Page 1

Week 10 This week we went to the pavilion site and listened to the builder explaining the construction of the buildings.

The drain inside the wall has small holes at the top that let the moisture in the wall get in. Other brick concrete wall has high dense brick that achieve selfwaterpro

These are LVT (Laminated veneer timber) which made by glued cross section timber pieces under pressures. Therefore it is a very strong and replaceable material. In this site it’s meanly used in formwork of the site cast concrete and these two ways: For the first part we are introduced the retaining site cast concrete wall:

Support and connect the plywood board

Week 10 It is the other kind of supporting. However there is some difference between the site placed and the model from the manufactured company (CarterHoltharvey 2013). The vertical element is doubled to strength the supporting.

The fixing of the steel frame of the main building can be showed by the sketch below:

The steel plate that weld with the frame create a larger connecting surface with the concrete floor, hence under the stress, the connection will have less deflection. Sketch blow shows the siting window:

Week 10 This is the tong and groove timber plate that used on the surface of the wall:

The beam is C-section, together they resistant bending and shearing of the structure with lightest steel using. (Chin, 2008)

This structure also used on floor structure. The connection also stronger under loads. The Z-purlin is introduced too:

This is the waterproofing sheet that used to protect the concrete wall from corrosion of moisture. Sketch blow shows the bar chair with the steel reinforcement sit on it.

Week 10

Reference list: Francis D.K. Chin (2008), Building constructing illustrated, Fourth Edition CarterHoltharvey 2013, Engineered Wood Product, CarterHoltharvey, Australia, viewed 11th October 2013, < >

Read more
Read more
Similar to
Popular now
Just for you