Issuu on Google+

Product properties matched to the application requirements:

Würth SABESTO - the brand for innovative, environmentally friendly chemical service products.

Product Properties Thermal stability

Corrosion protection

Adhesive

Long live

Material compatibility

Dirt repellent

PTFE

HHS 2000

none

HHS FLUID

none

HHS LUBE

OMC 2

HHS GREASE

We have utilised the principles of tribology* as the basis for the development of the new range of adhesive lubricants (see graphic). A self-contained, synchronised, innovative lubricant concept was developed - the new HHS product line.

Solid lubricant

HHS 5000

TR

Performance Reliability

excellent good acceptable

ADHESIVE LUBRICANTS

Lu

Creep capacity

High-pressure resistance

is

Thermal stability

Corrosion protection

Adhesive

Long live

Material compatibility

Dirt repellent

Open steel gearwheels

b ric a t i o n

st

ti m

Requirements for Application

s

Efficiency Op

Application

HHS

n r

PTFE + wax

IBO LO GIE ea W

PTFE

HHS DRYLUBE

They keep things running smoothly!

em

High-pressure resistance

t io

Creep capacity

Fric

Product

HHS ADHESIVE LUBRICANTS

Reduce costs with the right lubricant technology

at

io n

o f m e c h a nic

al

sy

Due to the large number of applications and the different lubricant requirements, the right product selection is of primary importance. Here the following four factors must be taken into account before selecting a lubricant:

Closed steel gearwheels Toothed racks Plastic gearwheels

• Design influences of the lubricating point • Loads on the lubricating point • Types and speeds of movements • Environmental influences

Fast-running chains Thermally loaded chains Guided wire cables

To cover as many areas and needs as possible, particular attention was paid to the viscosity and consistency of the products. The new HHS adhesive lubricant system therefore covers all major viscosity and consistency ranges - from oily and highly creep-active to greasy and highly adhesion-active. Combined with the intelligent, high-quality, matched addition of additives and the use of top-quality ingredients, we guarantee you professional lubricant management with minimal wear and high lubricant reliability. The new HHS system offers a broad range of advantages:

Fast-running wire cables Slide rails/Anti-friction bearings Hinges/Joints Anti-friction bearings Door brakes/Door catch straps

• Maintenance and service costs are reduced. • Lubricating intervals are extended. • Energy is saved by reduced friction. • Wear is minimized by high product quality. • Complete lubricant system for a wide range of applications.

Storage/Preservation Bowden cables Shift, throttle and clutch linkages

Adolf Würth GmbH & Co. KG 74650 Künzelsau, Germany Telefon +49 (0 79 40) 15 - 0 Telefax +49 (0 79 40) 15 -10 00 www.wuerth.com info@wuerth.com

The intelligent lubricant system Product

© by Adolf Würth GmbH & Co. KG Printed in Germany. All rights reserved.

HHS 5000

HHS 2000

HHS FLUID

HHS LUBE

HHS GREASE

HHS DRYLUBE

Lubricant type

High Performance creep oil with PTFE

High-pressure resistant adhesive lubricating oil

Fluid grease resistant to centrifugal force

Dirt-repelling sprayed grease with long-term action and OMC2

White high performance maintenance grease containing PTFE

High Performance dry lubricant resistant to centrifugal force

Base oil/ saponification type

Fully-synthetic oil

High-quality mineral oil + lithium soap

High-quality mineral oil + lithium soap

Synthetic wax

Responsible for the content: PFC Dept. / Süleyman Kozak VSDA Dept. / Karin Fromm Final editing: MWV Dept. / Regina Schäfer Reprinting, wholly or in part, only with permission. MWV - GRAFIS - Delp - 3’ - 03/06 Printed on environmentally friendly paper.

Solid lubricants

We reserve the right to make product changes at any time without prior notice for the purpose of quality improvement. Illustrations may be example illustrations which can differ in their appearance from the products delivered. Errors excepted. We assume no liability for printing errors. Our General Terms and Conditions apply.

Colour

Spring struts very important requirement for the application important requirement for the application less important requirement for the application

For all applications, pre-cleaning of the point to be lubricated with our HHS CLEAN, Art. No. 0893 106 10 is recommended. Due to the new combination of raw materials, the surface is pre-treated for long-term lubrication. Soiled lubricating points are one of the most frequent causes of damage.

This information is intended for informational purposes only, based on our own experience. Preliminary tests are required.

3

* Tribology (definition according to DIN 50323) is the science and technology of interacting surfaces in relative movement. It comprises the entire field of friction and wear, including lubrication and includes corresponding interface interactions, both between solid bodies and between solid bodies and liquids or gases.

Würth UK Ltd · 1 Centurion Way · Erith · Kent · DA18 4AE · Tele – 0870 5987841 · web- www.wurth.co.uk 8

Partially-synthetic Partially-synthetic oil oil + grease

PTFE

none

none

OMC 2

PTFE

PTFE + wax

transparent

yellowish

yellowish

opal green

bright white

yellowish

-20°C 200°C

-35 °C 180°C

-25°C 170°C

-25°C 150 °C

-15 °C 130 °C

-30 °C 100 °C

Aerosol, 500 ml

Aerosol, 500 ml

Aerosol, 500 ml

Aerosol, 500 ml

Aerosol, 400 ml

Aerosol, 400 ml

Temperature Lower operating temperature range Upper operating temperature range

Container size 2


THE WÜRTH HHS ADHESIVE LUBRICANTS AT A GLANCE! High-quality Highly adhesive Safe

Würth SABESTO – the brand for innovative, environmentally friendly chemical service products.

4

HHS 5000

HHS 2000

HHS FLUID

HHS LUBE

HHS GREASE

HHS DRYLUBE

HHS CLEAN

High Performance Fully-Synthetic Creep Oil with PTFE

High-pressure resistant adhesive lubricating oil

Fluid grease resistant to centrifugal force

Dirt-repelling sprayed grease with long-term action and OMC2

White high-performance maintenance grease containing PTFE

High-performance dry synthetic wax resistant to centrifugal force

Highly-effective pre-cleaner with adhesion intensifier

On the safe side!

The Original!

Oil & Grease = Duo-Effect!

Outdoor-Pro!

Everything in view!

Round and round it goes!

Puts an end to grease!

Where ordinary lubricants fail or aren't even suitable in the first place, our HHS 5000 offers maximum safety during use - a real problem-solver for many applications. Excellent behaviour at high temperatures, extreme creep activity and long-term lubricity meet the most demanding requirements and protect against high wearing damage. As a result, HHS 5000 helps cut repair costs by extending service life and reducing material wearing. The recipe produced from the highest quality, most valuable ingredients guarantees high-end quality.

The proven original formula is primarily characterised by its versatility and reliability. Optimally matched product properties such as high-pressure resistance, adhesive activity and accelerated creep behaviour open up many uses and applications. Often copied, never matched!

HHS Fluid combines the flow properties of an oil with the pressure resistance of a grease. Exactly where a lubricating oil would "run off", and therefore cannot ensure long-lasting lubrication, the high adhesion of the grease characteristic of HHS Fluid comes into play - it lubricates where lubrication is required. It is the best solution for lubricating points with restricted possibilities for relubrication, making it ideal for service and repair work.

HHS Lube - the high-quality adhesive grease from a spray can offers extensive applications for open lubricating points exposed to heavy environmental and weathering influences. It offers minimal dirt adhesion and an outstanding sealing behaviour against moisture and dirt. Highest quality ingredients and unique lubricant technology (OMC2) guarantee reliable use under the most difficult conditions with long-term effectiveness.

For many maintenance and inspection activities, "proof of lubrication" is desired. HHS Grease is the "optimum service partner", as it can be recognised on the lubricating point due to its white pigmentation. Soiling and wearing off of the lubricant are also immediately visible due to the discolouration of the lubricant. That makes it clear when lubrication is required the next time. In addition, it is resistant to weathering and excellently compatible to a broad range of materials.

Especially fast-turning and rotating parts, for example motorcycle chains, are subjected to unusual loads and require a specially developed formula. HHS Drylube is unusually adhesive, and therefore extremely resistant to centrifugal force. Dust and dirt are also no match for this professional lubricant, as the lubricant surface is dry and dirt repellent after flashing off.

At some point all lubricants are used up and heavily soiled. The relubrication of this type of lubricating point is a waste of time and money, as the soiling present has a negative effect on the wear of the lubricating point. For this reason it is vitally important that the lubricating point be pre-cleaned. HHS Clean was developed for effective, thorough cleaning of particularly adhesive lubricant residues and soiling. With the special OMC 2 adhesive additive, the component to be lubricated is optimally prepared and the material surfaces are activated. This further increases the adhesive strength of the HHS products and extends the lubricating intervals.

Applications: Suitable for lubrication with the closest tolerances and high thermal loads, e.g. throttle valve joints, inner bearings, thermally loaded chains and slide rails etc.

Applications: Suitable for universal lubrication and for high pressure loads, e.g. shift, throttle and clutch linkages, Bowden cables, hinges, deflection levers etc.

Applications: Suitable for lubrication with restricted possibilities for relubrication during maintenance and repair work, e.g. inner bearings, wire cables, joints, shafts, antifriction bearings etc.

Applications: Suitable for open lubrication with high exposure to soiling and weathering, e.g. gearwheels, wire cables, chains, spring tensioners etc.

Applications: Suitable for lubrication during maintenance and inspection work, e.g. hinges, door catch straps, joints, slide rails etc.

Applications: Suitable for lubricating fast-turning elements, e.g. chains and machine parts, wire cables etc.

Applications: For pre-treatment of heavily soiled lubricating points, e.g. soiled grease and oil residues, resin, wax etc. Wachs, uvm.

Oil

Contents 500 ml

Fluid grease

Art. No. 0893 106 3

Grease

P. Qty. 6/12 5

Oil

Contents 500 ml 150 ml

Fluid grease

Art. No. 0893 106 0893 106 1

Grease

P. Qty. 6/12/24 12

Oil

Contents 500 ml

Fluid grease

Art. No. 0893 106 4

Grease

P. Qty. 6

Oil

Contents 500 ml

Fluid grease

Art. No. 0893 106 5

Grease

P. Qty. 6

Oil

Contents 400ml

Fluid grease

Grease

Art. No. 0893 106 7

P. Qty. 6/12/24

No viscosity classification Contents 400ml

6

Art. No. 0893 106 6

P. Qty. 6

Contents 500ml

Art. No. 0893 106 10

P. Qty. 12 7


THE WÜRTH HHS ADHESIVE LUBRICANTS AT A GLANCE! High-quality Highly adhesive Safe

Würth SABESTO – the brand for innovative, environmentally friendly chemical service products.

4

HHS 5000

HHS 2000

HHS FLUID

HHS LUBE

HHS GREASE

HHS DRYLUBE

HHS CLEAN

High Performance Fully-Synthetic Creep Oil with PTFE

High-pressure resistant adhesive lubricating oil

Fluid grease resistant to centrifugal force

Dirt-repelling sprayed grease with long-term action and OMC2

White high-performance maintenance grease containing PTFE

High-performance dry synthetic wax resistant to centrifugal force

Highly-effective pre-cleaner with adhesion intensifier

On the safe side!

The Original!

Oil & Grease = Duo-Effect!

Outdoor-Pro!

Everything in view!

Round and round it goes!

Puts an end to grease!

Where ordinary lubricants fail or aren't even suitable in the first place, our HHS 5000 offers maximum safety during use - a real problem-solver for many applications. Excellent behaviour at high temperatures, extreme creep activity and long-term lubricity meet the most demanding requirements and protect against high wearing damage. As a result, HHS 5000 helps cut repair costs by extending service life and reducing material wearing. The recipe produced from the highest quality, most valuable ingredients guarantees high-end quality.

The proven original formula is primarily characterised by its versatility and reliability. Optimally matched product properties such as high-pressure resistance, adhesive activity and accelerated creep behaviour open up many uses and applications. Often copied, never matched!

HHS Fluid combines the flow properties of an oil with the pressure resistance of a grease. Exactly where a lubricating oil would "run off", and therefore cannot ensure long-lasting lubrication, the high adhesion of the grease characteristic of HHS Fluid comes into play - it lubricates where lubrication is required. It is the best solution for lubricating points with restricted possibilities for relubrication, making it ideal for service and repair work.

HHS Lube - the high-quality adhesive grease from a spray can offers extensive applications for open lubricating points exposed to heavy environmental and weathering influences. It offers minimal dirt adhesion and an outstanding sealing behaviour against moisture and dirt. Highest quality ingredients and unique lubricant technology (OMC2) guarantee reliable use under the most difficult conditions with long-term effectiveness.

For many maintenance and inspection activities, "proof of lubrication" is desired. HHS Grease is the "optimum service partner", as it can be recognised on the lubricating point due to its white pigmentation. Soiling and wearing off of the lubricant are also immediately visible due to the discolouration of the lubricant. That makes it clear when lubrication is required the next time. In addition, it is resistant to weathering and excellently compatible to a broad range of materials.

Especially fast-turning and rotating parts, for example motorcycle chains, are subjected to unusual loads and require a specially developed formula. HHS Drylube is unusually adhesive, and therefore extremely resistant to centrifugal force. Dust and dirt are also no match for this professional lubricant, as the lubricant surface is dry and dirt repellent after flashing off.

At some point all lubricants are used up and heavily soiled. The relubrication of this type of lubricating point is a waste of time and money, as the soiling present has a negative effect on the wear of the lubricating point. For this reason it is vitally important that the lubricating point be pre-cleaned. HHS Clean was developed for effective, thorough cleaning of particularly adhesive lubricant residues and soiling. With the special OMC 2 adhesive additive, the component to be lubricated is optimally prepared and the material surfaces are activated. This further increases the adhesive strength of the HHS products and extends the lubricating intervals.

Applications: Suitable for lubrication with the closest tolerances and high thermal loads, e.g. throttle valve joints, inner bearings, thermally loaded chains and slide rails etc.

Applications: Suitable for universal lubrication and for high pressure loads, e.g. shift, throttle and clutch linkages, Bowden cables, hinges, deflection levers etc.

Applications: Suitable for lubrication with restricted possibilities for relubrication during maintenance and repair work, e.g. inner bearings, wire cables, joints, shafts, antifriction bearings etc.

Applications: Suitable for open lubrication with high exposure to soiling and weathering, e.g. gearwheels, wire cables, chains, spring tensioners etc.

Applications: Suitable for lubrication during maintenance and inspection work, e.g. hinges, door catch straps, joints, slide rails etc.

Applications: Suitable for lubricating fast-turning elements, e.g. chains and machine parts, wire cables etc.

Applications: For pre-treatment of heavily soiled lubricating points, e.g. soiled grease and oil residues, resin, wax etc. Wachs, uvm.

Oil

Contents 500 ml

Fluid grease

Art. No. 0893 106 3

Grease

P. Qty. 6/12 5

Oil

Contents 500 ml 150 ml

Fluid grease

Art. No. 0893 106 0893 106 1

Grease

P. Qty. 6/12/24 12

Oil

Contents 500 ml

Fluid grease

Art. No. 0893 106 4

Grease

P. Qty. 6

Oil

Contents 500 ml

Fluid grease

Art. No. 0893 106 5

Grease

P. Qty. 6

Oil

Contents 400ml

Fluid grease

Grease

Art. No. 0893 106 7

P. Qty. 6/12/24

No viscosity classification Contents 400ml

6

Art. No. 0893 106 6

P. Qty. 6

Contents 500ml

Art. No. 0893 106 10

P. Qty. 12 7


THE WÜRTH HHS ADHESIVE LUBRICANTS AT A GLANCE! High-quality Highly adhesive Safe

Würth SABESTO – the brand for innovative, environmentally friendly chemical service products.

4

HHS 5000

HHS 2000

HHS FLUID

HHS LUBE

HHS GREASE

HHS DRYLUBE

HHS CLEAN

High Performance Fully-Synthetic Creep Oil with PTFE

High-pressure resistant adhesive lubricating oil

Fluid grease resistant to centrifugal force

Dirt-repelling sprayed grease with long-term action and OMC2

White high-performance maintenance grease containing PTFE

High-performance dry synthetic wax resistant to centrifugal force

Highly-effective pre-cleaner with adhesion intensifier

On the safe side!

The Original!

Oil & Grease = Duo-Effect!

Outdoor-Pro!

Everything in view!

Round and round it goes!

Puts an end to grease!

Where ordinary lubricants fail or aren't even suitable in the first place, our HHS 5000 offers maximum safety during use - a real problem-solver for many applications. Excellent behaviour at high temperatures, extreme creep activity and long-term lubricity meet the most demanding requirements and protect against high wearing damage. As a result, HHS 5000 helps cut repair costs by extending service life and reducing material wearing. The recipe produced from the highest quality, most valuable ingredients guarantees high-end quality.

The proven original formula is primarily characterised by its versatility and reliability. Optimally matched product properties such as high-pressure resistance, adhesive activity and accelerated creep behaviour open up many uses and applications. Often copied, never matched!

HHS Fluid combines the flow properties of an oil with the pressure resistance of a grease. Exactly where a lubricating oil would "run off", and therefore cannot ensure long-lasting lubrication, the high adhesion of the grease characteristic of HHS Fluid comes into play - it lubricates where lubrication is required. It is the best solution for lubricating points with restricted possibilities for relubrication, making it ideal for service and repair work.

HHS Lube - the high-quality adhesive grease from a spray can offers extensive applications for open lubricating points exposed to heavy environmental and weathering influences. It offers minimal dirt adhesion and an outstanding sealing behaviour against moisture and dirt. Highest quality ingredients and unique lubricant technology (OMC2) guarantee reliable use under the most difficult conditions with long-term effectiveness.

For many maintenance and inspection activities, "proof of lubrication" is desired. HHS Grease is the "optimum service partner", as it can be recognised on the lubricating point due to its white pigmentation. Soiling and wearing off of the lubricant are also immediately visible due to the discolouration of the lubricant. That makes it clear when lubrication is required the next time. In addition, it is resistant to weathering and excellently compatible to a broad range of materials.

Especially fast-turning and rotating parts, for example motorcycle chains, are subjected to unusual loads and require a specially developed formula. HHS Drylube is unusually adhesive, and therefore extremely resistant to centrifugal force. Dust and dirt are also no match for this professional lubricant, as the lubricant surface is dry and dirt repellent after flashing off.

At some point all lubricants are used up and heavily soiled. The relubrication of this type of lubricating point is a waste of time and money, as the soiling present has a negative effect on the wear of the lubricating point. For this reason it is vitally important that the lubricating point be pre-cleaned. HHS Clean was developed for effective, thorough cleaning of particularly adhesive lubricant residues and soiling. With the special OMC 2 adhesive additive, the component to be lubricated is optimally prepared and the material surfaces are activated. This further increases the adhesive strength of the HHS products and extends the lubricating intervals.

Applications: Suitable for lubrication with the closest tolerances and high thermal loads, e.g. throttle valve joints, inner bearings, thermally loaded chains and slide rails etc.

Applications: Suitable for universal lubrication and for high pressure loads, e.g. shift, throttle and clutch linkages, Bowden cables, hinges, deflection levers etc.

Applications: Suitable for lubrication with restricted possibilities for relubrication during maintenance and repair work, e.g. inner bearings, wire cables, joints, shafts, antifriction bearings etc.

Applications: Suitable for open lubrication with high exposure to soiling and weathering, e.g. gearwheels, wire cables, chains, spring tensioners etc.

Applications: Suitable for lubrication during maintenance and inspection work, e.g. hinges, door catch straps, joints, slide rails etc.

Applications: Suitable for lubricating fast-turning elements, e.g. chains and machine parts, wire cables etc.

Applications: For pre-treatment of heavily soiled lubricating points, e.g. soiled grease and oil residues, resin, wax etc. Wachs, uvm.

Oil

Contents 500 ml

Fluid grease

Art. No. 0893 106 3

Grease

P. Qty. 6/12 5

Oil

Contents 500 ml 150 ml

Fluid grease

Art. No. 0893 106 0893 106 1

Grease

P. Qty. 6/12/24 12

Oil

Contents 500 ml

Fluid grease

Art. No. 0893 106 4

Grease

P. Qty. 6

Oil

Contents 500 ml

Fluid grease

Art. No. 0893 106 5

Grease

P. Qty. 6

Oil

Contents 400ml

Fluid grease

Grease

Art. No. 0893 106 7

P. Qty. 6/12/24

No viscosity classification Contents 400ml

6

Art. No. 0893 106 6

P. Qty. 6

Contents 500ml

Art. No. 0893 106 10

P. Qty. 12 7


THE WÜRTH HHS ADHESIVE LUBRICANTS AT A GLANCE! High-quality Highly adhesive Safe

Würth SABESTO – the brand for innovative, environmentally friendly chemical service products.

4

HHS 5000

HHS 2000

HHS FLUID

HHS LUBE

HHS GREASE

HHS DRYLUBE

HHS CLEAN

High Performance Fully-Synthetic Creep Oil with PTFE

High-pressure resistant adhesive lubricating oil

Fluid grease resistant to centrifugal force

Dirt-repelling sprayed grease with long-term action and OMC2

White high-performance maintenance grease containing PTFE

High-performance dry synthetic wax resistant to centrifugal force

Highly-effective pre-cleaner with adhesion intensifier

On the safe side!

The Original!

Oil & Grease = Duo-Effect!

Outdoor-Pro!

Everything in view!

Round and round it goes!

Puts an end to grease!

Where ordinary lubricants fail or aren't even suitable in the first place, our HHS 5000 offers maximum safety during use - a real problem-solver for many applications. Excellent behaviour at high temperatures, extreme creep activity and long-term lubricity meet the most demanding requirements and protect against high wearing damage. As a result, HHS 5000 helps cut repair costs by extending service life and reducing material wearing. The recipe produced from the highest quality, most valuable ingredients guarantees high-end quality.

The proven original formula is primarily characterised by its versatility and reliability. Optimally matched product properties such as high-pressure resistance, adhesive activity and accelerated creep behaviour open up many uses and applications. Often copied, never matched!

HHS Fluid combines the flow properties of an oil with the pressure resistance of a grease. Exactly where a lubricating oil would "run off", and therefore cannot ensure long-lasting lubrication, the high adhesion of the grease characteristic of HHS Fluid comes into play - it lubricates where lubrication is required. It is the best solution for lubricating points with restricted possibilities for relubrication, making it ideal for service and repair work.

HHS Lube - the high-quality adhesive grease from a spray can offers extensive applications for open lubricating points exposed to heavy environmental and weathering influences. It offers minimal dirt adhesion and an outstanding sealing behaviour against moisture and dirt. Highest quality ingredients and unique lubricant technology (OMC2) guarantee reliable use under the most difficult conditions with long-term effectiveness.

For many maintenance and inspection activities, "proof of lubrication" is desired. HHS Grease is the "optimum service partner", as it can be recognised on the lubricating point due to its white pigmentation. Soiling and wearing off of the lubricant are also immediately visible due to the discolouration of the lubricant. That makes it clear when lubrication is required the next time. In addition, it is resistant to weathering and excellently compatible to a broad range of materials.

Especially fast-turning and rotating parts, for example motorcycle chains, are subjected to unusual loads and require a specially developed formula. HHS Drylube is unusually adhesive, and therefore extremely resistant to centrifugal force. Dust and dirt are also no match for this professional lubricant, as the lubricant surface is dry and dirt repellent after flashing off.

At some point all lubricants are used up and heavily soiled. The relubrication of this type of lubricating point is a waste of time and money, as the soiling present has a negative effect on the wear of the lubricating point. For this reason it is vitally important that the lubricating point be pre-cleaned. HHS Clean was developed for effective, thorough cleaning of particularly adhesive lubricant residues and soiling. With the special OMC 2 adhesive additive, the component to be lubricated is optimally prepared and the material surfaces are activated. This further increases the adhesive strength of the HHS products and extends the lubricating intervals.

Applications: Suitable for lubrication with the closest tolerances and high thermal loads, e.g. throttle valve joints, inner bearings, thermally loaded chains and slide rails etc.

Applications: Suitable for universal lubrication and for high pressure loads, e.g. shift, throttle and clutch linkages, Bowden cables, hinges, deflection levers etc.

Applications: Suitable for lubrication with restricted possibilities for relubrication during maintenance and repair work, e.g. inner bearings, wire cables, joints, shafts, antifriction bearings etc.

Applications: Suitable for open lubrication with high exposure to soiling and weathering, e.g. gearwheels, wire cables, chains, spring tensioners etc.

Applications: Suitable for lubrication during maintenance and inspection work, e.g. hinges, door catch straps, joints, slide rails etc.

Applications: Suitable for lubricating fast-turning elements, e.g. chains and machine parts, wire cables etc.

Applications: For pre-treatment of heavily soiled lubricating points, e.g. soiled grease and oil residues, resin, wax etc. Wachs, uvm.

Oil

Contents 500 ml

Fluid grease

Art. No. 0893 106 3

Grease

P. Qty. 6/12 5

Oil

Contents 500 ml 150 ml

Fluid grease

Art. No. 0893 106 0893 106 1

Grease

P. Qty. 6/12/24 12

Oil

Contents 500 ml

Fluid grease

Art. No. 0893 106 4

Grease

P. Qty. 6

Oil

Contents 500 ml

Fluid grease

Art. No. 0893 106 5

Grease

P. Qty. 6

Oil

Contents 400ml

Fluid grease

Grease

Art. No. 0893 106 7

P. Qty. 6/12/24

No viscosity classification Contents 400ml

6

Art. No. 0893 106 6

P. Qty. 6

Contents 500ml

Art. No. 0893 106 10

P. Qty. 12 7


Product properties matched to the application requirements:

Würth SABESTO - the brand for innovative, environmentally friendly chemical service products.

Product Properties Thermal stability

Corrosion protection

Adhesive

Long live

Material compatibility

Dirt repellent

PTFE

HHS 2000

none

HHS FLUID

none

HHS LUBE

OMC 2

HHS GREASE

We have utilised the principles of tribology* as the basis for the development of the new range of adhesive lubricants (see graphic). A self-contained, synchronised, innovative lubricant concept was developed - the new HHS product line.

Solid lubricant

HHS 5000

TR

Performance Reliability

excellent good acceptable

ADHESIVE LUBRICANTS

Lu

Creep capacity

High-pressure resistance

is

Thermal stability

Corrosion protection

Adhesive

Long live

Material compatibility

Dirt repellent

Open steel gearwheels

b ric a t i o n

st

ti m

Requirements for Application

s

Efficiency Op

Application

HHS

n r

PTFE + wax

IBO LO GIE ea W

PTFE

HHS DRYLUBE

They keep things running smoothly!

em

High-pressure resistance

t io

Creep capacity

Fric

Product

HHS ADHESIVE LUBRICANTS

Reduce costs with the right lubricant technology

at

io n

o f m e c h a nic

al

sy

Due to the large number of applications and the different lubricant requirements, the right product selection is of primary importance. Here the following four factors must be taken into account before selecting a lubricant:

Closed steel gearwheels Toothed racks Plastic gearwheels

• Design influences of the lubricating point • Loads on the lubricating point • Types and speeds of movements • Environmental influences

Fast-running chains Thermally loaded chains Guided wire cables

To cover as many areas and needs as possible, particular attention was paid to the viscosity and consistency of the products. The new HHS adhesive lubricant system therefore covers all major viscosity and consistency ranges - from oily and highly creep-active to greasy and highly adhesion-active. Combined with the intelligent, high-quality, matched addition of additives and the use of top-quality ingredients, we guarantee you professional lubricant management with minimal wear and high lubricant reliability. The new HHS system offers a broad range of advantages:

Fast-running wire cables Slide rails/Anti-friction bearings Hinges/Joints Anti-friction bearings Door brakes/Door catch straps

• Maintenance and service costs are reduced. • Lubricating intervals are extended. • Energy is saved by reduced friction. • Wear is minimized by high product quality. • Complete lubricant system for a wide range of applications.

Storage/Preservation Bowden cables Shift, throttle and clutch linkages

Adolf Würth GmbH & Co. KG 74650 Künzelsau, Germany Telefon +49 (0 79 40) 15 - 0 Telefax +49 (0 79 40) 15 -10 00 www.wuerth.com info@wuerth.com

The intelligent lubricant system Product

© by Adolf Würth GmbH & Co. KG Printed in Germany. All rights reserved.

HHS 5000

HHS 2000

HHS FLUID

HHS LUBE

HHS GREASE

HHS DRYLUBE

Lubricant type

High Performance creep oil with PTFE

High-pressure resistant adhesive lubricating oil

Fluid grease resistant to centrifugal force

Dirt-repelling sprayed grease with long-term action and OMC2

White high performance maintenance grease containing PTFE

High Performance dry lubricant resistant to centrifugal force

Base oil/ saponification type

Fully-synthetic oil

High-quality mineral oil + lithium soap

High-quality mineral oil + lithium soap

Synthetic wax

Responsible for the content: PFC Dept. / Süleyman Kozak VSDA Dept. / Karin Fromm Final editing: MWV Dept. / Regina Schäfer Reprinting, wholly or in part, only with permission. MWV - GRAFIS - Delp - 3’ - 03/06 Printed on environmentally friendly paper.

Solid lubricants

We reserve the right to make product changes at any time without prior notice for the purpose of quality improvement. Illustrations may be example illustrations which can differ in their appearance from the products delivered. Errors excepted. We assume no liability for printing errors. Our General Terms and Conditions apply.

Colour

Spring struts very important requirement for the application important requirement for the application less important requirement for the application

For all applications, pre-cleaning of the point to be lubricated with our HHS CLEAN, Art. No. 0893 106 10 is recommended. Due to the new combination of raw materials, the surface is pre-treated for long-term lubrication. Soiled lubricating points are one of the most frequent causes of damage.

This information is intended for informational purposes only, based on our own experience. Preliminary tests are required.

3

* Tribology (definition according to DIN 50323) is the science and technology of interacting surfaces in relative movement. It comprises the entire field of friction and wear, including lubrication and includes corresponding interface interactions, both between solid bodies and between solid bodies and liquids or gases.

Würth UK Ltd · 1 Centurion Way · Erith · Kent · DA18 4AE · Tele – 0870 5987841 · web- www.wurth.co.uk 8

Partially-synthetic Partially-synthetic oil oil + grease

PTFE

none

none

OMC 2

PTFE

PTFE + wax

transparent

yellowish

yellowish

opal green

bright white

yellowish

-20°C 200°C

-35 °C 180°C

-25°C 170°C

-25°C 150 °C

-15 °C 130 °C

-30 °C 100 °C

Aerosol, 500 ml

Aerosol, 500 ml

Aerosol, 500 ml

Aerosol, 500 ml

Aerosol, 400 ml

Aerosol, 400 ml

Temperature Lower operating temperature range Upper operating temperature range

Container size 2


Product properties matched to the application requirements:

Würth SABESTO - the brand for innovative, environmentally friendly chemical service products.

Product Properties Thermal stability

Corrosion protection

Adhesive

Long live

Material compatibility

Dirt repellent

PTFE

HHS 2000

none

HHS FLUID

none

HHS LUBE

OMC 2

HHS GREASE

We have utilised the principles of tribology* as the basis for the development of the new range of adhesive lubricants (see graphic). A self-contained, synchronised, innovative lubricant concept was developed - the new HHS product line.

Solid lubricant

HHS 5000

TR

Performance Reliability

excellent good acceptable

ADHESIVE LUBRICANTS

Lu

Creep capacity

High-pressure resistance

is

Thermal stability

Corrosion protection

Adhesive

Long live

Material compatibility

Dirt repellent

Open steel gearwheels

b ric a t i o n

st

ti m

Requirements for Application

s

Efficiency Op

Application

HHS

n r

PTFE + wax

IBO LO GIE ea W

PTFE

HHS DRYLUBE

They keep things running smoothly!

em

High-pressure resistance

t io

Creep capacity

Fric

Product

HHS ADHESIVE LUBRICANTS

Reduce costs with the right lubricant technology

at

io n

o f m e c h a nic

al

sy

Due to the large number of applications and the different lubricant requirements, the right product selection is of primary importance. Here the following four factors must be taken into account before selecting a lubricant:

Closed steel gearwheels Toothed racks Plastic gearwheels

• Design influences of the lubricating point • Loads on the lubricating point • Types and speeds of movements • Environmental influences

Fast-running chains Thermally loaded chains Guided wire cables

To cover as many areas and needs as possible, particular attention was paid to the viscosity and consistency of the products. The new HHS adhesive lubricant system therefore covers all major viscosity and consistency ranges - from oily and highly creep-active to greasy and highly adhesion-active. Combined with the intelligent, high-quality, matched addition of additives and the use of top-quality ingredients, we guarantee you professional lubricant management with minimal wear and high lubricant reliability. The new HHS system offers a broad range of advantages:

Fast-running wire cables Slide rails/Anti-friction bearings Hinges/Joints Anti-friction bearings Door brakes/Door catch straps

• Maintenance and service costs are reduced. • Lubricating intervals are extended. • Energy is saved by reduced friction. • Wear is minimized by high product quality. • Complete lubricant system for a wide range of applications.

Storage/Preservation Bowden cables Shift, throttle and clutch linkages

Adolf Würth GmbH & Co. KG 74650 Künzelsau, Germany Telefon +49 (0 79 40) 15 - 0 Telefax +49 (0 79 40) 15 -10 00 www.wuerth.com info@wuerth.com

The intelligent lubricant system Product

© by Adolf Würth GmbH & Co. KG Printed in Germany. All rights reserved.

HHS 5000

HHS 2000

HHS FLUID

HHS LUBE

HHS GREASE

HHS DRYLUBE

Lubricant type

High Performance creep oil with PTFE

High-pressure resistant adhesive lubricating oil

Fluid grease resistant to centrifugal force

Dirt-repelling sprayed grease with long-term action and OMC2

White high performance maintenance grease containing PTFE

High Performance dry lubricant resistant to centrifugal force

Base oil/ saponification type

Fully-synthetic oil

High-quality mineral oil + lithium soap

High-quality mineral oil + lithium soap

Synthetic wax

Responsible for the content: PFC Dept. / Süleyman Kozak VSDA Dept. / Karin Fromm Final editing: MWV Dept. / Regina Schäfer Reprinting, wholly or in part, only with permission. MWV - GRAFIS - Delp - 3’ - 03/06 Printed on environmentally friendly paper.

Solid lubricants

We reserve the right to make product changes at any time without prior notice for the purpose of quality improvement. Illustrations may be example illustrations which can differ in their appearance from the products delivered. Errors excepted. We assume no liability for printing errors. Our General Terms and Conditions apply.

Colour

Spring struts very important requirement for the application important requirement for the application less important requirement for the application

For all applications, pre-cleaning of the point to be lubricated with our HHS CLEAN, Art. No. 0893 106 10 is recommended. Due to the new combination of raw materials, the surface is pre-treated for long-term lubrication. Soiled lubricating points are one of the most frequent causes of damage.

This information is intended for informational purposes only, based on our own experience. Preliminary tests are required.

3

* Tribology (definition according to DIN 50323) is the science and technology of interacting surfaces in relative movement. It comprises the entire field of friction and wear, including lubrication and includes corresponding interface interactions, both between solid bodies and between solid bodies and liquids or gases.

Würth UK Ltd · 1 Centurion Way · Erith · Kent · DA18 4AE · Tele – 0870 5987841 · web- www.wurth.co.uk 8

Partially-synthetic Partially-synthetic oil oil + grease

PTFE

none

none

OMC 2

PTFE

PTFE + wax

transparent

yellowish

yellowish

opal green

bright white

yellowish

-20°C 200°C

-35 °C 180°C

-25°C 170°C

-25°C 150 °C

-15 °C 130 °C

-30 °C 100 °C

Aerosol, 500 ml

Aerosol, 500 ml

Aerosol, 500 ml

Aerosol, 500 ml

Aerosol, 400 ml

Aerosol, 400 ml

Temperature Lower operating temperature range Upper operating temperature range

Container size 2


Product properties matched to the application requirements:

Würth SABESTO - the brand for innovative, environmentally friendly chemical service products.

Product Properties Thermal stability

Corrosion protection

Adhesive

Long live

Material compatibility

Dirt repellent

PTFE

HHS 2000

none

HHS FLUID

none

HHS LUBE

OMC 2

HHS GREASE

We have utilised the principles of tribology* as the basis for the development of the new range of adhesive lubricants (see graphic). A self-contained, synchronised, innovative lubricant concept was developed - the new HHS product line.

Solid lubricant

HHS 5000

TR

Performance Reliability

excellent good acceptable

ADHESIVE LUBRICANTS

Lu

Creep capacity

High-pressure resistance

is

Thermal stability

Corrosion protection

Adhesive

Long live

Material compatibility

Dirt repellent

Open steel gearwheels

b ric a t i o n

st

ti m

Requirements for Application

s

Efficiency Op

Application

HHS

n r

PTFE + wax

IBO LO GIE ea W

PTFE

HHS DRYLUBE

They keep things running smoothly!

em

High-pressure resistance

t io

Creep capacity

Fric

Product

HHS ADHESIVE LUBRICANTS

Reduce costs with the right lubricant technology

at

io n

o f m e c h a nic

al

sy

Due to the large number of applications and the different lubricant requirements, the right product selection is of primary importance. Here the following four factors must be taken into account before selecting a lubricant:

Closed steel gearwheels Toothed racks Plastic gearwheels

• Design influences of the lubricating point • Loads on the lubricating point • Types and speeds of movements • Environmental influences

Fast-running chains Thermally loaded chains Guided wire cables

To cover as many areas and needs as possible, particular attention was paid to the viscosity and consistency of the products. The new HHS adhesive lubricant system therefore covers all major viscosity and consistency ranges - from oily and highly creep-active to greasy and highly adhesion-active. Combined with the intelligent, high-quality, matched addition of additives and the use of top-quality ingredients, we guarantee you professional lubricant management with minimal wear and high lubricant reliability. The new HHS system offers a broad range of advantages:

Fast-running wire cables Slide rails/Anti-friction bearings Hinges/Joints Anti-friction bearings Door brakes/Door catch straps

• Maintenance and service costs are reduced. • Lubricating intervals are extended. • Energy is saved by reduced friction. • Wear is minimized by high product quality. • Complete lubricant system for a wide range of applications.

Storage/Preservation Bowden cables Shift, throttle and clutch linkages

Adolf Würth GmbH & Co. KG 74650 Künzelsau, Germany Telefon +49 (0 79 40) 15 - 0 Telefax +49 (0 79 40) 15 -10 00 www.wuerth.com info@wuerth.com

The intelligent lubricant system Product

© by Adolf Würth GmbH & Co. KG Printed in Germany. All rights reserved.

HHS 5000

HHS 2000

HHS FLUID

HHS LUBE

HHS GREASE

HHS DRYLUBE

Lubricant type

High Performance creep oil with PTFE

High-pressure resistant adhesive lubricating oil

Fluid grease resistant to centrifugal force

Dirt-repelling sprayed grease with long-term action and OMC2

White high performance maintenance grease containing PTFE

High Performance dry lubricant resistant to centrifugal force

Base oil/ saponification type

Fully-synthetic oil

High-quality mineral oil + lithium soap

High-quality mineral oil + lithium soap

Synthetic wax

Responsible for the content: PFC Dept. / Süleyman Kozak VSDA Dept. / Karin Fromm Final editing: MWV Dept. / Regina Schäfer Reprinting, wholly or in part, only with permission. MWV - GRAFIS - Delp - 3’ - 03/06 Printed on environmentally friendly paper.

Solid lubricants

We reserve the right to make product changes at any time without prior notice for the purpose of quality improvement. Illustrations may be example illustrations which can differ in their appearance from the products delivered. Errors excepted. We assume no liability for printing errors. Our General Terms and Conditions apply.

Colour

Spring struts very important requirement for the application important requirement for the application less important requirement for the application

For all applications, pre-cleaning of the point to be lubricated with our HHS CLEAN, Art. No. 0893 106 10 is recommended. Due to the new combination of raw materials, the surface is pre-treated for long-term lubrication. Soiled lubricating points are one of the most frequent causes of damage.

This information is intended for informational purposes only, based on our own experience. Preliminary tests are required.

3

* Tribology (definition according to DIN 50323) is the science and technology of interacting surfaces in relative movement. It comprises the entire field of friction and wear, including lubrication and includes corresponding interface interactions, both between solid bodies and between solid bodies and liquids or gases.

Würth UK Ltd · 1 Centurion Way · Erith · Kent · DA18 4AE · Tele – 0870 5987841 · web- www.wurth.co.uk 8

Partially-synthetic Partially-synthetic oil oil + grease

PTFE

none

none

OMC 2

PTFE

PTFE + wax

transparent

yellowish

yellowish

opal green

bright white

yellowish

-20°C 200°C

-35 °C 180°C

-25°C 170°C

-25°C 150 °C

-15 °C 130 °C

-30 °C 100 °C

Aerosol, 500 ml

Aerosol, 500 ml

Aerosol, 500 ml

Aerosol, 500 ml

Aerosol, 400 ml

Aerosol, 400 ml

Temperature Lower operating temperature range Upper operating temperature range

Container size 2


HHS Adhesive Lubricants