Issuu on Google+

CW driver 0910 (preliminary) Small CW driver for laser diodes up to 30 A Stable aluminum enclosure 15 V/DC up to 24 V/DC supply USB interface Analog interface

Beratrons CW driver for laser diodes up to 30 A is a perfect current supply for a multiplicity of laser diodes with a maximum current of 30 A and a maximum voltage of 12 V. The driver 0910 can be supplied with 15 V/DC up to 24 V/DC and is controlled via USB interface or analog interface. An integrated limit current control assures a safety operation of your laser diode. All parameters of operation can be saved in a nonvolatile memory.

Picture 1: front - view

A three color LED on the front side of the driver informs the user about the operational state. The driver is equipped with a current monitor output and a interlock for safety operation. Remarkable are the dimensions of only 10.4 x 2.4 x 7.2 cm³. The 0910 is air cooled. Additional cooling is not needed. Picture 2: rear - view

Version 1.0

Beratron GmbH ● Steinbachstr. 15 ● 52074 Aachen Germany ● Tel. +49 (0)241 8906-430 ● www.beratron.com


CW driver 0910 (preliminary)

Supply

15 V/DC up to 24 V/DC Connector Phoenix MSTB 25, HC/2-ST-5,08

max. laser diode current

selective 7.5A, 10A, 15A or 30A current rise-time < 30 µs over-current protection ripple ca. 3%

max. load voltage

up to max. Supply / 2

Cooling

air, integrated fans

USB interface

Mini - B

Analog interface

laser-diode current presetting On/Off TTL signal

Warning lamp (Relay)

24V DC or AC / 400 mA

Current monitor

Digital via USB or Analogue

Interlock

single, hard

Operation indicator

multicolour status - LED

Operation modes

internal mode (presetting via USB) external mode (presetting via analogue interface)

Enclosure

Aluminium

Weight

160 g

Dimensions

104 x 24 x 72 cm³ (without connectors)

Version 1.0

Beratron GmbH ● Steinbachstr. 15 ● 52074 Aachen Germany ● Tel. +49 (0)241 8906-430 ● www.beratron.com


CW driver 0910 (preliminary)