Page 1

Name : Jerry Baker Title : Press Brake Operator - Gen. Shop Help Target Location : US-CO-Boulder, Denver, Ft, Collins  Authorized in : US YES  Education : High School G.E.D., Some college at Colorado Technical University / Graphic Design  Experience : 20+ Years  Job Type : Full Time  Relocation : Possible  Press Brake Operator 20+ Years Experience  I have worked in the precision sheet metal industry for over 20 years starting out as a general shop helper doing de-burring and grinding and general machine operator jobs. I worked many temporary jobs in that manner for nearly six years up until 1982 or so and then while living in Los Angeles, CA. I worked for an aerospace custom fabrication shop called Fansteel PSM for a year and a half until around 1986 I did bench work and custom grinding and heat treating as well as check and straightening of exhaust thrust flaps for military jets and exhaust ducts for Beech Aircraft and Pratt & Whitney. I have done work on Space Shuttle parts for the main engine separator domes and exhaust cones and some work done on Hubble camera housings (drilling with fixture mainly) and have also some jet engine exhaust case riveting experience (Beech Aircraft) thru Fansteel PSM for Beech Aircraft and Martin Marietta, MacDonald Douglas, Morton Thiokol, Northrop and others.  Since 1989 I have lived in the Colorado Denver-Metro area and have worked primarily in precision sheet metal fabrication shops doing (Amada NC-9 and RG) Press Brake Operator jobs and Gen. Shop Help.  I am experienced in SPC and JIT as well as In-process part inspections.  I also have operated many machines such as (Amada) Punch Press (Operator Only no setup) and am very familiar with hydraulic press brake machines i.e.. Cincinnati, Di Acro and any other press brake machine manual or computer operated.  While in California I also gained experience in Hydro-form machine and have operated a hydoform machine for at least six months. I can operate a sheet metal sheer and have OSHA Classified training with Fork lifts up to 20 tons. I have a few years experience in overhead crane operation up to 50 tons and have worked in classified areas of aerospace precision sheet metal fabrication shops. Government Subcontracting ect..  My primary occupation title is Press Brake Operator and the past seven years I have earned $17.50per hr Home Ph.# - 303-585-1852 Email -

REFERENCES: Reference Name: Mary Davis Reference Company: DSM Manufacturing Co., Inc. Reference Title: Company Owner Phone: 303-722-4611 Reference Name: Albert Cortez Reference Company: Metaltech Industries, Inc. Reference Title: Plant Supervisor Phone: 303-651-1953  Reference Name: Ben Ramey Reference Company: LKR industries  Reference Title: Company Owner Phone: 303-469-0281  Metaltech Industries Inc. 2006 to 2008 20 Bowen St.  Longmont, Co. 80501 303-651-1953  2.5 years LKR industries During  2007 and 2008 Part Time 7180 W. 117th Avenue,Unit E  Broomfield, Co. 80020  303-469-0281  2 years (Part Time)  Midwest Machine Products   2003 to 2005 SOS Staffing Service   50th & Fed. Blvd.   Denver 6255 Joyce Dr.  Golden, Colorado 80403  303-422-5388 Approx. 1.5 Yrs. (SOS Staffing Service)  DSM Mfg. Co., Inc.   1995 to 2002 2065 S Cherokee  Denver, Colorado 80202 303-722-4611  Brake Press Operator 7.5 years  Majestic Metals   1992 to 1995 7770 N. Washington St.  Denver, Colorado  303-288-6855  Brake Press Operator 2.5 years Eagle Manufacturing Inc.  1991 to 1992  Off and on here. 2301 w Cornell Av. Englewood, Colorado (Now under new ownership) Brake Press Operator 1 year Beta Metal Technologies  1990 to 1992 4975 Miller Street  Wheatridge, Colorado

303-431-4445 (Defunct/Closed ) Brake Press Operator 3.5 years Goldberg Bros.  1989 to 1990 8000 E 40th Av.  Denver, Colorado  303-321-1099  Brake Press Operator/Spot Welder (Aluminum) 1.5 years References older than 10 years.  Fansteel PSM (Aerospace) 1983 to 1985 5235 West 104th Street Los Angeles, California (Company relocated since 1986) Class A Bench Mechanic/Prototype 1.7 years Hi Craft Metal Products 1982 to 1983 606 West 184th Street Gardena, California  Hydroform Operator/Circle Shear, Shear Operator 1.5 years Sioux City Foundry 1977 to 1977 801 Division Street  Sioux City, Iowa  712-252-4181  Crane Operator(Stock Warehouse)  1 year 

Current Work Resume  

This is a simple PDF of my current work history and resume. Very Brief and Simple.