Page 1

EPOXY

ACRYLIC

POLYURETHANE

SUPER GLUE

UNIVERSAL GLUE

SPEEDY-BOND

Two-part curing Strongest structural adhesive (vs. urethane and acrylic) – high shear and peel strength Highest temperature resistance (vs. urethane and acrylic) Cures under a wide range of temperature(but above 5°C) and humidity Excellent resistance to solvents, salt water, UV light, impact Bonds/drys in 5 minutes Gains full strength in 12 hours Do NOT clamp Good for filling spaces between surfaces Typical way of usage: Repair pipe, tank leaking, Valve repair, Water tank repair. In offer: Clear and Black (steel filled) in syringe or tube

Two-part curing High strength bonding without the surface preparation (vs. urethane and acrylic) Bonds to a wide variety of materials. Even hardto-bond plastics and oily metals Cures under a wide range of temperature(but above 5°C) and humidity Excellent resistance to solvents, salt water, UV light, impact Bonds/drys in 5 minutes Gains full strength in 12 hours No need to clamp Good for filling spaces between surfaces Typical way of usage: Repair pipe, tank leaking, Valve repair, Water tank repair. In offer: Clear, Semi-clear and Black (steel filled) in tube

Swells as it cures Excellent adhesion on glass and metal surface Permanently flexible Outstandnig durability Hardens in 10 min Gains full strength in 6 hours Apply in a thin layer and clamp Good moisture resistance Typical way of usage: automotiv windows windshield assembly, body assembly, sealing, vibration reduction in crash body repair

Cyanoacrylate Not actually used structurally due to its brittleness (low shear strength) Hardens in 15 seconds Best on low-porosity materials. Not recommended to use on glass Useful for small repairs that are not subject to much stress or movement and where the fit must be tight Typical way of usage: household repairs, as a temporary clamp while stronger glue hardens by adding a small amount to the ends of the pieces being joined. See video:

Solvent based, neoprene Good adhesion to various materials Hardens in 15 min, gains full strength in 24 hours High solid content, strong adhesion, heat insulation, antiaging Friendly to environment No need to clamp, but works best when bonded surfaces are strongly pressed together Used for bonding building materials in external architecture Typical way of usage: daily repairs of shoes, furniture, leather sofa, floor, table tops, wallpaper.. Can be used also for fireproof, aluminum, bamboo - board, polyester plywood, etc.

Two-part curing (powder and adhesive) Unique reinforcing and filling capabilities Hardens in 7 seconds Good for filling spaces between surfaces In offer: Grey and Black Typical way of usage of Black powder: bumper, grills, electrical switches, hard plastic, motorcycle fairings I Grey powder: aluminum, metal surfaces, carburetors (petrol, oil, heat resistant) Store in cool area out of direct sunlight See video:

Wood / Plywood

Metal

Rubber

PVC*

Glass

Plastic

Epoxy

Epoxy

Epoxy

Epoxy

Epoxy

Epoxy

Acrylic

Acrylic

Acrylic

Acrylic

Acrylic

Polyurethane

Polyurethane

Polyurethane

Super

Super

Super

Universal

Universal

Universal

Fabric, Paper, Leather

Universal

Fiberglass

Poly-carbonate

Plaster

Epoxy Polyurethane

Universal

Canvas

Acrylic

Acrylic

Universal

Universal

Ceramic/ Brick

Concrete

Epoxy

Epoxy

Acrylic

Polyurethane

Super

Super

Super

Universal

Universal

Universal

Super Universal

Universal

Universal

Glues leaflet  
Glues leaflet  
Advertisement