Information & Advice
GUIDE TO TECHNICAL INFORMATION
ACTIVE SOLUBLE SALTS
COMPRESSIVE WATER ABSORPTION STRENGTH 2 (%) (N/mm )
TYPICAL PACK WEIGHT kg
Guide to technical data - the details A. B. C. D. E. F.
Product Name Page - listing in brick book Type - Product Type - Stock, Wirecut or Waterstruck Location - Factory location / Collection point Size Tolerance Durability BS EN 771-1
F2 = Suitable for Severe Exposure F1 = Suitable for Moderate Exposure F0 = Suitable for Passive Exposure
G. Active Soluble Salts (BS EN 771-1)
S2 = Within the lowest limits specified S1 = Within limits specified S0 = No requirement, when the intended use provides complete protection against water protection
Maximum or equal to the % figure increase in weight after cold soaking dry bricks in water for 24 hours.
H. Compressive Strength (BS EN 771-1) Minimum mean compressive strength (measure in N/mm2) for samples that are surface ground and tested dry
J. Pack Quantity Number of bricks packaged together to form a pack K. Typical Pack Weight Total weight of a pack of bricks allowing for nominal moisture content
For more detailed or specific technical performance please contact our Design services department at our Head Office (0161 491 8200)
Published on Jan 28, 2014