood 30"

4.92" 125mm

DL1XM

Round Fixed Deep Cone

ONLINE QUICK PRODUCT PAGE REFERENCE: DLCAT4XM

DL4XM

Round, fixed downlight with deeply regressed lamp, and a sheer, .055" thick trim flange that is almost invisible against the ceiling. 1.88" round aperture. Accepts up to 3 effects devices, depending on lamp.

DL2RXM

Round, fixed downlight with deeply regressed lamp, a sheer, .055" thick trim flange that is almost invisible against the ceiling, a rolled-edge baffle to eliminate aperture glare, and an aluminum reflector with a 2.84" aperture that provides wide distribution and a 50º cut-off angle. Standard reflector is Clear Stippled (SR); reflectors are also available in Specular Clear (CR – shown in photo), Specular Black (BR) and Champagne (CH).

LAMPS HAL, HID, LED, CCFL

3.13" 80mm

LAMPS HAL, HID, LED, CCFL

specification notes Specify DL2RXMM for a fixture with a 5.28" trim plate, .055" thickness, and no return.

3.33" 85mm

Specify DL2RX for a fixture with a 5.28" trim plate and .15" thick return.

specification notes Specify DL5XMMP for a fixture with a 5.28" trim plate, .055" thickness, and no return. Specify DL5XP for a fixture with a 5.28" trim plate and .15" thick return. Lamp must be specified and ordered separately.

Lamp must be specified and ordered separately. 1.88" 48mm

1.75" 44mm

4.92" 125mm

Recommended LAMP AND beam spread GE 50w MR-16 Medium Flood EXK 30º Recommended spacing 15"-18" setback, 30" on center

Round Adjustable

ONLINE QUICK PRODUCT PAGE REFERENCE: DLCAT2RXM

DL2RXM

Round Wallwash Mirage®

ONLINE QUICK PRODUCT PAGE REFERENCE: DLCAT5XMP

DL5XMP

Round, adjustable downlight with deeply regressed lamp, up to 45º of tilt that can be locked in any position from the room side, and a sheer, .055" thick trim flange that is almost invisible against the ceiling. 1.88" round aperture. Accepts up to 3 effects devices, depending on lamp.

Be sure to check our website, luciferlighting.com, for detailed photometry reports, the most up-to-date product spec sheets, and installation instructions.

DL4XM

Lamp must be specified and ordered separately.

1.88" 48mm

Round Fixed

Products with MM suffix feature larger diameter trims to conceal miscut ceiling openings.

Round, wallwash downlight with an internal kick reflector with integral frosted lens for uniform, glare-free wallwashing and a sheer, .055" thick trim flange that is almost invisible against the ceiling. 1.75" round aperture includes Professional Baffle. Accepts up to 2 effects devices, depending on lamp. Patented design.

Enter an online quick product page reference into our website search field to go directly to a specific product page.

DL5XMP

x series downlights

DL11XM

LAMPS HAL, HID, LED, CCFL

2.30" 58mm

LAMPS HAL, LED 3.20" 81mm

specification notes Specify DL11X for a fixture with a 5.28" trim plate and .15" thick return. Lamp must be specified and ordered separately.

DL13XM

specification notes Specify DL13X for a fixture with a 5.28" trim plate and .15" thick return. Lamp must be specified and ordered separately.

1.75" 44mm

3.25" 83mm

4.92" 125mm

Round Fixed

ONLINE QUICK PRODUCT PAGE REFERENCE: DLCAT11XM

DL11XM

Round Adjustable Topper

ONLINE QUICK PRODUCT PAGE REFERENCE: DLCAT13XM

DL13XM

Round, fixed downlight with a sheer, .055" thick trim flange that is almost invisible against the ceiling. 1.75" round, die-cast aperture lens holder provides shallow lamp recess. Can be relamped from room side without removing trim from housing. Accepts up to 2 effects devices, depending on lamp.

DL12X

2.81" 71mm

Round, adjustable downlight with a sheer, .055" thick trim flange that is almost invisible against the ceiling, and up to 70ยบ of positively indexed tilt. 1.75" round, die-cast aperture lens holder provides shallow lamp recess. Can be relamped from room side without removing trim from housing. Accepts up to 2 effects devices, depending on lamp. Limited to low-voltage halogen or LED lamps.

LAMPS HAL, HID, LED, CCFL

specification notes Lamp must be specified and ordered separately.

specification notes Specify DL15X for a fixture with a 5.28" trim plate and .15" thick return.

2.81" 71mm

Lamp must be specified and ordered separately. 1.75" 44mm

1.75" 44mm

2.62" 67mm

4.92" 125mm

5.28" 134mm

Square Adjustable

ONLINE QUICK PRODUCT PAGE REFERENCE: DLCAT12X

DL12X

ONLINE QUICK PRODUCT PAGE REFERENCE: DLCAT15XM

DL15XM

Square, adjustable downlight with a square, .15" return flange and 30ยบ of tilt. 1.75" round, die-cast aperture lens holder provides shallow lamp recess. Can be relamped from room side without removing trim from housing. Accepts up to 2 effects devices, depending on lamp.

Be sure to check our website, luciferlighting.com, for detailed photometry reports, the most up-to-date product spec sheets, and installation instructions.

Round Fixed with Baffle

Products with MM suffix feature larger diameter trims to conceal miscut ceiling openings.

Round, fixed downlight with a sheer, .055" thick trim flange that is almost invisible against the ceiling. 1.75" round aperture, deeply regressed lens holder is vertically grooved for minimal glare. Can be relamped from room side without removing trim from housing. Accepts up to 2 effects devices, depending on lamp.

Enter an online quick product page reference into our website search field to go directly to a specific product page.

DL15XM

x series downlights

DL18XM

3.68" 94mm

LAMPS HAL, HID, LED, CCFL

specification notes Lamp must be specified and ordered separately.

specification notes 20w halogen flood BAB lamp for use in showers and baths. 50w halogen lamp best suited for porches and soffits outdoors. Fixture rated for 50w max halogen lamp.

3.13" 80mm

4.37" 111mm

DL21XCP

Listed for wet locations. Lamp must be specified and ordered separately.

1.83" 46mm 2.44" 62mm

5.45" 139mm

Recommended LAMP AND beam spread 20w MR-16 Flood BAB 35º

4.92" 125mm

Round Fixed Luna

ONLINE QUICK PRODUCT PAGE REFERENCE: DLCAT18XM

Round Adjustable Polymer Naiad Wet Location

ONLINE QUICK PRODUCT PAGE REFERENCE: DLCAT21XCP

Decorative, round, fixed downlight with a sheer, .055" chrome trim flange and deeply regressed lamp. An aluminum, stippled reflector supports an etched glass disk with a 2.44" diameter center aperture and chrome stem buttons. Accepts up to 2 effects devices, depending on lamp.

DL21XCP

Round, adjustable downlight with a .25", tapered, composite, polymer flange with integral silicone gasket and 45º of tilt that can be locked in any position from above. Includes Professional Baffle with frosted glass lens sealed over the 1.83" round trim aperture and listed for wet locations. Optional sealed, clear, glass lens is also available.

DL18XM

DL21X

3.13" 80mm

LAMPS HAL, HID, LED, CCFL

LAMPS HAL, HID

specification notes 20w halogen flood BAB lamp for use in showers and baths. 50w halogen lamp best suited for porches and soffits outdoors. Fixture rated for 50w max halogen lamp.

specification notes Specify DL41XMM for a fixture with a 5.28" trim plate, .055" thickness, and no return.

7.75" 197mm

Listed for wet locations. 1.88" 48mm 5.28" 134mm

Lamp must be specified and ordered separately.

Lamp must be specified and ordered separately. 2.84" 72mm 4.93" 125mm

Recommended LAMP AND beam spread 20w MR-16 Flood BAB 35º

Round Adjustable Naiad Wet Location

ONLINE QUICK PRODUCT PAGE REFERENCE: DLCAT21X

DL21X

Round, adjustable downlight with a .15" return, stainless steel flange with integral silicone gasket, and 45º of tilt that can be locked in any position from above. A frosted glass lens is sealed over the 1.88" round trim aperture and listed for wet locations. Optional sealed, clear, glass lens is also available.

Be sure to check our website, luciferlighting.com, for detailed photometry reports, the most up-to-date product spec sheets, and installation instructions.

Products with MM suffix feature larger diameter trims to conceal miscut ceiling openings.

Specify DL41X for a fixture with a 5.28" trim plate and .15" thick return.

Round Deep Cone Basso

ONLINE QUICK PRODUCT PAGE REFERENCE: DLCAT41XM

DL41XM

Round, fixed, Par 20-style downlight with deeply regressed lamp, a .055" thick trim flange that is almost invisible against the ceiling. An aluminum reflector with a 2.84" aperture provides an exceptionally high cut-off angle. Includes a rolled-edge baffle to eliminate aperture glare. Standard reflector is Stippled (SR); reflectors are also available in Specular Clear (CR – shown in photo), Specular Black (BR) and Champagne (CH). Accepts up to 3 effects devices.

Enter an online quick product page reference into our website search field to go directly to a specific product page.

DL41XM

x series downlights

DL42XM

LAMPS HAL, HID

0° to 25°

7.75" 197mm

LAMPS CFL 18w

specification notes Specify DL42XMM for a fixture with a 5.28" trim plate, .055" thickness, and no return.

7" 178mm

specification notes Specify DL51XMM for a fixture with a 5.28" trim plate, .055" thickness, and no return.

Specify DL42X for a fixture with a 5.28" trim plate and .15" thick return.

Specify DL51X for a fixture with a 5.28" trim plate and .15" thick return.

Lamp must be specified and ordered separately.

2.84" 72mm

3.70" 89mm 4.93" 125mm

4.93" 125mm

Round 25º Adjustable Deep Cone Basso

ONLINE QUICK PRODUCT PAGE REFERENCE: DLCAT42XM

DL42XM

Round, adjustable, Par 20-style downlight with deeply regressed lamp, a .055" thick trim flange that is almost invisible against the ceiling, and 0º-25º of tilt that can be locked in any position from the room side. 2.84" round aperture. Includes a rollededge baffle to eliminate aperture glare. Standard reflector is Stippled (SR); reflectors are also available in Specular Clear (CR – shown in photo), Specular Black (BR) and Champagne (CH). Accepts up to 3 effects devices.

Round Fixed Deep Cone CFL

EFFICIENCY notes 47% fixture efficiency with Specular Clear Reflector.

ONLINE QUICK PRODUCT PAGE REFERENCE: DLCAT51XM

DL51XM

DL43XM

Round, fixed, CFL-style downlight with deeply regressed lamp, a .055" thick trim flange that is almost invisible against the ceiling. An aluminum reflector with a 3.70" aperture provides an exceptionally high cut-off angle of 50º, eliminating glare. Includes a rolled-edge baffle to eliminate aperture glare. Reflectors available in Stippled (SR), Specular Clear (CR – shown in photo), Specular Black (BR) and Champagne (CH).

LAMPS HAL, HID

0° to 45°

7.75" 197mm

specification notes Specify DL43XMM for a fixture with a 5.28" trim plate, .055" thickness, and no return. Specify DL43X for a fixture with a 5.28" trim plate and .15" thick return. Lamp must be specified and ordered separately.

2.84" 72mm 4.93" 125mm

Round 45º Adjustable Deep Cone Basso

ONLINE QUICK PRODUCT PAGE REFERENCE: DLCAT43XM

DL43XM

Round, adjustable, Par 20-style downlight with deeply regressed lamp, a .055" thick trim flange that is almost invisible against the ceiling, and 0º-45º of tilt that can be locked in any position from the room side. 2.84" round aperture. Includes a rolled-edge baffle to eliminate aperture glare. Standard reflector is Stippled (SR); reflectors are also available in Specular Clear (CR – shown in photo), Specular Black (BR) and Champagne (CH). Accepts up to 3 effects devices.

Be sure to check our website, luciferlighting.com, for detailed photometry reports, the most up-to-date product spec sheets, and installation instructions.

Products with MM suffix feature larger diameter trims to conceal miscut ceiling openings.

Enter an online quick product page reference into our website search field to go directly to a specific product page.

DL51XM

specialty fixtures

SPECIALTY downlights

overview Lucifer Lighting makes a variety of trims for specialty applications. Visibly striking shapes, contours, and materials are designed to bring added glamour to the interior space. For making a bold statement, consider the unique detailing on these trims, including machined aluminum, powder coated black gimbals, or a translucent lens and skirt. The following trims require specialty housings.

WILSON CORPORATE HEADQUARTERS Chicago, IL Adjustable fixtures contribute to the architectural statement by mimicking design elements like graphics and furniture; the light highlights interior decorating pieces, no matter how theyâ&#x20AC;&#x2122;re positioned. Interiors: Gensler Fixtures: DLJ2 (p 44)

specialty DOWNLIGHTS

DLJ1

LAMPS HAL, LED

LAMPS HAL (37w Max), LED, HID (consult factory) 11.50" 292mm

specification notes Lamp must be specified and ordered separately.

8.25" 210mm

9.50" 241mm

6.25" 159mm

Recommended for use with 37w IR lamp. Lamp must be specified and ordered separately.

1.00" 25mm 4.5" 114mm

6.25" 159mm

ONLINE QUICK PRODUCT PAGE REFERENCE: DLCATJ1

DLJ1

Lucid

1.8" 46mm

ONLINE QUICK PRODUCT PAGE REFERENCE: DLCATNIC-LD

DH-NIC-LD

Adjustable downlight frame encloses a 15/16" deep, black recess that contains a black, spherical lamp holder with a black, regressed baffle. Lamp holder is fully rotatable and tilts 25º in all directions; lamp retainer swivels and can be relamped from the room without removing the trim from housing. Accepts up to 2 effects, depending on lamp.

DLJ2

Combination downlight and housing functions as an adjustable downlight. Zero-sightline, translucent lens glows when lamp is illuminated and conceals housing interior from view. For use in non-IC accessible and non-accessible ceilings. Adjustable appliqué system accommodates ceilings up to 1" thick. Patent pending.

LAMPS HAL, LED

LAMPS HAL (50w Max), LED

10" 254mm

14.10" 358mm

specification notes Lamp must be specified and ordered separately.

2.95" 75mm

5.75" 146mm

6.25" 159mm

specification notes For zero-sightline applications only. DH-NIC-AK No perimeter border or lens DH-NIC-AKS Translucent perimeter border

1.5" 38mm

DH-NIC-AKB Bronze perimeter border 3" 76mm

1.75" 44mm 10.13" 257mm

4.86" 124mm

9.10" 231mm

DH-NIC-AKL Translucent perimeter border and translucent lens DH-NIC-AKBL Bronze perimeter border and translucent lens Lamp must be specified and ordered separately.

Java 2

ONLINE QUICK PRODUCT PAGE REFERENCE: DLCATJ2

Twin Rectangle

ONLINE QUICK PRODUCT PAGE REFERENCE: DLCATNIC-AK

DH-NIC-AK

DLJ2

Dual, adjustable downlight frame enclosing a 15/16" deep, black recess that contains two black, spherical lamp holders with black, regressed baffles. Lamp holders are fully rotatable and tilt 25º in all directions; lamp retainers swivel and can be relamped from the room without removing the trim from housing. Accepts up to 2 effects devices, depending on lamp.

Combination downlight with housing and translucent perimeter border below ceiling line; perimeter border also available in bronze finish. Comes with twin, integral, Mach-style lamp holders for adjustments in two axes: 45º of tilt in length and 30º in width. For use in non-IC accessible and non-accessible ceilings up to 1" thick. Available with optional translucent lens to conceal lampholders. Patent pending. DH-NIC-AKL

Be sure to check our website, luciferlighting.com, for detailed photometry reports, the most up-to-date product spec sheets, and installation instructions.

DH-NIC-LD

specification notes For zero-sightline applications only.

5.13" 130mm

1.75" 44mm

Java 1

Enter an online quick product page reference into our website search field to go directly to a specific product page.

DH-NIC-AK

housings overview

Specifying a Housing

Housings are the metal compartments that contain wiring, thermal sensors, and power supplies. These components are framed in above the ceiling and their use is a product safety requirement mandated by the National Electric Code.

To correctly specify the appropriate housing, the following factors must be considered:

HOUSINGS

Is this new construction or a remodel? If the project is new, interior construction and/or enclosed exteriors, is the insulation non-IC (at a 3" setback) or IC (insulation contacting housing). Note: NIC stands for non-insulated ceiling; IC stands for insulated ceiling. If the project is a remodel, the housing will be installed in the existing ceiling through a new cutout in the existing ceiling panel. Is a specialty fixture specified? If so, please refer to the specialty housing section. What is the power supply? While some lamps utilize mains voltage power directly from the building service, most HAL, HID, and CFL fixtures utilize a transformer or ballast to power the light source. Lucifer Lighting offers magnetic and electronic low voltage power supplies, but suggests using electronic wherever possible as they are energy efficient, quiet, lightweight, easily accessible, and in most cases do not require an interface with control systems. Once these determinations have been made, refer to pages 48-52 to select the correct housing for any Lucifer Lighting downlight.

Marion Oliver McCaw Hall Seattle, WA A large, decorative, glass chandelier retains its position at center stage, even as a series of downlights illuminate the wall planes with warmer light. The linear layout of downlights complements the strong verticality of the architecture. Architecture: LMN Architects Interiors: Deborah Sussman Lighting: Horton Lees Brogden Lighting Design Fixture: DL5XMP (p 35)

HOUSINGS

CHOOSING THE RIGHT HOUSING Housings from Lucifer Lighting come in a variety of ratings and fall into one of three categories: Universal modular housings for standard new construction. Specialty housings and trims. Housings for remodel applications.

Housings are distinguished by their accessibility, small scale, superb heat management, and power supply compatibilities. Housings are rated for a range of applications requiring IC, ASTM E283 Airtight, and Chicago Plenum rated housings, as well as for installations that do not require special ratings.

NIC IC

HOUSINGS

universal housings for STANDARD NEW CONSTRUCTION

CP NIC

UNIVERSAL NIC Housings

UNIVERSAL IC Housings

Recessed housing for use with recessed downlight trims in non-IC accessible and non-accessible ceilings up to 1" thick. Maximum 75w MR-16, 39w HID, or 18w CFL lamp usage. Housing is fabricated to accept downlight trims with minimal trim flange overlay over ceiling line. (Note: Zero-sightline option available. Order appliquĂŠ separately.) Transformer compartment and all splice connections may be serviced from room side. HID, CFL and Par 20 lamp versions come with extended top. The low profile housing is the HAL version for use with MR-16 halogen lamp. Hangar bars are included with all versions and can be fitted to all sides of the housing allowing installation in spaces as narrow as 9".

Recessed housing for use with recessed downlight trims in IC accessible and non-accessible ceilings up to 1" thick. Maximum 50w MR-16, 39w HID, or 18w CFL lamp usage. Housing is fabricated to accept downlight trims with minimal trim flange overlay over ceiling line. (Note: Zero-sightline option available. Order appliquĂŠ separately.) Transformer compartment and all splice connections may be serviced from room side. The IC housing is certified Chicago Plenum and ASTM E283 Airtight. Hangar bars are included.

10.9" 276mm

Not rated for contact with insulation material. Rated for contact with insulation material.

CCEA-Chicago Plenum rated.

Rated ASTM E283 Airtight.

3.7" 94mm (HAL)

5.04" 128mm (HID)

7" 177mm (CFL / Par 20)

3.25" 83mm

7" 177mm

6.3" 160mm

16.3" 413mm

6.3" 160mm (Aperture Centerline)

6.8" 172mm

12" 305mm

7.2" 185mm (Aperture Centerline)

SPECIFYING UNIVERSAL HOUSINGS To find a spec sheet for universal modular housings for standard new construction, create the appropriate model by following the logic outlined in the chart below. Complete spec sheets are available online at luciferlighting.com.

Be sure to check our website, luciferlighting.com, for detailed photometry reports, the most up-to-date product spec sheets, and installation instructions.

EXAMPLE: DH-IC-ZO-HID-20-120E

HOUSING

RATING

SERIES

LIGHT SOURCE

MAX WATTS

POWER SUPPLY (primary)

IC IC, Airtight, CCEA NIC Non-IC

XF X Series Flange Overlay ZF Z Series Flange Overlay ZO Z Series Zero-Sightline

HAL Halogen Low Voltage P20HAL Par 20 Halogen

75 (NIC only) 50 (IC only)

MV Halogen Mains / Line Voltage HID Metal Halide P20HID Par 20 Metal Halide

75 (NIC), 50 (IC) 39 20

LED

Light Emitting Diode

120E 120v Electronic 277E 277v Electronic 120T 120v Torroidal (50w only) 120M 120v Magnetic 277M 277v Magnetic REM Remote 120 120v Mains Voltage 120E 120v Electronic 277E 277v Electronic REM Remote 120E 120v Electronic

CCFL CFL

Cold Cathode Fluorescent Compact Fluorescent

10 18

120E 120v Electronic UNI Universal

HOUSINGS

SPECIALTY HOUSINGS NIC

NIC

SPECIALTY / remodel HOUSINGS

NIC

DH-NIC-JVC1

DH-NIC-JVC2

DH-NIC-SM2

DH-NIC-TZ (LINEA)

Chicago Plenum rated recessed housing for use in accessible and non-accessible, non-insulated ceilings up to 1" thick, complete with integral electronic transformer. Is also available with magnetic 120v and 277v transformer. Can be ordered for use with remote transformer. Transformer and all electrical components serviceable from below. Steel hanging bars and brackets are also included.

Chicago Plenum rated recessed housing for use in accessible and non-accessible, non-insulated ceilings up to 1" thick, complete with twin integral electronic transformers. Can be ordered for use with remote transformer. Transformers and all electrical components serviceable from below. Steel hanging bars and brackets are also included.

Recessed housing for use in accessible and non-accessible, non-IC ceilings up to 1" thick, complete with twin integral electronic transformers. Can be ordered for use with remote transformer. This housing accepts a combination of two square trims which can be fixed (DL31ZP), adjustable (DL25Z or DL38ZP) or wallwash (DL35ZP). All trims can be interchanged and are ideal for retail applications where displays are being changed and the lighting requirements must adapt. Housing is only offered in zero-sightline and is supplied with Model DLA-APP-SM2 appliqué kit. It incorporates a reinforcing zinc plated steel screen for applying joint compound when used in a drywall or plaster ceiling. Transformers and all electrical components serviceable from below. Steel hanging bars and brackets are also included.

Recessed housing(s) for use in accessible and non-accessible ceilings up to 1" thick with remote magnetic or electronic transformer(s), or integral electronic transformer(s). Housings stand alone without framing accessory, or can be positioned serially in optional accessory frame, which makes them ideal for display applications. Round contoured housing without accessory frame accommodates diverse ceiling framing conditions. Framing construction ensures consistently aligned on-center spacing of fixtures; trims are interchangeable and can be circuited independently. For use with 37w IRC halogen lamp. Will accept any of the Z Series trims for zero-sightline or flange overlay applications. Transformer(s) and splice compartment(s) are serviceable from below. Steel hanging bars and brackets are included.

For use with HAL and LED only.

DH-NIC-TZO-1* For zero-sightline**, single unit

11.50" 292mm

18.38" 467mm

6.50" 165mm

9.50" 241mm 16.38" 416mm

5.13" 130mm 6.50" 165mm

5.38" 137mm

1.00" 25mm 5.38" 137mm square

NIC

1.00" 25mm

DH-NIC-TZF-1* For Flange Overlay, single unit

9.00" 229mm

7.50" 191mm

5.13" 130mm

18.38" 467mm

7.60" 193mm

*Specify 1 for single unit, 2 for dual units, or 3 for triple units

17.20" 436mm

5.13" 130mm

NIC

5" 127mm

4.20" 107mm

DH-NIC-AK

DH-NIC-LD

Combination downlight and housing with available translucent perimeter border below ceiling line (also available in bronze finish). Housing comes with twin, integral Mach style lamp holders for adjustments in two axes. Lampholders tilt 45° in length axis and 30° in width axis. For use in non-IC accessible and non-accessible ceilings up to 1" thick. Housing fabricated to provide zero-sightline on ceiling plane and is available with an optional translucent lens to conceal lampholders. Patent pending. See page 45 for border style and lens specifications.

Combination downlight and housing suitable as an adjustable downlight. Fixture is only offered with a zero-sightline translucent lens which glows when illuminated and which conceals housing interior view. For use in non-IC accessible and non-accessible ceilings. Housing is fabricated to provide for zero-sightline only and is supplied with adjustable appliqué system to accommodate ceilings up to 1" thick. It incorporates a reinforcing zinc plated steel screen for applying joint compound when used in a drywall or plaster ceiling. Steel hanging bars and brackets are also included. Patent pending.

10.20" 259mm

6" 152mm

9.20" 234mm

6.25" 159mm (single)

12.5" 318mm (dual)

18.75" 476mm (triple)

3 2

6" 152mm

11.50” 292mm

10" 254mm

2.95" 75mm

9.50” 241mm

8.25” 210mm

DH-NIC-RM (REMODEL HOUSING)

5.75" 146mm 1.5" 38mm

5.13” 130mm 3" 76mm

4.86" 124mm

9.10" 231mm

1.00” 25mm 4.5" 114mm

1.8" 46mm

Recessed housing for use in existing, non-insulated construction, complete with integral transformer. For use with X Series trims. Can be ordered for use with remote transformer. Splice compartment and transformer assembly include adjustable leg for support and balancing in ceiling. Supplied with retractable mounting clips to accommodate ceiling thickness of 1/2" to 1 1/4". Splice compartment front is removable for easy access and is mechanically secured by spring clips. Splice compartment is provided with five 5/8" knockouts. For use with HAL only.

Be sure to check our website, luciferlighting.com, for detailed photometry reports, the most up-to-date product spec sheets, and installation instructions.

Ø 3.36" 85mm

** For zero-sightline applications, specify appliqué DLA-APP-Z-RD-T for round trims, or appliqué DLA-APP-Z-SQ-T for square trims.

NIC

14.10" 358mm

11.28" 287mm

5.97" 152mm

3.47" 88mm

4.68" 119mm

4.50" 114mm Inside Dia. 4.50" 114mm Lip Dia.

Z SERIES

LED

CCFL

CFL

HID

HALOGEN

LIGHT SOURCE

DH-NIC-TZF

DH-NIC-TZO

DH-NIC-SM2

DH-NIC-JVC2

DH-NIC-JVC1

DH-NIC-RM

DH-NIC-XF

DH-IC-XF

DH-NIC-ZF

DH-IC-ZF

DH-NIC-ZO

trim

DH-IC-ZO

HOUSINGS quick reference product compatibility table

housing

DL1ZP DL2DGZP DL2RZP DL5ZP DL6ZP DL9ZP DL11Z DL15Z DL21Z DL21ZCP DL23Z DL24Z DL25Z DL31ZP DL32DGZP DL35ZP DL36ZP DL38ZP DL39ZP DL61ZP DL65ZP DL66ZP DL69ZP DL72Z

X-SERIES

DL1XM DL2RXM DL4XM DL5XMP DL11XM DL12X DL13XM DL15XM DL18XM DL21X DL21XCP DL41XM DL42XM DL43XM DL51XM

JAVA SERIES

SEYFARTH SHAW Chicago, IL A mixture of fixtures and mounting techniques creates a variety of effects that help define different seating areas and accent the architecture. This is an AIA Gold Award winning project.

DLJ1 DLJ2

Interiors: Gensler Lighting: Mitchell B. Kohn Lighting Design Fixtures: DL15XM (p 37), DLJ1 (p 44)

center foot candles

beam diameter (FT)

center foot candles

2900º

12-20-HL-SP

0.4

610

0.7

409

0.7

196

1.3

105

24º

2900º

12-20-HL-MF

1.9

5.8

40º

2900º

12-20-HL-FL

1.2

2.5

7.8

1.6

24º BEAM SPREAD

40º BEAM SPREAD

15º

3050º

12-50-HR-SP

1.1

481

1.6

243

210

1.4

229

3.1

30º

3050º

12-50-HR-MF

2.1

111

4.6

6.1

40º

3050º

12-50-HR-FL

2.8

6.1

8.1

3.4

7.7

11.6

10.2

50W

15º BEAM SPREAD

30º BEAM SPREAD

40º BEAM SPREAD

10º

3000º

12-37-HRIR-SP

1.1

568

1.3

394

1.9

235

1.3

289

2.6

122

3.8

25º

3000º

12-37-HRIR-MF

1.9

150

3.8

5.8

35º

3000º

12-37-HRIR-FL

2.4

5.1

7.7

6.4

9.8

60º

3000º

12-37-HRIR-WF

10º

3000º

12-50-HRIR-SP

1.1

601

1.4

472

1.9

301

1.3

322

2.5

148

3.8

25º

3000º

12-50-HRIR-MF

1.8

171

3.7

5.9

35º

3000º

12-50-HRIR-FL

2.3

104

4.9

7.9

2.8

6.3

9.9

60º

3000º

12-50-HRIR-WF

MR-16 CERAMIC 20W METAL HALIDE

12º

3000º

120-20-MH-SP

0.7

888

1.4

318

2.1

166

25º

3000º

120-20-MH-MF

1.3

245

2.7

4.2

1.8

114

3.9

40º

3000º

120-20-MH-FL

2.3

5.2

2.8

6.3

10.5

MR-16 IR HALOGEN

37W

50W

10º BEAM SPREAD

25º BEAM SPREAD

10º BEAM SPREAD

35º BEAM SPREAD

25º BEAM SPREAD

12º BEAM SPREAD

35º BEAM SPREAD

25º BEAM SPREAD

40º BEAM SPREAD

12º

3000º

120-39-MH-SP

0.7

1584

1.6

561

2.5

307

1.4

396

3.3

140

25º

3000º

120-39-MH-MF

2.1

176

4.9

7.5

40º

3000º

120-39-MH-WF

2.9

6.6

3.6

8.2

12.6

39W

12º BEAM SPREAD

MR-16 12v 5W 2700ºK LED

25º BEAM SPREAD

40º BEAM SPREAD

10º

2700º-3100º

12-5-LED-SP

0.5

1.2

25º

2700º-3100º

12-5-LED-MF

2.4

1.5

3.7

4.9

2.5

6.1

10º BEAM SPREAD

Lighting and Interiors: Gensler Fixture: DL4X (p 35)

beam diameter (FT)

10º

MR-16 HALOGEN

The airy effect of the floating, overhead panels is enhanced with deep cone downlights that provide wide, uniform coverage and compliment the chrome accents, from trims, to mirrors and structural materials. Crisp light, evenly diffused ensures food appears fresh.

DISTANCE from source (FT)

LUCIFER lighting part no.

center foot candles

color temp

beam diameter (FT)

beam spread

DISTANCE from source (FT)

wattage

20W

light source

10º BEAM SPREAD

WAGAMAMA RESTAURANT Boston, MA

DISTANCE from source (FT)

LAMP options

PAR 20 HALOGEN

50W

25º

2900º

120-50-PAR20-FL

PAR 20 CERAMIC METAL HALIDE

35W

30º

2900º

120-35-MH-PAR20-FL

COMPACT FLUORESCENT

18W

—

2700º-4100º

120-18-CF-27

Lucifer Lighting’s downlight fixtures have been engineered to provide optimal results with the lamps listed in this chart. All of these lamps can be ordered directly from Lucifer Lighting and are available preinstalled in the fixture, saving time and ensuring quality. We have found that generic lamp sources frequently do not meet our quality and performance standards. The HID, CFL, and LED lamps listed in this chart are energy code-compliant and fulfill ASHRAE standards for LEED certification.

25º BEAM SPREAD

Lamp photometric tables are estimated using available manufacturer's bare lamp data and assume standard reflectances of 80% ceiling, 50% walls and 20% floor. Check our website for detailed photometric reports. Consult factory for complete fixture photometrics.

The halogen IR lamps shown in this chart are also appropriate for installations where energy codes and ASHRAE permit low wattage halogen in special applications, such as retail displays, art galleries, or task areas like receptions, executive offices, or conference rooms. Please be aware that HID light sources are not instant-on or dimmable. We also recommend working with a lighting consultant when specifying fixtures and lamps. The International Association of Lighting Designers, IALD.org, can assist in locating a trained lighting professional.

DOWNLIGHTS

At Lucifer Lighting, we are keenly aware of our responsibility to create products that are both environmentally-friendly and high-quality. We have a comprehensive environmental action plan in place that ensures our products are manufactured in the most sustainable way possible. Here are a few of the steps we have already taken: Every one of our products can be controlled by occupancy and photo sensors that reduce energy usage by automatically turning off lights when they are not required. Many of our fixtures use alternative, lower energy-consuming light sources including fluorescent, metal halide, and Light Emitting Diodes (LEDs). Our products are packaged in post-consumer recycled content. This brochure was printed with low VOC, vegetable-based ink at Cenveo, on CenturaÂŽ, an FSC-certified, 10% postconsumer recycled fiber paper from Stora Enso, which has received the highest score on the Dow Jones Sustainability index for seven consecutive years.

[ 101609]

luciferlighting.com

3750 IH35 North San Antonio, Texas 78219 USA [ PH ] +1 210 227 7329 [FAX] +1 210 227 4967

ÂŠ2009 Lucifer Lighting Company As part of its policy of continuous research and product development, the company reserves the right to change or withdraw specifications without prior notice.