Issuu on Google+

2014 Edition

Europe’s largest range of EV charging Solutions EV

Join the EVolution


EV CHARGING AT ROLEC HQ

Rolec EV is a division of Rolec Services Limited of Boston, Lincolnshire, U.K. established in 1990 and widely recognised as one of the world’s leading specialists in the design, manufacture and installation of both outdoor and indoor electrical connection, hook-up, charging and distribution equipment.

02

With over 20 years’ experience in manufacturing outdoor electrical connection and charging equipment for marina and leisure industries worldwide, Rolec EV is well-placed to deliver high quality, fit for purpose, yet cost-effective EV charging stations and solutions to the electric vehicle charging industry.

To view our full product range and download product information visit www.rolecserv.com


Contents EV Charging Industry General Terminology 05 WallPod EV : Commercial Charge

06 / 07

WallPod EV : HomeCharge

08 / 09

EV : SecuriCharge

10 / 11

WallPod : EV Ready

12 / 13

WallPod EV : BikeCharge

14 / 15

MultiMode & Economy Boost

16 / 17

WallPod EV Charging Post & Accessories

18 / 19

EV : BasicCharge

20 / 21

AutoCharge : Pedestal

22 / 23

AutoCharge : Wall Unit

24 / 25

EV StreetServ

26 / 27

EV : Pay to Charge Solutions (Inc P.A.Y.G)

28

EV : CoinMaster - Pay Centre & key-switch 29 EV Charging Leads & Accessories

30 / 31

EV : ChargeCheck √

32 / 33

Rolec EV charging station locations

34 / 35

Get in touch call ++44 (0)1205 724754 or email rolec@rolecserv.co.uk

03


FACTORY

HOSPITAL HOTEL

HOME

CINEMA

EV Charging Industry: Rolec EV Leads from the front Rolec EV has been actively involved in the EV charging industry for over 5 years and is working closely with many of the world’s leading Electric Vehicle manufacturers, as well as being a Council Member of the UK EVSE Association and sitting on the Ministerial Round Table at Government level providing advise/assistance on the implementation of a nationwide charging infrastructure. During our 5 year involvement, Rolec EV has become one of, if not the UK’s leading designer and manufacturer of EV charging points and takes credit for

04

Having already manufactured and supplied over 10,000 charging points throughout the UK, from low-cost WallPod EV home charging units Recent achievements include being through to our state of the art awarded the internationally coveted AutoCharge on-street public charging Renault ZE Ready 1.2 Accreditation pedestals, incorporating RFID and and the Nissan Europe Charging GPRS communication systems, Rolec Compatibility Accreditation. EV has a charging solution for every Rolec EV are also delighted to have budget and location. been chosen by BMW to supply and install the charging points for the multi-regional launch of the new BMW i3 as well as being the preferred supplier of EV charging points to the island of Jersey. producing the largest and most comprehensive range of electric vehicle charging points in Europe.

To view our full product range and download product information visit www.rolecserv.com


CAR PARK

EV Charging Industry General terminoolgy • EV = Electric Vehicle • PHEV = Plug-in Hybrid Electric Vehicle • EVSE = Electric Vehicle Supply Equipment • Fast Charge = Normally 16amp or 32amp AC charging • Rapid Charge = Direct current (DC) charging • Mode 2 = Mains AC charging, usually utilising a 13amp socket and built-in IEC61851-1 communications unit within the charging lead • P.A.Y.G = Pay-as-you-go charging solution

• Communication unit = Normally referred to as comms unit, being the IEC61851-1 unit based in the charging station that communicates with the car to initiate and deactivate charging sequences • Mode 3 = Mains AC charging from a charging station with builtin IEC61851-1 communication • J1772 = Type 1 charging usually via a 16amp or 32amp tethered lead • IEC62196 = Type 2 charging usually via a 16amp or 32amp socket but also available in tethered lead version

• Tethered lead = Usually a Type 1 or 2 cable and plug charging solution permanently affixed to the charging station • Dummy socket = Sometimes referred to as a stowage socket and usually used to store a J1772 or IEC62196 tethered lead charging plug • LED status indicator = Changes colour to indicate the status of the charging station / point • Hatch lock = Security locking mechanism found in the IEC62196 charging socket

Get in touch call ++44 (0)1205 724754 or email rolec@rolecserv.co.uk

05


WallPod EV : Commercial Charge • ZE Ready 1.2 Tested and Accredited • The perfect low-cost, full mode 3 fast charger for the work place or commercial location • OLEV approved • IP65 weatherproof • CE Certified • BSI Certificated • Corrosion resistant • UV stabilized • Incredibly hard-wearing • Built-in overload and DC sensitive fault current protection

WallPod EV: Commercial Charge is a simple, low-cost, easy to install mode 3 fast-charge EV charging station offering either 16amp or 32amp (type 2) IEC62196 sockets complete with hatch lock. Designed specifically for charging electric vehicles in commercial locations such as offices, factories, restaurants, hotels, sport venues, etc for staff, customers or fleets.

Join the EVolution EV

Europe’s largest range of EV charging solutions


Specifications

• Warm white base unit (other colours available upon request) • Green service pods (other colours available upon request) • Flame retardant to UL94 Flame rating at V2 for 1.5 and 3.0mm • Glow wire rating tested to IEC60695-2-13 • BSI certificated to BS EN 60335-1 for safe use in the home • Manufactured in compliance with BS7671 wiring regulations • Compliant with IET EV regulations

Photos / images are not contractual

A low-cost mode 3 EV charging station designed for commercial locations

• Corrosion resistant • UV stabilised • BS EN 60529 : IP65 category 1 certification (weatherproof) • Operating temperature – 30ºC to + 50ºC

Performance

• Easy to install / low maintenance • Designed to be permanently located indoors or outdoors • CE approved Type 2 IEC62196 charging socket c/w with hatch lock • Available in both 16amp (3.6kW) or 32amp (7.2kW) sockets • Mode 3 IEC61851-1 compliant communication protocol • Built in LED charging staus indicator • A built-in 16amp or 32amp RCBO accessible via an IP65 rated access door • Full overload and DC sensitive fault current protection • 230V AC / 50Hz • Multiple supply cable entry points

Options

• Optional GPRS communication facility • Optional tethered lead version • Optional facility to lock RCBO access door • Optional built-in Class 1 kWh meter • Optional built-in time clock for charging during cheap rate tariff • Optional emergency charge facility (time clock option) • Optional security key-switch control • Optional corporate branding • Optional OCPP communication protocol compliant • Optional back office management facility • Eligible for government grant funding (OLEV T&C’s apply)

07


WallPod EV : HomeCharge • ZE Ready 1.2 Tested and Accredited • Believed to be the lowest priced full mode 3 fast charger in the UK • OLEV approved • IP65 weatherproof • CE Certified • BSI Certificated • Corrosion resistant • UV stabilised • Incredibly hard-wearing • Built-in overload and DC sensitive fault current protection

WallPod EV : HomeCharge is a simple, low-cost and easy to install mode 3, 16amp or 32amp EV charging station designed specifically for charging electric vehicles at home. Available in a number of different formats, including: • J1772 (type 1) tethered lead charging gun • IEC62196 (type 2) tethered lead charging gun • IEC62196 (type 2) charging socket complete with hatch-lock Why not add a 13amp domestic socket to your charging unit for outdoor maintenance or mowing the lawn with ease!

Join the EVolution EV

Europe’s largest range of EV charging solutions


Specifications

• Warm white base unit (other colours available upon request) • Green service pods (other colours available upon request) • Flame retardant to UL94 Flame rating at V2 for 1.5 and 3.0mm • Glow wire rating tested to IEC60695-2-13 • BSI certificated to BS EN 60335-1 for safe use in the home • Manufactured in compliance with BS7671 wiring regulations • Compliant with IET EV regulations

Photos / images are not contractual

A low-cost EV mode 3 charging station designed for charging electric vehicles at home

• Corrosion resistant • UV stabilised • BS EN 60529 : IP65 category 1 certification (weatherproof) • Operating temperature – 30ºC to + 50ºC

Performance

• Easy to install / low maintenance • Designed to be permanently located indoors or outdoors • Available in both 16amp (3.6kW) or 32amp (7.2kW) • Mode 3 IEC61851-1 compliant communication protocol • Built-in LED charging status indicator • A built-in 16amp or 32amp RCBO accessible via an IP65 rated access door • Full overload and DC sensitive fault current protection • 230V AC / 50Hz • Multiple supply cable entry points

Options

• CE approved J1772 (type 1) charging gun c/w 5m tethered lead • CE approved IEC62196 (type 2) charging gun c/w 5m tethered lead • CE approved IEC62196 (type 2) charging socket c/w hatch lock • Optional wall mountable secure charging gun holster (tethered lead versions) • Optional GPRS communication facility • Optional facility to lock RCBO access door • Optional addition of a 13amp outdoor maintenance socket (Multi-mode) • Optional built-in Class 1 kWh meter • Optional built-in time clock for charging during cheap rate tariff • Optional emergency charge facility (time clock option) • Optional security key-switch control • Optional corporate branding • Optional OCPP communication protocol compliant • Back office management facility • Eligible for government grant funding (OLEV T&C’s apply)

09


EV : SecuriCharge • Heavy duty discrete wall mounted charging unit • Available in black or grey (other colours available) • Secure lock-away charging socket • 16 amp or 32 amp type 2 mode 3 charging • 3.6kW/7.2kW/11kW/22kW charging options • key-switch control as standard • Built in electrical protection • Built in LED status indicator • Optional pay-to-charge (P.A.Y.G.) facility using either coin or token • Charge time availability screen (P.A.Y.G. only) Coin or token: Pay-to-charge

Key-switch control

EV: SecuriCharge is a heavy duty, vandal resistant yet discrete wall mounted charging unit, designed specifically for public and exposed locations. This versatile unit charges via its IEC 62196 type 2 mode 3 charging socket(s), which are securely locked away when not in use. EV: SecuriCharge is available in two formats including key-switch-control or pay-to-charge via coin or token. Ideal locations include hotels, car parks, offices, factories, warehouses, restaurants, stadiums, leisure centres, retail premises, etc.

Join the EVolution EV

Europe’s largest range of EV charging solutions


Specifications

• Manufactured in heavy duty, vandal resistant Zintec • Standard powder-coated colours are black or grey • Manufactured to IP65 weatherproof rating • Designed to be permanently located and used outdoors • Easy to install/easy to maintain • Wall unit size (key-switch) 50 cm x 20 cm x 12.5 cm • Wall unit size (P.A.Y.G.) 56 cm X 220 cm X 12.5 cm

Photos / images are not contractual

A heavy-duty yet discrete mode 3 charging station designed specifically for public and exposed locations

• Manufactured in compliance with BS7671 wiring regulations • Compliant with IET EV regulations • Corrosion resistant/UV stabilised • Operating temperature -30c to + 50c

Performance

• 1 way or 2 way type 2 IEC 62196 charging socket options • 16 amp or 32 amp single or 3 phase charging • 3.6 kW/7.2 kW/11kW/22kW charging options • Each socket comes complete with security hatch-lock • Each socket comes complete with an LED status indicator • Each socket is mode 3 IEC 61851-1 communication compliant • Each socket is overload and DC sensitive fault current protected • Socket is magnetically locked away when not in use • key-switch control of charging sockets (non P.A.Y.G.)

Options

• Available in alternative colours • Available in two-tone colouring • Available in powder coated stainless steel • Corporate branding • Built in class 1 MID approved kWh meter • Pay-as-you-charge (P.A.Y.G.) coin or token system

Pay to charge solutions

• Key-switch control – free to use • Key-switch control – pre-paid • Coin payment to charge (P.A.Y.G.) • Token payment to charge • Charge time availability screen (coin/token systems only)

11


WallPod : EV Ready The Entry Level EV Charger • • • •

Charges almost all current EVs at mode 2 Includes an IP65 outdoor 13amp socket Includes built-in overload/fault current protection Can be used as an EV charger or a 13amp outdoor maintenance socket • Fully prepared for future upgrade to full mode 3 fast charging

WallPod : EV Ready is a low-cost solution able to charge in mode 2 format (13amp domestic socket) almost every electric vehicle currently on the market. This unit has also been designed and prepared to be quickly and easily upgraded to full mode 3 charging as and when required. This 13amp IP65 domestic socket complete with 10amp or 16amp overload and 30mA fault current protection can also double up as the home’s outdoor maintenance socket.

Join the EVolution EV

Europe’s largest range of EV charging solutions


Specifications

• Warm white base unit (other colours available upon request) • Green service pods (other colours available upon request) • Flame retardant to UL94 Flame rating at V2 for 1.5 and 3.0mm • Glow wire rating tested to IEC60695-2-13 • BSI certificated to BS EN 60335-1 for safe use in the home • Manufactured in compliance with BS7671 wiring regulations • Compliant with IET EV regulations

Photos / images are not contractual

A low-cost mode 2 station designed for EV charging as well as an outdoor general electric supply unit

• Corrosion resistant • UV stabilised • BS EN 60529 : IP65 category 1 certification (weatherproof) • Operating temperature – 30ºC to + 50ºC

Performance

• Easy to install / low maintenance • Designed to be permanently located indoors or outdoors • Able to charge almost all current electric vehicles using mode 2 leads • A 13amp socket protected by an IP65 rated access door • 13amp domestic socket will fully charge an electric vehicle overnight • Doubles as a home outdoor maintenance socket • A built-in 10amp or 16amp 30mA RCBO accessible via an IP65 rated access door • Full overload and fault current protection • 230V AC / 50Hz • Cable entry points in top, bottom and back

Options

• Optional facility to lock plug in place whilst charging • Optional facility to lock RCBO access door • Optional built-in Class 1 kWh meter • Optional built-in time clock for charging on a cheap rate tariff • Optional corporate branding • Wall, Wallplate, galvanised post, wooden post, aluminium plinth mountable

Advantages

• Low cost EV charging in mode 2 format • Meets planning permission requirements for EV charging • Offers 13amp outdoor maintenance socket • Easily upgradeable to full mode 3 16amp / 32amp fast charging • Mode 3 upgrade kits widely available through local wholesalers

13


WallPod EV : BikeCharge • Ideal for charging electric bikes, scooters, mobility vehicles, etc • Includes an IP65 outdoor 13amp socket • Includes built-in overload/fault current protection • Can be used as an EV charger or a 13amp outdoor maintenance socket

WallPod EV : BikeCharge is a low-cost solution designed specifically for providing safe and secure AC charging for electric pushbikes, scooters, mopeds and mobility vehicles, as well as doubling up as an outdoor IP65 rated 13amp maintenance socket.

Join the EVolution EV

Europe’s largest range of EV charging solutions


Specifications

• Warm white base unit (other colours available upon request) • Green service pods (other colours available upon request) • Flame retardant to UL94 Flame rating at V2 for 1.5 and 3.0mm • Glow wire rating tested to IEC60695-2-13 • BSI certificated to BS EN 60335-1 for safe use in the home • Manufactured in compliance with BS7671 wiring regulations • Compliant with IET EV regulations

Photos / images are not contractual

A low-cost mode 2 station designed for charging mopeds and mobility vehicles

• Corrosion resistant • UV stabilised • BS EN 60529 : IP65 category 1 certification (weatherproof) • Operating temperature – 30ºC to + 50ºC

Performance

• Easy to install / low maintenance • Designed to be permanently located indoors or outdoors • Able to charge almost all types of electric pushbikes, scooters, mopeds, and mobility vehicles • A 13amp socket protected by an IP65 rated access door • 13amp domestic socket will fully charge an electric bike or mobility vehicle • Doubles as a home outdoor maintenance socket • A built-in 10amp or 16amp 30mA RCBO accessible via an IP65 rated access door • Full overload and fault current protection • 230V AC / 50Hz • Cable entry points in top, bottom and back

Options

• Optional facility to lock plug in place whilst charging • Optional facility to lock RCBO access door • Optional built-in class 1 kWh meter • Optional built-in time clock for charging on a cheap rate tariff • Optional corporate branding • Wall, Wallplate, galvanised post, wooden post, aluminium plinth mountable

Advantages

• Low-cost EV charging for your bike / scooter / mobility vehicle • Meets planning permission requirements for EV charging • Offers 13amp outdoor maintenance socket • Easily upgradable to full mode 3 16amp or 32amp fast charging • Mode 3 upgrade kits widely available through local wholesalers

15


WallPod EV : Multi-mode EV charging and home maintenace in a single unit. WallPod EV: Multi-Mode is a simple, low-cost, easy to install charging unit offering both mode 3, 16amp or 32amp type 1 and type 2 EV charging as well as an IP65 rated 13amp socket. Ideal for both mode 3 charging and home maintenance use.

16

To view our full product range and download product information visit www.rolecserv.com


WallPod EV : Economy Boost Off-peak charging and boost charge ability. WallPod EV: Economy Boost is a simple low-cost and easy to install mode 3, 16amp or 32amp EV charging station designed specifically for charging electric vehicles at home. This unit has been designed with a built-in time clock that allows the charging of the electric vehicle to automatically commence during off-peak electric rates but should additional EV charging be required at any time a simple charge boost button is available.

Get in touch call ++44 (0)1205 724754 or email rolec@rolecserv.co.uk

17


2

4

1 3

5

WallPod mounting posts, plinths & plates 1. Modern and stylish WallPod EV: Mounting Plinth 2. Natural looking, heavy duty Hard Wood WallPod EV: Mounting Post 3. Low cost WallPod EV: Box Section Mounting Post 4. Low cost WallPod EV: Angle Iron Mounting Post 5. Steel powder coated and screen printed Mounting plate

18

To view our full product range and download product information visit www.rolecserv.com


1

WallPod Accessories

WallPod EV: Remote Charge Gun Houlster

WallPod EV: Key-switch Control

WallPod EV: Switchgear Pod Lock

WallPod EV: kWh Mini Meter

Get in touch call ++44 (0)1205 724754 or email rolec@rolecserv.co.uk

19


EV : BasicCharge The Low Cost EV Charging Pedestal • • • • • • • • • •

1way and 2way charging unit IEC62196 type 2 charging sockets with hatch-lock Mode 3 IEC61851-1 compliant Built-in LED status indicator Built-in photocell controlled illumination Built-in overload and DC sensitive fault current protection Surface or root mountable Plugged in Places compliant Back office / OCPP compliant Pay-to-use options (P.A.Y.G)

The EV: BasicCharge pedestal is the brother to Rolec’s world-leading Classic utility pedestal which boasts over 50,000 in use worldwide. This mass produced, tried and tested pedestal is, we believe, the most affordable and adaptable EV charging pedestal in the world. Ideal for private car parks, offices, factories, hotels, cinemas, leisure centres, shops, warehouses, hospitals, schools – in fact any moderately secure environment

Join the EVolution EV

Europe’s largest range of EV charging solutions


Specifications

• Built around a heavy-duty, galvanised steel chassis • High impact resistant black Foamex outer shell • BS EN 60529: IP Category 1 (weatherproof) • Pedestal height 1000mm (plus lens, 165mm) • Pre-drilled fixing and cable entry points (all types of cable) • Manufactured in compliance with BS7671 wiring regulations • Compliant with IET EV regulations • Corrosion resistant • UV stabilised • Operating temperature – 30ºC to + 50ºC

Performance

• 1way or 2way 16amp (3.6kW) or 32amp (7.2kW) single phase type 2 IEC 62196 socket • Each socket comes complete with security hatch-lock • Each socket comes complete with an LED status indicator • Each socket is mode 3 IEC 61851-1 communication compliant • Each socket is overload and DC sensitive fault current protected • Every BasicCharge comes complete with photocell controlled 4watt LED illumination • Easy to install / easy to maintain • Designed to be permanently located and used outdoors • Surface or root mountable

Options

• Available in alternative colours • Available with powder coated aluminium outer shell • Available with powder coated stainless steel outer shell • 16amp or 32amp 5metre J1772 type 1 tethered lead • 16amp or 32amp 5metre IEC 62196 type 2 tethered lead • IP65 rated 13amp domestic socket (mode 2 charging or maintenance socket) • 16amp and 32amp BS4343 industrial sockets • Three phase charging including 32amp (22kW) • Built-in class 1 MID approved kWh meter • Built-in time-clock for charging on cheap rate tariff • Emergency charge facility with time-clock option • Galvanised steel ground mounting base/root • Corporate branding • Back office / OCPP facilities • Eligible for Government grant funding (OLEV T&Cs apply)

Pay to charge solutions

• Coin / token • RFID – SmartCard, Fob (private, corporate loyalty, membership) • Web pay • I-tag • Mobile phone • Free-to-use • Free-to-use / key-switch control

Photos / images are not contractual

A standalone EV charging pedestal designed for private locations

21


: Pedestal On-street and Car Park EV charging • • • • • • • • • • • • •

Heavy-duty, hard-wearing EV charging pedestal IEC62196 type 2 charging sockets with hatch-lock Built-in photocell controlled illumination Easy to install / easy to maintain 1way and 2way charging unit Optional lockaway charging socket Mode 3 IEC61851-1 compliant Built-in LED status indicator Built-in overload and DC sensitive fault current protection Surface or root mountable Plugged in Places compliant Back office / OCPP compliant Pay-to-use options (P.A.Y.G)

The AutoCharge EV charging pedestal is a heavy-duty, hard-wearing, standalone EV charging pedestal designed and manufactured specifically for public locations. This versatile pedestal comes in two size options: • Standard – free-to-charge • Midi – pay-to-charge (PAYG)

Join the EVolution EV

Europe’s largest range of EV charging solutions


Specifications

• Manufactured in heavy duty, vandal-resistant powder coated black steel • Manufactured to IP65 weatherproof rating • Lockable component and termination access door • Pre-drilled fixing and cable entry points (All types of cable) • Manufactured in compliance with BS7671 wiring regulations • Compliant with IET EV regulations • Corrosion resistant • UV stabilised • Operating temperature – 30ºC to + 50ºC

Performance

• 1way or 2way 16amp (3.6kW) or 32amp (7.2kW) single phase type 2 IEC 62196 socket • Each socket comes complete with security hatch-lock • Each socket comes complete with an LED status indicator • Each socket is mode 3 IEC 61851-1 communication compliant • Each socket is overload and DC sensitive fault current protected • Easy to install / easy to maintain • Designed to be permanently located and used outdoors • Surface mountable

Options

• Available in alternative colours • Available in two-tone colouring • Available in powder coated stainless steel • 16amp or 32amp 5metre J1772 type 1 tethered lead • 16amp or 32amp 5metre IEC 62196 type 2 tethered lead • IP65 rated 13amp domestic socket (mode 2 charging or maintenance socket) • 16amp and 32amp BS4343 industrial sockets • Three phase charging including 32amp (22kW) • Superfast charging at 63amp three phase (43kW) • Built-in class 1 MID approved kWh meter • Built-in time-clock for charging on cheap rate tariff • Emergency charge facility with time-clock option • Galvanised steel ground mounting base/root • Corporate branding • Back office / OCPP facilities • Eligible for Government grant funding (OLEV T&Cs apply)

Pay to charge solutions

• Free-to-use • Free-to-use / key-switch control • Coin / token • RFID – SmartCard, Fob (private, corporate loyalty, membership) • Web pay • I-tag • Mobile phone • Chip, PIN and contactless (Visa, Mastercard, etc)

Photos / images are not contractual

A standalone EV charging pedestal designed for public locations

23


: Wall Unit On-street and Car Park EV charging • • • • • • • • •

Heavy-duty, hard-wearing EV charging wall unit IEC62196 type 2 charging sockets with hatch-lock Built-in photocell controlled illumination Easy to install / easy to maintain 1way and 2way charging unit Optional lockaway charging socket Mode 3 IEC61851-1 compliant Built-in LED status indicator Built-in overload and DC sensitive fault current protection • Plugged in Places compliant • Back office / OCPP compliant • Pay-to-use options (P.A.Y.G)

The AutoCharge EV charging unit is a heavy-duty, hard-wearing, wall mountable EV charging unit designed and manufactured specifically for public locations. This versatile wall unit comes in a number of sizes to suit customer requirements and charging solutions, including: • 450mm, 600mm and 80mm – free-to-charge • 900mm – pay-to-charge (PAYG)

Join the EVolution EV

Europe’s largest range of EV charging solutions


Specifications

• Manufactured in heavy duty, vandal-resistant powder coated black steel • Manufactured to IP65 weatherproof rating • Lockable component and termination access door • Pre-drilled fixing and cable entry points (All types of cable) • Manufactured in compliance with BS7671 wiring regulations • Compliant with IET EV regulations • Corrosion resistant • UV stabilised • Operating temperature – 30ºC to + 50ºC

Performance

• 1way or 2way 16amp (3.6kW) or 32amp (7.2kW) single phase type 2 IEC 62196 socket • Each socket comes complete with security hatch-lock • Each socket comes complete with an LED status indicator • Each socket is mode 3 IEC 61851-1 communication compliant • Each socket is overload and DC sensitive fault current protected • Easy to install / easy to maintain • Designed to be permanently located and used outdoors • Wall mountable

Options

• Available in alternative colours • Available in two-tone colouring • Available in powder coated stainless steel • 16amp or 32amp 5metre J1772 type 1 tethered lead • 16amp or 32amp 5metre IEC 62196 type 2 tethered lead • IP65 rated 13amp domestic socket (mode 2 charging or maintenance socket) • 16amp and 32amp BS4343 industrial sockets • Three phase charging including 32amp (22kW) • Superfast charging at 63amp three phase (43kW) • Built-in class 1 MID approved kWh meter • Built-in time-clock for charging on cheap rate tariff • Emergency charge facility with time-clock option • Corporate branding • Back office / OCPP facilities • Eligible for Government grant funding (OLEV T&Cs apply)

Pay to charge solutions

• Free-to-use • Free-to-use / key-switch control • Coin / token • RFID – SmartCard, Fob (private, corporate loyalty, membership) • Web pay • I-tag • Mobile phone • Chip, PIN and contactless (Visa, Mastercard, etc)

Photos / images are not contractual

Wall mountable EV charging unit

25


EV StreetServ • • • •

Heavy-duty post IEC 62196 type charging socket Optional 13amp domestic socket Ideal for mode 2 charging, localised maintenance, market stalls, food/retail trailers • Door lockable whilst in use • Built-in overload and DC sensitive fault current protection

EV StreetServ is a heavy duty, hardwearing, vandal resistant EV charging post designed specifically for high risk, susceptible, public locations such as high streets, marketplaces, public car parks, sports stadiums etc. EV StreetServ is able to provide a lock-away IEC 62196 type 2 mode 3 charging socket and optional 13amp maintenance socket.

Join the EVolution EV

Europe’s largest range of EV charging solutions


Specifications

• Heavy duty steel construction • 2 styles available (curved top and ball top) • Powder-coated black finish • Hinged lockable access door • Door lockable whilst in use • Post height approx. 1100mm (subject to design) • Corrosion resistant

Photos / images are not contractual

Street furniture style unit ideal for marketplaces

• Manufactured in compliance with BS7671 wiring regulations • Compliant with IET EV regulations

Performance

• Easy to install / low maintenance • Designed to be permanently located and used outdoors

Options

• Able to offer 16amp or 32amp IEC62196 (type 2) sockets • Single and three phase charging available (3.6 kW, 7.2 kW, 22 kW) • Mode 3 IEC61851 compliant communication protocol • 13amp domestic, 16amp or 32amp industrial sockets available • Built-in overload and DC sensitive fault current protection • Optional hatch lock facility for locking type 2 charging lead into socket • Optional LED charging status indicator • Optional built-in Class 1 kWh meter or time clock • Optional corporate branding • Optional ground mounting base • OCPP communication protocol compliant • Back office management facility • Eligible for government grant funding (OLEV T&C’s apply)

Control solutions

• Free-to-use • Free-to-use / key-switch

27


EV : PAY TO CHARGE SOLUTIONS

EV : PAY TO CHARGE SOLUTIONS

EV : Pay to Charge Solutions Rolec EV manufactures a comprehensive range of Pay-to-Charge (P.A.Y.G) solutions which are designed to be compatible and compliment the majority of the charging units in our portfolio, including AutoCharge wall units, AutoCharge pedestals, EV: SecuriCharge wall units and the wall-mounted EV Pay Centres.

Chip and pin

NFC mobile payment

Pay by coin/token

Wristband payment

Pay by internet

Contactless payment

Loyalty card payment

Members RFID systems

Pay-to-Charge Solutions include: • • • • • • •

Pre-paid Key-Switch Control Pre-paid Token System Coin Payment to Charge (P.A.Y.G.) RFID SmartCard/Fob or iTag Chip and Pin Bank Card (P.A.Y.G.) Contactless Bank Card (P.A.Y.G.) Web Pay and Mobile Phone

28

To view our full product range and download product information visit www.rolecserv.com


KEY-SWITCH CONTROL

EV : COINMASTER

EV : PAYCENTRE

Compatible with almost every EV on the market

EV : COINMASTER

EV : CoinMaster

EV : PayCentre

An Electric Vehicle Pay-to-Charge Management System using either coins or tokens and able to:

The Rolec EV: Pay Centre is a system designed to offer multi-point charging solutions controlled and managed via a single point, centralised Pay Station. The EV: Pay Centre is ideal for carparks, particularly multi-storey and underground locations.

• Manage multiple charging points • Manage type 1 and type 2 mode 3 charging • Manage 16 amp (3.5 kW) and 32 amp (7.2 kW) charging • Manage superfast 11 kW and 22 kW charging • Provide charge time availability data • Accept UK currency (coins) • Accept tokens Manufactured to suit the following Rolec electric vehicle charging stations: • EV: SecuriCharge • AutoCharge: Pedestal • AutoCharge: Wall Unit • EV: PayCentre

Key-switch Control Keyswitch management of EV charging is available on all the Rolec EV charging solutions and helps provide an additional level of security and control.

Get in touch call ++44 (0)1205 724754 or email rolec@rolecserv.co.uk

29


EV Charging Leads & Accessories Rolec EV hold the largest stock and widest range of EV charging accessories in the UK • 24/48 hour delivery • IEC 62196 charging sockets • IEC 61851-1 communication units • J1772 (type 1) to IEC 621916 (type 2) charging leads • IEC 62196 (type 2) to IEC 62196 (type 2 ) charging leads • J1772 (type 1) tethered leads • IEC 62196 (type 2) tethered leads • J1772 wall mount charging gun stowage sockets • IEC 62196 wall mount charging gun stowage sockets • Charging plugs • Type A DC sensitive switchgear • LED status indicators • Electrical contactors • Key-switches • EV charging station testers

Rolec EV is a one stop shop for all your EV charging equipment and accessories

Join the EVolution EV

Europe’s largest range of EV charging solutions


• 5m 16amp J1772 (type 1) to IEC 62196 (type 2) charging lead Product code EVPP0140 • 5m 32amp J1772 (type 1) to IEC 62196 (type 2) charging lead Product code EVPP0160 • 5m 16amp IEC 62196 (type 2) to IEC 62196 (type 2) charging lead Product code EVPP0080 • 5m 32amp IEC 62196 (type 2) to IEC 62196 (type 2) charging lead Product code EVPP0100 • 5m 16amp J1772 (type 1) tethered lead Product code EVPL0140 • 5m 32amp J1772 (type 1) tethered lead Product code EVPL0160 • 5m 16amp IEC 62196 (type 2) tethered lead Product code EVPL0070 • 5m 32amp IEC 62196 (type 2) tethered lead Product code EVPL0090 • IEC TO IEC 16a 3Ph 5m lead Product code EVPP0085 • IEC TO IEC 32a 3Ph 5m lead Product code EVPP0105

Sockets

• 16amp/32amp IEC 62196 charging socket Product code EVPL0040 • J1772 wall mount charging gun stowage socket Product code EVPL0120 • IEC 62196 wall mount charging gun stowage sockets Product code EVPL0050

Accessories

• 16amp Type A DC sensitive switchgear Product code ACEQ0110 • 32amp Type A DC sensitive switchgear Product code ACEQ0160 • LED status indicator Product code ACSE0030 • Key-switch Product code ACSF0010 • EV charging station tester (ChargeCheck) Product code EVTU0018

Photos / images are not contractual

Leads

31


EV : ChargeCheck The EV Industry’s Charging Station Tester of Choice • • • • • • • • • •

Simulates an electric vehicle Tests J1772 (type 1) tethered leads Tests IEC62196 (type 2) sockets Tests IEC61851-1 mode 3 communication compliance Tests for correct polarity Tests for earthing presence Tests contactor actions IP65 13amp socket for RCD / RCBO test IP65 13amp socket for earth loop test 1 metre J1772 (type 1) to IEC62196 (type 2) adapter

ChargeCheck

has been designed to provide

every electrician with the ability to confidently carry out a comprehensive and accurate test of any single phase mode 3 type 1 and type 2 EV charging station in the UK.

Join the EVolution EV

Europe’s largest range of EV charging solutions


Photos / images are not contractual

Simulates an electric vehicle Contents

+ 1 x EV : ChargeCheck

Specifications

+ Type 1 to Type 2 Adapter

Carry Bag

• Manufactured in heavy duty polypropylene • Hard-wearing polypropylene carry handle • Impact resistant polycarbonate info fascia • Corrosion resistant • Built-in polarity check LEDs • Built-in earth presence LEDs • Latching test button • J1772 (type 1) test socket and cover • IP65 rated 13amp test socket and cover • 1 metre J1772 (type 1) to IEC62196 (type 2) adapter test lead • Test unit carry bag complete with handle and zipper • Manufactured in compliance with BS7671 wiring regulations • Compliant with IET EV regulations • Size : 450mm length x 150mm width x 140mm depth • Weight : 2.5kgs

Performance

• Simulates an electric vehicle • Tests J1772 (type 1) tethered leads • Tests IEC 62196 (type 2) tethered leads • Tests IEC62196 (type 2) sockets • Tests IEC61851-1 mode 3 communication compliance • Tests for correct polarity • Tests for earthing presence • Tests contactor actions • IP65 13amp socket for RCD / RCBO test • IP65 13amp socket for earth loop test

Options

Test completed / date stickers

33


SHOWROOM

SCHOOL

LEISURE CENTRE

SUPERMARKET

SURGERY

HOTEL

WAREHOUSE

CAR PARK

Rolec EV - Charging stations for every location

34

To view our full product range and download product information visit www.rolecserv.com


POLICE STATION

TOWN CENTRE

EXHIBITION CENTRE

HOME

FLEET DEPOT

UNIVERSITY

RESTAURANT

Get in touch call ++44 (0)1205 724754 or email rolec@rolecserv.co.uk

35


Rolec also manufacture: • Caravan Hook-Up Units • Marina Service Pedestals • Permanent and Temporary Power Solutions

And much more…

EV Head office contact: t: ++44 (0) 1205 724754 f: ++44 (0) 1205 724876 rolec@rolecserv.co.uk

Rolec Services Ltd Ralphs Lane, Frampton West Boston, Lincolnshire UK, PE20 1QU

www.rolecserv.com

© 2014 - Rolec reserves the right to make changes to its product range


EV product brochure 2014