INTERIOR SIGNAGE SPEC
BELLEVUE SIGN SOLUTION
WHETHER OUR CLIENTS ARE WORKING TOWARD OBTAINING LEED CERTIFICATION OR THEY ARE SIMPLY LOOKING FOR WAYS TO PROMOTE AND CREATE A MORE GREEN FRIENDLY ENVIRONMENT, WE WANT OUR CUSTOMERS TO BE ABLE TO SAY, “EVEN OUR SIGNS ARE GREEN!” WITH A NAME LIKE ACORN, WE'VE GOT TO BE ENVIRONMENTALLY CONSCIOUS!
AND WE ARE!
Acorn Sign Graphics
SECTION 10440 INTERIOR SIGNAGE Bellevue Display hidden notes to specifier. (Don't know how? Click Here)
NOTE TO SPECIFIER ** Acorn Sign Graphics; Interior Signage. This section is based on the products manufactured by Acorn Sign Graphics, which is located at: 4109 West Clay Street Richmond, VA 23230-3307 Tel: (800) 770-4744 Tel: (804) 726-6999 Fax: (804) 726-6998 Email: firstname.lastname@example.org Website: www.acornsign.com All Acorn Sign Graphics (ASG) interior packages meet ADA regulations. In-house product design and manufacturing capabilities give ASG the ability to provide high quality architectural signage and strong project management support. ASG is committed to a sustainable philosophy, which is reflected throughout the company practices and in eco-friendly design, fabrication and products. ASGâ€™s factory direct sales force, along with the sales support team, most expertly addresses the needs of the Architect, Designer and Property Owner. PART 1GENERAL 1.1 SECTION INCLUDES ** NOTE TO SPECIFIER ** Remove items below not required for project. A.
1.2 RELATED SECTIONS ** NOTE TO SPECIFIER ** Remove any sections below not relevant to this project; add others as required.
Section 10410 - Directories.
Section 10420 - Plaques.
Section 10430 - Exterior Signage.
ANSI 117.1 – For Buildings and Facilities
ASTM International (ASTM) D635 - Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position.
ASTM International (ASTM) E84 - Standard Test Method for Surface Burning Characteristics of Building Materials.
ASTM International (ASTM) D1929 - Standard Test Method for Determining Ignition Temperature of Plastics.
Underwriters Laboratories (UL) 94 - Tests for Flammability of Plastic Materials for Parts in Devices and Appliances.
Underwriters Laboratories (UL) 723 - Standard for Test for Surface Burning Characteristics of Building Materials.
ASTM E2072-04 - Standard Specification for Photoluminescent (Phosphorescent) Safety Marketing.
ASTM E2073-02 - Standard Test Method for Photopic Luminance of Photo Luminescent (Phosphorescent) Markings.
PERFORMANCE REQUIREMENTS A.
Provide photopolymer signage that conforms to the requirements of all regulatory agencies holding jurisdiction and the quality control of ASG. ** NOTE TO SPECIFIER ** Retain the next paragraph only if glow in the dark signage is specified. B.
Provide glow in the dark, photo luminescent material that complies with applicable provisions of ASTM E 2073-02 and DIN 67510. Photo luminescent material must have up to eight hours of luminance. ** NOTE TO SPECIFIER ** Remove the next paragraph if ADA conformance is not required. C.
Requirements: 1. Comply with all applicable provisions of the 2010 ADA Standards for Accessible Design. 2. Depth. Raised characters shall be 1/32 inch (0.8 mm) minimum above their background. 3. Case. Characters shall be uppercase. 4. Style. Characters shall be sans serif. Characters shall not be italic, oblique, script, highly decorative, or of other unusual forms. 5. Character Proportions. Characters shall be selected from fonts where the width of the uppercase letter “O” is 55 percent minimum and 110 percent maximum of the height of the uppercase letter “I”. 6. Character Height. Character height measured vertically from the baseline of the character shall be 5/8 inch (16 mm) minimum and 2 inches (51 mm) maximum based on the height of the uppercase letter “I”.
Finish and Contrast. Characters and their background shall have a non-glare finish. Characters shall contrast with their background with either light characters on a dark background or dark characters on a light background. Braille. Braille shall be contracted (Grade 2) and shall comply with Chapt. 7, Section 703.3 and 703.4 (2010 ADA Standards for Accessible Design). Braille Position. Braille shall be positioned below the corresponding text. If text is multi-lined, Braille shall be placed below the entire text. Braille shall be separated 3/8 inch (9.5 mm) minimum from any other tactile characters and 3/8 inch (9.5 mm) minimum from raised borders and decorative elements. Symbols of Accessibility. Accessible facilities are required to be identified using the international symbol of accessibility. Complete Code Compliance. Please reference Chapt. 7, Section 703 (2010 ADA Standards for Accessible Design) for additional information / exceptions not listed here, to ensure signs meet full compliance.
Fire Performance Characteristics: 1. Provide photopolymer signage with surface burning characteristics that consist of a flame spread of 75 and a smoke development of 120 when tested in accordance to UL 723 (ASTM E 84). 2. Self-Extinguishing: Provide photopolymer signage with a CC1 classification for .060 in thick material when tested in accordance with the procedures in ASTM D 635, Standard Test Method for Rate of Burning and/or Extent and Time of Burning Plastics in a Horizontal Position. 3. Vertical Burn: Provide photopolymer material that is classified as 94V-2 for material .118 in thick or greater and 94HB for material .118 in thick or less when tested in accordance with UL 94, Tests for Flammability of Plastic Materials for Parts in Devices and Appliances. 4. Self-Ignition Temperature: Provide photopolymer material that has a o o self-ignition temperature of 800 F (427 C) when tested in accordance with ASTM D 1929.
Submit under provisions of Section 01300.
Product Data: Manufacturer's data sheets on each product to be used including: 1. Preparation instructions and recommendations. 2. Storage and handling requirements and recommendations. 3. Installation methods.
Shop Drawings: Detail drawings showing sizes, lettering and graphics, construction details of each type of sign and mounting details with appropriate fasteners for specific project substrates. ** NOTE TO SPECIFIER ** Remove selection samples if colors already have been selected. D.
Selection Samples: For each finish product specified, two sets of color sheets representing manufacturer's full range of available colors and patterns.
Verification Samples: For each sign type and color specified, two samples, minimum size 6 in (150 mm) square, representing actual product, color and patterns.
Manufacturer's Installation Instructions: Printed installation instructions for each
signage system. G. 1.6
DELIVERY, STORAGE AND HANDLING A.
Deliver materials in unopened factory packaging.
Inspect materials at delivery to verify there are no defects or damage.
Store products in manufacturer's original packaging until ready for installation in climate controlled location away from direct sunlight.
Store and dispose of solvent-based materials and materials used with solvent-based materials in accordance with requirements of local authorities having jurisdiction.
PROJECT CONDITIONS A.
Install products in an interior climate controlled environment.
Maintain environmental conditions (temperature, humidity and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's absolute limits.
PART 2 2.1
Message List: Signage report indicating signage location, text and sign type.
At project closeout, provide to the Owner or Ownerâ€™s representative a copy of the manufacturer's standard limited warranty against manufacturing defect outlining the terms, conditions and exclusions from coverage. 1. Duration: One (1) year. PRODUCTS
Acceptable Manufacturer: Acorn Sign Graphics, 4109 West Clay Street, PO Box 11664, Richmond VA 23230-3307; Toll Free Tel: 800-770-4744; Tel: 804-726-6999; e-mail: email@example.com; website: www.acornsign.com
Substitutions: Not permitted unless bidder obtains approval from the Architect and/or Owner to bid alternates or substitutions to the specifications at least four weeks prior to bid date.
Provide all signage from one manufacturer.
2.2 SIGNAGE â€“ GENERAL ** NOTE TO SPECIFIER ** Remove products from list below that are not required. The signage in this specification is manufactured using the photopolymer process. The specific photopolymer used in the manufacture of signage from Acorn Sign Graphics is manufactured by Nova Polymers and incorporates the use of the Novacryl PT Series product line. Novacryl PT is photopolymer integrally bonded to PETG, which has a minimum of 40 percent post-industrial waste content. All materials must have a topcoat of acrylic polyurethane to ensure protection from cleaning agents, UV and moisture. Novacryl PT is fire rated for use in applications where fire hazard classification is required. A.
It is the intent of these specifications to establish a sign standard for the Owner including but not limited to primary and secondary directories, wall-mounted directional signs, primary room identification, restrooms, conference rooms, work
station identification and all code compliant signage. While the Owner many not obtain all signs and sign types, the signage contractor shall design and submit approval drawings for all sign types relevant to the project. B.
Comply with all applicable provisions of the 2010 ADA Standards for Accessible Design that apply to the State and Local jurisdiction of the project.
If required text and graphics are not indicated in specification or on drawings, obtain Owner's instructions as to text and graphics prior to preparation of shop drawings.
Typography: See Drawings. Copy shall be a clean and accurate reproduction of typeface(s) specified. Upper and lower case and all caps as indicated in Sign Type drawings and Signage Schedule. Letter spacing to be set by manufacturer.
Arrows, symbols and pictograms will be provided in style, sizes, colors and spacing as indicated in drawings for each sign system. ** NOTE TO SPECIFIER ** Remove all but one of the following. F.
Braille 1. Grade 2 Braille 2. California Braille
G. Design ** NOTE TO SPECIFIER ** Remove all but one of the following four placements. If more than one is required, indicate where each will be applied. 1. Text/Graphics Placement: Right justified. 2. Text/Graphics Placement: Centered. 3. Text/Graphics Placement: Left justified. 4. Text/Graphics Placement: As indicated on contract drawings. ** NOTE TO SPECIFIER ** Remove all but one of the following 11 font options. If more than one is required, indicate clearly where each will be applied. 5. Font: As indicated on the Contract Drawings. 6. Font: Arial. 7. Font: Avenir. 8. Font: Charlotte Sans Book. 9. Font: Futura. 10. Font: Gill Sans. 11. Font: Helvetica Regular. 12. Font: Helvetica Bold. 13. Font: Optima. 14. Font: Stone Sans Serif. 15. Font: Univers Condensed. 16. Font: ________________ 2.3
A. System: ASG: Bellevue. ** NOTE TO SPECIFIER ** Make one selection for ADA Plate Color from sections B, C, D, E, F. Remove what is not needed. B.
Insert Background Color Selection 1. Clear 2. White 3. Linen 4. Light Gray 5. Color: _______________
ADA Plate Color Selection – Basic Colors 1. Black 2. White 3. Color: ________________
ADA Plate Color Selection - Millennium Colors 1. Midnight Blue 2. Mosaic Blue 3. Lt. Mosaic Blue 4. Beach Glass 5. Starry Night 6. Spanish Olive 7. Almond 8. Granny Smith 9. Sweet Pea 10. Moss Side 11. Cardigan 12. Butternut 13. Moroccan Red 14. Fired Clay 15. Cafe Latte 16. Dreamsicle 17. Caramel 18. Silver Lining 19. Eucalyptus 20. Spruce 21. Color: ________________
ADA Plate Color Selection – Classic Colors 1. Beige 2. Light Gray 3. Dark Gray 4. Dark Brown 5. Deep Navy 6. Dark Green 7. Burgundy 8. Color: ________________
ADA Plate Color Selection - Legacy Colors 1. Rosedale 2. Cabernet Blend 3. Port Harbor 4. Royal Province 5. Pale Gray 6. Storm Gray 7. Skylight 8. Deep Sea 9. West Shore 10. Muted Teal 11. Hunter Hamlet 12. Shaded Grove 13. Antique White 14. Serene Blue 15. Stately Manor 16. Ocean Inlet 17. Radiant Light
18. Terra Cotta 19. Burgundy Bay 20. Rich Wine 21. Neutral Beige 22. Sand Storm 23. Calm Mist 24. Classic Sienna 25. Color: ________________ ** NOTE TO SPECIFIER ** Select the required upper and lower accent colors in this section. Remove what is not needed. G.
Accent Color Selection – Basic Colors 1. Black 2. White 3. Color: ________________
Accent Color Selection – Classic Colors 1. Beige 2. Light Gray 3. Dark Gray 4. Dark Brown 5. Deep Navy 6. Dark Green 7. Burgundy 8. Color: ________________
Accent Color Selection - Millennium Colors 1. Midnight Blue 2. Mosaic Blue 3. Lt. Mosaic Blue 4. Beach Glass 5. Starry Night 6. Spanish Olive 7. Almond 8. Granny Smith 9. Sweet Pea 10. Moss Side 11. Cardigan 12. Butternut 13. Moroccan Red 14. Fired Clay 15. Cafe Latte 16. Dreamsicle 17. Caramel 18. Silver Lining 19. Eucalyptus 20. Spruce 21. Color: ________________
Accent Color Selection - Legacy Colors 1. Rosedale 2. Cabernet Blend 3. Port Harbor 4. Royal Province 5. Pale Gray 6. Storm Gray
7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25.
Skylight Deep Sea West Shore Muted Teal Hunter Hamlet Shaded Grove Antique White Serene Blue Stately Manor Ocean Inlet Radiant Light Terra Cotta Burgundy Bay Rich Wine Neutral Beige Sand Storm Calm Mist Classic Sienna Color: ________________
Accent Color Selection – Textured Laminate 1. Light Mesh 2. Sable Stone 3. Pearl Stone 4. Natural Fiber 5. Gray Fiber 6. Color: ________________
Accent Color Selection – Metal Laminates 1. Brushed Aluminum 2. Satin Aluminum 3. Brushed Gold 4. Satin Gold 5. Corrugated Matte Aluminum 6. Color: ________________
Accent Color Selection – Wood Laminates 1. Shaker 2. Mahogany 3. Cherry 4. Brazilwood 5. Echo 6. Bamboo 7. Color: ________________
Lower Accent Color Selection – Basic Colors 1. Black 2. White 3. Color: ________________
Lower Accent Color Selection – Metal Laminates 1. Brushed Aluminum 2. Brushed Gold 3. Color: ________________
Lower Accent Color Selection – Classic Colors 1. Beige
2. Light Gray 3. Dark Gray 4. Dark Brown 5. Deep Navy 6. Dark Green 7. Burgundy 8. Color: ________________ ** NOTE TO SPECIFIER ** Make one selection for insert copy and one selection for raised copy in the following section. Remove what is not needed. Q.
Insert Copy Color Selection 1. Black 2. Dark Gray 3. Color: ________________
Insert Copy Font Selection 1. Font: As indicated on the Contract Drawings. 2. Font: Arial. 3. Font: Avenir. 4. Font: Charlotte Sans Book. 5. Font: Futura. 6. Font: Gill Sans. 7. Font: Helvetica Regular. 8. Font: Helvetica Bold. 9. Font: Optima. 10. Font: Stone Sans Serif. 11. Font: Univers Condensed. 12. Font: Bembo. 13. Font: Garamond. 14. Font: Stone Serif. 15. Font: Times New Roman. 16. Font: ________________
Raised Copy Color Selection 1. Black 2. White 3. Beige 4. Light Gray 5. Dark Gray 6. Dark Brown 7. Deep Navy 8. Dark Green 9. Burgundy 10. Color: ________________
Raised Copy Font Selection 1. Font: As indicated on the Contract Drawings. 2. Font: Arial. 3. Font: Avenir. 4. Font: Charlotte Sans Book. 5. Font: Futura. 6. Font: Gill Sans. 7. Font: Helvetica Regular. 8. Font: Helvetica Bold. 9. Font: Optima. 10. Font: Stone Sans Serif.
11. Font: Univers Condensed. 12. Font: ________________ ** NOTE TO SPECIFIER ** Select the required sizes and quantities in this section. Remove what is not needed. U.
Sign Type: 1. S1 ADA Sign (Room Number) a. Size: 4” x 5.75” b. Qty: _________ 2.
S2 ADA Sign (Room Number with Changeable Name Insert) a. Size: 6” x 5.75” b. Qty: _________
S3 Informational Sign (Cubicle ID with Changeable Name Insert) a. Size: 4.25” x 5.75” b. Qty: _________
S4 ADA Sign (Room Name) a. Size: 5” x 8” b. Qty: _________
S5 ADA Sign (Room Number with Changeable Name Insert) a. Size: 8.5 x 8” b. Qty: _________
S6 ADA Sign (Restroom) a. Size: 9” x 6” b. Qty: _________
S6.1 ADA Sign (Stairs) a. Size: 9” x 6” b. Qty: _________
S7 Information Sign (Elevator Lobby) a. Size: 8” x 6” b. Qty: _________
S8 Informational Sign (Maximum Occupancy) a. Size: 4.5” x 6” b. Qty: _________
S9 Informational Sign (Directional) a. Size: 6.5” x 12” b. Qty: _________
S10 Informational Sign (Fire Evacuation) a. Size: 13” x 12” b. Qty: _________
S11 ADA / Informational Sign (Stairwell) a. Size: 11.5” x 6” b. Qty: _________
S11.1 ADA / Informational Sign (Stairwell) a. Size: 10.75” x 6” b. Qty: _________
S12 Informational Sign (Directory) a. Size: 26â€? x 16â€? b. Qty: _________
V. Mounting ** NOTE TO SPECIFIER ** Remove all but one of the following. 1. Double face tape and silicone mount. 2. Mechanically fasten via manufacturer standard wall anchors and screws. O.
EXECUTION 1. EXAMINATION a. Verify that wall surface is dry and free from dirt, grease and loose paint. b. Complete all finishing operations, including painting, before beginning installation of signage systems. c. Do not begin installation until substrates have been properly prepared. d. If substrate preparation is the responsibility of another installer, notify Architect of unsatisfactory preparation before proceeding. e. Examine signage for defects prior to installation. Do not install damaged signage. 2.
PREPARATION a. Verify mounting heights and locations comply with referenced standards. b. Clean surfaces thoroughly prior to installation to remove dust, debris and loose particles. c. Prepare surfaces using the methods recommended by the manufacturer for achieving the best results for the substrate under the project conditions.
INSTALLATION a. Locate the signage system as indicated on drawings for the appropriate substrate and in accordance with manufacturer's installation instructions. b. Install signage systems level and plumb at the height indicated on the drawings. c. Mount in accordance with current ADA and state regulations.
CLEANING a. At completion of installation, clean surfaces in accordance with manufacturer's instructions.
PROTECTION a. Protect installed products until completion of project. b. Touch up, repair or replace damaged products before substantial completion. END OF SECTION