FORD 3000
www.qtponline.com Email info@qtponline.com Telephone 00 353 44 934 1638
I
BLY M E S AS TION C U NSTR
INSTRUCTIONS TRAKTÖRLERE BY-PASS SİSTEMLİ EMNİYET SİBOBLU HİDROLİK DİREKSİYON SİSTEMİ TRACTORS POWER STEERING CONVERSION KIT WITH BY-PASS SYSTEM INSTALLING INSTRUCTION
FORD 3000 1
INSTALLING INSTRUCTIONS FOR POWER STEERING-CONVERSION WITH BYPASS 2000-3000-3600-3610 FORD TRAKTÖRLERKIT İÇİN BY-PASS SİSTEMLİ EMNİYETSYSTEM. SİBOPLU HİDROLİK DİREKSİYON SİSTEMİ MONTAJ ŞEKLİ
1. Yağ deposu monte edilecek. 2. Hidrolik yağ pompası takılacak. 1. Assemble reservoir 3. Lift bağlantı kulağı monteoil edilecek. 4. Sol çiftli2. rot takılacak. Assemble hydraulic oil pump 5. Sağ tekli rot takılacak. 3. Mount the lift assembly bracket 6. Valf ve piston takılacak. 7. Alt ara rot rotleft bağlandıktan sonra ön tekerleklerin arası 8 mm. 4. takılacak. MountAra the side double top arm kapalı olacak. 8. Uzun rot5. takılacak. Mount the right side double top arm 9. Depodan hidrolik pompaya 5/8 R6 hortum takılacak. 6. Assemble the steering ram to the tractor 10. Hidrolik pompadan lifte 5/16 R1 hortum takılacak. 11. Valften7. depoya geri dönüş 3/8drag R6 hortum Assemble the line -takılacak. after this installation adjust 12. Hidrolik direksiyon yağı (Special Sae 10 veya 20 numara) 8. The long rod will be installed 13. Hidrolik basınç sübabı. Not: Montajdan 1 hafta sonra bağlantı vidaları ve hortumları kontrol edilecek. 9. 5/8 R6 hose from reservoir to oil pump
10. Pressure 5/16 R1KITS fromWITH oil pump toSYSTEM lift HYDRAULIC STEERING hose CONVERSION BY-PASS AND SECURITY VALVE FOR 2000 - 3000 - 3600 - 3610 FORD TRACTORS 11. Return Hose 3/8 R6 from lift to reservoir ASSEMBLING INSTRUCTION
www.qtponline.com Email
Sanayi Bölgesi T. Ziyaeddin Cad. info@qtponline.com 42300 Konya / TÜRKİYE
Telephone 00 353 44 934 1638 ahs.com.tr • Web : www.ahs.com.tr
) 239 13 33 (Pbx) • Faks : +90 (332) 239 14 56
1. Assemble oil reservoir. 12. After mounting, use special Sea 10 or 20 to start the 2. Assemble hydraulic oil pump. enginebracked. & check the oil level. Add more oil if necessary 3. Mounth lift assembly 4. Mounth13. Hydraulic left side doublepitman arm. valve pressure 5. Mounth right side single pitman arm. 6. Assemble valve and piston. 7. Assemble drag lin. After this installation adjust distance to 8 mm. For front wheels. 8. The longPlease rod will be installed. Note: 9. 5/8 R6 hose from reservoir oil pump. Check fasteningtobolts and hoses after one week. 10. Pressure hose 5/16 R1 from oil pump to lift. 11. Return hose 3/8 R6 from lift to reservoir. 12. After mounting use special sae 10 or 20 to start the engine and check the oil level add some more if necessary. 13. Hydraulic pressure valve. Note: Check fastening bolts and hoses after 1 week.
9
10 11
2 6 10 11 3
4
13 8 7
7
5