Page 1

e mounted constant current LED driver. Targeted at both dynamic full-colour and white lighting

ious control protocols: it can be set up as one to four DALI ballasts for general white lighting or as

rtainment. POWERdrive - Beyond Colour.

• Façade lighting

• Retail display lighting

aller standalone installations that require dimmable, high-power full-colour static or dynamic LEDlighting lighting. POWERdrive AC is DALI, DMX/ e lighting • Input Façade lighting • Decorative

colour architectural lighting nd LedSync compatible.

• Retail display lighting

• Voltage: 120 - 277 VAC • Current, max: 0.7A

ures & benefits ications

rtainment lighting

age: 12 - 32 VDC e lighting

ent, max:

colour architectural lighting

WERdrive 45D: 2.2A

• Frequency: 50/60Hz

• Signage / advertising lighting

Output

• Façade lighting

• Voltage: 55V typ

• Retail display lighting

ures & benefits

WERdrive 180D: 6.16A

• Full-colour / tunable white applications • Decorative lighting

• Current range: settable from 200mA to 1,050mA

WERdrive 90D: 4.62A

for each LED output separately • Power: 50W max

ut

age: 11 - 31 VDC (Vsup - 1V) ge: 120 - 277 VAC

ent range:

General

ent, max:

• Power factor: > 0.9

t 120V/60Hz

• DMX / RDM and LedSync compatible

at 230V/50Hz

• Hybrid HydraDrive: efficient, smooth and flicker-free dimming

WERdrive 45D configurable from 200 - 500mA

WERdrive 90D configurable from 200 - 1,050mA

WERdrive 180D configurable from 200 - 1,400mA

• Full dimming control: 100% to 0%, choice of linear or logarithmic dimming curve

• Full-colour / tunable white applications

uency: 50/60Hz

• General white lighting

Aer:at45W, 277V/60Hz 90W, 180W max

6060/R

ble LED Driver

uts. POWERdrive’s dynamic response can be tuned to fit any use case - from exceptionally smooth

Features & benefits

Rdrive AClighting is a constant current LED driver with multiple LED outputs over four channels. It is targeted at larger networked rtainment • Signage / advertising lighting that are controlled • Full-colour / tunable white applications

• High efficiency over a wide power and voltage range:

al

89% at full load, ≥ 85% above 67% load tI, USITT DMX512A / RDM (explore & address, ANSI E1.20) and LedSync • Maximum (rated) power compatible available over wide LED voltage (30-55V) and

raDrive: ge: 60V15-bit max,resolution 57V typ

LED current range (200-1,050mA)

mingrange: control: smooth dimming 100% 0.1%, gamma-corrected curve ent configurable fromfrom 200mA toto1,050mA

efficiency er: 100W max

• LEDcode/NTC interface for robust thermal management

• Programmable with TOOLbox pro and FluxTool software via DMX/LedSync current configurable for each output separately

tive 3-button user interface for on-the-fly configuration

al

face for external control device: 10kΩ potentiometer, 0-10V source or momentary switch

er factor: > 0.94

,interface DMX/RDM and LedSync compatible for robust thermal management

id HydraDrive: 20-bit resolution

Product offering

Description ming control: smooth dimming from 100% to 0%,

ce of linear or logarithmic dimming curvePOWERdrive AC, 50W, DMX, 3 control channels, constant current, 3x 60V LED outputs, square metal duct offering

efficiency over a wide power and voltage range: POWERdrive AC, 50W, DMX, 3 control channels, constant current, 3x 60V LED outputs, square metal/plastic iption Product Order no. at full load, ≥ 87% above 50W output POWERdrive AC, 50W, DMX, 4 control channels, constant current, 4x 60V LED outputs, long metal Rdrive DC, 45W, DMX/DALI/0-10V, 4 control channels, constant current, 4x LED outputs POWER 45D PWR045D2 mum (rated) power available over wide LED voltage (30-60V) and LED current range (200-1,050mA)

Rdrive DC, 90W, DMX/DALI/0-10V, 4 control channels, constant current, 4x LED outputs

POWER 90D

Rdrive DC, 180W, DMX/DALI/0-10V, 4 control channels, constant current, 4x LED outputs

POWER 180D

current configurable for each output separately

ive 3-button user interface for on-the-fly configuration

AC Series

wMaster: 9 default shows, up to 20 user-defined shows, uploadable via TOOLbox and PC software

Product

Order no.

POWER 562/S

PW0562S1

POWER 562/A

PW0562A1

POWER 561/M

PW0561M1

PWR090D2

PWR180D2

face for external control device: 10kΩ potentiometer, 0-10V source or momentary switch

code/NTC interface for robust thermal management eldoLED. All rights reserved. V4.2

More product All documentation and eldoLED’s available at www.eldoled.com. © 2012 eldoLED. rights reserved. V3.3 terms and conditions are More product documentation and eldoLED’s terms and conditions are available at www.eldoled.com.

wMaster: 9 default shows, up to 20 user-defined shows, uploadable via TOOLbox and PC software

LED Steuerungstechnik

uct offering

ption

Product

Order no.

Rdrive AC, 100W, DMX/DALI/0-10V, 4 control chann, const current, 4x 60V LED outputs, long metal/plastic POWER 106/A PWR106A1

Rdrive AC, 100W, DMX/DALI/0-10V, 4 control chann, const current, 4x 60V LED outputs, square metal

POWER 106/S PWR106S1

Rdrive AC, 100W, DMX/DALI/0-10V, 4 control chann, const current, 4x 60V LED outputs, long metal

POWER 106/M PWR106M1

Strom und Spannung in Perfektion Stand 03-2013

eldoLED. All rights reserved. V5.0

More product documentation and eldoLED’s terms and conditions are available at www.eldoled.com.


Datasheet SOLOdrive 561/M, 561/S, 561/A

AC Series

50W 0-10V Dimmable LED Driver SOLOdrive 561 is a 0-10V dimmable, constant current LED driver. Dimming is beautiful - smooth all the way down to 0. Its two LED outputs offer the possibility of driving a very high power 50W LED array connected to a single output, or driving two strings of 15 LEDs at 350mA. SOLOdrive is programmable to suit a wide application area and LEDcode allows easy extension of the SOLOdrive’s feature set with time, motion and brightness based intelligence.

Applications • Office lighting

• Hospitality lighting

• Retail lighting

• Next-generation ‘T5’ luminaires

• Low Bay lighting

• Public area / park / street lighting

• Architectural lighting

• Signage / advertising lighting

• Display lighting

Features & benefits Input • Voltage: 120-277VAC • Current, max: 0.7A • Frequency: 50/60Hz • 0-10V dimmer input

Output • Class 2 LED outputs (x2) • Voltage: 55V typ • Current range: settable from 200mA to 1,050mA for each LED output separately • Power: 50W max

General • Power factor: > 0.9 • 0-10V compatible (IEC 60929 Annex E). SOLOdrive 561 is a current source driver, compatible with both current sink and current source controllers. For a list of compatible 0-10V dimmers, please visit www.eldoled.com/compatibility Note that the driver’s 0-10V interface is not insulated from the LED outputs, meaning the insulation class (basic or double) of the dimmer will determine the final insulation class of the LED outputs. If the 0-10V dimming signal is only basic insulated, LED outputs are considered ELV (not SELV). • Hybrid HydraDrive: efficient, smooth and flicker-free dimming • Full dimming control: 100% to 0%, choice of linear or logarithmic dimming curve • Highly efficient over a wide power and voltage range: 89% at full load, ≥ 85% above 67% load • Maximum (rated) power available over wide LED voltage (30-55V) and LED current range (200-1,050mA) • NTC interface for robust thermal management • LEDcode: programming interface (LED output current, NTC temperature, dimming curve, minimum dimming level) and sensor/extended feature set interface

Product offering Description

Product

Order no.

SOLOdrive AC, 50W, 0-10V, 1 control channel, constant current, 2x 60V LED outputs, long metal

SOLO 561/M

SL0561M1

SOLOdrive AC, 50W, 0-10V, 1 control channel, constant current, 2x 60V LED outputs, square metal

SOLO 561/S

SL0561S1

SOLOdrive AC, 50W, 0-10V, 1 control channel, constant current, 2x 60V LED outputs, square metal/plastic

SOLO 561/A

SL0561A1

© 2012 eldoLED. All rights reserved. V3.4

More product documentation and eldoLED’s terms and conditions are available at www.eldoled.com.


Datasheet SOLOdrive 561/M, 561/S, 561/A

AC Series

Dimensions, weight, packaging SOLOdrive 561/M

21 mm / 0.83”

436 mm / 17.17”

• Weight: 360 g, 12.7 oz

ø 5.0 mm / 0.2”

• Packaging: 4, 10 or

29.9 mm 1.18”

SOLOLdrive 561/M

40 pcs/carton 444 mm / 17.48”

SOLOdrive 561/S

ø 5 mm / 0.19” (M4/M5)

118.8 mm / 4.68”

• Weight: 350 g, 12.35 oz • Packaging: 6, 10 or 45 pcs/carton 66.4 mm 2.61”

76 mm 2.99”

130 mm / 5.12”

SOLOdrive 561/A

118.8 mm / 4.68”

• Weight: 372 g, 13.12 oz • Packaging: 6, 10 or 45 pcs/carton

30 mm / 1.18” ø 5 mm / 0.19” (M4/M5)

SOLOdrive 561/A

66.4 mm 2.61”

76 mm 2.99”

152.5 mm / 6.00”

30.1 mm / 1.19”

Connections Connectors

Wiring

• LED outputs: + and - (x2)

• Cross section: 0.5 - 1.5 mm2, AWG 20 - 16

• LEDcode / NTC: + and -

• Strip length: 9 mm / 0.35 in.

• 0-10V: + and • Power: Line, Neutral and Ground

LEDcode configuration • USB-LEDcode interface: TOOLbox pro (part number: TLU20502)

• FluxTool software: for Mac and PC freely downloadable from www.eldoled.com/fluxtool

Other information Certifications

Environmental ratings

• CE

• Ta range: -20°C...+50°C / -4°F...+122°F

• IEC 61347, IEC 62384, EN 55015, EN 55022,

• Tc max: 85°C / 185°F

IEC 61000-3-2, IEC 61547, IEC 60929 Annex E

• For use in damp and dry locations

• UL: Recognized Component for US and Canada (file no. E333135), according to UL1310 and UL8750. US: Class 2 output. Canada: Non-Class 2 output. (SOLOdrive 561/M pending)

Control compatibility • Standard 0-10V wall mount dimmers and switch controls

Europe, Rest of World

North America

Other documentation and support

eldoLED Europe bv

eldoLED America, Inc.

Visit www.eldoled.com/ACsupport for further documentation such as

Luchthavenweg 18a

1762 Technology Drive #226

quick start guide, wiring diagram, tech sheet and 3D IGES files.

NL-5657 EB Eindhoven

San Jose, CA 95110

The Netherlands

USA

T: +31 40 2054050

T: +1 408 451 9333

eldoLED represents and warrants that for a period of 3 (three) years, as

F: +31 40 2054058

F: +1 408 451 9335

of the date of invoice, Products materially meet the specifications and

Warranty

specifically agreed upon quality, both as stated in the applicable datasheet and/or written design-in specifications, or as stated in writing otherwise by eldoLED, provided that these specifications are explicitly Sales support EU & Rest of World: sales@eldoled.com

designated by eldoLED as "warranted specifications".

Sales support US/Canada: nasales@eldoled.com

For the complete warranty text, visit www.eldoled.com/terms.

© 2012 eldoLED. All rights reserved. V3.4

More product documentation and eldoLED’s terms and conditions are available at www.eldoled.com.


Datasheet SOLOdrive 560/M, 560/S, 560/A

AC Series

50W Dimmable DALI LED Driver SOLOdrive 560/S is a DALI compatible, constant current LED driver with two LED outputs that are controlled as a single ballast. Dimming is beautiful - smooth all the way down to 0. SOLOdrive is programmable to suit a wide application area. Its two LED outputs offer the possibility of driving a very high power 50W LED array connected to a single output, or driving two strings of 15 LEDs at 350mA. LEDcode allows easy extension of the SOLOdrive’s feature set with time, motion and brightness based intelligence.

Applications • Office lighting

• Hospitality lighting

• Retail lighting

• Next-generation ‘T5’ luminaires

• Low Bay lighting

• Public area / park / street lighting

• Architectural lighting

• Signage / advertising lighting

• Display lighting

Features & benefits Input • Voltage: 120 - 277 VAC • Current, max: 0.7A • Frequency: 50/60Hz

Output • Class 2 LED outputs (x2) • Voltage: 55V typ • Current range: settable from 200mA to 1,050mA for each LED output separately • Power: 50W max

General • Power factor: > 0.9 • DALI compatible (IEC 62386-101/102/207) • Hybrid HydraDrive: efficient, smooth and flicker-free dimming • Full dimming control: 100% to 0%, choice of linear or logarithmic dimming curve • Highly efficient over a wide power and voltage range: 89% at full load, ≥ 85% above 67% load • Maximum (rated) power available over wide LED voltage (30-55V) and LED current range (200-1,050mA) • NTC interface for robust thermal management • LEDcode: programming interface (LED output current, NTC temperature, dimming curve, minimum dimming level) and sensor/extended feature set interface

Product offering Description

Product

Order no.

SOLOdrive AC, 50W, DALI, 1 ballast, constant current, 2x 60V LED outputs, long metal

SOLO 560/M

SL0560M1

SOLOdrive AC, 50W, DALI, 1 ballast, constant current, 2x 60V LED outputs, square metal

SOLO 560/S

SL0560S1

SOLOdrive AC, 50W, DALI, 1 ballast, constant current, 2x 60V LED outputs, square metal/plastic

SOLO 560/A

SL0560A1

© 2012 eldoLED. All rights reserved. V3.2

More product documentation and eldoLED’s terms and conditions are available at www.eldoled.com.


Datasheet SOLOdrive 560/M, 560/S, 560/A

AC Series

Dimensions, weight, packaging SOLOdrive 560/M

21 mm / 0.83”

436 mm / 17.17” ø 5.0 mm / 0.2”

• Weight: 360 g, 12.7 oz • Packaging: 4, 10 or

29.9 mm 1.18”

SOLOLdrive 560/M

40 pcs/carton 444 mm / 17.48”

SOLOdrive 560/S

118.8 mm / 4.68”

• Weight: 350 g, 12.35 oz

ø 5 mm / 0.19” (M4/M5)

• Packaging: 6, 10 or 45 pcs/carton 66.4 mm 2.61”

76 mm 2.99”

130 mm / 5.12”

SOLOdrive 560/A

118.8 mm / 4.68”

• Weight: 372 g, 13.12 oz • Packaging: 6, 10 or 45 pcs/carton

30 mm / 1.18” ø 5 mm / 0.19” (M4/M5)

SOLOdrive 560/A

66.4 mm 2.61”

76 mm 2.99”

152.5 mm / 6.00”

30.1 mm / 1.19”

Connections Connectors

Wiring

• LED outputs: + and - (x2)

• Cross section: 0.5 - 1.5 mm2, AWG 20 - 16

• LEDcode / NTC: + and -

• Strip length: 9 mm / 0.35 in.

• DALI: + and - (x2) • Power: Line, Neutral and Ground

LEDcode configuration • USB-LEDcode interface: TOOLbox pro (part number: TLU20502)

• FluxTool software: for Mac and PC freely downloadable from www.eldoled.com/fluxtool

Other information Certifications

Environmental ratings

• CE

• Ta range: -20°C...+50°C / -4°F...+122°F

• IEC 61347, IEC 62384, EN 55015, EN 55022,

• Tc max: 85°C / 185°F

IEC 61000-3-2, IEC 61547, IEC 62386-207

• For use in damp and dry locations

• UL: Recognized Component for US and Canada (file no. E333135), according to UL1310 and UL8750. US: Class 2 output. Canada: Non-Class 2 output. (SOLOdrive 560/M pending)

Control compatibility • DALI control gear

• ENEC by VDE (SOLOdrive 560/M pending)

Europe, Rest of World

North America

eldoLED Europe bv

eldoLED America, Inc.

Other documentation and support Visit www.eldoled.com/ACsupport for further documentation such as

Luchthavenweg 18a

1762 Technology Drive #226

quick start guide, wiring diagram, tech sheet and 3D IGES files.

NL-5657 EB Eindhoven

San Jose, CA 95110

The Netherlands

USA

T: +31 40 2054050

T: +1 408 451 9333

eldoLED represents and warrants that for a period of 3 (three) years, as

F: +31 40 2054058

F: +1 408 451 9335

of the date of invoice, Products materially meet the specifications and

Warranty

specifically agreed upon quality, both as stated in the applicable datasheet and/or written design-in specifications, or as stated in writing otherwise by eldoLED, provided that these specifications are explicitly Sales support EU & Rest of World: sales@eldoled.com

designated by eldoLED as "warranted specifications".

Sales support US/Canada: nasales@eldoled.com

For the complete warranty text, visit www.eldoled.com/terms.

© 2012 eldoLED. All rights reserved. V3.2

More product documentation and eldoLED’s terms and conditions are available at www.eldoled.com.


Datasheet SOLOdrive 106*/A, 106*/S, 106*/M

AC Series

100W Dimmable LED Driver SOLOdrive AC is a constant current LED driver with multiple LED outputs that are controlled over a single channel. It is targeted at larger networked and smaller standalone installations that require dimmable, high-power, general white LED lighting. SOLOdrive AC is available in a DALI and 0-10V compatible version.

Applications • Office lighting

• High and Low Bay lighting

• Public area / park / street lighting

• Architectural lighting

• Signage / advertising lighting

• Display lighting

• Hospitality lighting

• Retail lighting

Features & benefits Input • Voltage: 120 - 277 VAC • Current, max: 1A at 120V/60Hz 0.5A at 230V/50Hz 0.45A at 277V/60Hz • Frequency: 50/60Hz

Output • Voltage: 60V max, 57V typ • Current range: configurable from 200mA to 1,050mA • Power: 100W max

General • Power factor: > 0.94 • DALI or 0-10V compatible • Hybrid HydraDrive: 20-bit resolution • Dimming control: smooth dimming from 100% to 0%, choice of linear or logarithmic dimming curve • High efficiency over a wide power and voltage range: 90% at full load, ≥ 87% above 50W output • Maximum (rated) power available over wide LED voltage (30-60V) and LED current range (200-1,050mA) • Programmable NTC temperature, dimming curve, minimum dimming level and - per output - LED current

Product offering Description

Product

SOLOdrive AC, 100W, DALI, 1 ballast, constant current, 4x 60V LED outputs, long metal/plastic

SOLO 1060/A

Order no. SL1060A1

SOLOdrive AC, 100W, DALI, 1 ballast, constant current, 4x 60V LED outputs, square metal

SOLO 1060/S

SL1060S1

SOLOdrive AC, 100W, DALI, 1 ballast, constant current, 4x 60V LED outputs, long metal

SOLO 1060/M

SL1060M1

SOLOdrive AC, 100W, 0-10V, 1 control channel, constant current, 4x 60V LED outputs, long metal/plastic

SOLO 1061/A

SL1061A1

SOLOdrive AC, 100W, 0-10V, 1 control channel, constant current, 4x 60V LED outputs, square metal

SOLO 1061/S

SL1061S1

SOLOdrive AC, 100W, 0-10V, 1 control channel, constant current, 4x 60V LED outputs, long metal

SOLO 1061/M

SL1061M1

© 2013 eldoLED. All rights reserved. V5.1

More product documentation and eldoLED’s terms and conditions are available at www.eldoled.com.


Datasheet SOLOdrive 106*/A, 106*/S, 106*/M

AC Series

Dimensions, weight, packaging SOLOdrive 106*/A

30 mm / 1.18”

354 mm / 13.94”

• Weight: 705 g, 26 oz

ø 5.0 mm / 0.2”

• Packaging: 20 pcs/carton 42 mm 1.65” 388 mm / 15.27”

SOLOdrive 106*/S

219.5 mm / 8.64”

• Weight: 880 g, 31 oz

30 mm / 1.18”

ø 5.0 mm / 0.2”

• Packaging: 20 pcs/carton

15 mm / 0.59”

80 mm 3.15”

50 mm / 1.97”

15 mm / 0.59” 230 mm / 9.06”

SOLOdrive 106*/M

361 mm / 14.21”

• Weight: 880 g, 31 oz

30 mm / 1.18”

ø 5.0 mm / 0.2”

• Packaging: 20 pcs/carton 41 mm 1.61” 370 mm / 14.57”

Connections Connectors

Wiring

• Power: Line, Neutral and Ground

• Cross section: 0.5 - 1.5 mm2, AWG 20 - 16

• DALI or 0-10V: + and - (x2)

• Strip length: 9 mm / 0.35 in.

• LED outputs: 1 ballast: + and - (x4) • LEDcode / NTC: + and -

Other information Certifications

Environmental ratings

• IEC 61347-1, IEC 61347-2-13, IEC 62384 + A1, EN 55015 + A1,

• Ta range: -40°C...+50°C / -40°F...+122°F

EN 55022 + A1, IEC 61000-3-2, IEC 61547 + A1, IEC 62386-207 • CE

• Tc max: 90°C / 194°F (106*/A), 85°C / 185°F (106*/M), 83°C / 181°F (106*/S)

• ENEC by VDE

• For use in damp and dry locations

• UL: Recognized Component for US and Canada (file no. E333135), according to UL1310 and UL8750.

Control compatibility • DALI control gear

US: Class 2 output. Canada: Non-Class 2 output.

• Standard 0-10V wall mount dimmers and switch controls

Europe, Rest of World

North America

Other documentation and support

eldoLED Europe bv

eldoLED America, Inc.

Visit www.eldoled.com/ACsupport for further documentation such as

Luchthavenweg 18a

1762 Technology Drive #226

quick start guide, wiring diagram, tech sheet and 3D IGES files.

NL-5657 EB Eindhoven

San Jose, CA 95110

Warranty

The Netherlands

USA

T: +31 40 2054050

T: +1 408 451 9333

eldoLED represents and warrants that for a period of 3 (three) years, as

F: +31 40 2054058

F: +1 408 451 9335

of the date of invoice, Products materially meet the specifications and specifically agreed upon quality, both as stated in the applicable datasheet and/or written design-in specifications, or as stated in writing otherwise by eldoLED, provided that these specifications are explicitly

Sales support EU & Rest of World: sales@eldoled.com

designated by eldoLED as "warranted specifications".

Sales support US/Canada: nasales@eldoled.com

For the complete warranty text, visit www.eldoled.com/terms.

© 2013 eldoLED. All rights reserved. V5.1

More product documentation and eldoLED’s terms and conditions are available at www.eldoled.com.


Datasheet DUALdrive 560/M, 560/S, 560/A

AC Series

50W Dimmable DALI LED Driver DUALdrive 560 is about two separately controllable LED outputs - whether used in dual-head fixtures or dynamic white applications, DUALdrive offers DALI compatible, beautiful dimming all the way down to 0% brightness. DUALdrive, like all eldoLED AC series products, is programmable, has a wide application area and is ready for LEDcode-based feature extensions.

Applications • Office lighting

• Signage and advertising lighting

• Combined task / ambient lighting

• Architectural lighting

• Tunable white lighting

• Retail display lighting

Features & benefits Input • Voltage: 120 - 277 VAC • Current, max: 0.7A • Frequency: 50/60Hz

Output • Class 2 LED outputs (x2) • Voltage: 55V typ • Current range: settable from 200mA to 1,050mA for each LED output separately • Power: 50W max

General • Power factor: > 0.9 • DALI compatible (IEC 62386-101/102/207) • Hybrid HydraDrive: efficient, smooth and flicker-free dimming • Full dimming control: 100% to 0%, choice of linear or logarithmic dimming curve • Highly efficient over a wide power and voltage range: 89% at full load, ≥ 85% above 67% load • Maximum (rated) power available over wide LED voltage (30-55V) and LED current range (200-1,050mA) • NTC interface for robust thermal management • LEDcode: programming interface (LED output current, NTC temperature, dimming curve, minimum dimming level) and sensor/extended feature set interface

Product offering Description

Product

Order no.

DUALdrive AC, 50W, DALI, 2 ballasts, constant current, 2x 60V LED outputs, long metal

DUAL 560/M

DL0560M1

DUALdrive AC, 50W, DALI, 2 ballasts, constant current, 2x 60V LED outputs, square metal

DUAL 560/S

DL0560S1

DUALdrive AC, 50W, DALI, 2 ballasts, constant current, 2x 60V LED outputs, square metal/plastic

DUAL 560/A

DL0560A1

© 2012 eldoLED. All rights reserved. V3.3

More product documentation and eldoLED’s terms and conditions are available at www.eldoled.com.


Datasheet DUALdrive 560/M, 560/S, 560/A

AC Series

Dimensions, weight, packaging DUALdrive 560/M

21 mm / 0.83”

436 mm / 17.17” ø 5.0 mm / 0.2”

• Weight: 360 g, 12.7 oz • Packaging: 4, 10 or

29.9 mm 1.18”

DUALdrive 560/M

40 pcs/carton 444 mm / 17.48”

DUALdrive 560/S

ø 5 mm / 0.19” (M4/M5)

118.8 mm / 4.68”

• Weight: 350 g, 12.35 oz • Packaging: 6, 10 or 45 pcs/carton 66.4 mm 2.61”

76 mm 2.99”

130 mm / 5.12”

DUALdrive 560/A

118.8 mm / 4.68”

• Weight: 372 g, 13.12 oz • Packaging: 6, 10 or 45 pcs/carton

30 mm / 1.18” ø 5 mm / 0.19” (M4/M5)

DUALdrive 560/A

66.4 mm 2.61”

76 mm 2.99”

152.5 mm / 6.00”

Connections Connectors

Wiring

• LED outputs: + and - (x2)

• Cross section: 0.5 - 1.5 mm2, AWG 20 - 16

• LEDcode / NTC: + and -

• Strip length: 9 mm / 0.35 in.

30.1 mm / 1.19”

• DALI: + and - (x2) • Power: Line, Neutral and Ground

LEDcode configuration • USB-LEDcode interface: TOOLbox pro (part number: TLU20502)

• FluxTool software: for Mac and PC freely downloadable from www.eldoled.com/fluxtool

Other information Certifications

Environmental ratings

• CE

• Ta range: -20°C...+50°C / -4°F...+122°F

• IEC 61347, IEC 62384, EN 55015, EN 55022, IEC 61000-3-2,

• Tc max: 85°C / 185°F

IEC 61547, IEC 62386-101/102/207

• For use in damp and dry locations

• UL: Recognized Component for US and Canada (file no. E333135), according to UL1310 and UL8750. US: Class 2 output. Canada: Non-Class 2 output. (DUALdrive 560/M pending)

Control compatibility • DALI control gear

• ENEC by VDE: pending

Europe, Rest of World

North America

Other documentation and support

eldoLED Europe bv

eldoLED America, Inc.

Visit www.eldoled.com/ACsupport for further documentation such as

Luchthavenweg 18a

1762 Technology Drive #226

quick start guide, wiring diagram, tech sheet and 3D IGES files.

NL-5657 EB Eindhoven

San Jose, CA 95110

The Netherlands

USA

T: +31 40 2054050

T: +1 408 451 9333

eldoLED represents and warrants that for a period of 3 (three) years, as

F: +31 40 2054058

F: +1 408 451 9335

of the date of invoice, Products materially meet the specifications and

Warranty

specifically agreed upon quality, both as stated in the applicable datasheet and/or written design-in specifications, or as stated in writing otherwise by eldoLED, provided that these specifications are explicitly Sales support EU & Rest of World: sales@eldoled.com

designated by eldoLED as "warranted specifications".

Sales support US/Canada: nasales@eldoled.com

For the complete warranty text, visit www.eldoled.com/terms.

© 2012 eldoLED. All rights reserved. V3.3

More product documentation and eldoLED’s terms and conditions are available at www.eldoled.com.


Datasheet DUALdrive 1060/A, 1060/S, 1060/M

AC Series

100W Dimmable LED Driver DUALdrive AC is a constant current LED driver with multiple LED outputs that are controlled over two channels. It is targeted at larger networked and smaller standalone installations that require dimmable, high-power general white LED lighting. Thanks to its two control channels, this driver is ideal for tunable white applications or luminaires that combine ambient and task lighting. DUALdrive AC is DALI and switch-dim compatible.

Applications • Office lighting

• Signage and advertising lighting

• Combined task / ambient lighting

• Architectural lighting

• Tunable white lighting

• Retail display lighting

Features & benefits Input • Voltage: 120 - 277 VAC • Current, max: 1A at 120V/60Hz 0.5A at 230V/50Hz 0.45A at 277V/60Hz • Frequency: 50/60Hz

Output • Voltage: 60V max, 57V typ • Current range: configurable from 200mA to 1,050mA • Power: 100W max

General • Power factor: > 0.94 • DALI (2 ballasts) and switch-dim compatible • Hybrid HydraDrive: 20-bit resolution • Dimming control: smooth dimming from 100% to 0%, choice of linear or logarithmic dimming curve • High efficiency over a wide power and voltage range: 90% at full load, ≥ 87% above 50W output • Maximum (rated) power available over wide LED voltage (30-60V) and LED current range (200-1,050mA) • Programmable NTC temperature, dimming curve, minimum dimming level and - per output - LED current

Product offering Description

Product

Order no.

DUALdrive AC, 100W, DALI, 2 ballasts, constant current, 4x 60V LED outputs, long metal/plastic

DUAL 1060/A

DL1060A1

DUALdrive AC, 100W, DALI, 2 ballasts, constant current, 4x 60V LED outputs, square metal

DUAL 1060/S

DL1060S1

DUALdrive AC, 100W, DALI, 2 ballasts, constant current, 4x 60V LED outputs, long metal

DUAL 1060/M

DL1060M1

© 2012 eldoLED. All rights reserved. V5.0

More product documentation and eldoLED’s terms and conditions are available at www.eldoled.com.


Datasheet DUALdrive 1060/A, 1060/S, 1060/M

AC Series

Dimensions, weight, packaging 30 mm / 1.18”

354 mm / 13.94”

DUALdrive 1060/A

ø 5.0 mm / 0.2”

• Weight: 705 g, 26 oz • Packaging: 20 pcs/carton

42 mm 1.65” 388 mm / 15.27”

DUALdrive 1060/S

219.5 mm / 8.64”

• Weight: 880 g, 31 oz

30 mm / 1.18”

ø 5.0 mm / 0.2”

• Packaging: 20 pcs/carton

15 mm / 0.59”

80 mm 3.15”

50 mm / 1.97”

15 mm / 0.59” 230 mm / 9.06”

DUALdrive 1060/M

30 mm / 1.18”

361 mm / 14.21”

• Weight: 880 g, 31 oz

ø 5.0 mm / 0.2”

• Packaging: 20 pcs/carton 41 mm 1.61” 370 mm / 14.57”

Connections Connectors

Wiring

• Power: Line, Neutral and Ground

• Cross section: 0.5 - 1.5 mm2, AWG 20 - 16

• DALI: + and - (x2)

• Strip length: 9 mm / 0.35 in.

• LED outputs: ballast 1: + and - (x2) ballast 2: + and - (x2) • LEDcode/NTC: + and -

Other information Certifications

Environmental ratings

• IEC 61347-1, IEC 61347-2-13, IEC 62384 + A1, EN 55015 + A1,

• Ta range: -40°C...50°C / -40°F...122°F

EN 55022 + A1, IEC 61000-3-2, IEC 61547 + A1, IEC 62386-207 • CE

• Tc max: 90°C / 194°F (1060/A), 85°C / 185°F (1060/M), 83°C / 181°F (1060/S)

• ENEC by VDE

• For use in damp and dry locations

• UL: Recognized Component for US and Canada (file no. E333135), according to UL1310 and UL8750.

Control compatibility • DALI control gear

US: Class 2 output. Canada: Non-Class 2 output.

• Momentary light switches for switch-dim functionality

Europe, Rest of World

North America

Other documentation and support

eldoLED Europe bv

eldoLED America, Inc.

Visit www.eldoled.com/ACsupport for further documentation such as

Luchthavenweg 18a

1762 Technology Drive #226

quick start guide, wiring diagram, tech sheet and 3D IGES files.

NL-5657 EB Eindhoven

San Jose, CA 95110

Warranty

The Netherlands

USA

T: +31 40 2054050

T: +1 408 451 9333

eldoLED represents and warrants that for a period of 3 (three) years, as

F: +31 40 2054058

F: +1 408 451 9335

of the date of invoice, Products materially meet the specifications and specifically agreed upon quality, both as stated in the applicable datasheet and/or written design-in specifications, or as stated in writing otherwise by eldoLED, provided that these specifications are explicitly

Sales support EU & Rest of World: sales@eldoled.com

designated by eldoLED as "warranted specifications".

Sales support US/Canada: nasales@eldoled.com

For the complete warranty text, visit www.eldoled.com/terms.

© 2012 eldoLED. All rights reserved. V5.0

More product documentation and eldoLED’s terms and conditions are available at www.eldoled.com.


Datasheet POWERdrive 45D, 90D, 180D

DC Series

45/90/180 Watt Full-Colour Dimmable LED Driver POWERdrive DC is a constant current LED driver with multiple LED outputs that are controlled over four channels. It is targeted at larger networked and smaller standalone installations that require dimmable, high-power full-colour static or dynamic LED lighting. POWERdrive DC is DALI, DMX/ RDM and LedSync compatible.

Applications • Entertainment lighting

• Signage / advertising lighting

• Full-colour / tunable white applications

• Stage lighting

• Façade lighting

• Decorative lighting

• Full-colour architectural lighting

• Retail display lighting

Features & benefits Input • Voltage: 12 - 32 VDC • Current, max: POWERdrive 45D: 2.2A POWERdrive 90D: 4.62A POWERdrive 180D: 6.16A

Output • Voltage: 11 - 31 VDC (Vsup - 1V) • Current range: POWERdrive 45D configurable from 200 - 500mA POWERdrive 90D configurable from 200 - 1,050mA POWERdrive 180D configurable from 200 - 1,400mA • Power: 45W, 90W, 180W max

General • DALI, USITT DMX512A / RDM (explore & address, ANSI E1.20) and LedSync compatible • HydraDrive: 15-bit resolution • Dimming control: smooth dimming from 100% to 0.1%, gamma-corrected curve • High efficiency • LED current configurable for each output separately • Intuitive 3-button user interface for on-the-fly configuration • Interface for external control device: 10kΩ potentiometer, 0-10V source or momentary switch • ShowMaster: 9 default shows, up to 20 user-defined shows, uploadable via TOOLbox and PC software • NTC interface for robust thermal management

Product offering Description

Product

Order no.

POWERdrive DC, 45W, DMX/DALI/0-10V, 4 control channels, constant current, 4x LED outputs

POWER 45D

PWR045D2

POWERdrive DC, 90W, DMX/DALI/0-10V, 4 control channels, constant current, 4x LED outputs

POWER 90D

PWR090D2

POWERdrive DC, 180W, DMX/DALI/0-10V, 4 control channels, constant current, 4x LED outputs

POWER 180D

PWR180D2

© 2012 eldoLED. All rights reserved. V4.2

More product documentation and eldoLED’s terms and conditions are available at www.eldoled.com.


Datasheet POWERdrive 45D, 90D, 180D

DC Series

Dimensions, weight, packaging • Weight: 191 g, 6.7 oz

150 mm / 5.90”

• Packaging: 12 pcs/carton

23 mm / 0.91”

21.5 mm / 0.85”

ø 4.2 mm / 0.17” 10 mm / 0.39”

Max | Vdc+

Group 1+

32V | Vdc-

Group Group 2 +

Ext in Ext in +

Group 2 DA + DA DA + DA DMX in + DMX in DMX in shield LedSync out + LedSync out LedSync shield

30 mm / 1.18”

10 mm / 0.39”

POWERdrive 180D

TC

12-32V / 180W Constant current LED driver

Group 3 + Group 3 -

50 mm / 1.97”

Group 4 + Group 4 -

M

NTC NTC

193 mm / 7.60”

Connections Connectors

Connectors (cont’d)

• VDC: + and -

• LED outputs: + and - (x4)

• DALI: + and - (x2)

• NTC: + and -

• DMX in: +, - and shield

Wiring

• LedSync out: +, - and shield

• Cross section: 0.5 - 1.5 mm2, AWG 20 - 16

• Ext in: + and -

• Strip length: 9 mm / 0.35 in.

Other information Certifications

Environmental ratings

• CE

• Ta range: -20°C...50°C / -4°F...122°F

• IEC 61347, EN 55015, IEC 61003, EN 61547

• Tc max: 65°C / 149°F

• UL: UL Recognized Component (file no. E333135).

• For use in dry locations

POWERdrive 40D and 90D are Class 2 output.

Control compatibility

Accessories

• DALI control gear • DMX512A and RDM explore & address (ANSI E1.20) control gear

• LEC4 LED engine with CREE® MC-E Color • LEW4 LED engine with

CREE®

• Standard 0-10V switch controls

MC-E White

Europe, Rest of World

North America

Other documentation and support

eldoLED Europe bv

eldoLED America, Inc.

Visit www.eldoled.com/support for further documentation such as quick

Luchthavenweg 18a

1762 Technology Drive #226

start guide, wiring diagram, tech sheet and 3D IGES files.

NL-5657 EB Eindhoven

San Jose, CA 95110

The Netherlands

USA

T: +31 40 2054050

T: +1 408 451 9333

eldoLED represents and warrants that for a period of 3 (three) years, as

F: +31 40 2054058

F: +1 408 451 9335

of the date of invoice, Products materially meet the specifications and

Warranty

specifically agreed upon quality, both as stated in the applicable datasheet and/or written design-in specifications, or as stated in writing otherwise by eldoLED, provided that these specifications are explicitly Sales support EU & Rest of World: sales@eldoled.com

designated by eldoLED as "warranted specifications".

Sales support US/Canada: nasales@eldoled.com

For the complete warranty text, visit www.eldoled.com/terms.

© 2012 eldoLED. All rights reserved. V4.2

More product documentation and eldoLED’s terms and conditions are available at www.eldoled.com.


Datasheet POWERdrive 562/S, 562/A, 561/M

AC Series

50W Full-Colour Dimmable LED Driver POWERdrive 562 and 561 are constant current, DMX/RDM compatible LED drivers with three and four LED outputs respectively. Targeted at a wide range of full-colour, dynamic LED lighting applications, POWERdrive’s dynamic response can be tuned to fit any content - from exceptionally smooth fades in architecture to fast-paced video in entertainment. POWERdrive - Beyond Colour.

Applications • Entertainment lighting

• Signage / advertising lighting

• Full-colour / tunable white applications

• Stage lighting

• Façade lighting

• Decorative lighting

• Full-colour architectural lighting

• Retail display lighting

Features & benefits Input • Voltage: 120 - 277 VAC • Current, max: 0.7A • Frequency: 50/60Hz

Output • Voltage: 55V typ • Current range: settable from 200mA to 1,050mA for each LED output separately • Power: 50W max

General • Power factor: > 0.9 • DMX / RDM and LedSync compatible • Hybrid HydraDrive: efficient, smooth and flicker-free dimming • Full dimming control: 100% to 0%, choice of linear or logarithmic dimming curve • High efficiency over a wide power and voltage range: 89% at full load, ≥ 85% above 67% load • Maximum (rated) power available over wide LED voltage (30-55V) and LED current range (200-1,050mA) • LEDcode/NTC interface for robust thermal management • Programmable with TOOLbox pro and FluxTool software via DMX/LedSync

Product offering Description

Product

Order no.

POWERdrive AC, 50W, DMX, 3 control channels, constant current, 3x 60V LED outputs, square metal

POWER 562/S

PW0562S1

POWERdrive AC, 50W, DMX, 3 control channels, constant current, 3x 60V LED outputs, square metal/plastic

POWER 562/A

PW0562A1

POWERdrive AC, 50W, DMX, 4 control channels, constant current, 4x 60V LED outputs, long metal

POWER 561/M

PW0561M1

© 2012 eldoLED. All rights reserved. V3.3

More product documentation and eldoLED’s terms and conditions are available at www.eldoled.com.


Datasheet POWERdrive 562/S, 562/A, 561/M

AC Series

Dimensions, weight, packaging POWERdrive 561/M

21 mm / 0.83”

436 mm / 17.17” ø 5.0 mm / 0.2”

• Weight: 360 g, 12.7 oz • Packaging: 4, 10 or

29.9 mm 1.18”

POWERdrive 561/M

40 pcs/carton 444 mm / 17.48”

POWERdrive 562/S

ø 5 mm / 0.19” (M4/M5)

118.8 mm / 4.68”

• Weight: 350 g, 12.35 oz • Packaging: 6, 10 or 45 pcs/carton 66.4 mm 2.61”

76 mm 2.99”

130 mm / 5.12”

POWERdrive 562/A

118.8 mm / 4.68”

• Weight: 372 g, 13.12 oz • Packaging: 6, 10 or 45 pcs/carton

30 mm / 1.18”

ø 5 mm / 0.19” (M4/M5)

POWERdrive 562/A

66.4 mm 2.61”

76 mm 2.99”

152.5 mm / 6.00”

30.1 mm / 1.19”

Connections Connectors

Wiring

• LED outputs: + and - (562: x3 and 561: x4)

• Cross section: 0.5 - 1.5 mm2, AWG 20 - 16

• LEDcode/NTC: + and -

• Strip length: 9 mm / 0.35 in.

• DMX in: +, - and shield • Power: Line, Neutral and Ground

DMX/LedSync configuration • FluxTool software: for Mac and PC, freely downloadable from

• USB-DMX interface: TOOLbox pro (part number: TLU20502)

www.eldoled.com/fluxtool

Other information Certifications

Environmental ratings

• CE

• Ta range: -20°C...+50°C / -4°F...+122°F

• IEC 61347, IEC 62384, EN 55015,

• Tc max: 85°C / 185°F

EN 55022, IEC 61000-3-2, IEC 61547

• For use in damp and dry locations

• UL: pending • ENEC by VDE (pending for 561/M)

Control compatibility

Europe, Rest of World

North America

Other documentation and support

eldoLED Europe bv

eldoLED America, Inc.

Visit www.eldoled.com/ACsupport for further documentation such as

Luchthavenweg 18a

1762 Technology Drive #226

quick start guide, wiring diagram, tech sheet and 3D IGES files.

NL-5657 EB Eindhoven

San Jose, CA 95110

The Netherlands

USA

T: +31 40 2054050

T: +1 408 451-9333

eldoLED represents and warrants that for a period of 3 (three) years, as

F: +31 40 2054058

F: +1 408 451-9335

of the date of invoice, Products materially meet the specifications and

• DMX512A and RDM explore & address (ANSI E1.20) control gear

Warranty

specifically agreed upon quality, both as stated in the applicable datasheet and/or written design-in specifications, or as stated in writing otherwise by eldoLED, provided that these specifications are explicitly Sales support EU & Rest of World: sales@eldoled.com

designated by eldoLED as "warranted specifications".

Sales support US/Canada: nasales@eldoled.com

For the complete warranty text, visit www.eldoled.com/terms.

© 2012 eldoLED. All rights reserved. V3.3

More product documentation and eldoLED’s terms and conditions are available at www.eldoled.com.


Datasheet POWERdrive 106/A, 106/S, 106/M

AC Series

100W Full-Colour Dimmable LED Driver POWERdrive AC is a constant current LED driver with multiple LED outputs that are controlled over four channels. It is targeted at larger networked and smaller standalone installations that require dimmable, high-power full-colour static or dynamic LED lighting. POWERdrive AC is DALI, DMX/ RDM and LedSync compatible.

Applications • Entertainment lighting

• Signage / advertising lighting

• Full-colour / tunable white applications

• Stage lighting

• Façade lighting

• Decorative lighting

• Full-colour architectural lighting

• Retail display lighting

Features & benefits Input • Voltage: 120 - 277 VAC • Current, max: 1A at 120V/60Hz 0.5A at 230V/50Hz 0.45A at 277V/60Hz • Frequency: 50/60Hz

Output • Voltage: 60V max, 57V typ • Current range: configurable from 200mA to 1,050mA • Power: 100W max

General • Power factor: > 0.94 • DALI, DMX/RDM and LedSync compatible • Hybrid HydraDrive: 20-bit resolution • Dimming control: smooth dimming from 100% to 0%, choice of linear or logarithmic dimming curve • High efficiency over a wide power and voltage range: 90% at full load, ≥ 87% above 50W output • Maximum (rated) power available over wide LED voltage (30-60V) and LED current range (200-1,050mA) • LED current configurable for each output separately • Intuitive 3-button user interface for on-the-fly configuration • Interface for external control device: 10kΩ potentiometer, 0-10V source or momentary switch • LEDcode/NTC interface for robust thermal management • ShowMaster: 9 default shows, up to 20 user-defined shows, uploadable via TOOLbox and PC software

Product offering Description

Product

Order no.

POWERdrive AC, 100W, DMX/DALI/0-10V, 4 control chann, const current, 4x 60V LED outputs, long metal/plastic POWER 106/A PWR106A1 POWERdrive AC, 100W, DMX/DALI/0-10V, 4 control chann, const current, 4x 60V LED outputs, square metal

POWER 106/S PWR106S1

POWERdrive AC, 100W, DMX/DALI/0-10V, 4 control chann, const current, 4x 60V LED outputs, long metal

POWER 106/M PWR106M1

© 2012 eldoLED. All rights reserved. V5.0

More product documentation and eldoLED’s terms and conditions are available at www.eldoled.com.


Datasheet POWERdrive 106/A, 106/S, 106/M

AC Series

Dimensions, weight, packaging POWERdrive 106/A

30 mm / 1.18”

354 mm / 13.94”

• Weight: 705 g, 26 oz

ø 5.0 mm / 0.2” DMX

• Packaging: 20 pcs/carton

LedSync

42 mm 1.65”

M

388 mm / 15.27”

POWERdrive 106/S

219.5 mm / 8.64”

• Weight: 880 g, 31 oz

30 mm / 1.18”

ø 5.0 mm / 0.2”

• Packaging: 20 pcs/carton

15 mm / 0.59”

M

50 mm / 1.97”

80 mm 3.15”

15 mm / 0.59” 230 mm / 9.06”

POWERdrive 106/M

361 mm / 14.21”

• Weight: 880 g, 31 oz

30 mm / 1.18”

ø 5.0 mm / 0.2”

• Packaging: 20 pcs/carton M

41 mm 1.61”

370 mm / 14.57”

Connections Connectors

Connectors (cont’d)

• Power: Line, Neutral and Ground

• LED outputs: + and - (x4)

• DALI: + and - (x2)

• LEDcode/NTC: + and -

• DMX in: +, - and shield

Wiring

• LedSync out: +, - and shield

• Cross section: 0.5 - 1.5 mm2, AWG 20 - 16

• Ext in: + and -

• Strip length: 9 mm / 0.35 in.

Other information Certifications

Environmental ratings

• IEC 61347-1, IEC 61347-2-13, IEC 62384 + A1, EN 55015 + A1,

• Ta range: -40°C...50°C / -40°F...122°F

EN 55022 + A1, IEC 61000-3-2, IEC 61547 + A1, IEC 62386-207 • CE

• Tc max: 90°C / 194°F (106/A), 85°C / 185°F (106/M), 83°C / 181°F (106/S)

• ENEC by VDE

• For use in damp and dry locations

• UL: Recognized Component for US and Canada (file no. E333135), according to UL1310 and UL8750.

Control compatibility • DALI control gear

US: Class 2 output. Canada: Non-Class 2 output.

• DMX512A and RDM explore & address (ANSI E1.20) control gear • Standard 0-10V switch controls

Europe, Rest of World

North America

eldoLED Europe bv

eldoLED America, Inc.

Other documentation and support Visit www.eldoled.com/ACsupport for further documentation such as

Luchthavenweg 18a

1762 Technology Drive #226

quick start guide, wiring diagram, tech sheet and 3D IGES files.

NL-5657 EB Eindhoven

San Jose, CA 95110

The Netherlands

USA

T: +31 40 2054050

T: +1 408 451 9333

eldoLED represents and warrants that for a period of 3 (three) years, as

F: +31 40 2054058

F: +1 408 451 9335

of the date of invoice, Products materially meet the specifications and

Warranty

specifically agreed upon quality, both as stated in the applicable datasheet and/or written design-in specifications, or as stated in writing otherwise by eldoLED, provided that these specifications are explicitly Sales support EU & Rest of World: sales@eldoled.com

designated by eldoLED as "warranted specifications".

Sales support US/Canada: nasales@eldoled.com

For the complete warranty text, visit www.eldoled.com/terms.

© 2012 eldoLED. All rights reserved. V5.0

More product documentation and eldoLED’s terms and conditions are available at www.eldoled.com.


Datasheet POWERdrive 6060/R

AC Series

600W 32-Channel Dimmable LED Driver POWERdrive 6060/R is a 19” rackmount, remote mounted constant current LED driver. Targeted at both dynamic full-colour and white lighting applications, POWERdrive 6060/R supports various control protocols: it can be set up as one to four DALI ballasts for general white lighting or as a 4-channel DMX driver, offering 8x RGBW outputs. POWERdrive’s dynamic response can be tuned to fit any use case - from exceptionally smooth fades in architecture to fast-paced video in entertainment. POWERdrive - Beyond Colour.

Applications • Entertainment lighting

• Façade lighting

• Full-colour / tunable white applications

• Full-colour architectural lighting

• Retail display lighting

• General white lighting

Features & benefits Input • Voltage per LED output: 120 - 240 VAC • Current, max: 9A at 120VAC, 5A at 230V • Frequency: 50/60Hz

Output • Voltage: 5 - 48V • Current range: every LED output is programmable from 200mA to 1,050mA • Power: 600W max

General • Power factor: > 0.95 • USITT DMX512A / RDM (explore & address, ANSI E1.20) and LedSync compatible • DALI compatible (IEC 62386-101/102/207) • Hybrid HydraDrive: efficient, smooth and flicker-free dimming • Full dimming control: 100% to 0%, choice of dimming curve type • High efficiency over a wide power and voltage range: 84% at full load • Maximum (rated) power available over wide LED voltage and LED current range (200-1,050mA) • NTC interface for robust thermal management per LED output group • ShowMaster: 9 default shows, up to 20 user-defined shows, uploadable with TOOLbox and TOOLbox software

Product offering Description

Product

POWERdrive AC, 600W, DMX, DALI, 8x 4 control channels, constant current, 32x 55V LED outputs, metal

POWER 6060/R PW6060R1

© 2012 eldoLED. All rights reserved. V1.1

Order no.

More product documentation and eldoLED’s terms and conditions are available at www.eldoled.com.


Datasheet POWERdrive 6060/R

AC Series

Dimensions, weight, packaging POWERdrive 6060/R

428 mm / 16.85”

• Weight: 6.1 kg,

ø 5.0 mm / 0.2”

13 lb, 7.2 oz • Packaging: 1 pc

30.0 mm 1.18”

44.5 mm 1.75” 482.6 mm / 19.00” Depth: 329mm / 12.95”

Connections Connectors

Connectors cont’d

• LED outputs: 32 outputs (+ and -): e.g. 8x RGBW

• 0-10V:

• NTC: + and - per 4 LED groups (8x)

• Power: Line, Neutral and Ground

• DMX in: +, - and shield (RJ45)

LED wiring

• LedSync out: +, - and shield (RJ45)

• Cross section: 0.5 - 1.5 mm2, AWG 20 - 16

• LedSync thru: +, - and shield (RJ45)

• Strip length: 9 mm / 0.35 in.

• DALI: + and -

• Max length: 100m / 328ft

LEDcode configuration • FluxTool software: for Mac and PC, freely downloadable from

• USB-LEDcode interface: TOOLbox pro (part number: TLU20502)

www.eldoled.com/fluxtool

Other information Certifications

Environmental ratings

• CE

• Ta range: -20°C...40°C / -4°F...104°F

• IEC 61347, IEC 62384, EN 55015,

• Tc max: 85°C / 185°F

EN 55022, IEC 61000-3-2, IEC 61547

• For use in damp and dry locations

IEC 62386-101/102/207

Control compatibility • DMX512A and RDM explore & address (ANSI E1.20) control gear • DALI control gear

Europe, Rest of World

North America

Other documentation and support

eldoLED Europe bv

eldoLED America, Inc.

Visit www.eldoled.com/ACsupport for further documentation such as

Luchthavenweg 18a

1762 Technology Drive #226

quick start guide, wiring diagram, tech sheet and 3D IGES files.

NL-5657 EB Eindhoven

San Jose, CA 95110

The Netherlands

USA

T: +31 40 2054050

T: +1 408 451-9333

eldoLED represents and warrants that for a period of 3 (three) years, as

F: +31 40 2054058

F: +1 408 451-9335

of the date of invoice, Products materially meet the specifications and

Warranty

specifically agreed upon quality, both as stated in the applicable datasheet and/or written design-in specifications, or as stated in writing otherwise by eldoLED, provided that these specifications are explicitly Sales support EU & Rest of World: sales@eldoled.com

designated by eldoLED as "warranted specifications".

Sales support US/Canada: nasales@eldoled.com

For the complete warranty text, visit www.eldoled.com/terms.

© 2012 eldoLED. All rights reserved. V1.1

More product documentation and eldoLED’s terms and conditions are available at www.eldoled.com.


Datasheet ECOdrive 15D, 30D, 45D

DC Series

15/30/45 Watt Full-Colour Dimmable LED Driver ECOdrive DC is a constant current LED driver that runs multiple LED outputs over a single, high-precision current source, resulting in a high efficiency. It is targeted at larger networked and smaller standalone installations that require dimmable, high-power, full-colour static or dynamic LED lighting. ECOdrive DC is DMX and LedSync compatible.

Applications • Entertainment lighting

• Signage / advertising lighting

• Full-colour / tunable white applications

• Stage lighting

• Façade lighting

• Decorative lighting

• Full-colour architectural lighting

• Retail display lighting

Features & benefits Input • Voltage: 12 - 32 VDC • Current, max: ECOdrive 15D: 0.55A ECOdrive 30D: 1.16A ECOdrive 45D: 1.54A

Output • Voltage: 11 - 31 VDC (Vf LEDs < Vsup - 1V) • Current range: ECOdrive 15D configurable from 200 - 500mA ECOdrive 30D configurable from 200 - 1,050mA ECOdrive 45D configurable from 200 - 1,400mA • Power: 15W, 30W, 45W max

General • USITT DMX512A and LedSync compatible • HydraDrive: 15-bit resolution • Dimming control: smooth dimming from 100% to 0.1%, gamma-corrected curve • High efficiency of up to 95% due to ‘multiple group - single current source’ technology • Intuitive 3-button user interface for on-the-fly configuration • Interface for external control device: 10kΩ potentiometer, 0-10V source or momentary switch • ShowMaster: 9 default shows, up to 20 user-defined shows, uploadable via TOOLbox and PC software • NTC interface for robust thermal management (ECOdrive 30D and 45D)

Product offering Description

Product

Order no.

ECOdrive DC, 15W, DMX/0-10V, 4 control channels, constant current, 4x LED outputs

ECO 15D

ECO015D1

ECOdrive DC, 30W, DMX/0-10V, 4 control channels, constant current, 4x LED outputs

ECO 15D

ECO030D1

ECOdrive DC, 45W, DMX/0-10V, 4 control channels, constant current, 4x LED outputs

ECO 15D

ECO045D1

© 2012 eldoLED. All rights reserved. V4.2

More product documentation and eldoLED’s terms and conditions are available at www.eldoled.com.


Datasheet ECOdrive 15D, 30D, 45D

DC Series

Dimensions, weight, packaging • Weight 15D: 128.5 g, 4.5 oz

110 mm / 4.33”

Weight 30D: 128.5 g, 4.5 oz

23 mm / 0.91”

21.5 mm / 0.85”

ø 4.2 mm / 0.17”

Weight 45D: 140 g, 4.9 oz

10 mm / 0.39” TC

• Packaging: 12 pcs/carton 30 mm / 1.18”

DMX in +

Ext in Ext in +

Group 1 Group 2

LedSync thru + LedSync thru -

10 mm / 0.39”

LedSync shield

50 mm / 1.97”

Group 3

DMX in DMX in shield

ECOdrive 45D

Group 4

12-32V / 45W Constant current LED driver

M

NTC + NTC -

153 mm / 6.02”

Connections Connectors

Wiring

• VDC: + and -

• Cross section: 0.5 - 1.5 mm2, AWG 20 - 16

• DMX in: +, - and shield

• Strip length: 9 mm / 0.35 in.

• LedSync thru: +, - and shield • Ext in: + and • LED outputs: 4 outputs with common + • NTC: + and - (only on ECOdrive 30D and 45D)

Other information Certifications

Environmental ratings

• CE

• Ta range: -20°C...50°C / -4°F...122°F

• IEC 61347, EN 55015, IEC 61003, EN 61547

• Tc max: 65°C / 149°F

• UL: UL Recognized Component, Class 2 output (file no. E333135).

• For use in dry locations

Accessories

Control compatibility

• Starboard LED engine:

• USITT DMX512A control gear

CREE® MC-E Color (RGBW with warm or neutral white)

• Standard 0-10V switch controls

CREE® MC-E White (4x neutral white or 4x warm white)

Europe, Rest of World

North America

Other documentation and support

eldoLED Europe bv

eldoLED America, Inc.

Visit www.eldoled.com/support for further documentation such as quick

Luchthavenweg 18a

1762 Technology Drive #226

start guide, wiring diagram, tech sheet and 3D IGES files.

NL-5657 EB Eindhoven

San Jose, CA 95110

The Netherlands

USA

T: +31 40 2054050

T: +1 408 451 9333

eldoLED represents and warrants that for a period of 3 (three) years, as

F: +31 40 2054058

F: +1 408 451 9335

of the date of invoice, Products materially meet the specifications and

Warranty

specifically agreed upon quality, both as stated in the applicable datasheet and/or written design-in specifications, or as stated in writing otherwise by eldoLED, provided that these specifications are explicitly Sales support EU & Rest of World: sales@eldoled.com

designated by eldoLED as "warranted specifications".

Sales support US/Canada: nasales@eldoled.com

For the complete warranty text, visit www.eldoled.com/terms.

© 2012 eldoLED. All rights reserved. V4.2

More product documentation and eldoLED’s terms and conditions are available at www.eldoled.com.


Datasheet LINEARdrive 100D, 180D, 720D

DC Series

4/6/24A Full-Colour Dimmable LED Driver LINEARdrive DC is a constant voltage LED driver with multiple LED outputs that are controlled over four channels. It is targeted at larger networked and smaller standalone installations that require dimmable, low-power full-colour static or dynamic LED lighting. LINEARdrive DC is DALI, DMX/ RDM and LedSync compatible.

Applications • Entertainment lighting

• Signage / advertising lighting

• Decorative lighting

• Full-colour architectural lighting

• Cove lighting

• Dynamic colour panel lighting

Features & benefits Input • Voltage: 12 - 28 VDC for LINEARdrive 100D/180D/720D1 12 - 48 VDC for LINEARdrive 720D2 • Current, max: LINEARdrive 100D: 4A at 24V, 6A at 12V LINEARdrive 180D: 6A, irrespective of PSU voltage LINEARdrive 720D: 24A, irrespective of PSU voltage

Output • Voltage: 5V, 12V, 24V or 48V (5V and 48V: LINEARdrive 720D2 only) • Max load per output: RGBW @ 12V

RGB @ 12V

RGBW @ 24V

RGB @ 24V

RGBW @ 48V

RGB @ 48V

LINEARdrive 100D

1.5A

2A

1A

1.3A

n.a.

n.a.

LINEARdrive 180D

1.5A

2A

1.5A

2A

n.a.

n.a.

LINEARdrive 720D1

6A

6A

6A

6A

n.a.

n.a.

LINEARdrive 720D2

6A

6A

6A

6A

6A

6A

General • DALI (LINEARdrive 720D only), USITT DMX512A / RDM (ANSI E1.20) and LedSync compatible • HydraDrive: 15-bit resolution • Dimming control: smooth dimming from 100% to 0.1%, gamma-corrected curve • Intuitive 3-button user interface for on-the-fly configuration • Interface for external control device: 10kΩ potentiometer, 0-10V source or momentary switch • ShowMaster: 9 default shows, up to 20 user-defined shows, uploadable via TOOLbox and PC software

Product offering Description

Product

Order no.

LINEARdrive DC, 100W, DMX/0-10V, 4 control channels, constant voltage, 4x LED outputs

LINEAR 100D

LIN100D2

LINEARdrive DC, 180W, DMX/0-10V, 4 control channels, constant voltage, 4x LED outputs

LINEAR 180D

LIN180D2

LINEARdrive DC, 720W, 48V, DMX/DALI/0-10V, 4 control channels, constant voltage, 4x LED outputs

LINEAR 720D

LIN720D2

© 2012 eldoLED. All rights reserved. V4.5

More product documentation and eldoLED’s terms and conditions are available at www.eldoled.com.


Datasheet LINEARdrive 100D, 180D, 720D

DC Series

Dimensions, weight, packaging LINEARdrive 100D/180D • Weight: 120 g, 4.2 oz

110 mm / 4.33”

• Packaging: 12 pcs/carton

23 mm / 0.91”

21.5 mm / 0.85”

ø 4.2 mm / 0.17” 10 mm / 0.39”

TC

DMX in + DMX in -

Ext in Ext in +

LED supply +

30 mm / 1.18”

DMX in shield LedSync thru + LedSync thru -

10 mm / 0.39”

LedSync shield

Group 1

50 mm / 1.97”

Group 2

LINEARdrive 180D

Group 3

12-28V / 6A Direct voltage controlled LED driver

Group 4

M 153 mm / 6.02” 110 mm / 4.33”

LINEARdrive 720D

23 mm / 0.91”

21.5 mm / 0.85”

ø 4.2 mm / 0.17”

• Weight: 144 g, 5.0 oz

10 mm / 0.39”

TC

• Packaging: 12 pcs/carton

Group 1 Group 1 GND Ext in Ext in +

DA + DA DA + DA DMX in + DMX in DMX in shield LedSync out + LedSync out LedSync shield

30 mm / 1.18”

10 mm / 0.39”

Group 2 Group 2 GND

LINEARdrive 720D

12-28V / 24A Direct voltage controlled LED driver

Group 3

50 mm / 1.97”

Group 3 GND Group 4

M

Group 4 GND

153 mm / 6.02”

Connections Connectors LINEARdrive 100D/180D

Connectors LINEARdrive 720D

• VDC: + and -

• VDC: + and -

• DMX in: +, - and shield

• DMX in: +, - and shield

• LedSync thru: +, - and shield

• LedSync out: +, - and shield

• Ext in: + and -

• DALI: + and - (x2)

• LED outputs: 4 outputs with common +

• Ext in: + and • LED outputs: + and - (x4)

Wiring • Cross section: 0.5 - 1.5 mm2, AWG 20 - 16 • Strip length: 9 mm / 0.35 in.

Other information Certifications

Environmental ratings

• CE

• Ta range: -20°C...50°C / -4°F...122°F

• IEC 61347, EN 55015, IEC 61003, EN 61547

• Tc max: 65°C / 149°F

• UL: UL Recognized Component (file no. E333135)

• For use in dry locations

LINEARdrive 100D is Class 2 output.

Control compatibility • DALI control gear (LINEARdrive 720D) • DMX512A and RDM explore & address (ANSI E1.20) control gear • Standard 0-10V switch controls

Europe, Rest of World

North America

eldoLED Europe bv

eldoLED America, Inc.

Other documentation and support Visit www.eldoled.com/support for further documentation such as quick

Luchthavenweg 18a

1762 Technology Drive #226

start guide, wiring diagram, tech sheet and 3D IGES files.

NL-5657 EB Eindhoven

San Jose, CA 95110

The Netherlands

USA

T: +31 40 2054050

T: +1 408 451 9333

eldoLED represents and warrants that for a period of 3 (three) years, as

F: +31 40 2054058

F: +1 408 451 9335

of the date of invoice, Products materially meet the specifications and

Warranty

specifically agreed upon quality, both as stated in the applicable datasheet and/or written design-in specifications, or as stated in writing otherwise by eldoLED, provided that these specifications are explicitly Sales support EU & Rest of World: sales@eldoled.com

designated by eldoLED as "warranted specifications".

Sales support US/Canada: nasales@eldoled.com

For the complete warranty text, visit www.eldoled.com/terms.

© 2012 eldoLED. All rights reserved. V4.5

More product documentation and eldoLED’s terms and conditions are available at www.eldoled.com.


Datasheet LINEARdrive 100/A, 100/S, 100/M

AC Series

8A Full-Colour Dimmable LED Driver LINEARdrive AC is a constant voltage LED driver with multiple LED outputs that are controlled over four channels. It is targeted at larger networked and smaller standalone installations that require dimmable, low-power full-colour static or dynamic LED lighting. LINEARdrive AC is DALI, DMX/RDM, LedSync, and 0-10V compatible.

Applications • Entertainment lighting • Full-colour architectural lighting

• Signage / advertising lighting • Cove lighting

• Decorative lighting • Dynamic colour panel lighting

Features & benefits Input

• Voltage: 120 - 277 VAC • Current, max: 1A at 120V/60Hz 0.5A at 230V/50Hz 0.45A at 277V/60Hz • Frequency: 50/60Hz

LINEARdrive AC - long metal/plastic - LINEAR 100/A

Output

• Load per output: RGBW @ 12V: 2.08A per output RGBW @ 24V: 1A per output RGB @ 12V: 2.76A per output RGB @ 24V: 1.33A per output • Power: 100W max • Current: 2.8A max per output General

• • • • • • •

LINEARdrive AC - square metal - LINEAR 100/S

LINEARdrive AC - long metal - LINEAR 100/M

Power factor: > 0.94 DALI, DMX/RDM, LedSync and 0-10V compatible Hybrid HydraDrive: 15-bit resolution Dimming control: smooth dimming from 100% to 0.1%, gamma-corrected curve Intuitive 3-button user interface for on-the-fly configuration DIP switch for 12V or 24V operation ShowMaster: 9 default shows, up to 20 user-defined shows, uploadable via TOOLbox and PC software

Product offering Description

Product

Order no.

LINEARdrive AC, 100W, DMX/DALI/0-10V, 4 control channels, const voltage, 4x 12/24V LED outputs, long metal/plastic

LINEAR 100/A

LIN100A1

LINEARdrive AC, 100W, DMX/DALI/0-10V, 4 control channels, const voltage, 4x 12/24V LED outputs, square metal

LINEAR 100/S

LIN100S1

LINEARdrive AC, 100W, DMX/DALI/0-10V, 4 control channels, const voltage, 4x 12/24V LED outputs, long metal

LINEAR 100/M

LIN100M1

© 2011 eldoLED. All rights reserved. V4.4

More product documentation and eldoLED’s terms and conditions are available at www.eldoled.com.


Datasheet LINEARdrive 100/A, 100/S, 100/M

AC Series

Dimensions, weight, packaging 30 mm / 1.18”

354 mm / 13.94”

LINEARdrive 100/A

ø 5.0 mm / 0.2”

Weight: 705g, 26 ounce 42 mm 1.65”

Packaging: 20pcs/carton M

388 mm / 15.27” 219.5 mm / 8.64”

LINEARdrive 100/S

30 mm / 1.18”

ø 5.0 mm / 0.2”

Weight: 880g, 31 ounce

15 mm / 0.59”

Packaging: 20pcs/carton M

50 mm / 1.97”

80 mm 3.15”

15 mm / 0.59” 230 mm / 9.06”

361 mm / 14.21”

LINEARdrive 100/M

30 mm / 1.18”

ø 5.0 mm / 0.2”

Weight: 880g, 31 ounce Packaging: 20pcs/carton

M

41 mm 1.61”

370 mm / 14.57”

Connections Connectors

Connectors (cont’d)

• Power: Line, Neutral and Ground

• LED outputs: 4 outputs with common +

• DALI: + and - (x2)

• LEDcode/NTC: + and -

• DMX in: +, - and shield

Wiring

• LedSync out: +, - and shield

• Cross section: 0.5 - 1.5 mm2, AWG 20 - 16

• Ext in: + and -

• Strip length: 9 mm / 0.35 in.

Other information Certifications

Environmental ratings

• IEC 61347-1, IEC 61347-2-13, IEC 62384 + A1, EN 55015 + A1,

• Ta range: -20°C...50°C / -4°F...122°F

EN 55022 + A1, IEC 61000-3-2, IEC 61547 + A1, IEC 62386-207 • CE

• Tc max: 90°C / 194°F (100/A) and 85°C / 185°F (100/M and 100/S) • For use in dry locations

• ENEC by VDE • UL: Recognized Component for US and Canada (file no. E333135), according to UL1310 and UL8750. Class 2 output for US and Canada.

Control compatibility • DALI control gear • DMX512A and RDM explore & address (ANSI E1.20) control gear • Standard passive 0-10V switch controls

Europe, Rest of World

North America

Other documentation and support

eldoLED Europe bv

eldoLED America, Inc.

Visit www.eldoled.com/ACsupport for further documentation such as

Luchthavenweg 18a

1762 Technology Drive #226

quick start guide, wiring diagram, tech sheet and 3D IGES files.

NL-5657 EB Eindhoven

San Jose, CA 95110

The Netherlands

USA

T: +31 40 2054050

T: +1 408 451-9333

F: +31 40 2054058

F: +1 408 451-9335

Warranty eldoLED represents and warrants that for a period of 3 (three) years, as of the date of invoice, Products materially meet the specifications and

E: info@eldoled.com

specifically agreed upon quality, both as stated in the applicable

Sales support US/Canada: nasales@eldoled.com

otherwise by eldoLED, provided that these specifications are explicitly

Sales support Rest of the World: sales@eldoled.com

© 2011 eldoLED. All rights reserved. V4.4

datasheet and/or written design-in specifications, or as stated in writing designated by eldoLED as "warranted specifications". For the complete warranty text, visit www.eldoled.com/terms. More product documentation and eldoLED’s terms and conditions are available at www.eldoled.com.


Datasheet LINEARdrive 100/A, 100/S, 100/M

AC Series

4x2A Full-Colour Dimmable LED Driver LINEARdrive AC is a constant voltage LED driver with multiple LED outputs that are controlled over four channels. It is targeted at larger networked and smaller standalone installations that require dimmable, low-power full-colour static or dynamic LED lighting. LINEARdrive AC is DALI, DMX/ RDM and LedSync compatible.

Applications • Entertainment lighting

• Signage / advertising lighting

• Decorative lighting

• Full-colour architectural lighting

• Cove lighting

• Dynamic colour panel lighting

Features & benefits Input • Voltage: 120 - 277 VAC • Current, max: 1A at 120V/60Hz 0.5A at 230V/50Hz 0.45A at 277V/60Hz • Frequency: 50/60Hz

Output • Voltage: 12VDC or 24VDC, selectable via DIP switch • Current: 2.8A absolute max rating per output • Power: 100W max • 4 LED outputs and 1 common anode For a description of various use cases at different output voltages and loads, refer to the driver’s tech sheet.

General • Power factor: > 0.94 • DALI, DMX/RDM and LedSync compatible • Hybrid HydraDrive: 15-bit resolution • Dimming control: smooth dimming from 100% to 0%, choice of linear or logarithmic dimming curve • Intuitive 3-button user interface for on-the-fly configuration • Interface for external control device: 10kΩ potentiometer, 0-10V source or momentary switch • DIP switch for 12V or 24V operation • ShowMaster: 9 default shows, up to 20 user-defined shows, uploadable via TOOLbox and PC software

Product offering Description

Product

Order no.

LINEARdrive AC, 100W, DMX/DALI/0-10V, 4 control channels, const voltage, 4x 12/24V LED outputs, long metal/plastic

LINEAR 100/A

LIN100A1

LINEARdrive AC, 100W, DMX/DALI/0-10V, 4 control channels, const voltage, 4x 12/24V LED outputs, square metal

LINEAR 100/S

LIN100S1

LINEARdrive AC, 100W, DMX/DALI/0-10V, 4 control channels, const voltage, 4x 12/24V LED outputs, long metal

LINEAR 100/M

LIN100M1

© 2012 eldoLED. All rights reserved. V5.0

More product documentation and eldoLED’s terms and conditions are available at www.eldoled.com.


Datasheet LINEARdrive 100/A, 100/S, 100/M

AC Series

Dimensions, weight, packaging LINEARdrive 100/A

30 mm / 1.18”

354 mm / 13.94”

• Weight: 705 g, 26 oz

ø 5.0 mm / 0.2”

• Packaging: 20 pcs/carton

42 mm 1.65”

M

388 mm / 15.27”

LINEARdrive 100/S

219.5 mm / 8.64”

• Weight: 880 g, 31oz

30 mm / 1.18”

ø 5.0 mm / 0.2”

• Packaging: 20 pcs/carton

15 mm / 0.59”

M

50 mm / 1.97”

80 mm 3.15”

15 mm / 0.59” 230 mm / 9.06”

LINEARdrive 100/M

361 mm / 14.21”

• Weight: 880 g, 31 oz

30 mm / 1.18”

ø 5.0 mm / 0.2”

• Packaging: 20 pcs/carton M

41 mm 1.61”

370 mm / 14.57”

Connections Connectors

Connectors (cont’d)

• Power: Line, Neutral and Ground

• LED outputs: 4 outputs with common +

• DALI: + and - (x2)

• LEDcode/NTC: + and -

• DMX in: +, - and shield

Wiring

• LedSync out: +, - and shield

• Cross section: 0.5 - 1.5 mm2, AWG 20 - 16

• Ext in: + and -

• Strip length: 9 mm / 0.35 in.

Other information Certifications

Environmental ratings

• IEC 61347-1, IEC 61347-2-13, IEC 62384 + A1, EN 55015 + A1,

• Ta range: -40°C...50°C / -40°F...122°F

EN 55022 + A1, IEC 61000-3-2, IEC 61547 + A1, IEC 62386-207 • CE

• Tc max: 90°C / 194°F (100/A) and 85°C / 185°F (100/M and 100/S) • For use in damp and dry locations

• ENEC by VDE • UL: Recognized Component for US and Canada (file no. E333135), according to UL1310 and UL8750. Class 2 output for US and Canada.

Control compatibility • DALI control gear • DMX512A and RDM explore & address (ANSI E1.20) control gear • Standard passive 0-10V switch controls

Europe, Rest of World

North America

eldoLED Europe bv

eldoLED America, Inc.

Other documentation and support Visit www.eldoled.com/ACsupport for further documentation such as

Luchthavenweg 18a

1762 Technology Drive #226

quick start guide, wiring diagram, tech sheet and 3D IGES files.

NL-5657 EB Eindhoven

San Jose, CA 95110

Warranty

The Netherlands

USA

T: +31 40 2054050

T: +1 408 451 9333

eldoLED represents and warrants that for a period of 3 (three) years, as

F: +31 40 2054058

F: +1 408 451 9335

of the date of invoice, Products materially meet the specifications and specifically agreed upon quality, both as stated in the applicable datasheet and/or written design-in specifications, or as stated in writing otherwise by eldoLED, provided that these specifications are explicitly

Sales support EU & Rest of World: sales@eldoled.com

designated by eldoLED as "warranted specifications".

Sales support US/Canada: nasales@eldoled.com

For the complete warranty text, visit www.eldoled.com/terms.

© 2012 eldoLED. All rights reserved. V5.0

More product documentation and eldoLED’s terms and conditions are available at www.eldoled.com.


Datasheet LINEARdrive 2**D

DC Series

8A Dimmable Constant Voltage LED Driver LINEARdrive 2**D is an 8A constant voltage LED driver with two LED outputs that are controlled over one or two channels. Targeted at larger (up to 8A), smoothly dimmable linear LED applications as in accent and cove lighting. Available in DMX/RDM and DALI compatible versions.

Applications • Accent and cove lighting

• Hospitality lighting

• Public area / park / street lighting

• Office lighting

• Signage / advertising lighting

• Display lighting

• Architectural lighting

• Retail lighting

Features & benefits Input • Voltage: 12 - 28 VDC • Current, max: 8A, irrespective of PSU voltage

Output • Voltage: 12V - 28V • Max load per output: 8A • Total max load: 8A

General • DALI compatible: LINEARdrive 210D and 220D • USITT DMX512A / RDM (ANSI E1.20) and LedSync compatible: LINEARdrive 212D and 222D • HydraDrive: 15-bit resolution • Dimming control: smooth dimming from 100% to 0.1% • LEDcode: sensor / extended feature set interface • ShowMaster: 9 default shows, up to 20 user-defined shows, uploadable via TOOLbox and ShowMaster DMX software (DMX compatible version only)

Product offering Description

Product

LINEARdrive DC, 8A, 12-24VDC, DALI, 1 ballast, constant voltage

LINEAR 210D

LIN210D1

LINEARdrive DC, 8A, 12-24VDC, DMX, 1 control channel, constant voltage

LINEAR 212D

LIN212D1

LINEARdrive DC, 8A, 12-24VDC, DALI, 2 ballasts, constant voltage

LINEAR 220D

LIN220D1

LINEARdrive DC, 8A, 12-24VDC, DMX, 2 control channels, constant voltage

LINEAR 222D

LIN222D1

© 2012 eldoLED. All rights reserved. V1.5

Order no.

More product documentation and eldoLED’s terms and conditions are available at www.eldoled.com.


Datasheet LINEARdrive 2**D

DC Series

Dimensions, weight, packaging 110 mm / 4.33”

• Weight: 120 g, 4.2 oz • Packaging: 12pcs / carton

23 mm / 0.91”

21.5 mm / 0.85”

ø 4.2 mm / 0.17” 10 mm / 0.39”

TC

30 mm / 1.18”

LINEARdrive 220D

50 mm / 1.97”

10 mm / 0.39” 153 mm / 6.02”

Connections Connectors LINEARdrive 2*2D

Connectors LINEARdrive 2*0D (cont’d)

• VDC: + and -

• DALI: + and - (x2)

• AUX VDC: +

• LED outputs: LED supply + and Group - (x2)

• Ext in: + and -

Wiring for LED group connectors

• DMX in: +, - and shield

• Cross section: 0.2 - 1.5 mm2, AWG 24 - 16

• LedSync thru: +, - and shield • LED outputs: LED supply + and Group - (x2)

• Strip length: 9 mm / 0.35 in.

Connectors LINEARdrive 2*0D

Wiring for other connectors

• VDC: + and -

• Cross section: 0.2 - 0.5 mm2, AWG 24 - 20 (LINEARdrive 2*2D)

• AUX VDC: +

0.2 - 1.5 mm2, AWG 24 - 16 (LINEARdrive 2*0D)

• Ext in: + and -

• Strip length: 9 mm / 0.35 in.

Other information Certifications

Environmental ratings

• CE

• Ta range: -20°C...50°C / -4°F...122°F

• IEC 61347, EN 55015, IEC 61003, EN 61547

• Tc max: 65°C / 149°F

• IEC 60929 Annex E, IEC 62386-101/102/207 (LINEARdrive 210D

• For use in dry locations

and 220D)

Control compatibility • DALI control gear • DMX512A and RDM explore & address (ANSI E1.20) control gear

Europe, Rest of World

North America

eldoLED Europe bv

eldoLED America, Inc.

Other documentation and support Visit www.eldoled.com/support for further documentation such as quick

Luchthavenweg 18a

1762 Technology Drive #226

start guide, wiring diagram, tech sheet and 3D IGES files.

NL-5657 EB Eindhoven

San Jose, CA 95110

The Netherlands

USA

T: +31 40 2054050

T: +1 408 451 9333

eldoLED represents and warrants that for a period of 3 (three) years, as

F: +31 40 2054058

F: +1 408 451 9335

of the date of invoice, Products materially meet the specifications and

Warranty

specifically agreed upon quality, both as stated in the applicable datasheet and/or written design-in specifications, or as stated in writing otherwise by eldoLED, provided that these specifications are explicitly Sales support EU & Rest of World: sales@eldoled.com

designated by eldoLED as "warranted specifications".

Sales support US/Canada: nasales@eldoled.com

For the complete warranty text, visit www.eldoled.com/terms.

© 2012 eldoLED. All rights reserved. V1.5

More product documentation and eldoLED’s terms and conditions are available at www.eldoled.com.


Datasheet V-Strip Power

V Series

32A Voltage Controlled RGB(W) LED Driver/Controller V Series

Small form factor

The V Series products are cost-effective driver/controllers for

The V-Strip Power has a

direct voltage controlled linear LED lighting applications.

small footprint:

The V Series driver/controllers can be used in a network or as standalone devices. ShowMaster, supported on all eldoLED

68 mm x 50mm x 14mm or 2.68” x 1.97” x 0.55”.

driver/controllers, allows you to upload show sequences for

High control resolution

use in standalone mode. Create and manage your own show

The V-Strip Power supports a

sequences using the TOOLbox and freely available PC soft-

15-bit control resolution per

ware.

output channel for accurate dimming and fine colour mixing.

The V Series driver/controllers are DMX- and LedSync-com-

Low EMI

patible, allowing 15-bit dimming and colour control and bidirec-

Slew-rate controlled dimming and shielded conductors keep

tional communication for driver configuration and temperature

the driver’s EMI emissions at a very low level.

read-out.

Features

V-Strip Power

• USITT DMX512A- and LedSync-compatible

The V-Strip Power is the ideal choice for powering all kinds of

• Small form factor: 68mm x 50mm / 2.68” x 1.97”

low-brightness LED packages requiring up to 32A (8A per

• Operating supply voltage range: 12V - 28V DC

channel) and is available in a 4-channel version.

• Delivers up to 32A (8A per channel)

Thanks to LedSync Out, the V-Strip Power allows daisy-chaining of linear SSL fixtures and can broadcast running show sequences to all connected V Series devices.

• High control resolution: 15-bit • DIN Rail (EN50022) mounting set available (optional)

Advantages • Highly integrated: no external boxes • Accurate, smooth dimming and high-res colour mixing • Drive and control per fixture • Easy network setup • Low EMI • Screw terminals allowing easy connection of leads

Example of an LED group wiring schematic

© 2009 eldoLED. All rights reserved. For more information, visit www.eldoled.com


Datasheet V-Strip Power

V Series

Electrical data

Network control (continued)

• Delivers up to 32A (8A per channel)

• Network resolution: 8 or 16 bit, set at

• Power output: 0 - 800W

factory or with TOOLbox and PC soft-

• Operating supply voltage range:

ware

12V-28V DC

• Network channels used by driver in 8-

• Reverse polarity protection • Processor: eldoLED FluxLogic 800

bit resolution: 4 • Network channels used by driver in 16-

Series

bit resolution: 8

• Independent LED groups: 4

Dynamic effects • Hydra Drive Algorithm Based Modula-

• Communication: bidirectional for driver configuration and temperature readout • Start address configuration: manually with TOOLbox and PC software or

tion

auto-addressing if daisy-chained

• Control of channel 1 (R), 2 (G), 3 (B)

• Contrast ratio: up to 2,000:1

• Nine standard shows or up to 20 customer-defined shows set at factory.

Thermal data

• Minimum ambient temperature: 0C (32F) • Storage ambient temperature: -40C to 95C (-40F to 203F) • Relative humidity: non-condensing

Mounting data • Mounting orientation: any • Mounting holes: for M3 screw (2) and • Mounting kit: DIN rail mounting

ShowMaster

point resolution

60C (140F)

M4 screw (2)

(LedSync only)

and 4 (W/A): 0 - 100% in 15-bit set

Environmental ratings • Maximum ambient temperature:

Dimensions • LxWxH: 68mm x 50mm x 14mm

• User-defined shows (ShowMaster): up

• Passive cooling

to 20 shows, via TOOLbox and PC

• Built-in protection against overheating

Network control

software. • Show selection: via TOOLbox and PC software or via external/remote or

• Network input: USITT DMX512A or

onboard switch

LedSync • Network output: LedSync • Network input/output: based on RS485 specification • Input signal update rate: 8ms

2.68” x 1.97” x 0.55”

Connections • Power: screw terminals (4) • Data: screw terminals (6) • External switch: screw terminals (1) • LED groups: screw terminals (8) • Network termination: jumper (1)

Ordering information Description

Product

Order nr

V-Strip Power 4 Channel voltage controlled

V-Strip/P 4045

VSP40451

DIN rail clip with alu spacer (optional)

DIN rail clip

DRC10101

V2.0 More information, application notes and eldoLED’s terms and conditions are available at www.eldoled.com. © 2009 eldoLED. All rights reserved. eldoLED Europe B.V. eldoLED America, Inc.

Luchthavenweg 18a 1762 Technology Drive # 22

5657 EB Eindhoven San Jose, CA95110

The Netherlands USA

T +31 40 2054050 T +1 408 451 9333

F +31 40 2054058 F +1 408 451 9335

info@eldoled.com info@eldoled.com


Datasheet V Series

In-fixture DC Series

Highly Integrated 4A/8A/32A Dimmable LED Drivers The V Series products are constant voltage LED drivers targeted at larger networked and smaller standalone installations that require dimmable, low-power (LED strips), general white or full-color LED lighting. The V-Strip Power and V-Strip Network are DMX and LedSync compatible, V-Strip Standalone is targeted at standalone setups. The drivers’ small size makes them ideally suited for in-fixture installation, leading to less cabling, increased design freedom and improved system cost.

Applications General white applications • Office lighting

• Signage / advertising lighting

• Public area / park / street lighting

• Architectural lighting

• Retail lighting

• Display lighting

• Entertainment lighting

• Signage / advertising lighting

• Full-colour / tunable white applications

• Stage lighting

• Façade lighting

• Decorative lighting

• Full-colour architectural lighting

• Retail display lighting

• Hospitality lighting

Static/dynamic full-colour applications

Features & benefits Input • Voltage range: 12-28VDC

Output • Voltage range: automatically selected • Load: V-Strip Power 32A (8A per group), V-Strip Network 8A (2A per group) V-Strip Standalone 4A (1A per group)

General • Breakthrough form factors for in-fixture installation • Drive, control and thermal protection per fixture • DMX512A and LedSync compatible * • HydraDrive: 15-bit resolution • Dimming control: smooth dimming from 100% to 0.1% • Programmable parameters via TOOLbox and free software * • ShowMaster: 9 default shows, up to 20 user-defined shows, uploadable via TOOLbox and PC software * * does not apply to V-Strip Standalone

Product offering Description

Product

Order no.

V-Strip Power, 32A, DMX, 4 control channels, constant voltage, 4x LED outputs, in-fixture

V-Strip/P 4045

VSP40451

V-Strip Network, 8A, DMX, 4 control channels, constant voltage, 4x LED outputs, in-fixture

V-Strip/N 4045

VSN40451

V-Strip Standalone, 4A, constant voltage, 4x LED outputs, in-fixture

V-Strip/S 4040

VSS40401

© 2012 eldoLED. All rights reserved. V1.0

More product documentation and eldoLED’s terms and conditions are available at www.eldoled.com.


Datasheet V Series

In-fixture DC Series

Dimensions and weight V-Strip Power / V-Strip Network

14 mm / 0.55”

• Weight V-Strip/P (left): 28 g, 0.99 oz

14 mm / 0.55”

• Weight V-Strip/N (right): 22 g, 0.78 oz

eldoLED

V-Strip Network

50 mm / 1.97”

50 mm / 1.97”

eldoLED V-Strip-P

68 mm / 2.68”

68 mm / 2.68”

V-Strip Standalone 10 mm / 0.39”

• Weight: 2.5 g, 0.09 oz eldoLED

16.5 mm / 0.65”

40 mm / 1.57”

Connections V-Strip Power and V-Strip Network

V-Strip Standalone

Connections

Connections

• Power: screw terminals (4)

• Power: solder pads (2)

• Data: screw terminals (6)

• LED groups: solder pads (6)

• External switch: screw terminals (2) • LED groups: screw terminals (8)

Wiring

Wiring

• Strip length: 4.5 mm / 0.18 in.

• Cross section: 0.25 - 1 mm2, AWG 24 - 18

• Cross section: 0.25 - 1 mm2, AWG 24 - 18

Mounting

• Strip length: 4.5 mm / 0.18 in.

• Mounting holes: for M3 screw (1)

Mounting • Mounting holes: for M3 screws (x2) and M4 screws (x2) • Ensure proper heat dissipation using e.g. a heat sink

Other information Control compatibility

Environmental ratings

• DMX512A control gear (does not apply to V-Strip Standalone)

• Ta range: 0°C...+50°C / 32°F...+122°F • For use in dry locations

Certifications

• Relative humidity: non-condensing

• CE

Europe, Rest of World

North America

Other documentation and support

eldoLED Europe bv

eldoLED America, Inc.

Visit www.eldoled.com/support for further documentation such as quick

Luchthavenweg 18a

1762 Technology Drive #226

start guide, wiring diagram, tech sheet and 3D IGES files.

NL-5657 EB Eindhoven

San Jose, CA 95110

Warranty

The Netherlands

USA

T: +31 40 2054050

T: +1 408 451 9333

eldoLED represents and warrants that for a period of 3 (three) years, as

F: +31 40 2054058

F: +1 408 451 9335

of the date of invoice, Products materially meet the specifications and specifically agreed upon quality, both as stated in the applicable datasheet and/or written design-in specifications, or as stated in writing otherwise by eldoLED, provided that these specifications are explicitly

Sales support EU & Rest of World: sales@eldoled.com

designated by eldoLED as "warranted specifications".

Sales support US/Canada: nasales@eldoled.com

For the complete warranty text, visit www.eldoled.com/terms.

© 2012 eldoLED. All rights reserved. V1.0

More product documentation and eldoLED’s terms and conditions are available at www.eldoled.com.


Datasheet L Series

In-fixture DC Series

Highly Integrated 15/20/30/50 Watt Dimmable LED Drivers The L Series products are constant current LED drivers with multiple LED outputs that are controlled over a one, two, three or four channels. They are targeted at larger networked and smaller standalone installations that require dimmable, high-power, general white or full-color LED lighting. The L Series LED drivers are renowned for their high efficiency (95%) and are DMX and LedSync compatible. The drivers’ small size makes them ideally suited for in-fixture installation, leading to less cabling, increased design freedom and improved system cost.

Applications General white applications • Office lighting

• High and Low Bay lighting

• Public area / park / street lighting

• Architectural lighting

• Signage / advertising lighting

• Display lighting

• Hospitality lighting

• Retail lighting

Static/dynamic full-colour applications • Entertainment lighting

• Signage / advertising lighting

• Full-colour / tunable white applications

• Stage lighting

• Façade lighting

• Decorative lighting

• Full-colour architectural lighting

• Retail display lighting

Features & benefits Input • Voltage range: 12-32VDC, see page 2 for data per model

Output • Current range: selectable current settings depending on model, see page 2 • Power: 15W, 20W, 30W or 50W max, depending on model

General • Breakthrough form factors for in-fixture installation • Drive, control and thermal protection per fixture • DMX512A and LedSync compatible • HydraDrive: 15-bit resolution • Dimming control: smooth dimming from 100% to 0.1% • High efficiency: 95% at full load due to single, high-precision current source • Programmable parameters via TOOLbox and FluxTool software • NTC thermistor interface

© 2012 eldoLED. All rights reserved. V1.1

More product documentation and eldoLED’s terms and conditions are available at www.eldoled.com.


Datasheet L Series

L-Dot Standard

Operating supply voltage

Power output

LED output current settings

24V-32V DC

0-50W

Default: 350mA

5.0 g

Onboard (over solder pads):

0.18 oz

6 mm / 0.24”

Weight

350mA, 460mA, 700mA, 900mA, 1,100mA,1,200mA 39.6 mm / 1.56”

With external resistor: all in-between values up to 1,500mA

L-Dot Nano

24V-28V DC

0-30W

6 mm / 0.24”

Default: 350mA

2.5 g

Onboard: n.a.

0.09 oz

With external resistor: 700mA - 1,000mA

29.9 mm / 1.18”

L-Dot Pico

12V-28V DC

0-15W

4.5 mm / 0.18”

Default: 350mA

2.5 g

Onboard: n.a.

0.09 oz

With external resistor: 700mA 25.4 mm / 1.00”

L-Strip Connector

24V-28V DC

0-30W

10.6 mm / 0.41”

Default: 350mA

17.5 g

Onboard (over jumper block):

0.62 oz

350mA, 460mA, 700mA, 900mA With external resistor: up to 1,000mA

24 mm / 0.94” L-Strip/C

eldoLED

105 mm / 4.13”

L-Strip Standard

24V-28V DC

0-20W

14 mm / 0.55”

Default: 350mA

6g

Onboard: n.a.

0.21 oz

With external resistor: 700mA

24 mm / 0.94”

34 mm / 1.34”

L-Dot Connector

24V-32V DC 16 mm / 0.63”

0-50W

Default: 350mA

26 g

Onboard (over jumper block):

0.92 oz

350mA, 460mA, 700mA, 900mA, 1,100mA, 1,200mA With external resistor: all 50 mm / 1.97” eldoLED

L-Dot/C

in-between values up to 1,500mA

68 mm / 2.68”


In-fixture DC Series Connections

Description

Product

Order number

Power: solder pads (2)

L-Dot Standard, 50W, DMX, 1 control channel, constant current

L-Dot/S 1055

LDS10552

Data: solder pads (5)

L-Dot Standard, 50W, DMX, 2 control channels, constant current

L-Dot/S 2055

LDS20552

NTC: solder pads (2)

L-Dot Standard, 50W, DMX, 3 control channels, constant current

L-Dot/S 3055

LDS30552

Switch (in-fixture): solder pads (2)

L-Dot Standard, 50W, DMX, 4 control channels, constant current

L-Dot/S 4055

LDS40552

LED current setting: solder pads (2) LED groups: solder pads (5)

Power: solder pads (2)

L-Dot Nano, 30W, DMX, 1 control channel, constant current

L-Dot/N 1025

LDN10252

Data: solder pads (3)

L-Dot Nano, 30W, DMX, 2 control channels, constant current

L-Dot/N 2025

LDN20252

NTC: solder pads (2)

L-Dot Nano, 30W, DMX, 3 control channels, constant current

L-Dot/N 3025

LDN30252

Switch: n.a.

L-Dot Nano, 30W, DMX, 4 control channels, constant current

L-Dot/N 4025

LDN40252

LED current setting: solder pads (2) LED groups: solder pads (5)

Power: solder pads (2)

L-Dot Pico, 15W, DMX, 1 control channel, constant current

L-Dot/P 1015

LDP10151

Data: solder pads (3)

L-Dot Pico, 15W, DMX, 2 control channels, constant current

L-Dot/P 2015

LDP20151

NTC: solder pads (2)

L-Dot Pico, 15W, DMX, 3 control channels, constant current

L-Dot/P 3015

LDP30151

Switch: n.a.

L-Dot Pico, 15W, DMX, 4 control channels, constant current

L-Dot/P 4015

LDP40151

Power: screw terminals (4)

L-Strip Connector, 30W, DMX, 1 control channel, constant current

L-Strip/C 1025

LSC10252

LED current setting: solder pads (2) LED groups: solder pads (5)

Data: screw terminals (6)

L-Strip Connector, 30W, DMX, 2 control channels, constant current

L-Strip/C 2025

LSC20252

NTC: pins (2)

L-Strip Connector, 30W, DMX, 3 control channels, constant current

L-Strip/C 3025

LSC30252

Switch (external): solder pad (1)

L-Strip Connector, 30W, DMX, 4 control channels, constant current

L-Strip/C 4025

LSC40252

Power: pins (2)

L-Strip Standard, 20W, DMX, 1 control channel, constant current

L-Strip/S 1025

LSS10251

Data: pins (5)

L-Strip Standard, 20W, DMX, 2 control channels, constant current

L-Strip/S 2025

LSS20251

NTC: pins (2)

L-Strip Standard, 20W, DMX, 3 control channels, constant current

L-Strip/S 3025

LSS30251

Switch (external): pin (1)

L-Strip Standard, 20W, DMX, 4 control channels, constant current

L-Strip/S 4025

LSS40251

Power: screw terminals (2)

L-Dot Connector, 50W, DMX, 1 control channel, constant current

L-Dot/C 1055

LDC10552

LED current setting: pin (2) LED groups: pins (5)

LED current setting: pin (2) LED groups: pins (5)

Data: screw terminals (5)

L-Dot Connector, 50W, DMX, 2 control channels, constant current

L-Dot/C 2055

LDC20552

NTC: screw terminals (2)

L-Dot Connector, 50W, DMX, 3 control channels, constant current

L-Dot/C 3055

LDC30552

Switch (in-fixture): screw terminals (2)

L-Dot Connector, 50W, DMX, 4 control channels, constant current

L-Dot/C 4055

LDC40552

LED current setting: jumper block (1) LED groups: screw terminals (5)


Datasheet L Series

In-fixture DC Series

Other information Wiring L-Dot/C and L-Strip/C

Mounting

• Cross section: 0.25 - 1 mm2, AWG 24 - 18

• Ensure proper heat dissipation using e.g. a heat sink

• Strip length: 4.5 mm / 0.18 in.

• Mounting holes: L-Dot Standard: for M3 screws (x2)

Wiring L-Dot/S, L-Dot/N, L-Dot/P, L-Strip/S

L-Dot Nano: for M3 screws (x1)

• Cross section: 0.25 - 0.75 mm2, AWG 24 - 20

L-Dot Pico: for M2 screws (x1)

• Strip length: 4.5 mm / 0.18 in.

L-Strip Connectors: for M3 screws (x2) L-Strip Standard: for M3 screws (x1)

Environmental ratings

L-Dot Connector: for M3 screws (x2) and M4 screws (x2)

• Ta range: 0°C...+50°C / 32°F...+122°F • For use in dry locations

Certifications

• Relative humidity: non-condensing

• IEC 61347-1, IEC 61347-2-13 • CE

Control compatibility • DMX512A control gear

Europe, Rest of World

North America

Other documentation and support

eldoLED Europe bv

eldoLED America, Inc.

Visit www.eldoled.com/support for further documentation such as quick

Luchthavenweg 18a

1762 Technology Drive #226

start guide, wiring diagram, tech sheet and 3D IGES files.

NL-5657 EB Eindhoven

San Jose, CA 95110

Warranty

The Netherlands

USA

T: +31 40 2054050

T: +1 408 451-9333

eldoLED represents and warrants that for a period of 3 (three) years, as

F: +31 40 2054058

F: +1 408 451-9335

of the date of invoice, Products materially meet the specifications and

E: info@eldoled.com

specifically agreed upon quality, both as stated in the applicable datasheet and/or written design-in specifications, or as stated in writing otherwise by eldoLED, provided that these specifications are explicitly

Sales support US/Canada: nasales@eldoled.com

designated by eldoLED as "warranted specifications".

Sales support Rest of the World: sales@eldoled.com

For the complete warranty text, visit www.eldoled.com/terms.

© 2012 eldoLED. All rights reserved. V1.1

More product documentation and eldoLED’s terms and conditions are available at www.eldoled.com.


Datasheet L-Dot Connector

L Series

Highly Integrated 50 Watt LED Driver/Controller L Series

Small form factor: in-fixture installation

The L Series products are highly integrated, constant current

The small size of the

driver/controllers for high-brightness LED lighting applications,

driver/controller makes it

targeted at in-fixture installation. The L Series driver/control-

ideally suited for in-fixture

lers can be used in a network or as standalone devices. Show-

installation, leading to less

Master, supported on all eldoLED driver/controllers, allows

cabling, increased design

you to upload show sequences for use in standalone mode.

freedom and improved

Create and manage your own show sequences using the

system cost for luminaire

TOOLbox and freely available PC software.

manufacturers.

The L Series driver/controllers feature one LED current source for up to 4 LED groups. They are DMX- and LedSync-compatible, allowing 15-bit dimming and colour control and bidirectional communication for driver configuration and temperature read-out.

Low EMI Shorter LED wires due to in-fixture installation, slew-rate controlled dimming, shielded conductors and the use of a single LED current source all contribute to keeping the driver’s EMI emissions at a very low level.

L-Dot Connector The L-Dot Connector is the ideal choice for powering 350mA 1.5A, high-brightness LEDs and is available in a 1-, 2-, 3- and 4-channel version. Thanks to LedSync Out, the L-Dot Connector allows daisy-chaining of SSL fixtures and can broadcast

Robust thermal management The L Series’ high efficiency results in less heat at the same light output. This means you can have an equal light output from a smaller package - the driver/controller can even share

running show sequences to all connected L Series devices.

the heat sink of the LED engine, lowering total system costs.

Single current source, multiple LED colour groups

mal protection, including LED throttling, a graceful decrease of

eldoLED technology drives up to 4 LED (colour) groups from

light output until normal operating temperatures are reached.

a single, high-precision LED current source, which not only gives the L Series driver/controllers a power efficiency of up to 95% but has also resulted in a break-through form factor.

Furthermore, its NTC interface enables various ways of ther-

Features • USITT DMX512A- and LedSync-compatible • Break-through form factor: 68mm x 50mm / 2.68” x 1.97” • Power output of up to 50W • Onboard thermal interface for NTC

Advantages • In-fixture installation • Accurate, smooth dimming and high-res colour mixing • Power efficiency of up to 95% • Drive, control and thermal protection per fixture

Example of an LED group wiring schematic

• Easy network setup • Low EMI

High control resolution The L-Dot Connector supports a 15-bit control resolution per output channel for accurate dimming and fine colour mixing.

© 2009 eldoLED. All rights reserved. For more information, visit www.eldoled.com


Datasheet L-Dot Connector Electrical data

L Series

Network control

• LED current settings:

Connections (continued)

• Network input: USITT DMX512A or

with onboard jumper block: 350mA,

LedSync

• LED groups: screw terminals (5)

460mA, 700mA, 900mA, 1.1A, 1.2A

• Network output: LedSync

with external resistor: all in between

• Network input/output: based on RS485

values up to 1.5A

• LED current setting: jumper block (1)

specification

• Power output range: 0-50W

• Input signal update rate: 8ms

• Operating supply voltage range:

• Network resolution: 8 or 16 bit, set at

24V-32V DC

factory or with TOOLbox and PC soft-

• Reverse polarity protection

ware

• Efficiency: up to 95%

• Network channels used by driver in 8-

• Processor: eldoLED FluxLogic 1600

bit resolution: 1, 2, 3, or 4

Series

• Network channels used by driver in 16-

• Independent LED groups: 1, 2, 3 or 4, depending on driver version

bit resolution: 2, 4, 6 or 8 • Communication: bidirectional for driver configuration and temperature readout

Dynamic effects • Hydra Drive Algorithm Based Modulation

• Start address configuration (LedSync): manually with TOOLbox and PC software or auto-addressing if daisy-

• Control of channel 1 (R), 2 (G), 3 (B)

chained

and 4 (W/A): 0 - 100% in 15-bit set

• Start address configuration (DMX):

point resolution

manually with TOOLbox and PC soft-

• Contrast ratio: up to 8,000:1

ware

Thermal data

• Nine standard shows or up to 20 cus-

Heat sink for driver must be able to dissipate 10% of power consumed by LED engine. E.g. If LEDs consume

tomer-defined shows set at factory. • User-defined shows (ShowMaster): up to 20 shows, via TOOLbox and PC

50W, driver requires a 5W heat sink. • Built-in protection against overheating • NTC interface: for connection of negative temperature coefficient (NTC). NTC enables temperature read-out of driver or LED engine and can be used for thermal throttling function.

Environmental ratings • Maximum ambient temperature: 60C (140F) • Minimum ambient temperature: 0C (32F) • Storage ambient temperature: -40C to 95C (-40F to 203F) • Relative humidity: non-condensing

ShowMaster

• Passive cooling: heat sink mounting.

Sample schematic of a Lamina Titan RGB

software.

Mounting data • Mounting orientation: any • Mounting holes: for M3 screws (2) and M4 screws (2)

Dimensions

• Show selection: via external or onboard switch or TOOLbox and PC

• LxWxH: 68mm x 50mm x 14mm

software

2.68” x 1.97” x 0.55”

Connections • Power: screw terminals (2) • Data: screw terminals (5) • NTC: screw terminals (2) • In-fixture switch: screw terminals (2)

Ordering information Description

Product

Order nr

L-Dot Connector 1 Channel 50W

L-Dot/C 1055

LDC10552

L-Dot Connector 2 Channel 50W

L-Dot/C 2055

LDC20552

L-Dot Connector 3 Channel 50W

L-Dot/C 3055

LDC30552

L-Dot Connector 4 Channel 50W

L-Dot/S 4055

LDS40552 V4.0

More information, application notes and eldoLED’s terms and conditions are available at www.eldoled.com. © 2009 eldoLED. All rights reserved. eldoLED Europe B.V. eldoLED America, Inc.

Luchthavenweg 18a 1762 Technology Drive # 22

5657 EB Eindhoven San Jose, CA95110

The Netherlands USA

T +31 40 2054050 T +1 408 451 9333

F +31 40 2054058 F +1 408 451 9335

info@eldoled.com info@eldoled.com


Datasheet L Series

In-fixture DC Series

Highly Integrated 15/20/30/50 Watt Dimmable LED Drivers The L Series products are constant current LED drivers with multiple LED outputs that are controlled over a one, two, three or four channels. They are targeted at larger networked and smaller standalone installations that require dimmable, high-power, general white or full-color LED lighting. The L Series LED drivers are renowned for their high efficiency (95%) and are DMX and LedSync compatible. The drivers’ small size makes them ideally suited for in-fixture installation, leading to less cabling, increased design freedom and improved system cost.

Applications General white applications • Office lighting

• High and Low Bay lighting

• Public area / park / street lighting

• Architectural lighting

• Signage / advertising lighting

• Display lighting

• Hospitality lighting

• Retail lighting

Static/dynamic full-colour applications • Entertainment lighting

• Signage / advertising lighting

• Full-colour / tunable white applications

• Stage lighting

• Façade lighting

• Decorative lighting

• Full-colour architectural lighting

• Retail display lighting

Features & benefits Input • Voltage range: 12-32VDC, see page 2 for data per model

Output • Current range: selectable current settings depending on model, see page 2 • Power: 15W, 20W, 30W or 50W max, depending on model

General • Breakthrough form factors for in-fixture installation • Drive, control and thermal protection per fixture • DMX512A and LedSync compatible • HydraDrive: 15-bit resolution • Dimming control: smooth dimming from 100% to 0.1% • High efficiency: 95% at full load due to single, high-precision current source • Programmable parameters via TOOLbox and FluxTool software • NTC thermistor interface

© 2012 eldoLED. All rights reserved. V1.1

More product documentation and eldoLED’s terms and conditions are available at www.eldoled.com.


Datasheet L Series

L-Dot Standard

Operating supply voltage

Power output

LED output current settings

24V-32V DC

0-50W

Default: 350mA

5.0 g

Onboard (over solder pads):

0.18 oz

6 mm / 0.24”

Weight

350mA, 460mA, 700mA, 900mA, 1,100mA,1,200mA 39.6 mm / 1.56”

With external resistor: all in-between values up to 1,500mA

L-Dot Nano

24V-28V DC

0-30W

6 mm / 0.24”

Default: 350mA

2.5 g

Onboard: n.a.

0.09 oz

With external resistor: 700mA - 1,000mA

29.9 mm / 1.18”

L-Dot Pico

12V-28V DC

0-15W

4.5 mm / 0.18”

Default: 350mA

2.5 g

Onboard: n.a.

0.09 oz

With external resistor: 700mA 25.4 mm / 1.00”

L-Strip Connector

24V-28V DC

0-30W

10.6 mm / 0.41”

Default: 350mA

17.5 g

Onboard (over jumper block):

0.62 oz

350mA, 460mA, 700mA, 900mA With external resistor: up to 1,000mA

24 mm / 0.94” L-Strip/C

eldoLED

105 mm / 4.13”

L-Strip Standard

24V-28V DC

0-20W

14 mm / 0.55”

Default: 350mA

6g

Onboard: n.a.

0.21 oz

With external resistor: 700mA

24 mm / 0.94”

34 mm / 1.34”

L-Dot Connector

24V-32V DC 16 mm / 0.63”

0-50W

Default: 350mA

26 g

Onboard (over jumper block):

0.92 oz

350mA, 460mA, 700mA, 900mA, 1,100mA, 1,200mA With external resistor: all 50 mm / 1.97” eldoLED

L-Dot/C

in-between values up to 1,500mA

68 mm / 2.68”


In-fixture DC Series Connections

Description

Product

Order number

Power: solder pads (2)

L-Dot Standard, 50W, DMX, 1 control channel, constant current

L-Dot/S 1055

LDS10552

Data: solder pads (5)

L-Dot Standard, 50W, DMX, 2 control channels, constant current

L-Dot/S 2055

LDS20552

NTC: solder pads (2)

L-Dot Standard, 50W, DMX, 3 control channels, constant current

L-Dot/S 3055

LDS30552

Switch (in-fixture): solder pads (2)

L-Dot Standard, 50W, DMX, 4 control channels, constant current

L-Dot/S 4055

LDS40552

LED current setting: solder pads (2) LED groups: solder pads (5)

Power: solder pads (2)

L-Dot Nano, 30W, DMX, 1 control channel, constant current

L-Dot/N 1025

LDN10252

Data: solder pads (3)

L-Dot Nano, 30W, DMX, 2 control channels, constant current

L-Dot/N 2025

LDN20252

NTC: solder pads (2)

L-Dot Nano, 30W, DMX, 3 control channels, constant current

L-Dot/N 3025

LDN30252

Switch: n.a.

L-Dot Nano, 30W, DMX, 4 control channels, constant current

L-Dot/N 4025

LDN40252

LED current setting: solder pads (2) LED groups: solder pads (5)

Power: solder pads (2)

L-Dot Pico, 15W, DMX, 1 control channel, constant current

L-Dot/P 1015

LDP10151

Data: solder pads (3)

L-Dot Pico, 15W, DMX, 2 control channels, constant current

L-Dot/P 2015

LDP20151

NTC: solder pads (2)

L-Dot Pico, 15W, DMX, 3 control channels, constant current

L-Dot/P 3015

LDP30151

Switch: n.a.

L-Dot Pico, 15W, DMX, 4 control channels, constant current

L-Dot/P 4015

LDP40151

Power: screw terminals (4)

L-Strip Connector, 30W, DMX, 1 control channel, constant current

L-Strip/C 1025

LSC10252

LED current setting: solder pads (2) LED groups: solder pads (5)

Data: screw terminals (6)

L-Strip Connector, 30W, DMX, 2 control channels, constant current

L-Strip/C 2025

LSC20252

NTC: pins (2)

L-Strip Connector, 30W, DMX, 3 control channels, constant current

L-Strip/C 3025

LSC30252

Switch (external): solder pad (1)

L-Strip Connector, 30W, DMX, 4 control channels, constant current

L-Strip/C 4025

LSC40252

Power: pins (2)

L-Strip Standard, 20W, DMX, 1 control channel, constant current

L-Strip/S 1025

LSS10251

Data: pins (5)

L-Strip Standard, 20W, DMX, 2 control channels, constant current

L-Strip/S 2025

LSS20251

NTC: pins (2)

L-Strip Standard, 20W, DMX, 3 control channels, constant current

L-Strip/S 3025

LSS30251

Switch (external): pin (1)

L-Strip Standard, 20W, DMX, 4 control channels, constant current

L-Strip/S 4025

LSS40251

Power: screw terminals (2)

L-Dot Connector, 50W, DMX, 1 control channel, constant current

L-Dot/C 1055

LDC10552

LED current setting: pin (2) LED groups: pins (5)

LED current setting: pin (2) LED groups: pins (5)

Data: screw terminals (5)

L-Dot Connector, 50W, DMX, 2 control channels, constant current

L-Dot/C 2055

LDC20552

NTC: screw terminals (2)

L-Dot Connector, 50W, DMX, 3 control channels, constant current

L-Dot/C 3055

LDC30552

Switch (in-fixture): screw terminals (2)

L-Dot Connector, 50W, DMX, 4 control channels, constant current

L-Dot/C 4055

LDC40552

LED current setting: jumper block (1) LED groups: screw terminals (5)


Datasheet L Series

In-fixture DC Series

Other information Wiring L-Dot/C and L-Strip/C

Mounting

• Cross section: 0.25 - 1 mm2, AWG 24 - 18

• Ensure proper heat dissipation using e.g. a heat sink

• Strip length: 4.5 mm / 0.18 in.

• Mounting holes: L-Dot Standard: for M3 screws (x2)

Wiring L-Dot/S, L-Dot/N, L-Dot/P, L-Strip/S

L-Dot Nano: for M3 screws (x1)

• Cross section: 0.25 - 0.75 mm2, AWG 24 - 20

L-Dot Pico: for M2 screws (x1)

• Strip length: 4.5 mm / 0.18 in.

L-Strip Connectors: for M3 screws (x2) L-Strip Standard: for M3 screws (x1)

Environmental ratings

L-Dot Connector: for M3 screws (x2) and M4 screws (x2)

• Ta range: 0°C...+50°C / 32°F...+122°F • For use in dry locations

Certifications

• Relative humidity: non-condensing

• IEC 61347-1, IEC 61347-2-13 • CE

Control compatibility • DMX512A control gear

Europe, Rest of World

North America

Other documentation and support

eldoLED Europe bv

eldoLED America, Inc.

Visit www.eldoled.com/support for further documentation such as quick

Luchthavenweg 18a

1762 Technology Drive #226

start guide, wiring diagram, tech sheet and 3D IGES files.

NL-5657 EB Eindhoven

San Jose, CA 95110

Warranty

The Netherlands

USA

T: +31 40 2054050

T: +1 408 451-9333

eldoLED represents and warrants that for a period of 3 (three) years, as

F: +31 40 2054058

F: +1 408 451-9335

of the date of invoice, Products materially meet the specifications and

E: info@eldoled.com

specifically agreed upon quality, both as stated in the applicable datasheet and/or written design-in specifications, or as stated in writing otherwise by eldoLED, provided that these specifications are explicitly

Sales support US/Canada: nasales@eldoled.com

designated by eldoLED as "warranted specifications".

Sales support Rest of the World: sales@eldoled.com

For the complete warranty text, visit www.eldoled.com/terms.

© 2012 eldoLED. All rights reserved. V1.1

More product documentation and eldoLED’s terms and conditions are available at www.eldoled.com.


Datasheet LM Series

In-fixture DC Series

Highly Integrated 40/50/150 Watt Dimmable LED Drivers The LM Series products are constant current LED drivers with multiple LED outputs that are controlled over three or four channels. They are targeted at larger networked and smaller standalone installations that require dimmable, high-power, general white or full-colour LED lighting. The LM Series LED drivers are renowned for their high power output and are DMX and LedSync compatible. The drivers’ small size makes them ideally suited for in-fixture installation, leading to less cabling, increased design freedom and improved system cost.

Applications General white applications • Office lighting

• Signage / advertising lighting

• Public area / park / street lighting

• Architectural lighting

• Retail lighting

• Display lighting

• Entertainment lighting

• Signage / advertising lighting

• Full-colour / tunable white applications

• Stage lighting

• Façade lighting

• Decorative lighting

• Full-colour architectural lighting

• Retail display lighting

• Hospitality lighting

Static/dynamic full-colour applications

Features & benefits Input • Voltage range: 24-32VDC

Output • Current range: via onboard jumper block per LED group. 350mA and 700mA (LM-Dot/P) or 350mA, 700mA, 1,000mA and 1,400mA (LM-Dot/C and LM-Dot/S) • Power: max 40W, 50W or 150W

General • Ideal form factors for in-fixture installation • Drive, control and thermal protection per fixture • USITT DMX512A and LedSync compatible • HydraDrive: 15-bit resolution • Dimming control: smooth dimming from 100% to 0.1% • ShowMaster: 9 default shows, up to 20 user-defined shows, uploadable via TOOLbox and PC software • Reverse polarity protection • NTC thermistor interface

Product offering Description

Product

Order no.

LM-Dot Connector, 150W, DMX, 3 control channels, constant current, 4x LED outputs, in-fixture

LM-Dot/C 3155

LMC31551

LM-Dot Connector, 150W, DMX, 4 control channels, constant current, 4x LED outputs, in-fixture

LM-Dot/C 4155

LMC41551

LM-Dot Standard, 150W, DMX, 3 control channels, constant current, 4x LED outputs, in-fixture

LM-Dot/S 3155

LMS31551

LM-Dot Standard, 150W, DMX, 4 control channels, constant current, 4x LED outputs, in-fixture

LM-Dot/S 4155

LMS41551

LM-Dot Pico, 40W, DMX, 3 control channels, constant current, 4x LED outputs, in-fixture

LM-Dot/P 3045

LMP30451

LM-Dot Pico, 50W, DMX, 4 control channels, constant current, 4x LED outputs, in-fixture

LM-Dot/P 4055

LMP40551

© 2012 eldoLED. All rights reserved. V1.0

More product documentation and eldoLED’s terms and conditions are available at www.eldoled.com.


Datasheet LM Series

In-fixture DC Series

Dimensions and weight LM-Dot Connector / LM-Dot Standard

14 mm / 0.55”

• Weight LM-Dot/C (left): 37.5 g, 1.32 oz

7.78 mm / 0.31”

• Weight LM-Dot/S (right): 29 g, 1.02 oz

50 mm / 1.97”

50 mm / 1.97” eldoLED

eldoLED

LM-Dot/C

LM-Dot/C

92 mm / 3.62”

92 mm / 3.62”

LM-Dot Pico

14 mm / 0.55”

• Weight: 27.5 g, 0.97 oz

50 mm / 1.97”

eldoLED LM-Dot/Pico

68 mm / 2.68”

Connections Connections LM-Dot/C and LM-Dot/P

Connections LM-Dot/S - cont’d

• Power: screw terminals (2)

• External switch: solder pads (2)

• Data: screw terminals (6)

• LED groups: solder pads (8)

• NTC: screw terminals (2)

Wiring

• Extermal switch: screw terminals (2)

• Cross section: 0.25 - 1 mm2, AWG 24 - 18

• LED groups: screw terminals (8)

• Strip length: 4.5 mm / 0.18 in.

Connections LM-Dot/S

Mounting

• Power: solder pads (2)

• Mounting holes: for M3 screws (x2) and M4 screws (x2)

• Data: solder pads (5)

• Mounting kit: DIN rail mounting

• NTC: solder pads (2)

• Ensure proper heat dissipation using e.g. a heat sink

Other information Control compatibility

Environmental ratings

• DMX512A control gear

• Ta range: 0°C...+50°C / 32°F...+122°F • For use in dry locations

Certifications

• Relative humidity: non-condensing

• IEC 61347-1, IEC 61347-2-13 • CE

Europe, Rest of World

North America

Other documentation and support

eldoLED Europe bv

eldoLED America, Inc.

Visit www.eldoled.com/support for further documentation such as quick

Luchthavenweg 18a

1762 Technology Drive #226

start guide, wiring diagram, tech sheet and 3D IGES files.

NL-5657 EB Eindhoven

San Jose, CA 95110

Warranty

The Netherlands

USA

T: +31 40 2054050

T: +1 408 451 9333

eldoLED represents and warrants that for a period of 3 (three) years, as

F: +31 40 2054058

F: +1 408 451 9335

of the date of invoice, Products materially meet the specifications and specifically agreed upon quality, both as stated in the applicable datasheet and/or written design-in specifications, or as stated in writing otherwise by eldoLED, provided that these specifications are explicitly

Sales support EU & Rest of World: sales@eldoled.com

designated by eldoLED as "warranted specifications".

Sales support US/Canada: nasales@eldoled.com

For the complete warranty text, visit www.eldoled.com/terms.

© 2012 eldoLED. All rights reserved. V1.0

More product documentation and eldoLED’s terms and conditions are available at www.eldoled.com.


Datasheet Dimmable 12VAC LED Drivers

eldoLED Technologies

Dimmable 12VAC LED Drivers Dimmable 12VAC LED drivers eldoLED 12VAC technology focuses on general white lighting applications in both retrofit and new LED luminairs. In both markets, light quality, efficiency and lifetime are important elements. In addition, compatibility with existing infrastructure such as existing lamp form factor, transformers and dimmers is a key requirement for retrofit applications. The 12VAC platform is highly scalable in both power and fea-

5W 12VAC driver

ture set. It is the basis for 5W, 8W and 10W drivers and is prepared for advanced features like taking in sensor inputs. The ‘multiple group - single current source’ approach is available as an option to enable dimming dependent colour temperature.

There is a lot of existing infrastructure in 12VAC applications. In terms of compatibility, LED-based lamps for retrofit applications need to be compatible with a wide variety of transformers - electronic as well as magnetic - and triac or phase-cut (lead-

High efficiency and high power factor In AC operation, eldoLED’s 12VAC drivers run at a typical efficiency of around 85% (92% typ in DC operation). Most retrofit form factors are thermally constrained. Higher energy efficiency in these applications will lead to either lower operating temperatures with similar light output - increasing expected lifetime, or to similar operating temperatures with higher light output. The eldoLED 12VAC driver power factor is > 0.8 typical. Power factor is becoming a key parameter in many regulations. The higher power factor leads to lower apparent power - helping counter grid congestion.

ing and trailing edge) dimmers. The energy efficiency of LEDs means the load for the transformer and dimmers changes: a much lower and less resistive load. eldoLED 12VAC technology works well with most transformers and dimmers.

Robust thermal management Thermal control is important in ensuring expected lifetimes. eldoLED 12VAC technology uses several methods to ensure electronics and LEDs maintain normal operating temperatures. The electronics have built-in over temperature protection. Optionally, an NTC thermistor can be used to accurately monitor system temperatures and control LED power. When

No ‘off’ - no flicker LEDs have a very fast response time, especially compared to incandescent bulbs. Where a halogen lamp will still emit a - to the human eye - stable light output at line cycles of 50-60Hz, an LED-based lamp at full on will show visible flicker in the 100-120Hz range. Dimming prolongs the ‘off’ periods with noticably more flicker. eldoLED 12VAC solutions rely on Hybrid dimming technology. This means that the LED is on throughout the entire line cycle - no off means no flicker - even when dimming through triac or phase-cut dimmers.

Retrofit applications: transformers and dimmers

needed, a graceful decrease of power (light output) will ensure that normal operating temperatures are respected.

Features • LED current: 425mA - 1,000mA • LED Vf: up to 13.2V • Optional interface for occupancy sensor or daylight control device • Dimming dependent colour temperature

Advantages • Flicker-free dimming down to 10% • Available in retrofit form factors • Fast custimization for customer-specific applications © 2010 eldoLED. All rights reserved. For more information, visit www.eldoled.com


Datasheet Dimmable 12VAC LED Drivers Electrical data: input • Line voltage: 11-15VAC 11-18VDC • Maximum line current: 1A (10W) • Line frequency: 50/60 Hz • Efficiency: 85% (AC operation) 92% (DC operation)

Thermal data

• Life/MTBF at Ta +50C: MTBF: 700,000 hrs Life expectancy: 35,000 hrs

Design choice • LED topology: 2 LEDs in series:

• Power factor: 0.8

Electrical data: output • Maximum power output: 5W, 8W, 10W • Voltage output: typical 7-10VDC, max. 13VDC • LED output current range: 425mA - 1,000mA • Independent LED groups: up to 2

Dynamic effects • Hybrid HydraDrive • Contrast ratio: > 100 : 1

12VAC LED driver demo board with LEDs

Vf: 6.4V Efficiency: 83% Power factor: 0.89 3 LEDs in series:

eldoLED Technologies Environmental ratings • Ambient temperature range: -20C ... +50C (-4F ... +122F) • Storage ambient temperature: -40C ... +85C (-40F ... +185F) • Relative humidity: non-condensing

Compatibility • For the most recent transformers compatibility list, go to www.eldoled.com/ 12VAC_compatibility

Vf: 9.6V Efficiency: 87% Power factor: 0.84 4 LEDs in series: Vf: 13.2V Efficiency: 91% Power factor: 0.8

10W 12VAC LED driver

5W 12VAC LED driver

V1.0 More information, application notes and eldoLED’s terms and conditions are available at www.eldoled.com. © 2010 eldoLED. All rights reserved eldoLED Europe bv eldoLED America, Inc.

Luchthavenweg 18a 5657 EB Eindhoven 1762 Technology Drive # 226 San Jose, CA95110

The Netherlands USA

T +31 40 2054050 T +1 408 451 9333

F +31 40 2054058 F +1 408 451 9335

info@eldoled.com info@eldoled.com


Datasheet DALI-to-DMX Bridge

Accessories

DALI-to-DMX Bridge eldoLED bridges eldoLED network features are based on the LedSync protocol. All eldoLED products support LedSync and have built-in DMX compatibility. A number of bridges are offered that allow (1) the default LedSync/DMX universe to communicate with other network protocols such as DALI and 0-10V, or (2) networking over RF instead of wired solutions.

DALI-to-DMX bridge The eldoLED DALI-to-DMX bridge translates up to 32 DALI ballast values into DMX signals. The bridge is ideally suited to extend existing DALI lighting installations with a DMX uni-

The DALI-to-DMX bridge

verse, combining the best of both worlds in one hybrid network

Allocating a start address to multiple luminaires

consisting of DALI and DMX luminaires.

Grouping luminaires with exactly the same behavior is easy in

The bridge’s input side is completely DALI-compatible, meaning you can use all popular DALI control devices and commissioning tools to control and configure groups and scenes in DALI the way you are used to.

DMX. All it takes is setting those luminaires to the same DMX start address. In short, combining the advantages of DALI and DMX allows you to build a far larger yet easy-to-control network.

The advantages of the DMX output side of the DALI-to-DMX

Form factor

bridge include the possibility of c hoosing the network resolu-

The DALI-to-DMX bridge measures 68mm by 50mm or

tion and using the same DMX address for multiple luminaires.

2.68” by 1.97”. DIN rail clip and backing plate are available for

The DALI-to-DMX bridge autoconfigures the number of DMX

easy installation in standard electric boxes.

channels to the number of configured DALI ballasts.

Configuring network resolution on DMX side DMX network resolution (number of bits used to send a set

Features • Conversion of 32 DALI ballasts into DMX512-compatible signals

point over the network) can be set to either 8 or 16 bit via the

• Broadcast and replication mode

bridge’s DIP switch. In 8-bit mode, every DALI ballast value is

• Operating supply voltage range: 12V - 32V DC

translated into one 8-bit DMX channel. In 16-bit mode, two

• DMX network resolution configurable by way of DIP switch

DMX channels are used per DALI ballast value. 16-bit mode enables a 15-bit resolution fade, resulting in a smooth transition between set points, invisible to the human eye.

Advantages • Enables hybrid DALI-DMX network • Allows daisy-chaining /auto-addressing of luminaires • Smooth transition between set points

Broadcast mode for daisy-chaining The bridge broadcasts and replicates the DALI ballast settings

• Easy connection of power, DALI and DMX

over a maximum of 256 DMX channels with a 16ms update

• Easy setup and installation

rate. The broadcast mode and set point replication gives you the advantage of daisy-chaining and auto-addressing luminaires, which is especially useful when networking over long cable distances. © 2009 eldoLED. All rights reserved. For more information, visit www.eldoled.com


Datasheet DALI-to-DMX Bridge Electrical data

Accessories

Mounting data

• Operating supply voltage range: 12V - 32V DC IN

Thermal data

• Mounting orientation: any

• Cooling: passive

• Mounting holes: for M3 screws (2) and

• Processor: eldoLED BridgeLogic 600 • Reverse polarity protection: yes • Galvanically isolated from DALI

Connections

M4 screws (2)

Dimensions • LxWxH: 68mm x 50mm x 14mm

Network control

2.68” x 1.97” x 0.55”

• Network input: DALI • Network output: USITT DMX512A-

• Power: screw terminals (2)

compatible, based on RS485 specifi-

• DALI IN: screw terminals (2)

cation

• DMX OUT: screw terminals (3)

• DALI network resolution: approximately 5 bit (3% increments)

Dynamic effects • DMX control channels: 0 - 100%

Environmental ratings • Ta range: 0C to 60C (32F to 140F)

• USITT DMX512A network resolution: 8 bit and 16 bit • DALI ballasts used (8-bit): 1...32 • DMX channels used (8-bit): 1...32 • DMX channels used (16-bit): 2...64

• Storage ambient temperature: -40C to 95C (-40F to 203F) • Relative humidity: non-condensing

Ordering information Description

Order nr

DALI-to-DMX Bridge

BDD10101

V1.0 More information, application notes and eldoLED’s terms and conditions are available at www.eldoled.com. © 2009 eldoLED. All rights reserved. eldoLED Europe B.V. eldoLED America, Inc.

Luchthavenweg 18a 1762 Technology Drive # 22

5657 EB Eindhoven San Jose, CA95110

The Netherlands USA

T +31 40 2054050 T +1 408 451 9333

F +31 40 2054058 F +1 408 451 9335

info@eldoled.com info@eldoled.com


Datasheet Analog-to-DMX Bridge

Accessories

Analog Dimmer to DMX Bridge eldoLED bridges

68 mm 2.68''

The analog-to-DMX bridge is part of the series of bridges developed by eldoLED to interface between DMX/LedSync networks and other network protocols.

Analog-to-DMX bridge The analog-to-DMX bridge translates analog dimmer signals into DMX- and LedSync-compatible control signals. The bridge comes in a DMX bridge and 5DMX bridge version. The first one allows you to pass on the converted signal to one DMX universe, the latter one to up to five DMX universes. Analog-to-DMX bridge

The eldoLED analog-to-DMX bridges are ideally suited to retrofit existing analog lighting installations. They allow you to make use of all the advantages offered by the digital LedSync network signals, such as prime signal integrity over long cable lengths.

Features • Plug-and-play solution for LED dimming in existing applications • Screw terminals allowing easy connection of leads • Operating supply voltage range: 12V - 32V DC

Calibrating dimming values The output of the dimmers that are available on the market today varies. eldoLED’s analog-to-DMX bridges have solved this problem: they let you calibrate dimming values, offering you maximum flexibility and the possibility of optimum system integration.

• 0-10V interface

Advantages • Conversion of DC dimmer into USITT DMX512 or LedSync signals • Accurate dimming solution • Easy network setup

5DMX: 0-10V analog input In addition to the dimmer connection, the 5DMX version sup-

• Simplifies total system solution

ports a 0-10V signal. Typically, this type of signal is generated by building automation systems or light controllers and can be used to set the output of all connected LEDs. Standard Dimmer

In Out

In

Out

In

Analog-to-DMX bridge

Example of dimmer wiring schematic © 2009 eldoLED. All rights reserved. For more information, visit www.eldoled.com


Datasheet Analog-to-DMX Bridge Electrical data

Accessories

Mounting data

• Operating supply voltage range: 12V - 32V DC IN

Thermal data

• Mounting orientation: any

• Cooling: passive

• Mounting holes for DMX bridge: for M3

• Processor: eldoLED BridgeLogic 400 • Reverse polarity protection: yes

screws (2) and M4 screws (2) • Mounting holes for 5DMX bridge: for M4 screws (4) and M4.5 screws (2)

Connections DMX bridge

Network control (DMX bridge)

• Power: screw terminals (2) • Data: screw terminals (3)

• Network output: USITT DMX512A-

• Dimmer input: screw terminals (2)

Connections 5DMX bridge • Power: screw terminals (2) • Data: screw terminals (15) • Dimmer input: screw terminals (2)

and LedSync-compatible, based on RS485 specification • Network channels: 512 • Update rate: 22ms • Communication: bi-directional for configuration and temperature read-out

• Analog input: screw terminals (3)

Dynamic effects • Control channel 1-512: 0 - 100%

Environmental ratings • Maximum ambient temperature: 60C (140F) • Minimum ambient temperature:

Dimensions (DMX bridge) • LxW: 68mm x 50mm / 2.68” x 1.97”

Network control (5DMX bridge) • Network output: USITT DMX512Aand LedSync-compatible, based on RS485 specification

Dimensions (5DMX bridge)

• Network channels: 5x 512

• LxW: 94mm x 49mm / 3.7” x 1.93”

• Update rate: 22ms • Communication: bi-directional for configuration and temperature read-out

0C (32F) • Storage ambient temperature: -40C to 95C (-40F to 203F) • Relative humidity: non-condensing

Ordering information Description

Product

Order nr

Analog to 1x512 DMX, parameter controlled

DMX Bridge Pro

BDA10501

0-10V to 5x512 DMX, parameter controlled

5DMX Bridge Pro

BDA50501

V3.0 More information, application notes and eldoLED’s terms and conditions are available at www.eldoled.com. © 2009 eldoLED. All rights reserved. eldoLED Europe B.V. eldoLED America, Inc.

Luchthavenweg 18a 1762 Technology Drive # 22

5657 EB Eindhoven San Jose, CA95110

The Netherlands USA

T +31 40 2054050 T +1 408 451 9333

F +31 40 2054058 F +1 408 451 9335

info@eldoled.com info@eldoled.com


Datasheet DimWheel Colour

Accessories

DMX Compatible Integrated Network Dimmer DimWheel Series The DimWheel is a powerful one-button DMX controller that lets you set dim level, colour and show for LED drivers and DMX compatible luminaires. It is easy-to-install and meets EU, UK and US wall box size requirements. Also, it is compatible with most dimmer face plates available on the market.

DimWheel Colour The DimWheel Colour features the following operation modes: • for general white LED lighting applications, the 1-channel mode lets you dim the light and turn it on or off. • for applications requiring colour temperature control, e.g. mixing warm and cool white light, the DimWheel features a 2-channel mode. In this mode, you can set the colour temperature, dim the light and turn it on or off. • for static and dynamic full colour applications (RGB and RGBW/A), the 3- and 4-channel modes offer complete colour or show control plus dimming and on/off control. Colour control allows you to create any hue and pick a saturation level for this hue. Show control lets you run a show in DMX broadcast or chase mode and set the show speed.

Dimming and colour: high control resolution The DimWheel offers a large dynamic range from 100% down to 0.5%. For most applications, it suffices to have an 8-bit control resolution. In 8-bit DMX mode, DimWheel offers a gamma-corrected dimming curve. The 16-bit resolution guarantees extremely smooth brightness control and fine colour mixing, making the DimWheel the perfect one-button digital LED dimmer.

Shows: broadcast and chase DimWheel Colour offers two types of show modes: broadcast and chase. You can use broadcast mode for mood lighting where all connected luminaires receive the same set point (=colour) and use chase mode for linear dynamic applications. You can define and upload show sequences to the DimWheel Colour yourself by connecting the eldoLED TOOLbox to the DimWheel’s LedSync-in interface and using the freely available TOOLbox PC software.

DimWheel Colour EU/UK (DLC40201) and US version (DLC40301)

Easy installation The DimWheel fits into EU, UK and US industry-standard wall boxes and is compatible with most dimmer faceplates. The DimWheel’s mounting plate ensures easy installation into the wall box, and its push-in connectors and strain reliefs guarantee easy and tidy connection of wires.

Setup is a breeze! The DIP switches, which are accessible after mounting, allow you to set the operation mode, select the show mode (broadcast or chase) and set the network resolution to 8 or 16 bit.

Features • USITT DMX512A compatible • One-button on-off/dimming/colour/show control • Operating supply voltage range: 12V-32V DC • DIP switches for configuration, accessible after mounting • External switch interface allows remote show selection • All settings saved to memory when light is switched off or when a power glitch occurs • Front indicator LED for local show (speed), colour and dim level feedback

Advantages • Complete functionality solution offering LED show sequences, colour, dimming and on/off control • Can be mounted/used like standard household dimmer • Integrated back box and mounting plate simplify total system setup and installation

© 2011 eldoLED. All rights reserved. Third-party brand names mentioned are (registered) trademarks of their respective owners. V3.1 More product documentation and eldoLED’s terms and conditions are available at www.eldoled.com.


Datasheet DimWheel Colour Electrical data

Accessories

Network control

• Supply voltage: 12-32 VDC, SELV equiva-

Dynamic effects

• Network input/output: USITT DMX512A,

lent

• Control channel 1 - 128: 0 - 100%

based on RS485 specification

• Control channel 129 - 256: 0 or 100%

• Maximum power: 2W

• Output signal update rate: 8ms

• Reverse polarity protected

• Number of network channels: 128

• Processor: eldoLED DimLogic 4400 Series

• Network resolution: 8- or 16-bit

Mounting data

• Wall box compatibility: universal EU/UK

• Communication: bi-directional for configura-

DIP switches

tion and uploading of shows

• 1 and 2: set the controller for 1, 2, 3 or 4 channel operation mode

screws. Choice of 8x M3 mounting hole positions.

Operating modes

• On/off

• 3: toggles between show and color mode

• Fixation DLC40301: fasten with two #6

• Dimming: with gamma corrected dimming

(3 and 4 channel mode only)

tapping screws. 2x 4.5mm/0.177” mounting

curve (8-bit resolution)

• 4: sets show mode to broadcast or chase

holes provided.

• Colour selection

• 5: sets DMX network resolution to 8 or 16 bit

Connectors

• V sup: + and - (2)

• Faceplate compatibility: EU: universal face-

• Show: broadcast and chase

plates (Gira, Busch Jaeger, Berker, Jung),

• Show speed selection

UK: BS4662 compatible faceplates, US: standard single gang duplex receptacle

Environmental ratings

• External switch input: + and - (2)

• Ta: -20C ... +60C (-4F... +140F)

• DMX in: +, - and shield (3)

• Ta storage: -40C ... +95C (-40F ...

• LedSync out: +, - and shield (3)

wall plate or coax wall plate (e.g. Cooper, Leviton, Lutron, Pass & Seymour) • Faceplate fixation DLC40201: M10 nut

+203F)

• Faceplate fixation DLC40301: 2x holes for 6/32 UNC threaded screws

• Relative humidity: non-condensing

User interface

and US single gang wall box • Fixation DLC40201: fasten with two M3

• Strain relief: provision for wire straps on

• Encoder type: endless

both sides (wire straps not included)

• Ballistic effect: yes

4.0 mm / 0.16” 10.5 mm / 0.41” 15.8 mm 0.62”

21.8 mm 0.86”

4 mm/0.16”

16.35 mm 0.64”

51.0 mm / 2.00”

22.91 mm 0.90”

69.2 mm / 2.72”

104.7 mm 4.12”

69.2 mm 2.72”

DimWheel Colour US dimensions

DimWheel Colour EU/UK dimensions

(DLC40301)

(DLC40201)

Ordering information Description

Product

Order no.

DimWheel Colour, wall mount DMX controller, fits in standard EU wall box

DimWheel Colour

DLC40201

DimWheel Colour, US version, US wall mount DMX controller, fits in US single gang wall box

DimWheel Colour

DLC40301

DimWheel faceplate kit, colour: white, BS4662 standard wall box faceplate, for use with DLC40201

Faceplate

DLA101W1

For special form factors, connectors or other customized solutions, please contact us at OEMdesk@eldoled.com. Please note that faceplate, wallbox and screws are not included with the DimWheel Colour. eldoLED Europe bv eldoLED America, Inc.

Luchthavenweg 18a 1762 Technology Drive # 226

5657 EB Eindhoven San Jose, CA95110

The Netherlands T +31 40 2054050 USA T +1 408 451 9333

F +31 40 2054058 F +1 408 451 9335

info@eldoled.com nasales@eldoled.com


Leeren Teich 13 33154 Salzkotten Tel. +49 5258 / 93 51 343 Fax +49 5258 / 93 51 682 www.creative-led.com www.will-licht.de

eldoLED Lichtsteuerungen  
Advertisement