Page 1

Aluminium Enclosures with snap-on device

Replacing enclosures in a flash is just a ”click“ away


The requirements from industry for aluminium enclosures:

Installation and replacement ”in a flash“ No need to disassemble the enclosure when exchanging it To protect electronics no need to open the enclosure Gaskets should remain untouched during installation of enclosure

Until now, there have only been fixed solutions:

Replacing conventional enclosures Loosen 4 lid screws and 4 enclosure mounting screws and tighten them again There are 16 screwing procedures

Replacing ROLEC aluCASE enclosures

aluCLIC

Loosen 4 enclosure mounting screws and tighten them again There are 8 screwing procedures

Knud Wexøe A/S • tlf. 4546 5800 • www.wexoe.dk


The solution from ROLEC is aluCLIC, Aluminium Enclosures with snap-on device

The snap-on device is attached to the surface with 4 screws Locate enclosure on the snap-on device and click it into place Lid fixing screws are hidden on the underside of the base Electronics and gaskets in the unopened enclosure remain protected

Now a flexible solution is available from ROLEC

Step 1 The snap-on device, moulded in robust POM plastic, is mounted with 4 screws

Locate the enclosure on the snap-on device Click it into place That‘s it! Replace an enclosure in seconds

Knud Wexøe A/S • tlf. 4546 5800 • www.wexoe.dk

aluCLIC

Step 2


Snap-on device with proven spring loaded latch

A recess on the bottom of the enclosure locates the snap-on device (invisible from the front)

The lid fastening screws are located on the backside of the base - an important design advantage

The whole of the front can be used for mounting keypads, switches, displays etc.

The market demands for enclosures are continuously increasing; excellent quality and high IP ratings are now basic features. Focused on the market developments, we have always presented outstanding solutions. However, we do not just rest. Our “passion for enclosures” drives us on to find ever new ideas. With the new aluCLIC enclosures, we have found a totally new way to fasten enclosures. Industrial plugs, which have been proven a million times, gave us the idea to make enclosures which also can be “plugged in”.

aluCLIC

These can be exchanged in seconds - an invaluable benefit.

Knud Wexøe A/S • tlf. 4546 5800 • www.wexoe.dk


Industrial aluminium enclosures with snap-on device

Sizes:

Advantages: Clicking instead of screwing

ACL 092

90 x 130 x 70 mm

Replacement within seconds

ACL 112

110 x 160 x 70 mm

More space for the electronics

ACL 132

130 x 200 x 70 mm

The complete front of the enclosure can be used The lid is screwed from the bottom

Knud Wexøe A/S • tlf. 4546 5800 • www.wexoe.dk

aluCLIC

Ingress protection IP 67 - IP 69K on request


Technical Data Enclosures Die-cast aluminium: EN AC-44300 DIN EN 1706 (GD Al Si 12/DIN 1725). 1° mould slope for casting ejection ➔ Internal measures diminishing circulatory towards enclosure bottom by 1°. Backside lid-screws Stainless steel 1.4567, captive Snap-on device Plastic POM, colour similar RAL 9005 Integrated recess 1,7 mm recess in the lid for membrane keypads and front panels. Membrane dimensions for standard powder coated enclosures. Ingress protection IP 67 / EN 60529 On request IP 69K / DIN 40050 Gasket TPE gasket, silicone-free temperature range -40°C up to +120°C. Coating Powder coating, light grey RAL 7035 – special colours on request.

ACL 092 ACL 092

130 103 78

46

54 79

90 63

86

103 78 53

70

1

M5 22.5

82

35

56.5 81.5

63 35

aluCLIC

20 96.5 121.5

122

45

51

12.5

Knud Wexøe A/S • tlf. 4546 5800 • www.wexoe.dk

Folie/ Keypad +0 121,5 -0.2 x 81,5 +0 -0.2

5 5.

94 119

Ø

(20)


Industrial aluminium enclosures with snap-on device

ACL 112 ACL 112

160 133 108

66

74 99

110 83

116

Ø 5 5.

(34) 124 149 133 108 85

70 1

51

M5

ACL 132 ACL 132

102

35

76.5 101.5

83 49

34 126.5 151.5

152

45

22.5

12.5

Folie/ Keypad +0 151,5 +0 -0.2 x 101,5 -0.2

200 173 148

86

94 119

130 103

156

Ø

1

192

M5 22.5

122

35

96.5 121.5

103 49

54

70 45

51

12.5

166.5 191.5

Knud Wexøe A/S • tlf. 4546 5800 • www.wexoe.dk

Folie/ Keypad +0 121,5+0 -0.2 x 191,5-0.2

aluCLIC

173 148 125

5 5.

(54)

164 189


Individual adaptation We can carry out cost effective modifications to suit your individual design requirements. We are fully equipped to realise any modifications thanks to our CNC milling machines and modern paint line. We deliver “just in time”.

Drilling Milling Powder coating Lacquering Engraving Silk-screen printing Fitting Assembling Packaging

ROLEC Gehäuse-Systeme GmbH Kreuzbreite 2 31737 Rinteln Fon +49 (0) 57 51 - 4003 - 0 Fax +49 (0) 57 51 - 4003 - 50 info@rolec.de www.rolec.de

http://www.wexoe.dk/fileadmin/produktchefer/dokumentation/ROLEC/aluCLIC_en  

http://www.wexoe.dk/fileadmin/produktchefer/dokumentation/ROLEC/aluCLIC_en.pdf

Read more
Read more
Similar to
Popular now
Just for you