Issuu on Google+

Rubbing strakes and rubber extrusions Fender profiles made of stainless steel and PVC bases PVC and anodized aluminium rubbing strakes Profiles, gaskets and wireways Marina Fenders

PM

Fender profiles made of stainless steel and PVC bases Low profile D-section rubbing strake made of mirror polished AISI 316 stainless steel Fitted with flared holes.

AISI 316 Profiles | Rubbing strake

44 - Rubbing strakes and rubber extrusions

Code

44.480.11 44.480.12 44.480.13 44.480.14 44.480.06 44.480.15 44.480.05 44.480.04

A mm 15

B mm 5

18 21 25 25 30 38 40

5.3 5.5 7 10 9 15 8

/m

500 600 700 980 1463 1300 3330 1720

Rods m 3

Base OPTIONAL 44.480.16

Terminal OPTIONAL

Distance between hole centres mm 185

3 3 3 4 3 4 3

44.480.17 44.480.18 44.480.19 44.480.19 44.480.21 44.480.22

44.484.18 44.484.20 44.484.28

185 185 185 120 185 120 185

Minimum order of 12 meters

Semi-round profile made of mirror polished AISI 316 stainless steel Already perforated and flared.

AISI 316 Profiles

Code

44.479.10 44.479.15 44.479.20

Lenght mm

Height mm

10 14 20

3.5 4 4

Fender profiles made of stainless steel and PVC bases

Rod m

3 3 3

/m 0.25 0.41 0.78

Inter-holes cm

20 20 20

Minimum order of 12 meters.

Rubbing strake made of mirror polished stainless steel C-shaped profile, pre-drilled and faireds; sold in 3-meter bars.

AISI 316 Profiles | Rubbing strake

Code

44.480.20 44.480.30 44.480.38

A mm

B mm

S mm

Rod m

Base OPTIONAL

Terminal OPTIONAL

Inter-holes cm

20 28 35

4.6 7 9

1.5 1.5 1.5

3 3 3

44.480.33-35 44.480.36 44.480.37

44.484.20 44.484.28

20 20 20

Minimum order of 12 meters.

Heavy duty base for rubbing strakes Made of white PVC, fitted with cover strip. Profiles | Rubbing strakes

Code

44.480.33

A mm

B mm

To combine with profiles

Roll m

36

15

44.480.20

24

Fender terminals for C-shaped and almond-shaped profiles AISI 316

Flush and perfectly combining with the corresponding rubbing strakes. Mirror polished AISI 316 stainless steel.

Fender terminals | Rubbing strake

Fender profiles made of stainless steel and PVC bases

Code

44.484.18 44.484.20 44.484.28

612

www.versilia.it

For profiles

S.S.

44.480.12 44.480.20; 44.480.13 44.480.30; 44.480.14

PVC 44.480.17 44.480.35; 44.480.18 44.480.36; 44.480.19


44

Fender profiles made of stainless steel and PVC bases Base for stainless steel rubbing strakes Made of semi-rigid white PVC, available in 24 meter coils. Profiles | Rubbing strakes

Code

44.480.16 44.480.17 44.480.18 44.480.19 44.480.21 44.480.22 44.480.35 44.480.36 44.480.37

Height mm

S.S. profile cross section

35

15x5

40

18x5

45

21x5,5

50

25x7

55

30x9

70

40x8

45

20x5

46

28x7

50

35x9

44.480.19

Roll m

44.480.11 44.480.12 44.480.13 44.480.14 44.480.15 44.480.04 44.480.20 44.480.30 44.480.38

44.480.21

24 24 24 24 24 24 24 24 24

44.480.22

44.480.16

44.480.35

44.480.17

44.480.36

44 - Rubbing strakes and rubber extrusions

44.480.18

To combine with OPTIONAL profile

44.480.37

PVC and anodized aluminium rubbing strakes Bumper fenders with anodised aluminium base Fitted with flexible PVC fender inserts, available in various colours; to be used with plastic terminals in table below; base sold in 3 to 6 metre lengths.

Minimum order of 24 metres. Profiles | Bumper fenders | Rubbing strakes

Alloy profile only

H mm

A mm

PVC insert in 24-m reels Code

Matching terminals

Colour

Code

9+5

44.485.11 44.485.14** 44.485.12 44.485.15** 44.485.13 44.485.16**

black black white white grey grey

44.479.03 44.579.03 44.485.01 44.484.01

Colour

black plastic white plastic chromed brass SS

44.485.10*

38

44.485.26*

25

7+5

44.485.27

black

44.479.04

black plastic

44.485.65*

63

15+6

44.485.66

black

44.485.64

anodized light alloy

44.486.10*

56

14+5

44.486.11 44.486.12 44.486.13

black white grey

44.486.01 44.586.01 44.484.02

black plastic white plastic stainless

44.487.10

56

14

44.486.11 44.486.12 44.486.13

black white grey

44.486.01 44.586.01 44.484.02

black plastic white plastic stainless

44.494.10*

75

15+5

44.494.11 44.494.12

black white

44.494.01 44.594.01

black plastic white plastic

100

16+5

44.495.11

black

44.495.01

black plastic

44.495.10* *

Fitted with cover strip teeth

**

Profile overside

44.485.01 44.485.26

44 44. .4 48 85 5. .2 26 7 +

44.485.64

44. 486 -58 6.0 1

44.479.04

44.4

94.0

Sailing with you, since 1958

44 .4 85 .1 0

3 9.0 .57 44 +

44 .4 85 .1 1

1

613


44

PVC and anodized aluminium rubbing strakes

Rubbing strake made of rigid durable plastic, fitted with flexible PVC insert Unbreakable, flexible without puckering, low cost; white bar base 4 meters long, PVC profile, available in 20 meter rolls. Caution: base and fender extrusion are sold separately but have to be mounted together to make the complete profile.

Minimum order: 20 metres per model. Profiles | Rubbing strake

Version

44 - Rubbing strakes and rubber extrusions

A B C D

white

44.030.05 44.038.05 44.040.05 44.055.05

Only profile

grey

white

44.038.07 -

44.030.40 44.038.40 44.040.40 44.055.40

44.030.01

Only PVC insert

grey

black

K profile mm

44.030.50 44.040.50 44.055.50

44.030.60 44.040.60 44.055.60

30 38 40 55

44.040.01

Height H tot with PVC mm

Cover overhang mm

30 38 40 55

White terminal Joint cover model white

44.030.01 44.040.01 44.040.01 44.055.01

5 6 5 5

44.042.21 44.042.26 44.042.27 44.042.22

44.055.01 A

B

C

D

Fender for boat mounting with leap seal Made of PVC; to be mounted only on one end, available in 24 meter coils. Profiles

Color

white

44.478.00 44.478.01 44.478.02

black

44.482.00 44.482.01 44.482.02

A mm

B mm

18 30 37

26 38 45

black

Terminal OPTIONAL

44.482.03 44.488.01 44.482.04

white

44.588.01 -

Fender profile with "L" shape base support Flexible PVC profile fitted with semi-rigid PVC support; it may be bent in any position; ideal for boats with leap seals; available in 24 meter coils; minimum order of 24 meters per model. Profiles

44.343.50

Code

Colour

44.488.00 44.588.00 44.488.45

black white black

Projection mm

Height mm

Core mm

33

30

18x18

33

30

18x18

36

38

22x22

Terminals OPTIONAL

44.488.01 44.588.01 44.488.46

90째 angle terminals OPTIONAL

44.343.50 -

44.488.45

44.488.00/ 44.588.00

PVC rubbing strake suitable for boats with boxed joint Made of black PVC, fitted with semi-rigid PVC insert and white screw cover; snap-in insert mounting; built-in strip cover. Profiles | Rubbing strake

Code

44.483.02-44.483.0044.483.01-44.483.03

44.483.00 44.483.01

A mm

B mm

44 55

18 21

Terminal

44.483.02 44.483.03

Roll m

24 24

Fender terminal made of mirror polished AISI 316 stainless steel Profiles

Code

44.484.01 44.484.02

614

www.versilia.it

PVC and anodized aluminium rubbing strakes

For profiles

44.485.10; 44.042.xx 44.486.10; 44.487.10

mm 40 (L) x 22 (H) 56.5 (L) x 30 (H)


PVC and anodized aluminium rubbing strakes

44

PVC fender profile RADIAL PATENT

Invisible rigid base, designed to be screwed/riveted onto the hull, 2-m slugs; semirigid external profile with easy pressure installation (no weld required), available in 24-metre rolls. Caution: tray and insert are separated and ahve to be mounted to make the profile complete.

Profiles

Cable tray, only

Only PVC colour

white

grey

black

Minumum radius bending mm

white

44.032.02 44.042.02 44.052.02 44.065.02

44.032.03 44.042.03 44.052.03 44.065.03

44.032.04 44.042.04 44.052.04 44.065.04

50

80

44.030.01 44.588.01 44.055.01 44.055.01

44.080.05

44.080.02

44.080.03

44.080.04

100

-

44.081.05

44.081.02

44.081.03

44.081.04

160

-

60 70

Joint cover SS

SS

44.484.01 44.484.02 44.484.02 44.084.10 (right) / 44.084.11 (left) -

44.042.15 44.042.16 44.042.17 44.042.18 -

minimum order of 24 metres radial80 + 44.042.18 + 44.084.11/44.054.10

44.042.15/16/17/18

44.484.01/02

44.054.10 DX

44.084.11 SX

Profiles, gaskets and wireways Porthole sealing profiles Made of special salt-resistant black PVC, suitable for sealing portholes. Profiles

Code

mm 26x20

44.481.00

Roll m

24

44 - Rubbing strakes and rubber extrusions

44.032.05 44.042.05 44.052.05 44.065.05

Terminals

Profile designed for trimming reinforced fiberglass, wood or metal Made of PVC 55 shore. Profiles

white

44.492.01

black

44.492.00

B mm

C mm

Suitable for tickness

Roll m

A mm

17

10

3.5

3/4

24

Profile designed for trimming reinforced fiberglass and other materials white

44.491.01 44.491.05

black

44.491.00 44.491.04

Suitable for tickness

A mm

B mm

Roll m

1.5 - 4 4-6

14 16.5

10 10.5

50 50

1 .0 91 .4 44

Made of semi-flexible reinforced PVC. Profiles

Profiles suitable for beading fibreglass Made of flexible reinforced PVC, fitted with waterproof neoprene foam seal; ideal for lockers, engine cases, etc. Profiles

44.493.00 44.493.01

For thickness

Roll m

2-4

50

2-4

25

Colour

Black Black

Sailing with you, since 1958

44.493.00

Code

44.493.01

615


44

Profiles, gaskets and wireways Self-adhesive profiles Perfect solution for sealing. Ideal use door, engine box, locker, hatch. High quality 3M adhesive tape. Profiles

Code

Colour

44.490.01 44.490.11

Black White

Material

Roll m

EPDM

25

silicon

25

Self adhesive EPDM D-section soft rubber extrusion Perfect solution for sealing. Ideal use door, engine box, locker, hatch. High quality 3M adhesive tape. Rubber extrusion | Seal

Code

44 - Rubbing strakes and rubber extrusions

44.490.02

A base mm

B height mm

17.5

16.9

Colour black

Roll m

25

Windscreen PVC profile Salt resistant. Profiles

white

44.472.02

black

Roll m

44.472.01

24

Black one-way semirigid reinforced groove 44.489.00 Suitable for sliding glasses, available in 10-metre coils, for glass sizes 4/6 mm. Window rails

Profiles, gaskets and wireways

STAND-PRO watertight guide profiles for sliding glass panes AISI 316 stainless steel profile, anti-friction high density polyethylene bottom, neoprene intermediate bearing and vibration dampening felt, screw mounting with the profile; side anti-sliding and vibration-dampening synthetic brushes made of UV resistant material. Window rails

Code

44.751.19 44.751.20

Profiles, gaskets and wireways

For glass thickness mm

Rod lenght m

Track

Width mm

Heigth mm

5/6,5 5/6,5

2.44 2.44

single double

15 25

16 11.5

Anti-draught guide Designed to seal sides against draught between two glasses, made of AISI 316 stainless steel. Profiles

Code

Height mm

44.751.18

17

Profiles, gaskets and wireways

Width mm

Rod lenght m

14

2.44

Stainless steel hook 44.473.00 Designed for mounting windscreens, fitted with universal swivelling joint. Hooks for windscreens

1 0.0 .01 44

2 .0 10 .0 4 4

44.010.03

Profiles, gaskets and wireways

Wireway designed for mounting boat awnings, canopies and cushions using an insert Boat awnings, canopies and cushions are fastened by means of a relinga insert. Canopies

Code

44.010.01 44.010.02

Description Tray in white semirigid PVC for hoods and bimini tops Tray in white semirigid PVC for cushions

Package

44.010.03

6.5-mm Ă˜ soft PVC rod for insert. To be sewn into fabric.

60-m roll

4-m bars 4-m bars

Profile designed for beading boat protection cradles Made of flexible PVC. Profiles

Code

44.756.85

616

www.versilia.it

Width mm

Height mm

Roll m

73

16

24


Marina Fenders

44

Marina Fenders

Marina fenders or Bumper fenders for larger vessels 44.211.73 Made of flexible PVC, "L" shape mounting; 2.5 meter bars, to be coupled with PVS Polyguard edge protectors 33.517.01; price per bar, colour white. Profiles | Marina fenders | Docking fenders | Bumper fenders

Marina Fenders

Profiles | Polyform | Docking fenders

Code

33.517.01 33.517.02

Marina Fenders

Model

PG-1 angular PG-2 streight

Lenght mm

A

Section mm B C

185 (per side) 457

72 90

73 74

92 112

D 35 39

Fendering for marinas, quays and piles Made of flexible black PVC. Also suitable as bumper fendering for fishing vessels. Profiles | Marina fenders | docking fenders | pile Marina Fenders

Code

44.020.00

Cut-down size m

mm 70 base x 70 projection

2

Profiles designed to protect wharfs, quay and mooring poles Made of flexible gray PVC. Profiles

Code

44.021.00

Cross section mm

72x30h

Marina Fenders

44 - Rubbing strakes and rubber extrusions

POLYGUARD White PVC fendering for quays or marinas.

Rod m

2

Sailing with you, since 1958

617


Steering systems Steering wheels Engine control cables Steering cable connectors and remote control adapter kits Control levers Steering systems Coupling bars Outboard tiller extensions Hydraulic steering systems for outboard engines Hydraulic steering system accessories PM

Steering wheels 45.158.09

45.157.02

SPORT Steering wheels Made of soft black polyurethane foam, fitted with 3 light-alloy spokes and universal central hub (Ultraflex, Morse, Teleflex, Tx etc.). Steering wheels

Code

Steering wheels

Spokes color

45.157.02 45.158.09

Crown Ø mm

silver black

340 300

DELFINO Steering wheels

45 - Steering systems

Anodized light alloy spokes, soft TANEGUM UV resistant crown, universal central hub. Steering wheels

white

grey

45.158.12

Steering wheels

black

45.158.11

External Ø mm 310

45.158.10

45.158.12

45.158.10

45.158.11

MANTA Steering wheels Anodized light alloy spokes and soft polyurethane crown. Steeing wheels

Code

45.157.97 45.157.98 45.157.99

Crown

Steering wheels

Spokes

White Black Grey

Crown Ø mm 355

Silver Black Black

355 355

45.157.99

45.157.98

45.157.97

Steering wheels fitted with anatomically designed hand grip

Sturdy black plastic steering wheel

Code

45.150.00

618

45.158.06

45.158.05

Fitted with 3 spokes, crown Ø 320 mm. Steering wheels

Fitted with 3 spokes, central hub with universal cone, external Ø 355 mm.

Code

Steering wheels

Colour

45.158.05

Black

www.versilia.it

Colour

Black

Code

Steering wheels

45.158.06

Colour

White


45

Steering wheels TECHNIC series steering wheels

Central hub fitted with universal cone, anodized light alloy spokes, soft polyurethane crown. Spoke

Soft wheel

Black Silver Silver

Crown Ø mm 350 350 350

45.163.01

Root coated Carbon coated Black

45.163.02

45.163.01 45.163.02 45.163.03

45.163.03

Code

Steering wheels

TECHNIC series steering wheels Fitted with mirror polished stainless steel spokes, hub and soft polyurethane crown. Steering wheels

Steering wheels

Inserts

Black Black Black

Crown Ø mm 350 350 350

SKIPPER steering wheels

45 - Steering systems

45.163.24

Silver Carbon Root coated

45.163.25

45.163.24 45.163.25 45.163.26

Crown

45.163.26

Code

45.158.40

45.158.41

Made of soft polyurethane with silver colour spokes and chromed. Equipped with universal central hub. Steering wheels

Code

45.158.40 45.158.41

Crown

+

Steering wheels

Black Black + silver

Spokes

Silver Silver

Ø mm

350 350

Mirror polished SS steering wheels Central hub with universal cone, adjustable to allow centering the steering wheel. Diameter: 350mm. Steering wheels

Code

Crown

Colour

Code

Crown

Colour

45.171.35

Leather effect (polyurethane)

black

45.176.35

Polished stainless steel

45.172.35

Leather effect (polyurethane)

grey

45.175.35

Soft carbon effect polyurethane

black

45.173.35

Leather effect (polyurethane)

white

45.152.01*

Polyurethane

black

45.173.36 45.174.35

Leather effect (polyurethane)

cream

45.152.02* 45.152.05*

Polyurethane

grey

*

mahogany

Wood with polyurethane lacquer

Mahogany

stainless steel

mahogany

Without helm position gauge

45.172.35

45.176.35

45.173.35

45.152.01

45.173.36

45.174.35

45.152.02

45.152.05

Sailing with you, since 1958

45.175.35

45.171.35

619


45

Steering wheels PEGASO steering wheels Soft polyurethane crown, mirror-polished stainless steel spokes and central hub. Universal cable. Steering wheels

Code

45.158.30

Spokes

Ø mm

45.158.45

Crown

Black

SS

300

45.158.46

White

SS

300

BALTIC steering wheels

45.158.31

Made of soft polyurethane, glazed + chromed light alloy spokes. Fitted with universal central hub. Wheels

Code

Steering wheels

Crown

45.158.30 45.158.31

Spokes chrome + silver light alloy chrome + silver light alloy

Black White

Ø mm

320 320

45 - Steering systems

"EVO Marine" Steering wheels Made of polyurethane lacquered, all fitted with universal hub. Steering wheels

Silver

45.178.01 45.178.02

Crown

Spokes

Root effect

45.178.42

Silver Silver

Polyurethane grip

Ø mm

Black Grey

355 355

45.178.42

45.178.01

45.178.02

Steering wheels with stainless steel spokes Universal cone Ultraflex/Morse/Teleflex. 45.132.35

320

45.130.35 45.132.35 45.133.35 45.131.35 45.129.35

Steering wheels

Colour

400

45.133.40 45.131.40 45.129.40

Carbon coated Briar root laquer White soft polyurethane Grey soft polyurethane Black soft polyurethane

45.133.32-35-40

45.130.35

45.129.32-35-40

45.133.32 45.131.32 45.129.32

350

Ø mm

45.131.32-35-40

Steering wheels

Soft polyurethane steering wheels fitted with stainless steel spokes Universal cone Ultraflex/Morse/Teleflex. Steering wheels

black

Ø mm 350 280

45.128.01 45.127.01

www.versilia.it

Suitable for Tenders

45.128.01/45.127.01

45.128.04

620

grey

45.128.02 45.127.02

45.128.02/45.127.02

cream

45.128.04 -

45.128.03/45.127.03

white

45.128.03 45.127.03


Steering wheels

45

Polyurethane steering wheels Made of stainless steel, fitted with external soft polyurethane crown, universal cone: Ultraflex, Morse and Teleflex. Steering wheels

Steering wheels

Crown

white

45.149.33 -

Ø mm

black

45.139.33 45.139.40

340 400 /40 .33 39 1 . 45

3 .3 49 .1 5 4

Stainless steel steering wheels fitted with cubic crown Fitted with handle and universal central cone Ultraflex, Teleflex, Morse etc. Steering wheels

Crown coated root

Crown Ø mm

45.143.33 45.143.37

330 370

45 - Steering systems

Hand grip Fitting on steering wheel crowns to provide a quick rotation, universal size. Steering wheel accessories

Code

45.134.01 45.134.02

Steering wheels

Colour

Code

45.134.03 45.134.04

Black Grey

Colour

White Wood

1 4.0 .13 45

.02 134 45.

4 4.0 .13 45

.03 134 45.

45.134.01

Helm Indicator 45.130.01 For application at the centre of the wheel. Universal and self-adhesive. Once applied it can be adjusted for perfect centering.

Mahogany polyurethane steering wheel

Mahogany steering wheel

45.158.07 Fitted with mahogany polyurethane lacquered crown and black spokes. Steering wheels

Steering wheels

lacquered

45.160.00 Fitted with mirror polished stainless steel spokes and hub; universal central hub cone, steering wheel central adjustment; external Ø size 350 mm.

Steering wheels

White soft expanded polyurethane steering wheel

45.170.35 Fitted with central hub made of polyurethane lacquered Iroko and mirror polished stainless steel spokes, external Ø size 350 mm. Steering wheels

Steering wheels

Quick-release steering wheel made of soft polyurethane + stainless steel spokes

Grey

45.127.12

Black

45.127.11

Sailing with you, since 1958

Ø mm

Ideal for

280

Tender

45.127.12

White

45.127.13

45.127.11

Rudders

45.127.13

It can be slipped off the pin of the steering system in few seconds. When the tender is stowed in the onboard garage, the wheel often bumps prevents its roof. This device avoids such a problem.

621


45

Steering wheels

Steering wheels with stainless steel spokes Universal cone Ultraflex/Morse/Teleflex. Code

Ă˜ mm

45 - Steering systems

45.135.01 45.135.02 45.135.03 45.135.04 45.135.05 45.135.45 45.136.02 45.151.04 45.136.05 45.151.05 45.137.01 45.137.02 45.137.03 45.137.05 45.137.06 45.137.07

350 350 350 350 350 400 350 350 350 350 350 350 350 350 350 350

45.135.01 - MOD. A

45.135.05/45 - MOD. A

45.136.05 - MOD. B

45.137.06 - MOD. C

622

Steering wheels

Rim Soft polyurethane Soft polyurethane Soft polyurethane Carbon Real wood Real wood Soft polyurethane Soft polyurethane Real wood Real wood with inserts Soft polyurethane Soft polyurethane Soft polyurethane Lacquered Lacquered Soft polyurethane

45.135.02 - MOD. A

45.135.03 - MOD. A

Rim Colour

Model

Black Grey White Carbon Teak Teak Grey Cream Mahogany Mahogany and black Black Grey White Carbon Briar Root Ivory

A A A A A A B B B B C C C C C C

45.137.05 - MOD. C

45.136.01 - MOD. B

45.136.02 - MOD. B

45.136.03 - MOD. B

45.137.01 - MOD. C

45.137.02 - MOD. C

45.137.03 - MOD. C

45.135.04 - MOD. A

45.137.07 - MOD. C

www.versilia.it


Steering wheels

45

Magnifico wheel with oval spokes Stainless steel metal frame. Universal cone. Ø 350

45.177.01 45.177.02 45.177.03 45.177.04 45.177.05

Crown Polyurethane - black Polyurethane - grey Polyurethane - white Teak - matt finish Carbon fibre

Spokes

Ø 350

45.177.21 45.177.22 45.177.23 45.177.24 45.177.25

3 3 3 3 3

45.177.03

Spokes

45.177.04

45.177.05

45.177.24

45.177.25

Steering wheels with mahogany polyurethane lacquered crown

Steering wheel with external teak wheel rim, thick diameter

Made of mirror polished stainless steel, fine finish, 16° spoke inclination.

Stainless steel spokes, anatomically designed

Steering wheels

Code

45.168.35 45.168.40

Steering wheels

Ø mm

grasp crown for better gripping.

Steering wheels

350 400

External Ø mm

45.165.02 45.165.03

45.177.01

400 350

45.177.02

45.177.21

45.177.22

Steering wheels with external teak wheel rim and spokes coated with teak

Stainless steel hub and spokes, central cone “Ultraflex, Morse”. Steering wheels

Steering wheels

Code

45.177.21

4 4 4 4 4

45 - Steering systems

45.177.23

Crown Polyurethane black Polyurethane grey Polyurethane white briar root lacquered look Carbon look

Code

45.167.40 45.167.50

Steering wheels

external Ø mm

400 500

Mirror polished stainless steel steering wheels fitted with 5 spokes Oval boxed crown for a better grip and for a pleasant aesthetic look; universal central cone (Ultraflex, Morse, Teleflex, Tx, Mancini etc.); stainless steel central hub, fine finish, supplied with central black

plastic cap. Code

Steering wheels

Ø mm 320 380 420

Central teak plug OPTIONAL

45.176.00 45.176.00 45.176.00

45.176.00

45.165.32 45.165.37 45.165.41

7 .3 65 .1 5 4

Mirror polished stainless steel steering wheels Suitable for sail boats, no embrasure, fitted with central hub fully made of stainless steel, universal cone (Ultraflex, Tx, Teleflex, Mancini etc.). Steering wheels

Code

45.164.60 45.164.75

Crown Ø mm

600 700

Steering wheels

Code

45.164.90 45.164.10

Crown Ø mm

900 1000

Sailing with you, since 1958

623


45

Steering wheels Steering wheel with teak crown. Stainless steel spokes, crown with rear anatomic design for better gripping. Steering wheels

Code

45.168.01 45.168.02

External Ø mm

Spoke inclination

350 400

15° 15°

Steering wheels with teak external wheel rim Stainless steel.tapered spokes. Steering wheels

Code

45 - Steering systems

Steering wheels

Crown Ø mm

45.167.01 45.167.03 45.167.04 45.167.05

Code

Crown Ø mm

45.167.06 45.167.07 45.167.08

400 500 600 700

800 900 1000

Classic steering wheels Genovese type with 6 or 8 spokes, fitted with perimetrical brass bands, central hub in just one piece, polyurethane lacquered with 8 coats, sealed spokes, very sturdy, all with standard hole size 18 mm, or with Ultraflex. Steering wheels

Code

45.160.37 45.160.42 45.160.49 *

Ø mm

Code

Steering wheels

45.160.52 45.160.60 45.160.70

370 420 490

Ø mm

Code

45.160.80 45.160.10*

520 600 700

Ø mm

830 1000

Without brass rings

Classic steering wheel with stainless steel external rim Technical features are the same of steering wheel model 45.160.xx. The external rim is mounted with a special system without screws. The hub and band are made of chromed brass; the best steering wheel currently available in the market, fitted with cone Ultraflex or Vetus for MT30/50/75/100 upon request. Steering wheels

Code

45.161.42 45.161.52

Ø mm

Code

Steering wheels

45.161.62 45.161.72

420 520

Ø mm

Code

45.161.82

620 720

Ø mm

820

Central cap for steering wheels 45.176.01

45.176.02

Steering wheel accessories

Code

Material

Steering wheels

brass

For steering wheels 45.160.37; 45.160.42

45.176.02

brass

45.160.49; 45.160.52; 45.160.60;

45.176.03 45.176.04

stainless steel stainless steel

45.161.42 45.161.52; 45.141.62

45.176.01

Rear cable steering shaft Made of plastic and metal. Steering systems

45.145.01

624

45.145.02

Code

45.145.01

www.versilia.it

Angle normal 90°

Steering wheels

Code

45.145.02

Angle inclined 20°


ULTRAFLEX Steering wheels

45

ULTRAFLEX Steering wheels ULTRAFLEX "Corsica" steering wheels Soft PVC crown, light alloy spokes. Steering wheels

Code

45.383.30 45.383.34 45.383.93 45.386.47

Spokes Silver Silver Silver Black

45.601.51

Crown Black White Grey Root effect

Ø mm

350 350 350 350

Central hub

45.383.93

45.386.47

45.383.30

45.383.34

45.380.01 45.386.35

Model LINOSA

Ø mm

PONZA

350

45.601.51

350

ULTRAFLEX Steering wheels

Spokes

Silver Silver

Crown

Inserts

Black Silver

Silver -

Central hub

ULTRAFLEX steering wheels "Nisida/Spargi/Burano”

45.384.01

Soft polyurethane crown, light alloy spokes. Steering wheels

ULTRAFLEX Steering wheels

Code

45.384.01 45.384.03

45.380.01

Code

45.386.35

Polyurethane lacquered crown, light alloy spokes. Steering wheels

Model NISIDA

Ø mm

SPARGI

350

350

Spokes

Black Silver

Crown

Inserts

Black Black

-

45.384.03

45 - Steering systems

ULTRAFLEX "Ponza/Linosa”steering wheels

Silver

45.601.51 Central hub

Central ULTRAFLEX steering wheels 45.601.51 For ULTRAFLEX steering wheels, fitted with button and shield Ultraflex. Steering wheel accessories

ULTRAFLEX Steering wheels

Control levers

Box B47 45.047.00 Supplied with kit for all types of cables.Without kit it is suitable for Mercury-engines Remote control boxes

Control levers

Single lever control B89 Universal model, designed for side wall mounting either right of left, recommended for outboard and inboard engines fitted with hydraulic inverter. Compact size, can be fitted into any type of boat, equipped with idle lever locking system, sold with universal Kit, uses all types of cables except for C4 and C22. The kit K35 is required if cables C5 and C16 are used. Remote control boxes

Code

45.452.02BI

Color

Ivory

Control levers

Code

45.452.02NE

Colour

Black

Sailing with you, since 1958

625


Control levers

45

Microswitch X 12 45.012.00 It can be fitted in all Ultraflex boxes (except B47/B400/B401), because this does not enable the ignition unless the engine is neutral. Remote control boxes

Control levers

Diecast and chromed alloy single lever controls

Code

Type Single engine Twin engine

45.103.00 45.104.00

45.104.00

Remote control boxes

45.103.00

Designed for panel mounting. Pull the level outwards to disconnect the inverter during the engine warm up. Equipped with internal friction, they require cables C2/C8/ C0. Safety switch* OPTIONAL

45.043.00 45.043.00

45.104.00

It allows to start the engine on in neutral

*

45.103.00

with single action where each lever control the gas or inverter cable separately; use any type of cable except for C4; supplied ready to use with cables C14/MACH14 - C2/C7/C8/MACHZero. For cables C5/C16/MACH5 ask for kit K60 (45.100.11). For cables C36/MACH36 ask for kit K62 (45.100.12). For cables C22 ask for kit K61 (45.100.13). Control levers

Code

Double lever box 45.100.04* 45.100.06* 45.100.08* 45.100.02 Single lever box 45.100.01 *

Action

Description

single single single double

single engine gas + inverter (B322) twin engine gas only (B322T) twin engine inverter only (B322S) twin engine (B302CR)

double

single engine (B301CR)

45.100.04

Remote control boxes

45.100.02/06/08

45.100.01

Universal size for any type of engine, gas and inverter control function, compact size, made of chromed zamak. Available in double action version with push button inverter disconnection, or

45 - Steering systems

Single lever control boxes “Low Profile�

Special offer

MORSE single lever, series MT The most classical and most used single chromed lever; console mounting, It controls both inverter and idle, while the idle can be used without connecting the gearbox. Remote control boxes

Code

45.095.00

Version

MT 3 Single, single engine

Control levers

Code

45.096.00

Version MT 3 Twin, two engines

Control box suitable for controlling one engine 45.340.02 Made of chromed brass and AISI 316 stainless steel, size 140x120x350 mm; suitable

with cables: C2/C7/C8/C14. Remote control boxes

Control levers

Sailing with you, since 1958

627


45

Control levers

Low-profile bulkhead single-lever control Double action: gas + inverter: Modern and simple design without projections very suitable for sailing boats. Front panel with lever made of AISI 316 stainless steel. Equipped with adjustable clutch. Availability of X41 safety switch to avoid engine ignition when the lever is not in idle position. Matching cables: C2/C8/MACH"0". Remote control boxes

Code

45.452.20

45.452.20

Type B400

Version Mechanical (both gas and inverter)

Single lever control for recess wall mounting Any cable may be used (exceptC22/C36/MACH 36). With cables C5 and C16/MACH 5 kit 35 is required. Suitable for any type of engine. Remote control boxes

Control levers

45.452.04 45.452.05 45.452.06 45.452.08

Version

Abbreviation

with neutral lock with neutral lock and Trim switch sailboat version with neutral lock and Trim switch, black knob

B183 B184 B85 B310B

45.452.09

with neutral lock and Trim switch, brier knob

B310BR

45.452.09

45.452.08

45 - Steering systems

Code

Universal single lever box “Ultraflex B65/B77” Chrome or lacquared body, chromed lever. Uses cables C2/C7/C8/C14, with kit K35 you can also

use cables C5/C16. Remote control boxes

Code

45.252.00 45.252.01 45.252.02 45.252.03

Color

Control levers

Trim control

Model

x x

B73 B65 B77 B76

Painted Chromed Painted Chromed

Twin-lever box twin-engine “Ultraflex B66/B79” Chromed or lacquered body, chromed lever; universal model for outboard and inboard engines, use cables C2/C7/C8/C14 with kit K35 (45.252.35), or also cables Mercury. Remote control boxes

Code

45.253.00 45.253.01 45.253.02 45.253.03

626

www.versilia.it

Color Painted Chromed Painted Chromed

Control levers

Trim control

Model

x x

B74 B66 B79 B78


45

Control levers Twin lever box GEMINI Require cables C2/C7/C8/C0 and C22 with adaptor K22. Angled levers

Straight levers

Remote control boxes

45.350.01-B50 45.350.02-B59DX* 45.350.02-B59SX* *

Hand side right left

45.350.01-B46 45.350.02-B58DX* 45.350.02-B58SX*

Safety lock allows to connect gearbox only at min RPM and to throttle only if inverter is fully connected.

45.350.02

45.350.01

0.01 45.35

45.350.02

45 - Steering systems

Engine control cables Engine control cables

Lenght in feet 05’ 06’ 07’ 08’ 09’ 10’ 11’ 12’ 13’ 14’ 15’ 16’ 17’ 18’ 19’ 20’ 21’ 22’ 23’ 24’ 25’ 26’ 27’ 28’ 29’ 30’ 31’ 32’ 33’ 34’ 35’ 36’ 37’ 38’ 39’ 40’

628

Engine control cables

Tipo C2 C4 C5 C8 C14 C36

For engines for all Suzuki, Mariner, Yamaha, Tohatsu, Selva and Honda outboard and inboard engines F.B. Evinrude, Johnson before 1979 Mercury and Mercruiser inboard and outboard engines inboard engines and stern drives (heavy duty reinforced cable) Johnson, Evinrude engines with stiff terminal, OMC from 1979 to now for all Mercury/Mercruiser engines equipped with Generation II (year 200) radio remote control box

C2

45.002.05 45.002.06 45.002.07 45.002.08 45.002.09 45.002.10 45.002.11 45.002.12 45.002.13 45.002.14 45.002.15 45.002.16 45.002.17 45.002.18 45.002.19 45.002.20 45.002.21 45.002.22 45.002.23 45.002.24 -

C4

45.004.06 45.004.15 45.004.16 -

www.versilia.it

C5

45.005.06 45.005.07 45.005.08 45.005.09 45.005.10 45.005.11 45.005.12 45.005.13 45.005.14 45.005.15 45.005.16 45.005.17 45.005.18 45.005.19 45.005.20 45.005.21 45.005.22 45.005.24 45.005.25 45.005.26 45.005.28 45.005.30 -

C8

45.008.08 45.008.09 45.008.10 45.008.11 45.008.12 45.008.13 45.008.14 45.008.15 45.008.16 45.008.17 45.008.18 45.008.19 45.008.20 45.008.21 45.008.22 45.008.23 45.008.24 45.008.25 45.008.26 45.008.27 45.008.28 45.008.29 45.008.30 45.008.31 45.008.32 45.008.33 45.008.34 45.008.35 45.008.36 45.008.37 45.008.38 45.008.39 45.008.40

C14

45.014.05 45.014.06 45.014.07 45.014.08 45.014.09 45.014.10 45.014.11 45.014.12 45.014.13 45.014.14 45.014.15 45.014.16 45.014.17 45.014.18 45.014.19 45.014.20 45.014.22 45.014.24 -

C36

45.003.06 45.003.07 45.003.08 45.003.09 45.003.10 45.003.11 45.003.12 45.003.13 45.003.14 45.003.15 45.003.16 45.003.17 45.003.18 45.003.19 45.003.20 45.003.21 45.003.22 45.003.24 -


Engine control cables

45

Patented cables series ULTRAFLEX MACHTM High efficiency and flexibility. Engine control cables

Model MACHZero MACH14 MACH36 MACH5 Engine control cables

Lenght in feet

MACH14

MACH36

45.011.13 45.011.14 45.011.15 45.011.16 45.011.17 45.011.18 45.011.19 45.011.20 45.011.22 45.011.24 45.011.26 45.011.28 45.011.30 -

MACH5

45.010.13 45.010.14 45.010.15 45.010.16 45.010.17 45.010.18 45.010.19 45.010.20 45.010.22 45.010.24 45.010.26 45.010.28 45.010.30 -

45.009.13 45.009.14 45.009.15 45.009.16 45.009.17 45.009.18 45.009.19 45.009.20 45.009.22 45.009.24 45.009.26 45.009.28 45.009.30 -

MACHZero

45.000.12 45.000.13 45.000.14 45.000.15 45.000.16 45.000.17 45.000.18 45.000.19 45.000.20 45.000.22 45.000.24 45.000.26 45.000.28 45.000.30 45.000.32 45.000.34 45.000.36 45.000.38 45.000.40

45 - Steering systems

12’ 13’ 14’ 15’ 16’ 17’ 18’ 19’ 20’ 22’ 24’ 26’ 28’ 30’ 32’ 34’ 36’ 38’ 40’

Type universal (as C2/C8) OMC (as C14) Mercury GEN II (as C36) Mercury (as C5)

Steering cable connectors and remote control adapter kits 9B kit for cable connection

K7 kit for cable connection

K60 kit for cable connection

45.180.04 For Yamaha engines 5 HP

45.180.05 For 9,5A/ 1 2A/15A (r.o. 626-48501-00)

45.100.11 For adjusting cables C5, C16, MACH5 to boxes B301 and B302

Engine control cables

Steering cable connectors and remote control adapter kits

Engine control cables Engine control cables

K57 kit for cable connection

K 56 kit for cable connection

45.057.00 For cables C2/C8/C0 on engines Johnson/Evinrude Engine control cables

Steering cable connectors and remote control adapter kits

45.056.00 For adapting cables C2/C8/C0 on Mercury engines Engine control cables

"A.310" kit for cable connection

45.255.09 For mounting cables C2 on engines Yamaha/Mariner Engine control cables

Steering cable connectors and remote control adapter kits

Steering cable connectors and remote control adapter kits

Steering cable connectors and remote control adapter kits

Steering cable connectors and remote control adapter kits

K61 kit for cable connection

45.100.13 For adapting cable C22 to boxes B301

and B302 Engine control cables

Steering cable connectors and remote control adapter kits

K35 kit for cable connection

45.252.35 To use cable C5/C16 on single-lever box 45.252/253 Engine control cables

Sailing with you, since 1958

Steering cable connectors and remote control adapter kits

629


45

Steering cable connectors and remote control adapter kits

K51 kit for cable connection

K62 kit for cable connection

45.051.00 For connecting cables C14 to engines, to be used with single-lever on

45.100.12 For adapting cables C36 and MACH36 to boxes B301 and B302

bulkheads.

Engine control cables

K67

K23, K24, K25 kit for cable connection

Code

Engine control cables

45.047.23 45.047.25 45.047.24

Kit “K23” “K25” “K24”

Steering cable connectors and remote control adapter kits

To be used on B47 with C14 OMC 1979 and later B47 with wire C2/C7/C8/C0 B47 with C4 OMC, Selva, Volvo engines Steering cable connectors and remote control adapter kits

Engine control cables

Steering cable connectors and remote control

Code

45.100.16

To adapt cables C2/C7/C8/MACHZERO to boxes B322/B324

Fork for fixing radio remote control sheaths.

45 - Steering systems

Made of stainless steel, designed for Johnson, Evinrude, Penta, Selva engines. Engine control cables

Steering cable connectors and remote control

Code

Description RIGHT painted in black (506001) LEFT (50621Q)

45.255.01 45.255.02

ULTRAFLEX steering systems - Rotary steering systems Rotary steering System T 67 Suitable for outboard engines up to 55 HP, can also be used with Morse C230/231, Teleflex, Compact, TX805.

Box only with clutch and cover 90° black

Steering systems

M58 cable only

ULTRAFLEX steering systems - Rotary steering

45.067.00

45.067.XX *

45.595.13/14/15/ Terminals and brackets for any kind of steering wheel from this catalogue. 16/17/18/19 * Pls check the detailed table here below to choose the right product depending on the length needed.

Cable M58 For control box (model 45.067.00) Steering systems

Code

45.067.07 45.067.08 45.067.09 45.067.10 45.067.11

Length 7’ 8’ 9’ 10’ 11’

ULTRAFLEX steering systems - Rotary steering systems

Code

Length 12’ 13’ 14’ 15’ 16’

45.067.12 45.067.13 45.067.14 45.067.15 45.067.16

Code

Length 17’ 18’ 20’ 22’

45.067.17 45.067.18 45.067.20 45.067.22

Rotary steering system T 71 For outboard engines, stern drive engines up to 9/10 meters and speed up to 50 MPH, 4 steering cycle, curve radius minimum cable 200 mm, stroke 228 mm. Steering systems

Control mech only

45.055.02

ULTRAFLEX steering systems - Rotary steering systems

90°

45.055.00

45.185.XX*

45.055.02

Cover 20° 45.055.03

45.595.13/14/ Engine side terminals and brackets for any kind of steering wheel 16/17/18/19 from this catalogue. *

Pls refer to the detailed table at the end of the rotating system range to choose a cable of the right length.

45.055.03

630

M66 cable only

www.versilia.it


ULTRAFLEX steering systems - Rotary steering systems

45

Rotary steering system T 85 For outboard, inboard and SX-drive engines up to 9/10 meters and maximum speed of 50 MPH, steering cycle 3, minimum curve radius 200 mm, stroke 228 mm. Steering systems

ULTRAFLEX steering systems - Rotary steering systems

Control mech and cover 90°

45.185.00

M66 cable 45.185.XX *

45.595.13/14/15/ Terminals and brackets for any kind of steering wheel from this catalogue. 16/17/18/19 *

Pls refer to the detailed table at the end of the rotating system range to choose a cable of the right length.

Rotary steering system T 72 Designed for heavy power, hulls up to 10.50 meters and speed of over 50 MPH. Same features as model T71, but it works with two cables M66. "T 72" control box only

M66 cable only

Steering systems

45.072.00

ULTRAFLEX steering systems - Rotary steering systems

90° 45.055.02

45.185.xx *

Cover

20° 45.055.03

*

45 - Steering systems

45.595.13/14/15/ Optional terminals and brackets to be choosen 45.595.13; 45.595.14; 45.595.15; 45.595.16; 45.595.17; 45.595.18; 45.595.19. It could be used with any kind of ste16/17/18/19 ering wheel from this catalogue. Pls refer to the detailed table at the end of the rotating system range to choose a cable of the right length.

Non reversible rotary steering system T 73 Designed for hulls up to 9/10 meters and speed up to 50 MPH. This system allows you to leave the steering wheel without having the propeller cause vibration to the hull. Steering systems

"T 73" control box only

M66 cable only

ULTRAFLEX steering systems - Rotary steering systems

Cover

90°

45.073.00

45.185.xx *

20° 45.055.03

45.055.02

45.595.13/14/15/ Optional terminals and brackets for any kind of steering wheel from this catalogue. 16/17/18/19 *

Pls refer to the detailed table at the end of the rotating system range to choose a cable of the right length.

Rotary steering system with adjustable wheel orientation Steering systems

ULTRAFLEX steering systems - Rotary steering

Box

Model

Version

M66 cable only

90° shaft adaptable

T 81

single for boats up to 9/10 metrers

45.185.xx *

45.038.00

45.082.00**

T 82

double cable for boats up to 10,50 and max speed above 50 MPH

45.185.xx *

45.038.00

45.083.00

T 83

single no feedbackfor boats up to 9/ 45.185.xx * 10 meters

45.038.00

45.084.00**

T 84

45.081.00

double cable not reversable for boats up to 10,50 meters and max sped above 50 MPH

45.185.xx *

45.038.00

45.595.13/14/15/ Terminals and brackets for any kind of steering wheel from this catalogue. 16/17/18/19 *

Pls refer to the detailed table at the end of the rotating system range to choose a cable of the right length.

**

Special offer

45 .0 38 .0 0

Cable M66 Can also be used as replacement for cables Teleflex SAFE-T Code

Steering systems

45.185.07 45.185.08 45.185.09 45.185.10 45.185.11 45.185.12 45.185.13

Length 7’ 8’ 9’ 10’ 11’ 12’ 13’

Code

45.185.14 45.185.15 45.185.16 45.185.17 45.185.18 45.185.19 45.185.20

Length 14’ 15’ 16’ 17’ 18’ 19’ 20’

ULTRAFLEX steering systems - Rotary steering systems

Code

45.185.21 45.185.22 45.185.23 45.185.24 45.185.25

Length 21’ 22’ 23’ 24’ 25’

Sailing with you, since 1958

631


45

Steering system accessories

Steering systems Straight line steering system T86 Suitable for outboard boats up to 9 mt and inboard boats up to 10,5. The system consists of a steering box already fitted with cable (TM86) and has to be equipped with G86 shaft (45.059.00) and OPTIONAL 90° (45.055.02) or 20° (45.055.03) hub cap. Steering systems

T 86 control mech + different length cables

Cable length

45.059.12 45.059.13 45.059.14 45.059.15 45.059.16

Cable length

45.059.17 45.059.18 45.059.19 45.059.20 45.059.21

12’ 13’ 14’ 15’ 16’

45.059.00 45.055.02 45.055.03

45.055.02

45.055.03

45 - Steering systems

T 86 control mech + different length cables

17’ 18’ 19’ 20’ 21’

T 86 control mech + Cable length different length cables

45.059.22 45.059.23 45.059.24 45.059.25

22’ 23’ 24’ 25’

G86 shaft unit 90° cover 20° cover For the complete steering system, order the following items: 45.059.xx+45.059.00+45.055.02/03

45.059.00 Shaft unit G86 Steering systems

Steering system accessories Return rod

Stainless steel eyelet terminal

45.146.01 For steering gear with single cable, adjustable, univeral model fits all steering gear and outboard engines, supplied with terminals 45.044.00 and 45.148.00 Outboard engine controls

45.148.00 Used to convert cables with terminals threaded with eyelet terminal, suitable for steering gear Ultraflex and Mancini. Thread 10 MA, hole 9,1 mm Outboard engine controls

Steering system accessories

Steering system accessories

Terminal A73

Coupling A44

45.595.16 For cables on engines Mercury, Mariner, Yamaha, Suzuki, Tohatsu, Force and Honda

45.044.00 For cables with terminal thread Outboard engine controls

Outboard engine controls

Adaptor K46

45.046.00 For converting cables with threaded terminal (M47), cables with bayonet terminal (M6645.185.10)

Adaptor

Adaptor K66

45.054.00 To use cables M47 with terminals Morse

806TX Outboard engine controls

Steering system accessories

Plate

Selector (L23)

45.545.03 For fitting steering gear onto engines

45.549.00 For double steering station, use to connect cables with single lever boxes as well as with traditional boxes

Yamaha/Mariner

632

www.versilia.it

45.053.00 For convert cables M66 into cables M47 with a threaded terminal Outboard engine controls

Steering system accessories

Bracket S39

45.595.13 Stainless steel stern bracket Outboard engine controls

Steering system accessories


Steering system accessories Terminal A74SS

Terminal A75

45.595.18 For engine fitting on cables without passing on the dinghy

45.595.17 For single cables on OMC Outboard engine controls

Steering system accessories

Stainless steel bracket

Stainless steel bracket

45.595.14 S40 stainless steel bracket.

45.595.15 S55 stainless steel bracket

Steering system accessories

Outboard engine controls

Steering system accessories

Stainless steel bracket

45.595.19 S61 stainless steel bracket Outboard engine controls

Terminals for cables C2/C7/C8/C0 Outboard engine controls

Type

L25 L7 L12 L26

Suitable for cables C2 - C7 - C8 - MACH ZERO C2 - C7 - C8 - MACH ZERO C2 - C7 - C8 - MACH ZERO C22

45.026 .00

Code

45.488.01 45.488.05

Type

Steering system accessories

L3 with bracket L14 with fork

Suitable for cables C2 - C7 - C8 - MACH ZERO C2 - C7 - C8 - MACH ZERO

45.488.05

Cable sheath holder Outboard engine controls

45.488.04

45.488.02 45.488.03 45.488.04 45.026.00

45.488.02 Steering system accessories

45.488.01

45 - Steering systems

Code

Steering system accessories

45.488.03

Outboard engine controls

45

Device for mounting single cable steering gears 45.147.00 Device designed for mounting single cable steering gears on motorized dinghies with

outboard engines that are not made-ready to house single cables onto the boat’s steering; this device avoids having to mount the steering gear cable onto the dinghy’s transom; universal model, made of anodized light alloy, fitted with a plate model 47.763.92 + adjusting clamp + steering gear mounting pipe + small screw-in nylon bushings. Outboard engine controls

Steering system accessories

Mounting clamp for steering gear pipe 45.147.01 Just mounting clamp for steering gear pipe, designed for mounting onto the transom, apart from plate 47.763.92. Supplied with stainless steel mounting lag bolt. Outboard engine controls

Steering system accessories

Coupling bars Coupling rod 45.560.00 Stainless steel with ball terminal joints, used to connect the main engine with an

auxiliary one; the auxiliary steering can be handled with the boat steering system. Adjustable length from 45 to 60cm, easy to remove thanks to its spring ball fitting.

Engine coupling rod

Coupling bars

Sailing with you, since 1958

633


45

Outboard tiller extensions

Outboard tiller extensions Extension tiller for outboard engines Version fitted with patented snap-in locking system; universal model, anodized light alloy pipe, rubber hand grip and nylon lock.

45.156.05

Outboard engine controls

Outboard tiller extensions

Code

Version standard with ground push button included in the handle telescopic

45.156.05 45.158.01 45.159.00

Length cm

60 60 55/95

45.158.01

45.159.00

Extension tiller for outboard engine steering Wing nut mounting. Universal model made of anodized light alloy, equipped with handgrip and nylon locking system.

45.155.80/81

Extension

45.155.80 45.155.81 45.155.86

45.155.86

Version

Length cm

Fixed Fixed Telescopic

66 76 61 / 100

Vetus hydraulic steering systems for inboard engines VETUS steering systems Made fully of rust-proof material according to advanced techniques, EC type-approved. Twin control

Simple control

45 - Steering systems

Code

The measurement of the steering systems is just an indication. The choise shall keep into account the hull size, the engine power, the rudder size, the hull weight and type. Please, let us know all the above mentioned data to allow us recommend you the most suitable steering system. Hydraulic steering systems

Code

45.030.10 45.045.10 45.045.20* 45.080.10 45.080.20* 45.110.10 45.110.20* 45.140.10 45.140.20* *

Type

Station

MT 30 MT 52 MT 52 MT 72 MT 72 MT 125 MT 125 MT 175 MT 175

single single double single double single double single double

Boat length

8 10 10 12 12 14/15 14/15 16/17 16/17

Torque kgm

30 52 52 72 72 125 125 175 175

Rudder turns

3.4 3.5 3.5 4.9 4.9 6 6 8.5 8.5

Vetus hydraulic steering systems for inboard engines

Stroke mm

Tiller angle Tiller length degrees mm

150 160 160 225 225 160 160 225 225

70 70 70 70 70 70 70 70 70

129 140 140 196 196 140 140 196 196

Pump

Cylinder

HTP20 HTP3010 HTP3010 HTP3010 HTP3010 HTP4210 HTP4210 HTP4210 HTP4210

MTC30 MTC52 MTC52 MTC72 MTC72 MTC125 MTC125 MTC175 MTC175

Cylinder volume c.c.

67 104 104 146 146 253 253 356 356

Joints 45.028.18-19

4 14 4 14 4 14 4 14

"T"

Fitted with check valve

Important: A) The Vetus steering gears, except for model 45.030.10, can be installed with flexible pipe R7 5/16 (45.028.14) or with copper pipe 10x8 mm. The copper pipe doesn’t require additional joints, the flexible pipe requires joint models 45.028.18-19 according to the quantity shown beside the steering systems

B) Steering gear 45.030.10 uses nylon or copper pipe size 6x8

.10 030 45.

45.045.10

45.080.10

45.030.10

45.110.10

634

0.10 0/14 10.1 45.1

0.10 0/08 45.1 45.0

www.versilia.it

45.140.10

2 2 2 2


Hydraulic steering systems for outboard engines

45

Hydraulic steering systems for outboard engines

CE approved, suitable for all engine. Assembled with one pump and 1 or 2 actuators. Need to buy separate the hydraulic fittings (45.025.18/19) and hose R7 (45.028.14)

Vetus hydraulic steering systems for outboard engines Hydraulic steering systems

Code

45.035.40 45.085.10

Hydraulic steering systems for outboard engines

Station

Single engine

Twin engine

single single single

x x -

x

Max HP

Pump

150 HTP2010R 225 HTP3010R 450 HTP4210R

Front cylinder balanced

With pipe 45.028.14 No of joints No of T 45.028.18-19 joints needed needed

OBC150 OBC225 OBC225(2)

4 4 12

45 - Steering systems

45.085.20 Components and spare parts for Vetus hydraulic steerings, outboard engines 45.035.42 Pump only - type HTP2010R 45.085.11 Pump only - type HTP3010R 45.085.13 Pump only - type HTP4210R 45.035.43 Pump only - type OBC150 45.085.12 Pump only - type OBC225

2

Components and spare parts for hydraulic steering system Vetus Pump for VETUS steering system Hydraulic steering systems

Code

45.030.11

Type HTP20

Code

Components and spare parts for hydraulic steering system Vetus

Type HTP3010

45.045.11

Code

Type HTP4210

Code

Type MTC175

45.110.11

Cylinder for VETUS steering system Hydraulic steering systems

Code

45.030.12 45.045.12

Type MTC30 MTC52

Code

Components and spare parts for hydraulic steering system Vetus

45.080.12 45.110.12

Type MTC72 MTC125

45.140.12

Stainless steel flange (HTPF2) for VETUS steering systems 45.126.40 To remove and fit pumps HTP size 74 mm Hydraulic steering systems

Components and spare parts for hydraulic steering system Vetus

Tap BYPASS

Check valve

Hydraulic steering systems

Code

Components and spare parts for hydraulic

45.126.20

Type for single or double station MT30/52/72/125/175

45.126.30

for Hi Load steering system with pipes mm 18x15

45.045.05 For hydraulic steering gears 45.045.10; 45.045.20; 45.080.10; 45.080.20; 45.110.10; 45.110.20; 45.140.10; 45.140.20 Hydraulic steering systems

Components and spare parts for hydraulic steering system Vetus

Hose kit It is used in the last section of the connection to the cylinder during installation of steering systems with copper pipe. Hydraulic steering systems

Code

Description

45.045.06

straight connections

45.045.07

straight + angled connections

Content RF 1.5-m hose 45.028.14; 4 x connections 45.028.18; 2 x 10/10 connections 1046000004.

RF 1.5-m hose 45.028.14; 2 x connections 45.028.18; 2 x connections 45.028.19; 2 x 10/10 connections 1046000004.

Sailing with you, since 1958

635


45

Components and spare parts for hydraulic steering system Vetus Recoverable copper joints Used to connect nylon pipe size 5/16 (45.028.14 or similar) standard for steering gears. Code

Type straight

Hydraulic steering system accessories

45.028.18

Code

Type 90°

Components and spare parts for hydraulic steering system Vetus

45.028.19

Rudder coupling rods Two stud mounting and two dowels, two fixing holes size 129 and 180 mm in order to be used on various types of steering gear. Outboard engine controls

Code

Components and spare parts for hydraulic steering system Vetus

For rudder shaft Ø mm

45.029.01

Code

For rudder shaft Ø mm

45.029.02

30

40

ULTRAFLEX Hydraulic Steering for outboard motors up to 150 HP Front pump UP20 F and UP20 T For boats with maximum power 150HP or inboard boats up to 9 mts. Max speed 25 kts. Hydraulic steering system accessories

Version

Mounting

Cylinders

45.270.01 45.270.02*

UP20 F UP20 T

frontal frontal/adjustable

5 5

*

45.027.00 45.290.35-40-45-50-55-60-65-70 45.038.00

Recessed flange OPTIONAL 45.270.03

Relief valve bar

Capacity c.c.

Ø max st.wheel (mm)

50 50

20 20

508 406

Steering systems to be completed with: oil, 2 litres flexible hose kit kit X52 for adjustable slope of the steering wheel 45.270.03 + 45.270.01

45.270.01

45.270.01

45.270.03

45 - Steering systems

Code

45.270.02 + 45.038.00

45.270.02 + 45.038.00

Hydraulic cylinders CYLINDER APPLICATIONS 45.271.01/02

Hydraulic steering systems

45.271.01/02

MODEL

MERCURY and MARINER

F50 EFI - F60 EFI 4T F75 - F90 4T 115 EFI 4T 75-90-115 Optimax 2T 135-150 Optimax 2T 75-90 2T

45.271.01/02

ENGINE

ENVIRUDE YAMAHA HONDA

45.271.02

SUZUKI TOHATSU-NISSAN SELVA TOHATSU Code

45.271.01

45.271.01 45.271.02 45.271.04 45.271.06 45.271.06

All All BF75-BF90 4T BF115-BF130 4T BF135-BF150 4T BF90-BF150 V-TEC 4T All All All All

Type

Application

Mounting

Balanced

UC94-OBF/1 UC94-OBF/3 UC68-OBS UC69-I

outboard outboard outboard inboard

front front side side

yes yes no no

ULTRAFLEX Hydraulic Steering for outboard motors up to 150 HP

CYLINDER UC94-OBF/1 UC94-OBF/1 UC94-OBF/3 UC94-OBF/1 UC94-OBF/1 UC94-OBF/1 UC94-OBF/1 UC94-OBF/1 UC94-OBF/1 UC94-OBF/1 UC94-OBF/3 UC94-OBF/1 UC94-OBF/1 UC94-OBF/1 UC94-OBF/1 UC94-OBF/1 UC94-OBF/1 Volume c.c. 94 94 68 68

Thrust kg 278 278 168 168

Steering systems to be completed with:

45.027.00 45.290.35/40/45/50/55/60/65/70

oil, 2 litres flexible hose kit

45.271.06

45.271.04 45.271.04

636

YEAR 1990 - 2008 1990 - 2007 2004 - up to now 1999 - up to now 2004 - up to now 2000 - up to now 2007 - up to now 1995 - up to now 1998 - up to now 2005 - up to now 2008 - up to now -

www.versilia.it

Joints

3/8" 3/8" 3/8" 3/8"


45

ULTRAFLEX Silversteer hydraulic steering for outboard motors up to 350 HP

ULTRAFLEX Silversteer hydraulic steering for outboard motors up to 350 HP The system works under very high pressure (1500 PSI) by means of special pumps, cylinders, hoses, and custom designed check valves. Eliminates delays in steering response.

Hydraulic pump Equipped with check valve Hydraulic steering

Code

45.275.01 45.275.02 45.275.03

ULTRAFLEX Silversteer hydraulic steering for outboard motors up to 350 HP

Type

Mounting

Capacity cc/rev.

Pistons

Pressure bar

Ă˜ max. steering wheel mm

UP28 FSVS UP33 FSVS UP39 FSVS

front front front

28 33 39

5 7 7

105 (1500 psi) 105 (1500 psi) 105 (1500 psi)

710 710 710

Hydraulic piston With adjustable joints and ULTRABOLT high-resistance connecting bolt. Hydraulic steering gears

ENGINE

MODEL

YEAR

CYLINDER

MERCURY and MARINER

All

-

UC128/1-SVS

All

-

UC128/2-SVS

YAMAHA

115C - 130B 2T 150F - 200F - 250G 2T 150 HPDI VMAX 2T F115 - F150 EFI 4T F200 - F225 - F250 4T F115 - F150 F200 - F225 - F250 - F300 - F350 4T

1998 - 2008 1996 - 2007 2000 - 2008 2000 - 2008 1999 - 2007 2002 - 2007 2004 - up to now 2006 - up to now

UC128/2-SVS UC128/2-SVS UC128/2-SVS UC128/2-SVS UC128/1-SVS UC128/2-SVS UC128/1-SVS UC128/2-SVS

HONDA

BF115 - 130 4T BF135 - 150 4T BF150 V-TEC 4T BF175 - BF200 - BF225 4T

1998 - up to now 2005 - up to now 2008 - up to now 2001 - up to now

UC128/3-SVS UC128/1-SVS UC128/1-SVS UC128/1-SVS

SUZUKI

DF100 - 115 - 140 4T DF150 - 175 4T DF200 - DF225 - DF250 - DF300

1998 - up to now 2006 - up to now

UC128/1-SVS UC128/1-SVS UC128/2-SVS

TOHATSU

115 - 120 - 140 2T 70 - 90 - 115 TLDI 4T

2004 - up to now 2004 - up to now

UC128/2-SVS UC128/1-SVS

SELVA

80 PORTOFINO / TIGERSHARK 2T 150 WHITE SHARK 2T 100 EFI MARLIN - 115 EFI NARWHAL 150 EFI KILLER WHALE 4T

1995 - 2008 2001 - 2007 2000 - up to now

UC128/2-SVS UC128/1-SVS UC128/2-SVS

JOHNSON

BJ90 - 115 - 140 4T J90 - 115 V4 2T J150 - 175 V6 2T J200 - 225 V6 4T

2001 - 2007 1995 - 2007 1995 - 2007 2004 - 2007

UC128/1-SVS UC128/2-SVS UC128/2-SVS UC128/2-SVS

ULTRAFLEX Silversteer hydraulic steering for

Code

45.276.01*

Type

Mounting

Volume cc

Thrust kg

Stroke mm

Joints

UC 128/2 - SVS

Front right

120

450

185

3/8

45.276.02* UC 128P/2 - SVS 45.276.03 *

UC128/1 - SVS

Front left

120

450

185

3/8

-

120

450

185

3/8

45 - Steering systems

ENVIRUDE

45.276.02

45.276.01

Schema d'impianto per bimotore doppio cilindro

They can be used with the following high-power engines: Yamaha 4 S 200/225/300/350 - Johnson/Evinrude 200/225/250 2S - Suzuki 200/225/250/900 4S - Honda 200/225 (ask for diffeent connection bracket 128/1).

Applicazione timonerie SILVER STEER Technical specifications and order indications ULTRAFLEX Silversteer hydraulic steering for outboard motors up to 350 HP

FOR SYSTEM

Single cylinder singleengine

Single cylinder twinengine

Applications

up to 350 hp max

Non contra rotating engines up to 350 hp max Contra rotating engines up to 600 hp max

Double cylinder twinengine

Non contra rotating engines up to 600 hp max Contra rotating engines up to 700 hp max

Steering wheel rotations

4,3 (UP28) 3,6 (UP33)

4,3 (UP28) 3,6 (UP33)

6,1 (UP33)

Components

Code

Model

Q.ty

Cylinder Pump pipe kit Oil

45.276.01/02 45.275.01/02 45.277.xx 45.027.00

UC128-SVS UP28 o UP33-SVS Kit OB-SVS 45.027.00

1 1 1 1

Cylinder Pump pipe kit Oil Connecting rod

45.276.01/02 45.275.01/02 45.277.xx 45.027.00

UC128-SVS UP28 o UP33-SVS Kit OB-SVS 45.027.00 A94

1 1 1 1 1

UC128-SVS UC128P-SVS UP33-SVS KIT OB-SVS 45.027.00 A90 KIT OB-2C-SVS

2 1 1 2 2 1

Cylinder Cylinder port Pump pipe kit Oil Connecting rod Connection kit

Sailing with you, since 1958

45.276.01/02 45.275.03 45.277.xx 45.027.00 45.156.11

637


45

ULTRAFLEX Sydraulic Steering for medium and high power inboard motors ULTRAFLEX "Gotech" universal hydraulic steering kit for outboard motors up to 115 HP

45.273.00

Corresponds to the norms 95/25 CE and ISO 10592 Supplied in kit containing: - Helm Pump UP18 semi recessed with non-return valve, and relief valve. Displacement/Revolution 18CC; Relief valve setting 55 bar. Maximum wheel Ø 508mm - Cylinder UC81-OBF universal balance. Volume 81cc, Output force 222 kg, Stroke 186mm, Connector 3/8" - 2 x 6 m flexible pipes 1/4" (can be shortened if necessary). Complete with terminal connectors - 2 litres hydraulic oil

45.273.00

Code

45.2 73.0 0

Description GOTECH Kit

45.273.00 45.290.20 45.290.22 45.290.23

45.273.00

Nut with 3/8" sleeve (61 CA) Rotating connector (AF90) for all ULTRAFLEX pumps Tee Connector 3/8" (TF38)

Made using the latest technology with 100% rust proof materials that meet with the Directive 94/25 EC and ISO 10592 standards. Interchangeable with equivalent to Hydraflex and Teleflex Seaster; comes with elbow connectors1/4 NPT for pipe size 3/8”. Hydraulic pumps Fitted with check valve. Circuit schematic for

Hydraulic steering system accessories

ULTRAFLEX Sydraulic Steering for medium and

Code

45.280.00 45.280.01 45.280.02 45.280.03 45.280.33 45.280.04 45.280.07 45.280.08

45.280.00/01/02/03

45 - Steering systems

ULTRAFLEX Sydraulic Steering for medium and high power inboard motors

45.270.08 45.270.07

Initials

Mounting

UP25F UP28F UP33F UP39F UP45F UP33R UP28R UP39R

front front front front front rear-dashboard rear-dashboard rear-dashboard

Flow per turn Pistons cc

25 28 33 39 45 33 28 39

Pressure bar

Max st.wheel Ø mm

70 70 70 70 70 70 70 70

710 710 710 710 710 710 710 710

5 5 5 7 7 7 5 7

5 5 5 5 5 5 5 5

X68 chromed flange for hydraulic pumps "F" kit for easier filling up and cleaning of hydraulic pumps

45.280.04

45.270.07

45.280 .04/07 /08

45.270.08

45.270.07 kit

Flanges for hydraulic steering gears Ultraflex Code

Type square flange (x64) round flange (x57)

Hydraulic steering system accessories

45.270.03* 45.280.10 *

45.280.10

45.270.03

45.270.03

45.270.03

Kit X52

Made ready for mounting kit X52, wheel inclination.

Code

45.281.01 45.281.02 45.281.03 45.281.04

638

Initials UP28T UP33T UP39T UP45T

ULTRAFLEX Sydraulic Steering for medium and

Mounting semi-recessed semi-recessed

similar look to Hydraflex

Hydraulic pumps

Hydraulic steering system accessories

ULTRAFLEX Sydraulic Steering for medium and high power inboard motors

Flow per turn cc 28 33 39 45

Pistons 5 5 7 7

Pressure bar 70 70 70 70

www.versilia.it

Max st.wheel Ø mm 710 710 710 710

5 5 5 5

45.038.00 Designed to adjust and incline the steering wheel for a total of 48° Hydraulic steering system accessories

ULTRA


45

ULTRAFLEX Sydraulic Steering for medium and high power inboard motors Outboard engine hydraulic cylinders Hydraulic steering system accessories

ULTRAFLEX Sydraulic Steering for medium and

Mounting

Balanced

Volume cc

Thrust kg

Stroke mm

Pipe joints

Type

45.282.00

front right

yes

120

450

185

3/8"

UC-128-OBF/1

45.282.01

front right

yes

120

450

185

3/8"

UC-128-OBF/2

45.282.11

front left

yes

120

450

185

3/8"

UC-128P OBF/1

45.282.12

front left

yes

120

450

185

3/8"

UC-128P OBF/2

45.282.03

side

no

132/163

455/563

203

3/8"

UC 132 OBS

Code

45.282.00-01 45.282.11/12

45.282 .03

45.282.12

45.282.00 (UC 128/1 - SVS) 45.282.03 45.282.11

45.282.01 (UC 128/2 - SVS)

Hydraulic steering system accessories

Code

ULTRAFLEX Sydraulic Steering for medium and high power inboard motors

Type

45.282.21 45.282.22 45.282.23 45.281.24 45.281.25

For UC-128-OBF/1 UC-128-OBF/2 UC-128-OBF/3 UC-128P-OBF/1 UC-128P-OBF/2

LA 1 LA 2 LA 3 LA1P LA2P

45.282.21

45.282.22

45.282.23

45.281.24

45.281.25

Coupling rods For outboard engines, made of stainless steel. Code

Steering systems

Type

Engine to engine mm

45.156.08

hydraulic/mechanical

A92, easily adjustable, for small spaces

550/700

45.156.09

hydraulic/mechanical

A92, easily adjustable, for small spaces

700/950

45.156.10

hydraulic/mechanical hydraulic

A88 A90, to be used with double front

650/950

45.156.11

Outboard engine controls

ULTRAFLEX Sydraulic Steering for medium and

*

45.156.08/09/10

45.156.11

hydraulic cylinders (45.282.00-01)*

45 - Steering systems

Return rod Kit This allows to adapt cylinders 45.282.00-01-11-12 to different engines. I.E. if engine has been replaced and cylinder not.

45.156.11

The cylinders must always be LH and RH

Kit OB-2S

Code

Hydraulic steering system accessories

45.290.15

Kit 95-25

3/8" hose by the metre

Hydraulic steering system accessories

Description For additional station or for automatic pilot installation. It includes fittings and 8 metres of 3/8" nylon hose for compensation line.

ULTRAFLEX Sydraulic Steering for medium and high power inboard motors

Code

ULTRAFLEX Sydraulic Steering for medium and high power inboard motors

Description

45.290.16

second station joints

45.291.00 Sold per metre. Hydraulic steering system accessories

Kit 2 flexible pipes Blended for ouboard steering gears Ultraflex. High pressure pipes

Code

45.290.35 45.290.40 45.290.45

Length m

3.5 4 4.5

Code

45.290.50 45.290.55 45.290.60

ULTRAFLEX Sydraulic Steering for medium and high power inboard motors

Length m

5 5.5 6

Code

45.290.65 45.290.70 45.290.80

Length m

6.5 7 8

Pair of SILVER STEER high-pressure hoses Hydraulic steering, nylon hoses

Code

45.277.55 45.277.60 45.277.65

ULTRAFLEX Sydraulic Steering for medium and

Type OB-SVS 55 OB-SVS 60 OB-SVS 65

Length m

5.5 6 6.5

Code

45.277.70 45.277.80

Type OB-SVS 70 OB-SVS 80

Length m

7 8

Sailing with you, since 1958

639


45

ULTRAFLEX Sydraulic Steering for medium and high power inboard motors Kit including 2 high-resistance reinforced hoses, already jointed for double cylinder and double engine connection Connected with rotating nuts and stiffening sleeves. To combine with bulkhead cross 45.028.28; 45.028.30. Code

Length cm 70 90 120

Radio remote control cables

ULTRAFLEX Sydraulic Steering for medium and high power inboard motors

45.290.11 45.290.12 45.290.13

Bulkhead troughout twin bush, waterproof

8 8.2 .02 45

6 8.2 .02 45

Code

Base colour

Hydraulic steering system accessories

45.028.24 45.028.26 45.028.28 45.028.30

0 8.3 .02 45

For pipes pass through pass through twin connection twin connection

45.028.24/26

45.028.28/30

45.028.24

45 - Steering systems

ULTRAFLEX Sydraulic Steering for medium and high power inboard motors

White Chromed White Chromed

Hydraulic cylinders for inboard engine steerings Trimmed version Hydraulic steering system accessories

Code

45.284.01 45.284.02 45.284.03 45.284.05

ULTRAFLEX Sydraulic Steering for medium and high power inboard motors

Volume cc

Torque kgm

Power kg

Run mm

Nylon pipe joints

Balanced

116 168 215 293

58 87 111 146.5

464 673 673 1155

178 178 228 228

3/8" 3/8" 3/8" 3/8" nylon

yes yes yes yes

A

B

178 178 228 178

C

155 155 199 163

127 127 163 134

Dimension mm D E

464 506 582 506

102 106 131 107

F

G

40 40 40 40

73 105 105 125

45.284.01/02/0 3

45.284.0 5

Hydraulic steering cylinders for inboard engines Trimmed version Hydraulic steering system accessories

Code

45.286.04

45.286.01 45.286.04* *

Volume cc 132

Torque kgm 66

132

66

ULTRAFLEX Sydraulic Steering for medium and high power inboard motors

Power kg 464

Run mm 203

Nylon pipe joints 3/8"

464

203

3/8"

For Volvo stern drives power assisted steering series DP-E / DP-G

45.286.01

45.286.04

45.286.01

Hydraulic steering system accessories High pressure nylon pipe size 5/16� R7

Nylon hose

45.028.14 Suitable for hydraulic steering gear Vetus except for model 45.030.10. 24 meter coils.

Codice

Ă˜ mm 6x8

Hydraulic steering system accessories

45.027.99

Roll m 25

Bulkhead troughout bush Hydraulic steering system accessories

Code

45.028.22 45.028.23

640

www.versilia.it

Material Black Nylon

Black Nylon with stainless flange

For hydraulic hose

45.028.14 45.028.14


Hydraulic steering system accessories Oil for hydraulic steering units

Oil can “Lubrimar”

65.089.00 Suitable for topping up; supplied in a 250 cc. pack.

45.027.00 Special for hydraulic steering gears, 2 litre container.

45

Copper pipe Copper pipes

6x8

45.028.11

Ø mm 8x10

Roll m 10x12

45.028.10

45.028.12

50

Technical specifications and how to order steering wheels HOW TO ORDER ITEM 45.282.01 ENGINE

MODEL

RACING 300 115-125-150 EFI 2T 225-250 EFI 2T 75-90-115-125 OPTIMAX MERCURY e 135-150-175 OPTIMAX MARINER 200-225-250 OPTIMAX 100-115 EFI 4S 250 SALTWATER EFI 4S 135-150-175-200 VERADO L4 BF75-90 4S BF115-130 4S HONDA BF135-150 4S BF90-BF150 V-TEC 4S BF175-200-225 4S DF70-80-90 4S DF100-115-140 4S SUZUKI DF150-175 4S

JOHNSON

YEAR

CYLINDER

1990 - 2007 2000 - 2007 2004 - up to now 1999 - up to now 1999 - up to now 2007 - up to now 2007 - up to now 1995 - up to now 1998 - up to now 2005 - up to now 2008 - up to now 2001 - up to now 1998 - up to now 2008 - up to now

UC128OBF1 UC128-OBF/1 UC128-OBF/1 UC128-OBF/3 UC128-OBF/1 UC128-OBF/1 UC128-OBF/1 UC128-OBF/1 UC128-OBF/1 UC128-OBF/1 UC128-OBF/3 UC128-OBF/1 UC128-OBF/1 UC128-OBF/1 UC128-OBF/2 UC128-OBF/1

2006 - up to now

UC128-OBF/1

2001 - 2007 1995 - 2007 1995 - 2007 2004 - 2007

UC128-OBF/2 UC128-OBF/1 UC128-OBF/2 UC128-OBF/2 UC128-OBF/2

DF200-DF225-DF250-DF300 BJ90-115-140 4S J90-115 V4 2S J150-175 V6 2S J200-225 V6 4S

SYSTEM

ENGINE

YAMAHA

EVINRUDE

SELVA

TOHATSU

MODEL

YEAR

CYLINDER

75C-90 2S 115C-130B 2S 150F-200F-250G 2S 150HPDI VMAX 2S 175-200-225-250-300HPDI VMAX 2S F90-F100-F115-F150 EFI 4S F200-F225-F250 4S F115-F150 F200-F225-F250-F300 4S E75-E90 2S E115-E130-E135E 2S V4 E150-E175-E200 2S V6 E200 HO-E225-E250 2S V6 E250HO-E300 2S V6 80 PORTOFINO/TIGERSHARK 2S 150 WHITE SHARK 2S 100 EFI MARLIN - 115 EFI NARWHAL 150 EFI KILLER WHALE 4S 115-120-140 2S 70-90-115 TLDI 4S

1998 - 2008 1990 - 2008 1996 - 2007 2000 - 2008 2000 - 2008 1999 - 2007 2002 -2007 2004 - up to now 2006 - up to now 2004 - up to now 1995 - up to now 1995 - up to now 1995 - up to now 1995 - up to now

UC128-OBF/2 UC128-OBF/2 UC128-OBF/2 UC128-OBF/2 UC128-OBF/2 UC128-OBF/1 UC128-OBF/2 UC128-OBF/1 UC128-OBF/2 UC128-OBF/2 UC128-OBF/2 UC128-OBF/2 UC128-OBF/2 UC128-OBF/2 UC128-OBF/1

2001 - 2007

UC128-OBF/2

2000 - up to now 2004 - up to now 2004 - up to now

UC128-OBF/1 UC128-OBF/2 UC128-OBF/1

Components

Single engine - single cylinder St.wheel turn: 4.5 Up to 300 hp max

Twin engine - single cylinder St.wheel turn: 3.8 Up to: 300 hp max (non counter-reversing props); 500 hp max (counter-reversing props)

Twin engine - double cylinder St.wheel turn: 6.5 Up to: 500 hp max (non counter-reversing props); Up to 600 hp (counter-reversing props)

Cylinder Pump Pipe kit Oil Steering wheel For additional stations, add Pump Joint kit Pipe kit Oil Cylinder Pump Pipe kit Oil Connection bar For additional stations, add Pump Joint kit Pipe kit Oil Cylinder Pump Pipe kit T-joint kit Oil Conncetion bar For additional stations, add Pump Joint kit Pipe kit Oil

Codes

45.282.. 45.280.00/01 45.290.35.. 45.027.00 45.280.00/01 45.290.15 45.290.35.. 45.027.00 45.282.. 45.280.00/02 45.290.35.. 45.027.00 at 94 45.280.00/02 45.290.15 45.290.35.. 45.027.00 45.282..right/left 45.280.03 45.290.35.. standard 45.027.00 at 90 45.280.03 45.290.15 45.290.35.. 45.027.00

45 - Steering systems

APPLICATIONS 45.282.00/.01/11/12

Hydraulic steering systems

Quantity

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 2 1 2 1 1 1 1

Cylinder 45.282.00/01 is not recommended if maximum speed of the boat exceeds 60 knots

Sailing with you, since 1958

641


45

Hydraulic steering system accessories

HOW TO ORDER ITEM 45.284.01/02/03/05 Hydraulic steering system accessories

APPLICATION 45.284.01/02/03/05 CYLINDER

BOAT LENGTH MAX

45.284.01 45.284.01 45.284.02 45.284.02 45.284.02 45.284.02 45.284.03 45.284.03 45.284.03 45.284.03 45.284.05 45.284.05 45.284.05 45.284.05

8.50 m 9.50 m 11.60 m 13.40 m 9.70 m 11.60 m 13.40 m 15.20 m 11.60 m 13.40 m 18.90 m 19.80 m 18.90 m 19.80 m

HULL TYPE Gliding/Displacing Gliding/Displacing Gliding Gliding Displacing Displacing Gliding Gliding Displacing Displacing Gliding Gliding Displacing Displacing

ENGINE NUMBER

MAX TORQUE

HOW TO ORDER

1 2 1 2 1 2 1 2 2 2 1 2 2 2

up to 58 kgm up to58 kgm up to 87 kgm up to 87 kgm up to 87 kgm up to 87 kgm up to 111 kgm up to 111 kgm up to 111 kgm up to 111 kgm up to 146.5 kgm up to 146.5 kgm up to 146.5 kgm up to 146.5 kgm

Procedure 1 Procedure 1 Procedure 2 or 3 Procedure 3 Procedure 2 or 3 Procedure 3 Procedure 4 or 5 Procedure 5 Procedure 4 or 5 Procedure 5 Procedure 8 Procedure 8 Procedure 8 Procedure 8

NOTICE: The layout shown here is only indicative and in any case assumes a careful verification by the person carrying out the installation; for more information please contact our customer service office.

45 - Steering systems

SYSTEM

1 Max torque 58 kgm Steering wheel turn 4.1

2 Max torque 87 kgm Steering wheel turn 6

3 Max torque 87 kgm Steering wheel turn 5.1

4 Max torque 111 kgm Steering wheel turn 6.5

5 Max torque 111 kgm Steering wheel turn 5.5

8 Max torque 146.4 kgm Steering wheel turn 7.5

Components Pump

Cylinder Pipe kit Oil For additional stations, add Pump Joint kit Oil Pipe kit Pump Cylinder Pipe kit Oil For additional stations, add Pump Joint kit Oil Pipe kit Pump Cylinder Pipe kit Oil Steering wheel For additional stations, add Pump Joint kit Oil Pipe kit Pump Cylinder Pipe kit Oil Steering wheel For additional stations, add Pump Joint kit Oil Pipe kit Pump Cylinder 3/8" nylon tube Oil For additional stations, add Pump Joint kit Oil Pipe kit Pump Cylinder Pipe kit Oil For additional stations, add Pump Joint kit Oil

Code 45.280.00/01 45.284.01 45.290.35.. 45.027.00

Quantity 1

45.280.00/01 45.290.16 45.027.00 45.290.35.. 45.280.01 45.284.02 45.290.35.. 45.027.00

1 1 1

45.280.01 45.290.16 45.027.00 45.290.35.. 45.280.02 45.284.02 45.290.35.. 45.027.00

1 1 1

45.280.02 45.290.16 45.027.00 45.290.35.. 45.280.02 45.284.03 45.290.35.. 45.027.00

1 1 1

45.280.02 45.290.16 45.027.00 45.290.35.. 45.280.03 45.284.03 45.291.00 45.027.00

1 1 1

1 1 2

1 1 2 1

1 1 2 1

1 1 on request 2 1 1 1

45.280.03 45.290.16 45.027.00

1 1 1

2) On systems 1,2,3, 4 and 5, as an alternative to the nylon pipe, a copper pipe can be used (size 3/8” or 10 mm) For such applications it is necessary to use a kit 95 or kit 100; copper piping is recommended for commercial vessel applications

www.versilia.it

2

45.280.03 45.290.16 45.027.00 45.290.35.. 45.280.03 45.284.05 45.290.35.. 45.027.00

1) On systems 3,4 and 5, as an alternative to pipe size 3/8”, the nylon pipe size 5/16” can also be used

642

1

1 1 3


Hydraulic steering system accessories

45

HOW TO ORDER ITEM 45.282.03 APPLICATION 45.282.03. Same features of model 45.282.01 with the additional information concerning engines Johnson & Evinrude: the cylinder 45.282.03 is not required

when an assisted steering engine OMC is already fitted with cylinder model 985519, in this case use n° 2 connecting joints (ref. Parker model F6X-5 10-3/8”) Hydraulic steering system accessories

SYSTEM

Components Cylinder Pump Pipe kit Oil Steering wheel For additional stations, add Pump Joint kit Pipe kit

Single cylinder single engine Steering wheel revolutions: 4.7/5.8 Application up to 300 hp max

45.282.03 45.280.00/01 45.290.35.. 45.027.00 45.280.00/01 45.290.15 45.290.35..

Oil

Single cylinder twin engine

Steering wheel revolutions: 4/5 Application up to: 300 hp max (non contra rotating engines); 450 hp max (contra rotating engines)

Quantity 1 1 1 1

1 1 1

45.027.00

1

45.282.03 45.280.00/01 45.290.35.. 45.027.00 supplied by the engine manufacturer 45.280.00/01 45.290.15 45.290.35.. 45.027.00 45.282.03 45.280.03 45.290.35.. 45.027.00 supplied by the engine manufacturer 45.280.03 45.290.15 45.290.35.. 45.027.00

1 1 1 1

1 1 1 1 2 1 2 2

1 1 1 1

Cylinder 45.282.02 is not recommended if maximum speed of the boat exceeds 60 knots

HOW TO ORDER ITEM 45.286.01/04 APPLICATIONS 45.286.01/04

Hydraulic steering systems

ENGINE

YEAR

LEG MODEL

MERCRUISER MERCRUISER MERCRUISER MERCRUISER VOLVO VOLVO VOLVO VOLVO VOLVO VOLVO

Current Current Current Current Up to now Up to now Up to now Current Current Current

Alpha Bravo one Bravo Two Bravo Three 275 280 290 DP-E DP-G DPS

CYLINDER Ultraflex non servo-assisted motor servo-assisted motor 45.286.01 (1,3) 45.282.03 (2) 45.286.01 (1,3) 45.282.03 (2) 45.286.01 (1,3) 45.282.03 (2) 45.286.01 (1,3) 45.282.03 (2) UC168-1 N/D 45.286.01 (1,3,4) 45.280.03 45.286.01 (1,3,4) 45.282.03 45.286.01 (1,3,5) 45.286.06 N/A 45.286.06 N/A 45.282.03

45 - Steering systems

Twin cylinder twin engine

steering wheel revolutions: 6,5 Application up to 500 hp max (non contra rotating engines); up to 600 hp (contra rotating engines)

Cylinder Pump Pipe kit Oil Connection bar Steering Wheel For additional stations, add Pump Joint kit Pipe kit Oil Cylinder Pump Pipe kit Oil Connection bar Steering Wheel For additional stations, add Pump Joint kit Pipe kit Oil

Code

1) Trimmed cylinder (the total number of steering cycles is equal from either straight of right, or vice-versa) 2) Non-trimmed cylinder (the total number of steering cycles is different between straight and left, or vice-versa) 3) Minimum side space for installing cylinder: 540 mm (21.2”) as an alternative model UC132-OBS can be installed) 4) Hydraulic cylinder Ultraflex can be installed only by replacing the mechanical steering gear with cable 5) Installation requires adaptor Volvo P.N. 872388 NOTA: for installation on SX-drive engines not listed on the table, please contact our Customer Service number. NOTICE: indications are general and refer only to standard products, for special installations please contact qualified fitters. SYSTEM

1 Max torque 66 kgm Steering wheel turn: balanced 4,7 - non balanced 5,8

2 Max torque 66 kgm Steering wheel turn: balanced 4 - non balanced 4/5

Components Pump Cylinder Pipe kit Oil For additional stations, to be added Pump Connection kit Oil Pipe kit Pump Cylinder Pipe kit Oil For additional stations, to be added Pump Connection kit Oil Pipe kit

Code

45.280.01 see application 45.290.35.. 45.027.00 45.280.01 45.290.16 45.027.00 45.290.35.. 45.280.02 see application 45.290.35.. 45.027.00 45.280.02 45.290.16 45.027.00 45.290.35..

Quantity 1 1

2 1 1 1 1 1 2 1 1 1

As an alternative to nylon pipe size 3/8” the copper pipe size 3/8” or size 10 mm can be used to connect the system. Kit95 or kit100 are required for such applications.

Sailing with you, since 1958

643


44 45 fender guards & steering systems