Issuu on Google+

Design Options

Continuous Grain Option

Upon request, WalzCraft will manufacture solid wood components, standard wood veneer components or Reconstituted wood veneer components using a Continuous Grain - End Matched Pattern.

G

• To achieve this look, we build an oversized glued up panel, or veneered panel, and cut parts based on the dimensions needed for your con figuration. The drawing to the right demonstrates how the grain flows continuously from one panel to the next. This option is ideal for a bank of drawer fronts or when the grain must be consistent between each panel in a series of stacked doors. ○ EBT201 is the only Edgeband Treatment Option available for Continuous Grain when using standard wood veneer. ○ EBT201-R is the only option for Continuous Grain when using Reconstituted wood veneer. • Solid Wood Products: WalzCraft’s Continuous Grain option is most effective on solid wood products that are Rift Sawn (Oaks), Straight Grain and Quartersawn (see Slab & Batten doors in Section B.9). The relative straight grain appearance of all these cuts makes Continuous Grain very desirable. Even Plain Sawn solid wood can benefit greatly from using the Continuous Grain option, especially when the specie exhibits a strong grain pattern with definite cathedrals. • Standard or Reconstituted Veneer Products: WalzCraft’s Continuous Grain option is most effective on veneer products that are Rift Sliced (Oaks), Straight Grain and Quartersliced (see Veneered & Edgebanded doors in Section B.10 and B.11). The relative straight grained appearance of all these cuts make Continuous Grain very desirable. Even Plain Sliced veneer can benefit greatly from using the Continuous Grain option, especially when the specie exhibits a strong grain pattern with definite cathedrals. Rotary Cut veneers benefit the least from Continuous Grain because the Rotary Grain Pattern sometimes lacks definition. • Additional custom engineering charges will be applied. To inquire, please contact our Customer Support Team. • Drawings and order details may be e-mailed to: customersupport@WalzCraft.com

Without the Continuous Grain Option ZebraWood - Straight Grain

Architectural Grade/Reconstituted/Composite Veneer

Without the Continuous Grain Option Doors - Vertical Grain Drawer Fronts - Vertical Grain No special matching from left to right.

G.16.1

V15.3

®

®

.com

C

With the Continuous Grain Option ZebraWood - Straight Grain

Architectural Grade/Reconstituted/Composite Veneer

With the Continuous Grain Option Doors - Vertical Grain Drawer Fronts - Vertical Grain No special matching from left to right.

(Phone) 1-800-237-1326 6:00AM - 4:30PM CST (24 Hour Fax) 1-608-781-3667


G.16 - Continuous Grain Option