Issuu on Google+

B M X C A T A L O G

2 0 1 2 / 2 0 1 3

C A T A L O G 2 0 1 3

2 / 92

Traffic Distribution Ein Geschäftsbereich der We Make Things GmbH Oskar-Jäger-Straße 127 D-50825 Köln Deutschland Tel.: + 49 221 5000 57-21 (-23) Fax.: + 49 221 5000 57-29 Mail: mail@traffic-distribution.com Web: www.traffic-distribution.com Registergericht: Amtsgericht Köln Handelsregistereintrag: HRB 37204 Ust.Id.Nr: DE222323539 Inhaber: We Make Things GmbH Traffic Distribution importiert und vertreibt – beliefert jedoch nur gewerbetreibende Fahrradläden und keine Endkunden. Falls es keinen Händler in Ihrer Nähe gibt, der Artikel aus dem Traffic Sortiment anbietet, können Sie jeden Fahrradladen in Ihrer Umgebung bitten, mit uns Kontakt aufzunehmen und über diesen Traffic Ware beziehen. Haftungshinweise: Die in diesem Katalog aufgeführten Produktbeschreibungen können abweichen, da sich die angegebenen Firmen eventuelle saisonale Änderungen vorbehalten. Daher garantiert Traffic Distribution nicht für die genannten Spezifikationen. Mehr Informationen und das aktuelle Produktsortiment finden Sie unter: www.traffic-distribution.com Copyright © 2012 We Make Things GmbH. All rights reserved.

C O V E R :

W I L L E M

VAN

GANS EN

|

PH O TO :

F LOR ENT

DELAHAYE

P H O T O :

A N D R E W

W H I T E

C O N T E N T C O M P L E T E S F R A M E S

F O R K S B A R S

0 4 1 8

2 4

2 7

S T E M S

3 2

3

3 8

/

H E A D S E T S

4 3

92

C R A N K S

4 4

G R I P S

S P R O C K E T S B B

S E T S

P E D A L S

4 6 4 9

5 0

C H A I N S

5 4

S E A T S

5 6

S E A T P O S T S B R A K E S R I M S

6 4 6 7

6 9

SPOKES & RIMTAPE W H E E L S E T S

7 2 7 4

HUBS & HUBGUARDS 7 5 T I R E S P E G S

8 0

C L O T H I N G

8 2

8 3

A C C E S S O R I E S 8 4

N A T H A N

W I L L I A M S

F O O T W E A R 8 8

C O

D I C E

1 6 ”

M P L E T E S

4 / 92

Color 1: black | Color 2: matt cyan | Frame: full 1020 hi-ten | Fork: RADIO “ROOKIE” 1020 hi-ten fork, 1pc crmo steerer | Bars: 1020 hi-ten | Grips: RADIO “Junior” grip | Stem: SALT “Junior” top loading stem, 40mm reach Headset: FSA “a-head-set” loose ball | Gyro: yes / full assembled with welded gyro tabs | Lever: RADIO “Junior” alloy brake lever | Brakes: RADIO “AM” alloy u-brake-rear | Cranks: RADIO 1pc crank, S45C heattreated steel, 140mm | BB: us bb, press fit, loose ball | Pedals: SALT “SLIM” nylon/fibreglass pedals | Chain: SALT “AM” chain, 410h type | Sprocket: RADIO “AM” steel 33t sprocket | Driver: 14T Lida freewheel | Front Hub: RADIO “Rookie” steel hub,lb, 3/8”s, 32h | Rear Hub: RADIO “Rookie” steel hub, lb, 14T, 3/8” axle, 32h | Front Rim: SALT “AM” rim, straight single wall, 32h | Rear Rim: SALT “AM” rim, straight single wall, 32h | Seat: RADIO “Junior” combo seat Seat Post: / | Seat Clamp: RADIO slim alloy seatclamp | Tires: RADIO tires “IA21-” 2.1” front / “IA21” 2.1” rear | Pegs: RADIO steel pegs (1 pair) | Weight: 10.6kg (23.36lbs)

C

D I C E

2 0 ”

O M P L E T E S

5 / 92

Color 1: black | Color 2: matt cyan | FRAME: full 1020 hi-ten | FORK: RADIO “ROOKIE” 1020 hi-ten fork, 1pc crmo steerer | BARS: 1020 hi-ten | GRIPS: SALT “Team” grips | STEM: RADIO “AM” front loading stem, 48mm reach HEADSET: FSA “a-head-set” loose ball | GYRO: yes / full assembled with welded gyro tabs | LEVER: RADIO “AM” alloy brake lever | BRAKES: RADIO “AM” alloy u-brake-rear | CRANKS: RADIO 1pc crank, S45C heattreated steel, 165mm | BB: us bb, press fit, loose ball | PEDALS: SALT “SLIM” nylon/fibreglass pedals | CHAIN: SALT “AM” chain, 410h type | SPROCKET: RADIO “AM” steel 33t sprocket | DRIVER: 14T Lida freewheel | FRONT HUB: RADIO “Rookie” steel hub,lb 3/8”s, 36h | REAR HUB: RADIO “Rookie” steel hub, lb, 14T, 14mm axle, 36h | FRONT RIM: SALT “AM” rim, straight single wall, 36h | REAR RIM: SALT “AM” rim, straight single wall, 36h | SEAT: RADIO “Century” combo seat | SEAT POST: / | SEAT CLAMP: RADIO slim alloy seatclamp | TIRES: RADIO tires “IA21-” 2.3” front / “IA21” 2.0 rear | PEGS: RADIO steel pegs (1 pair) | WEIGHT: 12.2kg (26.89lbs)

C O

E V O L

M P L E T E S

6 / 92

Color 1: matt black | Color 2: matt white | Frame: crmo down tube, 1020 hi-ten | Fork: RADIO “ROOKIE” 1020 hi-ten fork, 1pc crmo steerer | Bars: 1020 hi-ten | Grips: ODYSSEY “Chase Hawk” signature grips | Stem: RADIO “AM” front loading stem, 48mm reach | Headset: FSA “a-head-set” loose ball | Gyro: no / holes for removable gyro tabs | Lever: RADIO “AM” alloy brake lever | Brakes: RADIO “AM” alloy u-brake-rear | Cranks: RADIO 1pc crank, full 4130 crmo, 170mm | Bb: us bb , press fit, loose ball | Pedals: SALT “AM” nylon/fibreglass pedals | Chain: SALT “AM” chain, 410h type | Sprocket: RADIO “AM” steel 25t sprocket | Driver: 9T cassette driver, lb | Front Hub: RADIO “Rookie” steel hub,lb 3/8”s, 36h | Rear Hub: RADIO “AM” cassette hub, lb,9t, 14mm axle, 36h | Front Rim: SALT “AM” rim, aero single wall, 36h | Rear Rim: SALT “AM” rim, straight single wall, 36h | Seat: RADIO “BLASTER” mid padded combo seat | Seat post: / | Seat Clamp: RADIO slim alloy seatclamp | Tires: RADIO tires “IA21-” 2.3” front / “IA21” 2.0 rear | Pegs: RADIO steel pegs (1 pair) | Weight: tba w/o pegs

C

S A I K O

O M P L E T E S

7 / 92

Color 1: matt black | Color 2: matt yellow | Frame: crmo down tube, 1020 hi-ten | Fork: RADIO “AM” 1020 hi-ten fork, 1pc crmo steerer | Bars: 1020 hi-ten | Grips: SALT “Team” grips | Stem: RADIO “AM” front loading stem, 50mm reach | Headset: FSA “a-head-set” loose ball | Gyro: no / holes for removable gyro tabs | Lever: SALT “Moto-V2” alloy brake lever | Brakes: SALT “Moto-V2” alloy u-brake-rear | Cranks: RADIO “Rookie” tubular 3pc crank crmo 165mm, 8 spline | Bb: spanish size, press fit, sealed bearing Pedals: SALT “AM” nylon/fibreglass pedals | Chain: SALT “AM” chain, 410h type | Sprocket: RADIO “AM” steel 25t sprocket | Driver: 9T cassette driver, lb | Front Hub: RADIO “Rookie” steel hub,lb 3/8”s, 36h | Rear Hub: RADIO “AM” cassette hub, lb,9t, 14mm axle, 36h | Front Rim: SALT “AM” rim, straight single wall, 36h | Rear Rim: SALT “AM” rim, straight single wall, 36h | Seat: RADIO “Century” combo seat Seat Post: / | Seat Clamp: RADIO slim alloy seatclamp | Tires: SALT tires “Strike” 2.125” front / “Strike” 2.125 rear | Pegs: RADIO steel pegs (1 pair) | Weight: tba w/o pegs

C O M

D A R K O

P L E T E S

8 / 92

Color 1: glossy black | Color 2: glossy white | FRAME: crmo down tube, 1020 hi-ten | FORK: RADIO “AM” 1020 hi-ten fork, 1pc crmo steerer | BARS: 1020 hi-ten | GRIPS: SALT “Team” grips | STEM: SALT “AM” front loading stem, 48mm reach | HEADSET: FSA “a-head-set” loose ball | GYRO: no / holes for removable gyro tabs | LEVER: SALT “Moto-V2” alloy brake lever | BRAKES: SALT “Moto-V2” alloy u-brake-rear | CRANKS: RADIO “AM/PIN” tubular 3pc crank crmo 170mm, 8 spline | BB: mid size, press fit, sealed bearing | PEDALS: SALT “AM” nylon/fibreglass pedals | CHAIN: SALT “AM” chain, 410h type | SPROCKET: RADIO “AM” steel 25t sprocket | DRIVER: 9T cassette driver, lb FRONT HUB: RADIO “AM” alloy hub, loose ball 3/8”s, 36h | REAR HUB: RADIO “AM” cassette hub, lb,9t, 14mm axle, 36h | FRONT RIM: SALT “AM” rim, aero single wall, 36h | REAR RIM: SALT “AM” rim, straight single wall, 36h SEAT: RADIO “Century” thick padded combo seat | SEAT POST: / | SEAT CLAMP: RADIO slim alloy seatclamp | TIRES: SALT tires “Contour” 2.25” front / “Strike” 2.125 rear | PEGS: RADIO steel pegs (1 pair) | WEIGHT: tba w/o pegs

C

V A L A C

O M P L E T E S

9 / 92

Color 1: ash | Color 2: blue | FRAME: toptube & downtube crmo, 1020 hi-ten | FORK: RADIO “AM” 1020 hi-ten fork, 1pc crmo steerer | BARS: full 4130 crmo bar | GRIPS: SALT “Team” grips | STEM: SALT “Pro” top loading stem, 50mm reach | HEADSET: FSA Int. headset, sealed bearing | GYRO: no / holes for removable gyro tabs | LEVER: SALT “Moto-V2” alloy brake lever | BRAKES: SALT “Moto-V2” alloy u-brake-rear | CRANKS: RADIO “AM/BOLT” tubular 3pc crank crmo 170mm, 8 spline | BB: mid size, press fit, sealed bearing | PEDALS: SALTPLUS “FORUM” nylon/fibreglass pedals | CHAIN: SALT “AM” chain, 410h type | SPROCKET: RADIO “Pro” 6061 T6 alloy 25t sprocket DRIVER: 9T cassette driver, lb | FRONT HUB: RADIO “AM” alloy hub, loose ball 3/8”s, 36h | REAR HUB: RADIO “AM” cassette hub, lb,9t, 14mm axle, 36h | FRONT RIM: SALT “AM” rim, aero single wall, 36h | REAR RIM: SALTPLUS “DUNE” rim, straight double wall, 36h | SEAT: RADIO “BLASTER” mid padded combo seat | SEAT POST: / | SEAT CLAMP: integrated slim seat clamp | TIRES: SALT tires “Contour” 2.25” front / “Strike” 2.125 rear | PEGS: RADIO steel pegs (1 pair) | WEIGHT: tba w/o pegs

C O M

A S T R O N

P L E T E S

10 / 92

Color 1: glossy black | Color 2: glossy green | FRAME: 4130 full crmo frame, removable pivots | FORK: RADIO “Pro-V2” full crmo fork, 1pc crmo steerer | BARS: full 4130 crmo bar | GRIPS: ODYSSEY “Matt Beringer” signature grips STEM: SALT “CenterV2” front loading stem, 50mm reach | HEADSET: FSA Int. headset, sealed bearing | GYRO: no / holes for removable gyro tabs | LEVER: SALT “Moto-V2” alloy brake lever | BRAKES: SALT “Moto-V2” alloy u-brakerear | CRANKS: RADIO “ICS” tubular 3pc crank crmo 170mm, ICS System | BB: mid size, press fit, sealed bearing | PEDALS: SALT PLUS “FORUM” nylon/fibreglass pedals | CHAIN: SALT “AM” chain, 410h type | SPROCKET: RADIO “Pro” 6061 T6 alloy 25t sprocket | DRIVER: 9t 1-piece cassette driver, sealed bearing | FRONT HUB: RADIO “Pro” alloy hub, sealed bearing 3/8”s, 36h | REAR HUB: RADIO “Pro” alloy cassette hub, sb,9t, 14mm axle, 36h FRONT RIM: SALTPLUS “SUMMIT” rim, aero double wall, 36h | REAR RIM: SALTPLUS “SUMMIT” rim, straight double wall, 36h | SEAT: RADIO “Century” mid padded pivotal seat | SEAT POST: RADIO pivotal seat post, hi-ten, 160mm SEAT CLAMP: integrated slim seat clamp | TIRES: SALT tires “Pitch Raw” 2.25” front / “Pitch Flow” 2.2” rear | PEGS: RADIO steel pegs (1 pair) | WEIGHT: tba w/o pegs

C

C O M R A D

O M P L E T E S

11 / 92

Color 1: matt black | Color 2: c.p. | FRAME: 4130 full crmo frame, removable brake hardware, heattreated dropouts | FORK: RADIO “Pro-V2” full crmo fork, 1pc crmo steerer | BARS: full 4130 crmo bar | GRIPS: ODYSSEY “Chase Hawk” signature grips | STEM: SALT “CentreV2” front loading stem, 50mm reach | HEADSET: FSA Int. headset, sealed bearing | GYRO: no / holes for removable gyro tabs | LEVER: SALTPLUS “GEO-V2” alloy brake lever | BRAKES: SALTPLUS “GEO” alloy u-brake rear | CRANKS: RADIO “PRO-V2” tubular 3pc crank crmo 175mm, 48 spline | BB: mid size, press fit, sealed bearing | PEDALS: SALTPLUS “FORUM” nylon/fibreglass pedals | CHAIN: SALT “AM” chain, 510h type | SPROCKET: RADIO “Pro” 6061 T6 alloy 25t sprocket | DRIVER: 9t 1-piece cassette driver, sealed bearing | FRONT HUB: RADIO “Pro” alloy hub, sb, 3/8” female bolts, 36h | REAR HUB: RADIO “Pro” alloy cassette hub, sb,9t, 3/8” female bolts, 36h | FRONT RIM: SALTPLUS “SUMMIT” rim, aero double wall, 36h | REAR RIM: SALTPLUS “MESA” rim, straight double wall, welded, 36h | SEAT: RADIO “Century” mid padded pivotal seat | SEAT POST: RADIO pivotal seat post, hi-ten, 160mm | SEAT CLAMP: integrated slim seat clamp | TIRES: SALT tires “Pitch Mid” 2.3” front / “Pitch Flow” 2.2” rear | PEGS: RADIO steel pegs (1 pair) | WEIGHT: tba w/o pegs

C O M

C C - 0 1

P L E T E S

12 / 92

Colorway 1: black | Colorway 2: black/blue | Colorway 3: black/red | Colorway 3: red/black | Colorway 3: blue | Frame: cromo dt | Fork: cromo steerer tube 10mm drop outs | TT: length 20.75” | HT: angle 75° | ST: angle 71° | BB: height 11.8” | CS: length 13.65” | Handle bar: 8.25 X 28 hi-ten | Stem: mind control style fl | Grips: dehart, nylon bar ends | Headset: set integrated | BB: set mid type sealed bearing | Chainwheel: 25t | Crank: 3pc cromo 170mm ht | Pedals: cult nylon | Chain: cult 410 | Saddle: 1 pc - padded w/cult logo | Front hub: 3/8” axle, loose, w/17mm flange nut Rear hub: 14mm, sealed bearing, w/9t sealed driver | Rear brake: u-brake | Brake levers: alloy | Rims: single wall alloy f&r | Tires: dehart f&r | Weight: TBC

C

C C - 0 1

O M P L E T E S

13 / 92

C O M

C C - 0 2

P L E T E S

14 / 92

Colorway 1: black with white wall tires | Colorway 2: black with tan wall tires | Frame: 100% cromo, w/r990 mounts | Fork: 100% cromo, 10mm drop outs | TT length: 21” | HT angle: 75° | ST angle: 71° | BB height: 11.8” CS length: 13.65” | Handle bar: 9 x 30 100% cromo | Stem: salvation style tl | Grips: dehart, nylon bar ends | Headset: integrated | BB set: mid type sealed bearing | Chainwheel: 25t | Crank: 3pc cromo 175mm ht | Pedals: cult nylon | Chain: cult 410 | Saddle: dak pivotal | Front hub: 3/8” female axle, sealed | Rear hub: 14mm, sealed bearing, w/9t | Brake: u-brake | Brake lever: alloy | Rims: single wall alloy front, double wall alloy rear | Tires: dehart f&r Weight: TBC

C

C C - 1 8

O M P L E T E S

15 / 92

Colorway: orange | Frame: 100% 6061 alloy | Fork: cromo steerer, 10mm drop outs | TT length: 18” | HT angle: 74° | ST angle: 70° | BB height: 10.5” | cs length: 12.5” | Handle bar: 8 x 24 hi-ten | Stem: alloy 1 1/8 with cult logo Grips: dehart mini, nylon bar ends | Head set: 1 1/8 | BB set: mid type sealed bearing | Chainwheel: 25t | Crank: 3pc cromo 140mm | Pedals: plastic | Chain: cult 410 | Saddle: 1 pc - w/cult logo | Front hub: 3/8”, loose, w/17mm flange nut | Rear hub: 14mm, sealed bearing, w/9t sealed driver | Brake: u-brake | Brake lever: alloy | Rims: single wall alloy f&r | Tires: kenda 2.20 f&r | Weight: TBC

C O M

C C - 1 6

P L E T E S

16 / 92 Colorway: blue | Frame: 100% 6061 alloy | Fork: hi-ten 10mm drop outs | TT length: 16.5” | HT angle: 74° | ST angle: 70° | BB height: 9.5” | CS length: 11.5” | Handle bar: 8 x 24 hi-ten | Stem: alloy 1 1/8 with cult logo | Grips: dehart mini, nylon bar ends | Head set: 1 1/8 | BB set: mid type sealed bearing | Chainwheel: 25t | Crank: 3pc cromo 127mm | Pedals: plastic | Chain: cult 410 | Saddle: 1 pc - w/cult logo | Front hub: 3/8”, loose, w/17mm flange nut | Rear hub: 14mm, sealed bearing, w/9t sealed driver | Brake: u-brake | Brake lever: alloy | Rims: single wall alloy f&r | Tires: kenda 2.20 f&r | Weight: TBC

C C - 1 2

Colorway: red | Frame: 100% 6061 alloy | Fork: hi-ten 10mm drop outs | TT length: 13.25” | HT angle: 74° | ST angle: 70° | BB height: 6.8” | CS length: 9.25” | Handle bar: 6 x 22 6061 al | Stem: alloy 1 1/8 with cult logo Grips: dehart mini, nylon bar ends | Head set: 1 1/8 | BB set: mid type sealed bearing | Chainwheel: 25t | Crank: 3pc cromo 92mm | Pedals: plastic | Chain: cult 410 | Saddle: 1 pc - w/cult logo | Front hub: 3/8”, loose, w/17mm flange nut | Rear hub: 14mm, sealed bearing, w/9t sealed driver | Brake: caliper-brake | Brake lever: alloy | Rims: single wall alloy f&r | Tires: kenda 2.20 f&r | Weight: TBC

C P H O T O :

R O B

F E R R E T T

O M P L E T E S

17 / 92

A D R I A N

W A R N K E N

F R A

O S

V 3

M E S

18 / 92 Material: 100% Chromoly, Cult OS gussets, S-bend chain stays, tapered TT, and heat treated drop outs, Chromoly blended Cult Classic tubing | Top tube: 20”, 20.5”, 20.75”,21”, 21.25” | Chain stays: 13.55” | Head tube: 75° Seat tube: 71° BB Height: 11.8” | Colors: black, orange, red, blue, black chrome | Weight: 2.14 kg

B - B O Y

V 2

Material: 4130, FBM manufacturing and styling, S-bend chain stays, and heat treated drop outs, Chromoly blended Cult Classic tubing | Top tube: 20.75”, 21” | Chain stays: 13.55” | Head tube: 75° | Seat tube: 71° BB Height: 11.8” | Colors: black, raw | Weight: 2.1 kg

F

B U T T E R

R A M E S

19 / 92 Butter blended chromoly tubing | single bend chain stays with massive tire clearance | investment cast bridge | heat treated dropouts | cult os head tube | cult os bottom bracket | cult os gussets, 8.5” standover | brakeless Top Tube: 20.4”, 20.65”, 20.9”, 21.15” | Chain stay: 13.55” | Head tube: 75° | BB Height: 11.8 | Seat Tube: 71° | Standover: center of BB to top of top tube: 8.95” Colors: black, grey | Weight: 2.29 kg (20.65”)

D E A T H R O W

V 2

Material: 100% Chromoly, Solid manufacturing and styling, single bend chainstays and heat treated drop outs, Chromoly alloy blended Cult Classic tubing | Top tube: 20.75”, 21” | Chain stays: 13.55” | Head tube: 75° Seat tube: 71° | BB height: 11.8” | Colors: black, raw | Weight: 2.1 kg

F R A

C O N J U R E R

M E S

20 / 92 Material: 100% 4130 Chromoly Sanko tube set | Tapered top tube, seat tube & seat stays | Heat Treated Dropouts, Head Tube and BB | 2pc Removable Brake Lugs | Wish Bone Chain Stay Junction | Down tube gusset Off set headtube thickness | Tapered Seat Tube * Min Seat Post Insertion 50.8mm | Integrated Seat clamp | Radius chain/seat stay caps for improved peg clearance Top Tube: 20.8” and 21.2”; 20.8” theoretical size is equal to a 20.6” and 21.2” theoretical size is equal to a 21” | Chain stay: 13.25” slammed with 3/4” of adjustment | Head Tube: 74.5° | BB Height: 11.6 | Seat Tube: 69° Standover: center of BB to top of top tube: 8.68” | Colors: orange, phophate raw, barren black | Weight: 2.22 kg based on a 20.8” frame

R U N E

Material: 100% 4130 Chromoly Sanko tube set | Tapered top tube, seat tube & seat stays | Heat Treated Dropouts, Head Tube and BB | 2pc Removable Brake Lugs | S Bend Chainstays | Elliptical downtube to help prevent denting Top and Down tube gussets | Off set headtube thickness | Tapered Seat Tube * Min Seat Post Insertion 50.8mm | Integrated Seat clamp | Radius chain/seat stay caps for improved peg clearance Top Tube: 20.25”, 20.6”, 21” and 21.25” | Chain stay: 13” slammed with 3/4” of adjustment | Head Tube: 75° | BB Height: 11.6 | Seat Tube: 70° Standover: center of BB to top of top tube: 8.95” | Colors: flame red, barren black | Weight: 2.22 kg based on a 20.6” frame

F

L O D E N

V 3

R A M E S

21 / 92 Top Tube: 20”, 20.75”, 21”, 21.25” | Rear Triangle: 13.2” | Head-tube angle: 74.5° | Seat-tube angle: 71° | BB: mid BB | BB height: 11.8” | Stand over height: 8.5” | Weight: 4.65 lbs (20.75”) | Super strong butted top and down tubes 25.4mm ID seat tube | Fly Style Removable Brakes | Taper Lock dropouts | Clearance for large tires | Dome capped stays | Colors: Matte Black, Matte Red, Matte Raw

B O R A T O

V 3

F R A

D E U C E

D E U C E

V 3

M E S

22 / 92

S I R E N

Tubing: butted, seamless 4130 crmo tubing | Toptube: 20.5” & 21” | Chainstay Length: 13.2” | Angles: HT: 75° | ST: 71° | Bottom Bracket: mid-bb | Width: 68mm | Height: 11.6” cnc machined and heat-treated | Standover height: 8.3” | Headtube: cnc machined and heat-treated, int. h/set | Dropouts: cnc and heat-treated | Specials: full heat treated rear triangle | Colours: black, red, black c.p. | Weight: 2.2kg

F

C R E E P O Z O I D

V 2

R A M E S

Sean Burns signature model made from 4130 Sanko chromoly with a heat-treated integrated headtube drilled for gyro tabs | custom top and downtube gussets with embossed Bone Deth logos | double-butted downtube single-butted seattube with integrated seatpost clamp | externally machined and heat-treated Mid BB shell | tubular stay bridges | seatstay located removable brake mounts | 5mm thick drop outs. Geometry: Top tube: 20.5”,21” | Rear triangle: 13.375” - 13.75” | Head-tube angle: 74.5° | Seat-tube angle: 71° | BB height: 11.8” | Stand over height: 8.9” | Colors: gloss coffin black, chrome-a-toast | Weight: 2.26 kg (20.5”)

C O L T

4 5

23 / 92

Colt Fake signature frame | Material: 4130 Sanko chromoly, double butted top and down tube | Low profile removable brake mounts | Single butted seattube with integrated seatclamp | 14mm dropouts Geometry: Top tube 20.6”, 21” | Rear triangle : 13.6” | Head tube angle : 74.5° | Seat tube angle : 71° | BB height : 11.8” | Stand over height : 8.75” | Colors: matte dead black | Weight : 2.26 kg (20.6”)

D E A D

L E I S U R E

Alex Liiv’s signature model made from 4130 Sanko chromoly | heat-treated integrated headtube drilled for gyro tabs | double-butted downtube | top and downtube gussets with embossed Bone Deth logos | single-butted seattube with integrated seat clamp | externally machined and heat-treated Mid BB shell | custom Liiv seatstay bridge | seatstay located removable brake mounts | 5mm thick drop outs. Geometry: Top tube : 20.6”, 21”, 21.25” | Rear triangle : 13.5”–13.75” | Head tube angle : 75° | Seat tube angle : 71° | BB height : 11.8” | Stand over height : 8”| Colors: matte dead black | Weight : 2.25 kg (20.6”)

F O R

S T R E A M

F O R K

&

T O P

B O L T

K S

24 / 92

Material: full liquid post heat-treated seamless 4130 crmo | Machining: fully cnc’d steerer, spiral & single butted fork

Material: highest quality 7075-T6 alloy topbolt | Size: M24xP2.5 | Colors: black only

blades | fork design now requires no bearing runner on crown | only works with internal headsets

Features: quick thread | Weight: TBC

Steererlength: 170mm | Dropouts: fully invest cast dropout | heat-treated 4130 crmo, 3/8” (10mm) | Offset: 33mm Topbolt: quick thread 7075-T6 alloy | Colors: black, c.p., white, blue | Weight: 936g (32.21oz : 2.01lbs) (incl. topbolt)

F E E D E R

A fork strong enough for the Bone Deth Crew ! 4130 Sanko chromoly fluted, butted, and tapered tubing | 100% heat treatment after welding | 5mm thick dropouts / 3/8” only | laser cut dropouts with 32mm offset | 1pc steer tube with cut lines, recessed threads, and integrated race | 6061 hard anodized alloy top cap | Colors: matte dead black, chrome-a-toast | Anti-rust rust ED coating | Weight: 980 g

F

B L A Z E R

F O R K

&

B L A Z E R

T O P B O LT

O R K S

25 / Material: 4130 Crmo | 4mm drop outs | Tapered butted legs | ED dipped to prevent corrosion | Built-in headset race | 30mm offset | Full 20/20 heat treatment | Custom Aluminum Pre-load bolt | 10mm drop outs slots only Colors: matte black, matte red, chrome | Weight: 795 g

M I N O T A U R

Custom aluminium pre-load topbolt | M 24 6mm allen key | Weight: 21g | Color: black

92

F O R

S E C T

V 2

F O R K

&

T O P

B O L T

K S

26 /

Material: Heat Treated 4130 Chromoly | Externally Butted 1pc Steerer Tube | Integrated Fork Crown Race |

M18*P1.5 forkcap | 7075-T6 aluminium | 6mm allen key | Black only | Weight: 20g

CNC Machined Alloy Top Cap | Super Tapered Legs & Cutouts for peg clearance | 4mm Thick Dropouts 10mm Dropout Slots | Colors: black, red, blue, orange, black chrome

92

W A N D S

V 2

Material: 4130, multi butted tubing and 420 heat treated | Features: Tapered Legs | Butted steerer tube with built in bearing race for campy style internal headsets | Investment cast hollow drop outs 6061 pre-load bolt for 6mm Allen key | Offset: 33mm | Colors: black, chrome, ame red, orange | Weight: 920g

B

A S H L E Y

C H A R L E S

S I G N A T U R E

A R S

27 Features: Ashley Charles signature handlebar | black ed under powdercoating, no-rust primer | Material: full liquid post heat-treated seamless 4130 crmo | Tubing: 7/8” multiple butted | Rise: 8.3”, 8.6”, 8.9” Width: 28.3”, 29”, 29.5” | Backsweep: 10° | Upsweep: 2° | Colors: black, c.p., white, blue Weight: 8.3”: 790 g (27.86 oz : 1.74 lbs) 8.6 “: 803 g (28.32 oz : 1.77 lbs) 8.9”: TBC

G L A M R O I D

V 2

Material: 4130, multi butted tubing and 420 heat treated | Rise: 8.5” | Width: 30” | Backsweep: 12 degrees | Upsweep: 1 degree | Color: barren black, orange, flame red, chrome

/ 92

B A R

T A B A R N A K

D A M N E D

Full post weld heat treatment | 19mm OD cross bar | Multi butted tubing

Oval Crossbar | Full Heat Treated 13 Butted 4130 Sanko Chromoly | 8.5� Rise | 29� Wide | 11.5° backsweep

Black ED dipped to prevent corrosion | Masked off stem clamping section | Rise: 8.75” & 9” | Width: 30”

2.5° upsweep | Black only | Weight: 780g

S

28 /

Sweep: 12° | Upsweep: 1° | Weight: 812 g | Colors: ED black, matte red, chrome

92

B O M B E R

D E A D M A N

Features: The Bone Deth Bomber bars are made from 13-butted chromoly with a 24mm crossbar that’s then

Features: 4pc bars | Sean Burns signature bars | Strong 1.6 mm thick 4130 | straight gauge tubing

heattreated after welding for superior strength and an ED anti-rust coating.

Tapered tubing increases at clamp area for max weld surface | 100% heat treatment after welding

Rise: 8.0”, 8.5”, 9.0” | Width: 28”, 28.5”, 28.75” | Colors: matte dead black, chrome-a-toast

Rise: 8.5”, 9.0” | Width: 28” | Upsweep: 3° | Backsweep: 10° | Colors: matte dead black, chrome-a-toast

Weight: 8.5”: 870 g

Weight: 8.5”: 870 g

V 2

B

L E A D E R

D E A T H

R O W

A R S

29 100% heat treated butted chromoly | 9.0” & 8.5” rise | 28.5” wide | 2° up | 12° back | Colors: black, blue, red,

100% heat treated butted chromoly | 8.65” rise | 29 wide | 2° up | 12° back |

orange, black chrome | Weight: 730 g

Colors: black, chrome | Weight: 750 g

/ 92

W R A I T H

9” Version: Material: full liquid post heat-treatment on 4130 “M2“ crmo | Tubing: 7/8” | Rise: 9” | Width: 29.5” | Backsweep: 11.5° | Upsweep: 1.5° | Weight: 930g 8.5” Version: Material: full liquid post heat-treatment on 4130 “M2“ crmo | Tubing: 7/8” | Rise: 8.5” | Width: 28.5” | Backsweep: 11.5° | Upsweep: 1.5° | Weight: 872g Colours: black, red, black c.p.

30 / 92

K I L I A N

R O T H

P H O T O :

A N D Y

S C H W A R Z K O P F

31 / 92

S T E

H A N N I B A L

M S

Material: 7075-T6 alloy, full cnc machined | Steertube: 1 1/8“ clamp-on | Reach: 50mm | Colors: black, blue, high polished | Features: extremely light and strong front load stem | 6mm micro head hollow bolts cnc side & cap logo | unique offset rear for improved clamping | material saving and unique look | maximum ‘hannibal’ machined design so weight is minimal | Weight: 281g (9.91oz : 0.61lbs)

B U R N S 32 / 92

Material: 7075-T6 alloy, full cnc machined | Steertube: 1 1/8“ clamp-on | Reach: 50mm | Colors: black, blue, high polished | Features: Sean Burns signature stem | very light and strong top load stem 6mm micro head hollow bolts | maximum machined design so weight is minimal | unique offset rear for improved clamping | can be ridden upside down as well | Weight: 273g (9.62oz : 0.60lbs)

B O X E R

Material: 6061-T6 alloy, full cnc machined | Steertube: 1 1/8“ clamp-on | Reach: 48mm | Colors: black, blue, high polished | Features: very light and strong front load stem | 6mm micro head hollow bolts unique offset rear for improved clamping | material saving and unique look | Weight: tba

S

N A T H A N

T E M S

Material: 6061-T6 alloy, full cnc machined | Steertube: 1 1/8“ clamp-on | Reach: 49mm | Colors: black, blue, high polished | Features: extremely light and strong top load stem | 6mm micro head hollow bolts laser side & cap logo | unique offset rear for improved clamping | material saving and unique look | counter sink cap for a cleaner look | Weight: TBC

M I N D

C O N T R O L 33 / 92

Front Load Stem | Material: 6061 aluminum | hollow bolts | Reach: 52mm | Colors: black, polished, orange, red and rasta | Weight: 269 g

S A L V A T I O N

Top Load Stem | Material: 6061 aluminum | hollow bolts | Reach: 52 mm | Colors: black, polished, orange, red, blue and rasta | Weight: 286 g

S T E

L I F T E D

F O N T L O A D

M S

Material: 6061 aluminium alloy | Mutiny logo machined in the handle bar clamp and laser etched graphics | Designed to give a positive rise but still a front loader | Sizes: 48mm, 51mm or 53mm | Colors: black, chrome, red Weight: 280 g

L I F T E D

T O P L O A D

34 / 92

Material: 6061 aluminium alloy | Features: Internal and minimal external machining for increased weight saving | 23mm rise to help the rider create a taller front end | Other key features are hollow bolts, rounded knee friendly backside, recessed for fork pre-load bolt to achieve ush look | Mutiny logo machined in the handle bar clamp and laser etched graphics | Reach: 48mm, 51mm and 53mm | Stack Height: 33mm | Rise (Upright): 23mm Colors: black, chrome, red | Weight: 260 g

C R Y S T A L

T O P L O A D

Material: 6061-T6 alloy, full cnc machined | Steertube: 1 1/8“ threadless clamp-on | Reach: 49mm Specials: very light and strong frontload stem cnc underside channel for reduced weight without rotor plate | Colors: orange, c.p., black | Weight: 320g

S

C R Y S TA L F R O N T L O A D

D E A T H

H A N D

T E M S

Material: 6061-T6 alloy, full cnc machined | Steertube: 1 1/8“ threadless clamp-on | Reach: 49mm

Material: 6061-T6 Aluminium | Reach: 50mm | Colors: Black | Weight: 285g

Specials: very light and strong frontload stem | circular center bore hole | without rotor plate | Colors: orange, c.p., black | Weight: 293g

T O P

S H E L F

C E L L 35 / 92

Material: CNC machined from 6061 aluminum | Reach: 48mm | Relieved to reduce weight

Material: CNC machined from 6061 aluminum | Reach: 50.5mm | Relieved to reduce weight

True topload style | Colors: matte black, polished, matte red | Weight: 250 g

Clean minimal design | Colors: matte black, chrome, matte red | Weight: 258 g

T O P

S T E M

N O T C H

Material: CNC machined from 6061 aluminum | Reach: 49mm | Relieved to reduce weight Colors: matte black, chrome, matte red | Weight: 246 g

B O L T S

M8 x 1.25� x 25mm | 6 bolt set | steel | Colors: black, blue, green, purple, red

36 / 92

P H O T O :

A N D R E W

W H I T E

37 / 92

S E A N

B U R N S

G R I

T E A M

A S H L E Y

Material: soft kraton rubber | Hardness: 30° | Size: 147mm x 29mm | Features: incl. éclat nylon corkx

Material: soft kraton rubber | Hardness: 25° | Size: 151mm x 27.5mm | Features: incl. éclat nylon corkx

barends | éclat logo integrated into a modern, great feeling grip | multi-directional raised contact points

barends | designed in conjunction with Ashley Charles | simple non-slip jag pattern | thicker curved flange |

increase wear life | Colors: black, white, blue, gum | Weight: 105 g (per pair without barends)

Colors: black, white, blue, gum | Weight: 82 g (per pair without barends)

B U R N S

CHESTER BLACKSMITH

Material: soft kraton rubber | Hardness: 30° Size: 155mm x 29mm | Features: incl. éclat nylon corkx barends

Material: soft kraton rubber | Hardness: 25° | Size: 155mm x 29mm | Features: incl. éclat nylon corkx

| designed in conjunction with Sean Burns | non-parallel shape designed for hand comfort | subtle contact

barends | designed in conjunction with Chester blacksmith | non-parallel shape designed for hand comfort

areas for control | flange removal marking | Colors: black, white, blue, gum

subtle contact areas for control | flange removal marking | Colors: black, white, blue, gum

Weight: 100 g (per pair without barend)

Weight: 100 g (per pair without barends)

P S

38 / 92

Z A P

Features: incl. éclat nylon corkx barends | super long grip designed to be cut to desired length option to run with normal or low flange Material: soft kraton rubber | Hardness: 30° | Size: 190mm x 30mm | Colors: black,white, blue, gum | Weight: 165g(with barends) 145g (without barends)

G

S C O P E

M O O N

R I P S

Material: soft kraton rubber | Hardness: 30° | Size: 150mm | Features: incl. éclat nylon corkx barends

Features: incl. matching nylon barends | designed in conjunction with shane Weston flangeless design

designed in conjunction with ODI USA non-parallel shape designed for hand comfort subtle contact areas for

Material: soft kraton rubber | Hardness: 25° | Size: 150mm x 28.2mm

control | flange removal marking | Colors: black | Weight: 100 g (per pair without barends)

Colors: black, white, blue, gum | Weight: 120g (3.85oz : 0.26lbs) (per pair without barends)

X DEFGRIP

HOUNDSTOOTH

39 / 92

MacNeil X Defgrip collaboration | Material: Soft Krayton rubber | Flangeless | Durable nylon barends

Material: Soft krayton rubber | Durable nylon barends

5 color choices | Classic mushroom design for comfort | Colors: black, blue, red, clear, orange

Colors: black, purple, white, blue, red

T R A V E L E R

ZOOMER

Material: Soft krayton rubber | Durable nylon barends | Ultra thin profile

Material: Soft krayton rubber | Durable nylon barends | Horizontally ribs for unique feel

Colors: black, white, green and red

Colors: purple, orange, red, green, white, and black

G R I

I N D I A N

T E A M

Randy Taylor Signature Grip | Material: Soft Krayton Rubber 30 durometer | Length: 150mm

Material: Soft Krayton Rubber | Supplied with new nylon bar end

Colors: black, khaki | Weight: 99g a pair

Colors: black, khaki | Weight: 99 g

P S

40

DIAMOND

/ 92

Material: Soft gum compound | Without ange | 150mm length | 29mm diameter | Supplied with our new Nylon bar end | Colors: black, orange

TEAM NO FLANGE

DEHART

Made in the USA by ODI | Krayton rubber with plastic grip ends | Flangeless design allows to be run either way

When you are particular about your grips, you should have your own. Dehart does.

Colors: black, khaki, orange | Weight: 89 g

Colors: black, orange, white, gum, red, blue, rasta

G

W A F F L E

R I P S

Made in the USA by ODI | Features: Vans iconic wafe sole pattern | Colors: black, orange, white, gum, red, blue

F A I T H

D A K

41 / 92

Made in the USA by ODI | Material: Krayton rubber with plastic grip ends

Dakota Roche signature grip | odi rubber compound | Colors: black, orange, white, gum, blue

Flangeless design allows to be run either way | Colors: black, orange, white, gum, red, blue

BURNING RUBBER

C O R K X

Chris Crawford signature grip | Small circumference / 145mm length | 30 durometer

Material: full nylon | Features Features: unique over-tube cap design, split ribs for easier fitting

Bone Deth nylon bar ends included | Colors: black, black/slime green marble, gum

Colors: black, white, blue, gum | Weight: 17 g

42

/

92

T O B I

F R E I G A N G

P H O T O :

M A R V I N

L E B E K

H

D U A L

E A D S E T S

7075-T6 alloy cnc machined, high-end sealed bearings | Features: supplied with two exclusive top caps (low or high design) & two 3mm spacers, variable stack heights between 7-20mm possible Colors: black, blue, high polished | Weight: 79 g (includes everything)

I N T E G R A T E D

H E A D S E T

Integrated 1 1/8” Headset | Alloy top cap with laser etched MacNeil logos | Aluminum compression wedge and lower bearing race | Campy compatible 45º x 45º, 41.8mm OD bearings | Colors: black, polished, red | Weight: 60 g

V2 INTEGRATED

Campy spec, includes 2mm and 5mm spacer washers. Colors: black | Weight: 60 g

43 / 92

C R A

O N Y X

N K S

44 / 92 Material: tubular heat-treated 4130 crmo arms & crmo axle | Length: 170mm or 175mm | Axle: 22mm crmo ultra hollow | Features: strong, lightweight crank | RSD & LSD compatible | redesigned crmo crank bolt | investment cast pedal & spindle boss | Other: comes supplied with assembly tool and 6mm allen key | Colors: black, c.p., white, blue | Weight: complete: 883g

T I B I A

Material: tubular heat-treated 4130 crmo arms & crmo axle | Length: 170mm or 175mm | Axle: 22mm crmo ultra hollow | Features: | strong, lightweight crank | RSD & LSD compatible | 2 sprocket bolt holes on each side | redesigned crmo crank bolt | Other: comes supplied with assembly tool and 6mm allen key | Colors: black, c.p., white, blue | Weight: complete: 934 g

C

C O N J O I N E D

C O N S P L I N E D

R A N K S

45 / 92 Material: Sanko japanese tapered tubing | Full post weld heat treatment | Proven 175mm, 48 spline, 19mm

Full post weld heat treatment | Proven 48 spline 19mm hollow spindle | Size: 175mm | RHD

chromo Gun drilled hollow OD spindle | Size: 175mm with 140mm wide spindle | Colors: matte black, chrome

140mm wide spindle | Colors: matte black, chrome | Weight: 870 g for arms and spindle

Weight: 875 g for arms and spindle (175mm)

O S

FLUSHMOUNT KIT

wrap around gusset design | 3-pc tubular design with heat-treated swaged chromoly arms

Flushmount bolts kit | fits for most 19mm crank spindles | Colors: blue, green, purple, red

1-pc spindle/sprocket boss | 19mm hollow chromoly spindle with 48 splines single ush mount hollow spindle bolt | rhd/lhd compatible Colors: black, chrome, black chrome

S P R

S Y L A R

O C K E T S

46 / 92 Material: 7075-T6 alloy, full cnc, hard anodized finish | Size: 25t, 26t, 27t or 28t | Thickness: 6.35mm | Axlebore: 23.8mm | Features: using 7075-T6 plus hard anodized finish makes the sprocket stronger | supplied with adapters for 19mm & 22mm | sinked adapter for better chain alignment | Colors: black, high polished, blue | Weight: 70 g: 25T

V E N T

Material: 6061-T6 alloy, full cnc, hard anodized finish | Size: 25t, 26t, 27t or 28t | Thickness: 8mm | Axlebore: 23.8mm | Features: using 6061-T6 plus hard anodized finish makes the sprocket stronger supplied with adapters for 19mm & 22mm | sinked adapter for better chain alignment | Unique hollow cnc cut for reduced weight | Colors: black, high polished, blue | Weight: 62g (25t)

S

M E M B E R

P R O C K E T S

47 / 92 Material: 7075 Aluminum, CNC machined, 25t, 28t, 30t, 5 bolt holes, Teeth in the center of the sprocket for better chain alignment. | Colors: black, polished, orange, red, blue and rasta | Weight: 67 g : 25 T

O S

Material: 7075 aluminium, 25t, 28t, 30t bolt holes Taking inspiration from a car rim, the OS sprocket has a unique look, 6 mm thick | Colors: black, polished, orange, red, blue and rasta | Weight: 66 g: 25T

S P R

L I G H T

V 3

S P E E D F R E A K

O C K E T S

48 / 92

Material: CNC machined 7075-T6 aluminum | Offset 1/8” teeth aid in chain alignment. 15/16” bore with 19mm chainwheel | Teeth: 25T, 28T, 30T | Size: 1/8” | Bore: 15/16” | Thickness: 6mm | Adapter: 19mm Included Colors: coffin black, pauly-ished shore sheen polished | Weight: 73 g : 25T

E T H E R E A L

Material: 7075 alloy | Features: 15/16” bore with adaptor for 19mm axle | Sizes: 25t, 27t, 28t | Colors: black, chrome, red | Weight: 78 g: 25 T

B

M I D

B B

S P A N I S H

B B

P H O T O :

T H O M A S

G O L D S M I T H

B S E T S

Material: alloy centre spacer and cnc caps machined alloy cap / spacer with etched éclat detailing

Material: alloy centre spacer and cnc caps machined alloy cap / spacer with etched éclat detailing | Size:

Size: mid-bb for 19mm or 22mm | Features: quality sealed bearings | supplied with 2 cone spacers, centre

spanish-bb for 19mm or 22mm | Features: quality sealed bearings | supplied with 2 cone spacers, centre

spacer | (44mm), 6x alloy washers | Colors: black, high polished, blue | Weight: to fit 19mm spindle: 189 g, to

spacer | (48mm), 6x alloy washers | Colors: black, high polished, blue | Weight: to fit 19mm spindle: 137g

fit 22mm spindle: 174 g

to fit 22mm spindle: 129 g

O S

M I D

B B 49 / 92

Size: mid-bb for 19mm or 22mm | Features: Centre spacer with Cult logo |Different alloy spacer included

Size: mid-bb for 19mm or 22mm | Colors: black

Sealed bearing | Colors: black | Weight: 190g with spacer

K E V I N

K I R A L Y

PHOTO: CARLOS FERNÁNDEZ LASER

P E D

P L A Z A

N Y L O N

A L S

Material: injection molded nylon / fibreglass Size: 9/16” | Bearings: loose ball | Features: knurled top surface | crmo spindle | slim lightweight design | logo surface detailing | Colors: black, white, blue | Weight: 419 g (per pair)

50

S U R G E

N Y L O N

/ 92

Material: injection molded nylon / fibreglass Size: 9/16” | Bearings: loose ball | Features: knurled top surface | crmo spindle | slim lightweight design | logo surface detailing | Colors: black, white, blue | Weight: 419 g ( per pair)

S U R G E

A L L O Y

Material: 6066-T6 alloy cnc body, crmo axle Size: 9/16” | Bearings: sealed bearing with bushing system & nylon impact ring | Features: replacable pins | extremely strong pedal body and bearing | crmo spindle | extra pack replaceable pins & nylon impact ring | Colors: black, high polished, blue, white | Weight: 423 g (per pair)

P

S L A S H

N Y L O N

E D A L S

Material: injection molded nylon / fibreglass Size: 9/16� | Bearings: loose ball | Features: | knurled top surface | crmo spindle | slim lightweight design | Colors: black, white, blue | Weight: 389 g (per pair)

S L A S H

A L L O Y

51 / 92

Material: cast alloy body, crmo spindle Size: 9/16� | Bearings: loose ball | Features: replacable pins | replaceable crmo spindle | slim lightweight design | Colors: black, high polished, blue, white | Weight: 423 g (per pair)

C I N C H

Features: Removable traction pins | Looseball bearings | Cast aluminum body | Colors: matte black | Weight: 216 g each

P E D

N Y L I S T

N Y L O N

A L S

52 / 92

glass impregnated | Molded pins | Laser etched logos | Unsealed only | Colors: black, red | Weight: 186g wveach or 372g per pair

N Y L O N

Spindle Size: 9/16� | Bearings: loose ball | Features: Cult logo in the middle from the pedal | Colors: black, orange, red, white, blue | Weight: 450 g (per pair)

P H O T O :

C H R I S T O P H

S P R A N G E R

C H R I S T O P H

W E R N E R

P E D A L S

53 / 73 92

C H A

D I E S E L

I N S

54 / 92 Material: steel, cromized treatement | Size: 1/2” x 1/8” | Features: lightweight design | very strong pins & plates | comes with extra half-link assembled | 100 links | Colors: black, raw | Weight: 382g

S T R O K E

Material: steel, cromized treatement | Size: 1/2” x 1/8” | Features: lightweight half link design | very strong pins & plates | Colors: black, raw | Weight: 382g

C

4 1 0

H A I N S

The Cult 410 chain is a strong and affordable 1/8” chain based on the original 410 with stamped cult logos and a teflon coating. includes a pre-installed half link to make fine tuning the length easier. Width: 1/8” | Features: 100 links | Colors: black, raw, chrome | Weight: 328g

5 1 0

55 / 92

The Cult half link chain features a teflon coating with engraved Cult logos and is designed to help dial in the rear end length on frames with short drop outs, rounded side plates are compatible with 8T and larger drivers Width: 1/8” | Total links: 100 | Colors: black, raw chrome | Weight: 320 g

H A L F L I N K

The Cult half link chain features a teflon coating with engraved Cult logos and is designed to help dial in the rear end length on frames with short drop outs | rounded side plates are compatible with 8T and larger drivers Width: 1/8” | Total links: 100 | Colors: black, raw, chrome, rasta

S E A

T O C C O

T S

56 / 92 Material: 100% poly propylen, kevlar or vinyl topcover | pivotal system | Features: new developed shape and base construction designed by éclat | fat padding | Colors: black | Weight: 343g

C O M P L E X

Material: 100% nylon / with inner 6061-T6 alloy center post, kevlar or vinyl topcover | Size: 25.4mm seat post | Features: patented design for éclat | seat combo designed for riders running low seats | unique seat support structure concept | slick embossed éclat design | Colors: black, denim, blue, leather brown | Weight: slim padded: 238 g

S

U N I F Y

E A T S

57 / 92 Material: 100% nylon / with inner 6061 T6 alloy center post, kevlar or vinyl topcover | Size: 25.4mm seat post | Features: patented design for éclat | seat combo designed for riders running low seats | unique seat support structure concept | slick embossed éclat design | overall larger seatbase shape | Colors: black, denim, blue, leather brown | Weight: slim padded: 247 g | fat padded: tba

G O N Z O

Material: 100% nylon, kevlar or vinyl topcover | pivotal system | Features: | eclat’s shape and base construction | designed by éclat | Colors: black, denim, blue, leather brown | Weight: slim padded: 247 g | fat padded: 260 g

S E A

O Z

T S

58 / 92 Material: 100% poly propylen, kevlar or vinyl topcover | pivotal system | Features: new developed shape and base construction | designed by ĂŠclat | Colors: black, denim, blue, leather brown Weight: slim padded: 301g | fat padded: 332 g

C A P I T A L

&

F A T

Patented Pivotal Technology | Colors: black | Weight: 297 g (mid padded), 300 g (fat padded)

C A P I T A L

S

D A K

E A T S

59 / 92 Material: Kevlar with embroideded cult logo | Pivotal system | Colors: black with black, rasta, white, blue, orange or red stitching | Weight: 285 g

D E H A R T

Material: Kevlar with embroideded cult logo | Pivotal system | Colors: black with black, rasta, white, blue, orange or red stitching | Weight: 232 g

60 / 92

W I L L E M

V A N

G A N S E N

61 / 92

P H O T O :

T om

J onckheere

S E A

C L A S S I C

T S

62 / 92 Material: Synthetic leather with foam padding | Features: Slim or mid version, Custom Mutiny impression | Hollow pivotal bolt | Colors: brown | Weight: 328 g

P A T C H

Material: kevlar upper with foam padding | Features: Slim or mid version, Custom Patch | Hollow pivotal bolt | Colors: black | Weight: 328 g

S

V I B R A T O R

L E O P A R D

E A T S

63 / 92 Pivotal seat with hollow bolt | slim and mid-version available | Custom Bonedeth access patch | Colors: Leopard | Weight: 323 g (mid padded)

V I B R A T O R

S P I D E R

Pivotal seat with hollow bolt | slim and mid-version available | Custom Bonedeth access patch | Colors: black with spider web stitching | Weight: 249 g (slim padded)

S E A

T O R C H

T P O S T S

64 /

Material: 6061-T6 3D forged alloy | Size: 25.4mm | Length: 75mm (short), 135mm (mid) , 230mm (long) | Features: pivotal system compatible seat post | star shape wall structure for added strength | cnc finish, ĂŠclat exclusive design | Colors: black, high polished, blue | Weight: tba

92

T O R C H

1 5

Material: 6061-T6 3D forged alloy | Size: 25.4mm | Length: 75mm (short), 135mm (mid) , 230mm (long) | Features: pivotal system compatible seat post | 15mm offset bolt position (lay back seat post) | star shape wall structure for added strength | cnc finish, ĂŠclat exclusive design | Colors: black, high polished, blue | Weight: tba

S

COUNTER

M T B M X

E A T P O S T S

65 / 92

Material: 6061 alloy | Diameter: 25.4mm | Length:130mm | Cult box logo | Colors: black | Weight: 99 g

Material: 6061 Aluminum | 3D forged construction | Length: 330mm | Color: matte black Sizes/Weight: 27.2 (202g)

S T U M P

Length: 130mm | Sizes: 25.4mm OD and 22.2mm OD | Colors: matte black, matte red, polished | Weight: 25.4 mm OD (99g) and 22.2 mm OD (81g)

S E A

N U B

T P O S T S

66 / 92 Run ONLY with frames with no seat mast | Simple – just tighten down the Pivotal seat bolt | Low seat position | Super clean look | Color: matte black | Weight: 54 g

P O S T

M A N

Material: 6061 alloy | Length: 135mm | Pivotal Seatpost | Colors: black | Weight: 99 g

B

U N I T

U - B R A K E

R A K E S

Material: cold forged 6066-T6 alloy | Features: comes with new éclat ”Force” female bolt type brakepads | comes with unique cnc’d cable hanger and éclat straddle cable | sleek low-profile design & forged alloy resists flex Colors: black, blue, high polished | Weight: complete: 171 g

67 /

FORCE BRAKE PAD

UNIT BRAKE PAD

Material: soft rubber compound with a forged 6061-T6 alloy internal structure | Features: available as regular

Material: soft rubber compound with a forged 6061-T6 alloy internal structure | Features: comes with all

bolt or female bolt brake pad version | comes with all required hardware (bolts, etc) | imprinted logo on the

required hardware (bolts, washers etc.) | imprinted logo on the braking surface | mid-length pad size

braking surface, Length: 60mm | Colors: black, white, clear/black, clear/orange, clear/midnight teal

Colors: black, white, clear/black, clear/orange, clear/midnight teal | Weight: 54 g (per pair)

Weight: 41 g (per pair)

CABLE HOLDER

CORE LINEAR

Colors: black, yellow, green, red

Material: cable: 1.5mm slic, stainless, pre-stretched, teflon coated inner wire housing: 5mm compressionless, teflon lining, linear strands | Length: 130cm (cablehousing) | Features: reinforcing spiral alloy shell 2pcs ferrule (loose) and 2pcs end nipple are included | Colors: black, blue, clear, white | Weight: 78 g

92

B R A

S N I P E R

K E S

68 / 92

Material: 6066-T6 alloy | Features: left or right version available | unique clasp design, very strong hinge construction | perfect shaped lever geometry | improved knuckle space Colors: black, black/blue, black/high polished | Weight: 94 g

S N I P E R

1 - F I N G E R

Material: 6066-T6 alloy | Features: left or right version available | unique clasp design, very strong hinge construction | perfect shaped lever geometry for index finger action | improved knuckle space Colors: black, black/blue, black/high polished | Weight: 95g

R

T R I P P I N

I M S

Material: 6066-T6 alloy, pin joint (3 pins) | Size: 36h only | Features: tripple pin joint | straight or aero version | Colors: black, high polished, blue | Weight anodized: 471 g | c.p: 500 g

69 /

X - O D U S

Material: 6066-T6 alloy, ash welded | Size: 36h only | Features: drilled for cross lacing | Colors: black, high polished, blue | Weight: anodized: 511 g | c.p: 543 g

92

R I M

P O L A R

S

70 / 92

Material: 6066-T6 alloy, welded | Size: 36h only | Features:: high profile rim, double wall construction | straight or aero sidewalls available Colors: black, high polished, blue | Weight: 423g (aero), 445g (straight)

B O N D I

Material: 6066-T6 alloy, ash welded | Size: 36h | Features: unique wider design with double cavity | straight or aero sidewalls available | Colors: black, high polished, blue | Weight: anodized: 538 g | c.p: 564 g

R

J A W

I M S

71 / 92

Material: 6011V-T6 alloy, flash welded | Size: 36h only | Features: wide profile rim, double wall construction angled sidewalls with access holes to replace broken spokes | Colors: black, high polished, blue | Weight: 453g

M A T C H

Material: 6061-T6 alloy, welded | Size: 36h only | Features: internal “truss” beam double-wall construction with offset spoke holes | welded seam for superior strength and durability Colors: black, chrome, blue, red, orange | Weight: 530 g

R I M

D U B

S – S P O K E S

72 / 92

Material: 6061 T6 material | 36 hole | Double wall construction | Colors: matte black | Weight: 446 g

SPOKES

éclat “DB Stainless” steel spokes (double butted): Material: 14g stainless steel spokes, thinner 15g center area for lightness | Length: 182mm, 184mm, 186mm or 192mm Colors: black, c.p. Features: 50 pcs | lightweight | incl. 16mm black brass nipples | Weight: 262 g (50 pcs incl. nipples) (length: 184mm) éclat “Stainless” steel spokes: Material: 14 g stainless steel spokes Length: 182mm, 184mm, 186mm or 192mm | Colors: black, c.p. | Features: 50 pcs | incl. nipples | Weight: 298 g (50 pcs incl. nipples) (length: 184mm)

R

RIMTAPE

I M T A P E S

éclat “DB Stainless” steel spokes (double butted): Material: 14g stainless steel spokes, thinner 15g center area for lightness | Length: 182mm, 184mm, 186mm or 192mm Colors: black, c.p. Features: 50 pcs | lightweight | incl. 16mm black brass nipples | Weight: 262 g (50 pcs incl. nipples) (length: 184mm) éclat “Stainless” steel spokes: Material: 14 g stainless steel spokes Length: 182mm, 184mm, 186mm or 192mm | Colors: black, c.p. | Features: 50 pcs | incl. nipples | Weight: 298 g (50 pcs incl. nipples) (length: 184mm)

STACK LOGO RIMTAPE

73 / 92

Rimtape with Cult Stack Logo | Pair | Color: white/black

RIMTAPE

VA LV E S T E M C O V E R

Macneil rimtape | packaged as a pair | Colours: black

High quality and good looking valve stem covers | Colours: black, blue, purple, green, red

W H E

POLAR FRONT & REAR

BONDI FRONT & REAR

E L S E T S

74 / 92 Frontwheel: Rim: “Polar” | Hub: “Pulse” | Colors: all black | Features: stainless steel spokes, black nipples

Frontwheel: Rim: “Bondi Aero” | Hub: “Pulse” | Colors: all black | Features: stainless steel spokes, black nipples

rimtape included | Weight: 922g

rimtape included | Weight: 1004g

Rearwheel: Rim: “Polar” | Hub: “Pulse” (male axle version) | Colors: all black | Features: stainless steel spokes,

Rearwheel: Rim: “Bondi Straight” | Hub: “Pulse” (14 mm axle version) | Colors: all black | Features: stainless steel

black nipples | rimtape included | Weight: 1143g

spokes, black nipples | rimtape included | Weight: 1189g

TRIPPIN FRONT & REAR

MATCH FRONT & REAR

Frontwheel: Rim: “Trippin Aero” | Hub: “Pulse” | Colors: all black | Features: stainless steel spokes, black nipples

Frontwheel: Rim: “Match” | Hub: “Match Front” (Female axle version) | Rim colors: black, chrome, orange, red,

rimtape included | Weight: 917g

blue Features: Cult Stack Logo rimtape included | Weight: 1020 g

Rearwheel: Rim: “Trippin Straight” | Hub: “Pulse” (14mm axle version) | Colors: all black | Features: stainless steel

Rearwheel: Rim: “Match” | Hub: “Match Rear” (14 mm axle version) | Rim colors: black, chrome, orange, red, blue

spokes, black nipples | rimtape included | Weight: 1185g

Features: LHD or RHD | Cult Stack Logo rimtape included | Weight: 1340 g

H U

S I M P L E X

B S – H U B G U A R D S

Material: 6061-T6 alloy refined hub-shell | Axle: 3/8” (10mm) heat-treated crmo axle | Bearings: 2 sealed high quality japanese bearings | Spokes: 36h | Features: alloy cnc cones Colors: bblack, high polished, blue | Weight: 220 g

P U L S E

|

P U L S E

H U B

G U A R D

75 / 92

Material: 6061-T6 alloy refined hub-shell | Axle: 4130 crmo female axle. 3/8” thread | Bearings: 2 sealed high

Material: 7075-T6 alloy | Features: exclusively designed for the éclat pulse front hub threadless, slides

quality japanese bearings | Spokes: 36h | Features: lightweight design, strong low flange hub | allen key inner

smoothly onto axle | Colors: black, high polished, blue | Weight: 44 g

axle for easy maintenance | Colors: black, high polished, blue | Weight: 271 g

T E C K

|

T E C K

H U B

G U A R D

Material: 6061-T6 alloy refined hub-shell | Axle: 7075 heli-coiled female axle, 3/8” thread | Bearings: 2

Material: 7075-T6 alloy | Features: exclusively designed for the éclat teck front hub threadless, slides

sealed high quality japanese bearings | Spokes: 36h | Features: allen key inner axle for easy maintenance

smoothly onto axle | Colors: black, high polished, blue | Weight: 57g

Colors: black, high polished, blue | Weight: 276g

H U B

D Y N A M I C

|

D Y N A M I C

H U B

G U A R D

S – H U B G U A R D S

76 / 92 Material: 6061-T6 alloy refined hub-shell | Axle: 7075 heli-coiled female axle, 3/8” thread | Bearings: 2

Material: 7075-T6 alloy | Features: exclusively designed for the éclat dynamic front hub threadless, slides

sealed high quality japanese bearings | Spokes: 36h | Features: allen key inner axle for easy maintenance

smoothly onto axle | Colors: black, high polished, blue | Weight: 44g

narrow flange for better spoke clearance when grinding | Colors: black, orange, midnight teal, high polished Weight: 302g

MATCH FEMALE | MATCH FEMALE HUBGUARD

Material: 6061-T6 alloy | Features: Hollow aliminium female axle | 10mm bolts with 8mm allen key & 17mm wrench (female version) | Bearings: sealed bearings | Spokes: 36h Colors: black, raw, blue, orange, red | Weight: 265g

Material: 7075-T6 alloy | Colors: black, raw | Weight: 37g

H

MATCH MALE | MATCH MALE HUBGUARD

U B S – H U B G U A R D S

77 / 92 Material: 6061-T6 alloy | Features: 10mm hollow heat treated CrMo male axle | Bearings: sealed bearings

Material: 7075-T6 alloy | Colors: black, raw | Weight: 40g

Spokes: 36h | Colors: black, raw, blue, orange, red | Weight: 272 g

D Y N A M I C

C A S S E T T E

Material: 6061-T6 alloy hub-shell | Axle: 14mm hollow bore hardened heat-treated crmo axle | Bearings: 2 high quality japanese bearings | Spokes: 36h | Driver: not included | Features: 120 point engagment | male or female version availabe |hub direction can be switched from rsd to lsd with the same hub shell | allen key inner axle for easy maintenance | Colors: black, high polished, blue | Weight: 500g (female), 477g (regular)

H U B

B L I N D

F R E E C O A S T E R

|

H U B G U A R D

S – H U B G U A R D S

78 / 92 Material: 6061-T6 alloy hub-shell | Axle: 14mm hollow bore hardened heat-treated crmo axle | Bearings: 2 high

Material: 7075-T6 alloy | Features: screw-in anti-rotation pin | threadless, slides smoothly onto axle

quality japanese bearings | Spokes: 36h | Driver: RSD or LSD, 9t or 10t | driver features polymer bushing

fits on BLIND regular & female axle cassette hub | Colors: black, high polished, blue | Weight: 64g

Features:: unique freecoaster mechanism | interchangeable slack discs for custom setup | allen key inner axle for easy maintenance | Available as regular or female version | Colors: black, high polished, blue Weight: 563g g (regular)

PULSE CASSETTE | PULSE HUBGUARD

Material: 6061-T6 alloy hub-shell | Axle: 14mm hollow bore hardened heat-treated crmo axle | Bearings: 2 high

Material: 7075-T6 alloy | Features: screw-in anti-rotation pin | threadless, slides smoothly onto axle

quality japanese bearings | Spokes: 36h | Driver: 9t as standard (also available as aftermarket in other sizes) driver

fits on Pulse regular & female axle cassette hub, Dynamic regular & female axle cassette hub

features polymer bushing | Features: RHD & LHD ”SDS” system | allows switching the driver direction from rsd

Colors: black, high polished, blue | Weight: 57g

and lsd with the same hub | allen key inner axle for easy maintenance | Available as regular or female version Colors: black, high polished, blue | Weight: 459 g

H

MATCH CASSETTE | MATCH HUB GUARD

U B S – H U B G U A R D S

79 / 92 Material: 6061-T6 alloy | Axle: 14mm hollow heat treated CrMo male axle Bearings: sealed bearings

Material: 7075-T6 alloy | Colors: black, raw | Weight: 105 g

Spokes: 36h | Features: 6mm allen key inside the axle Colors: black, raw, blue, orange, red | Weight: 580g

GONG HUBGUARD

Material: full cnc 7075-T6 alloy | Features: threadless, slides smoothly onto axle | integrated rubber gasket to protect driver mechanism | fits over 9t and 10t drivers | Colors: black, high polished, blue | Weight: 70g

T I R

E S C A P E

E S

80 / 92

Material: 120 tpi construction, wire bead | Size: 2.3” or 2.1” | Features: high rated pressure 110 PSI | Colors: black/black, black/skin wall, black/white wall | Weight: 675 g (all black, 2.3”), 605 g (all black, 2.1”)

C O N T R O L

Material: 120 tpi construction, wire bead | Size: 2.3” or 2.1” | Features: high rated pressure 110 PSI | Colors: black/black, black/skin wall, black/white wall | Weight: 675 g (all black, 2.3”), 570 g (all black, 2.1”)

T

C O M M A N D

I R E S

81 / 92

Material: 120 tpi construction, wire bead | Size: 2.3” | Features: high rated pressure 110 PSI | Colors: black/black, black/skin wall, black/white wall | Weight: 650 g (all black)

D E H A R T

Sizes: 20 x 2.10”, 20 x 2.25” | Colors: black/black, black/tan wall, black/white wall, black/grey wall | PSI: 110 | Weight: 703 g (2.10”), 748 g (2.25”)

P E G

S L O T M A C H I N E

NATHAN

Material: 4140 crmo liquid heat-treated | Features: smaller diameter | double-butted dent prevention design

Material: liquid heat-treated crmo with molded nylon/fiber glass outer | Features: low friction nylon/fibre

light weight design 5 bore holes, between 5 slick cut-outs | Size: as 3/8” or 14mm axle hole version available

glass for faster grinding | sold as single | Size: 14mm axle, adapter included for 3/8” Outer Diameter: 42mm

Outer Diameter: 35mm Length: 4” (10mm) Weight: 4” 179 g (per piece)

Length: 4” (10mm) Weight: 200g

D O O M S D A Y

FA S H I O N A B LY L I G H T

Heat treated Chromoly Peg internally machined to reduce weight. Sold Individually. Outer Diameter: 35mm

Features: Offset center saves weight | Heat treated | Size: 10mm, 14mm

Length: 100mm 3/8”� (10mm) or 14mm | Weight: 198 g (per piece)

Colors: black oxide finish, matte red | Weight: 129 g (per piece)

L I T E

DIET GRINDER

Material: 4140 chromoly forged and heat treated | Features: Smaller diameter to help save weight | Anti rota-

Material: Heat treated 4140 Front specific peg | Designed by Sean Burns | 4.3” length (front) 4” (rear), Outer

tion pins | Fits on pegs 3/8 and 14mm axles | Shipped as a pair | Length: 4” | Weight: 207 g (per piece)

diameter: 32mm (front) 34mm (rear) | Anti rotation pins, fits 3/8” only | Colors: black, polished

S

82 / 92

Weight: 133 g (front) 164 g (rear)

C

C L O T H I N G

L O

YOU CAN FIND THE NEWEST CLOTHING LINEUP FROM OUR BRANDS ANYTIME UNDER: W W W. T R A F F I C - D I S T R I B U T I O N . C O M

T I N G

83 / 92

A C C

E - T O O L

E S S O I R E S

Material: crmo | Size: 188 x 30mm diameter | Colors: see current order sheet | Features: 8/10mm wrench | 15mm pedal wrench | spoke wrench | 1/19mm U brake wrench | 3, 4, 5, 6, 8mm hex bit | 17mm socket | Weight: TBC

84

KEYCHAIN

CHAINTOOL

Material: heat treated crmo | Size: 35 x 35 mm | Colors: black nickel, gold nickel, c.p.

Chain breaker made from steel construction with long handles for increased leverage | Compatible with most

Features: key ring loop | Weight: 38 g

half link and standard 1/8� chains | Includes extra replaceable pin inside the knurled handle | Color: black

LMB X WAX

LEDGE WAX

Color: orange | Weight: 135g

Material: lmb wax | Size: 90 x 90 x 35 mm | Colors: black, red, blue, green, pink

/ 92

Features: super fast wax compound | Weight: TBC

P H O T O :

V I L L E M

D E L A H A Y E

C

G A N S E N

L

F L O R E N T

V A N

O T I N G – D V D

85 / 92

86 / 92

I Z

P U L I D O

P H O T O :

A N D R E W

W H I T E

87 / 92

F O O

D U K E

H I G H

T W E A R

88 / 92

Color: black | Specs: suede / distressed | action leather upper | canvas tongue | action leather strap | mesh lining | cordura nylon fat | padding on ankle | + fat padded tongue | gum sole Color: red | Specs: suede / distressed | action leather upper | canvas tongue | action leather strap | mesh lining | cordura nylon fat | padding on ankle + fat padded tongue | gum sole Color: turquoise | Specs: suede / distressed | action leather upper | canvas tongue | action leather strap | mesh lining | cordura nylon fat | padding on ankle + fat padded tongue | gum sole Size: US. 7, 7.5, 8, 8.5, 9, 9.5, 10, 10.5, 11, 11.5, 12, 13

F

B E L M O N T

O O T W E A R

89 / 92

Color: black canvas | Specs: canvas upper, canvas tongue, mesh lining, mid padding on, ankle and tongue, gum sole Color: black leather | Specs: suede and full grain, leather upper, canvas tongue, mesh lining, mid padding on, ankle and tongue, gum sole Color: brown leather | Specs: textured leather upper, rough canvas tongue, mesh lining, mid padding on, ankle and tongue, gum sole Size: US. 7, 7.5, 8, 8.5, 9, 9.5, 10, 10.5, 11, 11.5, 12, 13

F O O

D U K E

L O W

T W E A R

90 / 92

Color: black | Specs: suede / distressed | action leather upper | canvas tongue | mesh lining | fat padding on | ankle and tongue | gum sole Color: navy red | Specs: suede / canvas upper | action leather | detailing | mesh lining | fat padding on | ankle and tongue | gum sole Size: US. 7, 7.5, 8, 8.5, 9, 9.5, 10, 10.5, 11, 11.5, 12, 13

R I V I E R A

M I D

Color: black | Specs: suede upper | action leather | paisley lining | mid padding on | ankle and tongue | gum sole | Size: US. 7, 7.5, 8, 8.5, 9, 9.5, 10, 10.5, 11, 11.5, 12, 13

F

R I V I E R A

M I D

O O T W E A R

Color: grey | Specs: denim canvas upper | suede detailing | paisley lining | mid padding on | ankle and tongue | gum sole | Size: US. 7, 7.5, 8, 8.5, 9, 9.5, 10, 10.5, 11, 11.5, 12, 13

91

V A L L E Y

/ 92

Color: black | Specs: canvas upper | summer cloth lining | light padding on | ankle and tongue | gum sole | Size: US. US. 7, 7.5, 8, 8.5, 9, 9.5, 10, 10.5, 11, 11.5, 12, 13 Color: ocean blue | Specs: canvas upper | summer cloth lining | light padding on | ankle and tongue | gum sole | Size: US. US. 7, 7.5, 8, 8.5, 9, 9.5, 10, 10.5, 11, 11.5, 12, 13

92 / 160

WE MAKE THINGS GMBH OSKAR-JÄGER-STRASSE 127 D-50825 KÖLN DEUTSCHLAND

TEL.: + 49 221 5000 57-21 (-23) FAX.: + 49 221 5000 57-29 MAIL: MAIL@TRAFFIC-DISTRIBUTION.COM W E B : W W W. T R A F F I C - D I S T R I B U T I O N . C O M W W W. FA C E B O O K . C O M / T R A F F I C D I S T R I B U T I O N


Traffic Distribution Catalog BMX 2012/2013