INSTALLATION INSTRUCTIONS ®
Vu Ryte Models 14SL, 14KB, 14HP, and 18SL, 18KB Your new Vu Ryte computer workstation is specially designed to help you eliminate many of the aches and pains associated with working at your computer and help you boost your productivity. We realize that instruction sheets can be a real drag, but if you will look at these instructions BEFORE you install your Vu Ryte, we think you will be glad you did. Let's begin by describing the Vu Ryte components. We’ll refer to the specific parts by name throughout these installation instructions. Refer to Figures 1 & 2 below. G Vu Ryte EASEL with EASEL BRACKET, CLIP, and LINE GUIDE SLIDE (see Fig. 1) G Vu Ryte BASE (see Fig. 2) G Vu Ryte LINE GUIDE TRACER (see Page 4 for usage recommendation) Before the actual installation, please confirm that you have all of the above. If you’re missing any components check your box to see if you overlooked it. Sometimes parts become loose during shipment. If you’re missing anything call 1-800-678-2629 and will get it to you.
Vu Ryte Components
Here is our current intellectual property: U.S. Patent 5,104,086 U.S. Patent 5,651,524 U.S. Patent 5,685,441 (D) - Vu Ryte, Inc. 1995 U.S. Patent Des. 399,834 Patente espaÁola No. 2099826 Deutsches Bundesgebrauchsmuster
U.S. Patent Des. 375,298 U.S. Patent Des. 376,787 U.S. Patent Des. 390,546 U.S. Patent Des. 437,600 Brevet No. EP 0595824 Other Patents Pending
ALL OF OUR PRODUCTS ARE PROUDL Y DESIGNED AND MADE IN THE U.S.A. This product is sold on an "as it stands" and "with all faults" basis. Vu Ryte, Inc. disclaims any implied warranties with respect to the product and makes no warranty of merchantability or fitness for any ex press o r particu lar purp ose. Vu R yte, Inc . shall not be liable for co nsequ ential or incid ental da mag es oc curring fro m any prod uct de fect.
Vu Ryte and VuRyser and Vision Vu are Trademarks of Vu Ryte, Inc. Copyright © 2005 Vu Ryte, Inc. - All Rights reserved (02/05 - Re vision)
Now let’s get started!
Ø Turn off po wer to
Ù Slide EASEL onto
monitor and CP U. Rem ove monitor. Place BASE under mon itor.
SLID E B RACK ET .
Ú Note: Two identical
Û Loosen DEPTH
VERTICAL SLOTS on each sides of the EASEL. These allow vertical adjustability. Position TOP of EASEL at bottom of your monitor screen by loosening THUMB NUTS on back of EASEL BRACKET, correctly position the EASEL, re-tightening THUMB NUTS...
ADJUSTMENT THUMB NUTS and pull out EASEL by sliding SUPPORT ARMS toward you.
Ü Loosen ANGLE
Ý At this point, push
ADJUSTMENT THUMB NUTS to determine preferred angle. Tighten THUMB NUTS.
EASEL as close to monitor as possible without blocking horizontal sliding. Tighten DEPTH ADJUSTMENT THUMB NUTS. Because your Vu Ryte has been engineered with multiple adjustability features, we suggest that you experiment with vertical, depth, and angle adjustments to find most comfortable and productive setting for YOU! For LINE GUIDE and CLIP use, see STEP Þ
Þ LINE GUIDE SLIDE has
Place the slot in the LINE GUIDE TRACER over the protruding portion of the LINE GUIDE SLIDE. As you press down, you will hear a “notching” sound. This allows you to maintain a straight line for different depths of documents. To move TRACER, grip end and slide up or down.
already been inserted into LINE GUIDE SLOT. LINE GUIDE SLIDE should move easily within the vertical LINE GUIDE SLOT.
ß Clip will slide
ONLY THE VU RYTE DOCUMENT HOLDER HAS BEEN INDEPENDENTLY TESTED FOR ERGONOMIC BENEFITS. Use of a “traditional” document holder had a muscle load THREE TIMES HIGHER than the Vu Ryte.
horizontally to any position on EASEL lip. If clip detaches, it may be reattached by placing the clip groove over the easel lip and “snapping” or “rolling” it on.
Superior Ratings For:
Vu Ryte preferred for:
neck comfort visual comfort overall comfort preference for use on the job
number of features customization ease of viewing visibility of text impression of productivity
For more complete statistical breakout, visit our Web Site at: www.vu-ryte.com or email us at: email@example.com