__MAIN_TEXT__
feature-image

Page 1

SUBMITTAL JOB:

REPRESENTATIVE:

UNIT TAG:

ORDER NO.

DATE:

ENGINEER:

SUBMITTED BY:

DATE:

CONTRACTOR:

APPROVED BY:

DATE:

NRF - System Lubricated Iron Body Circulators DESCRIPTION

CONSTRUCTION MATERIALS

A flanged in-line system lubricated circulating pump designed specifically for quiet operation in a closed hydronic heating system.

Pump Body: Cast Iron Impeller: Noryl Shaft: Ceramic Bearings: Carbon

OPERATING DATA Maximum Working Pressure: 150 psi (10.3Bar) Minimum Operating Temperature: 40°F (5°C) Maximum Operating Temperature NRF-22 & NRF-9F/LW: 240°F (115°C) NRF-25, NRF-33, NRF-36 & NRF-45: 225°F (107°C) SCHEDULE

*

STANDARD 60 CYCLE SINGLE PHASE MOTOR CHARACTERISTICS F.L. WATTS VOLTAGE AMPS RPM 41 115 .40 2800

MODEL NUMBER NRF-9F/LW

PART NUMBER 103267

NRF-22

103251

92

115

.80

2940

NRF-25 *

103417

125

115

1.1

2950

NRF-33

103350

125

115

1.1

2950

NRF-36 *

103400

270

115

2.1

3300

NRF-45 *

103404

270

115

2.1

3300

Three-speed pump

TAGGING INFORMATION

QUANTITY

Distribuidor: (55) 5370-9692 5305-9179 5378-7190 6731-0616 http://circuladoresbyg.com

A-126H


System Lubricated Iron Body Circulators Model NRF

A-126H

*

C is center-to-center dimension of bolt holes. Flange orientation varies.

TYPICAL SPECIFICATIONS The contractor shall furnish and install in-line circulating pumps as illustrated on the plans and in accordance with the following specifications: 1. The pumps shall be of the horizontal, system lubricated type specifically designed and guaranteed for quiet operation. 2. Pumps to be suitable for _____°F (_____°C) [Select one: 240°F (115°C) for NRF-22 and NRF-9F/LW; 225°F (107°C) for NRF-25, NRF-33, NRF-36 and NRF-45] operation at 150 psig (10.3 Bar) working pressure. 3. The pumps shall have a ceramic shaft supported by carbon bearings. Bearings are to be lubricated by the circulating fluid. 4. Motor stator to be isolated from circulating fluid through use of stainless steel can. Rotor to be sheathed in stainless steel. 5. Motors shall be non-overloading at any point on the pump curve. (Select one: NRF-9F/LW, NRF-22, NRF-25, NRF-33) motors to have built-in impedance protection. (Select one: NRF-36, NRF-45) motors to have built-in thermal protection. 6. [Select one: NRF-25, NRF-36 or NRF-45] is available with 3-speed, thermally protected motor covering a wide range of hydraulic capabilities. 7. The pump manufacturer shall be ISO-9001 certified. Pumps to have a capacity of __________ GPM at ________ foot head when powered by 115 volt, 60 cycle, single phase electrical supply. All pumps are to be Bell and Gossett Model NRF-__________.

MODEL

PART NUMBER

A in (mm)

B in (mm)

C in (mm)

D in (mm)

E in (mm)

F in (mm)

G in (mm)

Weight (lb)

NRF-9F/LW

103267

5-1/8 (130)

3-3/16 (81)

3-3/16 (81)

6-3/16 (157)

4-5/16 (110)

6-3/8 (162)

3-3/16 (81)

9.3

NRF-22

103251

5-1/8 (130)

3-3/16 (81)

3-3/16 (81)

6-3/16 (157)

4-5/16 (110)

6-3/8 (162)

3-3/16 (81)

9.3

NRF-25 *

103417

5-1/8 (130)

3-3/16 (81)

3-3/16 (81)

6-3/16 (157)

4-7/8 (124)

6-3/8 (162)

3-7/8 (98)

10.4

NRF-33

103350

5-1/8 (130)

3-3/16 (81)

3-3/16 (81)

6-3/16 (157)

3-11/16 (94)

6-3/8 (162)

3-3/16 (81)

10.4

NRF-36

103400

5-3/4 (146)

3-9/16 (91)

3-3/16 (81)

6-7/8 (175)

5-3/8 (137)

6-3/8 (162)

3-3/16 (81)

13.1

NRF-45 *

103404

5-3/4 (146)

3-9/16 (91)

3-7/16 (87)

7-3/8 (187)

5-1/2 (140)

8-1/2 (216)

4-1/4 (108)

14.5

Dimensions are subject to change. Not to be used for construction purposes unless certified.

Companion Flanges Available in Sizes: 3/4", 1", 1-1/4" and 1-1/2" Xylem Inc. 8200 N. Austin Avenue Morton Grove, IL 60053 Phone: (847)966-3700 Fax: (847)965-8379 www.bellgossett.com Bell & Gossett is a trademark of Xylem Inc. or one of its subsidiaries. © 2013 Xylem Inc.

Distribuidor: (55) 5370-9692 5305-9179 5378-7190 6731-0616 http://circuladoresbyg.com

PUMP PERFORMANCE CURVE


Distribuidor: (55) 5370-9692 5305-9179 5378-7190 6731-0616 http://circuladoresbyg.com

SUBMITTAL A-123B

JOB:

REPRESENTATIVE:

UNIT TAG: ENGINEER:

ORDER NO. SUBMITTED BY:

DATE: DATE:

CONTRACTOR:

APPROVED BY:

DATE:

Series LR Iron & Lead-Free† Bronze Booster Pumps Where potable water is pumped, use a lead-free† bronze Series LR circulator.

DESCRIPTION The Series LR is a flanged in-line system lubricated circulating pump designed specifically for quiet operation in closed loop systems. The Series LR is available in cast iron body construction for hydronic heating systems or lead-free † bronze body construction for potable water applications.

CONSTRUCTION Pump Body LR-20WR: Cast Iron LR-15BWR:Lead-Free† Bronze Impeller: Noryl® Shaft: Ceramic Bearings: Carbon †

Contains less than 0.25% Lead content by weight on wetted surfaces.

OPERATING DATA Maximum working pressure: 150 psig (10 bar) Maximum operating temperature: 225°F (107°C)

Standard 60 Cycle Motor Characteristics

Part Number

Pump Body Material

Flange Sizes Inches-NPT

Watts

Voltage

F.L. Amps

RPM

LR-20WR

106507

Cast Iron

3/4, 1, 1-1/4, 1-1/2

125

115

1.1

2950

LR-15BWR

106514LF

3/4, 1, 1-1/4, 1-1/2

125

115

1.1

2950

Model Number

Lead-Free†

Bronze

Tagging

Quantity


A-123B

PUMP PERFORMANCE CURVE

TYPICAL SPECIFICATIONS The contractor shall furnish and install in-line circulating pumps as illustrated on the plans and in accordance with the following specifications: 1. The pump shall be of the horizontal system lubricated type specifically designed and guaranteed for quiet operation. 2. Pump to be suitable for 225º F (107º C) operation at 150 PSIG (10 Bar) working pressure. 3. The pumps shall have a ceramic shaft supported by carbon bearings. Bearings are to be lubricated by the circulating fluid.

Xylem Inc. 8200 N. Austin Avenue Morton Grove, IL 60053 Phone: (847)966-3700 Fax: (847)965-8379 www.xyleminc.com/brands/bellgossett Bell & Gossett is a trademark of Xylem Inc. or one of its subsidiaries. © 2012 Xylem Inc.

4. Motor stator to be isolated from circulating fluid through use of stainless steel can. Rotor to be sheathed in stainless steel. 5. Motors shall be non-overloading at any point on the pump curve. Motors to have built-in impedance protection. 6. The pump manufacturer shall be ISO-9001 certified. Pumps to have a capacity of __________ GPM at ________ foot head when powered by 115 volt, 60 cycle, single phase electrical supply. All pumps are to, ITT Industries−Bell & Gossett Model LR___________.

Distribuidor: (55) 5370-9692 5305-9179 5378-7190 6731-0616 http://circuladoresbyg.com

Series LR System Lubricated Circulators


Distribuidor: (55) 5370-9692 5305-9179 5378-7190 6731-0616 http://circuladoresbyg.com

SUBMITTAL A-135G

JOB:

REPRESENTATIVE:

UNIT TAG:

ORDER NO.

DATE:

ENGINEER:

SUBMITTED BY:

DATE:

CONTRACTOR:

APPROVED BY:

DATE:

Permanently Lubricated Iron & Lead-Free† Bronze Booster Pumps DESCRIPTION

CONSTRUCTION MATERIALS

The Series PL™ close coupled booster pumps are specifically designed for quiet operation in hydronic, radiant and geothermal heating and cooling systems. These inline permanently lubricated pumps are available in cast iron or lead-free† bronze body construction.

Booster Body: Cast Iron or Lead-Free† Bronze Face Plate: Stainless Steel Impeller: 30% Glass Filled Noryl® (PL-55 & PL-130): Glass Filled PPS Shaft: Carbon Steel (PL-55 & PL-130): Stainless Steel Shaft Sleeve: Stainless Steel (PL-55 & PL-130): None Seal: Mechanical, Carbon on Silicon Carbide Motor Bearings: Sealed Precision Steel Ball Bearing Permanently Lubricated Motor Type: ODP Elastomers: EPDM

OPERATING DATA Maximum working Pressure: 150 psi (10 Bar) Maximum Operating Temperature: 225°F (107°C) †

Contains less than 0.25% Lead content by weight on wetted surfaces.

SCHEDULE CAST IRON MODEL NUMBER PL-30 PL-30 PL-36 PL-36 PL-36 PL-45 PL-45 PL-45 PL-50 PL-50 PL-50 PL-55 PL-55 PL-55 PL-75 PL-75 PL-75 PL-130/2" PL-130/2" PL-130/2" PL-130/3" PL-130/3" PL-130/3"

PART NUMBER 1BL012 1BL014 1BL001 1BL006 1BL116 1BL002 1BL007 1BL121 1BL016 1BL018 1BL123 1BL032 1BL033 1BL115 1BL034 1BL036 1BL125 1BL063 1BL064 1BL127 1BL070 1BL071 1BL130

QTY.

LEAD-FREE† BRONZE MODEL NUMBER PART NUMBER PL-30B 1BL013LF PL-30B 1BL015LF PL-36B 1BL003LF PL-36B 1BL008LF PL-36B 1BL118LF PL-45B 1BL004LF PL-45B 1BL009LF PL-45B 1BL122LF PL-50B 1BL017LF PL-50B 1BL019LF PL-50B 1BL124LF PL-55B 1BL068LF PL-55B 1BL069LF PL-55B 1BL119LF PL-75B 1BL035LF PL-75B 1BL037LF PL-75B 1BL126LF PL-130B/2" 1BL065LF PL-130B/2" 1BL066LF PL-130B/2" 1BL128LF PL-130B/3" 1BL072LF PL-130B/3" 1BL073LF PL-130B/3" 1BL131LF

QTY.

Note: Where potable water is pumped, use a lead-free † bronze booster. PL boosters equipped with a drip-proof motor are recommended for indoor use only.

STANDARD 60 CYCLE SINGLE PHASE MOTOR CHARACTERISTICS HP VOLTAGE F.L. AMPS RPM 1/12 115 1.4 2650 1/12 230 0.8 2650 1/6 115 2.1 3300 1/6 230 1.1 3300 1/6 277 1 3300 1/6 115 2.1 3300 1/6 230 1.1 3300 1/6 277 1 3300 1/6 115 1.8 3300 1/6 230 1.0 3300 1/6 277 1.0 3300 2/5 115 4.7 3250 2/5 230 2.4 3250 2/5 277 1.9 3250 1/6 115 2.1 3400 1/6 230 1.1 3400 1/6 277 1 3400 2/5 115 4.8 3200 2/5 230 2.4 3200 2/5 277 1.9 3200 2/5 115 4.8 3200 2/5 230 2.4 3200 2/5 277 1.9 3200

TAGGING INFORMATION


SERIES PL - Permanently Lubricated Booster Pumps

A-135G

DIMENSIONS AND WEIGHTS MODEL NO. PL-30 PL-36 PL-45 PL-50 PL-55 PL-75 PL-130/2" PL-130/3"

FLANGE SIZE INCHES NPT 3/4, 1, 1-1/4 & 1-1/2 3/4, 1, 1-1/4 & 1-1/2 1, 1-1/4 & 1-1/2 1, 1-1/4 & 1-1/2 3/4, 1, 1-1/4 & 1-1/2 2 2 3

MOTOR HP

A

B

C

D

E

APPROXIMATE SHIPPING WT. LBS. (KG)

1/12

8 5/8 (219)

6 3/8 (162)

7 1/8 (181)

4 3/16 (106)

4 3/8 (111)

11.6 (5.3)

1/6

8 5/8 (219)

6 3/8 (162)

7 1/8 (181)

4 3/16 (106)

4 3/8 (111)

13.1 (6.0)

1/6

9 1/8 (232)

8 1/2 (216)

7 1/4 (184)

4 5/8 (117)

4 1/2 (114)

14.5 (6.6)

1/6

9 1/8 (232)

8 1/2 (216)

7 1/4 (184)

4 5/8 (117)

4 1/2 (114)

14.5 (6.6)

2/5

9 9/16 (243)

6 3/8 (162)

7 15/16 (202)

4 3/16 (106)

4 3/4 (121)

13.1 (6.0)

1/6 2/5 2/5

9 15/16 (252) 10 3/4 (273) 10 3/4 (273)

8 1/2 (216) 8 1/2 (216) 8 1/2 (216)

7 3/8 (187) 8 1/4 (210) 8 1/4 (210)

5 3/16 (132) 5 3/16 (132) 6 (152)

4 5/8 (117) 5 1/8 (130) 5 1/8 (130)

18.5 (8.4) 22 (10) 27 (12.2)

DIMENSIONS - INCHES (mm)

Dimensions are approximate and subject to change. Contact factory for certified dimensions.

TYPICAL SPECIFICATIONS The contractor shall furnish and install inline pumps as illustrated on the plans and in accordance with the following specifications: 1. The pumps shall be of the horizontal, permanently lubricated type, specifically designed and guaranteed for quiet operation. 2. The pumps shall have a steel shaft supported by permanently lubricated, sealed precision ball bearings. The pumps are to be equipped with a water-tight seal to prevent leakage. Mechanical seal faces to be carbon on silicon carbide. The motor shall be non-overloading at any point on the pump performance curve. 3. The motor shall be of the drip-proof, sealed precision ballbearing, quiet-operating construction. The permanent splitcapacitor motor shall be equipped with thermal overload protection. 4. Pumps to be suitable for 225°F (107°C) operating temperature at 150 psig (10 bar) working pressure. The pumps shall be Bell & Gossett, A Xylem brand. Model No. PL-__________ with a capacity of __________ GPM at __________ feet of head.

Xylem Inc. 8200 N. Austin Avenue Morton Grove, IL 60053 Phone: (847)966-3700 Fax: (847)965-8379 www.bellgossett.com Bell & Gossett is a trademark of Xylem Inc. or one of its subsidiaries. © 2014 Xylem Inc.

Distribuidor: (55) 5370-9692 5305-9179 5378-7190 6731-0616 http://circuladoresbyg.com

PERFORMANCE CHARACTERISTICS CURVES


Distribuidor: (55) 5370-9692 5305-9179 5378-7190 6731-0616 http://circuladoresbyg.com

SUBMITTAL A-120H JOB:

REPRESENTATIVE:

UNIT TAG:

ORDER NO.

ENGINEER:

SUBMITTED BY:

CONTRACTOR:

DATE: DATE: DATE:

APPROVED BY:

Iron & Lead-Free† Bronze* Booster Pump *Where potable water is supplied, use a lead-free† bronze pump.

DESCRIPTION Bell & Gossett in-line three-piece booster pumps are designed for hydronic systems. Series 100 and HV are Listed with Underwriter's Laboratories. CONSTRUCTION

OPERATIONAL DATA Maximum Working Pressure: 125 PSI (682 kPa) Maximum Operating Temperature: - Standard Seal: 225°F (107°C) continuous - Special Seals: 250°F (121°C) continuous (consult local B&G Representative) Maximum Motor RPM: 1750

Body: Cast Iron or Lead-Free† Bronze Seal: Mechanical, Carbon on Ceramic Shaft: Carbon Steel, Heat Treated Pump and Motor Bearings: −All except PD-38 and PD-40: Bronze Sleeve, Oil Lubricated −PD-38 and PD-40: Ball Bearing, Permanently Lubricated Coupler: −All except PD38 and PD40: Flexible, Spring type −PD38 and PD40: Flexible, sleeve type. Motor: Bell & Gossett 1/12 hp thru 1-1/2 hp standard single and three phase dripproof motors are Recognized under the Component Program of Underwriter's Laboratories, Inc. Bell & Gossett boosters with their respective Bell & Gossett manufactured standard 60 hertz single and three phase motors are Certified by CSA.

IMPELLER: PUMP MODEL NO. Series 100® Pump Series HV & 2 PR, 2-1/2, LD3 HD3, PD35, PD37 PD38 & PD40

IRON BODY Polypropylene* or Lead-Free† Brass Phenolic* or Lead-Free† Brass Steel, Zinc Plated or Lead-Free† Brass Steel, Zinc Plated or Lead-Free† Brass Cast Iron or Lead-Free† Brass

BRONZE BODY Polypropylene* or Lead-Free† Brass Phenolic* or LeadFree† Brass Lead-Free† Brass Lead-Free† Brass Lead-Free† Brass

* System temperatures above 225 °F (107 °C) require a brass impeller. † Contains less than 0.25% Lead content by weight on wetted surfaces.

SCHEDULE **STANDARD 60 CYCLE CHARACTERISTICS FLANGE SIZE NPT INCHES HP PH VOLTAGE* F.L. AMPS RPM 3/4, 1, Series 100 1/12 1 115 1.75 1725 1-1/4 & 1-1/2 3/4, 1, Series PR 1/6 1 115 1.9 1725 1-1/4 & 1-1/2 1, 1-1/4 Series HV 1/6 1 115 1.9 1725 & 1-1/2 2 2 1/6 1 115 1.9 1725 2-1/2 2-1/2 1/4 1 115 3.0 1725 LD3 3 1/4 1 115 3.0 1725 HD3 3 1/3 1 115/230 4.2/2.1 1725 PD-35S 3 1/2 1 115/230 5.2/2.6 1725 PD-35T 3 1/2 3 208-230/460 1.8-1.7/.85 1750 PD-37S 3 3/4 1 115/230 7.0/3.5 1725 PD-37T 3 3/4 3 208-230/460 2.45-2.4/1.2 1750 PD-38S 3 1 1 115/230 9.8/4.5 1725 PD-38T 3 1 3 208-230/460 3.4-3.4/1.7 1725 PD-40S 3 1-1/2 1 115/230 18.0/9.0 1725 PD-40T 3 1-1/2 3 208-230/460 4.8-4.8/2.4 1725 **Motors with special electrical characteristics are available on request at additional cost. *1 PH Motors: Built-in overload protection 3 PH Motors: Overload protection must be provided Bell & Gossett Booster Pumps equipped with a drip-proof motor are recommended for indoor use only. MODEL NO.

TAGGING INFORMATION

QUANTITY Iron Body Bronze Body STD BI BI NFI

− − − − − − − − − − −


MODEL NO. Series 100 Series PR Series HV 2

FLANGE SIZE NPT INCHES 3/4, 1, 1-1/4 & 1-1/2 3/4, 1, 1-1/4 & 1-1/2 1, 1-1/4 & 1-1/2 2

2-1/2

2-1/2

LD3

3

HD3

3

PD-35S

3

PD-35T

3

PD-37S

3

PD-37T

3

PD-38S

3

PD-38T

3

PD-40S

3

PD-40T

3

DIMENSIONS IN INCHES (MM) A

B

C

14-7/8 (378) 15-1/4 (387) 15-3/8 (391) 16-5/8 (422) 17-1/4 (438) 17-1/4 (438) 17-1/2 (444) 20-1/4 (514) 20-1/4 (514) 20-1/4 (514) 20-1/4 (514) 22-11/16 (576) 23-15/16 (608) 24-3/4 (629) 21-7/8 (556)

6-3/8 (162) 8-1/2 (216) 8-1/2 (216) 8-1/2 (216) 10 (254) 10 (254) 10 (254) 12 (305) 12 (305) 12 (305) 12 (305) 14-1/2 (368) 14-1/2 (368) 14-1/2 (368) 14-1/2 (368)

12-3/4 (324) 12-3/4 (324) 13 (330) 14 (356) 14 (356) 14 (356) 14-1/4 (362) 16-7/8 (429) 16-7/8 (429) 16-7/8 (429) 16-7/8 (429) 18-15/16 (481) 20-3/16 (513) 21 (533) 18-1/8 (460)

Dimensions are subject to change. Not to be used for construction purposes unless certified.

Xylem Inc. 8200 N. Austin Avenue Morton Grove, IL 60053 Phone: (847)966-3700 Fax: (847)965-8379 www.xyleminc.com/brands/bellgossett Bell & Gossett is a trademark of Xylem Inc. or one of its subsidiaries. © 2012 Xylem Inc.

A-120H

APPROX. SHPG. WT. LBS. (Kg) IRON BRONZE BODY BODY 20 (9) 30 (14) 28 (13) 36 (16) 54 (24) 53 (24) 55 (25) 75 (34) 75 (34) 75 (34) 75 (34) 128 (58) 125 (57) 130 (59) 127 (58)

21 (10) 32 (15) 30 (14) 39 (18) 58 (26) 57 (26) 59 (27) 80 (36) 80 (36) 80 (36) 80 (36) 138 (63) 135 (61) 140 (64) 137 (62)

Electrical Box Arrangement for pumps with B&G Manufactured Motors MODEL NO. #1 #2 #3 #4 Series 100 Series HV, PR & 2 2-1/2", LD3 & HD3 PD35 & PD37 PD38 & PD40

115 & 230Volt 60Hz 1PH 110 & 220Volt 50Hz 1PH 115 & 230Volt 60Hz 1PH 110 & 220Volt 50Hz 1PH − − −

3PH

1PH − −

− ALL −

− − ALL

Distribuidor: (55) 5370-9692 5305-9179 5378-7190 6731-0616 http://circuladoresbyg.com

Iron & Bronze Booster Pump Submittal

TYPICAL SPECIFICATIONS The Contractor shall furnish and install In-The-Line pumps as illustrated on the plans and in accordance with the following specifications: 1. The pumps shall be of the horizontal, oil-lubricated type. (Except PD-38, PD40 are permanently lubricated) Specifically designed and guaranteed for quiet operation. Suitable for 125# (862 kPa) working pressure. 2.The pumps shall have a ground and polished steel shaft with a hardened integral thrust collar. The shaft shall be supported by two horizontal sleeve bearings designed to circulate oil. (Except PD-38, PD-40 are grease lubricated ball bearing design) The pumps are to be equipped with a mechanical seal with carbon seal face rotating against a ceramic seat. The motor shall be nonoverloading at any point on pump curve. 3. The motor shall be of the drip-proof, sleeve-bearing, (Except PD-38, PD-40 are ball bearing) quiet operating, rubber-mounted construction. Motors shall have built-in thermal overload protectors. (Exception - PD models with 3-phase motors, see paragraph 4.) 4. For PD models with 3-phase motors, add the following: The Contractor shall furnish and install a magnetic starter for each booster pump with at least two thermal overload protectors. The starter shall be equipped with manual reset buttons. All Units must be ITT Bell & Gossett Model No. ________, or approved equal with capacity of ______GPM at ______ft. head when directly driven through a self aligning flexible coupling by an oil lubricated motor, _____volts ____cycle___phase.


SUBMITTAL B-148A JOB:

REPRESENTATIVE:

UNIT TAG:

ORDER NO.

DATE:

ENGINEER:

SUBMITTED BY:

DATE:

CONTRACTOR:

APPROVED BY:

DATE:

Distribuidor: (55) 5370-9692 5305-9179 5378-7190 6731-0616 http://circuladoresbyg.com

Series 60 Stock Pumps Maintenance Free In-Line Mounted Pump SPECIFICATIONS FLOW HP

MATERIALS OF CONSTRUCTION/FEATURES HEAD RPM

VOLTS CYCLE

PHASE

© COPYRIGHT 2010 ITT Corporation

1750 RPM ODP MOTOR FACTORY TESTED THREE YEAR WARRANTY INTERNAL SELF-FLUSHING MECHANICAL SEAL 175 PSI (12bar) MAX.W.P XLii LUBRICATION SYSTEM BURA/CARBON-CERAMIC SEAL (-20°F TO 225°F) BRONZE FITTED OR ALL BRONZE CONSTRUCTION

Bell & Gossett


Series 60 Stock Centrifugal Pump Submittal

B-148A

MODEL

SUCTION AND DISCHARGE SIZE INCHES NPT

F

G

K

L

M

N

P

R

S

T

601,602 & 603

1

6-7/16 (164)

3-7/16 (87)

3-5/8 (92)

1-3/8 (35)

2-1/2 (64)

7-1/2 (190)

3/4 (19)

5 (127)

6 (152)

11 (279)

604,605 & 606

1-1/4

6-7/16 (164)

3-7/16 (87)

3-5/8 (92)

1-3/8 (35)

2-1/2 (64)

7-1/2 (190)

3/4 (19)

5 (127)

6 (152)

11 (279)

607,608 & 609

1-1/2

6-9/16 (167)

3-5/8 (92)

3-3/4 (95)

1-3/8 (35)

2-3/4 (70)

7-7/8 (200)

3/4 (19)

5 (127)

6-1/2 (165)

11-1/2 (292)

PUMP DIMENSION IN INCHES (MM)

613,614 & 621

1-1/2

6-11/16 (170)

3-3/8 (86)

4-1/16 (103)

1 (25)

3-9/16 (90)

8-9/16 (217)

3/4 (19)

6-1/2 (165)

7 (176)

13-1/2 (343)

617,618,622 & 623

1-1/2

9-3/8 (238)

3-1/4 (83)

4-5/8 (117)

1 (25)

3-7/8 (98)

9-1/2 (241)

3/4 (19)

6-1/2 (165)

7 (176)

13-1/2 (343)

610,611 & 612

2

6-11/16 (170)

3-3/4 (95)

3-3/4 (95)

1-3/8 (35)

2-7/8 (73)

8 (203)

13/16 (21)

5 (127)

6-1/2 (165)

11-1/2 (292)

615,616

2

6-15/16 (170)

3-1/2 (89)

4-3/8 (111)

1 (25)

4 (102)

9-3/8 (238)

13/16 (21)

6-1/2 (165)

7 (176)

13-1/2 (343)

619,620 &624

2

9-3/8 (238)

3-1/2 (89)

4-3/4 (121)

1 (25)

4-1/8 (105)

9-7/8 (251)

13/16 (21)

6-1/2 (165)

7-1/2 (165)

14 (356)

Maximium working pressure 175 PSI (12 Bar)

PART #

MODEL

PUMP SIZE

HP

IMP DIA

A

B

C

D

E

H

APP WEIGHT LBS

172701LF

601S

1x1x5-1/4

1/4

4.38"

10-1/8 (257)

2-1/4 (57)

7-7/8 (200)

4-3/8 (111)

10 (254)

19-7/8 (505)

48

172704LF

B601S

1x1x5-1/4

1/4

4.38"

10-1/8 (257)

2-1/4 (57)

7-7/8 (200)

4-3/8 (111)

10 (254)

19-7/8 (505)

48

172947LF

602S

1x1x5-1/4

1/3

4.84"

10-1/8 (257)

2-1/4 (57)

7-7/8 (200)

4-3/8 (111)

10 (254)

19-7/8 (505)

53

172705LF

B602S

1x1x5-1/4

1/3

4.84"

10-1/8 (527)

2-1/4 (57)

7-7/8 (200)

4-3/8 (111)

10 (254)

19-7/8 (505)

53

172703LF

603S

1x1x5-1/4

1/2

5.25"

10-1/8 (257)

2-1/4 (57)

7-7/8 (200)

4-3/8 (111)

10 (254)

21-1/8 (537)

55

172706LF

B603S

1x1x5-1/4

1/2

5.25"

10-1/8 (257)

2-1/4 (57)

7-7/8 (200)

4-3/8 (111)

10 (254)

21-1/8 (537)

55

172707LF

604S

1-1/4x1-1/4x5-1/4

1/4

4.38"

10-1/8 (257)

2-1/4 (57)

7-7/8 (200)

4-3/8 (111)

10 (254)

19-7/8 (505)

50

172709LF

B604S

1-1/4x1-1/4x5-1/4

1/4

4.38"

10-1/8 (257)

2-1/4 (57)

7-7/8 (200)

4-3/8 (111)

10 (254)

19-7/8 (505)

50

172708LF

605S

1-1/4x1-1/4x5-1/4

1/3

4.84"

10-1/8 (257)

2-1/4 (57)

7-7/8 (200)

4-3/8 (111)

10 (254)

19-7/8 (505)

55

172710LF

B605S

1-1/4x1-1/4x5-1/4

1/3

4.84"

10-1/8 (257)

2-1/4 (57)

7-7/8 (200)

4-3/8 (111)

10 (254)

19-7/8 (505)

55

172667LF

606S

1-1/4x1-1/4x5-1/4

1/2

5.25"

10-1/8 (257)

2-1/4 (57)

7-7/8 (200)

4-3/8 (111)

11 (279)

21-1/8 (537)

57

172711LF

B606S

1-1/4x1-1/4x5-1/4

1/2

5.25"

10-1/8 (257)

2-1/4 (57)

7-7/8 (200)

4-3/8 (111)

11 (279)

21-1/8 (537)

57

172712LF

607S

1-1/2x1-1/2x5-1/4

1/3

4.38"

10-1/8 (257)

2-1/4 (57)

7-7/8 (200)

4-3/8 (111)

10 (254)

20-3/16 (513)

59

172714LF

B607S

1-1/2x1-1/2x5-1/4

1/3

4.38"

10-1/8 (257)

2-1/4 (57)

7-7/8 (200)

4-3/8 (111)

10 (254)

20-3/16 (513)

59

172713LF

608S

1-1/2x1-1/2x5-1/4

1/2

4.94"

10-1/8 (257)

2-1/4 (57)

7-7/8 (200)

4-3/8 (111)

11 (279)

21-7/16 (545)

61

172715LF

B608S

1-1/2x1-1/2x5-1/4

1/2

4.94"

10-1/8 (257)

2-1/4 (57)

7-7/8 (200)

4-3/8 (111)

11 (279)

21-7/16 (545)

61

172668LF

609S

1-1/2x1-1/2x5-1/4

3/4

5.25"

10-1/8 (257)

2-1/4 (57)

7-7/8 (200)

4-3/8 (111)

11 (279)

21-7/16 (545)

63

172716LF

B609S

1-1/2x1-1/2x5-1/4

3/4

5.25"

10-1/8 (257)

2-1/4 (57)

7-7/8 (200)

4-3/8 (111)

11 (279)

21-7/16 (545)

63

172717LF

610S

2x2x5-1/4

1/2

4.12"

10-1/8 (257)

2-1/4 (57)

7-7/8 (200)

4-3/8 (111)

11 (279)

21-11/16 (551)

63

172719LF

B610S

2x2x5-1/4

1/2

4.12"

10-1/8 (257)

2-1/4 (57)

7-7/8 (200)

4-3/8 (111)

11 (279)

21-11/16 (551)

63

172718LF

611S

2x2x5-1/4

3/4

4.75"

10-1/8 (257)

2-1/4 (57)

7-7/8 (200)

4-3/8 (111)

11 (279)

21-11/16 (551)

71

172720LF

B611S

2x2x5-1/4

3/4

4.75"

10-1/8 (257)

2-1/4 (57)

7-7/8 (200)

4-3/8 (111)

11 (279)

21-11/16 (551)

71

172669LF

612S

2x2x5-1/4

1

5.25"

10-1/8 (257)

2-1/4 (57)

7-7/8 (200)

4-3/8 (111)

11 (279)

23-5/8 (600)

78

172721LF

B612S

2x2x5-1/4

1

5.25"

10-1/8 (257)

2-1/4 (57)

7-7/8 (200)

4-3/8 (111)

11 (279)

23-5/8 (600)

78

172948LF

626S

3x3x5-1/4

3/4

4.375"

10-1/8 (257)

2-1/4 (57)

7-7/8 (200)

4-3/8 (111)

11 (279)

20-7/16 (520)

77

172950LF

B626S

3x3x5-1/4

3/4

4.375"

10-1/8 (257)

2-1/4 (57)

7-7/8 (200)

4-3/8 (111)

11 (279)

20-7/16 (520)

77

172952LF

627S

3x3x5-1/4

1-1/2

5.25"

8-3/4 (222)

2-1/4 (57)

6-1/2 (165)

3-1/4 (83)

10-3/4 (273)

21-1/8 (536)

87

172954LF

B627S

3x3x5-1/4

1-1/2

5.25"

8-3/4 (222)

2-1/4 (57)

6-1/2 (165)

3-1/4 (83)

10-3/4 (273)

21-1/8 (536)

87

172755LF

621S

1-1/2x1-1/2x6-1/4

1/2

4.88"

10-1/8 (257)

2-1/4 (57)

7-7/8 (200)

4-3/8 (111)

11 (279)

21-5/6 (541)

66

172771LF

B621S

1-1/2x1-1/2x6-1/4

1/2

4.88"

10-1/8 (257)

2-1/4 (57)

7-7/8 (200)

4-3/8 (111)

11 (279)

21-5/6 (541)

66

172722LF

613S

1-1/2x1-1/2x6-1/4

3/4

5.75"

10-1/8 (257)

2-1/4 (57)

7-7/8 (200)

4-3/8 (111)

11 (279)

21-5/6 (541)

68

172670LF

614S

1-1/2x1-1/2x6-1/4

1

6.25"

10-1/8 (257)

2-1/4 (57)

7-7/8 (200)

4-3/8 (111)

9-3/4 (248)

21-7/16 (545)

85

172773LF

B614S

1-1/2x1-1/2x6-1/4

1

6.25"

10-1/8 (257)

2-1/4 (57)

7-7/8 (200)

4-3/8 (111)

9-3/4 (248)

21-7/16 (545)

85

172723LF

615S

2x2x6-1/4

3/4

5.62"

10-1/8 (257)

2-1/4 (57)

7-7/8 (200)

4-3/8 (111)

11 (279)

21-7/16 (545)

77

172775LF

B615S

2x2x6-1/4

3/4

5.62"

10-1/8 (257)

2-1/4 (57)

7-7/8 (200)

4-3/8 (111)

11 (279)

21-7/16 (545)

77

172671LF

616S

2x2x6-1/4

1

6.22"

10-1/8 (257)

2-1/4 (57)

7-7/8 (200)

4-3/4 (121)

9-3/4 (248)

21-7/16 (545)

86

172757LF

622S

1-1/2x1-1/2x7

3/4

5.50"

10-1/8 (257)

2-1/4 (57)

7-7/8 (200)

4-3/8 (111)

11 (279)

23-5/8 (600)

81

172758LF

623S

1-1/2x1-1/2x7

1

6.0"

10-1/8 (257)

2-1/4 (57)

7-7/8 (200)

4-3/8 (111)

11 (279)

23-5/8 (600)

90

172724LF

617S

1-1/2x1-1/2x7

1-1/2

6.5"

10-1/8 (257)

2-1/4 (57)

7-7/8 (200)

4-3/8 (111)

11 (279)

23-5/8 (600)

102

172761LF

624S

2x2x7

1

5.69"

10-1/8 (257)

2-1/4 (57)

7-7/8 (200)

4-3/4 (121)

11 (279)

23-5/8 (600)

95

172762LF

625S

2x2x7

1-1/2

6.12"

8-3/4 (222)

2-1/4 (57)

6-1/2 (200)

3-1/4 (83)

10-3/4 (273)

21-5/8 (549)

108

© COPYRIGHT 2010 ITT Corporation

Bell & Gossett

Distribuidor: (55) 5370-9692 5305-9179 5378-7190 6731-0616 http://circuladoresbyg.com

Single phase 115V/230V, "B" model stands for all bronze construction. Dimensions-Inches (mm)


Series 60 Stock Centrifugal Pump Submittal

B-148A

Three phase 208-230V/460V, "B" model stands for all bronze construction. Dimensions -Inches (mm) MODEL

PUMP SIZE

HP

IMP DIA

A

B

C

D

E

H

APP WEIGHT LBS

172725LF

601T

1x1x5-1/4

1/4

4.38"

7-7/8 (200)

-

7-7/8 (200)

4-3/8 (111)

10 (254)

19-7/8 (505)

48

172728LF

B601T

1x1x5-1/4

1/4

4.38"

7-7/8 (200)

-

7-7/8 (200)

4-3/8 (111)

10 (254)

19-7/8 (505)

48

172726LF

602T

1x1x5-1/4

1/3

4.84"

7-7/8 (200)

-

7-7/8 (200)

4-3/8 (111)

10 (254)

19-7/8 (505)

53

172729LF

B602T

1x1x5-1/4

1/3

4.84"

7-7/8 (20)

-

7-7/8 (200)

4-3/8 (111)

10 (254)

19-7/8 (505)

53

172727LF

603T

1x1x5-1/4

1/2

5.25"

7-7/8 (200)

-

7-7/8 (200)

4-3/8 (111)

11 (279)

21-1/8 (537)

55

172730LF

B603T

1x1x5-1/4

1/2

5.25"

7-7/8 (200)

-

7-7/8 (200)

4-3/8 (111)

11 (279)

21-1/8 (537)

55

172731LF

604T

1-1/4x1-1/4x5-1/4

1/4

4.38"

7-7/8 (200)

-

7-7/8 (200)

4-3/8 (111)

10 (254)

19-7/8 (505)

50

172734LF

B604T

1-1/4x1-1/4x5-1/4

1/4

4.38"

7-7/8 (200)

-

7-7/8 (200)

4-3/8 (111)

10 (254)

19-7/8 (505)

50

172732LF

605T

1-1/4x1-1/4x5-1/4

1/3

4.84"

7-7/8 (200)

-

7-7/8 (200)

4-3/8 (111)

10 (254)

19-7/8 (505)

55

172735LF

B605T

1-1/4x1-1/4x5-1/4

1/3

4.84"

7-7/8 (200)

-

7-7/8 (200)

4-3/8 (111)

10 (254)

19-7/8 (505)

55

172733LF

606T

1-1/4x1-1/4x5-1/4

1/2

5.25"

7-7/8 (200)

-

7-7/8 (200)

4-3/8 (111)

11 (279)

21-1/8 (537)

57

172736LF

B606T

1-1/4x1-1/4x5-1/4

1/2

5.25"

7-7/8 (200)

-

7-7/8 (200)

4-3/8 (111)

11 (279)

21-1/8 (537)

57

172737LF

607T

1-1/2x1-1/2x5-1/4

1/3

4.38"

7-7/8 (200)

-

7-7/8 (200)

4-3/8 (111)

10 (254)

20-7/16 (519)

59

172740LF

B607T

1-1/2x1-1/2x5-1/4

1/3

4.38"

7-7/8 (200)

-

7-7/8 (200)

4-3/8 (111)

10 (254)

20-7/16 (519)

59

172738LF

608T

1-1/2x1-1/2x5-1/4

1/2

4.94"

7-7/8 (200)

-

7-7/8 (200)

4-3/8 (111)

11 (279)

21-7/16 (545)

61

172741LF

B608T

1-1/2x1-1/2x5-1/4

1/2

4.94"

7-7/8 (200)

-

7-7/8 (200)

4-3/8 (111)

11 (279)

21-7/16 (545)

61

172739LF

609T

1-1/2x1-1/2x5-1/4

3/4

5.25"

7-7/8 (200)

-

7-7/8 (200)

4-3/8 (111)

11 (279)

21-7/16 (545)

63

172742LF

B609T

1-1/2x1-1/2x5-1/4

3/4

5.25"

7-7/8 (200)

-

7-7/8 (200)

4-3/8 (111)

11 (279)

21-7/16 (545)

63

172743LF

610T

2x2x5-1/4

1/2

4.12"

7-7/8 (200)

-

7-7/8 (200)

4-3/8 (111)

11 (279)

21-11/16 (551)

63

172746LF

B610T

2x2x5-1/4

1/2

4.12"

7-7/8 (200)

-

7-7/8 (200)

4-3/8 (111)

11 (279)

21-11/16 (551)

63

172744LF

611T

2x2x5-1/4

3/4

4.75"

7-7/8 (200)

-

7-7/8 (200)

4-3/8 (111)

11 (279)

21-11/16 (551)

71

172747LF

B611T

2x2x5-1/4

3/4

4.75"

7-7/8 (200)

-

7-7/8 (200)

4-3/8 (111)

11 (279)

21-11/16 (551)

71

172745LF

612T

2x2x5-1/4

1

5.25"

7-7/8 (200)

-

7-7/8 (200)

4-3/8 (111)

11 (279)

23-5/8 (600)

78

172748LF

B612T

2x2x5-1/4

1

5.25"

7-7/8 (200)

-

7-7/8 (200)

4-3/8 (111)

11 (279)

23-5/8 (600)

78

172949LF

626T

3x3x5-1/4

3/4

4.375"

7-7/8 (200)

-

7-7/8 (200)

4-3/8 (111)

11 (279)

20-7/16 (520)

77

172951LF

B626T

3x3x5-1/4

3/4

4.375"

7-7/8 (200)

-

7-7/8 (200)

4-3/8 (111)

11 (279)

20-7/16 (520)

77

172953LF

627T

3x3x5-1/4

1-1/2

5.25"

6-1/2 (165)

-

6-1/2 (165)

3-1/4 (83)

10-3/4 (273)

21-1/8 (536)

87

172955LF

B627T

3x3x5-1/4

1-1/2

5.25"

6-1/2 (165)

-

6-1/2 (165)

3-1/4 (83)

10-3/4 (273)

21-1/8 (536)

87

172756LF

621T

1-1/2x1-1/2x6-1/4

1/2

4.88"

7-7/8 (200)

-

7-7/8 (200)

4-3/8 (111)

11 (279)

21-5/6 (541)

66

172772LF

B621T

1-1/2x1-1/2x6-1/4

1/2

4.88"

7-7/8 (200)

-

7-7/8 (200)

4-3/8 (111)

11 (279)

21-5/6 (541)

66

172749LF

613T

1-1/2x1-1/2x6-1/4

3/4

5.75"

7-7/8 (200)

-

7-7/8 (200)

4-3/8 (111)

11 (279)

21-5/6 (541)

68

172750LF

614T

1-1/2x1-1/2x6-1/4

1

6.25"

7-7/8 (200)

-

7-7/8 (200)

4-3/8 (111)

11 (279)

21-5/16 (541)

85

172774LF

B614T

1-1/2x1-1/2x6-1/4

1

6.25"

7-7/8 (200)

-

7-7/8 (200)

4-3/8 (111)

11 (279)

21-5/16 (541)

85

172751LF

615T

2x2x6-1/4

3/4

5.62"

7-7/8 (200)

-

7-7/8 (200)

4-3/8 (111)

11 (279)

21-7/16 (545)

77

172776LF

B615T

2x2x6-1/4

3/4

5.62"

7-7/8 (200)

-

7-7/8 (200)

4-3/8 (111)

11 (279)

21-7/16 (545)

77

172752LF

616T

2x2x6-1/4

1

6.22"

7-7/8 (200)

-

7-7/8 (200)

4-3/4 (121)

9-3/4 (248)

21-7/16 (545)

86

172759LF

622T

1-1/2x1-1/2x7

3/4

5.50"

7-7/8 (200)

-

7-7/8 (200)

4-3/8 (111)

11 (279)

23-5/8 (600)

81

172760LF

623T

1-1/2x1-1/2x7

1

6.0"

7-7/8 (200)

-

7-7/8 (200)

4-3/4 (121)

11 (279)

23-5/8 (600)

90

172753LF

617T

1-1/2x1-1/2x7

1-1/2

6.5"

6-1/2 (165)

-

6-1/2 (165)

3-1/4 (83)

10-3/4 (273)

21-1/8 (536)

102

172672LF

618T

1-1/2x1-1/2x7

2

7"

6-1/2 (165)

-

6-1/2 (165)

3-1/4 (83)

10-3/4 (273)

23-3/8 (543)

115

172763LF

624T

2x2x7

1

5.69"

7-7/8 (200)

-

7-7/8 (200)

4-3/8 (111)

9-3/4 (248)

23-7/8 (606)

95

172764LF

625T

2x2x7

1-1/2

6.12"

6-1/2 (165)

-

6-1/2 (165)

3-1/4 (83)

10 (254)

21-3/8 (543)

108

172754LF

619T

2x2x7

2

6.5"

6-1/2 (165)

-

6-1/2 (165)

3-1/4 (83)

10 (254)

21-3/8 (543)

118

172673LF

620T

2x2x7

3

7"

6-1/2 (165)

-

6-1/2 (165)

3-1/4 (83)

11-3/8 (289)

22-1/4 (565)

131

Xylem Inc. 8200 N. Austin Avenue Morton Grove, IL 60053 Phone: (847)966-3700 Fax: (847)965-8379 www.xyleminc.com/brands/bellgossett

Distribuidor: (55) 5370-9692 5305-9179 5378-7190 6731-0616 http://circuladoresbyg.com

PART #

TODOS Recirculadores para Agua Caliente Bell & Gossett Especificaciones http://circuladoresbyg.com  

Recirculadores para Agua Caliente Bell & Gossett TODOS. Especificaciones http://circuladoresbyg.com

TODOS Recirculadores para Agua Caliente Bell & Gossett Especificaciones http://circuladoresbyg.com  

Recirculadores para Agua Caliente Bell & Gossett TODOS. Especificaciones http://circuladoresbyg.com

Profile for xbombas

Recommendations could not be loaded

Recommendations could not be loaded

Recommendations could not be loaded

Recommendations could not be loaded