DIN/ISO load chart YB4409XL 3-SECTION BOOM OR 4-SECTION BOOM WITH 4TH RETRACTED
4-SECTION BOOM WITH 4TH EXTENDED
JIB STRUCTURAL CAPACITIES (kg) MAIN BOOM 3-SECTION BOOM OR ON OUTRIGGERS (kg) ON RUBBER (kg) ON OUTRIGGERS (kg) ON RUBBER (kg) 4-SECTION BOOM 4-SECTION BOOM ANGLE WITH 4TH EXTENDED F/R 360° F/R 360° F/R 360° F/R 360° (deg) WITH 4TH RETRACTED 3-SECTION BOOM OR 60 1590 JIB STRUCTURAL CAPACITIES 1540 1,5 7710 7710 1,5 4535 4535 4-SECTION BOOM- WITH 4TH EXTENDED (kg) 4-SECTION BOOM WITH 4TH RETRACTED 1,8 7120 6530 1,8 55 1405 4310 3720 MAIN 1510 RADIUS RADIUS 50 1430 1295 2,4 (m) 5625ON OUTRIGGERS 4900 2,4 2225 2225 2225 2490 3580 2225 BOOM 3-SECTION BOOM OR (kg) ON RUBBER (kg) ON OUTRIGGERS (kg) ON RUBBER (kg) (m) 4-SECTION BOOM 4-SECTION BOOM ANGLE 1360 45 1180 3,0 4625 3855 3,0 1950 1950 1950 1670 2400 1880 WITH 4TH EXTENDED ° F/R 1170 360° F/R1450 360° 40 WITH 4TH RETRACTED 1100 F/R 1725 360° 1725 (deg) 1305 3,7 3855 F/R 3150 360 1670 3,7 1725 1270 1045 4,3 4,3 1,5 3220 7710 2550 7710 1200 4535 830 1,51540 - 1540 60 1590 1540 4535 - 1540 - 1130 - 35 1225 1000 4,9 4,9 1,8 2720 7120 1930 6530 930 4310 610 1,81405 - 1405 3720 - 1270 55 1510 1405 - 900 - 30 5,5 5,5 1180 975 2,4 2360 5625 1570 4900 770 3580 470 2,41315 2225 1315 50 1430 1295 22251040 2225 720 2490 2225 25 6,1 6,1 1135 965 3,0 1850 4625 1290 3855 630 2400 380 3,01315 1950 1315 45 1360 1180 1950 830 1950560 1670 1880 20 15 1090 955 6,7 1570 1100 6,7 1315 310 1315 540 680 430 3,7 3855 3150 3,7 1725 40 1305 1100 1725 1725 1170 1670 1450 7,3 1360 950 7,3 10 1055 930 1080 240 1315 450 560 340 4,3 3220 2550 4,3 1540 35 1270 1045 1540 1540 830 1200 1130 7,9 7,9 1020 920 4,9 1180 2720 820 1930 370 4,91315 30 1225 1000 1405 450 610 1405 930 930 190 1270 270 900 5 1000 905 8,2 8,2 5,5 1120 2360 770 1570 340 5,51200 1315 400 25 1180 975 470 1315 860 770 170 1040240 720 0 8,5 8,5 6,1 1070 1850 730 1290 310 6,11120 1315 370 20 1135 965 380 1315 800 630 140 830 220 560 970 9,1 650 9,1 990 110 710 280 310 180 6,7 1570 1100 6,7 15 1090 955 1315 310 1315 540 680 430 9,8 9,8 7,3 880 1360 580 950 240 7,3890 1080 270 10 1055 930 240 1315 630 450 90 560 130 340 10,2 7,9 800 1180 530 10,2 820 220 7,9790 930 230 5 1020 920 190 1315 540 370 60 450 100 270 11,0 11,0 8,2 1120 770 8,2700 0 1000 905 860 200 170 1200 480 340 400 60 240 11,6 11,6 650 440 40 180 8,5 1070 730 8,5 800 140 1120 310 370 220 12,2 12,2 610 410 20 150 970 9,1 650 9,1 990 110 710 280 310 180 12,8 12,8 570 370 10 130 880 9,8 580 9,8 90 890 240 630 130 270 13,1 540 350 120 0 13,1 10,2 530 10,2 60 800 220 540 100 790 230 11,0 11,0 700 480 60 200 11,6 11,6 650 40 180 NOTES: 1) The rated loads 440 are the maximum 4) Ratings on outriggers are with 12,2 12,2 610 410 20 150 JIB CAPACITY IS- LIMITED-BY BOTH -STRUCTURAL lifting capacities as outriggers fully extended. 12,8 12,8 570 370determined 10 130 CAPACITY CHART AND MAIN CAPACITY CHART. by radius 13,1 operating 540 350only. Any 120 0 13,1 RADIUS (m)
JIB
JIB
MAIN BOOM
MAIN BOOM
RADIUS (m)
SHADED AREAS ARE GOVERNED BY STRUCTURAL STRENGTH, DO NOT RELY ON TIPPING. OPERATION OF THIS EQUIPMENT IN EXCESS OF RATING CHARTS AND DISREGARD OF INSTRUCTIONS IS DANGEROUS AND VOIDS SIDE WARRANTY. 15°
15°
30°
30°
FRONT
REAR SIDE
15°
SIDE 15°
REDUCTION CHART
30°
FRONT
FROM MAIN BOOM RATINGS
MAIN BLOCK
64 kg
HOOK & BALL
FROM REAR JIB RATINGS
SIDE
N/A
45 kg 45 kg REDUCTION CHART
FROM 0 kgMAIN BOOM RATINGS
JIB, STOWED JIB, DEPLOYED MAIN BLOCK
68 kg
N/A
FROM JIB RATINGS
0 kg
64 kg
RIGGING CHART HOOK & BALL 45 kg
JIB, STOWED 1-PART 0-3855 kg JIB, DEPLOYED
0 kg 68 kg
N/A 45 kg
2-PART 0-7710 kg
N/A 0 kg
WIRE ROPE: 13 mm diameter
RIGGING139,8 CHART Min. breaking strength kN
1-PART 0-3855 kg
2-PART 0-7710 kg
WIRE ROPE: 13 mm diameter
30°
combination of boom lengths and angles may be used to obtain operating radius. The operating radius is the horizontal distance from a projection of the axis of rotation to the supporting surface, before loading, to the center of vertical hoist line or tackle with load applied. 2) The rated loads shown on outriggers do not exceed 80% of actual tipping. The rated loads shown on rubber do not exceed 75% of actual tipping. These ratings are based on freely suspended loads with the crane leveled, standing on a firm, uniform, supporting surface. Practical working loads depend on supporting surface, operating radius, and other factors affecting stability. Hazardous surroundings, climatic conditions, experience of operator, and proper training must all be taken into account by the operator.
5) Ratings on rubber depend on tire capacity, condition of tires and proper inflation pressure (6,9 bar). Loads on rubber may be transported at a maximum speed of 4 km/h on a smooth, hard, level surface with boom retracted to the shortest length possible and centered over front.
6) For operating radius not shown, use load rating of next larger radius. 7) The maximum combined total boom and deck load is 5443 kg. The maximum deck load only is 6350 kg. 8) Do not induce any external side loads to boom or jib.
3) The weights of all load handling devices such as hooks, hook blocks, slings, etc., except the hoist rope, shall be considered as part of the load. See reduction chart.
Min. breaking strength 139,8 kN
28
THIS CHART IS ONLY A GUIDE AND SHOULD NOT BE USED TO OPERATE THE CRANE. The individual crane’s load chart, operating instructions and other instructional plates must be read and understood prior to operating the crane.
1302119YB