Page 1

This page is intentionally left blank.


Drawer Slides by SALICE

Hardware Options

Futura Soft Close Undermount Drawer Slides - A7555

• Front locking clips required for drawer slides to function (sold separately). • Rear mounting brackets optional depending on chosen installation method (sold separately).

Sold Separately

I

Futura Soft Close Undermount Drawer Slides Length

Extension

Closing Type

Max. Cabinet Depth - Inside

Min. Cabinet Depth - Inside

12" [305.0mm]

Full

Smove Soft Close

14⅜" [365.1mm]

1213/16" [325.4mm]

15" [381.0mm]

Full

Smove Soft Close

177/16" [442.9mm]

15⅞" [403.2mm]

18" [457.0mm]

Full

Smove Soft Close

20⅜" [517.5mm]

18⅞" [479.4mm]

21" [533.0mm]

Full

Smove Soft Close

23⅜" [593.7mm]

21⅞" [555.6mm]

WCI Item #

Salice Item #

165427 166764 160720 160721

A7555/305CP6 A7555/381CP6 A7555/457CP6 A7555/533CP6

Additional lengths available - 9" (229mm). Please contact our Customer Support Team for more information.

Front Locking Clips & Rear Mounting Brackets for Futura Drawer Slides Description

WCI Item #

Salice Item #

Front Locking Clips - Left & Right (pair). Also available installed; for this option see Front Locking Clips - Optional Installation Notes.

160722 170367 181004 181005

A710.610

Front Locking Clips - Left & Right (pair). Also available installed; for this option see Front Locking Clips - Optional Installation Notes. Rear Mounting Bracket (Socket) - Regular - 2" [50.8mm] wide, metal (pair)* Rear Mounting Bracket (Socket) - Narrow - 17/16" [36.5mm] wide, metal (pair)*

A750.010 AGSKXC5 AGSKXR5

* When mounting the brackets (used to support the drawer slides) to the cabinet back, the different width brackets provide flexibility when encountering different cabinet side thicknesses and the proximity of the cabinet side to the inside opening of face frame.

A7555 with Front Clips & Rear Brakets (Sold Separately)

Front Locking Clips (pair) - A710.610

Front Locking Clips (pair) - A750.010

NHH1 - Drawer Box Notching

Rear Mounting Bracket - Regular AGSKXC5

Rear Mounting Bracket - Narrow AGSKXR5

► For PRICING ► See Section I.1 in our Wholesale Pricing Catalog.

I.2.1

V16.1

®

®

.com

C

(Phone) 1-800-237-1326 6:00AM - 4:30PM CST (24 Hour Fax) 1-608-781-3667


Drawer Slides by SALICE

Hardware Options

Ordering & Pricing Notes: Futura Soft Close Undermount Drawer Slides 1 Order Forms

Ordering Guidelines Please use Hardware Order Form (E•Z Form #13).

1 Pricing

Pricing Please see Section I.1 of the Wholesale Pricing Catalog. Technical Notes: Futura Soft Close Undermount Drawer Slides

6 Technical Information

Hardware Options (Chapter I) Smove soft close fully integrated in the runner. 75# Dynamic / 100# Static. Front locking clips and rear mounting brackets must be ordered separately. Salice Undermount Drawer Slides are only compatible with Salice Front Locking Clips. Height adjustment (+3mm) with A710.610 Front Locking Clips. Compatible with all Futura slides. Drawer height (+2.5mm), depth (+/-2.0mm) and side (+/-1.5mm) adjustment with A750.010 Front Locking Clips. Compatible with 2012 or later Futura slides. Screws needed to attach drawer slides to cabinet are sold separately. • Eight #6 x ⅝ FHP wood screws required per pair (see Section I.3). Screws needed to attach front locking clips to drawer box are sold separately. • Four #6 x ⅝ FHP wood screws required per pair (see Section I.3). Screws needed to attach rear mounting brackets to cabinet are sold separately. • Two #6 x ⅝ FHP wood screws required per bracket (see Section I.3). Please see www.saliceamerica.com for additional information and technical specifications.

1 Bottom Panel Inset 2 Drawer Box Notching

Drawer Box Options (Chapter H) A 13mm bottom panel inset is required. Requires drawer box notching option NHH1.

1 Full Extension 2 Load Capacity 3 4

Locking Clips and Mounting Brackets Adjustability

(With Front Locking Clips)

5 Screws Sold Separately

Sizes / Dimensions Compatible with ½" [12.7mm] and ⅝" [15.9mm] drawer box side wall thicknesses only. Minimum inside drawer width of 8" [203.2mm] when using either version of front locking clips. Drawer box depth must match the slide length. ie: 12" [305.0mm], 15" [381.0mm], 18" [457.0mm], 21" [533.0mm].

1 Side Thickness 2 Minimum Width 3 Drawer Box Depth

Front Locking Clips - Optional Installation The Salice Front Locking Clips (A710.610 or A750.010) required for the Futura Soft Close and Futura Push 1 Installation Undermount Drawer Slides can also be installed by Walzcraft. The drawer box must have a 13mm bottom panel inset and also include the NHH1 Notch & Hook Hole Combination. Available with assembled melamine and pre-finished wood drawer boxes only. Not available with RTA 2 Availability (Ready to Assemble) drawer boxes. Salice Undermount Drawer Slides are only compatible with Salice Front Locking Clips. If ordering Blum Drawer Slide Locking Devices (Release Clips) from Section I.9, you will need to order Blum Drawer Slides separately. Front locking clips (release clips) vary by manufacturer. WalzCraft can provide and install other brands Other Front Locking Clips 3 upon request. (Release Clips) The following information is required when ordering front locking clips (release clips) that are not inventoried by WalzCraft: • Brand and Model # of the drawer slide being used. • Manufacturer’s Part # of the Front Locking Clips (Release Clips), if available.

®

► For PRICING ► See Section I.1 in our Wholesale Pricing Catalog. ®

.com

C

99.7% American Made

I.2.2

V16.1

I


Drawer Slides by SALICE

Hardware Options

Futura “Push” Undermount Drawer Slides - A7557

• Front locking clips required for drawer slides to function (sold separately). • Rear mounting brackets optional depending on chosen installation method (sold separately).

Sold Separately

I

Futura “Push” Undermount Drawer Slides Length

Extension

Closing Type

Max. Cabinet Depth - Inside

Min. Cabinet Depth - Inside

WCI Item #

Salice Item #

21" [533.0mm]

Full

Push

23⅜" [593.7mm]

21⅞" [555.6mm]

165444

A7557/533CP6

Additional lengths available - 12" (305mm), 15" (381mm), 18" (457mm). Please submit requests to our Customer Support Team.

Front Locking Clips & Rear Mounting Brackets for Futura Drawer Slides Description

WCI Item #

Salice Item #

Front Locking Clips - Left & Right (pair). Also available installed; for this option see Front Locking Clips - Optional Installation Notes.

160722 170367 181004 181005

A710.610

Front Locking Clips - Left & Right (pair). Also available installed; for this option see Front Locking Clips - Optional Installation Notes. Rear Mounting Bracket (Socket) - Regular - 2" [50.8mm] wide, metal (pair)* Rear Mounting Bracket (Socket) - Narrow - 17/16" [36.5mm] wide, metal (pair)*

A750.010 AGSKXC5 AGSKXR5

* When mounting the brackets (used to support the drawer slides) to the cabinet back, the different width brackets provide flexibility when encountering different cabinet side thicknesses and the proximity of the cabinet side to the inside opening of face frame.

A7557 with Front Clips & Rear Brakets (Sold Separately)

Front Locking Clips (pair) - A710.610

Front Locking Clips (pair) - A750.010

NHH1 - Drawer Box Notching

Rear Mounting Bracket - Regular AGSKXC5

Rear Mounting Bracket - Narrow AGSKXR5

► For PRICING ► See Section I.1 in our Wholesale Pricing Catalog.

I.2.3

V16.1

®

®

.com

C

(Phone) 1-800-237-1326 6:00AM - 4:30PM CST (24 Hour Fax) 1-608-781-3667


Drawer Slides by SALICE

Hardware Options

Ordering & Pricing Notes: Futura “Push” Undermount Drawer Slides 1 Order Forms

Ordering Guidelines Please use Hardware Order Form (E•Z Form #13).

1 Pricing

Pricing Please see Section I.1 of the Wholesale Pricing Catalog. Technical Notes: Futura “Push” Undermount Drawer Slides

1 2 3 4 5

6

7

Hardware Options (Chapter I) The new “Push” opening system for handle-less drawers is fully integrated in the runner. A slight “push” on “Push” Undermount Slides the drawer front is sufficient for the drawer to self-open. Full Extension Full extension runner. Load Capacity 75# Dynamic / 100# Static. Front locking clips and rear mounting brackets must be ordered separately. Locking Clips and Mounting Brackets Salice Undermount Drawer Slides are only compatible with Salice Front Locking Clips. Height adjustment (+3mm) with A710.610 Front Locking Clips. Compatible with all Futura slides. Adjustability Drawer height (+2.5mm), depth (+/-2.0mm) and side (+/-1.5mm) adjustment with A750.010 Front Locking (With Front Locking Clips) Clips. Compatible with 2012 or later Futura slides. Screws needed to attach drawer slides to cabinet are sold separately. • Eight #6 x ⅝ FHP wood screws required per pair (see Section I.3). Screws needed to attach front locking clips to drawer box are sold separately. Screws Sold Separately • Four #6 x ⅝ FHP wood screws required per pair (see Section I.3). Screws needed to attach rear mounting brackets to cabinet are sold separately. • Two #6 x ⅝ FHP wood screws required per bracket (see Section I.3). Technical Information Please see www.saliceamerica.com for additional information and technical specifications. Drawer Box Options (Chapter H) A 13mm bottom panel inset is required. Requires drawer box notching option NHH1.

1 Bottom Panel Inset 2 Drawer Box Notching

Sizes / Dimensions Compatible with ½" [12.7mm] and ⅝" [15.9mm] drawer box side wall thicknesses only. Minimum inside drawer width of 8" [203.2mm] when using either version of front locking clips. Drawer box depth must match the slide length. ie: 12" [305.0mm], 15" [381.0mm], 18" [457.0mm], 21" [533.0mm].

1 Side Thickness 2 Minimum Width 3 Drawer Box Depth

Front Locking Clips - Optional Installation The Salice Front Locking Clips (A710.610 or A750.010) required for the Futura Soft Close and Futura Push 1 Installation Undermount Drawer Slides can also be installed by Walzcraft. The drawer box must have a 13mm bottom panel inset and also include the NHH1 Notch & Hook Hole Combination. Available with assembled melamine and pre-finished wood drawer boxes only. Not available with RTA 2 Availability (Ready to Assemble) drawer boxes. Salice Undermount Drawer Slides are only compatible with Salice Front Locking Clips. If ordering Blum Drawer Slide Locking Devices (Release Clips) from Section I.9, you will need to order Blum Drawer Slides separately. Front locking clips (release clips) vary by manufacturer. WalzCraft can provide and install other brands Other Front Locking Clips 3 upon request. (Release Clips) The following information is required when ordering front locking clips (release clips) that are not inventoried by WalzCraft: • Brand and Model # of the drawer slide being used. • Manufacturer’s Part # of the Front Locking Clips (Release Clips), if available.

®

► For PRICING ► See Section I.1 in our Wholesale Pricing Catalog. ®

.com

C

99.7% American Made

I.2.4

V16.1

I


Drawer Slides by SALICE

Hardware Options

Single Extension Epoxy Coated Runners - A208

• Rear mounting brackets optional depending on chosen installation method (sold separately).

Sold Separately

I

Single Extension Epoxy Coated Runners Length

Extension

Closing Type

Color

WCI Item #

Salice Item #

160715 160716 160717

A208/45.1

18" [450.0mm]

Single

Self-Closing

White

20" [500.0mm]

Single

Self-Closing

White

22" [550.0mm]

Single

Self-Closing

White

A208/50.1 A208/55.1

Additional lengths available - 12" [300.0mm], 14" [350.0mm], 16" [400.0mm], 24" [600.0mm]. Please submit requests to our Customer Support Team.

Rear Mounting Brackets for Single Extension Runners Description

WCI Item #

Salice Item #

181006

ASO208NANDR/L

Rear Mounting Bracket (Socket) for A208 drawer slide - Pair - Includes one left and one right bracket.

Ordering & Pricing Notes: Single Extension Epoxy Coated Runners 1 Order Forms

Ordering Guidelines Please use Hardware Order Form (E•Z Form #13).

1 Pricing

Pricing Please see Section I.1 of the Wholesale Pricing Catalog. Technical Notes: Single Extension Epoxy Coated Runners

5 Technical Information

Hardware Options (Chapter I) Single extension (3/4), white epoxy coated self closing drawer slides. 75# Dynamic / 100# Static. Rear mounting brackets must be ordered separately. Screws needed to attach drawer slides to cabinet are sold separately. • Eight #6 x ⅝ FHP wood screws required per pair (see Section I.3). Screws needed to attach rear mounting brackets to cabinet are sold separately. • Two #6 x ⅝ FHP wood screws required per bracket (see Section I.3). Please see www.saliceamerica.com for additional information and technical specifications.

1 Drawer Box Notching

Drawer Box Options (Chapter H) Single extension epoxy coated runners do not require any drawer box notching.

1 Side Thickness

Sizes / Dimensions Compatible with all drawer box side wall thicknesses.

1 Single Extension 2 Load Capacity 3 Rear Mounting Brackets 4 Screws Sold Separately

► For PRICING ► See Section I.1 in our Wholesale Pricing Catalog. I.2.5

V16.1

®

®

.com

C

(Phone) 1-800-237-1326 6:00AM - 4:30PM CST (24 Hour Fax) 1-608-781-3667


Hardware Options

Drawer Slides - Side Mount

Tru-Trac™ 100 Series Side Mount Drawer Slide

• Rear mounting brackets optional depending on chosen installation method (sold separately).

I

K NAPE

&

V OGT Technical

Support

(800) 253-1561

Tru-Trac™ 100 Series Side Mount Drawer Slides Length

Actual Length

Extension

Closing Type

Color

WCI Item #

Tru-Trac Item #

18"

17¾" (450.0mm)

Full

Positive Stop

Zinc

KVTT100 B18

20"

19¾" (500.0mm)

Full

Positive Stop

Zinc

22"

21¾" (550.0mm)

Full

Positive Stop

Zinc

172207 172208 172209

KVTT100 B20 KVTT100 B22

Additional lengths available - 10" [250.0mm], 12" [300.0mm], 14" [350.0mm], 16" [400.0mm], 24" [600.0mm], 26" [650.0mm], 28" [700.0mm]. Please contact our Customer Support Team for more information.

Rear Mounting Brackets for Tru-Trac™ Drawer Slides Description Rear Mounting Bracket - 2 / " [61.9mm] W x 1⅞" [47.6mm] H x 3½" [88.9mm] L, metal (pair) 7 16

WCI Item #

Tru-Trac Item #

181007

KVTT401

‘Advice on Choosing The Correct Hardware for your Project’ •

Making the right choices when selecting hardware is crucial to the success of most woodworking projects. The cabinet hardware (hinges, mounting plates, slides, etc.) shown in this catalog is very specialized in terms of how it will attach to components and cabinets, and how it will function in day to day use for years to come. Because selecting the correct hardware is such an important decision, WalzCraft recommends that you leave nothing to chance. If in doubt about how a specific piece of hardware will function, our recommendation is to order the hardware in question and ‘trial mount’ it in the exact way you intend to use it. Since WalzCraft is not on site with you building your project, it is very difficult for us to make the final call as to whether a piece of hardware is the right choice for your project, this important decision is your sole responsibility.

• Hardware is most easily and confidently chosen when you have used a specific piece of hardware before, and are totally familiar with how it functions, as well as how to properly install and adjust it. If you believe that a particular piece of hardware is what you need, but you have no experience with it, you should do a ‘trial mount’ using the hardware in the exact way you intend for your project. • WalzCraft offers a 30% discount on hardware used for trial mounting. The discount applies to the pieces you will need to mount 1 door or 1 drawer box. As an example, to trial mount one door you might need 2-hinges, 2-mounting plates, and the screws. All items needed for the trial mount are eligible for the 30% discount. • It is important to check Quotes, Order Acknowledgments and Order Price Acknowledgments for accuracy. Please double check all paperwork and help us get your order filled correctly the first time. Please note that WalzCraft paperwork includes the following ‘remind er’ message:

◦ Because selecting the correct hardware is such an important decision, WalzCraft recommends that you leave nothing to chance. If in doubt about how a specific piece of hardware will function, our recommendation is to order the hardware in question and ‘trial mount’ it in the exact way you intend to use it. Since WalzCraft is not on site with you building your project, it is very difficult for us to make the final call as to whether a piece of hardware is the right choice for your project, this important decision is your sole responsibility.

• For technical support, please contact hardware manufacturers at the phone numbers or websites provided throughout Chapter I in our Product Specifications Catalog and our Wholesale Pricing Catalog. • WalzCraft will not be liable for replacement of manufactured product or hardware if found that it is not compatible. I.4.1

V16.1

®

®

.com

C

(Phone) 1-800-237-1326 6:00AM - 4:30PM CST (24 Hour Fax) 1-608-781-3667


Drawer Slides - Side Mount

Hardware Options

Ordering & Pricing Notes: Tru-Trac™ Side Mount Drawer Slides 1 Order Forms

Ordering Guidelines Please use Hardware Order Form (E•Z Form #13).

1 Pricing

Pricing Please see Section I.1 of the Wholesale Pricing Catalog. Technical Notes: Tru-Trac™ Side Mount Drawer Slides

7 Technical Information

Hardware Options (Chapter I) A smart & economical choice for a 100# class, full extension ball-bearing slide solution. Features a non-handed design. Zinc Finish. Telescopic movement on steel ball-bearings, delivers a smooth operation. A positive stop bumper provides an anti-rebound feature. Lever disconnect for easy drawer removal. Full extension runner. Side mounting for frame and frameless construction. Load Capacity: 100-pound class. Rear mounting brackets for face frame installation must be ordered separately. Screws needed to attach rear mounting brackets to cabinet are sold separately. • Two #6 x ⅝ FHP wood screws required per bracket (see Section I.3). Will fit left or right installation. Face Frame Mounting Holes. 32mm and Traditional Hole Patterns. Screws needed to attach drawer slides to cabinet are included. • Comes with twelve #7x12P wood screws. Please contact Knape & Vogt at (800) 253-1561 for additional information and technical support.

1 Drawer Box Notching

Drawer Box Options (Chapter H) Does not require any drawer box notching.

1 Side Thickness 2 Side Clearance 3 Slide Height

Sizes / Dimensions Compatible with all drawer box side wall thicknesses. Industry standard side clearance: ½" [12.7mm] + 1/32 / -0". Height: 125/32" [45.0mm].

1 Tru-Trac™ 100

2 Full Extension 3 Side Mounting 4 Load Capacity

5 Rear Mounting Brackets

6 Screws Included

®

I

► For PRICING ► See Section I.1 in our Wholesale Pricing Catalog. ®

.com

C

99.7% American Made

I.4.2

V16.1


Drawer Slides by blum

Hardware Options

TANDEM plus BLUMOTION Undermount Drawer Slides - 563H

• Locking devices are required for drawer slides to function (sold separately). • Rear mounting brackets are optional depending on chosen installation method (sold separately).

Sold Separately

I

Blum Technical Support: (800) 438-6788

www.blum.com

TANDEM plus BLUMOTION Undermount Drawer Slides - 563H Drawer Length

Extension

Closing Type

9" [229.0mm]

Full

12" [305.0mm]

Maximum Cabinet Depth with Rear Bracket

Runner Length

WCI Item #

Blum Item #

1015/32" (266.0mm)

103/16" (259.0mm)

174009

563H2290B10

14 /16" (370.0mm)

12

563H3050B

BLUMOTION Soft Close

17 /16" (446.0mm)

15

563H3810B

Full

BLUMOTION Soft Close

20 /16" (522.0mm)

18

Full

BLUMOTION Soft Close

2319/32" (599.0mm)

2115/16" (557.0mm)

Maximum

Minimum

BLUMOTION Soft Close

1125/32" (299.0mm)

Full

BLUMOTION Soft Close

15" [381.0mm]

Full

18" [457.0mm] 21" [533.0mm]

9

9

9

(328.0mm)

12 /16" (319.0mm)

174010

29

(404.0mm)

15 /16" (395.0mm)

174011

29

(480.0mm)

18

(471.0mm)

174012

563H4570B

219/16" (548.0mm)

174013

563H5330B

29

/32" /32"

/32"

9

9

17

/32"

rear mounting brackets (face frame only)

slides / runners

locking devices

Undermount Drawer Slide Components

NHH1 - Drawer Box Notching

► For PRICING ► See Section I.1 in our Wholesale Pricing Catalog. I.9.1

V16.1

®

®

.com

C

(Phone) 1-800-237-1326 6:00AM - 4:30PM CST (24 Hour Fax) 1-608-781-3667


Drawer Slides by blum

Hardware Options

Ordering & Pricing Notes: TANDEM plus BLUMOTION Undermount Drawer Slides 1 Order Forms

Ordering Guidelines Please use Hardware Order Form (E•Z Form #13).

1 Pricing

Pricing Please see Section I.1 of the Wholesale Pricing Catalog. Technical Notes: TANDEM plus BLUMOTION Undermount Drawer Slides

Hardware Options (Chapter I) Full extension, concealed drawer runners with BLUMOTION soft closing and TANDEM smooth running 1 TANDEM / BLUMOTION action. 2 Load Capacity 100 lbs. static load capacity. Blum Undermount Drawer Slides are only compatible with Blum locking devices. Locking Devices & 3 Locking devices and rear brackets must be ordered separately. Mounting Brackets Four-Dimensional adjustment. 4 Adjustability Elongated holes for depth adjustment. Screws needed to attach drawer slides to cabinet are sold separately. • Eight #6 x ⅝ FHP wood screws required per pair (see Section I.3). Screws needed to attach front locking clips to drawer box are sold separately. 5 Screws Sold Separately • Four #6 x ⅝ FHP wood screws required per pair (see Section I.3). Screws needed to attach rear mounting brackets to cabinet are sold separately. • Three #6 x ⅝ FHP wood screws required per bracket (see Section I.3). 6 Technical Information Please see www.blum.com or call Blum at (800) 438-6788 for additional information and technical support. Drawer Box Options (Chapter H) A 13mm bottom panel inset is required. Requires drawer box notching option NHH1.

1 Bottom Panel Inset 2 Drawer Box Notching

Sizes / Dimensions 13mm (½") to 16mm (⅝") drawer box material thickness. Minimum inside drawer width of 611/16" [170.0mm] when using front locking clips T51.1901 L/R. Minimum inside drawer width of 3¾" [95.0mm] when using front locking clips T51.0801.20 L/R. Slides are available in 9" [229.0mm] to 21" [533.0mm] lengths in 3" [76.0mm] increments for face frame or panel (frameless) cabinets. Drawer box depth must match the slide length. ie: 9" [229.0mm], 12" [305.0mm], 15" [381.0mm], 18" [457.0mm], 21"[533.0mm]).

1 Side Thickness 2 Minimum Width 3 Slide Lengths 4 Drawer Box Depth

1 Installation 2 Availability

3

Other Locking Devices (Release Clips)

®

Locking Devices - Optional Installation The Blum Locking Devices (T51.1901 L/R or T51.0801.20 L/R) required for the TANDEM plus BLUMOTION Undermount Drawer Slides can also be installed by Walzcraft. The drawer box must have a 13mm bottom panel inset and also include the NHH1 Notch & Hook Hole Combination. Available with assembled melamine and pre-finished wood drawer boxes only. Not available with RTA (Ready to Assemble) drawer boxes. Blum Undermount Drawer Slides are only compatible with Blum Locking Devices. If ordering Salice Drawer Slide Front Locking Clips (Release Clips) from Section I.2, you will need to order Salice Drawer Slides separately. Locking Devices (release clips) vary by manufacturer. WalzCraft can provide and install other brands upon request. The following information is required when ordering front Locking Devices (release clips) that are not inventoried by WalzCraft: • Brand and Model # of the drawer slide being used. • Manufacturer’s Part # of the Front Locking Clips (Release Clips), if available.

► For PRICING ► See Section I.1 in our Wholesale Pricing Catalog. ®

.com

C

99.7% American Made

I.9.2

V16.1

I


Drawer Slides by blum

Hardware Options

Blum Locking Device for Undermount Drawer Slides 1 Ordering 2 Pricing 3 Compatibility 4 Installation 5 Self Aligning 6 Adjustability 7 Screws Sold Separately 8 Materials 9 Minimum Size

I

Please use Hardware Order Form (E•Z Form #13). One right and one left required per drawer. Please see Section I.1 of the Wholesale Pricing Catalog. For use with 563 series runners only. Available installed on assembled melamine & pre-finished wood drawer boxes with NHH1 only. Captive right device and self aligning left device. Height adjustment of +⅛" [3.0mm]. Side adjustment of +/-1/16" [1.5mm]. Self-adjusting drawer length tolerance. Requires four #6 x ⅝" wood screws per pair (Section I.3). Steel base with synthetic, spring loaded release levers. Minimum inside drawer width of 611/16" [170.0mm].

WCI Item #172566

Blum Locking Device for Undermount Drawer Slides - Narrow (Limited Space) Drawer 1 Ordering 2 Pricing 3 Compatibility 4 Load Capacity 5 Installation 6 Bottom Panel Inset 7 Adjustability 8 Screws Sold Separately 9 Materials 10 Minimum Size

Please use Hardware Order Form (E•Z Form #13). One right and one left required per drawer. Please see Section I.1 of the Wholesale Pricing Catalog. For use with 563 series runners only. Maximum dynamic load capacity 25 lb. Available installed on assembled melamine & pre-finished wood drawer boxes with NHH1 only. Designed for ½" (13mm) drawer bottom recess. Height adjustment of +⅛" (3mm). Self-adjusting drawer length tolerance. Requires four #6 x ⅝" wood screws per pair (Section I.3). Vertical mount, two-piece nylon. Minimum inside drawer width of 3¾" (95.0mm). Minimum sub-front thickness ⅝" (16.0mm).

WCI Item #177527

Rear Mounting Bracket for Undermount Drawer Slides (Face Frame Cabinet Only) 1 Ordering 2 Pricing 3 Compatibility 4 Adjustability 5 Screws Sold Separately 6 Materials

Please use Hardware Order Form (E•Z Form #13). Sold in pairs. Please see Section I.1 of the Wholesale Pricing Catalog. For use when installing TANDEM 563 series runners only, in face frame cabinets. Not for use with 9" [229.0mm] runners. Not necessary for frameless (panel) cabinet installation. Lateral self-alignment ⅛" (3.0mm). Use at least three #6 wood screws per bracket (Section I.3). Non-handed, one-piece stamped steel design, zinc-coated.

WCI Item #181008

► For PRICING ► See Section I.1 in our Wholesale Pricing Catalog. I.9.3

V16.1

®

®

.com

C

(Phone) 1-800-237-1326 6:00AM - 4:30PM CST (24 Hour Fax) 1-608-781-3667


Drawer Slides by blum

Hardware Options

TANDEM Template 1 Ordering 2 Pricing 563 Series TANDEM 3 Runners 4 6mm Diameter Holes 5 2.5mm Diameter Holes 6 Drill Bits

Please use Hardware Order Form (E•Z Form #13). One right and one left required per drawer. Please see Section I.1 of the Wholesale Pricing Catalog. Essential tool for drawers using 563 series TANDEM runners. Used to bore the 6MM diameter holes for rear hooks. Used to pre-bore the 2.5mm diameter holes for TANDEM locking devices at the required angle. Does not include drill bits.

WCI Item #174015

I TANDEM plus BLUMOTION Undermount Drawer Slide Accessories Description

WCI Item #

Blum Item #

Front Locking Device - Left & Right (pair)

172566

T51.1901 L/R

Front Locking Device - Narrow Drawer - Left & Right (pair)

177527

T51.0801.20 L/R

Rear Mounting Bracket - For Face Frame Cabinet (pair)

181008

295.3750.02

TANDEM Template

174015

T65.1600.01

‘Advice on Choosing The Correct Hardware for your Project’ •

Making the right choices when selecting hardware is crucial to the success of most woodworking projects. The cabinet hardware (hinges, mounting plates, slides, etc.) shown in this catalog is very specialized in terms of how it will attach to components and cabinets, and how it will function in day to day use for years to come. Because selecting the correct hardware is such an important decision, WalzCraft recommends that you leave nothing to chance. If in doubt about how a specific piece of hardware will function, our recommendation is for you to order a sample of the hardware in question and ‘trial mount’ it in the exact way you intend to use it. Since WalzCraft is not on site with you building your project, it is very difficult for us to make the final call as to whether a piece of hardware is the right choice for your project, this important decision is your sole responsibility.

• Hardware is most easily and confidently chosen when you have used a specific piece of hardware before, and are totally familiar with how it functions, as well as how to properly install and adjust it. If you believe that a particular piece of hardware is what you need, but you have no experience with it, you should do a ‘trial mount’ using the hardware in the exact way you intend for your project. • WalzCraft offers a 30% discount on hardware used for trial mounting. The discount applies to the pieces you will need to mount 1 door or 1 drawer box. As an example, to trial mount one door you might need 2-hinges, 2-mounting plates, and the screws. All items needed for the trial mount are eligible for the 30% discount. • It is important to check Quotes, Order Acknowledgments and Order Price Acknowledgments for accuracy. Please double check all paperwork and help us get your order filled correctly the first time. Please note that WalzCraft paperwork includes the following ‘remind er’ message:

◦ Because selecting the correct hardware is such an important decision, WalzCraft recommends that you leave nothing to chance. If in doubt about how a specific piece of hardware will function, our recommendation is to order the hardware in question and ‘trial mount’ it in the exact way you intend to use it. Since WalzCraft is not on site with you building your project, it is very difficult for us to make the final call as to whether a piece of hardware is the right choice for your project, this important decision is your sole responsibility.

• For technical support, please contact hardware manufacturers at the phone numbers or website provided throughout Chapter I in our Product Specifications Catalog and our Wholesale Pricing Catalog. • WalzCraft will not be liable for replacement of manufactured product or hardware if found that it is not compatible.

®

► For PRICING ► See Section I.1 in our Wholesale Pricing Catalog. ®

.com

C

99.7% American Made

I.9.4

V16.1


I. - Drawer Slides & Runners  

Drawer Slides and Drawer Box Runners

Read more
Read more
Similar to
Popular now
Just for you