Page 1

Importance of traffic control systems. Traffic situations do need to be controlled in every way possible. Freeway construction, repairing the roadways, or if a road is blocked due to snow, severe weather, mowing operations, or any other factor that may affect the flow of traffic. In a high traffic situation where there is traffic control, there are usually traffic safety cones leading up to the work site to improve and ensure safety.

These areas between the traffic safety cones and the point where the traffic is no longer being controlled are known as the traffic control zones. Driving through traffic control zones safely requires you know a few key rules and signs including traffic safety cones as far as safety is concerned. Here are 5 traffic control zones that you must understand in order to travel safely through a traffic construction environment. 1. Advance Warning Area The advance warning area is the point where the initial traffic safety cones are placed so you as a motor-vehicle operator can prepare to make the correct manoeuvres. A lot of traffic control companies sell this sort of tools including idot traffic cameras. In a traffic environment where there is no shoulder closure, just a single sign will be enough because the traffic construction isn’t choking the flow of traffic. On two-way or multilane roads, traffic safety cones should be placed on all the roads to slow the speed traffic in case stopping is necessary. Message-


Information-Action (MIA) signing should be displayed with all the signs to be placed on the road. The first sign informs motorists that they are approaching an area where work is ongoing. The message will read something like “ROAD WORK AHEAD”. The next sign will contain information about what the motorist should expect ahead. The message will read something like “SINGLE LANE ROAD AHEAD”, and the third sign is the action to take and the message on the road sign will say something like “BE PREPARED TO STOP”. There are various traffic control companies that can deliver such signs on demand in your area. 2. Transition Area

In the transition area, the shoulder or lane is closed with the use of channelizing devices, which can be orange traffic cones or idot traffic cameras to keep an eye on the traffic. In a situation where there is a problem of restricted sight distance such as a sharp horizontal or vertical curve, the lane closure should begin at quite a reasonable distance before the view obstruction. Lane closure should not be placed at the end of curves, so you won’t need to worry about missing it and driving off a cliff. That’s why transition areas are such an important phase in traffic control zones. Governments contact best traffic control companies for such equipments. 3. Buffer Space The buffer space is the area that is not occupied by the work area and transition area. The buffer space exists to make sure the area is safe for both workers and vehicles moving. Worker safey has always been an important aspect as any vehicle cans rush into these construction areas, which can put lives at risk. It’s very important to give space to workers and construction equipment for their safety and yours, as you will be liable for their safety in case of an accident. Idot traffic cameras must be installed in the area to keep a track of such accidents. 4. Work Area The work area is literally the area where equipment is placed and where the workers carry out maintenance operations. You will know it when you see it, as it is the entire reason for any traffic control signage you see leading up to a road work site. Monitoring of such areas is done through Idot traffic cameras.


5. Termination Area The termination area is the zone after the work area. The termination area is important because it safely releases traffic to resume normally without any hindrances. This area is just as important as any of the others because people will literally crash after leaving a traffic construction zone, thinking they can stop paying attention again. If you are looking for reputable traffic control companies that deal in such equipments. Warning lites of Southern Illinois can be the best choice. You can visit them at www.warninglitesofsouthernillinois.com for more info or call at 618-3975565.

traffic safety cones, traffic control companies at warninglitesofsouthernillinois.com  

We are the Authority on Traffic Safety and Signage, We provide the rental, sale and installation of temporary and permanent traffic control...

traffic safety cones, traffic control companies at warninglitesofsouthernillinois.com  

We are the Authority on Traffic Safety and Signage, We provide the rental, sale and installation of temporary and permanent traffic control...

Advertisement