Oil Heaters Oil heaters are a vital part of any industrial process that uses petrochemicals, or are good simply for heating spaces at an energy efficient rate. They can save companies substantial amounts of money, allowing used oil to be recycled instead of dumped, and provide costefficient heat and energy for lower prices than other, more conventional fuels. Any used oil heater will have to generate a certain temperature to help its oil maintain its viscosity. Thatâ€™s why itâ€™s crucial to choose the right heater for the processes you hope to achieve. Flanged heaters are a particularly popular oil heater. They provide a moderate heat source that can evenly heat the product in your container. Another popular oil heater is the circulation heaters, which are used when your oil is part of a flowing liquid process, providing the small amounts of heat necessary to maintain good flow. The energy generated by an oil heater is relatively clean, relying as it does on recycled materials for a minimal amount of energy produced. It is estimated that every gallon of used oil that is recycled by facilities can be the equivalent of a new gallon of petroleum that has to be generated. And waste oil recycling creates far less pollution than producing new oil products simply by its nature â€“ it is recycling an existing product rather than creating a new one, thereby eliminating the large amounts of energy expended in the initial production process. A control panel is an essential component on your oil heater. It can provide precise readings that will avoid raising the oil heating temperature too high and burning it off. These controls also regulate power and prevent excessive use of electricity in your industrial processes. A good waste oil heater will be effective for crankcase oil, synthetic oil and other fuels. There has been some discussion as to whether additives added to oil have lately have caused the products to resist burning at lower temperatures, thus rendering some commercial oil heaters ineffective. However, many companies report no problems maintaining oil viscosity, so that problem may be isolated to a few fuels and heaters.
With costs for oil, electricity and other fuels rising, the oil heater is a key ingredient to maintaining good ways to keep costs down on heating your facility. Which creates perhaps the biggest problem of oil heaters -- increasing competition for waste oil. Where once restaurants, service stations and other exchanges gave away the fuel as a nuisance (one estimate was three out of four facilities with waste oil generated by their services and products used to simply give it away), rising energy prices and increased competition for the resource have made it a more precious commodity. Thus, the golden days when you were largely doing a facility a favor by hauling used oil away are largely gone. Still, many places must dispose of the waste oil somehow, so deals can still be struck. Many companies offer waste oil heaters for industrial processes and space heating. The best offer products that are constructed of durable materials and are backed by years of experience in creating oil heaters. You should check out several manufacturers before purchasing an oil heater. For more information visit http://www.wattco.com.