Page 1

Contents

UPS control unit

UPS control unit

UPS control unit

Overview UPS control unit

C.2 C.3

C

C.1


UPS control unit

UPS control unit – Overview

connectPower

When the power supply fails, UPS control units take over the 12/24 V DC power supplies to the installation within seconds, and guarantee plant availability for a defined length of time.

C

Professional signalling guarantees that all relevant signal statuses can be evaluated on the spot. Critical statuses can also be immediately redirected to a higher-level controller.

Switch-mode power supplies, battery control unit and battery providing an uninterrupted power supply.

Power supply 230 V AC

115 V AC 8708680000 CP SNT 250 W 24 V 10 A Input:

\ %

Output: 6-10 A Char. C

The battery module undertakes complete battery management of the connected lead-acid batteries. Constant charging and discharging plus electronic overcurrent protection guarantee an extremely long operational lifetime for the batteries.

L

N

PE

DC OK max. 250 V AC / 1 A 30 V DC / 1 A 14 12 11

•

+V

Status relays (change-over contact)

100 - 120 V AC 200 - 240 VAC 50 / 60 Hz 24 V DC 10 A

+V

-V

Accumulator

Battery control unit

-V

+ PEPS

+

+

-

-

NPS LPS

115/230 V AC 50/60 Hz

L N PE

+ -

Alarm contact

C.2

to the load circuit


UPS control unit

connectPower

UPS control unit

CP-BBU 115-230 V AC / 12 V DC

H

L W

+++ -- NgL BBU- + +-

1

2 Loads

n

C P/S NgL +-

+-

115/230V 50/60Hz

Technical data Input Input voltage Input current Input frequency, max. Input fuse making current limit Surge protection Output Output voltage Output current Mains failure bridge-over time Battery charging current Battery voltage Control at input voltage General data Ambient temperature Storage temperature Status indication

85...265 V AC; 120...300 V DC; typ.115...230 V AC ±10% 0.8 A @ 115 V AC; 0.5 A @ 230 V AC 50/ 60 Hz 2 A time-lag fuse (internal) Thermistor Varistor 12 V DC max. 15 A / max. 9.0 A for power supply 3A 13,65 V 0.2 % -20 °C...+50 °C -20 °C...+85 °C Green LED (full charge): battery voltage > 14.75 Vdc, Yellow LED (low battery): battery voltage < 11 Vdc, Yellow LED (charging): BBU is loading battery, Red LED (error): no AC input voltage, Red LED (reversed battery): battery poles are reversed

Standards EMC standards Approvals

Dimensions Clamping range (nominal / min. / max.) Length x width x height

EN 50178, EN 60950, IEC950 EN 55011, EN 55022, EN 55024, EN 61000-6-2, 3 CSA; Cl. I Div. 2; GOSTME25; CE

mm² mm

Input/Output 4 / 0.1 / 4 161 / 72.5 / 127.5

Note

Ordering data Connection system

Type Screw connection

CP-BBU 115-230VAC / 12VDC

Qty. 1

Order No. 9916280012

Note

Accessories Bracket for wall mounting: 7920560000

C.3


UPS control unit

UPS control unit

connectPower

CP-BBU 115-230 V AC / 24 V DC

H

L W

+++ -- NgL BBU- + +-

1

2 Loads

n

C NgL

P/S +-

+-

115/230V 50/60Hz

Technical data Input Input voltage Input current Input frequency, max. Input fuse making current limit Surge protection Output Output voltage Output current Mains failure bridge-over time Battery charging current Battery voltage Control at input voltage General data Ambient temperature Storage temperature Status indication

85...265 V AC; 120...300 V DC; typ.115...230 V AC ±10% 1 A @ 115 V AC; 0.6 A @ 230 V AC 50/ 60 Hz 2 A time-lag fuse (internal) Thermistor Varistor 24 V DC max. 15 A / max. 9.0 A for power supply 2A 27,3 V 0.2 % -20 °C...+50 °C -20 °C...+85 °C Green LED (full charge): battery voltage > 29.5 V DC, Yellow LED (low battery): battery voltage < 22 V DC, Yellow LED (charging): BBU is loading battery, Red LED (error): no AC input voltage, Red LED (reversed battery): battery poles are reversed, LED red (battery open): no battery is connected

Standards EMC standards Approvals

Dimensions Clamping range (nominal / min. / max.) Length x width x height

EN 50178, EN 60950, IEC950 EN 55011, EN 55022, EN 55024, EN 61000-6-2, 3 CSA; Cl. I Div .2; GOSTME25; CE

mm² mm

Input/Output 4 / 0.1 / 4 161 / 72.5 / 127.5

Note

Ordering data Connection system

Type Screw connection

CP-BBU 115-230VAC / 24VDC

Note

Accessories Bracket for wall mounting: 7920560000

C.4

Qty. 1

Order No. 9916280024

4_5_3_1158070000_CAT4-3_C_EN  

UPS control unit C.3 C Contents UPS control unit UPS control unit C.1 Status r elays (change-over contact) Accumulator Power supply L N PE A...

Read more
Read more
Similar to
Popular now
Just for you