Page 1

This page is intentionally left blank.


Sheet Stock Options

Veneers, Plywood & MDF Veneer Sheet Stock & Panel Descriptions

Wood Veneer with Resin Back (Non Adhesive) Lb/Sq.Ft. = .194

K

Wood Veneer With Wood Back (Non Adhesive) Lb/Sq.Ft. = .123 Wood Veneer with Paper Back (Non Adhesive) Lb/Sq.Ft. = .106 Wood Veneer with Wood Back (PSA - Peel & Stick) Lb/Sq.Ft. = .177 Wood Veneer with Paper Back (PSA - Peel & Stick) Lb/Sq.Ft. = .148 Paintable Laminate (Non Adhesive) Lb/Sq.Ft. = .079 Paintable Laminate (PSA - Peel & Stick) Lb/Sq.Ft. = .129 ⅛" Thick Sheet Veneer Core Lb/Sq.Ft. = .460 ⅛" Thick Sheet MDF Core Lb/Sq.Ft. = .739 ¼" Thick Sheet MDF Core Lb/Sq.Ft. = .934 ¼" Thick Sheet MDF Core Lb/Sq.Ft. = .934 ¼" Thick Sheet Veneer Core Lb/Sq.Ft. = .448 ½" MDF Core Lb/Sq.Ft. = 1.788 ½" Veneer Core Lb/Sq.Ft. = 1.220

Veneer Sheet Stock Wood veneer with a resin soaked backer sheet that has been permanently bonded under heat and pressure. This provides the sheet with dimensional stability, strength and flexibility and acts as a barrier to prevent adhesives and finishes from penetrating. Can be used with a solvent based or water based contact adhesive. Resin backed veneers are also sometimes referred to as DuraBack®, PolyBak, or PolyLam. Wood Veneer with a wood back suitable for use with contact adhesive. Wood Veneer with a paper back suitable for use with contact adhesive. 2 Ply Veneer sheet stock that provides the look of solid wood plus 3M “Peel and Stick” adhesive. Wood Veneer with a paper back plus 3M “Peel and Stick” adhesive. Paintable Laminate suitable for use with contact adhesive. Paintable Laminate plus 3M "Peel and Stick" adhesive. ⅛" Thick Sheet Stock “A” Face grade wood veneer, 3 ply veneer core with a #4 back. The #4 back may be a different wood species than the “A” face. “A” Face grade wood veneer, MDF core with a #4 back. The #4 back may be a different wood species than the “A” face. ¼" Thick Sheet Stock “A” Face grade wood veneer, MDF core with a #1 back. “A” Face grade wood veneer, MDF core with a #4 back. The #4 back may be a different wood species than the “A” face. “A” or “B” Face grade wood veneer, veneer core with various grade backs. ½" Thick Sheet Stock “A” Face grade wood veneer, MDF core with a #1 back. “A” Face grade wood veneer, veneer core with a #1 back. ⅝" Thick Sheet Stock

⅝" MDF Core Lb/Sq.Ft. = 2.502 ⅝" Veneer Core Lb/Sq.Ft. = 1.647

“A” Face grade wood veneer, MDF core with a #1 back. “A” Face grade wood veneer, veneer core with a #1 back. /16" Combi-Core Combi-core has veneer core inner plies with MDF crossbands. This material offers similar strength and stability to veneer core but has the void-free surface quality of MDF. Also available in Custom Pressed Options, see Section K.3. ¾" Thick Sheet Stock 11

/16" Combi-Core Lb/Sq.Ft. = 2.257 11

¾" MDF Core “AA”, “A” or “B” Face grade wood veneer, MDF core with a #1 back. Lb/Sq.Ft. = 2.897 ¾" Veneer Core “A” Face grade wood veneer, veneer core with a #1 back. Lb/Sq.Ft. = 1.833 Note: All veneers are book matched on the face side, with the exception of Hickory, all Rustic and Knotty Grades.

► For PRICING ► See Section K.1 in our current Wholesale Pricing Catalog. K.1.2

V16.3

®

®

.com

C

(Phone) 1-800-237-1326 6:00AM - 4:30PM CST (24 Hour Fax) 1-608-781-3667


Veneers, Plywood & MDF

Sheet Stock Options

Veneer Slicing Methods Plain Slice

Rotary Cut

• ½ of a log is held heart side against the table. • Slicing is done parallel to the center line of the log. • This cut produces “cathedral” grain.

• The log is turned against a razor sharp blade, like unwinding a roll of paper. • This cut produces a wide veneer with a bold variegated pattern.

Rift Cut

Quarter Sawn

• Slicing is done at a 15° angle across the growth rings to produce a straight grain look without “flake”.

• Slicing is done across the growth rings to produce a straight grain look. • Sometimes “flake” is present in oak due to the Medullary ray cells.

Cutting Direction (3) (4)

(1)

(2)

(1) Rotary Cut - The log is turned against a razor sharp blade, like unwinding a roll paper. (2) Plain Slice - Slicing is done parallel to the center line of the log. (3) Quarter Sawn - Slicing is done across the growth rings to produce a straight grain look. (4) Rift Cut - Slicing is done at a 15° angle across the growth rings to produce a straight grain look without “flake” Book Match Veneer Book Match: The most common matching type. Alternating leaves are turned over, so that adjacent leaves are opened like the pages of a book. Visual Effect: Veneer joints match, creating a symmetrical pattern. Yields maximum continuity of grain. Prominent characteristics ascend or descend across the face. *WalzCraft offers all veneers as being Book Matched.

*Illustrations Provided Compliments of Saunders Wood Specialties, Inc.* ®

► For PRICING ► See Section K.1 in our current Wholesale Pricing Catalog. ®

.com

C

99.7% American Made

K.1.3

V16.3

K


Sheet Stock Options

Veneers, Plywood & MDF

Cut and Ripped Sheet Stock Size Descriptions

RCSS = Rough Cut to Stock Sizes (Only)

RTRW = Rip to Rough Width

K

PCTS = Precision Cut to Size

A sheet that is only available in the following sizes: • Veneer, Paintable Laminate: 4'x8', 2'x8', 4'x4', 2'x4', 24"x32". • ⅛", 7/32 ", ¼", ⅜", ½", ⅝", 11/16", ¾", 1" Thick Panels: 4'x8', 2'x8', 4'x4', 2'x4', 24"x32". • ⅛" HDF, ⅞" Thick Panels: 60"x96", 30"x96", 60"x48", 30"x48". • 7/32 " Raw MDF: 60"x108", 30"x108", 60"x54", 30"x54". • 12.0mm, 15.2mm and 18.0mm Thick Panels: 60"x60". • Edges may need to be trimmed. • Some sheets may be slightly oversized. • See the chart below for the actual size of our Sheet Stock materials. Allow ⅛" per saw kerf. Available in customer specified widths x 8' long only (60" long for 12.0mm, 15.2mm & 18.0mm thick panels). • Edges may need to be trimmed. • Specified widths will not be oversized. • Some lengths may be slightly oversized. • Minimum width for wood veneer is ¾". • Minimum width for sheet stock ⅛" thick or greater is ¾". • See the chart below for the actual size of our Sheet Stock materials. • Allow ⅛" per saw kerf. Available in customer specified widths and lengths (any size piece that the sheet will yield). PCTS items will be square and the exact size ordered. • Pieces will not be oversized. • Edges will be a sawn edge, not a routed edge, and as such could have visible saw kerfs. • Precision Cut to Size sheet stock is 100% free from defect on the face of the part. • Finished sizes include cuts to both the width and the height. • Minimum width for wood veneer is ¾". • Minimum width for sheet stock ⅛" thick or greater is ¾". • See the chart below for the actual size of our Sheet Stock materials. • Allow ⅛" per saw kerf.

► For PRICING ► See Section K.1 in our current Wholesale Pricing Catalog. K.1.4

V16.3

®

®

.com

C

(Phone) 1-800-237-1326 6:00AM - 4:30PM CST (24 Hour Fax) 1-608-781-3667


Veneers, Plywood & MDF

Sheet Stock Options

Actual Size of Sheet Stock Material Class Non Adhesive * Pressure Sensitive Adhesive (PSA)

Plywood

MDF, Raw

Description Resin Back Wood Back Paper Back Paintable Laminate Wood Back Paper Back Paintable Laminate ⅛" Veneer Core

Actual Size of Sheet

⅛" MDF Core A4

96½" x 48½"

¼" MDF Core A1 ¼" MDF Core A4 ¼" Veneer Core ½" MDF Core A1 ½" Veneer Core ⅝" MDF Core A1 ⅝" Veneer Core ¾" MDF Core A1 ¾" Veneer Core

48½" x 96½" 48½" x 96½" 48½" x 96½" 48½" x 96½" 48½" x 96½" 48½" x 96½" 48½" x 96½" 48½" x 96½" 48½" x 96½"

MDF Material 7 /32 ", ¼", ⅜", ½", ⅝" 11/16", ¾", 1"

49" x 97"

⅞" MDF Material 7 /32 " MDF Material ⅛" High Density Fiberboard

HDF

48½" x 96½" 48½" x 96⅜" 49" x 97" 49" x 97" 48½" x 96⅜" 49" x 97" 49" x 97" 48½" x 96½"

• 2'x8' sheets are cut from 4'x8' sheets. We split the sheet equally in two halves to produce two slightly oversized 2x8’s.

• 4'x4' sheets are cut from 4'x8' * PSA (Peel & Stick) will cover the entire length of the sheet, but may not extend to sheets. We split the sheet the “edges” in width. equally in 2 halves to produce two slightly oversized 4x4’s. (This is only available with Plywood material and veneer.)

( Not used for oversized 2'x8', 4'x4' and 2'x4' panels.)

• 2'x4' sheets are cut from 4'x8' sheets. We split the sheet equally in 2 halves in both width and height to produce four slightly oversized 2x4’s. (This is only available with Plywood material & veneer .) • If you are ordering 2'x4', 4'x4', 2'x8' or 4'x8' sheets, you will be charged for that square footage but will receive slightly oversized panels. • The same rules apply as above when cutting the 5'x8' or 5'x9' panels in halves or quarters.

61" x 97" 61" x 109" 61" x 97"

(Standard) One-Sided (1S) Finish - Sheet Stock Products Non-Adhesive Non-Adhesive Non-Adhesive Non-Adhesive Resin Back Veneer Wood Back Veneer Paper Back Veneer Paintable Laminate .037" [0.9mm] .036" [0.9mm] .023" [0.6mm] .015" [0.4mm] Thick Thick Thick Thick +.008"/-.007"

⅛" HDF Material .125" [3.2mm] Thick +/- .015" (5'x8')

Drawer Box Bottom Material

(8'x4')

PSA Wood Back Veneer .036" [0.9mm] Thick

PSA Back Paintable Laminate .015" [0.4mm] Thick

⅛" Plywood Veneer Core, A4 .156" [4.0mm] Thick

⅛" Plywood MDF Core, A4 .165" [4.2mm] Thick +/- .010"

⅛" Plywood MDF Core, A4 .165" [4.2mm] Thick +/- .010"

(8'x4')

¼" Plywood MDF Core, A4 .220" [5.6mm] Thick +/- .005"

¼" Plywood MDF Core, A4 .220" [5.6mm] Thick +/- .005"

¼" Plywood MDF Core, A1 .220" [5.6mm] Thick +/- .005"

PSA Paper Back Veneer .023" [0.6mm] Thick

¼" Plywood Veneer Core A or B Face .198" [5.0mm] Thick +/- .012"

7 /32" MDF Material .219" [5.6mm] Thick +/- .015"

Various Grade Backs

(4'x8' or 5'x9')

¼" MDF Material .250" [6.4mm] Thick +/- .015"

⅜" MDF Material .375" [9.5mm] Thick +/- .015"

See Finish Options notes within this section for more information.

(Standard) Two-Sided (2S) Finish - Sheet Stock Products ½" Plywood MDF Core, A1 .500" [12.7mm] Thick +0"/-.015"

¹¹/16" Combi-Core Material .687" [17.4mm] Thick +/- .015"

½" Plywood Veneer Core, A1 .500" [12.7mm] Thick +0"/-x75"

¹¹/16" MDF Material .687" [17.4mm] Thick +/- .015"

½" MDF Material .500" [12.7mm] Thick +/- .015"

12.0mm Plywood Veneer Core .4724" Thick +.02"/-.03" (60"x60")

⅝" Plywood MDF Core, A1 .625" [15.9mm] Thick +0"/-.015"

18.0mm Plywood Veneer Core .709" Thick +.03"/-.04"

¾" Plywood MDF Core AA Face .750" [19.1mm] Thick +0"/-.015"

¾" Plywood MDF Core A or B Face .750" [19.1mm] Thick +0"/-.015"

(60"x60")

Door Grade

#1 Grade Back

⅝" Plywood Veneer Core, A1 .625" [15.9mm] Thick +0"/-.046875"

¾" Plywood Veneer Core, A1 .750" [19.1mm] Thick +0"/-.046875"

⅝" MDF Material .625" [15.9mm] Thick +/- .015"

¾" MDF Material .750" [19.1mm] Thick +/- .015"

15.2mm Plywood Veneer Core .598" Thick +.02"/-.03" (60"x60")

⅞" MDF Material .875" [22.2mm] Thick +/- .015"

1" MDF Material 1.00" [25.4mm] Thick +/- .015"

See Finish Options notes within this section for more information.

®

► For PRICING ► See Section K.1 in our current Wholesale Pricing Catalog. ®

.com

C

99.7% American Made

K.1.5

V16.3

K


Sheet Stock Options

Veneers, Plywood & MDF

Ordering & Pricing Notes: Veneer, Plywood & MDF 1 Order Forms

Ordering Guidelines Please use Sheet Goods Order Forms (E•Z Forms #8, #8.2) and part #185.

1 Pricing

Pricing Please see Section K.1 of our current Wholesale Pricing Catalog. Technical Notes: Veneer, Plywood & MDF

K

Cabinet Refacing Options (Chapter U) Sheet Stock options available for refacing with SolidTone® Finish/Color: • Non-Adhesive Resin Back Veneer and PSA (Peel & Stick) Wood Back Veneer • Non-Adhesive Back and PSA (Peel & Stick) Back Paintable Laminate • ⅛" HDF and 7/32 " & ¼" MDF Refacing with SolidTone® • ⅛" & ¼" Plywood (Veneer Core and MDF Core) 1 Finish/Color Note: PSA (Peel & Stick) Wood Back Veneer with a SolidTone® Finish/Color is only available in the following RCSS: 2'x8' [609.6mm x 2438.4mm], 2'x4' [609.6mm x 1219.2mm] and 24"x32" [609.6mm x 812.8mm]. Note: Non-Adhesive Back and PSA (Peel & Stick) Back Paintable Laminate with a SolidTone® Finish /Color is only available in the following RCSS: 4'x8' [1219.2mm x 2438.4mm], 2'x8' [609.6mm x 2438.4mm], 4'x4' [1219.2mm x 1219.2mm], 2'x4' [609.6mm x 1219.2mm], 24"x32" [609.6mm x 812.8mm]. Sheet Stock options available for refacing with SolidTone® WoodGrain Finish/Color: • Non-Adhesive Resin Back Veneer & PSA (Peel & Stick) Wood Back Veneer Refacing with SolidTone® • ⅛" and ¼" Plywood (Veneer Core and MDF Core) 2 WoodGrain Note: When applying a SolidTone® WoodGrain Finish/Color to PSA (Peel & Stick) Wood Back Veneer, Finish/Color the only RCSS that are available will be 2'x8' [609.6mm x 2438.4mm], 2'x4' [609.6mm x 1219.2mm] and 24"x32" [609.6mm x 812.8mm]. General Information (Chapter A) PM18 (U-Channel Box) will be WalzCraft's preferred method of packaging sheet stock ⅛" thick or greater, unless otherwise specified.

1 Shipping

1 One Sided (1S) Finishing

2 Two-Sided (2S) Finishing

1

Cutting Prefinished Veneers

2 Application Instructions

Finish Options (Chapter R) • Veneer and ⅛", 7/32", ¼" & ⅜" Plywood, HDF and MDF are only finished on the face of the panel (1S). • Minimal over spray onto the edges and back of product will be considered acceptable. • ½", ⅝", 11/16", ¾", ⅞" and 1" Plywood & MDF is finished on the face and back of the panel only (2S). • Minimal over spray onto the edges of the product will be considered acceptable. • A 2S finish for these products is recommended and is WalzCraft’s standard method as it helps to balance the product and minimize warpage. ◦ With thicker material it is more difficult to correct warpage during installation or a product's ability to lay flat when it is not properly balanced. •You may choose a 1S finish for these products, but minimal over spray onto the edges and back will be considered acceptable and there will be no warranty against warpage. ◦ If over spray is not acceptable, WalzCraft can mask the edges and back during the finishing process, but additional charges will apply. ◦ If a 1S finish is desired for these products, please indicate this, and whether or not over spray is acceptable, in the Special Instructions section of the order form. Miscellaneous When cutting prefinished wood veneers, WalzCraft recommends the use of some type of veneer saw, razor knife or trim router to produce a clean cut. We do not recommend the use of a laminate slitter on pre-finished wood veneers as this can sometimes leave a jagged edge. When choosing to use a laminate slitter, it is recommended that you cut the piece oversized, secure in place and then rout flush to produce a smooth, clean edge. Manufacturer’s guidelines for suggested application will be provided with each order. WalzCraft and its suppliers will warranty product, provided the material was properly installed. Sheet Stock Options (Chapter K) Please see Section L.1 - Basic Cabinet Box Components for edgebanding sheet stock parts. Notes Continued on Next Page...

1 Edgebanding

► For PRICING ► See Section K.1 in our current Wholesale Pricing Catalog. K.1.6

V16.3

®

®

.com

C

(Phone) 1-800-237-1326 6:00AM - 4:30PM CST (24 Hour Fax) 1-608-781-3667


Veneers, Plywood & MDF

Sheet Stock Options

Technical Notes: Veneer, Plywood & MDF...continued Sizes / Dimensions • 4'x8' panels are considered 95% “free from defect” on the face of the product. If you require panels to be 100% free from defect on the face, please order Precision Cut to Size (PCTS). • All materials originate from a 4'x8' sheet. Cut to Size includes cuts to both the width and height. PCTS items will be square and the exact size ordered. Pieces will not be oversized. Edges will be a sawn edge, not a routed edge, and as such could have visible saw kerfs. • Rip to Rough Width (RTRW) and Rough Cut to Stock Sizes (RCSS) would be 95% “free from defect” on the face, not 100% free. Both dimensions are not being cut to size. When Precision Cut to Size (PCTS) pieces of ⅛" or ¼" Plywood, MDF Core, A4 are ordered from 8' x 4' panels, widths must be over 48". Please order from a standard 4' x 8' sheet when widths are under 48".

1 4' x 8' Panels

2 8' x 4' Panels

Wood Specie Options (Chapter S) Birch, Cherry, Pine, Hard To minimize any color mismatch between veneer refacing materials and solid wood products for these wood spe1 cies, WalzCraft recommends using a “Spray No Wipe” stain process on the entire job, for a “blotch free ” finish. & Soft Maple Veneer Whole piece faces are made from veneer that has been rotary cut. A whole piece face veneer will not contain 2 Whole Piece Face (WPF) any splices. For some time WalzCraft has been asked by customers to supply a more “Rustic” looking Hickory-PS-Rustic veneer. WalzCraft has always found this request difficult to fulfill in Hickory because during the veneer slicing process some knots are loosened and either completely or partially fall out. Recently, WalzCraft became aware of a product that improves the appearance of sheets with missing knots. It does this by using a Dark Brown Paper Back (DBPB) on the veneer. 3

WalzCraft now offers Hickory-PS-Rustic in Paperback Non-Adhesive Veneer, and in Paperback PSA (Pressure Sensitive Adhesive) using the Dark Brown Paper Backing (DBPB). This backing color is close to the color of the knots that one normally finds in Rustic Hickory, and helps to make any portion of a knot that is missing appear to be approximately the same color as the remaining knot. When ordering Hickory-PS-Rustic in Paperback Non-Adhesive Veneer, and in Paperback PSA (Pressure Sensitive Adhesive), please note that it is considered normal to find knots of any size up to 1½" in diameter that may be completely missing, or partially missing. Many users consider this acceptable as the dark backer tends to still give the impression of a knot. Some users may consider the smaller missing knots acceptable, but will not use the portions of the sheet with larger knots. Some users will not find any missing knot acceptable; this material would be a poor choice for those customers. Provides a seamless, non-grain surface for painting, can easily be cut with a knife and is extremely flexible. Available with a 3M pressure sensitive adhesive (PSA) backing or with a non-adhesive backing perfect for nearly any gluing application.

Hickory - PS - Rustic Grade with a DBPB

4 Paintable Laminate

®

► For PRICING ► See Section K.1 in our current Wholesale Pricing Catalog. ®

.com

C

99.7% American Made

K.1.7

V16.3

K


Availability Charts

V16.3

K.1.8

®

Quarter Sawn Brown - PS PS

ANIGRE-MEDIUM FIGURE

®

.com

C

No Sap (Straight Grain)

RC

PS

No Sap - PS

PS

White - RC White - RC - WPF

Red - RC

Red - PS

Baltic - Plywood PS Calico / Mixed - RC RC RC - WPF

Steamed - PS

Caramelized

Blond

White - PS

PS

J ATO B A PS ** = See Wood Species Options note on previous page.

H I C K O RY

Calico / Mixed - PS

Brown - PS

PS PS Eucalyptus-Red Grandis PS FI R -DOUGLAS Rift Sawn (Straight Grain) HDF Raw

C Y PR E S S E L M -R E D

C HE R RY

BUTTERNUT

BIRCH

B E E C H -E U R O PE AN

BAMBOO

White - PS

RC

PS

ALDER

ASH

PS

Color/Grain

Sheet Stock Size

A FR O R M OS I A

Wood Species Natural / Standard Grade Select / Premium Grade Natural / Standard Grade Rustic Grade Select / Premium Grade Mill Grade Select / Premium Grade Natural / Standard Grade Natural / Standard Grade Select / Premium Grade Select / Premium Grade Flat Grain Vertical Grain Flat Grain Vertical Grain Natural / Standard Grade Select / Premium Grade Mill Grade Rustic Grade Select / Premium Natural / Standard Grade Natural / Standard Grade Natural / Standard Grade Select / Premium Grade Natural / Standard Grade Select / Premium Grade Select / Premium Grade Select / Premium Grade Natural / Standard Grade Select / Premium Grade Natural / Standard Grade Gummy Grade Natural / Standard Grade Rustic Grade Select / Premium Grade Ultra Rustic Grade Natural / Standard Grade Select / Premium Grade Natural / Standard Grade Select / Premium Grade Natural / Standard Grade Mill Grade Natural / Standard Grade Reconstituted Veneer Paint Grade Rustic Grade Select / Premium Grade Select / Premium Grade Natural / Standard Grade Rustic Grade Ultra Rustic Grade Rustic Grade Select / Premium Grade Mill Grade

Grade

(See Section K.1 - Product Spec. Catalog for Cut/Rip Size Descriptions)

R C S S = Rough Cut to Stock Sizes (Only) • Veneer - 4x8, 2x8, 4x4, 2x4, 24x32 RTRW = Ripped to Rough Width P C T S = Precision Cut to Size

X X

X

X

X

X X X

X

RCSS

.037" [0.9mm] Thick +.008"/-.007"

Resin Back Veneer

X X X X

X X X X

X X X X X

X X X

X X

X X

X X X

X X

X

X X X

X

X X X X X X

X X X X X X X X X X X X X X X X X

X X X X X X X X X X X X X X X X X

X X X X X X

RTRW

RCSS

X X

X X X

X X

X X X

X

X X X X X X

X X X

X

X X X X X X X X X X X X X X X X X

PCTS

.036" [0.9mm] Thick

Wood Back Veneer

RCSS

X X X**

X

X

X

X X X

X

X X X**

X

X

X

X X X

X

X

PCTS

X

RTRW

.023" [0.6mm] Thick

X X

X

X

X

X

X

X

X

RCSS

.036" [0.9mm] Thick

Wood Back Veneer

RTRW

PCTS

.015" [0.4mm] Thick

Paintable Laminate

RCSS

Pressure Sensitive Veneer

(3M PSA) “Peel & Stick” Paper Back Veneer

X

RCSS

.015" [0.4mm] Thick

Paintable Laminate

X

RCSS

.023" [0.6mm] Thick

Paper Back Veneer

Non-Adhesive Veneer

K

Part #185

Sheet Stock Options Veneers, Plywood & MDF

(Phone) 1-800-237-1326 6:00AM - 4:30PM CST (24 Hour Fax) 1-608-781-3667


Availability Charts

®

®

.com

C

99.7% American Made

PS

Calico / Mixed - PS PS White - PS

PS

Rift Sawn (Straight Grain)

Quarter Sawn

PS

Rift Sawn (Straight Grain)

Quarter Sawn

RC

PS

RC Raw Raw - MEDEX (NAUF)

PS

(Straight Grain)

RC

PS

Calico / Mixed - PS

Curly - PS

Birds Eye - PS

Quarter Sawn

Quarter Sawn

X X

X

X X

X

X

X

X X

X

X

X X

X

X

X X

X X X X X X X X X X X X

X X X X X X X X X X X X X X

X

X

X X X X X

X X X X X X X X X X X X

X

RTRW

X

X

X X X X X

X X X X X X X X X X X X

Natural / Standard Grade Select / Premium Grade Natural / Standard Grade Select / Premium Grade Natural / Standard Grade Select / Premium Grade Natural / Standard Grade Select / Premium Grade Natural / Standard Grade Select / Premium Grade Select / Premium Grade Natural / Standard Grade Rustic Grade Select / Premium Grade Natural / Standard Grade Select / Premium Grade Natural / Standard Grade Select / Premium Grade Natural / Standard Grade Wormy Grade Natural / Standard Grade Paint Grade Paint Grade Natural / Standard Grade Rustic Grade Select / Premium Grade Ultra Rustic Grade Natural / Standard Grade Select / Premium Grade Natural / Standard Grade Select / Premium Grade Natural / Standard Grade Select / Premium Grade Natural / Standard Grade Select / Premium Grade Natural / Standard Grade Select / Premium Grade Natural / Standard Grade Select / Premium Grade Paint Grade Knotty Grade Natural / Standard Grade Select / Premium Grade Natural / Standard Grade Select / Premium Grade Natural / Standard Grade Rustic Grade Select / Premium Grade Natural / Standard Grade

PS

X

Budget Grade

RCSS

Natural / Standard Grade

X

RCSS

X X

X

X

X X

X X X X X X X X X X X X

X

X

X X X X X

X X X X X X X X X X X X

X

PCTS

.036" [0.9mm] Thick

Wood Back Veneer

PS

Grade

.037" [0.9mm] Thick +.008"/-.007"

Resin Back Veneer

X X

X

X X

X X

X

X

X

X

RTRW

X

RCSS

X

X

PCTS

.015" [0.4mm] Thick

Paintable Laminate .023" [0.6mm] Thick

X X

X X

X X X X X X

X X

X

X

X

X

X

X

X

X

X X

X

X

X X

RCSS

RCSS

.036" [0.9mm] Thick

Wood Back Veneer

X

X

RTRW

X

PCTS

.015" [0.4mm] Thick

Paintable Laminate

RCSS

Pressure Sensitive Veneer

(3M PSA) “Peel & Stick” Paper Back Veneer

P le a s e s e e Se c t i o n K. 2 . P le a s e c a ll f o r quo t e a n d a v a i l a b i l i ty.

RCSS

.023" [0.6mm] Thick

Paper Back Veneer

Non-Adhesive Veneer

RC

Color/Grain

Sheet Stock Size

No Sap - PS A rc h i te c tu r al G r ad e Ve ne e r s A l l O th e r Wo od S pe c i e s

WA L N U T

P OP L A R

PA I NTA B L E L A M I N AT E PI NE -N O RT H E R N W HI T E

O A K- WH I T E

O A K- R E D

MDF

M A P L E - S OF T

M A PL E - H A R D

M A H O GA N Y - S A PE L E

M A HO G A N Y-S I PO (K H AYA )

MAHOGANY MAHOGANY-GENUINE (KHAYA)

Wood Species

(See Section K.1 - Product Spec. Catalog for Cut/Rip Size Descriptions)

R C S S = Rough Cut to Stock Sizes (Only) • Veneer - 4x8, 2x8, 4x4, 2x4, 24x32 RTRW = Ripped to Rough Width P C T S = Precision Cut to Size

Part #185

Veneers, Plywood & MDF Sheet Stock Options

K.1.9

V16.3

K


V16.3

K.1.10

®

Quarter Sawn Brown - PS PS

ANIGRE-MEDIUM FIGURE

®

.com

C

No Sap (Straight Grain)

RC

PS

No Sap - PS

PS

White - RC White - RC - WPF

Red - RC

Red - PS

Baltic - Plywood PS Calico / Mixed - RC RC RC - WPF

Steamed - PS

Caramelized

Blond

J ATOB A

H I C K O RY

PS

White - PS

PS

Calico / Mixed - PS

Brown - PS

PS Red - PS eucalyptus-red grandis PS FI R -douglas (Straight Grain) HDF Raw

C Y PR E S S E L M - red

C H E R RY

BUTTERNUT

BIRCH

B E E C H -E U RO PE A N

BAMBOO

White - PS

RC

PS

ALDER

Color/Grain

Sheet Stock Size

PS

Wood Species

Select / Premium Grade Select / Premium Grade Flat Grain Vertical Grain Flat Grain Vertical Grain Natural / Standard Grade Select / Premium Grade Mill Grade Rustic Grade Select / Premium Grade Natural / Standard Grade Natural / Standard Grade Natural / Standard Grade Select / Premium Grade Natural / Standard Grade Select / Premium Grade Select / Premium Grade Select / Premium Grade Natural / Standard Grade Select / Premium Grade Natural / Standard Grade Gummy Grade Natural / Standard Grade Rustic Grade Select / Premium Grade Ultra Rustic Grade Natural / Standard Grade Select / Premium Grade Natural / Standard Grade Select / Premium Grade Natural / Standard Grade Mill Grade Natural / Standard Grade Reconstituted Veneer Paint Grade Rustic Grade Select / Premium Grade Select Grade Natural / Standard Grade Rustic Grade Ultra Rustic Grade Rustic Grade Select / Premium Grade Mill Grade

Natural / Standard Grade Select / Premium Grade Natural / Standard Grade Rustic Grade Select / Premium Grade Mill Grade Select / Premium Grade Natural / Standard Grade Natural / Standard Grade

Grade

(See Section K.1 - Product Spec. Catalog for Cut/Rip Size Descriptions)

AFRORMOSIA

A SH

Availability Charts

R C S S = Rough Cut to Stock Sizes (Only) • ⅛", ¼" Plywood - 4x8, 2x8, 4x4, 2x4, 24x32 • ⅛" HDF - 60x96, 30x96,60x48, 30x48 RTRW = Ripped to Rough Width P C T S = Precision Cut to Size

X X X

X X X

X

X

X X

X

X

X

X

X

X

X

X

X X X

X

X

X

X

X

X

X X

X X X

X

X

X

X

X X

X X X

X

X

X

X

X X

X X X

X

X

X

X

RCSS RTRW PCTS

.165" [4.2mm] Thick +/- .010"

.156" [4.0mm] Thick

RCSS RTRW PCTS

⅛" Plywood MDF Core, A4

⅛" Plywood Veneer Core, A4

X X

X

X

X

X

8x4 Only RCSS

X X

X

X

X

X

PCTS

(8'x4')

Thick +/- .010"

.165" [4.2mm]

⅛" Plywood MDF Core, A4

X

X

X

RCSS RTRW PCTS

(5'x8')

.125" [3.2mm] Thick +/- .015"

⅛" HDF Material

K

Part #185

X X

X X

X X

X

X

X X

X

X

X

X

X X

X

X

X

X

X

X X

X

X X

X

X

X X

X

X

X X

X X

X

X

X

X

X

X X

X

X X

X

X

RCSS RTRW PCTS

.220" [5.6mm] Thick +/- .005"

¼" Plywood MDF Core, A1

X X

X

X

X

X

X

X

X X

X

X

X

X

X

X

X X

X

X

X

X

X

X

RCSS RTRW PCTS

X X

X

X

X

X

X X

X

X

X

X

PCTS

(8'x4')

Drawer Box Bottom Material

8x4 Only RCSS

.220" [5.6mm] Thick +/- .005"

¼" Plywood MDF Core, A4

.220" [5.6mm] Thick +/- .005"

¼" Plywood MDF Core, A4

X X X

X

X

X

X

X

X X X

X

X

X

X

X

X X X

X

X

X

X

X

RCSS RTRW PCTS

Various Grade Backs

.198" [5.0mm] Thick +/- .012"

¼" Plywood Veneer Core A or B Face

Sheet Stock Options Veneers, Plywood & MDF

(Phone) 1-800-237-1326 6:00AM - 4:30PM CST (24 Hour Fax) 1-608-781-3667


®

®

.com

C

Wood Species

M A PL E -S O FT

M A PL E - H AR D

M A H O GA N Y- SA P E L E

M A HO G A N Y-S I PO (K H AYA )

99.7% American Made

A l l O th e r Wo o d S pe c i e s

WA L N U T

P OP L A R

PA I N TA B L E L A MI N AT E P I N E -N O RT H E R N WHITE

O A K -W H I T E

O A K- R E D

No Sap - PS

PS

Calico / Mixed - PS PS White - PS

PS

Rift Sawn (Straight Grain)

Quarter Sawn

PS

Rift Sawn (Straight Grain)

Quarter Sawn

RC

PS

RC Raw Raw - MEDEX (NAUF)

PS

(Straight Grain)

RC

PS

Calico / Mixed - PS

Curly - PS

Birds Eye - PS

Quarter Sawn

Quarter Sawn

Natural / Standard Grade Select / Premium Grade Natural / Standard Grade Select / Premium Grade Natural / Standard Grade Select / Premium Grade Natural / Standard Grade Select / Premium Grade Natural / Standard Grade Select / Premium Grade Select / Premium Grade Natural / Standard Grade Rustic Grade Select / Premium Grade Natural / Standard Grade Select / Premium Grade Natural / Standard Grade Select / Premium Grade Natural / Standard Grade Wormy Grade Natural / Standard Grade Paint Grade Paint Grade Natural / Standard Grade Rustic Grade Select / Premium Grade Ultra Rustic Grade Natural / Standard Grade Select / Premium Grade Natural / Standard Grade Select / Premium Grade Natural / Standard Grade Select / Premium Grade Natural / Standard Grade Select / Premium Grade Natural / Standard Grade Select / Premium Grade Natural / Standard Grade Select / Premium Grade Paint Grade Knotty Grade Natural / Standard Grade Select / Premium Grade Natural / Standard Grade Select / Premium Grade Natural / Standard Grade Rustic Grade Select / Premium Grade Natural / Standard Grade

Natural / Standard Grade

PS

Budget Grade

PS

Grade

RC

Color/Grain

Sheet Stock Size

(See Section K.1 - Product Spec. Catalog for Cut/Rip Size Descriptions)

M A H O GA N Y M A HO G A N Y-G E NU I NE (K H AYA )

MDF

Availability Charts

R C S S = Rough Cut to Stock Sizes (Only) • ⅛", ¼" Plywood - 4x8, 2x8, 4x4, 2x4, 24x32 • ⅛" HDF - 60x96, 30x96,60x48, 30x48 RTRW = Ripped to Rough Width P C T S = Precision Cut to Size

Part #185

X X

X X

X

X X

X X

X

X X X

X X

X X

X X X

X

X X

X

X X

X X

X

X X

X X X

X X

X

X X

X X

X

X

X X X

X

X X

X

X

X X X

X

X X

X

X

X X X

X

RCSS RTRW PCTS

.165" [4.2mm] Thick +/- .010"

.156" [4.0mm] Thick

RCSS RTRW PCTS

⅛" Plywood MDF Core, A4

⅛" Plywood Veneer Core, A4

X X

X X

8x4 Only RCSS

X X

X X

PCTS

(8'x4')

Thick +/- .010"

.165" [4.2mm]

⅛" Plywood MDF Core, A4

X X X X

X X X X X X X X X X X X X X X X X X X

X X X X

X X X X X X X X X X X X X X X X X X X

X

X X X X

X X X X X X X X X X X X

X

X

X X X

X

X X

X X X X X X P le a s e c a ll f o r quote a n d a v a i l a b i l i ty.

X X

X X

X X

X X

X

X X

X X

X

X X

X X

X

RCSS RTRW PCTS

X X

X X

RCSS

X X

X X

PCTS

RCSS RTRW PCTS

(5'x8') RCSS RTRW PCTS

(8'x4')

Drawer Box Bottom Material 8x4 Only

.220" [5.6mm] Thick +/- .005"

.220" [5.6mm] Thick +/- .005"

.220" [5.6mm] Thick +/- .005"

.125" [3.2mm] Thick +/- .015"

¼" Plywood MDF Core, A4

¼" Plywood MDF Core, A4

¼" Plywood MDF Core, A1

⅛" HDF Material

X

X

X

X

X

X

X

X

X

X

X

X

RCSS RTRW PCTS

Various Grade Backs

.198" [5.0mm] Thick +/- .012"

¼" Plywood Veneer Core A or B Face

Veneers, Plywood & MDF Sheet Stock Options

K.1.11

V16.3

K


Availability Charts

V16.3

K.1.12

®

Quarter Sawn Brown - PS PS

ANIGRE-MEDIUM FIGURE

®

.com

C

J ATOB A

H I C K ORY

FI R -DOUGLAS HDF

EUCALYPTUS-RED GRANDIS

C Y PR E SS E L M -R E D

CH E RRY

BUTTERNUT

BIRCH

BEECH

BAMBOO

PS

White - PS

PS

Calico / Mixed - PS

Brown - PS

PS PS PS (Straight Grain) Raw

No Sap (Straight Grain)

RC

PS

No Sap - PS

PS

White - RC White - RC - WPF

Red - RC

Red - PS

Baltic - Plywood PS Calico / Mixed - RC RC RC - WPF

European Steamed - PS

Caramelized

Blond

White - PS

RC

PS

ALDER

A SH

PS

Color/Grain

Sheet Stock Size

AFRORMOSIA

Wood Species Natural / Standard Grade Select / Premium Grade Natural / Standard Grade Rustic Grade Select / Premium Grade Mill Grade Select / Premium Grade Natural / Standard Grade Natural / Standard Grade Select / Premium Grade Select / Premium Grade Flat Grain Vertical Grain Flat Grain Vertical Grain Natural / Standard Grade Select / Premium Grade Mill Grade Rustic Grade Select / Premium Natural / Standard Grade Natural / Standard Grade Natural / Standard Grade Select / Premium Grade Natural / Standard Grade Select / Premium Grade Select / Premium Grade Select / Premium Grade Natural / Standard Grade Select / Premium Grade Natural / Standard Grade Gummy Grade Natural / Standard Grade Rustic Grade Select / Premium Grade Ultra Rustic Grade Natural / Standard Grade Select / Premium Grade Natural / Standard Grade Select / Premium Grade Natural / Standard Grade Mill Grade Natural / Standard Grade Reconstituted Veneer Paint Grade Rustic Grade Select / Premium Grade Select / Premium Natural / Standard Grade Rustic Grade Ultra Rustic Grade Rustic Grade Select / Premium Grade Mill Grade

Grade

R C S S = Rough Cut to Stock Sizes (Only) • ½" Plywood - 4x8, 2x8, 4x4, 2x4, 24x32 • 7/32" MDF - 60x108, 30x108, 60x54, 30x54 • 7/32", ¼", ⅜", ½" MDF - 4x8, 2x8, 4x4, 2x4, 24x32 RTRW = Ripped to Rough Width P C T S = Precision Cut to Size RCSS

RTRW

PCTS

(4' x 8' or 5'x9')

RCSS

RTRW

PCTS

.250" [6.4mm] Thick +/- .015"

.219" [5.6mm] Thick +/- .015"

¼"

MDF Material

7/32"

MDF Material

RCSS

RTRW

PCTS

.375" [9.5mm] Thick +/- .015"

⅜"

MDF Material

K

Part #185

X

X

X X

X

X

X X

X

X

X

X

X

RTRW

X

RCSS

+0"/-.015"

X X

X

X

X

X

X

PCTS

.500" [12.7mm]Thick

½"

Plywood MDF Core, A1

X

X

X

RCSS

X

X

X

RTRW

+0"/-.046875"

X

X

X

PCTS

.500" [12.7mm] Thick

½"

Plywood Veneer Core, A1

RCSS

RTRW

+/- .015"

PCTS

.500" [12.7mm] Thick

½"

MDF Material

Sheet Stock Options Veneers, Plywood & MDF

(Phone) 1-800-237-1326 6:00AM - 4:30PM CST (24 Hour Fax) 1-608-781-3667


®

®

.com

C

M A H O GA N Y-S A PE L E

M A HO G A NY-S I P O (K HAYA )

M A H OG A N Y M A HO G A N Y-G E N U I N E (K H AYA)

Wood Species

99.7% American Made

Al l Ot he r Woo d S p e c i es

WAL N U T

PO PL AR

PA I N TA B L E L A MI NAT E PI N E -N O RT H E R N WHITE

O A K- WH I T E

O AK -R E D

MDF

M A P L E -S O FT

M A PL E -H A R D

Availability Charts

No Sap - PS

PS

Calico / Mixed - PS PS White - PS

PS

Rift Sawn (Straight Grain)

Quarter Sawn

PS

Rift Sawn (Straight Grain)

Quarter Sawn

RC

PS

RC Raw Raw - MEDEX (NAUF)

PS

(Straight Grain)

RC

PS

Calico / Mixed - PS

Curly - PS

Birds Eye - PS

Quarter Sawn

Quarter Sawn

PS

Natural / Standard Grade Natural / Standard Grade Select / Premium Grade Natural / Standard Grade Select / Premium Grade Natural / Standard Grade Select / Premium Grade Natural / Standard Grade Select / Premium Grade Natural / Standard Grade Select / Premium Grade Select / Premium Grade Natural / Standard Grade Rustic Grade Select / Premium Grade Natural / Standard Grade Select / Premium Grade Natural / Standard Grade Select / Premium Grade Natural / Standard Grade Wormy Grade Natural / Standard Grade Paint Grade Paint Grade Natural / Standard Grade Rustic Grade Select / Premium Grade Ultra Rustic Grade Natural / Standard Grade Select / Premium Grade Natural / Standard Grade Select / Premium Grade Natural / Standard Grade Select / Premium Grade Natural / Standard Grade Select / Premium Grade Natural / Standard Grade Select / Premium Grade Natural / Standard Grade Select / Premium Grade Paint Grade Knotty Grade Natural / Standard Grade Select / Premium Grade Natural / Standard Grade Select / Premium Grade Natural / Standard Grade Rustic Grade Select / Premium Grade Natural / Standard Grade

Budget Grade

PS

Grade

RC

Color/Grain

Sheet Stock Size

R C S S = Rough Cut to Stock Sizes (Only) • ½" Plywood - 4x8, 2x8, 4x4, 2x4, 24x32 • 7/32" MDF - 60x108, 30x108, 60x54, 30x54 • 7/32", ¼", ⅜", ½" MDF - 4x8, 2x8, 4x4, 2x4, 24x32 RTRW = Ripped to Rough Width P C T S = Precision Cut to Size

Part #185

X

RTRW

(4'x8' or 5'x9')

X

PCTS

.219" [5.6mm] Thick +/- .015"

RCSS

X

/"

7 32

MDF Material

X

RCSS

X

RTRW

X

PCTS

.250" [6.4mm] Thick +/- .015"

¼"

MDF Material

X X

X X

RTRW

X X

PCTS

X X

X X

X X

X X

X X

X X

RTRW

RCSS

+0"/-.015"

X X

X X

X X

PCTS

.500" [12.7mm]Thick

½"

Plywood MDF Core, A1

P le a s e c a ll f o r quo t e a n d a v a i l a b i l i ty.

RCSS

.375" [9.5mm] Thick +/- .015"

⅜"

MDF Material

X X

X X

RCSS

X X

X X

RTRW

+0"/-.046875"

X X

X X

PCTS

.500" [12.7mm] Thick

½"

Plywood Veneer Core, A1

X

RCSS

X

RTRW

+/- .015"

X

PCTS

.500" [12.7mm] Thick

½"

MDF Material

Veneers, Plywood & MDF Sheet Stock Options

K.1.13

V16.3

K


Availability Charts

V16.3

K.1.14

®

PS

Color/Grain

Sheet Stock Size Grade

AFRORMOSIA

Natural / Standard Grade Select / Premium Grade Natural / Standard Grade AL DE R PS Rustic Grade Select / Premium Grade ANIGRE-MEDIUM FIGURE Quarter Sawn Mill Grade Brown - PS Select / Premium Grade PS Natural / Standard Grade ASH Natural / Standard Grade RC Select / Premium Grade White - PS Select / Premium Grade Flat Grain Blond Vertical Grain BAMBOO Flat Grain Caramelized Vertical Grain Natural / Standard Grade B E E C H- E U R O PE A N Steamed - PS Select / Premium Grade Baltic - Plywood Mill Grade PS Rustic Grade Calico / Mixed - RC Select / Premium Grade RC Natural / Standard Grade RC - WPF Natural / Standard Grade BIRCH Natural / Standard Grade Red - PS Select / Premium Grade Natural / Standard Grade Red - RC Select / Premium Grade White - RC Select / Premium Grade White - RC - WPF Select / Premium Grade Natural / Standard Grade BUTTERNUT PS Select / Premium Grade No Sap - PS Natural / Standard Grade Gummy Grade Natural / Standard Grade PS Rustic Grade Select / Premium Grade C HE RRY Ultra Rustic Grade Natural / Standard Grade RC Select / Premium Grade Natural / Standard Grade No Sap (Straight Grain) Select / Premium Grade C Y PR E S S PS Natural / Standard Grade E L M- R E D PS Mill Grade EUCALYPTUS-RED GRANDIS PS Natural / Standard Grade FI R -DOUGLAS (Straight Grain) Reconstituted Veneer HDF Raw Paint Grade Rustic Grade Brown - PS Select / Premium Grade Calico / Mixed - PS Select / Premium Grade Natural / Standard Grade H I C K O RY PS Rustic Grade Ultra Rustic Grade Rustic Grade White - PS Select / Premium Grade J ATO B A PS Mill Grade

Wood Species

R C S S = Rough Cut to Stock Sizes (Only) • 12.0mm, 15.2mm, 18.0mm Plywood - 60x60 • ⅝", ¹¹/16" MDF, ¹¹/16" Combi-core - 4x8, 2x8, 4x4, 2x4, 24x32 • ⅝" Plywood - 4x8, 2x8, 4x4, 2x4, 24x32 RTRW = Ripped to Rough Width P C T S = Precision Cut to Size

X

X

X

RCSS RTRW PCTS

(60"x60")

+.02"/-.03"

.472" Thick

Plywood Veneer Core

12.0mm

®

.com

C X X X

X X X

X

X

X

RCSS RTRW PCTS

+0"/-.015"

.625" [15.9mm]Thick

⅝"

Plywood MDF Core, A1

RCSS RTRW PCTS

+0"/-.046875"

.625" [15.9mm] Thick

Plywood Veneer Core, A1

⅝"

RCSS RTRW PCTS

.625" [15.9mm] Thick +/- .015"

MDF Material

⅝"

K

Part #185

X

X

X

RCSS RTRW PCTS

(60"x60")

+.02"/-.03"

.598" Thick

Plywood Veneer Core

15.2mm

RCSS RTRW PCTS

.687" [17.4mm] Thick +/- .015"

¹¹/16"

Combi-Core Material

RCSS RTRW PCTS

.687" [17.4mm] Thick +/- .015"

¹¹/16"

MDF Material

X

X

X

RCSS RTRW PCTS

(60"x60")

+.03"/-.04"

.709" Thick

Plywood Veneer Core

18.0mm

Sheet Stock Options Veneers, Plywood & MDF

(Phone) 1-800-237-1326 6:00AM - 4:30PM CST (24 Hour Fax) 1-608-781-3667


Availability Charts

®

Color/Grain Natural / Standard Grade

Budget Grade

Grade

®

MAHOGANY-SIPO (KHAYA)

PS

Natural / Standard Grade Select / Premium Grade Natural / Standard Grade Quarter Sawn Select / Premium Grade Natural / Standard Grade MAHOGANY-SAPELE Quarter Sawn (KHAYA) Select / Premium Grade Natural / Standard Grade Birds Eye - PS Select / Premium Grade Natural / Standard Grade Curly - PS Select / Premium Grade Calico / Mixed - PS Select / Premium Grade Natural / Standard Grade M A PL E -H A R D PS Rustic Grade Select / Premium Grade Natural / Standard Grade RC Select / Premium Grade Natural / Standard Grade (Straight Grain) Select / Premium Grade Natural / Standard Grade PS M A PL E -S O FT Wormy Grade RC Natural / Standard Grade Raw Paint Grade MDF Raw - MEDEX (NAUF) Paint Grade Natural / Standard Grade Rustic Grade PS Select / Premium Grade Ultra Rustic Grade Natural / Standard Grade OA K -R E D RC Select / Premium Grade Natural / Standard Grade Quarter Sawn Select / Premium Grade Natural / Standard Grade Rift Sawn (Straight Grain) Select / Premium Grade Natural / Standard Grade PS Select / Premium Grade Natural / Standard Grade OA K -W H I T E Quarter Sawn Select / Premium Grade Natural / Standard Grade Rift Sawn (Straight Grain) Select / Premium Grade PAINTABLE LAMINATE Paint Grade Knotty Grade PI N E - NO RT H E R N PS WH I T E Natural / Standard Grade Calico / Mixed - PS Select / Premium Grade POP L A R PS Natural / Standard Grade White - PS Select / Premium Grade Natural / Standard Grade PS Rustic Grade WA L NU T Select / Premium Grade No Sap - PS Natural / Standard Grade Al l Ot he r Woo d S p e c i es

M A H O GA N Y RC MAHOGANY-GENUINE PS (KHAYA)

Wood Species

Sheet Stock Size

R C S S = Rough Cut to Stock Sizes (Only) • 12.0mm, 15.2mm, 18.0mm Plywood - 60x60 • ⅝", ¹¹/16" MDF, ¹¹/16" Combi-core - 4x8, 2x8, 4x4, 2x4, 24x32 • ⅝" Plywood - 4x8, 2x8, 4x4, 2x4, 24x32 RTRW = Ripped to Rough Width P C T S = Precision Cut to Size

Part #185

RCSS RTRW PCTS

(60"x60")

+.02"/-.03"

.472" Thick

Plywood Veneer Core

12.0mm

X X

X X

X X

RCSS RTRW PCTS

+0"/-.015"

.625" [15.9mm]Thick

⅝"

Plywood MDF Core, A1

RCSS RTRW PCTS

+0"/-.046875"

.625" [15.9mm] Thick

⅝"

Plywood Veneer Core, A1

.com

C

99.7% American Made

X

X

RCSS RTRW PCTS

(60"x60")

+.02"/-.03"

.598" Thick

Plywood Veneer Core

15.2mm

P le a s e c a ll f o r quo t e a nd a v a i l a b i l i ty.

X

RCSS RTRW PCTS

.625" [15.9mm] Thick +/- .015"

⅝"

MDF Material

X

RCSS

X

X

RTRW PCTS

.687" [17.4mm] Thick +/- .015"

¹¹/16"

Combi-Core Material

X

X

X

RCSS RTRW PCTS

.687" [17.4mm] Thick +/- .015"

¹¹/16"

MDF Material

RCSS RTRW PCTS

(60"x60")

+.03"/-.04"

.709" Thick

Plywood Veneer Core

18.0mm

Veneers, Plywood & MDF Sheet Stock Options

K.1.15

V16.3

K

K.1 - Veneer, Plywood and MDF for Cabinet Makers and Cabinet Refacing  

Veneer, Plywood and MDF for Cabinet Makers and Cabinet Refacing

K.1 - Veneer, Plywood and MDF for Cabinet Makers and Cabinet Refacing  

Veneer, Plywood and MDF for Cabinet Makers and Cabinet Refacing