Page 1


ZEEKO R & D headquarter is proud to announce the release of the latest ‘Alloy Series’ hydrofoils : The White & Green hydrofoil. After winning all the magazine tests in 2015 and 2016, the new version is now available in your local store. WHAT’S NEW in 2017? - An increased finishing - An improved hydrodynamically fuselage - A quicker board/plate connexion - A full range of optionnal wings covering all types of practice Supplied hydrofoil wallet

PERFORMANCE: The White & Green hydrofoil is a very easy and efficient hydrofoil. It has a very high stability and enables progress serenely while having a very good speed potential (beyond 30kt). EASYNESS & FREERIDE / Ideal for beginners Below are the advantages of using aluminum hydrofoil instead of a carbon hydrofoil to learn how to hydrofoil: - The mast has various length (40cm, 70cm, 90cm or 96cm). You can learn with a 70cm long mast (ideal for first trials) and switch to a 90cm long mast (ideal for freeride). The balance will be easier to control than a long mast 1m. - The yaw effect is more controllable: you get more control (to illustrate the yaw effect, look at the hydrofoil on its top and imagine that the rear wing swing from right to left, with the front wing as fixed point). - The speed is more controllable. - The price is among the lowest in the market without losing quality.

yaw effect

ZEEKO ALLOY SERIES: A heavy-duty foil. Mast, plate and fuselage

Fuselage, mast and plate made of a specific alloy anodized and painted

All our Alloy series hydrofoils are manufactured with a special aluminum alloy (most of the hydrofoil are made of 6061, this is not our case), our alloy increase the rigidity of the hydrofoils but also offer an unmatched protection against corrosion . Also when most hydrofoils are only anodized, our foils are anodized and painted with paint reducing drag and increasing the performance. Front wing, back wing The front wings and the rear wing have been designed and developed for maximum comfort and stability. The wings are made of pre-preg fiberglass with a modern method for molding allowing an unprecedented rigidity and an unmatched assembling precision. The front wing is designed with a anhedral shape for a better control during turns and for a better control of the yaw effect. Vertical back fin

Anhedral front wing

This vertical fin is switchable (standard height: 2.5cm), it offers great stability especially in the yaw axis (ideal for beginners), it can be changed by a higher fin (4.0cm) to further reduce yaw effect. All twintip fins are compatible. SALT WATER & Alloy products The aluminum parts are anodized and painted, offering double protection against corrosion. The aluminum used is the most resistant to salt water. It is recommended to use the T-Gel for the screws (supplied with your alloy hydrofoil).

2.5cm vertical fin

New plate, quicker board/plate connexion The new White & Green hydrofoil plate was designed to facilitate the connection to the board. No need to unscrew fully the 4 screws, just loose 1/4 turn both front screws and unscrew the 2 rear screws and the hydrofoil is removed. The plate is compatible with all boards on the market, two distances are available: 165X90mm or 160X85mm Quick assembling plate

more hydrodynamical fuselage The fuselages are produced using a 5 axis machine allowing to remove holes on top of the fuselage made to connect the front wing. This results in a decrease in drag of the hydrofoil.

A full range of wings available (option)

Freeride front wing

The white & Green hydrofoil is supplied with the freeride front wing. You can also be equipped with an optional Carver wing ideal for turns and tacks or with a speed wing allowing you to achieve your best runs. All our compatible wings are made of fiberglass and not of carbon to avoid electrolysis problems between the two fabrics.

Equipement de sĂŠrie et options disponibles

Quick board/plate connexion. Plate anodized and painted French R&D

European Production

Mast with an optimized profile. Lenght: 40cm, 70cm, 90cm, 96cm anodized and painted

Super stable back wing profile

2.5cm vertical fin (4.0cm in option)

Freeride front wing

hydrodynamical alloy fuselage, anodized and painted

Ne pas dĂŠmonter Do not disassemble


AIR RACE 150cm X 46cm The high performance hydrofoil board

POCKET AIR 150cm X 46cm Easyness and Learning

MINI POCKET 108cm X 46cm Extrem strapless board

AIR WAVE 5’2 160cm X 47cm Strapless surfboard