Page 1

ENDURANCE ™ I

Waterous has you covered with Total Integration – a comprehensive program that ensures fire departments have everything needed from specification

to implementation. Total Integration guarantees the right equipment, proper installation, thorough education and lifetime support with zero exceptions.

1 - EVALUATE

4 - ORIENTATE

Waterous assesses existing equipment, short and long term needs, fire scenarios and other factors to create an accurate, up to date evaluation of the situation.

Waterous provides thorough equipment orientation ensuring fire departments get the best performance with the safest operation. Waterous also offers the only CAFS instructors in the industry.

2 - PROPOSE Waterous studies the data and objectives to create a fire suppression equipment specification program that meets the needs and respects the budget.

3 - IMPLEMENT Waterous takes proactive measures to provide the best possible circumstances for proper equipment installation/ retrofitting for optimum performance and longevity.

5 - SUPPORT Waterous backs its equipment with industry leading warranties, including 5- year coverage for pumps, 2- year coverage for Advantus®, 1-year coverage for Aquis™, lifetime call support on all products, and, in addition, Waterous offers the Total Protection Package (TTP-5) that increases the coverage to include labor expenses to dismantle, remove and reinstall covered products or parts.

Corporate Headquarters 125 HARDMAN AVENUE SOUTH, SOUTH SAINT PAUL, MINNESOTA 55075-2456

651- 450-5000

www.waterousco.com

F-2606 (10/09)

Contents in this brochure are subject to change without notice.

MIDSHIP

I

PTO

I

ARFF

I

HL SERIES

I

ACCESSORIES


IN THE HEAT OF THE FIRE,

WATEROUS VEHICLE-MOUNTED FIRE PUMPS DELIVER. Responding to a fire is no time to discover that you have an unreliable piece of equipment. That’s why more firehouses around the world depend on Waterous fire pumps than any other option. With thousands in use, Waterous fire pumps are proven to be rugged, reliable and revolutionary in design. Every Waterous fire pump comes with an industry-exclusive 5-year warranty along with the features, accessories and power fire departments need to suppress the most dangerous fires. Never be caught with anything less than the best. Specify the most trusted fire pump – Waterous.


FOAM SYSTEMS Aquis™ Foam Proportioner • Complete aspirated foam system • Available 1.5 GPM (5.68 l/min) or

Discharge Valve

2.5 GPM (9.46 l/min) @ 150 psi (10 bar) foam output CONTROL PANEL • Stainless steel paddlewheel flow meter

• Available in 2-1/2 inch standard, 2-1/2 inch full-flow,

• 16-bit mixed signal microcontroller

and 3-1/2 inch sizes

• Blue LED illuminated operator panel

• Available with Rack-and-Sector push/pull controls,

(standard on 2.5 models)

manual worm gear and electric actuators

• Onsite and online laptop diagnostics

• Worm gear and electric actuators comply with

• Maximum operating pressure: 450 psi (32 bar)

NFPA requirements for slow actuation • All use chrome-plated bronze valve balls • Lasts longer, resists scratching and scoring from

Advantus® Foam System

sand and grit

• Complete aspirated foam system

•Spring-loaded floating seal assemblies

• Available 3 GPM (11.3 l/min) or 6 GPM

• Seals tight, no adjustments required

(22.6 l/min) @ 150 psi (10 bar) foam output • Stainless steel manifold • Hydra-Cell foam pump

Ball-Type Transfer Valve

• 4-sensor technology • Full-flow brass body check valve

• Available with optional electric actuator

• 16-bit mixed signal microcontroller

• Spring-loaded floating seal does not

• Onsite and online laptop diagnostics

jam due to sand in the water

• Maximum operating pressure: 450 psi (32 bar) * • Pre-plumbed, pre-calibrated, pre-tested • Factory-mounted to midship fire pump • Saves valuable compartment space * High pressure 600 psi version available

OVERHEAD

Tank-to-Pump Valve • 3-1/2 inch full flow

Monarch Intake Valve

• Chrome-plated bronze ball

• Manual, electric or pneumatic operation

• Spring-loaded floating seal assembly

• Stainless steel Wafer-Sphere element • Polymeric flexible lip seal

Priming Systems Impeller Shaft Assembly

• Fast, dependable priming

• ON - OFF valve

• Electrically driven

• Indicating lights

• Outboard ball bearing

• Operates independently from the pump

• Panel-mounted strainer

• Labyrinth-type reverse flow wear rings

• Lubrication option (requires

• Optional flame-plated impeller hubs

- Resists “bonding” to moving element

Discharge Relief Valve

• VPO oil-free primer

• Includes provision for pre-butterfly relief valve

CONTROL PANEL

• Pilot-operated for improved performance

priming-tank)

(Standard on CMU, CSU)

• Easy to set with pressure scale markings

• Vacuum activated priming valve

- Both reduce water bypass loss and

• Panel-mounted strainer

C20 Transmission

result in longer life • Optional mechanical shaft seals

• High-strength aluminum construction

- No routine maintenance required • Separable impeller shaft - Reduces downtime for repairs

• “Silent” Morse HV drive chain

Pneumatic Shift

• Smoother transfer of power • 16,000 lb./ft. torque rating

• Spring-loaded locking control prevents accidental movement • Dual-action cylinder stays in position in case of air loss

C A F S y s t e m s™ CONTROL PANEL

OPTIONAL PROTECTION

Eclipse™ CAFSystems • Easy-to-learn, pre-plumbed, pre-mounted, pre-calibrated complete compressed air foam system

Overheat Protection Manager (OPM)

Zinc Anode

• Available on CS, CSU and CMU midship-mounted fire pumps

• Opens when water inside the pump reaches 140º F (60º C)

• Optional corrosion protection

• 200 SCFM rotary-screw air compressor encapsulated in oil sump

• Flashing warning light on pump panel is triggered when

• Fits any unused intake pad or pipe

water reaches 180º F (82º C) • Water is released to ground

Intake Relief Valve

tap in the intake fittings

Zinc Intake Screen • Replaceable corrosion protection

• Advantus® Foam System saves valuable compartment space • Powered off the main pump via a “hot-shift” pneumatic clutch • Engage or disengage with pump running • Toothed-belt drive requires no lubrication or maintenance

CONTROL PANEL


SINGLE-STAGE FIRE PUMPS

S101C20 - LEANER, LIGHTER. NEVER WEAKER. The smart addition of the new "Ram Horn" style intake allows for easier OEM installation and drafting from either side of the truck. Despite the added versatility, the overall footprint has been significantly reduced, creating more compartment space

SINGLE-STAGE FIRE PUMPS

YOU DON'T STAY AHEAD BY FALLING BACK ON OLD DESIGNS. Waterous never stands pat on innovation. Our new

manufactured to deliver more power, performance,

line of fully re-engineered Endurance™ fire pumps is

usability and versatility. At Waterous, we believe

testament to that. It represents the next generation

it is our duty to push the limits. Endurance fire

in single stage pump thinking. Each model in

pumps do just that, without sacrificing reliability,

the Endurance line has been rethought and

longevity or ease of operation.

for additional equipment. S101 FLOW SPECS: • 2000 GPM @ 150 psi • 7570 l/min @ 10 bar • • • • • • •

New “Ram Horn” style intake Smaller footprint Easier OEM installation Dual-side drafting New C20 transmission is 40 lbs. lighter than the C10 transmission Uses just 9 quarts of oil (compared to 14 quarts in the C10) Operates at a very cool 175 F, versus a more common 200 F

°

°

• New Allison Transmission MY09 software/wiring package creates a true neutral position for improved pump shifting - Contact your OEM to assure you receive this feature. • New shifting mechanism requires fewer parts

CSC20 - THE LIGHTER FIRE FIGHTER. CXS - WE MADE IT BETTER. THEN WE MADE IT SMALLER.

The fully manifolded Endurance CSC20 is 16% lighter than its predecessor. Additionally, it features a smaller footprint to meet the ever-increasing demands for space on a fire apparatus without sacrificing power, performance or utility.

With the introduction of a new “Ram Horn” style intake fitting, the CX can provide

CS FLOW SPECS:

up to 1500 GPM at 150 PSI. Of course, that’s providing you use both inlets of the

• 1250 GPM @ 150 psi

“Ram Horn” fitting.

• 4750 l/min @ 10 bar

CXS FLOW SPECS: • 1500 GPM @ 150 psi

CSU FLOW SPECS: • 2250 GPM @ 150 psi • 8550 l/min @ 10 bar • • • • •

Lighter weight Smaller footprint New C20 transmission is 40 lbs. lighter than the C10 transmission Uses just 9 quarts of oil (compared to 14 quarts in the C10) Operates at a very cool 175 F, versus a more common 200 F

° ° • New Allison Transmission MY09 software/wiring package creates a true neutral position for improved pump shifting - Contact your OEM to assure you receive this feature. • New shifting mechanism requires fewer parts

• 5700 l/min @ 10.3 bar • New “Ram Horn” style intake • CAFS-capable with a Waterous 150 CFM CAFSystem™ • New C20 transmission is 40 lbs. lighter than the C10 transmission ("K" transmission shown) • Uses just 9 quarts of oil (compared to 14 quarts in the C10) • Operates at a very cool 175 F, versus a more common 200 F • New Allison Transmission MY09 software/wiring package creates a true neutral position for improved pump shifting Contact your OEM to assure you receive this feature. • New shifting mechanism requires fewer parts

°

°


MIDSHIP FIRE PUMPS

S100C20/S100 PUMP Get the power and performance of a traditional midship fire pump in a compact,

MIDSHIP FIRE PUMPS

A PUMP FOR EVERY APPLICATION. Waterous midship pumps provide fire industry

and exclusive design features, Waterous midship

professionals with easy-to-operate systems that

pumps have become the primary firefighting tools

offer the most efficient water delivery system

of fire departments around the globe.

lightweight design. Made of ductile iron, the S100C20 and S100D are nearly 35% lighter, and yet 25% stronger than identical pumps made with gray iron. Available as a direct-engine mount or matched with a Waterous C20 aluminum case transmission. S100C10 FLOW SPECS: • Up to 2000 GPM @ 150 psi • Up to 7600 l/min @ 10.3 bar S100D FLOW SPECS: • Up to 2000 GPM @ 150 psi

on the market. Admired for their craftsmanship

• Up to 7600 l/min @ 10.3 bar • • • • • • • • •

CM/CMU PUMP The low-profile midship two-stage series / parallel pump with ball-type transfer valve allows you to switch from pressure to volume smoothly and easily. CM FLOW SPECS: • 500, 750, 1000 and 1250 GPM @ 150 psi • 1900, 2850, 3800 and 4750 l/min @ 10.3 bar CMU FLOW SPECS: • 1500, 1750, 2000 and 2250 GPM @ 150 psi • 5700, 6625, 7750 and 8550 l/min @ 10.3 bar • Flame-plated impellers (standard on CMU, optional on CM) • Two-piece, horizontally-split, high-tensile strength cast iron pump casing • Optional bronze pump casing

• All deep-groove oil and grease lubricated ball bearings located outside the pump casing • Bronze double-hubbed accurately balanced impellers • Stainless steel separable impeller shaft • Replaceable bronze impeller rings • Flinger rings mounted on impeller shaft • Adjustable BFG packing standard (spring-loaded mechanical seal available)

Cast ductile iron body Dual stripping edge volute Passive lubrication system Self-adjusting mechanical seal Replaceable bronze wear rings Mechanically and hydraulically balanced impeller All deep-groove anti-friction ball bearings, oil-splash lubricated 5-inch ANSI flange or optional end-flanged discharge manifold 5-year warranty

CGVGPA PUMP A simple-to-operate, efficient-to-run and easy-todepend on single-stage pump that’s perfect for applications that require a little less power. CGVGPA FLOW SPECS: • 750 GPM @ 150 psi for NFPA 1901 • 2850 l/min @ 10.3 bar

CX PUMP

• 500, 600 and 700 GPM for NFPA 1902 • 1900, 2250 and 2650 l/min

Versatile and adaptable, the CX can be mounted midship or in front of the engine if needed. The CX can even be used as a PTO pump or direct-engine mounted. It’s an ideal solution for specialty applications or tight spaces. CX FLOW SPECS: • 750 to 1250 GPM @ 150 psi • 2850 to 4750 l/min @ 10.3 bar • Pressures to 350 psi (24.1 bar) • End-suction/vertically-split volute • Self-adjusting mechanical seal

S100C20

• Mechanically and hydraulically balanced impeller • Replaceable bronze impeller rings • Optional flame-plated impeller

• • • • • • • • •

All deep-groove, oil-and-grease-lubricated ball bearings located outside the pump casing Bronze double-hubbed accurately balanced impeller Stainless steel shaft Replaceable bronze wear rings Bronze-fitted, high-tensile strength cast iron pump casing Optional bronze pump casing Self-adjusting mechanical seal Flinger rings mounted on impeller shaft 5-year warranty

S100D


PTO FIRE PUMPS

CPK4 PUMP FLOW SPECS:

PTO FIRE PUMPS

PUMPING ON THE GO. Provide true "pump and roll" capability while

Available in multiple sizes and styles, Waterous

reducing transmission wear on your apparatus by

has a PTO fire pump to fit your requirements and

adding a PTO fire pump to your firefighting arsenal.

apparatus set-up perfectly.

An ultra high-pressure, lightweight, 4-stage centrifugal pump. Able to produce high-pressure fog while the pumper is in motion or stationary.

• 75 GPM (285 l/min) at 1250 PSI (86 bar) • Two-piece, horizontally-split, high-tensile, close-grained, gray iron casings (bronze optional) • Ni-resist; special “stepped” designed wear rings reduce internal leakage and increase efficiency • Bronze, hydraulically and mechanically balanced impellers • Impeller hubs are “stepped” to minimize internal bypass • Adjustable braided flexible graphite (BFG) packing • Available with either clockwise or counter-clockwise rotation of input shaft

CGVK PUMP FLOW SPECS:

• 500 GPM (1900 l/min) to 750 GPM (2850 l/min) @ 150 PSI (10 bar) • Special rating of 1000 GPM (3800 l/min) or 350 PSI (24 bar)

CPK2 PUMP

FLOW SPECS: • 300 GPM (1135 l/min) @ 150 psi (10 bar) Maximum Flow • 60 GPM (227 l/min) @ 400 psi (28 bar) Maximum Pressure

Driven by a transmission-sidemounted PTO, the CPK2 can also be powered by optional direct-engine mount. Able to accommodate multiple lines for straight stream or fog nozzles.

• • • • • • •

Optional bronze pump casing Multiple gearbox mounts (horizontally, vertically, or inverted) Ten optional speed-increasing transmission ratios Crown-shaved, carburized and hardened helical cut, constant-mesh quiet gears 17-4 stainless steel, heat-treated impeller shaft (monel shaft optional) Bronze double-hubbed precision-balanced impeller 3-inch NPT or BSP intake; 2-inch NPT or BSP discharge

The single-stage design with vertically-split volute and pump transmission provides simple operation, easy maintanence and high reserve capacity.

FLOW SPECS:

• 5-year warranty

FLOW SPECS:

• • • • • • A compact two-stage pump with “pump and roll” capability making it ideal for extinguishing grass and brush fires.

High tensile, one-piece, close-grained gray iron casing (bronze optional) Bronze double-hubbed, precision-balanced impellers. Separable impeller shaft for ease of serviceability. Push/pull manual bronze transfer valve (in bronze housing) Available in either rotation of input shaft 4-inch NPT tee adapter intake; two 2 inch or 2.5 inch NPT tee adapter (or 2.5 inch tapped flange) discharge • PTO or direct-engine, bell-housing mount • Ten optional speed-increasing transmission ratios • 5-year warranty

• 750 GPM (2850 l/min) to 1250 GPM (4750 l/min) • 150 PSI (10 bar)

CPK3 PUMP • 60 GPM (227 l/min) @ 800 psi (55 bar) Maximum Pressure

High-tensile, close-grained gray iron (bronze optional) transmission casing Constant mesh, helical gears made of alloy steel 17-4 stainless steel, heat-treated impeller shaft Fully-enclosed, bronze, double-hubbed impeller with flame-plated hubs Victaulic®, threaded or flanged intake connections Face-type, self-adjusting corrosion- and wear-resistant mechanical seals. 5-year warranty

CXK PUMP

(BSP threads available straight or tapered)

• 500 GPM (1900 l/min) @ 150 PSI (10 bar) Maximum Flow

• • • • • • •

A single-stage end-suction pump for ARFF trucks and fire boats. Midship mounted and driven by a PTO drive, the CXK can also be front-mounted or direct-driven.

• High-tensile, close-grained iron (bronze optional), two-piece, vertically-split volute body • Constant mesh, helical gears made of alloy steel • 17-4 stainless steel, heat-treated impeller shaft • Fully-enclosed, bronze, double-hubbed, precision-balanced impeller • Bronze replaceable wear rings • Face-type, self-adjusting corrosion- and wear-resistant mechanical seals. • 5-year warranty

CLK PUMP FLOW SPECS:

• 500 GPM (1900 l/min) @ 150 PSI (10 bar) • 350 PSI (24) bar Maximum Pressure

One-piece design featuring intake and discharge arrangements in a wide variety of options to meet your requirements.

• High-tensile, one-piece, gray iron casing • Multiple transmission mounting options (front-housing, bell-housing-direct or PTO) • Choice of 4-inch NH or BSP threaded-end intake • Bronze, double-hubbed, precision-balanced impeller • 17-4 stainless steel, heat-treated impeller shaft • Maintenance-free, self-adjusting shaft seal • Hardened, helical cut, constant-mesh gears • 5-year warranty


ARFF FIRE PUMPS

FIREFIGHTING SYSTEMS YOU CAN COUNT ON.

HL SERIES FIRE PUMPS

EFFECTIVE FIRE SUPPRESSION IN ANY LANGUAGE.

Whether fighting fires on the open sea or battling

quality materials using the latest technology—

blazes on the runway, you demand pumps that

so you never have to worry about performance

exceed performance standards. To meet these

or reliability. Tough and rugged, Waterous ARFF

Specifically designed for international-style fire

and feature built-in high-pressure relief valves for

demands, our fireboat and aircraft rescue and

pumps deliver the type of knockdown power you

vehicles, the compact, rear-mounted HL series

enhanced safety. Both the HL200 and HL300 models

firefighting (ARFF) pumps are built with the highest

need, when you need it most.

pumps deliver high and low pressure simultaneously,

are backed by an industry-exclusive 5-year warranty.

CH-4 PUMP

HL200 PUMP

CH-4 FLOW SPECS:

HL200 FLOW SPECS:

• 1400 GPM (5300 L/min.) @ 250 PSI (17 bar) • Bronze (cast iron optional), horizontally-split volute body • 17-4 stainless steel impeller shaft • Oil- or grease-lubricated ball bearings

• Fully-enclosed, bronze, double-hubbed precision-balanced impeller • Bronze replaceable wear rings • 5-year warranty

CR PUMP

• Low Pressure Spec: 2000 l/min @10 bar (3-meter lift) • • • • • •

• High Pressure Spec: 400 l/min @ 40 bar Available in mid-mount configuration Optional round-the-pump foam system Optional operator’s panel Optional Storz fittings Bronze (gunmetal) construction available 5-year warranty

CR FLOW SPECS: • 2050 GPM (7800 L/min.) @ 250 PSI (17 bar) • Gray iron (bronze optional), vertically-split volute body • 17-4 stainless steel impeller shaft • Oil-splash lubricated ball bearings

• Fully-enclosed, bronze, double-hubbed precision-balanced impeller • Bronze replaceable wear rings • 5-year warranty

HL300 PUMP HL300 FLOW SPECS:

CZ PUMP

• Low Pressure Spec: 3000 l/min @10 bar (3-meter lift)

CZ FLOW SPECS: • 950 GPM (3600 L/min.) @ 260 PSI (18 bar) CZU FLOW SPECS: • 1500 GPM (5700 L/min.) @ 250 PSI (17 bar) • High-tensile gray iron (bronze optional), vertically-split casing • 17-4 stainless steel impeller shaft • Oil-splash lubricated ball bearings

• Fully-enclosed, bronze, double-hubbed precision-balanced impeller • Bronze replaceable wear rings • 5-year warranty

• • • • •

• High Pressure Spec: 400 l/min @ 40 bar Available in mid-mount configuration Optional round-the-pump foam system Optional operator’s panel Optional Storz fittings Bronze (gunmetal) construction available

• 5-year warranty


WATEROUS FIRE PUMP ACCESSORIES

WATEROUS FOAM SYSTEMS

GETTING THE MOST OUT OF YOUR MIDSHIP FIRE PUMP. Waterous vehicle-mounted fire pumps give you the power you need. Now equip them to fit

DISCHARGE VALVES • • • •

Chromium-plated bronze valve ball Spring-loaded floating seal assembly Multi-purpose drainport Manual, push/pull, twist lock (2.5”) mechanism with panel-mounted “T” handle lock • Optional electric actuator complies with NFPA requirements for slow actuation

DISCHARGE RELIEF VALVE

OVERHEAT PROTECTION MANAGER

MONARCH™ INTAKE VALVE

• Opens when water inside the pump reaches 140º F (60º C) • Flashing warning light on pump panel is triggered when water reaches 180º F (82º C) • Water is released to ground

• • • •

• Controls discharge pressure by bypassing flow from discharge back to suction • Control discharge pressure up to 300 psi (20 bar) • Available in three sizes, up to 2250 GPM (8500 l/min)

your specific operation by selecting the perfect accompanying accessories.

ADVANTUS ® FOAM SYSTEM • • • • • • • •

Complete aspirated foam system 4-sensor technology 2-year warranty and fully-integrated service Stainless steel foam manifold Full-flow brass body check valve 16-bit mixed signal microcontroller Onsite and online laptop diagnostics Available 3 GPM (11.3 l/min) or 6 GPM (22.6 l/min) @ 150 PSI (10 bar) foam output • Maximum operating pressure: 450 PSI (32 bar)

Manual, electric or pneumatic operation Stainless steel Wafer-Sphere® element Polymeric flexible lip seal Provision for pre-butterfly relief valve

PRIMING PUMPS • • • • •

VPO oil-free primer Fast, dependable priming Electrically driven Operates independently from the pump Lubrication option (requires priming tank)

INTAKE RELIEF VALVE • Pilot-operated for improved performance • Pressure scale markings • Panel-mounted strainer

AQUIS™ FOAM PROPORTIONER • • • • •

Complete aspirated foam system 1-year warranty and service Stainless steel paddlewheel flow meter 16-bit mixed signal microcontroller Blue LED illuminated operator panel (standard on 2.5 models)

• Onsite and online laptop diagnostics • Available 1.5 GPM (5.68 l/min) or 2.5 GPM (9.46 l/min) @ 150 psi (10 bar) foam output • Maximum operating pressure: 450 PSI (32 bar)

PRIMING VALVES • • • •

Vacuum Activated Priming (VAP) Valve Stainless steel valve stem Opens automatically during pump priming Closes automatically when primer is deactivated

PNEUMATIC SHIFT • Spring-loaded locking control • Dual-action cylinder


ENDURANCE ™ I

Waterous has you covered with Total Integration – a comprehensive program that ensures fire departments have everything needed from specification

to implementation. Total Integration guarantees the right equipment, proper installation, thorough education and lifetime support with zero exceptions.

1 - EVALUATE

4 - ORIENTATE

Waterous assesses existing equipment, short and long term needs, fire scenarios and other factors to create an accurate, up to date evaluation of the situation.

Waterous provides thorough equipment orientation ensuring fire departments get the best performance with the safest operation. Waterous also offers the only CAFS instructors in the industry.

2 - PROPOSE Waterous studies the data and objectives to create a fire suppression equipment specification program that meets the needs and respects the budget.

3 - IMPLEMENT Waterous takes proactive measures to provide the best possible circumstances for proper equipment installation/ retrofitting for optimum performance and longevity.

5 - SUPPORT Waterous backs its equipment with industry leading warranties, including 5- year coverage for pumps, 2- year coverage for Advantus®, 1-year coverage for Aquis™, lifetime call support on all products, and, in addition, Waterous offers the Total Protection Package (TTP-5) that increases the coverage to include labor expenses to dismantle, remove and reinstall covered products or parts.

Corporate Headquarters 125 HARDMAN AVENUE SOUTH, SOUTH SAINT PAUL, MINNESOTA 55075-2456

651- 450-5000

www.waterousco.com

F-2606 (10/09)

Contents in this brochure are subject to change without notice.

MIDSHIP

I

PTO

I

ARFF

I

HL SERIES

I

ACCESSORIES

Waterous Vehicle Mounted Pumps Brochure 10/09  

Waterous Vehicle Mounted Pumps Brochure 10/09