Issuu on Google+

01 - How to make doll making and image building plan

BJD structure has become as follows. parts are supported by two pairs of rubber. What is the basic structure in the same doll. A detailed structure of the joints on the "sphere" that Takashi Seki to section. The structure of the doll, for now the image is fine if you can somehow about. Consider the image of the doll to make in the next. It is also good for the image goes up while playing with clay Utsurotsu will have fun making faces can make it just because. Draw and I firmly believe the image that pops into your face in your head angle and suddenly the painting kept in a hurry and before the image is uncertain. The courses are designed to make girls like this I think I try to do. Here are the steps when creating a plan from the image. My picture is so much上手Kunai when actually drawing the human body drawings , art-friendly Anatomy Please refer to the other.

I thought the Japanese girl Na make something like this, Try to draw fall. This course is not a girl, so cases..

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonés a inglés con Google. Coprolito@gmail.com


Based on the image and try to draw a side view and front view of two straight lines drawn on paper. Burly shoulders with something ... The shoulder or to your liking.

As a side draw a straight line from neck to ankle. Then when they made you become independent. Please note that the body is a bow. This is the percent who are firmly drawn, Kanaku also plan to make this. How to cause a front view of the plan is written bid to draw level at the bottom.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


This child seems to be about 5.5 head and body. What about 10 years old. Cute looks set to more realistic human head and body headed more. Basically, the infant is 4 to 5 head and body, girls, boys head and body 5.5 to 6.5, Adult is 7 to 7.5 is made in the head and body.

Shoulder width is determined from the waist. Waist is not that weird wide. I get more adult shoulders. An inverted triangle and looks even more if the man and the body.

Position of the elbow is above the navel.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Wrist position is the middle office to go out from the sides of the pelvis and leg bones. This child is a little shorter. Dolls with long legs is the leg around the bottom line of the ball of the wrist. Some individual differences for this area, I think I can not comb a little superhuman Sasetakattara long.

Try a straight line down the center of the thigh. This line does not fit around the knee. Draw knees to get inside. From the center of the center of the ankle is connected by a straight knee.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


I like this drawing of the flow in short. When compared to the knee and ankle to knee leg, I drew a little longer so that people from the knee to the ankle.

The length of the foot that affect the entire image, I decided like this. Measure the length from the heel to the first leg ...

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Bring it on the crotch line. Between the eyes and nose have been around on the line. I think a balance would work a lot with this doll. Too real, I feel that the long legs can Poku doll.

I tried to figure the standard of length. If you have different arrangement of the face and draw other people, and I and a guideline only.

This will draw on actual basis. This is an area to bring the nose down on the length of the leg. So much for real man. I think so much better if a real doll.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


This will bring around the eyebrows and on the length of the leg. The legs are long. This doll-style anime characters that looks like this chick. We just moved the leg is actually changing the position of the knee This becomes a necessary minor adjustments such as changing the length of the hand.

It is a side view, draw the neck I'm supposed to be aware of the angle.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


The center line of the shoulder and side of the center line does not fit. I slipped back feeling a little drawing.

If you like this ... the center line Rino Tooru I think the point of the body to draw a little bow.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


The position of the navel, and I arranged to be suitably isosceles triangles. Will be on too much too strange.

The size of the hand, to the eye about the size of the chin. Be the feet of this length toes. Also vary by age.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Inserting the ball. (Front view is actually place the ball with a symmetrical inverted) Become too large to set the line extends from the body and give care. The lower portion of the sphere is in contact with the receiving, Aware that the wide range of motion. For example, such as the thigh, the ball is flooded Renaku that much. Can not, or inward or outward into the sphere shoulders too. Neck joint is free to try to draw in front of first Slightly larger than the thickness of the neck long. Bring it to the side, but make sense if someone is okay. Once that ball from a small neck at Oita brought to the side, then Or modified to fit the neck of a side line ball, More fat we have to front elevation of the head. The most trouble is the size of the ball at the knees. It is difficult to make up for the lighter side of the knee much too large, Thick and unnatural to the side of the knee is too small Also please take more range of motion. This side also said it would cut more of the knee, please try to make a lot. The sphere is the diameter of each part, if my shoulder ball-ball knee Sphere around the ankle has become ≒ elbow ball. The side view also places the center of the sphere is a straight line of the knee ankle ball → → → femoral ball head ball. Since the height of the ball in a fixed front view, put the ball in the side view is a breeze.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonés a inglés con Google. Coprolito@gmail.com


Bonus. Japanese girl is a doll I made. 7 head and body weakness. The length of the leg is between the eyes and nose around how to measure the cases. The long arm is deliberately because they are so noticeable the longer the arm sleeve. Was not sure what turn out as expected.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


f you make on a PC, do the following in layers in photoshop multiplication. • If only the front view depicting Kuttsukemasu to trace the flip side of the front view of a computer could capture a picture. Try printing is now a front view Tara. A4 Please adjust the position of A4 print in half lengthwise so that the. A4 to draw it to watermark the copy of graph paper, draw a side view causes asleep while watching the front view. Together with the front elevation to scan it again and put on ball handling and photoshop. • If you drew a front view and side view as an example to reverse Kuttsukemasu <BR> trace the side of the front view of a computer could capture a picture. Then put in the ball handling and photoshop. Next, place the ball in the same height as the front view side view as well. Would make sense since it can not correspond with the front and side, then cut and pasted and modified on a PC. Print to any size Then something made. If not fit to print after print enlargements as large as is possible) If your computer is not actually draw, sketch books and look at the human body directly depict to scale on graph paper. A4 Not have to be to scale, A4 enough to draw, I × enlargements also greatly enlarged copies. (Recommended for those over there so easy to draw) The course plan is to make a doll like this. I like the image of a body Dollfie. Dolphy is drawn like that, so I think I have almost shoulder to the center line. The large size of the page of drawings available. Although the blueprint stage or even making subtle changes, which will be fundamental.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonés a inglés con Google. Coprolito@gmail.com


02 How to make a doll - cutting polystyrene Then, as shave foam core. BJD, and ensure through a hollow rubber has become hollow in the sense of weight. Modeling clay and wrapped the core, core work is needed to pull it later. The core is the basis for the foundation, people will make the hard right. Little distortion and will come out of the core stage Savory.

Kina Hiroshi foam core is used. You can also use Styrofoam plates with adhesive stuck to the other thin styrene. You may want to take the rest came into the styrofoam packing.

Prepare a drawing. This page blueprint is improved to a girl. What you have to print up to fit A4, and copied the expanded 189 percent. (Approx. h 60cm) Part of the hand and foot are summarized in Appendix.

From drawing, determine the size of the cut wire. I need tracing paper (advertising back in the picture) to prepare, Takes about 5 mm inside the line drawn from the outline of the drawing. This margin is the thickness of the clay. Torso so it is symmetrical, only half Shimasu.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Make a copy of the mark where the center line of just half. Fold in half from there.

Still folded in half and cut. Will be open during this symmetry.

About 5 mm from the inner edge, the Remashita symmetrical pattern. Please cut out the extra joints. This is part of the extra holes into the joints later. Oke made it this way at the core, eliminating the hassle drilling later. Also, keep pulling the ball over the crossbar signed left and right shoulder joint. Side of the fuselage as well, leave as a marker to draw a horizontal line of the same height.

Create a pattern on the face as well. Draw a horizontal line is tied on the eyes.

Also creates a profile pattern. The profile, in case you come out of styrene foam plastic with a facial Egutta make some form of the front. I'll Draw a horizontal line at the height of the profile pattern on the eyes.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


This pattern has become of the arm. Make a copy of the elbow line.

This pattern has become the foot. Horizontal and the knee, leave a vertical line parallel to the centerline of the fuselage.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


。 Likely sites patterns. 。 Pattern of the arms and legs are good only one I can use to reverse the sides.

Place the Styrofoam pattern. At this time, so that the guidelines are drawn parallel to the vertical sides of the foam, Paste the measure with a ruler while. The guidelines also be parallel to the side.

To fit the height of front and side of the pattern, Adjust the height of both the same height as I've drawn horizontal lines.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonés a inglés con Google. Coprolito@gmail.com


Guidelines, according to the maximum draw a line cut.

Polystyrene Cutter Electronics The cut out. Can I use the saw.

Began. Flip the pattern on the side, leave a copy on the other side edge.

Polystyrene cutter cut out from the side electricity. The contour of the sides, while mindful both fine, cut out in parallel.

切I cut.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonés a inglés con Google. Coprolito@gmail.com


Ri Shitara, Shimasu the pattern on the front. Good luck because it is hard to duplicate Shimasu not flat. Shimasu as the front and back.

While careful to cut out parallel to the front and back as when the side.

Next, cut off by the cutter angular part styrene.

I cut off briefly.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


More detailed part serrated.We will cut back on. Impossible, so much dirt flying, on the trash 削Rimashou. Stripping careful angular feel like leaving.

After shaving, anti-static spray Sprayed. It is easy to fall away because of the waste polystyrene and then flashed.

Core cut face.

Seen from below. At this stage, verify that is a symmetrical face and back of the head.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonés a inglés con Google. Coprolito@gmail.com


Cut out the body as well.

Polystyrene cutter cut electricity use. If yours is stuck in line at an angle to cut a little like a photograph.

。 A large portion can be neatly cut with a saw that picture.

Like when they made the core of the face, we'll cut out the side.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonés a inglés con Google. Coprolito@gmail.com


Ri Shitara, Shimasu the outline of the front.

Off when the front portion of the shoulder and leaves it like this.

I cut.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Polystyrene cutter angle drops.

Then, drop the angle toward the midline of the body further.

Aspects, drops toward the center line of the side corners.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Was able to drop a new angle. All the rounded corners in this manner.

I dropped all the corners.

Then, prepares to cut in a file.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Back.

Also cut out parts of the foot. Give care to adjust the horizontal and vertical lines of the guidelines. Ri Sanai foam is wasted and accurately.

The only electric cutter cut styrene sides, the contours are taken at the front.

At this stage, either before or that, As I write, right or left. Then cut out the front as well so far.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


I cut the thigh. Slightly concave on the inside, as shave.

Also knee, leave shaving aware of the shape of the foot muscles. Center line (as going down into the interior) is a mountain. Deleted by the sandpaper to be aware of it.

Also creates the core of styrene cut on the broken arm.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


To copy the outline and cut it in half.

Not cut, Shimasu also outlines other.

Shaved so as to form the arms. Arm and repeatedly drawing, shaved while uneven match.

Feet below. Make cut into suitable pieces of styrene as well.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Also cut out to fit the sides.

Arrange the carved with file type. You have also cut down the arch. Make a turn to be smaller than the feet of the drawing.

Parts are easily broken ankle, and leave a bamboo stick.

When bamboo skewers stabbed, check if you've bent the ankle. If I was bent, back stabbing, then disconnect.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Thin arms which are so hard to stick bamboo skewers, cellophane tape to reinforce.

Aligned at all. this stage, parts of which had been shaved out from the drawing board. Make sure to outline what was reduced from 5 mm.

For a small doll bonus

For a small doll, use a straw to the core. (Photo Senchidoru 30) Straw also made it a straight arm. Is the core right out. I use thighs linked to stroke it hard to cut the foam and the plastic spoon or a straw to eat together and clay balls. Issued a core part without cutting it in half. Innovation comes out of straw, so the vine. This seems unlikely and I keep putting straw strength, I `ll leave it out into a really slick skating is not possible ...

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


More types of foam bonus To include styrofoam and the jam is not the first. Rough to the left and right eyes are clogged. The rough parts using a large foam would be better to use the eye is filled with narrow parts such as arms and legs.

☆ Styrofoam recycling If you want to reuse the foam used before, and this I think a lot of strange looks figurative. If so, repair using light clay sells for 100 yen shops. Is left in the clay core of the trunk light was repaired. Making it more convenient still put styrene. Will become unwieldy and unbalanced core repaired with clay and heavy clay regular oil.

From the side. Nikukatsu or clay will stick to light, it somehow once dry.

。 Using this tool. 30cm ruler, serrated 、Scissors, Permanent marker, red pencil, anti-static spray 、 , Styrofoam cutter

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonés a inglés con Google. Coprolito@gmail.com


03 - How to make a doll to serve the core and molding clay rough The following are activities with a clay core. Clay wrapped around a core of uniform thickness to ensure a minimum thickness. First, we will make the core laps wound. By winding the wrap makes it easier later on without the core. The picture is a commercial strip lap. I put the foot to expand the core. This may of course also a regular laptop. Wrap the core of the foot. It is a little confusing picture ...

If you do not wrap around lap, the gap should be left filled with Scotch tape.

Causes the plant to loose-fitting tight twist. We will put together and perfect for the core cellophane tape. Wrap well in plastic wrap as the core of the arm.

Wrap the body uses large. Where the body covered with plastic wrap.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Stop in at the back cellophane tape. Put a deep cut in the dent and cutters Peel the plastic wrap the length of the recess amount. Cellophane and tape folded back on one by one along the way and then recessed. Then, the shape of a solid core 生Kasemasu making yelling. The photo is the place to put a wrap lifting 抓N cut.

Then gently baking stove. Melts away, so do not do much, please do be careful throughout the process. They also stick to the shape of the fuselage just wrap it this way. Baking lightly to the other parts as well.

Perfect lap I was able to paste in this way.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonés a inglés con Google. Coprolito@gmail.com


I ordered everything. Small part because they may affect it in plastic wrap that wound, This may be wrap.

Next, prepare the clay used. Radoru is out of the bag, Konemasu well before use. Clay is kneaded thoroughly before you use, when to be tough and dry, it is easy to molding. Not too tightly coupled with the use Ranai feel, mutter, now fragile. When the clay is stiff, adding a little water Konemasu. Buying fresh clay is soft, Is hard to even leave it open and half a year. Little man hands, divide in half a bag Radoru is just good in half and knead it again. People are confident in the power of a bag may stretch dough, tired ...

This two-minute Radoru bags. I knead 1 to 2 bags at once, to retain the double plastic bag. Work and hand the minute I put the pouch containing Radoru half. And keep plenty on hand bags, because opening and closing a lot of work and Going from the outside will dry bag even. Ōbukuro pouch and have on hand is a good idea to think different.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonés a inglés con Google. Coprolito@gmail.com


In order to extend the Taku Taira clay to prepare the clay bar. With clear packing tape wrapped around a core of plastic wrap I made a rolling pin.

Radoru extend an appropriate amount. Place the chopsticks on either side will be a uniform thickness and easily extend it to the guide.

Apply water to the surface.

We wrapped around the core. Supplement covers all but at the same thickness at short clay. You have at this point as part of the dent out.

I covered everything. Since the core crafted in fine, I get the form in its own way just covered with clay.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Keep the belly button recessed position according to the drawing board.

At this time, if there is a proper belly button in the center, leave the mirror to confirm. Verify that the clay can become covered with a symmetrical body.

Trim any excess according to the drawing board.

Ri Rimashita. The photograph is part of a hip joint. Shoulder joint as well, leave the clay to match the drawing cut.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Leave the plastic body roughly.

Shoulder blades and buttocks are somehow making a good leave here. Idea to check whether the mirror symmetry again become, the easier it later.

After this, leave a bamboo stick on his shoulders. When will hang dry place.

Wound in the arm and then make the clay. Rod made of clay, rolling pin in the elongated and extend.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


We will arm wrapped around the core of an angle. And wound at an angle, you can roll pretty well in the form of arm support.

While we wrapped around your fingers smoothed the seams. This may seem difficult at first glance, as it were surprisingly easy to do. I rolled the clay may be delayed Taku Taira were so unreasonable, Rather it may be very difficult to make too big.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Ensure that the drawing matches the thickness. I'll Draw a line in the elbow joint spatula.

We wrapped around the legs as well.

I'll spare a lot of people in the ankle and clay, cut with scissors but we wound up frequently. We will clean even after a break-in.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Try to match the drawing, make sure the thickness of the schedule is a front and side. If not too thick, is fine. Something a little thin, not thick, you can safely force to shirttail at the moment. Position of the knee, keep pulling the center line. In the photo are part of the knee - looks like. If you are familiar, it can be here for modeling in detail.

Core is also the head wrap.

Adjust the excess clay off with scissors.

Ttara the center of my head, keep drawing a line in the center of the facial spatula.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Pull around to make sure that exactly the mirror.

Wrap the core of the foot well.

Make sure the size of the feet match the drawing. You have also made arch.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


I ordered everything.

The fuselage, using a bamboo skewer through the shoulder hanger Hanging to dry. If you leave people alone will dry in three days. If you like it if dry, put a bamboo skewer in the laundry can be dangerous shears. Mino is it through the wash in the circle. (It is confusing, but also visible in the picture.) To get across, be it in the laundry because Mino Isao can not hold the weight of the clay, Damages made to fall and body pains.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Other parts of the bamboo skewers sticking to dry styrofoam stand. Bamboo skewers piercing the ankle is good to remove the clay dries. Because it causes distortion and dry place, I would be better to stand or hang to dry.

This one used. Wrap an ordinary commercial strip lap, Rolling pin, into water, scissors, bamboo skewers, chopsticks, Small scissors, metal clay Bella is a mirror. In the photo below is Radoru

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


04 - How to make a doll from the core to retrieve body Remove the core from below the fuselage. Right now eject the core of the other parts.

Check that the body is dry (and dry sound when you hit), pull the guidelines. Stands out at this stage is left cracked. Please draw the guidelines so that the torso in two. (This may be free-hand) Is difficult to remove when caught off either overly reliant on that.

Guidelines cutter The cut will. The fine cut is surprising, and may be cut using a router saw disc were so dangerous, it may be cut in Rezaso.

Neatly cut leg. Easy to forget when you remove it, please check that out right. If you forgot to leave Sou cut, broken or distorted in shape made the least.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


周りに全部切れ目が入りましたら、両側から外していきます。入Rima all around the cut, we remove from both sides.

発泡スチロールを外したら、内側を完全に乾かすためにまたくっつけ the styrofoam to dry completely Kuttsukemasu also inside. 外したまま乾かすと変に歪んでしまうのでまたくっつけるのです。 An dry, so strangely distorted left off. (この段階ではまだ粘土や糊でくっつけることはしません) (At this stage stick with glue and clay) くっつけたら包帯でぐるぐる巻きにすれば一番歪みが少ないですが、 is less with Sli most Kuttsuketara in bandages, 私は輪ゴムを何本か使って留めています。 I'm having a few bear with ru 歪みは気にならないです。 I do not mind the strain.

乾いたら、ヒビ割れを埋めていきます。 Dry, fills the cracks. 粘土を水で柔らかくして、ひび割れの奥まで埋めます。 Water to soften the clay to fill deep cracks. また、薄くなっている所があったらこの段階で盛って厚くしておきます。 Also, leave 盛Tsu thickened at this stage if there is thinning.

凹んでいる部分などに深いヒビ割れが発生することがあります。 May cause deep cracks and recessed portions.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonés a inglés con Google. Coprolito@gmail.com


So far from entering a deep crack in the clay, carved by chisel once spread.

Then fill in the clay. Since the crack to come out and finish the stage with a cracking left untreated, Make sure to fix with care.

After filling all, Kuttsukemasu the body. Elongated clay stuck to the joint ...

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Kuttsukemasu pushing.

No interference Hera drop in clay.

Protruding clay inside, keep together and spread out.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Once you have a beautiful joint, a rubber band and kept dry. Turn left on until the body is like this.

Using this tool. Pencil, clay Bella metal cutter , chisel, Blade angle, Rubber ba

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


05 - How to make a doll to make the face (girl) The following makes a face.

I was trying to picture it like this, While it will build an image.

Try to draw a face. Based on the midline of the line, while checks drawn so that the mirror symmetry.

First, we will draw down the street Tsu clay. Since the foundation is dry, well seasoned clay Kuttsukemasu while plenty of water. The line should be left to the midline and extinguish. Always look at the line, make, making sure the part about whether or not straight.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Rimasu cheeks.

Rimasu mouth around here.

Pull the line from the mouth, we'll cut the edge of the lower lip like a photograph.

Although only sharpened the edge of the lower lip of the mouth to draw a line looks like this. Ppoku will make your mouth and face.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Three-dimensional face is to make as sticking your nose and mouth when viewed from below.

We will also make the nose.

We will prepare clay to make fine nostril vera.

Rimasu clay had been the first part of the foundation remains. Feeling good and I made that contains the eyeball round.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


I trimmed a little around the brow bone to make the eyes bulge. And asymmetric at the mirror to make sure to fix here. It is easy to do it out of soft clay. Around the eyes to adjust, so after putting the eye, Now the symmetry of each part dry passed not only the balance. The rest of the details and will continue to face while shaving again. If you wish to make time for the face, and sealed in plastic bags at the store, Make over several days. Is it safe to make spending about a month.

Dry, I put a quick rasp. Sand is easy to use and what is a sponge-like backing. You can make a filing to the surface firmly. 3M is written like a rasp. In this case, it's medium And Fine Used. If you use sandpaper to about 120 to No. 320. Give careful Sanai Parts. Also, when the cut is always a dust mask Please, as you.

Just below the eye with a pencil to draw the eye into. At this time, check whether to be drawn into the mirror symmetry.

Rimasu as you draw down on graver. It is easy to use for a small V-shaped gouge.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


I carved.

Rimashita the ledge, so I thought I'm too small percentage of the head left and right eyes. If the eyes are quite large for the face, head and look like the picture so far. (Eg eyes it is as normal as any balance) Elaborate with his eyes around the eyes because it was clear, Funny place balance, correct a little bit where we have enough meat. The dry and dry shaving Tsu again ... I repeat.

I can almost put the filing.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Profile has become something like this. Nose, upper lip, lower lip, jaw line this seems to be tied in with a good balance. I just recently changed this picture molding. Elated at the brow bone with a higher first Fill the hollow between the eyebrows and nose when viewed from the side. I like a good idea to reference the ancient Roman sculpture.

The filing also prepares to place a crown violently. Etara, try to measure the head circumference. Dollfie head circumference is 23.8 to 25.0, so adjust the appropriate size Kurairashii cm. This is a useful idea and could use a wig to fit your head size dolls on the market.

Check the balance when viewed from various angles.

Is a deep carving.

Check whether the three dimensions to see from below. The fine details will make putting the eye again.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


How to make a doll face You will receive an extra chapter on how to make faces.

The recorded production was introduced in, we'll look how to make writing easy. First, draw a line on the basis of the face. The approximate location of the eyes and mouth ... Tokimasu the mirror and check for any gaps or horizontal line at this center.

Try to draw eyes and mouth. The mirror to check whether the eyes are drawn symmetrical position at this time.

Then make your nose first. The height will Tsu at the height of the expected completion.

And this is also Rimasu mouth. I think in the cheek or days! Like I'm in shape to complete only when viewed from the side. Only serve the short clay around the center line of the face.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Will continue to meet the following profile could only make sense when viewed from the front. And this moment I just Tsu right side. Tsu will be funny as figurative for the ridges have Tsu minutes already.

I recommend to detail and try to stick to in the massive awareness. Once you make the jaw or cheek firmly. Chin and forehead are silly and make good. I think it'll make it easier later to check the target at this stage and often. I think that three-dimensional look that makes it easier this way ahead of the center line irregularities. So be good to make a gentle

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


06 - How to make a doll's head broke into the eyes Next dividing the head into the eye.

Draw a line in the middle of the neck to match the drawing.

Draw a line to match the position of the ear. Ear nose to about the length of the eyebrow. Then, draw a line passing over the ears.

According to the line of craft this thin blade The cut will. You can clean the blades so thin cross section. Recommended.

。 We have received a break.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonés a inglés con Google. Coprolito@gmail.com


Remove the foam and press the contents through a hole in his neck.

I write to mark the beginning of the joint. Place within the thin thickness of the head, You have to be adjusted proportionally.

Then shave in the eyes of clay. Use of small swords and sword triangle.

To penetrate. This is fine but the router've drilled.

The next cut will have to enter the eye from the rear. Flat chisel round blade handy.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


From the table, we will cut the thickness of the watching eyes. It would be hard to break the eyelids and they made great pains to focus on, Work with care. If yours is okay if this is so Kuttsukere clay ...

Retara the eye holes, try to put a temporary acrylic eyes. 。 The cheapest on the market, which is used many times to look more formal. It is 18 mm in diameter. The choice of the eye, please try to check the size of the iris image to draw closer to making eye iris Ndara.、 Many eyes are on the market sold well, including the size of the diameter of white, Since the size of the iris is the impression left, choose the size of the eye iris. Commercial Glass and Acrylic is often slightly larger than the radius of the size of the iris of the eye. Eye when you buy, please be sure to check the size of the iris. Tadashi Sada and measure borrows you shop. Also always check the mail.

Extended from the back bar. Kuttsukemasu clay.

Turn on the eye. Pressed against the eye hole to fit the feeling. Stripping back Wanakattara free to try again. While the eyes or uncheck, will reshape the entire eye and eyelids. An eye to eye holes do not match, seen from the table that the extra hole is disgraceful. We packed clay fits.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonés a inglés con Google. Coprolito@gmail.com


Once the approximate location of the eyes, to fix once dry.

We will make a portion of the gills while dry. I draw the jaw line like this properly ...

Deleted by the sword along the lines of circles.

Toward the back of the head shaved more of the sword.

I shaved. In the ear of a sudden people are depressed. Create images that.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Conditions the shape 盛Tsu the gills.

The skin on the back of the first clay, will build upon the soft parts could not trimmed. I think it would change the image of his face and into his eyes, Close to the face image will be sharpened with repeated or you can dry Tsu.

Pull out your eyeliner or eyebrows, or draw to make sure the image. Now looks like now.

Head is still closed. Tara closes bridge temporarily to adjust, at that time will remove the eye. The eye is doing way into the last hole in the neck. It is also recommended since they can finish beautifully around the eyes that way. Difficult because some people think that fashion in this way, but if you want to leave the eye will continue to work with and protected by masking tape. The head broke medical tape You have temporarily stopped by.

This time using the various tools and a pencil chisel, the photo on the left of the craft this thin blade Medium abrasive sponge 、fine abrasive sponge It is Chisel If it still can use what I bought at the time expires in elementary school.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonés a inglés con Google. Coprolito@gmail.com


07 - How to make a doll to make the ears Make your ears. Draw a line drawing according to the center of the side. Looks like the shape of the ear from getting connected to the jaw line, making an angle slightly. The length is from under the nose to about eyebrows. Draw both sides. At this time, please make sure that the right position to draw on. But since I heard your photos, articles, please provide the shape of the ear. Prepare images for the left and right ears to flip on the computer. Would be better to make sure the realism while watching his ears in the mirror with it. Following the previous head was divided medical tape Have been temporarily stopped. In order to see the overall shape, I better keep my head up temporarily.

Kuttsukemasu extended elongated clay. Conscious part of the earlobe, one should be left a little thicker.

The spatula and ears, will continue to shape the ear. Since the rounded edges of the ear inward slightly, while considering the shape it creates.

Tara edge, and prepares the way their ears upright. We will make the ears stuffed in clay to make cut at edges.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


I made a rough flow. I prefer to build grooves crafted stick. Sorerashiku be made so as not to place angular. You have also made the round part of the front of the ear.

Image flow is like this.。 The shaded portion is a groove. Will be raised to make the point that the white part. The Fukumimi or to your liking. I seldom have a natural ear (!), So the ears would make the least time.

。 To make the other side as well. Place the clay in the form of an elongated first hearing, and prepares the way up together and.

Check whether at this stage become symmetrical.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonés a inglés con Google. Coprolito@gmail.com


Check the symmetry seen from below. We will also make the contents of the other ear not worry. While the trick is to make soft clay.

I made right. Some gaps are repaired so often over sand or Masu Keshi is pretty dry, and sand. The Suponjiyasuri Medium Used. If you notice a shift in position after a dry ear, ear I move on. So ugly when you stick corrupted and after filing the bond in this case, Put a hole dug in the clay head, the stick of coarse sandpaper After scratching, the Stick to the warmer as well. This spatula made using a craft stick. It is also useful to make a fine place ear.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


08 - How to make doll making body .

The body is viewed from various directions, filing Make sure to fix the distortion in the cut. You have drawn a line drawing according to the center of the body. You have drawn so as to be symmetrical position of the bones and muscles.

Make a mark drawn on the side of the rib. You have also drawn the pelvis.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Keep pulling the marker to draw a center line the back side as well.

First, cut out shapes with a chisel in the clavicle area. Ttara, and prepares the way to adding a little clay.

Chest, place the clay we ribs.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


When you make the ribs, place the clay bar as pictured diagonally ...

Shimasu crushed.

Abs also create.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Feeling towards the solar plexus we recessed ...

Make sticking part of the pelvis. The mark is left on the left have not done anything yet, so, Tsu clay is part of this triangle.

Could be roughly one-sided.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Be a symmetric, also create the other. It seems to dry made from crushed side were made earlier. When you make a unilateral or bilateral symmetry has become constantly making sure you work up a mirror copy.

Back from the front to make dry. Ass sword carved sculptures, carved so as to leave the inverted triangle in the ass on the line too.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


In the middle of the back line is depressed. You have to carve round flat and straight sword.

We will make the shape of the buttocks.

Ass on that not so extremely depressed, leave stuffed with clay on average. (Please refer to pictures of naked people)

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Also makes the scapula. Rimasu clay this form

Once you are back to front once dry, rough eye Suponjiyasuri The proceeds. The file can then put a vacuum cleaner to suck dust, is a part of re-bumps. Dry sandpaper to fix corrupted ... but we will repeat the shape of the ideal.

You are now body. Strong contrast images are displayed by clicking. The point, -Chest is out front unexpectedly (such as lean back ...) Dents short of sit-ups - to the chest (sternum because there is no recess) ・Muscles of the neck, extends to the neck, right next to (the translation is not going on straight) ・ There is a rough neck tube, not just in its own way (Ito Makoto cut along the muscle) ・If the bottom of the ribs and flanks Gere gently, conscious of the shape of the clavicle without a lot of pelvic discomfort good reference to make good pictures of people standing (making it more carefully exposed it)

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonés a inglés con Google. Coprolito@gmail.com


Back.

Diagonally. When the body is better to make the article had something. I may make it look like were a doll artist's body to make, There is insufficient information such as images looked so small from various angles. The artist's body, into the artist's interpretation of "lie", so sometimes a lot, The easily imitate is not good. (I heard that my particular ...) Artist's dolls are a unique deformed there is a significant force is terrible and beautiful molding, is well able to imitate them amateurs. Because of its beauty comes from the well of the plastic core is not only reproduced to mimic the surface. So the first person is a good idea to have a material flesh and blood as possible. I just can not figure muscles are very good modeling. (Become aware of body muscles too scary)

This one used. And the various filing 、the coarse Suponjiyasuri 、Radoru It is. I think I filled out soon scrap of clay, Keep a plastic bag to collect and save them. If you return to the clay swollen by putting the water. Means for re-use. Also, when working with chisel cutting dust mask We recommend that you make.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonés a inglés con Google. Coprolito@gmail.com


09 - How to make a doll to make arms and legs

From the first arm. The right hand photo. Viewed from the side and, 90 ° turning front seen in Figure. Extend your hands straight in front, palms upward as it is when you can see the inside of the elbow The state. The line is drawn from the center line on the side of the elbow joint, I sit at the front center of the wrist.

i'll Draw a line from the elbow. Inside and outside of the wrist, so that the line is drawn to the position of symmetry. Colle is the view from below the wrist. Are shown in red dots on the bottoms of the inner and outer lines of the arm.

These two points and the line is a line of two bones radius and ulna. (It is the little finger ulnar bone. From one scale to measure two feet and stuck to what the little finger side of the elbow) It has two arms in the bone, "tweaking" has been called to allow work. What has happened in the twisted bones, we know from the surface. The tweaking of course, this line will be moved if a living man. But the doll line, so to make work, makes the most natural state line.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Along the line chisel The shaved. ラインが山になって残るように。 As the mountain remains with the line.

You have also cut down the upper arm. Diagonal, front, diagonally from the inside photos. And he has muscles like this.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonés a inglés con Google. Coprolito@gmail.com


Also according to the mark shaved upper arm. The feeling outside the cut line. You have to cut the inside of the elbow slightly concave.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Once you have a recessed portion, next to the bulge Shimasu Tsu clay.

Seen from the picture side of her right arm.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Make left arm as well. Line is symmetric.

Kashitara of coarse Suponjiyasuri Arranges over.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


The following creates a leg. There is also a point of the foot line. The line below the knee and thigh. Part that makes the most out of this line.

We will cut along the line.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Suponjiyasuri rough eye, and may be cut along the mountain area.

I cut along the line.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Then you fill in the recessed part in adding to the clay, and then adding the bulge.

According to the side view of the drawing, where the line is missing Rimasu.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Clay Rimasu thighs as well. The fit together with the side view of the thickness. I think on your lap and pretty stiff meat'll serve baggage.

If the base of the femur is shorter than the drawing, keep drawing by adding the clay to fit. Part of the arrow. This is easy to make had better be adding before removing the core.

Also makes the knee. As the bulge too much. After this it will isolate the portion into the joint around the knee should be left to make right. It is hard to fix tear, I appointed you as close to finished as possible before hanging up.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Dry, and prepares Suponjiyasuri over the coarse.

Is good thigh muscles to make aware. It is good to figure referring to the muscles. Sitting properly can make a dent in the inner thighs and. When looking to gouge a hole is shaved from the back and dry clay Tsu.

The point is that run diagonally across the thigh muscles.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Make sure to balance all side by side.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


10 How to make a doll from the arms and legs • Removing the core

Draw lines to match the drawing of the knee joint. I write to mark the front.

Side, even after I write the mark. The four split the knee mark.

This time I try to make a joint mountain type. For the first time may be more easy to make a straight cut. The only difference between your knees straight down into the case, after the work is exactly the same. Draw a line on a mound. The same as the height of the sides.

Where is the best type of high mountains, between the knee and go through the flesh above the knee.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonés a inglés con Google. Coprolito@gmail.com


Cutter We will cut the curve. It is easy to make had to cut lines were more difficult to do this. Straight off the back of the knee, so that part of the craft this thin blade Work on.

I cut off. Neji Tsu will foam in each.

The foam in the nose pliers Put out by pinching in and pry.

↓↓

Wrap it in rolls, like a beautiful photograph exit to work.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonés a inglés con Google. Coprolito@gmail.com


The line will cut the same arm as the elbow joint. Left and right arm are easily mistaken, I'll try to understand. (I write my feet were so wrong) Also, please keep writing quad mark as the knee.

This thin blade and cut the craft.

The cut of the knee. Please keep writing even a line of quad cut surface.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


I ordered everything. Rashiku be a little off the joints.

Using this tool. Pencil, cutter needle-nose pliers 、, thin blade saw Kraft 、, the coarse Suponjiyasur It is. Photo cutter has a blade back and love it so hard pressure. Though I wonder if the more robust tools like cutters

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonés a inglés con Google. Coprolito@gmail.com


11 - How to make a doll to make the hands and feet

Prepare a thin stainless steel wire. This is a 0.9mm (20 ♯).

Cut a bit shorter than the length of the wire along the finger of the hand drawing. The wrist portion is left in good time.

Along the hand -nose pliers The bend.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonés a inglés con Google. Coprolito@gmail.com


Part of the base of the finger on the magic mark. Boundary between the palm and fingers will be here.

Bundle in the underlying cellophane tape. Note that the location does not work.

We will make a way to bend the wire. I pointed to where you should see in the magic mark. Create a shape while considering the extent of joint and back of the hand. Do not forget to wire the fingers that have a short time.

Tsu dried clay to the base of the first hand, would secure the wire. Since the cut wire to fill later 込Manaku heel of the hand is making so much good. Keep the heel of the hand to make short, make a clean cut at the wire to fill.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonés a inglés con Google. Coprolito@gmail.com


Thin wire through the clay will. I have a way to make the clay stick wrapped in cotton and medical tape wire, To get used to, sometimes it comes out polished content at a later We are going to just wire.

In this state, let dry for now.

Or fingers to draw a line drawing according to where the far back of the hand packed clay.

Sorerashiku be aware of the clay to serve the knuckles. The fine details Craft Prepares on. Can be made at once familiar and, At almost disappear after the first coat and put Kino Migaku and nails. Recently, "the form of a finger nail," and then the modeling, I like to dig in making the last nail was buried.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


You can also insert the fingers one by one to make. Look for people who get lost in the hand. You have marked off the joint as how to make the wire.

While the image of a face in my hands and bend the wire one by one.

Wire into the image like this in the fingers ... Note the angle of the base.

Make a finger in clay.

Through the wire.

Spatula and make the joints.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Now dry.

Dry, chisel Arrange the carved in the shape. When making this 込Mimasu knuckles.

I also made all the finger joints. It is pretty tough work ...

Keep brushing Kashitara. Making the most of here since the end of the finger, then work may be easier. Keep the base of the fingers marked according to the drawing board.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonés a inglés con Google. Coprolito@gmail.com


Make back of the hand.

We will feed your fingers one by one.

Prepares the way to convincing. Quick-drying glue to secure the shed to dry once the base of the finger.

Re-connecting with the back of the hand where unnatural.

Ready to dry brush. Which is easier, so you will know I prefer Please try a lot.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Make legs. Pencil mark the position of the finger according to the drawing board.

Marked according to the router Drill a hole. When there is no router in the gimlet drill.

Cut the wire as the core of the finger according to the drawing board. Make a mark at the base of the finger magic.

Into the drilled hole. Inserting the secure with superglue to the foundation.

Glue has dried, bend the wire to keep the toes to fit the curve. Careful not to tell the tip of the wire to the ground.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Make a finger-shaped clay.

Reconnect the wire, a fundamentally Kuttsukemasu.

You have made this at the back of the fingers.

The same height as the sole and fingertip. Then once dry.

Dry, we'll make the top of the finger. With this in mind will Sorerashiku joints.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Balance and fingers also prepares general shape of the foot. Sorerashiku thumb and little finger and that's going to make that lean inward. Carved on the sole of sandpaper, so leave it flat. When you do not want to unnaturally flat rounds or more over the sand.

Drill holes into part of the ankle joint, leave out in a polystyrene core. If you have a broken finger in the workplace, instant adhesive The Kuttsukemasu. Harder to fix than the broken clay.

Sole of the foot is like this ...

This one used. Instant adhesive needle-nose pliers chisel ă&#x20AC; Vera, clay, router It is. Abrasive sponge And the place one more small step Things.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


How to make a molded polystyrene spheres BJD How to send in an extra edition molded polystyrene spheres. Way to get over a difficult ball for making molded. Molded polystyrene spheres of links to garden dolls tiger eye expressions are also introduced. Uneasy handling of gypsum would be better tiger's eye expressions.

The polystyrene sphere is attached from the first half of the line. (Should be exactly half marks, so maybe when the molded foam!) Clearly causes a sharp tap of the first line.

out a bit more in line with half the oil clay. 3 ~ 5mm in the other half feels about you looking at. Can I make the container block. It is put out to cut container like the picture next to it w

Poured gypsum dry thoroughly before painting the potassium soap. What a good idea and so easy to paint peeled off and there is a mold release agent. (It is hard to take off from the mold a little more than half of the line) Gypsum is surprisingly easy to use to mix it hardens properly. Could be used is a good type of tough times.

Tokimasu left for the day shed. (Please follow the instructions of the gypsum)

I disconnected. The plaster casts are out of line attached to the first half.

It is useful to write the size.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Use. I push the clay at a place 12 and 15. ShiNdara pencil behind the muzzles, etc.. The polystyrene spheres using a small round muzzles were other sizes.

And removed from the dry line "half" You will find attached the hemisphere. To cut down the line, ready to serve, combined two beautiful balls! Spheres are easily dislodged, so please take joint instant adhesive.m (As Hami Nai out) Lot on clay dug to bury the sword in the corner joint, it is a polished finish. Styrene, but not so much the size Toyotomi, I think luck had much use with just my size. I may want to use and also consider the type of clay shrinkage. If you know the type you take, "but why take the top and bottom!" I will. Of a sphere with a pop can make to a good start but, It is uneasy about the strength of the adhesive joint and Senakatsu. Cali and the crack and I are working together and packaged in just the clay (sweat)

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


12 - How to make a doll head to make a joint The moment of truth is here. Make the joint. An important point in making a joint, the joint instead of supporting each other matching parts, Knowing that I have received and supported by ball match. Non-appearance by a spherical joint that is just a decoration. The fact that only by functioning as spheres and Misao Seki. The sphere does not work much too small. I also look absurd to say either too large, I think it is important to consider the balance that you plan to draw upon.

First, make a ball joint to use. Make the drawing to fit, Please consider going to make it actually made the balance between the hands and feet. 10,12,15,20,25,30,40 foam core is used in a doll about 60 inches if there is a millimeter too late. 2 to 5 mm increments but, surprisingly, so this difference is large, I think bigger than a good idea to align. How to make a lot less after the ball, I think it's easier not to make the type to take to make a big ball. How to make a molded Styrofoam balls from landing the first expression Garden tiger doll Is introduced. This could be handy for even the amateur is so convenient. Measure the diameter of the ball drawing. This time around 60cm dolls, 44mm × 2 ball of the hip, Ball of the shoulder joint is 28mm × 2, each ball is 28mm × 2 knee, Each ball is 18mm × 2 elbow, ankle ball is 18mm × 2, The ball joint neck 30mm × 1, 15mm × wrist ball will make a total of 13 2.

Would fit the size is made from plaster mold. How to make plaster casts of the globe here .

The ball can not use type sizes, made from Styrofoam balls wrapped in clay. (Is it safe to make in all spheres of polystyrene core course) The thickness of the clay ball at least 5 mm is required. The sphere diameter than 1cm so used to going to make a small Styrofoam ball core. When creating a very small ball, without having to put a good core. The guide can be used at many things would be like extending chopsticks and pencils. Shitakattara 5mm thickness of 5mm height, use a guide. 8mm thick half-hearted or even when I want, can be accommodated by changing the thickness of the guide.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonés a inglés con Google. Coprolito@gmail.com


The clay wrapped in the left and the right core.

I think when you wrap a ball and wrap well but can often cut with scissors. Sphere of the same size will create a properly align the size of the left and right.

Once dry it can round, filled with clay and then recessed portion, Prepares the way to look like balls as possible. Dry and it will continue to polish the ball by filing a true sponge. The first is the coarse, the following specific Scrub. If we cut down the sight of turning round and round and swollen, becomes a sphere. Make over time so that as much as possible without compromising the true sphere. If you do not exactly make the ball joint, the joint when you make a lot of work later.

What part do the ball thing which I write with a pencil. It is easy to keep and further sorted into boxes of candy.

Tara ball, a pencil mark in a circle, carved by chisel drill. I have round holes and flat blade of a sword.

Drill hole size is as large as one may be the size of the cavity should be larger than the stick part. Opened the hole in the polystyrene core out. If you see cracks in the soft clay fills.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


First, make the joints of the neck. Together and try and head the ball, his head shaved in over a chisel if suitable height to make drawings.

Retara neck, Kuttsukemasu wet clay with water and extended the bar area is dry.

Neck snap the ball there. Midline so that they can adjust to the ball.

Prepares the clay around. It seems to shift position were a ball, once dry conditions on Prepares the way from dry.

The following creates a sphere toward acceptance of his head. Please too long as the distance from chin to neck. Give careful around here, so easily mistaken. Wet with water around the hole, the rod extended Kuttsukemasu clay.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Wrap and cover those parts of the neck, put his head push. In this case, adjust the desired height of the neck.

Cut off excess clay overflowing. Under the surface, but I think that beating up and allow to dry for now. Fill a soft clay from the irregularities in the dry.

After drying, the clay 盛Tsu You have also reinforced from the inside.

Back of the head shape and prepares further.

Viewed from the side like this ...

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonés a inglés con Google. Coprolito@gmail.com


That lead to the neck and rolling joints. I think that this beautiful and profile.

The following are in your head through the wire and create a hook where the rubber. Side of the center line, drill a hole on both ears. I look at the black dot. Verify that the location of the hole left in the match.

Router Drill a hole. When there is no router in the gimlet drill.

Stainless steel wire off a little longer than the width of the head. The thickness is 16 ♯. The thickness of bend easily. Iron wire, so ugly rust came out later, please be sure to use the rusty material Not cut the wire center -nose pliers Pinching, and press from both sides.

Make a circle in the center. You have reached the other part straight.

Put each one through the hole in the bent wire. Mark on an extra piece and cut both into position the tip of the wire into the hole. At this time, so come out of the hole where the wire.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonés a inglés con Google. Coprolito@gmail.com


Not cut from the inside superglue 。 Secure it.

To hide the holes in the outer packing clay.

When this wire through the rubber towards the right under stress will be. You have reinforced clay 盛Tsu so many parts beneath. The red lined area.

Keep the neck toward the holes in a round chisel. It is part of the sphere is quite safe to drill a large hole in it almost obscured.

Make a wire through the center of the sphere of the neck. It takes force to distribute at a later time through the rubber, to avoid the pain of arthritis. If the neck also helps to prevent a strange turn in the direction of the head. From now on you will stick the ball through all the wires. Viewed from the side, drill the center of the sphere.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonés a inglés con Google. Coprolito@gmail.com


As the red line through the wire. Like when you put a wire on the head, secure it from drying glue. Also filled the hole and hides the outer clay.

Making it feel like when viewed from above. Neck joint is now complete.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


12 - How to make a doll to make the hands and feet joints

Ball into the ankle portion chisel You have opened widely.

Put the clay in a circle, put the ball. The balance like this Had better be stable heel with a slight overhang. Prepares dries around the ball.

Hand, leave shaving off part of the ball into the core wire.

Kuttsukemasu the ball. The ball is put into those cute little upward acceleration than with the wrist straight.

So that the natural balance of your joints.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Back of the hand is pretty much better and not put a bump ball. Lead to ball to make gently stuffed with clay from the fingers.

Kuttsuketara ball of foot and hand, makes the following under the joint. Keep off the drawing board to fit the ankle.

Stripping the ball inside to get the size. The sword of convenience.

The clay stuck to the wheel toward the ankle, foot push across the lap.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


The ankle could receive. Should not vary the height of the right and left foot. Try to stand side by side, it is ok if the knees are aligned.

Can make under the wrist. Turn your wrist to match the radius and ulna. The photos, some lines drawn in pencil.

Time off is just fine and give a trench along the line V-shaped gouge. You can sharpen his sword along the groove of the later, the Imasen hand.

Stripping the ball inside as well get the wrist.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Clay put in a circle, pushing across the lap.

You are under the wrist. So different from the length of the left arm, side by side'll check.

If you put together and leave the wrist joint of the hands and arms like this. In this case, the ball elbow, wrist and then to work the ball as described below.

Crafted for the hook rubber ankle and wrist joints. Mark the holes like a photograph.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Mark on the wrist as well.

Opening the joint portion of the elongated holes are shown in the figure.

Follow the signs painted, router Drill a hole. Then the hole 繋Gemasu. If the router is still carved Gemasu. If you drill a hole in the chisel We are holding hands and cutter holes between. Then spread out to form a clean hole in the chisel. Since it is difficult to form and beautiful and they spread out a hole in the router I finished with a better chisel. Uses a flat blade chisel.

Small ball (ball not in the core) is to drill a groove to divide the router.

I bore my part may have placed with or without ... The reason is the following.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonés a inglés con Google. Coprolito@gmail.com


S makes the following pick up cans and rubber. Appropriate amount of wire cutting, needle-nose pliers Bent to create a form. It is easy to make and use two pair of pliers.

Kang S, towards the hand. Wrist ball goes into the smaller circle.

Then S through a wire made of cans for pick up. The wire enters the picture looks like.

S Kang wrist placed in a ball, let through a wire. If the wrist in Ranakattara Kang S, delves into a little groove. 30cm long when you make a small doll, S Kang is not placed. If so thin and sturdy rope through the S instead of the can. I used to solve the kite string. If you put the strings, making it easy to make those last through the finish are over.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Turn off the wire, S Kang and secure through. At this time, and pouring from superglue S bond may end up cans. In that case, the adhesive poured out from the hole.

Could be affected. The other part of the hole trench, S is also open to joint wear and tear is moving in cans. Then glue or sink of S is also easy to work and put the cans. I may make some people back to just ditch it.

Make sure to try to arrange the balance.

If you are creating and connecting the wrist and arm will look like this.

S Kang has become like this internally. When used through the rubber Kang S construct.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Kang S can make towards the foot.

Wire through the ball of the ankle as well.

Through the wire like hand S Hook cans. Wire is fixed by superglue. The ball is greater than the wrist, S Kang pass when I do not think so much trouble.

To prepare the shape of the foot, leave balance check put my ankle.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


12 - How to make a doll to make Hip

Parts of the inner thigh chisel Keep on shaving. The sword of good.

And repeatedly drawing, drawings and verify if it matches the length of the height of the sphere from the knee. Shaving or shortening the length of the femur from the top you find the match itself, 。 In addition to shave the inside of the thigh. Should perhaps be addressed by simply cutting the inside. The ball goes out more than half. After adjusting, lock the ball of clay. Note that the same height as the feet of the ball.

Fill in the clay where recessed Kuttsuketara unnatural.

Make the body by the side. Nasou not entered the ball, leave shaving spread out the holes in the fuselage.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonés a inglés con Google. Coprolito@gmail.com


Just adjust the body to go into the same side.

By wetting of the body, a ring of clay Kuttsukemasu.

Press the instrument wrapped in wrapping the femoral ball. 位置は製図に合わせて作ります。 Makes the position according to the drawing board. Too much ball, so as not to please or Gi. Also, please be made according to the drawing position when viewed from the side.

Now that we have received both. Once dried I would still dirty. When dry, fill the recessed soft clay where unnatural.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonés a inglés con Google. Coprolito@gmail.com


If you cut your knee straight, you can stand at this time loaded with parts.

You have made a nice little bit of ass. I was short of the sides a little Shimashita width of the waist.

The following are adjusted to ensure proper seating. Try to put your body on the thigh, so make sure you sit down. If it is caught in the groin 座Rena requires adjustment.

If you get deleted by a chisel.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonés a inglés con Google. Coprolito@gmail.com


How can the thigh, the inside of the foot, shaved the base of the ball a little bit.

I will be able to sit like this.

When viewed from the side, but the body is stable Nomeri is a bit much.

After adjustment, make a little bit of crotch.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


No part'll cut polish dries on average.

Drill a hole through which a rubber ball in the thigh. It is seen from the front. The length of the groove is made slightly more than half as far. Will work to make a hole just minutes short rubber.

View from above.

穴Opening the holes is shown.

Hip ball through the wire as well. As the wire through the center of the sphere

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonés a inglés con Google. Coprolito@gmail.com


12 - How to make a doll to make the shoulder and elbow joints

This makes sense to look in front of the elbow joint. The elbow is a tricky angle to pursue is the simplest way is to turn the front.

Seen from the front of the left arm. Divided by four arms of the marker, draw a line to take the top fill line.

Cut along the line until the ball shaved the inside.

Adjust the height of the ball according to the drawing board.

Secure the ball of clay. Sphere is like a little lean on the inside.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


You have also made elbow.

Make sure you get the same height on both sides of the ball.

Keep dry brush to clean.

Will put the ball under the shoulder joint before making the elbow. Stripping for your shoulder until the ball drawing.

Secure the clay. Note that, to prevent clogged in the hole I've drilled the ball of the shoulder joint.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Cut the extra piece convex, and prepares the way to fill a dent in the clay.

By the elbow and then makes. Cut the line like a photo.

Seen from the inside.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


You do not have to fail along the lines cut with a sword sharpened triangle.

Stripping the ball inside to go.

Make sure to fit the ball into the drawing.

Put a ring made of clay, pressed against a lap across the elbow joint.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Now something like this. As more than 90 ° bend, cut back a little and adjust to the inside of the elbow.

You have to reshape the hole cut by the elbow a little too dry.

Make acceptance of the shoulder joint. A little too broad, so both armpits, and then shaved backing.

I shaved.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonés a inglés con Google. Coprolito@gmail.com


Both are now under arms a little narrow.

Cut a hole until the ball of the shoulder joint, Put a ring made of clay, pressed against a lap across the shoulder joint.

Keep dry, shaping beautifully polished.

Drill a hole through the rubber elbow. It is seen from above.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


View from the front.

Drill a hole through the rubber shoulder as well. Small oval hole is good.

Conscious of it this way through the rubber.

Opening the holes are shown through the rubber.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Through the wire to the elbow.

Wire through the center of the ball of the shoulder joint as well.

Tools used to make the joint look like this. Router (When not using the cutter and the drill), chisel Various The wire 16 ♯, or a commercial Kang S, Longnose pliers And the filing of the sponge medium And Fine 。 It is.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonés a inglés con Google. Coprolito@gmail.com


13 - How to make a doll and adjust the tie for formal independence

Provide for connecting a rubber doll. Since this is about 60 cm doll, and provides a four rubber castle keep. What that refers to the main enclosure there is what this bunch of thin rubber. This rubber is sold to ordinary rubber Yuzawaya corner. Two fold rubber while, until the opposite wrist and shoulder through the wrist Would pass through the ankle on the opposite side from ankle to head later. I never be too perfect and the length, leave a little short cut like a photograph.

Through to the rubber tip of the bent wire (30 centimeters), and Provide the gut loops were. I made with Scotch tape pinned to fold the gut.

Used to pick up cans also make a head S.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Shino Tooru who looks like this rubber. Through the wire into the ball joint, please be careful to look behind you or pass through the front.

S through the first cut of the right foot with rubber feet for Kang. With the S-fold the rubber so that the cans in the middle. Easy to do so through the same way even from the left leg.

Through the hole in the knee bent the tip of the wire. At this time, the front side of the wire through the knee joint.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Hook the rubber feet.

Just pull through.

Through the tip of the wire is also bent the hole in the thigh. This time through the wire behind the ball through the hip joint.

Hook up the same way through the rubber.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Through the tip of the bent wire through the hole in his neck. This time the ball through the wire behind the head Takashi Seki.

Increase pull the rubber.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


You have some strength in pulling the rubber. Becomes too weak to pull the joints Gutaguta. Joints will be damaged but too strong.

Out of the hole in his head bent over the tip of the wire through the hole in the thigh. Takashi Seki wire behind the ball go through his head at this time.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Pulled through the rubber.

For now stick his neck (The photo was cut chopsticks) hooked on leave.

Parts of the knee and thigh rubbers just like when I came through, my ankle is final. 。 You have some strength in pulling the rubber.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonés a inglés con Google. Coprolito@gmail.com


Kang S to hook the leg, tie a rubber.

Hide the knot in the leg.

Now, in this state. Independence may be adjusted here. Adjustment for independence has been described at the bottom.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Then through the hands.

We like through the rubber feet. The ball goes through the wire behind the knee.

Put those in the gut loop hole in the shoulder joint. As the ball passes over the wire through the shoulder joint.

Bent on a circle hook from the tip of the wire, down to pull out.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Hook the rubber ring gut.

Through the gut to pull the rubber.

To the hole through the opposite shoulder. There are rubber feet into the body, not much difference through the front and behind it is not through. In doubt, leave through the back.

Opposite shoulder, put the gut by way of a ring from the elbow.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Pull a ring out through a hole in the shoulder joint.

Gut through the rubber, you can pull the rubber elbow.

Through the rubber as well as when he elbows, wrist ties.

Take the rod in the neck (careful not to let the rubber this time), Hook for S cans head.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


S Hook wire rings part of the cans in the head. Time to secure the long reach to pull the rubber SAs the S Hikkakeru cans hanging.

Kuttsukemasu head.

Assembled. So as to make drawings, should be the size of the schedule. I made a small body like hands and feet are Dollfie. Photo doll, please do not worry too much wrist and arm are linked.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


I'm back like this.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


It is well-balanced and dolls can be independent without having to use the stand. Independence is never difficult. To verify that the proper independent, the Hold the hand of the doll body and doll sitting face to face. Fixed to the floor stepping on your foot and toes of the doll. It is easy to do behave that way is bad. While fixing the toe, and adjust the angle of the torso and knee Wari, Clearly understand the balance of Independence. I'll write that figure independently, but in the fall a little shake, Return to a balanced position on your own. Even when risky for persons with disabilities, will soon fall and shake.

When independence is not likely that the first Wari bad knee. If so make absolutely independent knee drafting perfect fit, please try to check. After the drawing does not match well with the independent position of the hip joint. (A strange position and become even with Disabilities)

In addition, when O is independent of the poor become even legs. To close coordination with the knee as a blueprint. The cut surface of the knee, if you adjust the height of the left leg O can be resolved. That depends is often a little longer to heal cut inside but said the knee. (←図の赤線部分) (Red line in the figure portion ←) 。 It just 直Ri be difficult, shorten the lateral knee incision. 起きる現象だと思います。 O legs, so I try to make it happen phenomenon to be of the thigh perpendicular to the ground. 。 I think it is good to realize that with a slope like the light blue line. (Of which is perpendicular to the ground below the knee)

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonés a inglés con Google. Coprolito@gmail.com


Do not bend your knees and sit, leave work to check.

Check the image and try and cover wig.

Understand the rough and take a picture at this stage, you will find the place to be fixed. Let's intention to take the finished lot.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Adjustments to independence

Some people think that self-reliance too picky. But to say that the independence that is properly adjusted in the right leg length, The thickness of the same thing under the right hip (it is the same attitude of the ball left and right hip that is) There is also an indicator of such a high degree of completion. Because let's independence will create at least. Adjustment discussed here before so we can all temporarily assembled, Assembled on a photo of what is done after the adjustment. Try to be standing just feet and bodies in assembled state. The entire body, you'll find that you lean toward the right. The drawings have been made to fit, you will like this subtle shift occurs because, after all, rule of thumb.

Looking at the knees, it seems high enough for the right knee.

What you'll find the difference between right and left high ...

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Try floating a few feet to the right side seems to fit the height of the knee. In this case, a little thicker by the ankle to increase the height of the knee.

I have come up with Kang S, S wrap up small holes through the cans.

Clay to take on board when they made the joint as the foot pressed against the foot. Since the goal is to get thicker, so push too much.

Thickened by the minute, is less on the outside of the ankle. You have longer 盛Tsu clay.

Was adjusted, the height of left and right now the same knee.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonés a inglés con Google. Coprolito@gmail.com


Is it safe but I think now, where more detailed checks. It is easy to photograph, in front of you about this fact is often unnoticed.

Put a weight hanging over the cord, make sure the body is standing straight. What you'll find that only the body tilted towards the right. In this case, adjusted by the thickness of the right side of the thigh.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Adjustment is over, now stand properly. Weight and the way this string is fastened to the curtain that had been captured in the back into (-;)

The unadj

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


How to make a doll 14 - Shine

Used to prepare the eye of a favorite doll before polishing. This is a homemade eye.

Tsu clay to the back of the eye through the hole in the neck to eyeball Kuttsukemasu. Glass is the case of a lump of clay to put a finger on it stuck to the glass eyes, Just by inserting the eye hole and secure it to come down to the clay around the glass eyes. If it were not really easy but it had gone to get fixed please the eye while i put my head broke. Cliff or paint from the filing or later The surface of the eyeball must Masukinguzoru 貼Ranakere and masking tape. It becomes hard to handle and I masked around the eyes, I recommend putting the eye at the end.

Once the depth position of the iris and the eye itself, and dry eyes that hold the clay. Dry eyes and disconnect. Base of the eye was addicted is the guide into the eye before finishing at a later time.

The following were divided Gemasu head. Make part of the boundary clay Tsu.

Align your head, pushing Kuttsukemasu. Prepares to leave the beautiful from the outside seams.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonés a inglés con Google. Coprolito@gmail.com


When you come to after the fillings here are the details. Assembled to see the doll looks rough.

Once the paint can not fix it, sticks to the detail as possible. I also taste good and asymmetrical face, or I think, Can become very concerned about the view from the place and Asymmetric time. Similarly, the asymmetry is not used to seeing from the perspective of others would soon know.

I can not just looking for a chance to look so rough, I put a fix in red pen to print pictures of folded. Put your left at the time of actually fixing the picture above. This time it was coming nicely subtle knee joint has become O legs. Fixed by adding the clay to match the blueprints.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


As a modification of the figure will be fixed. Justified in the place where care of the details that I The depth of the groove - the symmetry of the rubber part where there are no changes to the recessed surface of the joint by the symmetry of the hole (exterior), turn the sharpness of the ball joint symmetry symmetry symmetry condition (such as thighs or rise to the same angle) Left and right hands, the length of the toe, the base of the sphere symmetrical arthritis of the width, or when there are no uneven ball stuck And so on.

Changes in three stages. Because it was stretched a little shorter than the knee blueprint imperceptibly. Had small hands for a little bigger then. I changed nothing! ? Justified even if the details change but at first glance there may be important is the feeling ... Can afford to be seen as the real thing up close, Make sure to fix the rough as much as possible in the nude.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Next, in order to clean the surface of the part Clay Cross Apply to. Paint brush to use when there is something bigger than leaning. Prepare the brush into consideration the cheapest is fine.

Clay Cross The contents of the. Kurosukurei appears to be dissolved in water Radoru, Substitute something completely different, so actually I think better not. Kurosukurei mud is like you compare. It's not a formative force in detail, will help to fill a small dent.

Clay Cross For another container, use about 40 percent bond mix. The remainder of the paint ball will have a ball joint.

Hook a wire to wire in the form of this Part â&#x2C6;Ť. With a wire, painted the last part of the ball. I'm surprised that so rash, I erase everything all right later.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Parts of the head, bent the tip of the wire, S Hook in the head office to pick up cans. Kurosukurei painted face and head intact, painted the place by the end of the neck.

It is a good idea to make a book or something.

All hanging to dry.

Dry, the Suponjiyasuri Fine Rash to dismiss the polish. Scrub. So many beautiful polished grain is left on the surface. To polish the back of the ears and between fingers and toes, use the sandpaper # 400 of fabric. Used to polish the fine details and easy to fold up.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Polish all the work by making clear to all. Out when the thickness of the base coat after this, it becomes from entering the joint. You have to make sure it is working. But actually I do not like is the best ...

I made clear in the thigh by. You have to work with room to spare.

After the cut before cutting right to left toward the left What is the difference between know how to enter the sphere ... Create a clear feeling about this. I think the place is really clear how much trouble is this I wonder if I'm thinking about the construction paper into two pieces. Please apply if you need a little more ー thick oil paint. Coating thickness can be adjusted in the ground for too much time, I've probably made a lot better. Please consider the thickness of the cloth to put under it later.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonés a inglés con Google. Coprolito@gmail.com


Adjust the knee Imasu a pretty damn clear. If you've not correspond to if the effect is larger. (Okay but the other joint protruding ball around a bit, A bad knee to knee and can not be independent Garanaku and not just the joints) Hate is the reason for the difficulty of coordination in this area. 。 . 。 .

All polish, cause was buried in the details carved Kurosukurei. Limbs and claws, and double lines. Chisel the smallest guy in the picture is of a triangular blade. One side of the blade about 2 mm.

Become slippery surface. Using this tool Suponjiyasuri And superfine 、400 on cloth filing, chisel It is.

Suponjiyasuri the one you have bought one by and keep together enough to make a doll. But strong and very useful because it immediately back to the powder in vacuum I Re. Too easy to polish the surface rather than worry about numbers and use of sandpaper, Suponjiyasuri set

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonés a inglés con Google. Coprolito@gmail.com


15 - How to make a doll base coat

This groundwork beaten chalk is used. Chalk is sold in Yuzawaya beaten. When there is if you think they'll put in order. When found in the modeling paste can be substituted. In that case, modeling paste 6: Create an agent base in Jesso + qs water. Not enter the bond.

Has been opened in this way.

Mix well. (Whiting stock, but freshly isolated may not, even if it is used to mix well)

In this way we will finish with the skin intact on the substrate. The use of color is Holbein watercolor. You can try putting a strange color I like to make a green hue. Instead of putting a little blue and green colors will calm adult moist. At this time, please do not put white absolutely.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


This is mixed with the formulation above.

The vessel transferred to another whitewash 50cc, stir well and adjust the color of the watercolor. I would just come floating color mix well, and mix well. Try to fill newspapers and try and make sure that the color of the skin becomes perfectly. Instead of white paint mixing too much concentrated in Thin chalk. No longer act as the base rate is low and they mixed with white chalk.

Thin skin was chalk addition to 15cc of water. Since this is the measure when I make this, May vary seasonally. (記録時は夏季) (When recording in summer) Try painting a newspaper, it's a good depth of character is much lower too dry and opaque. Please skip the water becomes too thin to understand it. After adjustment, put about 20% of the total amount of bond. Put a bond, and mix well. Tara, leave to remove a chunk of bonds, etc. Shi tea strainer. This colored chalk to make the water around 50cc + 15cc 5cc + Wed making a total of about 70cc. SD-sized dolls (60cm long) is exactly the amount you make it.

Shine fine custom parts, keep well and wipe firmly focused Sarashi.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonés a inglés con Google. Coprolito@gmail.com


Will descend quickly paint a wide brush. Kurosukurei painted in the same way when ...

Changes the size of the brush part. It seems to place the crushed face painted details such as the least.

Also painted the inside of the joint groove.

The sixth part of all coats. The paint is dry paint to dry ... but, During the first part of the waiting time to cycle through the parts are dry, so I think there are very few. Along the way, so I think the water comes through the chalk of the container, adding water while you work.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Chalk remained only slightly. It may be later polished bald at the base, Set them aside for repairs over the lap.

Here is not to slow. No mood to get dry enough to touch the parts of the chalk, The Suponjiyasuri Fine 縲《uperfine ( (For details) erase the handwriting on.

Sarashi spray to moisten and ...

Erase traces of polish in the filing that Sarashi. This further reduces the shine worn painted stacked securely. If yours is peeling off the base, then took a re-painted with whitewash and brushes the same way again. Will be really hard to polish that they are completely dry and chalk. I think 12 hours is better polished.

If the details are gone and buried nails and eyelids, Keep in the wake carving chisel. You are now basic color of the skin. How many days like this one hanger Keep hanging on to dry completely. Last pastel coloring, oil paint, even when using the acrylic base is common to all. Coat of whitewash is a large block of time need work. It is a good stretch and go through your days off.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonテゥs a inglテゥs con Google. Coprolito@gmail.com


16 - How to make a doll and make-up coloring This goes oil finish. Oil finishes are familiar with because it requires subtle Early in the first look on! Who I will make drawing is recommended. Paper pallet (size small, so always use only one part) Cosmetic sponges , various oil paint, Penchinnguoiru, Brush (paint brush and eyebrows and paint brushes and mixing of the oil scoop fine point brushes ) Prepare. Cosmetic sponges are common in Matsukiyo selling. Fresh paint that I use mainly Aiborihowaito, shell pink, Burnt sienna, etc.. (Flesh, bland colors, pale pink, brown) Slightly different color, so even the same color as the company name, I bought the company and to separate the desired color ... Dissolve the oil must be careful because there are things Tekaru after drying. Quick-drying oil beaten most dangerous things Tekaru.

Aiborihowaito out appropriately and shell pink and fresh.

Mix. Is reddish color of this base. (The following is a basic red and said Kore) (Can I just use it to buy a coral red color)

Ino Tsuyoshi and redness at the lips, I made a mixture of brown and flesh.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


The basic description of the use of red skin. Gray left, the right is made fresh on the subject of red. Bluish red, left, right is yellowish-red. It is incomprehensible that the red or blue, but is that red and orange leaning closer to purple red. Both, the atmosphere will be finished in the red as something completely different. The image seen through the light-skinned like Rose Grey (Snow White, you compare, like a vampire ...) Healthy skin or in the Asians are good fresh color. The bluish gray if Rose will wear clothes, If using fresh and suits based humor, such as yellow or orange yuan. It is useful to distinguish the reddish know. I may have to be aware of it from the whitewash paint stage.

It is now my makeup sponge is to use this. This photograph was taken several times after using ... Others use the far left corner is wearing a red base directly. Bottom right corner, use a brush to moisten the Penchinguoiru put. Right corner of the half and half is covered with oil paint. Create subtle gradations of three by different angles.

First, Apply oil to put in place at the corner to put out a red oil.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Lightly wipe the oil portion of the half and half.

Rubbed the corners marked with paint color.

Adjust the angle of half and half color. We will put all the colors like this.

Areas of shadow, we will base on the red 擦Ri込N recessed portion.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonés a inglés con Google. Coprolito@gmail.com


I think that's too red to put Sorerashiku joint junction.

The face first into the shadows around the eyes.

Then draw an eyebrow. The hair color is a good fit.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


So your eyelashes. More easily be drawn to draw upside down. I think that's vividly painted in light pink and then the edges of the eye.

The position of the eyebrows, Eyebrow straight starts from where it reached the edge of the nostril. End of the eyebrow is a good balance and get into the nostril and eye area signed a slash. The women make sense of that (maybe) and I, The doll, so I figure a good reference level.

Apply a basic red cheeks too. The gradient Riyou Kaname put a sponge ... Cute baby cheek red and the bottom up. I also cute, so I had a pretty doll in red.

Painted lips. At first I tend to thin upper lip, I'll draw cute Poku and Mt. I think that your lips and so is the steep slope of Mt Rashii Potetsu. Lip plump to be sexually attractive and Fuji.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Make sure to try putting the first image. If you put your eyelashes are easy to do before putting more eyes stuck. 。 The eyelashes on the market is even better, you can also make the lashes from the brush. Soft, natural finish is recommended so. The last complete picture grows eyelashes. 作り方はDollybird Vol.9 The recipe is Dollybird Vol.9 I make reference to the method of Araki's Taro Hazime.

If you buy mail order and the hair, eyebrows always come from the Draw ... 。 The different colors or are expected to draw. (Already twice about doing that). ☆ ☆ ☆ important point about the color of the eyebrow Eyebrows, next to the side of the face and neck when carrying the hair "Hair is a shadow" color to match. Ito Susuki will to make it match the color of your hair in place look bright. ♪ Oke, so when in doubt be sure to match the color of the shade, please try ♪ It was a little lighter this time eyebrow hair, so pale a bit. As a special eyebrow color to black or gray hair, I guess ... In the mood light shine but do not want black people to light gray. It may be time to make the color white 混Zetaku eyebrows I feel so good Ranai white mix colors more if possible. Eyebrows are major parts of the face!。 I put a spirited draw.

Red painted red base junction also other joints.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonés a inglés con Google. Coprolito@gmail.com


Favorite color is put on your nails and toes too.

It takes oil paint to dry for approximately one week. Keep hanging to dry. The quickest way to dry and airy place.Note the dust!

Dry, and attach the cloth to all joints receiving part. Worn-out underwear and cloth is fine. Smooth movement of joints and can put a cloth doll that is difficult to damage. Cut the cloth to get the size of the first ...

Cut in two by folding down the middle, and paste in the bond. Give care to see from the table cloth.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Once, as a complete assembled at the temporarily assembled. If painted in oil paint, you may be exposed to black metal traces. Silver rings, and watches to look for the doll away.

This doll is complete with a wig so Katsuradoru covered! Making dolls has also done many times Kinaku, It was fun because I think what the creative process. ♪ ♪ Please, try making a doll come to the only one

Glass extra ver.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonés a inglés con Google. Coprolito@gmail.com


16 - How to make a painted doll and make use pastel colors

Using pastel colored way. Clear part of color in watercolor Wait a little paint will. Originally part refers to the Scarlet painted in pastel painting in cosmetics, so I'm no hand ... This is a powder blush.

The colored portion of the color watercolor. The drawing will be pointing to red body.

Refers to the red and realistic feel to the junction of the joint. It is a little hard to see what this picture ....

Put your nail color as well. It is painted in light colors like red nail polish you very much.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Draw the eyebrows. The eyebrows are pretty good at eyebrows and slender, Drew more looks pretty thick. From the face will become clear. The first drawing in pencil below. Beginning of the eyebrows is a straight line from the extended position from the edge of the nostril. Leshan is around the outer edge of iris. This time I'm drawing a bit longer. length of the eyebrow is like the eye area and tied into the shaded edge of the nostril.

We will draw one by one with the pen looks. Below is a pencil drawing, I think not erase be visible strange.

Points to the red cheeks. Cheek says that refers to the part swells smiled, I can not get the doll refers to smile properly, so not sure on my face. Cute kids on the cheek is red and looks like from the bottom of the cheek.

Also points to the red mouth.

Draw sharp lines and double brown.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Spread the brown water to dissolve. So your eyelashes.。 I think a good look inside painted in red a little. I will put it out because no scary eyes When colored with oil paint, please make sure to remove the eye.

Make-up like this. This was not too much dark makeup. It is pastel color transfer does not have to rub terrible. If you are concerned about the discoloration to finish "Mr. Super Clear spray matte UV cut" would be better to blow. Beginning and end of the blowing wind out of the doll body, Finish neatly divided into several times in large quantities at a time Ki Kenai. Tsu clay to secure it from the hole to put the eye makeup is done in the neck.

Before assembling, put a cloth to keep part of the joint by all. Put a cloth that can prevent the damage the joints. Put a cloth is fine and worn cotton underwear. When not correspond to take off when stuck, and attach the cloth to cut down on it by the sword round. I think that suit is a last resort if it does fit. When assembled as a temporary assembly.

This child is now complete with a wig so Katsuradoru covered. I enjoy taking pictures of the doll move, please have fun with a variety of poses. You may face unexpected show us photograph.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonés a inglés con Google. Coprolito@gmail.com


17 - How to make doll hair stick

Provide commercial Doruhea. Suga Doruhea shall become the thread (slightly twisted silk thread used to form Japanese) Dattari, And rayon plant, and animal fibers. (Used to dye or tea) Some commercially available human hands after using the hair is too high ... In what can match the shine and texture of human hair, but It is enough if the market Doruhea Kodawaranakere so.

Doruhea comes in bundles. Carefully cut the yarn bundle, the bundle will remain so. A small amount of hair from the middle of Ke Ri Doruhea a bunch in one hand, Disassociates with one hand firmly on how to divide again. I wish we did not become a mess in this manner.

Cut the desired length, it rests on a plastic bag or plastic wrap to spread. Put a bond on the edge, spread the spatula spatulate. To avoid a bunch of thick hair! Can only come from inside and bond rose up from entering the thick bundle Then they made the strange bulge after a stuck head.

同We make the same dry.

Draw the first place to make a doll head split.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonés a inglés con Google. Coprolito@gmail.com


Draw the hairline.

So your back.

Graver crisis in the area drew Rimasu earlier. Would be easy to drill holes in the sword of Guriguri roughly carved a sword from a corner. Dividing line should be left open hole section significantly. Hair stick people fail because many parts of the small hole about parting, This point is important.

Provide a stable and plastic bottles. Shoe boxes and tea in my case ... It is better to use plastic bottles filled with water to spare.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Place the doll's head. Across the tissue in case I scratched on the bottle neck.

Bond takes Doruhea solidified. I bond is removed with scissors sticking out, cut edges align.

We will stick from the bottom.

So much the amount of hair strangely little too close together, Gradually going to put a good distance while watching ...

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Passed a little close together ... We will see how to put Nagaraji Yonjon.

Rino Amane glued to the dividing line.

Prepare a thick Doruhea minute thickness of the hole. I may wish to prepare on the length of the hair longer than normal. Bond put into the hole. Ideally, I stuffed the hole Doruhea state. Scalp and the bond will be seen when he made a split second too lean.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


To explode violently.

To prepare a parting, cover your head with a network for people keep dumplings. Net surprisingly dumplings can be used.

Settled.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


The following is a cut!

Tissue covered with scratched off when it hit the face with scissors. Please do not cut it may be the best course ...

Having failed to cut as expected, we perfected the brown hair. Depending on the amount of hair is used to depending on the length of the doll hair. Measure the length of their hair, put a head line drawing is good if you have a bunch of long hair plus minutes worth of it plugged into my head. The amount of hair is inserted into the last stitch is fundamental to stop "seeing" one minute if width. Please do not ask to hear, because it upsets me too much hair on my dolls (sweat)

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


how to make doll hair mohair If you are stuck with mohair hair, fluffy hair that can be easily.

This is a platinum blonde mohair. At this rate, try beige pink dyed white too.

Out the skin color of black tea and onions. Since onion yellowish to reddish black tea and just. Put salt on the color stop. After so much use Shi mixing with waste.

Simmer one minute put the mohair.

After taking out a little water.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Kasanai directly in dry.

Now something like this. The color of white people left before the dyes. Try a small amount in advance, there is no such failure to decide the time and the concentration of dye. (If you have bought a lot at once platinum blond mohair, Can be useful but I can use what color to dye! )

Posted this in mind next mohair.

You have made a first portion of a hair whorl. About 10cm off the mohair.

While we roll sewing thread of the same color.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Hair whorl could.

Try running, check to keep a proper Ppoku hair whorl.

Keep plugging holes toward hair whorl of the head. About 1cm in diameter.

Provide a bond with what little water.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


To provide a stable, also create a stand at the neck. This is an acne cleansing foam containers ... 40cm dolls are these things so much plastic bottles from entering the hole in the neck (*_*) Recently, I stand doll stand posts. I entered the stable and useful in any size (^_^)

Spread the bond will put the back of the head.

We will stick round and round like this.

Second round.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Have buried Japan.

As well as possible and attach the last round.

Painting the hair whorl hole bond Then you plug in the hair whorl. Let soften hair and other hair whorl open.

The hair whorl was not fit, place a cloth to rely on iron.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


If you like the cut and bangs. Prepares to put a hair dressing.

Mohair so contagious, it may be wholly covered by nets to keep her hair. And dry from the spray dryer to this calms down considerably.

Now something like this.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


18 - How to make a doll body how to make division

The fuselage split. Although the stomach or even egg-shaped or even spherical Description of the oval. How to make roughly the same even if the sphere. 65mm seems to fit the fuselage above and below hemisphere.

Make plaster casts of the hemisphere in 65mm. 。 You have made a little thicker on.

While the body's balance makes the balls put in a heavily modified Yaikenakunarunode Shinaki splitter. Draw the dividing line is in good shape, my favorite color so complicated we think. You have to match the height of the left and right edges.

Disc saws and cut-type router. It is hard to cut with a utility knife ... Radoru Remasu comfortably in a hard disk that diamond bit. It is okay not to correct them later, so pretty much cut off too.

I get the 65mm ball made of course but should have been squashed. ! I use it sometimes is useful!

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonés a inglés con Google. Coprolito@gmail.com


The middle part of the divided part of the stomach. Thinly carved into the inside front of the ball. Aims to cut the feeling fit and cut on the side of the hemisphere ... I'm off the mountain at the back side after the split. Side view illustration . Cut the red dotted lines.

Kuttsukemasu stuffed with clay.

。 Now the knee.

Gemasu also gently back.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonés a inglés con Google. Coprolito@gmail.com


When I cut into shape much later, leave the clay lining. The rest of the inside of the ball the whole ...

Stripping Kashitara sticking part. If you had to cut the ball back would at this time. Is it safe to cut the ball I'm making it thicker.

No longer bulge.

Fill in the uneven soft clay.

The back side of the mountain down.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Give the ball to the stomach area like this.

Lined with clay from the inside of the body, Kuttsukemasu the ball.

It's such a feeling before the upside.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Kashitara fill the uneven shaving.

Make receiving part while filled dry clay. Clay on the inside back part of the prime, 65mm make joint by pushing the ball. 。 Were half as the ball enters, shaved around the back part of the buttocks.

Correct place when you were getting jagged split ... On average but can be nice to go round.

The gap Tsumemasu clay. Stripping has become part of thick dry later.

I like a good idea to stand out in front of the ball.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonés a inglés con Google. Coprolito@gmail.com


Also make part of the chest so as to get exactly the same.

I quickly dry brush my stomach area.

Try lightly hit by the dry parts of stomach. Try to move round and round, and dry.

In the part sticking Shimasu Suponjiyasuri completely dry.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonĂŠs a inglĂŠs con Google. Coprolito@gmail.com


Now something like this.

Please take the long range of movement to the side and back side of a mountain of mountains below the ribs. May result in damage to the lateral force when bent. 。 Were probably safer not worry so long. I want to be treated with care, so much like this.

This is because after the ball through the wire. Part of the blue line. Please Drill holes through the wire was in place could very well break the hemisphere. Through the front rubber. Hole through which the rubber round the upper and lower part of the lateral grooves. I like hole in the lower bank. The shape of the rubber through [/ \] instead of [| |] is a strange turn in the direction of the thigh and pass and so on. Hole locations, please consider along with the plans. Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonés a inglés con Google. Coprolito@gmail.com


19 - How to make a doll how to make a finger joint

About the finger joint has been like this. It is just so hard to wake in the text. … Sorry ...

The plan looks like this ... Determine the size of the beads used wood. Hooks for clothes are fitting in the lower right.

Holes in the center of wood beads, Put a metal hook for clothes made to bend and thread the needle. Both sides instant adhesive Reattach on. Joint drill a well to ditch the other wood beads. With a good idea. The second joint of the finger base and how to cut a little different because of the groove, Please refer to the description of the first image.

Give the ball to each part of the finger. Re-screw the ball in good drying glue dries. Rubber is rubber used for the fine craft beads. You can also use the small finger joints, so no extra thickness than those covered with a cloth.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonés a inglés con Google. Coprolito@gmail.com


、 In passing the wire inside the back of the hand, I concluded from all the fingers of rubber there.

Interesting about the knuckle have various facial expressions.

We made a 1 / 3 Doll knuckles. I feel that this is a minimum or consider making the ease.

By the way, when you finish a toothpick pointing to manage one by one so as not to fall apart! Finish a little bit tougher than making (-_-;)

☆ recommended way to create eye-loop end-use

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonés a inglés con Google. Coprolito@gmail.com


Fasteners made of plastic sack (end loop) you can buy.

Sack fasteners (end loop) is the image that I attached a place like this. The fine is sold everywhere, Shinjuku Okadaya was Toyotomi size.

This is a good place is a hole originally Teru Tokoro. Not too big a hole will be whittled to use only a few large sandpaper. I see what I bought but I know better, please make sure. My tack paste painted iris, lens and attach. Anti-reflective coating on the bottom of the lens from behind Remasu easy! Is not an anti-reflective coatings and paint so as to not serve, so quite some Or even had to be easier to cut and paste from behind small acrylic hemispheres. (Note the bubbles) Or you can just paste hand edge of the lens (Total internal reflection, but when viewed from the side.) I like good or black paper and embed it back later.

Voila ♪ Budai fasteners problem is somehow odd in diameter. Iris / white = 1 / Yarimasu odd in that the diameter of the two laws I feel a little bad.

Intarioai (carving eyes) How to make Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonés a inglés con Google. Coprolito@gmail.com


The original approach is to use eye Bisque Doll. In that case made and will look to carve into the eyeball. It is still good, well make the curve of the eye so hard, I think it's easier eyeball into a ball. Pearl beads with white beads on the market to draw a black eye around the hole in the magic beads. According to the line, we will cut by chisel from outside to inside. I'm going to feel cut lines to remain.

Rimasu concave cone shape towards that hole. The depth of your choice.

Place the white color of acrylic paint directly. Beads in the hole too, thin brush with black paint.

。 Apply a clear coating on the surface. Svnversion lens. This is ready to serve.

The eye's lens that I think (laughs)

Baremasu the lens is not viewed from the side ...

When I look in its own way as the first use. This method makes the first, but I think showing how to draw the iris plant.

Fuente: http://www.linkclub.or.jp/~oshizaka/doll/howto/index.html

Traducido de japonés a inglés con Google. Coprolito@gmail.com


Muñecas Dollfies - Manual